4501921

Designed by ~ Annette Green Graphic 45® Supplies:1 each G45 Square Tag & Clock Die Set (4501686)1 pack G45 Staples - Square Tags—Kraft (4501281) 1 pack G45 Staples - Square Tags—Ivory (4501282) 1 pack G45 Staples - Square Tags—Black (4501283) 1 each Love Notes Patterns & Solids Pad* (4501827) *Any G45 collection Patterns & Solids Pad may be used for

this project, creating endless possibilities!

Additional Supplies: 1 pack 6”x 12” Scrapbook Adhesive Sheets (01682) 40” Ribbon—Black, Ivory or Red *not included*

Tools, Adhesives & Ink: Paper trimmer, scissors, scoring tool, corner rounder, ruler, double-sided adhesive, Optional: black ink & blending sponge

Notes: •Allmeasurementsarewidthxheightunlessspecified.•Optional: Ink paper edges with black ink and blending tool beforeadhering.

•Measurements in the Cutting Guides suggest sizes to pre-cut paperstomakehandlingfordie-cuttingeasier.

Square Tag & Clock Dies — Waterfall Tag Album

Graphic 45 Metal Dies & Tags Project Series

www.g45papers.com|info@g45papers.compg1of4

— Square Tag Waterfall Album —

Directions:

1.Selectthefollowing tags: 5 Black, 4 Kraft and 4 Ivory, plus one brass binderring.

2.From“RedwithIvoryMusical Instruments” cut two5”x12”pieces.Scoreeach in half at 6” and with

fold at the bottom, die-cut a square tag with 11 ⁄8” space between top of die and top

of paper as shown, making sure to have the folded edge abovethebottomofthedie.

3.Unfoldbothandsmoothoutwithabonefolder.

4.RepeatStep2using“IvorywithBlack

Words”paper.

5.Fromthescrapremaining from Step 2, cut as much as possible of the top portion of the dieasshown.Trimto1¼”highandsetasidefornow.

6.From“Red&IvoryStripe” cut two 5” x 9” pieces.Scoreeachin

half at 4½” and die cut as shown with 3 ⁄8” space from topofdietotopofpaper.

7.Unfoldbothandsmoothoutwithabonefolder.(Not shown)

8.Withraisedgrommets facing forward, you will adhere two black tags together with ¼”overlap,butFIRST,checkthefitofthepiecefrom Step 2 and make necessary adjustments.

Repeatwithtwomoreblacktags.Cutthefifthblacktagdownto3½”tallandre-roundthebottomtwocorners.

9.Adherethetwodie-cuts from Step 2 to fronts of the black tag unitsasshownonleft.

10.Flipblacktagsoverand adhere the papers from Step 4 as shown in

rightimage.

11.Fliptagsbacktothefront and adhere papers fromStep6.From“BlackwithIvoryFlourishes”cut three 45 ⁄16” x 3 ⁄8” strips and adhere to front cover andbackcoverasshown.

12.FromB-sideof“Redwith Ivory Musical

Instruments” cut a 3½” x 3½” square and do the

same from Scrapbook Adhesivessheet.Follow

instructions on the adhesive sheet to apply

tothepaperasshown.

13.Afterburnishingtheadhesive to the paper with

a bone folder, die-cut the clockandtwohands.

14.FromtheB-sideof“Black& Ivory Stripe” cut a 6” x 9” piece and the same from adhesive sheet.Apply

adhesive sheet to striped side of paper, burnish well, then die cut the doily and its center, two clocks, seven flourishes,andsixlargeclockhands(thiswilltakeseveralpassesthroughyourdie-cutter).

Graphic 45 Metal Dies & Tags Project Series

Square Tag & Clock Dies — Waterfall Tag Album

www.g45papers.com|info@g45papers.compg2of4

15.FromtheB-sideof“Red&IvoryStripe”cuta3” x 6” piece and the same fromadhesivesheet.Apply adhesive sheet to striped side of paper, then die cut clock center, six large clock hands and threeflourishes.

16.Layerthedoilyandclock pieces to the front

cover, then adhere the blackflourishesoverthe

holes of the striped paper on the front and back

coversasshown.

17.From“Blackwith Ivory Musical Instruments” die cut two full tags, one with thedieupsidedown.Trimthefirstoneto33 ⁄8” and re-round the bottomcorners.Die

cutjustthetopofathirdtagandtrimto1¼”high.

18.Adherethe33 ⁄8” piece from Step 17 to the trimmed black tag from Step 8, then adhere

on three sides to form a pocket ontheinsidefrontcover.Cut

apart the two clock die cuts from Step 14 to embellish the

backgroundasshown.

19.Fromoneivoryandonekrafttag,trim awaysidessoyouhave2¾”widetags.

20.FromB-sidesof“Red& Ivory Stripe” and

“RedwithIvoryMusicalInstruments” die cut the

square tag, then trim sides so you have 25 ⁄8” wide x 47 ⁄8” high tags

fromeach.Adheretotagsfrom Step 19 and tie a 10”

length of ribbon into a bowoneach.Setaside.

21.Seecuttingguidediagram.From“BlackwithIvoryFlourishes”diecuttwosquaretags.Cut the top of one off at 1¼”,flipthebottomtotheB-side.Cutsix3¼”x3¼”squaresfromB-side.

22.Die-cutthesquaretagupsidedownfromthreepapers:“Black&IvoryStripe,”“Redw/Ivory

Instruments,”and“Red&IvoryStripe” (you’ve already cut two

in Steps 17 & 21, and are directed to cut another in upcoming Step 24) Adhere to alternating Ivory

and Kraft tags, raised grommets facingforward.Thesewillform

thefrontofyourwaterfall.

23.FromB-sideof“BlackwithIvoryFlourishes”diecut four square tags and trim1¼”offthetops.

24.From“RedwithIvoryFlourishes”diecuttwofulltags,trim1¼”offthetopofone,thenflipbottomtotheB-side.Cutsix37 ⁄8”x1¼”strips, score down the long center at 5 ⁄8” of each and fold towardtheB-side.Burnishflatwithbonefolder.Thesearethewaterfallhinges.

Graphic 45 Metal Dies & Tags Project Series

Square Tag & Clock Dies — Waterfall Tag Album

www.g45papers.com|info@g45papers.compg3of4

25.Ontotheinsideofthe back cover, adhere thebackpartofthefirsthinge (with the fold at the top) and centered left and right.Adherethenextrightbelowit.

26.Repeatthestepswiththeremaininghinges.

27.Workingfrombottomtotop,adhere the tags for the waterfall fromStep22tothehinges’flaps.

28.Eachtagshouldsitjust above the one prior, as shown,whencomplete.

29.From“Red&IvoryStripes”and“Black&IvoryStripes” cut the tops of the square tag die so you have 1¼”highpiecesofeach.Matchupthetopswiththebottompiecesyou’vecutpreviously,asshown.

30.Flipupthefirsttaginthe waterfall and adhere the papersshown.Peelandstickaredflourishandtwoclock

hands into the space between tagsasdecoration.Repeatthisstep with the remaining pieces

and tags in the waterfall, following the order of the papersshowninStep29.

Alternate black and red clock hands&flourishesasyougo.

31.FromB-sideof“Red&IvoryStripe”and“Black&IvoryStripe”cut three 3½” x 3½” photo mats and adhere the tan photo mats fromStep21toeach.

32.Adherephotomatunitstothe front of each waterfall tag,

alternating red and black as yougo.

33.Placetwotrimmed tags into the inside front cover pocket, then join the album together with the brass book ring.Tiea10”lengthof black ribbon into a bow through the grommets on the front and back covers.

You'vefinishedtheSquareTagWaterfallAlbum! And remember, you can make this super fun

album with any Graphic 45 Patterns & Solids Pad!

Graphic 45 Metal Dies & Tags Project Series

Square Tag & Clock Dies — Waterfall Tag Album

www.g45papers.com|info@g45papers.compg4of4