Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

Embed Size (px)

Citation preview

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    1/19

    SPRINGFIELD MODEL 1861 RIFLE-MUSKET.

    Cal. 58

    Springfield Model 1861 Rifle.

    Close-up of the 1861 lock.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    2/19

    Close-up of the 1861 lock screws.

    Close-up of the buttstock.

    Close-up of the rear sight.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    3/19

    Close-up of the barrel swivel band.

    Close-up of the 1861 front sight and ramrod.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    4/19

    M1865 to M1868 US Springfield:

    GENERALLY: After the American Civil war, over a million and a half percussion muzzle-loaderswere available and in service, but were also demonstrably obsolete. Yet, financial constraints imposed by

    the great cost of the war required that if there was going to be a more modern arm introduced, it would

    have to take into consideration this vast number of arms "available" for use in some appropriate, but

    economical, fashion. The outcome was clearly not the best possible modern breachloader, but the best

    compromise to be had, given money available and the desire to obtain more service out of the existingstockpile of arms. This balancing resulted in the adoption of a breachloading mechanism to be fitted ontothe Springfield muzzle loading rifle M1863. Nominally "designed" by Springfield Armory Master Armorer

    E.S. Allin, the pattern resulted in pattent infringement suits by both W. Mont Storm and Col. Hirum

    Berdan, designer of the Spanish and Russian Berdan systems and a successful Civil War commander of

    note. The first conversions made in 1865 utilized the original .58 cal barrel but quickly proved

    unsatisfactory, both due to calibre and an exceedingly complex extractor mechanism. The next batch in

    1866 were immediately successful. These incorporated a simplified extractor mechanism and a sleeved

    barrel reducing the rifle's caliber to .50. These proved servicable enough that the M1868 was produced

    utilizing completely new (shorter) barrels, with Allin actions built on M1863 percussion rifles.

    PHOTO: The rifle shown is a US M1866 Springfield infantry Rifle converted from the M1863Springfield muzzle loading rifle.

    DISTINGUISHING CHARECTERISTICS: The M1866 is distinguished from the M1865 byit's simplified extractor and sleeved .50 caliber barrel. It is distringushed from the M1868 by it's 40"

    barrel. The M1868 is fitted with a new made, unsleeved 30 1/2" barrel. The M1865 are usually marked"1865" on the lockplate tail, the M1866's were mostly converted from M1864 percussion muzzle loaders

    and are marked "1864." The M1868's are marked "1863" or "1864" and are serial numbered on the left sideof the receiver.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    5/19

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    6/19

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    7/19

    U.S. SPRINGFIELD MODEL 1873 (AKA 1879)

    RIFLE

    Cal. 45-70 Government

    U.S. Model 1873 Rifle with Model 1879 rear sight.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    8/19

    Close-up of the Model 1873 action.

    Close-up of the Model 1873 receiver, note the post-October 1878 breechblock.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    9/19

    Top view of the Model 1873 action.

    Close-up the reverse side of the lock.

    Close-up the Model 1879 rear sight, which replaced the earlier type in 1879.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    10/19

    Top view Model 1879 rear sight.

    Close-up the Model 1879 rear sight in the open position.

    Close-up the Model 1873 buttstock.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    11/19

    Close-up the Model 1873 smooth trigger, starting

    in 1883 it was replaced by one with a corrugated face.

    Close-up of the Model 1873 markings.

    Close-up of the Model 1873 front sight and the tulip-head ramrod introduced in 1882.

    M1873 to M1888 US Springfield:

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    12/19

    GENERALLY:In 1872 trials were held to determine a "modern" new production arm to replace the

    obsolescent .50 cal rifle then in use. Repeaters not having yet been shown to be effective,it's not surprising that the military stayed with a basic action design considered "tried and

    true."

    In 1873 a "new" rifle was produced. Caliber was reduced to .45 and numerous smallchanges made, but the overall design concept remained that adopted in eight years ealier.

    During the next 15 years, this standard service arm underwent many minor revisionsculminating in the M1888. This model incorporated a unique bayonet which also served

    as a cleaning rod and was carried full time and retracted under the barrel except in use.This design innovation was driven by financial and production considerations as a new

    smokeless repeater was in the works and, the supply of Civil War bayonets having finally

    been exhausted, this provided an economical substitute.

    PHOTO: The rifle shown is a M1888 Springfield

    DISTINGUISHING CHARECTERISTICS: This rifle is fitted with a Buffington rearsight and "ramrod" bayonet. The sight is graduated to 2,000 yards incorporating a long

    range slide and an azmiuth knob which traverses the entire sight.

    MISC NOTES: The Springfield was first fitted with it's "trapdoor" implementcompartment fitted into the buttstock in 1878, being applied to the last of the M1873carbines. The M1879 Springfield rifle and all subsequent rifles carried the implement

    compartment.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    13/19

    The famed "Ramrod Bayonet.

    Allin (Berdan) action closed, weapon has been fired. (extractor is partially visible

    as the dark blued piece that pivots with the breech block. Rifle's serial number is tothe left of the hammer on the back of the receiver.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    14/19

    Hammer at half-cock (safety); Breech block open ready for re-loading.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    15/19

    Inspector's cartouch showing manufacture date of 1892.No major power's arms were retained in service during

    this transition era as long as the US kept the "Trapdoor Springfield"

    M-1888 US Springfield Ramrod Bayonet & Buffington Sight:

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    16/19

    The "ramrod" bayonet of the M1888 in its retracted position.

    underside of the M1888 showing retaining lever. To extend the bayonet the

    lever is rocked around a central spring loaded pivot utilizing the two thumb-fingerears.

    The ramrod is extended to the first detent. This is not an operational positionbut is shown simply to illustrate the detents that retain the rod when it is stowed.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    17/19

    The ramrod bayonet fully extended, locked into place at the lower pair of detents,

    and ready for business.

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    18/19

  • 7/30/2019 Springfield Model 1861 Rifle-Musket Cal. 58 - 19 Pages

    19/19

    The Buffington sight viewed from above. Buffington Sight long range leaf extended;

    The upper knob is the slide extention knob, Windage is also adjusted. The lower knob isthe windage knob.