Spraying Technology - Industrial Innovations World of Automation and Consumables Solutions Spraying Technology Manifolds, Spray Heads, & Accessories SH-3000 Single Opposed Nozzle Outlets

The World of Automation and Consumables SolutionsThe World of Automation and Consumables Solutions

Spraying TechnologyManifolds, Spray Heads,

& Accessories

SH-3000 Single Opposed Nozzle Outlets

SH-3000 DE Or SH-3000 DC Nozzle DesignDual Side-by-Side Nozzle Outlets

SH-3004 Dual Opposed Nozzle Outlets

SH-3004 QE or SH-3004 QC Nozzle DesignQuad Side-by-Side Nozzle Outlets


• Dual or Quad spray heads are available.

• Spray heads guaranteed against leakage or failure for one million cycles.

• Available in 2, 3, 4, head confi guration.

• Manifold includes blow-off-ports.

See back for more complete information and specifi cations.

The Advance Products Robot Spray Manifold was specifi cally designed to meet the challenging requirements of the die casting industry.

Quad Spray Heads(RSM-4-Q-NPT shown)

Dual Spray Heads(RSM-4-D-NPT shown)

Robot Spray ManifoldsRobot Spray Manifolds

Conf igurat ions

RSM-(A)-(B)-(C) EXAMPLE RSM-4-Q-NPT

ANUMBER OFSPRAY HEADS

2-5

BTYPE OFSPRAY HEADS

D-DUAL SH-3000DCQ-QUAD SH-03004QC

CSTANDARD

NPT USBPT BRITISH

8968 Wide Fan

8980 90° Fan

8975 Oval

8969 90° Cone

*8977 Medium Cone

8967 Medium Fan

8948 Fine Fan

*NOTE: All spray heads come with nozzle #8977 cone style.Advance Products spray nozzles can be used with any of the robotic spray manifold.

NEED A VALVE PACK AGE?Advance offers updated pre-packaged air, lube,blow off with regulators and gages.

RSM-4-Q-NPT shownUS Standard

AIR BLAST - 4 PLCS1/8 NPT TUBE FITING

AIR BLAST CONNECTION1/2 MJIC 1/4 NPT

LUBE CONNECTION3/8 MJIC 3/8 NPT

SPRAY AIR CONNECTION 1/2 MJIC 3/8 NPT

SH-3004QC -QUAD HEAD - COVER SIDESH-3000DC - DUAL HEAD- COVER SIDE

SPRAY AIR CONNECTION 3/8 BSP TAPPED HOLEFOR A HOSE FITTINGBRITISH STANDARD LUBE CONNECTION 3/8

BSP TAPPED HOLEFOR A HOSE FITTINGBRITISH STANDARD

AIR BLAST CONNECTION 3/8 BSP TAPPED HOLEFOR A HOSE FITTINGBRITISH STANDARD

AIR BLAST - 4 PLCS 1/4 BSP TAPPED HOLEFOR A TUBE FITTINGBRITISH STANDARD

RSM-4-Q-BPT shownBritish Standard

9” 0”4”6 1/2” 1 1/2” Spray manifold to robot adapters are available.

4x o 1/4” 13/16” 5/16-18 UNC - 2B 5/8” USED FOR MOUNTING

Printed in U.S.A.Specifi cations are subjectto change without notice. APC-000-2010

Industrial Innovations, Inc.- 2936 Dormax Street SW - Grandville, Michigan 49418Phone: 616-249-1525 - Fax: 616-249-0983

APC SPRAYER TO APC MANIFOLD ADAPTERS:

KIT #SPK - 1265SPK - 1266SPK - 1267SPK - 1268

ADAPTER #79484916800310101

PLATEN #4600490249029826

MANIFOLD TYPE1996 - PRESENT

1996 - 2001PRIOR 19961996 - 2001

Platen 4600(Prior to 2996)

3 Hole Manifold(Prior to 1996)

Platen 4600

4 Hole Manifold(1966 to present)

Platen 4902(1996 To 2001

Adapter4916


3 Hole Manifold(Prior to 1996)

Adapter8003

Platen 4902

Platen 9826(2002 To Present)


Platen 9826

Adapter10101

Adapter7948

4 Hole Manifold(1996 to 2001)


Manifold AdaptersManifold Adapters

www.IndustrialInnovations.com

KIT #SPK - 1270

SPK - 1271

SPK - 1264

SPK - 1249

SPK - 1269

ADAPTER #7259

12241

9713

8701

12309

DESCRIPTIONADVANCE SR-355 TO RIMROCK MANIFOLD

ADVANCE SR-1145 TO RIMROCK MANIFOLD

SINGLE ZIONE RIMROCK SPRAYER TO ADVANCE MANIFOLD

DUAL ZONE RIMROCK SPRAYER TO ADVANCE MANIFOLD

ADVANCE SPRAY HEAD TO RIMROCK MANIFOLD

APC TO RIMROCK ADAPTERS:

SPK - 1271 IS USED TO MOUNT A RIMROCKSPRAY MANIFOLD TO THE SR - 355

ADVANCE SPRAYER

SPK - 1271 IS USED TO MOUNT AN RIMROCK SPRAY MANIFOLD TO THE

SR - 1145, SR - 1155 ADVANCE SPRAYER

SPK - 1249 IS USED TO MOUNT AN DUAL ZONE SPRAY MANIFOLD TO AN

RIMROCK DUAL ZONE SPRAYER

SPK - 1264 IS USED TO MOUNT AN ADVANCE DUAL ZONE SPRAY MANIFOLD TO AN

RIMROCK SINGLE ZONE SPRAYER

SPK - 1269 IS USED TO MOUNT AN ADVANCE SPRAY HEAD TO AN RIMROCK MANIFOLD



Business Side

Why Proper Manifolds and Accessories Are Important

Consistency, repeatability, and effi ciency - three things all die casters want in their spraying systems. To achieve all three requires the proper spraying equipment. After selecting an automatic die spray system, the spraying package is the most important next step.

The manifold is the heart of the die casting spray system. Manifold selection, along with the choice of spray heads and nozzles, are signifi cant factors in achieving optimum die spraying.

Too often, little consideration is given to manifold design and usage. When you consider that spraying is the most time consuming part of the total casting cycle, it is important to select a manifold that will:

• reduce cycle time• give you a consistent, quality part• reduce labor• be easy to maintain• will not leak

Production Improvements - Cycle Time

As a rule of thumb, spraying should be less than 20% of total cycle time. Many die casters are spraying for 30-40% of the cycle time, which is a huge waste of time. Many years ago, Advance devised a formula that works well in determining proper spraying time. The formula states you should spray one second for every 100 ton of the size of the die cast machine. Add one second per slide and one second for a second spray zone. For example, for an 800-ton DCM with two zones and two slides, your spray time is:

1 sec. x 8 + 1 (additional zone) + 2 (slides) = 11 seconds.

Positioning Accuracy

Digital servo control gives Advance reciprocatorspositioning accuracy within .020”. This repeatabilityis important for maintaining control of the process.

• reduce cycle time• give you a consistent, quality part• reduce labor• be easy to maintain• not leak

Business Side

Quality Issues

How you spray determines the quality of your part. Proper spraying:

• Produces more consistent, shippable parts• Produces more presentable, shiny parts• Reduces scrap• Increases die life• Increases machine up-time

It is important to understand that quality drives production schedules, which translates into MONEY. If you have consistent, quality parts, it is easier to calculate the number of shippable parts made per hour. This translates into better prediction of shipping schedules, which, in turn, controls production schedules.

Environmental and Safety Issues

In addition to producing more shippable parts and reducing labor, automatic spraying is safer than hand spraying. Automatic spraying it takes the operator away from the fumes and the opening and closing of the die casting machine. This can reduce workers’ compensation premiums and make for a safer plant environment.

Summary

Proper automatic spraying with the right manifold, spray heads, and nozzles will reduce cycle time and labor and give you more consistent, usable parts. It is this consistency, repeatability, and effi -ciency of automatic spraying that make it so vital to your production and your bottom line.

AUTOMATION MEANSConsistency

Process RepeatabilityEffi ciency

Safer EnvironmentMore Shippable Part

Better SchedulingMore Profi ts

Manifold Design/Selection

How to DesignYour Manifold

(1) Determine the relative size of the manifold. Use either the die layout drawing, actual casting size, etc.

(2) Determine where you need to spray the die. Highlight the problem areas that may need more cooling.

(3) Decide how you want to spray the die. For example, is a bar (sweep) manifold suit-able or is a more complex Picture Frame®

manifold needed? Do you want to spray with one or two zones of spray?

Single Bar, Single Spray Zone

Single Bar, Dual Spray Zone

Dual Bar, Dual Spray Zone

LGTH PART#

13” 9805 19” 9806

LGTH PART#

25” 9807 31” 9808

LGTH PART#

13” not available 19” 9806

LGTH PART#

25” 9807 31” 9808

LGTH TOP BTM

25” 9807 9816 31” 9808 9818

LGTH TOP BTM

13” 9805 9812 19” 9806 9814

Picture Frame® Manifolds

If your die is more complex or you want to spray the die from one fi xed point, a Picture Frame® Manifold may be suitable. They are our most popular manifolds and come in a multitude of standard sizes to fi t most any application. (See chart at right).

Picture Frame®

Manifolds typically produce the shortest spray time. They are available in both single and dual zone capability.

Part #

NPF-1711-DNPF-1714-DNPF-1717-DNPF-1720-DNPF-1723-DNPF-1726-DNPF-1729-DNPF-2311-DNPF-2314-DNPF-2317-DNPF-2320-DNPF-2323-DNPF-2326-DNPF-2329-DNPF-2332-DNPF-2911-DNPF-2914-DNPF-2917-DNPF-2920-DNPF-2923-DNPF-2926-DNPF-2929-DNPF-2932-DNPF-2935-DNPF-3511-DNPF-3514-DNPF-3517-DNPF-3520-DNPF-3523-DNPF-3526-DNPF-3529-DNPF-3532-DNPF-3535-D

Size Available SprayHead LocationsWidth x

Height(Inches)

17 x 1117 x 1417 x 1717 x 2017 x 2317 x 2617 x 2923 x 1123 x 1423 x 1723 x 2023 x 2323 x 2623 x 2923 x 3229 x 1129 x 1429 x 1729 x 2029 x 23 29 x 2629 x 2929 x 3229 x 3535 x 1135 x 1435 x 1735 x 2035 x 2335 x 2635 x 2935 x 3235 x 35

Components Requiredfor Each Assembly

Top Frame Part # Bottom Frame Part # Side Frame Part # Zone 1 Zone 2

980598059805980598059805980598069806980698069806980698069806980798079807980798079807980798079807980898089808980898089808980898089808

981298129812981298129812981298149814981498149814981498149814981698169816981698169816981698169816981898189818981898189818981898189818

981098119812981398149815981698109811981298139814981598169817981098119812981398149815981698179818981098119812981398149815981698179818

91113151719211315171921232527171921232527293133212325272931333537

81012141618201012141618202224141618202224262830182022242628303234

Picture Frame® Manifold Sizing Chart

Zone 1 SprayHead Locations Zone 2 Spray

Head Locations

Manifold Par ts

Let’s look at some accessories that can help you in the placement of the spray heads. At Advance, we believe that permanent designed manifolds are better than extension tubes coming out of the head.

Hard manifolds do not go out of adjustment and make die changeover quick. Also, with Advance’s straight-in-the-die travel, reciprocator die openings can be reduced. This produces greater die spraying effi ciency and less over spray and run off. By reducing the die spray opening needed, faster cycle rates can be achieved.

STANDOFFS are available in 1-inch increments and are supplied with O-rings and bolts.

ON-PLANE T’s can beattached to the end of the exten-sion providing the availability of two spray heads from one spray head location. Come complete with O-rings and fasteners.

LENGTH PART #

1-inch 4952-008 2-inch 4952-016 3-inch 4952-024 4-inch 4071-032 5-inch 4071-040 6-inch 4071-048 7-inch 4071-056 8-inch 4071-064

STANDOFFS

OFF-PLANE T’s attach to the end of the extension and are used to project two spray heads toward the die cavity. Comes complete with O-rings and fasteners.

OFF-PLANE T’S

LENGTH PART # 6-inch 4072-6

ON-PLANE T’S

4924CORNERGUSSET

4924CORNERGUSSET

TOPMANIFOLD

BOTTOMMANIFOLD

4072-6ON-PLANE

T

4073-6OFF-PLANE

T

4952STANDOFF

SIDEMANIFOLD

4688-XXAIR

BLAST

4914CORNERBLOCK

4914CORNERBLOCK

0921-024ALIGNMENT

SLEEVE

0118-020SOCKET

HEADCAP SCREW

4071STANDOFF

4067BLANKING

PLATE

4079O-RINGS

QC-0913-MFQUICK CHANGE

MANIFOLD ADAPTER

QUICK CHANGE MANIFOLD ADAPTERS allow for fast manifold exchange without tools for quick and easy die setup.

LENGTH PART # 6-inch 4073-6

• Wide range of spray volumes from ultra-fi ne mist toheavy dosing.

• Not dependent on the same air and lube pressures.In fact, the independent air and lube pressurescan vary from 40 to 110 psi without affecting each other.

• .5 gpm per each nozzle outlet.• No-leak construction GUARANTEED. Advance’s new

positive shutoff doesn’t permit leaking.• Either internal or external mix nozzle outlets can be

used on the same head. An Advance exclusive!• All internal parts are warranted for 1,000,000 cycles

against leakage. Body warranted for 10 years.

FEATURES

Model 3000 Spray Heads

After years of research and development, Advance, the industry leader in spraying technology, has developed the ultimate spray head for die spraying; the Advance ModelSH-3000 spray head.

The Model SH-3000 has fewer parts and an improved design. Adjustablility is greatly improved with a full three-turn range compared to 1-1/2 on the Model 2000. There is also improved atomization consistency over a larger variation of air to lube pressure.

The Model SH-3000 offers a wide range of spray patterns with nine interchangeable nozzles from ultra-fi ne mist to maximum output. Various extension tubes are also available. Air and lube pressures can be set independently and are adjustable from 40 to 110 psi.

The spray head is also retrofi ttable on any of our spraying reciprocators. Manifold conversions are availabe for any brand of sprayer.

All internal parts are warranted for 1,000,000 cycles. The spray head body has a 10-year warranty.

Spray Head Foot Print1-1/2” x 2”

8962 (O-ring)

050-0089(Needle Assembly)

8949 Needle 8983 O-ring

8953 (Nozzle Seat)*Nozzle 8977

(Standard)8959 (Set Screw)

9926 (Poppit Assembly) 8966 Rubber Seat

8955 Spray Head Poppit

8963 (O-ring)

8984 (O-ring)

10463 (Conical Spring)

8960 (Socket Head Cap Screw)

8950 (Top Cap)

8947 (Body SH-3000 Opposed)

8970 (Nozzle Retainer)

8975 Oval

*8977 Medium Cone

8969 90° Cone

8948 Fine Fan

8968 Wide Fan

8980 90° Fan

8967 Medium Fan

SH-TUBE-001 1/4” O Tube (2”)

SH-TUBE-002 1/4” O Tube (4”)

SH-TUBE-003 1/4” O Tube (6”)

DUAL NOZZLE DESIGN

Need more lube in a concentrated area? Try the new Advance Dual Nozzle spray head, ideal for ejector side.The head features two nozzles on one side of the head and comes with two nozzles of your choice.

To order SH-3000 Spray Head with specifi c nozzles, other than the standard #8977, cross reference spray head with the desired nozzle:

Nozzle Design SH-3000 Dual Nozzle SH-3000 Dual Nozzle Ejector Side Cover Side(SH-3000DE) (SH-3000DC)

8977 (Standard) SH-3000DE-8977 SH-3000DC-89778967 SH-3000DE-8967 SH-3000DC-89678969 SH-3000DE-8969 SH-3000DC-89698948 SH-3000DE-8948 SH-3000DC-89488968 SH-3000DE-8968 SH-3000DC-89688980 SH-3000DE-8980 SH-3000DC-89808975 SH-3000DE-8975 SH-3000DC-8975SH-TUBE-001 SH-3000DE-T-001 SH-3000DC-T-001SH-TUBE-002 SH-3000DE-T-002 SH-3000DC-T-002SH-TUBE-003 SH-3000DE-T-003 SH-3000DC-T-003

SH-3000 Double Opposed Outlet (SH-3000) SH-3000-8977 SH-3000-8967 SH-3000-8969 SH-3000-8948 SH-3000-8968 SH-3000-8980 SH-3000-8975 SH-3000-T-001 SH-3000-T-002 SH-3000-T-003


Dual Nozzle DesignSingle Opposed Nozzle Outlets

Tube Style/Length

MODEL SH-3000 & SH-3004

Sprayheads, Extensions & Accessories

Figure 2

Figure 1

Figure 3

Figure 4

SH-3000

SH-3004

Figure 2: SH-TUBE-001, SH-TUBE-002, and SH-TUBE-003 consist of: 4079 (O-ring), 9649 (adapter noz-zle to tube), 5998 (adapter 1/8 mnpt to 1/4 tube), 9903-016 (2” tube), 9903-032 (4” tube), 9903-048 (6” tube).

Figure 1: SH-TUBE-000 consists of: 8962 (O-ring), 8953 (nozzle seat), (spray head nozzle), 8970 (nozzle retainer).

Figure 3: SH-TUBE-004, SH-TUBE-005, and SH-TUBE-006 consist of: 4079 (O-ring), 9649 (adapter nozzle to tube), 5998 (adapter 1/8 mnpt to 1/4 tube), 9628-016 (2” tube), 9628-032 (4” tube), 9628-048 (6” tube).

Figure 4: SH-TUBE-007, SH-TUBE-008, and SH-TUBE-009 consist of: 4079 (O-ring), 9649 (adapter noz-zle to tube), 5998 (adapter 1/8 mnpt to 1/4 tube), 9628-016(2” tube), 9628-032 (4” tube), 9628-048 (6” tube).

• Wide range of spray volumes from ultra-fi ne mist toheavy dosing.

• Not dependent on the same air and lube pressures.In fact, the independent air and lube pressurescanvary from 40 to 110 psi without affecting each other.

• .5 gpm per each nozzle outlet.• No-leak construction GUARANTEED. Advance’s new

positive shutoff doesn’t permit leaking.• Either internal or external mix nozzle outlets can be

used on the same head. An Advance exclusive!• All internal parts are warranted for 1,000,000 cycles

against leakage. Body warranted for 10 years.

The Model SH-3004 has fewer parts and an improved design. Adjustablility is greatly improved with a full three-turn range compared to 1-1/2 on the Model 2000. There is also improved atomization consistency over a larger variation of air to lube pressure.The Model SH-3004 offers a wide range of spray patterns with nine interchangeable nozzles from ultra-fi ne mist to maximum output. Various extension tubes are also available. Air and lube pressures can be set independently and are adjustable from 40 to 110 psi.The spray head is also retrofi ttable on any of our spraying reciprocators. Manifold conversions are availabe for any brand of sprayer.All internal parts are warranted for 1,000,000 cycles. The spray head body has a 10-year warranty.

FEATURES


SH-TUBE-001 1/4” O Tube (2”)

SH-TUBE-002 1/4” O Tube (4”)

SH-TUBE-003 1/4” O Tube (6”)

*8966 Rubber Seat*8955 Spray Head Poppit

*8949 Needle*8983 O-ring

8960(Socket Head Cap Screw)

8950 (Top Cap)

10463 (Conical Spring)

8984 (O-ring)

9926 (Poppet Assembly)

8963 (O-ring)

050-0089 (Needle Assembly)

12240 (Body SH-3004)

8959 (Set Screw)

8962 (O-Ring)

8953 (Nozzle Seat)

Spray Head Foot Print1-1/2” x 2”

*Nozzle 8977 (Standard)

8975 Oval

*8977 Medium Cone

8969 90° Cone

8948 Fine Fan

8968 Wide Fan

8980 90° Fan

8967 Medium Fan

8970 (Nozzle Retainer)

QUAD NOZZLE DESIGNNeed more lube in a concentrated area? Try the new Advance Quad Nozzle spray head, ideal for ejector side.The head features four nozzles on one side of the head and comes with four nozzles of your choice.

Quad Nozzle DesignDual Opposed Nozzle Outlets


Nozzle Design SH-3004 Quad Nozzle SH-3004 Quad Nozzle Ejector Side Cover Side

(SH-3004QE) (SH-3004QC)8977 (Standard) SH-3004QE-8977 SH-3004QC-89778967 SH-3004QE-8967 SH-3004QC-89678969 SH-3004QE-8969 SH-3004QC-8969 8948 SH-3004QE-8948 SH-3004QC-89488968 SH-3004QE-8968 SH-3004QC-89688980 SH-3004QE-8980 SH-3004QC-89808975 SH-3004QE-8975 SH-3004QC-8975SH-TUBE-001 SH-3004QE-T-001 SH-3004QC-T-001SH-TUBE-002 SH-3004QE-T-002 SH-3004QC-T-002SH-TUBE-003 SH-3004QE-T-003 SH-3004QC-T-003

SH-3004 Quad Opposed Outlet (SH-3004) SH-3004-8977 SH-3004-8967 SH-3004-8969 SH-3004-8948 SH-3004-8968 SH-3004-8980 SH-3004-8975 SH-3004-T-001 SH-3004-T-002 SH-3004-T-003

To order SH-3004 Spray Head with specifi c nozzles, other than the standard #8977, cross reference spray head with the desired nozzle:

SERIES TUBE STYLE / LENGTH NOZZLE

None* (SH-TUBE-000)1/4” copper/2” (SH-TUBE-001)1/4” copper/4” (SH-TUBE-002)1/4” copper/6” (SH-TUBE-003)1/2” alum. straight/2” (SH-TUBE-004)1/2” alum. straight/4” (SH-TUBE-005)1/2” alum. straight/6” (SH-TUBE-006)1/2” alum. 90o/2” (SH-TUBE-007)1/2” alum. 90o/4” (SH-TUBE-008)1/2” alum. 90o/6” (SH-TUBE-009)

* Note: No nozzle required with 1/4” copper tube

AVAILABLE NOZZLES/TUBES STYLE

O

O

8969 90 Cone

8948 Fine Fan

8968 Thick Fan

8980 90 Fan

8975 Oval

8977 Narrow Cone**

8974 Wide Fan

**Note: SH-TUBE-001, SH-TUBE-002, and SH-TUBE-003 consist of:4079 (O-ring)9649 (adapter, nozzle to tube)5998 (adapter, 1/8 mnpt to 1/4 tube)9903-016 (2” tube), 9903-032 (4” tube),9903-048 (6” tube).

SH-TUBE-003 1/4” O Tube (6”)**

SH-TUBE-002 1/4” O Tube (4”)**

SH-TUBE-001 1/4” O Tube (2”)**

SH-3000 (Dual - Quad Outlet SH-3004 Opposed Side)SH-3000DC (Dual - Quad OutletSH-3004DC Cover Side)SH-3000DE (Dual - Quad OutletSH-3004DE Ejector Side)

** Note: Standard nozzle with the purchase of all spray heads



Operates with either siphon or pressure systems.

The hand spray gun offers a balanced feel and easy grip for maximum operator comfort and helps reduce operator disability claims.

Easy-to-adjust individual air and lube volume screws.

A large 2-stage trigger for just air to air/lube mix, from a very fi ne mist, to a heavy concentrated spray.


Hand Spray Gun Dual AdjustmentsHand Spray Gun Dual Adjustments

Available in Three Tube Lengths:

14” 20” 25”

HSG14 HSG20 HSG25

Lengths

HSG25

HSG20

HSG14

Chrome Plated Steel

Spray Gun Part #HSG-14HSG-20HSG-25

Description14” Spray Tube (Chrome Plated)20” Spray Tube (Chrome Plated)25-1/2” Spray Tube (Chrome Plated)

Description Spray Gun Handle, Complete Nozzle 14” Chrome Tubing Model HSG-14 20” Chrome Tubing Model HSG-20 25-1/2” Chrome Tubing Model HSG-25 Lever Cotter Pin Lube Cap Lube Valve Air Cap Without Ring Lube Valve Spring Lube Regulating Screw Air Regulating Screw Air Valve Air Valve Spring Lube Hose Connector (1/8” Barb I.D.) Air Hose Connector (1/4” Barb I.D.) Air Nipple Lube Nipple

Part #HSG-HANDLE 4965 4966 4967 4968 4971 4972 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4989 4990

4965

496649674968992799289929

4971

4972

4974

4975

4977

4976

4978 4979

4980

4981

4989

4982

4990

4983

Printed in USASpecifi cations are subjectto change without notice. APC-110-2011

2-stage Lube & AirValves For Fine MistOr Heavy Concentrated

Handle And LeverDesigned For MinimumHand Extension

Air & Lube Connectors For Fast, Easy Hook UpTo Siphon Or PressureSystem

Chrome PlatedTubing & Fittings

Lube & AirAdjustments

Solid Construction For Long Life With Fast, InexpensiveParts Replacement

Relaxed Grip Helps Prevent Painful Carpal Tunnel Syndrome


Documents

Spraying Technology - Industrial Innovations World of Automation and Consumables Solutions Spraying Technology Manifolds, Spray Heads, & Accessories SH-3000 Single Opposed Nozzle Outlets