Spotalarm 2.0English manual

AboutSpotalarm is developed and distributed by b4print.se in the fall of 2010. Spotalarm 1.1 is tested in Macworld magazine, Sweden (No. 6-2011) and received 4 out of 5 stars. Spotalarm has now reached version 2.0 and has been completely revised and many new features are added. Spotalarm is designed for you to be able to wake up to your Spotify music. But with version 2.0 you can add any links whatsoever, such as YouTube for example, without any restrictions. The basic principle is to launch your selected music at a selected time. Consult this manual to learn more about how the new Spotalarm works.

At the bottom of the app there are always the four main buttons visible:Main view - displays current informationAlarm view - set the alarm time and signalMusic view - add music linksSetup view - basic settings

Note this- The app is designed for iOS 5 or above but works fine with iOS 4.- Spotify premium account is required to use Spotify links.- Internet connection is required.- Make sure the volume is not muted and is set to a suitable level.- Turn off Safari Private Browsing otherwise the app can´t access the music.- Make sure iPhone Notification for the app is on for alert and sounds.

For more information please contact B4print.se at info@b4print.se

Spotalarm is not affiliated with Spotify and SPOTIFY is the registered trademark of Spotify Group.

Main viewThis is the main view where all information is visible:• Alarm time, if the alarm is activated• Alarm signal if the alarm is activated• Time and date• Battery status, shows information of the battery• Backup time, showing the setting of when the backup alarm will alert• Battery alarm, displays if the battery alarm is on or off.• Internet access, shows if you have internet access or not.

< Logo

< Alarm time< Alarm signal

< Time

< Date

< Extended display

< Four main buttons

Alarm viewHere you set the alarm time and select what sound or music to wake up to.Top of the display is the [Help] button where you can watch video help, send e-mail, visit our website, log on to our Facebook or why not rate the app in the AppStore. We prefer your comments and improvements by e-mail.

How to set an alarm (assumes that you added music in the music view):1. Click [Alarm time].2. Choose a time for the alarm.3. Click [Close timepicker].4. Click [Alarm Signal].5. Select the music or the signal to sound at alarm.6. Click [Done].7. Activate the alarm by pulling the top button [Activate the alarm] to state [1].8. If you want you can test the signal by pressing the [Test alarm] button.9. Return to Main View by pressing the ”Spotalarm icon” at the bottom left.Now it shows the alarm on the display.

Music viewHere you add links of music. The maximum number of links is limited to 25.

The buttons:[Get music] - gives you quick links to open Spotify and YouTube.[+] - opens a new window where you paste your link and name the link.[Edit] - allows you to rearrange any way you want by dragging the symbol [ ]. You can also delete a link here. Another way to delete a link is by swiping your finger from right to left on the current line to bring up the [Delete] button.

How to add a Spotify link:1. Click [Get music] and select Spotify or launch Spotify app manually.2. Choose a song you want to add.3. When the song starts playing, press pause.4. Click the center of the cover picture.5. Click [Share Track].6. Click [Copy to Past Board].7. Close Spotify and open Spotalarm again.8. Click [+].9. Name the song on the field at [Name].10. Click on the field at [Link] under the name you just typed.11. Click until the [Paste] is visible and select it. Your link is now pasted in here.12. Click [Done].Your new link is now added in the list and is selectable in the Alarm view.

How to add a YouTube link:1. Click [Get music] and select YouTube or launch YouTube app manually.2. Select a video to add. When the video begins playing, press the pause.3. Press the [Share] symbol.4. Select [Mail Link to this Video].5. Select the entire link, including the http://...6. Press [Copy].7. Press [Cancel].8. Select [Delete Draft].9. Close Youtube and open Spotalarm.10. Click [+].11. Name the song on the field at [Name].12. Click on the field at [Link] under the name you just typed.13. Click until the [Paste] is visible and select it. Your link is now pasted in here.14. Click [Done].Your new link is now added in the list and is selectable in the Alarm view.

How to add other links:1. Select an iphone compatible link from Safari.2. Select the entire link, including the http://...3. Press [Copy].4. Close Safari and open Spotalarm.5. Click [+].6. Name the link on the field at [Name].7. Click on the field at [Link] under the name you just typed.8. Click until the [Paste] is visible and select it. Your link is now pasted in here.9. Click [Done].Your new link is now added in the list and is selectable in the Alarm view.

Setup viewThis sets the basic settings. Top of the display is the [Help] button where you can watch video help, send e-mail, visit our website, log on to our Facebook or why not rate the app in the AppStore. We prefer your comments and improvements by e-mail.

Backup signalHere you select what sound you want as the backup signal.

Backup timeSpecifies how many minutes after the regular alarm the backup alarm will alert

Battery AlarmHere you select whether the battery alarm should be on or off. Battery alarm goes on if the battery capacity is below 10%.

Extended displayHere you select whether to display detailed information about the battery, backup and internet on Main wiew or not.

Show clockHere you select whether the clock should appear on the Main wiew or not.

Show dateHere you select whether the date should appear on the Main wiew or not.

Badge on iconHere you select if a badge should appear on the icon when the alarm is activated.

Dim screenHere you set the brightness of the Main wiew.

B4print.se