Upload
voxuyen
View
216
Download
2
Embed Size (px)
Citation preview
— A B B M E A SU R EM ENT & A N A LY TI C S | COU R S E DE SCR I P TI O N
SpiritIT Flow-X seriesHigh accuracy flow computers
Learn to work with the SpiritIT Flow-X flow computer and become a professional.
Level 1 / Level 2To make the SpiritIT Flow-X training suitable for every engineer the training exists out of two courses; Level 1 and Level 2.
As SpiritIT Flow-X beginner you start with the Level 1 course. In this course you learn the basics of Flow-X, such as the setup of the Flow-X, connect I/O & debug the communication with other devices.
If you want to configure your own SpiritIT Flow-X applications or modify existing, you will need the Level 2 course. In this course you will become a professional SpiritIT Flow-X user, which can make or modigy gas/liquid applications, displays, (custom) calculations, reports and communication lists.
On the back of this flyer you can find more information on both courses.
Who?• Level 1 is for the service engineer, that comes in
contact with SpiritIT Flow-X during its work.• Level 2 is for the (metering) engineer, that wants
to configure or modify SpiritIT Flow-X applications.
What’s included?• A license of SpiritIT Flow-Xpress• Full Tutor support, including Technical Support
after the training.• Access to the download section of our website,
containing new software releases.
Requirements• A laptop with Windows 7, Windows Server 2008 R2,
Windows 8 or Windows Server 2012 with Excel 2007 SP2 and higher or Excel 2010/2013/2016 preinstalled;
• Extensive knowledge of flow computers in general;• Knowledge of some specific flow computer in
detail;• Basic or advanced knowledge of metering for the
oil & gas industry.
CD
/Flo
wX
-EN
Rev
.A 1
1.20
17
—We reserve the right to make technical changes or modify the contents of this document without prior notice. With re-gard to purchase orders, the agreed par-ticulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations con-tained therein. Any reproduction, disclo-sure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB. Copyright© 2017 ABBAll rights reserved
—ABB B.V.Prof. Dr. Dorgelolaan 205613 AM EindhovenThe NetherlandsMail: [email protected]
abb.com/midstream
Level 1During the level 1 course you will:• Get an introduction to the SpiritIT Flow-X
architecture, hardware, key concepts and user tools;
• Learn to operate and configure the flow computer with a selected template application;
• Learn to setup the inputs and outputs for connection to field devices.
ParticipantsCommissioning / Service engineers
Time2 days
Costs€1250,-This includes all training materials, manuals, licenses and lunches.
Level 2During the level 2 course you will:• Learn to configure a basic application template;• Learn to use displays, alarms, reports, etc;• Learn to communicate with external devices
(Modbus and HART);• Learn to use the SpiritIT Flow-Xpress software for
powerful flow calculations;• Learn how to off-line and on-line test your SpiritIT
Flow-Xpress application.
ParticipantsProject / Metering engineersCompleted SpiritIT Flow-X Level 1 course succesfully. 1 Year of experience with SpiritIT Flow-X is advised.
Time2 days
Costs€1550,-This includes all training materials, manuals, licenses and lunches.