Upload
vuminh
View
235
Download
0
Embed Size (px)
Citation preview
DELTA FLUID PRODUCTS LIMITED
SPERRYNGAS CONTROLS
Domestic and Non-Domestic Meter Regulators
Industrial Regulators
Medium Pressure Regulators
G940/G941 - Domestic Meter RegulatorDomestic regulator offering high performance in a compact unit.
Sizes: ¾" & 1" - BS21 Pi max 350 mbar - G940
Capacity: 6 m3/hr Pi max 250 mbar - G941
Style: Angled Po up to 40 mbar
Options: Automatic Low Pressure Cut Off (G941) • Paint finish
Standards: Approved to EN88 • Meets British Gas Industry requirements
Ask for data sheet G940/941
G1000M - Non - Domestic Meter RegulatorsHigh performance commercial and industrial meter regulators, designed for diaphragm and RPD meters.
Sizes: Screwed Pi max 350 mbar
1¼", 1½", & 2" Po up to 80 mbar
Inlet - BS21
Outlet - Brass meter union threads to BS 746
Flanged DN80
Type - PN16 Others on request
Style: Angled
Options: Pressure test point • External impulse • Paint finish
Standards: Approved to EN88 • Meets British Gas Industry requirements
Ask for data sheet G1000m
G1000C Compact & G1000 - Industrial RegulatorsHigh performance commercial and industrial regulators, suitable for all low pressure regulating and metering applications.
Sizes: G1000C - Compact Pi max 350 mbar
½", ¾" & 1" - BS21 Inlet & Outlet Po max up to 80 mbar
G1000
1", 1¼", 1½" & 2" - BS21 Inlet & Outlet
Flanged DN80 & DN100
Type - PN16 Others on request
Style: Straight
Options: Pressure test point • External impulse • Paint finish
Standards: Approved to EN88 and AGA • Meets British Gas Industry requirements
Ask for data sheet G1000C or G1000
G5000 - Medium Pressure RegulatorMedium pressure regulator suitable for 2nd & 3rd family gases
Sizes: Screwed ¾" & 1" Pi max 8 bar
Flanged DN25 Po up to 100 mbar
Options: OPSO: Over Pressure Slam Shut
Relief Valve: Full or Limited
UPSO: Under Pressure Shut Off
Pressure test point
Style: Straight - 360° orientation with variable vent position
Standards: British Gas Industry requirements
Ask for data sheet G5000
Process Control
Safety Valves
Packaged Regulating Units
G1100 - Zero Regulator & G1200 Proportionator Mechanical Valves for Air/Gas Ratio Control on Industrial Gas Equipment
Sizes: ¾", 1", 1¼", 1½", & 2" Pi max 350 bar
Style: Straight
Ask for data sheet G1100 or G1200
PitsBelow ground regulating units, single stage for medium pressure
Options: Single or Twin Stream G5000 Regulator with OPSO
Regulators & Limited Relief
PE Inlet/Outlet Fittings Pi max 4 bar
By-pass provision Po up to 100 mbar
Complete Installation including Ball Valves, Filters & Cover
Ask for data sheet Pits
KiosksAbove ground regulating units with concrete locking base, single stage for medium pressure
Options: Single or Twin Stream G5000 Regulator with OPSO
Regulators & Limited Relief
PE Inlet/Outlet Fittings Pi max 4 bar
By-pass provision Po up to 100 mbar
Complete Installation including Ball Valves, Filters & Housing
Ask for data sheet Kiosks
R1000 - Relief ValveValves for full over pressure protection and creep relief
Sizes: ¾", 1", 1¼", 1½", & 2" - BS21 Pi max 350 bar
Style: Straight
Relief Pressure set to customer requirements
Ask for data sheet R1000
L1000 - Low Pressure Cut OffValves for under pressure protection with manual reset
Sizes: Screwed ¾", 1", 1¼", 1½", & 2" - BS21 Pi max 350 bar
Flanged DN80
Style: Straight
Cut Off Pressure set to customer requirements
Ask for data sheet L1000
Metering Accessories
Brass Meter UnionsFull range of meter union connectors including slotted and lugged types, the rangeincludes the following, however, all sizes and configurations are available.
5709MS ¾" Male BS21 x 1" Female Meter Connection to BS746
5708MS 22mm Male Capillary Connection x 1" Female Meter
Connection to BS746
Cap nuts available in a wide range of sizes and thread patterns,
washers to suit also available.
Firesafe Meter Control and Isolation ValvesFiresafe Ball Valves & Taper Plug Cocks for medium and low pressure gasinstallations manufactured to BS1552
Firesafe Meter Control Ball ValvesMaintenance Free Valves
Straight Version
Sizes: ¾" Female Inlet x ¾" Male Outlet
1" Female Inlet x ¾" Male Outlet
1" Female Inlet x 1" Male Outlet
Angled Version
Sizes: ¾" Female Inlet x ¾" Male Outlet
¾" Female Inlet x 1" Male Outlet
Options: Male connection BS746 or 60° Cone • Female BS21
Maximum Pressure 5 bar
Low Pressure Firesafe Taper Plug Cocks
Long life, low maintenance valves
Sizes: 1½" & 2"
Maximum Pressure 350 mbar
Installation KitsSperryn offer domestic, commercial & industrial meter installation kits to cover thefull range of diaphragm and selected RPD meters, all are boxed or bagged with allcomponents required to offer trouble free installation.
Domestic Kits
Stage 1 Typically includes Transition Fitting, Meter Control
Valve, Blanking Caps and Washers.
Stage 2 Typically includes Meter Union Flex, Regulator,
Inlet/Outlet Union and Washers.
Commercial & Industrial Kits
Typically these Meter kits include all the components required to
make the installation, packed in one box, including regulator, flex,
nuts, bolts and gaskets/seals.
Over 100 years experience
Sperryn Gas Controls, part of Delta Fluid Products
Ltd, has been at the forefront of the international
gas industry since 1889.
Development programme
The Sperryn product range is extensive and with
our commitment to research and development in
line with market needs the range is destined to
grow further in the near future. A continuous
programme of new and existing product
development using the latest design and
manufacturing technology is a prerequisite for any
company who wishes to lead the way in the gas
industry.
Sperryn’s commitment to this process can be seen
in all products, for example, by using the latest
design facilities and technologies, Sperryn Gas
Regulators have increased capacity, accuracy and
lower pressure drops.
Production engineering expertise
Sperryn is proud of its production engineering
capability, developed and focused on the specific
requirements of the gas industry. This expertise
allows greater flexibility in terms of production
volume whether it is one piece or 50,000 pieces to
match customer needs.
From Sperryn’s own brass stamping, machining
and assembly facilities all elements of the
manufacturing process are controlled “in house”.
This helps to control costs, improve service levels
and maintains a strong competitive advantage.
Quality to depend on
As a leading manufacturer of high performance
components for the gas industry, Sperryn naturally
is committed to quality. Our quality system is
independently certified to ISO 9001 accreditation.
However, we realise that the search for quality
means more than just a certificate. Every member
of our team has total commitment to quality,
backed up with an active staff-training programme
certified to Investors in People accreditation. Every
aspect of the companies operations from raw
materials purchased to final product despatch is
carefully monitored to ensure that consistency and
efficiency is top of everyone’s priority list.
Extensive range
As well as manufacturing an extensive range of
gas control valves, Sperryn also supplies
component kits for meter installation, working
alongside many meter manufacturers to achieve
the best metering solutions. We also offer a wide
variety of other component packages, including
Regulating Sets and Pressure Reduction Modules,
each designed with safety, capacity and cost
effectiveness in mind.
Service
The Sperryn world market is becoming increasingly
demanding and whatever natural gas, coal gas or
LPG/air is being used, Sperryn have a gas valve,
component or solution, which the customer can
depend on. To enable us to stay at the forefront in
world markets every member of our highly trained
and motivated staff are determined to supply a
world class customer focused service. Wherever
our customers are in the world, our expertise is
available to offer support and advice.
Wherever you are in the world,
we all share a common
language - Gas.
Total Quality - Total Confidence - Total Solutions
Delta Fluid Products Ltd
Delta Road, St. Helens WA9 2ED
Telephone: +44 (0)1744 611819
Fax: +44 (0)1744 26791
Email: [email protected]
www.deltafluidproducts.com
An approved supplier
to BS EN ISO 9001
Registered No. Q5975
Distributed by:
SPERRYNGAS CONTROLS
INVESTOR IN PEOPLE
www.deltafluidproducts.com
Whereas Delta Fluid Products Limited has, at the time of publishing, made all reasonable efforts to ensure theaccuracy of the information detailed in this publication;
Delta Fluid Products Limited can in no way warrant the information herein contained.For confirmation and written quotations, please contact Delta Fluid Products Limited.
Copyright © Delta Fluid Products Limited. Reproduction or electronic storage of any of the material contained in thispublication cannot take place without the prior consent and approval of Delta Fluid Products Limited.