Upload
lykhue
View
224
Download
5
Embed Size (px)
Citation preview
xxx ISBN: 978-1-61782-393-0
SPE/IADC Drilling Conference and Exhibition 2011
Amsterdam, The Netherlands 1-3 March 2011
Volume 1 of 2
Printed from e-media with permission by:
Curran Associates, Inc. 57 Morehouse Lane
Red Hook, NY 12571
Some format issues inherent in the e-media version may also appear in this print version. Copyright© (2011) by the Society of Petroleum Engineers All rights reserved. Printed by Curran Associates, Inc. (2011) For permission requests, please contact the Society of Petroleum Engineers at the address below. Society of Petroleum Engineers P. O. Box 833836 Richardson, Texas 75083-3836 Phone: (800) 456-6863 Fax: (972) 952-9435 [email protected] Additional copies of this publication are available from: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 USA Phone: 845-758-0400 Fax: 845-758-2634 Email: [email protected] Web: www.proceedings.com
TABLE OF CONTENTS
VOLUME 1
SPE/IADC 138001 High Performance Wellbore Departure and Drilling System for Accessing New Target ..................................................................................................................................................................................... 1
Charles Dewey, Shantanu Swadi, Shelton Alsup, Praful Desai
SPE/IADC 138852 Novel Solution to Cement Strength Retrogression ........................................................................... 10Sarah Gibson
SPE/IADC 138922 Rigorous Identification of Unplanned and Invisible Lost Time for Value Added Propositions Aimed at Performance Enhancement .......................................................................................................... 17
Hermann Spoerker, Gerhard Thonhauser, Eric Maidla
SPE/IADC 138960 Reducing Safety Incidents by Lifting Single Joints of Drill Pipe with a New Design of Elevator ............................................................................................................................................................................ 26
Alan Law, Jon Turnbull, Thomas Redlinger, Melissa Frilot, Gary Brady
SPE/IADC 139122 Wellbore Positioning Practices and Challenges in Africa ................................................................ 36Gary Skinner
SPE/IADC 139161 Psychological Effect on HSE Behaviour - New Initiative from a Drilling Team ............................ 44Mohannad Al-Mehailani, Khaled Al-Hindi, Ashis Gohain, Saleh Muqeem, Safi Akhtar, Abdulwahab Al-Rakdan
SPE/IADC 139403 Continuous Motion Rig. A Detailed Study of a 750 Ton Capacity, 3600 m/hr Trip Speed Rig .............................................................................................................................................................................. 52
Mads Grinrod, Helge Krohn
SPE/IADC 139408 Approaching the Technical Limit: Mature Basin Benefits from Influx of Advanced Drilling Rigs/Tool Technology ............................................................................................................................................ 62
Hugo Marquez, Marcelo Crovetto
SPE/IADC 139410 A Historical Review of Drill Pipe Capabilities and the Triggers for Change ................................. 74Thomas Redlinger, John McCormick
SPE/IADC 139493 Emergency Severance of Casing for Deepwater Operations: A Design Build and Test Programme of Novel Technologies............................................................................................................................. 86
N. Richmond, N.J. Bamford, A.S. Bamford
SPE/IADC 139511 Drill Pipe Cutting At Ultra High Pressure: A Proven Capability For Stuck Pipe Hazards............................................................................................................................................................................... 102
John “J.W.” Segura
SPE/IADC 139534 Preliminary Test Results of Nano-based Drilling Fluids for Oil and Gas Field Application ......................................................................................................................................................................... 112
Md. Amanullah, Mohammad K. Al-Arfaj, Ziad Al-Abdullatif
SPE/IADC 139623 Drilling Fluid Design Enlarges the Hydraulic Operating Windows of Managed Pressure Drilling Operations ............................................................................................................................................ 121
Doug Oakley, Lee Conn
SPE/IADC 139628 Challenging Multilateral and Completion Design for a Deepwater Well in Italy: Decision Support through Risk Analysis ......................................................................................................................... 128
C. Repetto, C. Sanasi, S. Di Vincenzo, C. Cordeddu, G. Ricci Maccarini, M. Tufo, J. Michelez, N. Rossi
SPE/IADC 139683 New Technology, Which Enables Closed, Looped Drilling (MPD) from Mobil Offshore Drilling Units (MODU)...................................................................................................................................... 139
Jan Atle Andresen, Tom Askeland
SPE/IADC 139708 Wellbore Stability Modeling and Real-Time Surveillance for Deepwater Drilling to Weak Bedding Planes and Depleted Reservoirs.............................................................................................................. 145
James Lang, Shuling Li, Jincai Zhang
SPE/IADC 139762 Intergranular Cracking of Oil Field Tubular Components Resulting from the Tempering Process ............................................................................................................................................................ 163
Srinivasa Koneti, Samit Gokhale, Thomas Wadsworth
SPE/IADC 139766 Casing Burst Stresses in Particulate-Filled Annuli: Where’s the Cement?.................................. 176Issa A. Kalil, Albert R. McSpadden
SPE/IADC 139769 Coating Optimized for Abrasion and Fatigue Resistance for Use in Extreme Well Geometries.......................................................................................................................................................................... 195
John McCormick, Joe Le, Chad Evans
SPE/IADC 139773 Overcoming Challenges for Drilling High-Dogleg-Severity Curves.............................................. 204S. Janwadkar, O. Hummes, A. Peter, M. Freeman, S. Privott, D. Greene, C. Loesel
SPE/IADC 139785 Fatigue-Based Tubular Connection Performance for a CSS Operation....................................... 222S-Y. Hsu, K.H. Searles, A.W. Aylor
SPE/IADC 139817 One Sack Rapid Mix and Pump Solution to Severe Lost Circulation........................................... 232Dennis K. Clapper, Joseph J. Szabo, Steven Spence, Mike Otto, Brian Creelman, Tom G. Lewis Jr., Gary McGuffey
SPE/IADC 139824 Lateral Buckling – The Key to Lockup ........................................................................................... 244Robert F. Mitchell, Tore Weltzin
SPE/IADC 139826 Breakout Torque: Hypothesis, Investigation, and Evaluation....................................................... 274J.N. Brock, A. Muradov, S.S. Youngson, C. Brooks, M.L. Payne
SPE/IADC 139829 Casing Design with Flowing Fluids .................................................................................................. 296Robert F. Mitchell
SPE/IADC 139830 Axial Excitation as a Means of Stick Slip Mitigation - Small Scale Rig Testing and Full Scale Field Testing ..................................................................................................................................................... 304
Ian Forster
SPE/IADC 139839 Mitigating Stick-Slip In Deep Drilling Based On Optimization Of PDC Bit Design ................... 332G. Pelfrene, H. Sellami, L. Gerbaud
SPE/IADC 139841 A Systematic Approach to Performance Drilling in Hard Rock Environments .......................... 344Mark Dykstra, Barry Schneider, Jose Mota
SPE/IADC 139842 Drilling Performance Improvement in the Haynesville Shale Play ............................................... 360Rich Billa, Jose Mota, Barry Schneider, Mike Weissman
SPE/IADC 139845 Can Safety Improvement Increase Drilling Efficiency?................................................................. 366David Pavel, Said Boutalbi, Brian Grayson
SPE/IADC 139848 Integrated Drilling Optimization and Downhole Drilling Dynamics Enables PDC Bits to Drill in the Colorado Region of the San Juan Unconventional Gas Basin ........................................................ 374
Tony Pink, Lisa Harrell, Danny Perez, John Carrico, Paul Mackinnon
SPE/IADC 139849 Real-Time Optimization of Drilling Parameters by Autonomous Empirical Methods .............................................................................................................................................................................. 386
W.L. Koederitz, W.E. Johnson
SPE/IADC 139855 The First Successful Short-Radius Re-Entry Well in Deep Gas Drilling in Saudi Arabia ................................................................................................................................................................................. 402
Shaker Al-Khamees, Hope Okwa, Jaywant Verma, Sukesh Ganda
SPE/IADC 139870 Operator’s Recommendation for a Uniform Dull Grading System for Fixed Cutter Hole Enlargement Tools.................................................................................................................................................... 412
L. Ulvedal, J.D. Enterline, D. Scott, S. Radford, J. Clinkscales, L. Shale, M. Croxton
SPE/IADC 139888 Condition Based Maintenance: A New Early Leak Detection System for Mud Pumps ................................................................................................................................................................................. 420
Age Kyllingstad, Pal Jacob Nessjoen
SPE/IADC 139893 Underreamer Dynamics .................................................................................................................... 433B. Meyer-Heye, H. Reckmann, G-P. Ostermeyer
SPE/IADC 139897 Increased Rate of Penetration Through Automation ..................................................................... 442J. Dunlop, R. Isangulov, W.D. Aldred, H. Arismendi Sanchez, J.L. Sanchez Flores, J. Alarcon Herdoiza, J. Belaskie, J.C. Luppens
SPE/IADC 139909 Remotely Operated Top-Drive Casing-Running System Combined with New Cement Head Enables Major Oil Company to Improve Zonal Isolation and Cement Bonding with Enhanced Safety and Efficiency in Caspian Sea ............................................................................................................. 453
Tracy Cummins, Egill Abrahamsen, Ian Killoh
SPE/IADC 139910 Rebuilding a Tool Joint: Best Practices to Avoid Failure .............................................................. 458Grant Pettit, Samit Gokhale
SPE/IADC 139922 The Next Generation Top Drive and Lessons Learned from the TDX-1250 ................................ 466Jay Pickett, Justin Saski, Robert Luher, Andre Cantrell, Brett Wallihan
SPE/IADC 139925 Controlling Well Path Trajectory with Rate of Penetration Modulation ..................................... 474S.R. Farley, C.A. Maranuk, B.J. Hronek, C. Jasper
SPE/IADC 139926 Fluid Hammer Drives Down Well Costs.......................................................................................... 484Robert Staysko, Brenda Francis, Brad Cote
SPE/IADC 139929 First Application of Heat-Activated, Rigid Rapid-Fluid System in Deepwater Environment in Mexico Helps to Cure Severe Loss of Circulation: A Case History ................................................... 490
Jorge Castro, Luis Solis, Javier Urdaneta, Victor Arreola
SPE/IADC 139932 Drilling Highly Depleted Formations with Engineered Particle Non-Aqueous Fluids (EP-NAF): South China Sea.................................................................................................................................. 497
Michael R. Niznik, Adela Lawrence, Sabine C. Zeilinger
SPE/IADC 139939 Collapse Prediction Methodology for the Solid Expandable Tubulars ......................................... 506J. Agata, E. Tsuru, M. Sawamura, H. Asahi, H. Tsugihara
SPE/IADC 139943 Automation of the Drilling Fluid Mixing Process, Field Experiences and Development from North Sea Operations........................................................................................................................ 513
Ove Kvame, Bjarne Blom-Jensen, Yngve Bastesen, Jan Erik Sandvik
SPE/IADC 139944 On Interaction Buckling in Platform Conductors .......................................................................... 523A.J. Adams
SPE/IADC 139953 Remote Communication Techniques from Surface to Downhole Tools........................................ 545P. Joseph, L.E. Mendez, D. Dolyniuk
SPE/IADC 139954 Exploration Drilling Campaigns - Optimized Drilling Performance Using Drilling Consortium Management.................................................................................................................................................. 550
Bjorn Thore Ribesen, Kjell Arild Horvei, Tove Magnussen, Arild Saasen, Tormod Veiberg
SPE/IADC 139956 Field Experience with an Active Stick-Slip Prevention System ..................................................... 562Pal Jacob Nessjoen, Age Kyllingstad, Piero D’Ambrosio, Isaac S. Fonseca, Alexis Garcia, Bruno Levy
SPE/IADC 139989 Conventionally Undrillable Open Fractured Reservoir, Drilled Using Managed Pressure Drilling Technology ........................................................................................................................................... 572
I. Hamoudi, K. Kartobi, H. Qutob, M. Arnone, F. Torres, N. Barakat
SPE/IADC 139996 Development of an Innovative Model-Based Stick/Slip Control System....................................... 585Jens Rudat, Dmitriy Dashevskiy
SPE/IADC 140010 Passive Inflow Control Devices and Swellable Packers Control Water Production in Fractured Carbonate Reservoir: A Comparison with Slotted Liner Completions .................................................. 597
Kim Sam Youl, Widayat Suhana, Rhandy Regulacion, Thomas Jorgensen
SPE/IADC 140011 Analytical and Experimental Backward Whirl Simulations for Rotary Steerable Bottom Hole Assemblies .................................................................................................................................................... 605
D.R. Stroud, L.A. Lines, D.J. Minett-Smith
SPE/IADC 140024 Achievements and Lessons Learned from a 4-Year Experience of Extended Reach Drilling in Offshore Dagang Oilfield, Bohai Basin, China ............................................................................................. 624
Rongchao Cheng, Haige Wang, Lingzhan Zou, Mingxin Zhou, Dong Sha, Chuandu Liu
SPE/IADC 140028 “Understanding XLOTs”.................................................................................................................. 638Alexander Heger, Hermann Spoerker
SPE/IADC 140044 Results of July 15, 2010 IADC Stick-Slip Mitigation Workshop ................................................... 649K.A. Womer, D.R. Torkay, G. Villanueva, T. Geehan, J. Brakel, D. Pirovolou, D. Reid, M. Killalea
SPE/IADC 140045 Real Time Pore Pressure Prediction Using LWD And Borehole Seismic Data Assists In Mitigating Risk On An Appraisal Well Offshore Malaysia .......................................................................... 661
Aqil Ahmed, Leo Anis, Scott Fey, Riasat Hussain, Helmi Rahim, Tan Boon Hua, Azlan Mohaideen
SPE/IADC 140051 Challenges Of Drilling In The Chilean Altiplano ........................................................................... 671Roberto De Angelis, Matthew Holdeman, Gary Pidcock, Warren Levy, Horacio Figueroa, Raul Lyon
VOLUME 2
SPE/IADC 140069 Exploration of the Interaction Between Drill Bit Gauge Profile and Point-The-Bit Rotary Steerable Systems.................................................................................................................................................. 679
L.A. Lines, M.L. Larronde, D.R. Stroud
SPE/IADC 140070 Maximizing Core Recovery in Lower Tertiary Through Drilling Optimization Service and Intelligent Core Bit Design ........................................................................................................................... 698
Peter Guarisco, James Meyer, Rohit Mathur, Ian Thomson, Jeremy Robichaux, Clifford Young, Edgar Luna
SPE/IADC 140073 Advanced Reservoir Navigation System and Drilling Technology Maximizes Productivity and Drilling Performance in the Granite Wash – US Midcontinent ....................................................... 706
S. Janwadkar, M. Thomas, S. Privott, R. Tehan, L. Carlson, W. Spear, A. Setiadarma
SPE/IADC 140086 Thermally Compensated Leak Detection Results in Significant Blow Out Preventer (BOP) Testing Efficiencies............................................................................................................................... 719
C.M. Franklin, T.L. Sargent, C.R. Brown, G.W. Owen, S. Griffith, J.W. Osmond, R. Cully
SPE/IADC 140113 Kick Tolerance Misconceptions and Consequences to Well Design .............................................. 730Helio Santos, Erdem Catak, Sandeep Valluri
SPE/IADC 140114 Interoperability: An Enabler for Drilling Automation and a Driver for Innovation .................. 740Andreas Sadlier, Moray Laing
SPE/IADC 140117 Cutting the Cost of HP/HT Cleanups: Novel High Density Cleanup Package Enables Brine Reclamation and Reduces Costs .............................................................................................................. 752
Michael Richmond, Alistair Hutton, Marcus Davidson, Siv Howard, Bob Frost, Stuart Leon, Marcel Jaspars
SPE/IADC 140133 Surface Hole Casing While Drilling — A Review of Five Years Experience in Gabon, West Africa ........................................................................................................................................................... 758
B. Askew, A. Phillips, J.H. Wingate
SPE/IADC 140144 Dynamic Aspects Governing Cement Plug Placement in Deepwater Wells ................................. 768P.E. Aranha, C.R. Miranda, J.V.M. Magalhaes, G. Campos, A.L. Martins, A. Braghini, M.F. Naccache
SPE/IADC 140145 Well Construction Hydraulics in Challenging Environments ....................................................... 782A.L. Martins, A.F.L. Aragao, P.E. Aranha, M.G. Folsta, A.T.A. Waldmann
SPE/IADC 140159 Analysis of Tubular Failures in Riserless Environments ............................................................... 794Robello Samuel, Rishi Adari, John Gradishar, A. Willie Iyoho
SPE/IADC 140172 Anatomy of the “Best In Class Well”: How Operators Have Organised the Benchmarking of their Well Construction and Abandonment Performance ............................................................... 805
Peter Rushmore
SPE/IADC 140181 Case Histories of Recent Field Results for Advancement in Milling of Cemented Tubulars ............................................................................................................................................................................. 824
Mohammed A. Haq, Jerry Fisher, Tom Bailey
SPE/IADC 140183 A Comparison of Collision Avoidance Calculations ....................................................................... 830Shola Okewunmi, Andrew Brooks
SPE/IADC 140192 Improving the Quality of Ellipse of Uncertainty Calculations in Gyro Surveys to Reduce the Risk of Hazardous Events like Blowouts or Missing Potential Production through Incorrect Wellbore Placement .......................................................................................................................................... 836
Roger Ekseth, John Weston, Adrian Ledroz, Barry Smart, Astrid Ekseth
SPE/IADC 140205 Quality Assurance of Wellbore Stability Analyses ......................................................................... 851Bernt S. Aadnoy
SPE/IADC 140211 Which Material is Less Resistant to Buckling: Steel, Aluminum or Titanium Drill Pipe? ................................................................................................................................................................................... 862
S. Bensmina, S. Menand, H. Sellami
SPE/IADC 140224 Documentation of Risk and Cost-reducing Potential by Utilizing an Automatic Supervision and Decision Support System During Drilling a Challenging HPHT Well .............................................. 873
Rolv Rommetveit, Sven Inge Odegard, Christine Nordstrand, Knut S. Bjorkevoll, Mikkel Fjeldheim
SPE/IADC 140228 Case History: Lessons Learned From Retrieval of Coiled Tubing Stuck by Massive Hydrate Plug When Well Testing in an Ultra-Deep Water Gas Well in Mexico.......................................................... 883
Victor Vallejo Arrieta, Aciel Olivares Torralba, Pablo Crespo Hernandez, Eduardo Rafael Roman Garcia, Claudio Tigre Maia, Michael Guajardo
SPE/IADC 140231 FMECA and Commissioning - Guidelines to Effectively Deliver Technology and Systems for Successful Drilling Automation.................................................................................................................... 891
John de Wardt, Tom Moore, Andy McKenzie
SPE/IADC 140241 Application of Tandem Rotary Steerable-Positive Displacement Motor Bottom Hole Assembly in Drilling Horizontal Wells: Case Study of Three Eastern Siberia Wells ......................................... 913
Zimuzor Okafor, Andrew Buchan, Dmitry Diyanov, Sheldon Rawlins, Grigoriy Zhadan, Yuriy Nikitenko
SPE/IADC 140242 Predicting Salt Leaching During Drilling and Cementing Operations ......................................... 936M.G. Folsta, A.L. Martins, R.F. Lomba, W.F. Cardoso Jr., C.A. Simao, I.A. Sidi, C.E. Dannenhauer
SPE/IADC 140244 Pre-perforated Liner Design and Coiled-Tubing Acidizing of Maximum-Reservoir-Contact (MRC) Wells Offshore Abu Dhabi ................................................................................................... 946
John Jorden, Alfred Jackson, Stu Keller, Chris Shuchart, J. Oliverio Alvarez, Scott Quigley
SPE/IADC 140245 Turbodrill BHA Solves Build Section Challenges, Anadarko Basin ............................................. 956Craig Staley, Greg Bruton, Mark Natanael, Jason Kelley, Ross Milne
SPE/IADC 140249 Acquiring Formation Pressure Measurements in Challenging Borehole Conditions .................. 965M. Piber, S.C. Ash, J. Hemsing, R.S. Kuchinski
SPE/IADC 140255 Development of an Automated System for the Rapid Detection of Drilling Anomalies using Standpipe and Discharge Pressure ...................................................................................................... 974
Don Reitsma
SPE/IADC 140260 The Successful Evolution of an LWD Rotary Steerable System for Air Drilling ......................... 983Chris Hartley, Denis Weisbeck, Scott Robert, Mark Smith
SPE/IADC 140261 Liner Drilling Technology as a Mitigation to Wellbore Ballooning - A Successful Case Study in the Gulf of Mexico Shelf............................................................................................................................ 990
Steven M. Rosenberg, Deepak M. Gala
SPE/IADC 140262 Application of a New Method for Predicting Down Hole Loading of Tubulars During Expansion ............................................................................................................................................................ 1000
Merle E. Evans, John R. Setterberg
SPE/IADC 140265 Extended Reach Drilling - Offshore California. Extending Capabilities and Improving Performance .................................................................................................................................................. 1025
Neil R. Armstrong, Andrew M. Evans
SPE/IADC 140266 Deepwater DP Drilling Rigs on Shallow Water Wells, Can it Work?......................................... 1038Raj Kadiyala, Alan Whooley
SPE/IADC 140267 Integrated Downhole Isolation Valve and Managed Pressure Drilling To Facilitate Development of Sour Fractured-Limestone Gas Reservoir in East Java, Indonesia ................................................. 1050
Ganesha Rinku Darmawan, Nathaniel Buntu Sangka, Surjanto Djoko Susilo, Steve Nas, Julmar Shaun S. Toralde, Andi Eka Prasetia
SPE/IADC 140274 Merging Multilateral and Casing Exit Technologies to Increase Wellbore Junction Reliability by Reducing Rig and Openhole Exposure Times ....................................................................................... 1059
Christopher Guidry, Charles Pleasants, Joseph Sheehan
SPE/IADC 140277 New Technologies to Enhance Performance of Section Milling Operations that Reduces Rig Time for P&A Campaign in Norway ....................................................................................................... 1076
Eamonn Scanlon, Garry Garfield, Siri Brobak
SPE/IADC 140281 A New Player Entry to the Deepwater Market ............................................................................. 1086Tim Ouwerkerk
SPE/IADC 140289 ECD Management and Pore Pressure Determination with MPD Improves Efficiency in GOM Well .................................................................................................................................................. 1097
P.D. Fredericks, L. Smith, K.J. Moreau
SPE/IADC 140297 Mist Drilling in Low-Pressured, Highly Fractured Carbonates Improves Well Test Results and Fracture Identification from Image Logs.................................................................................................. 1113
Norlizah Mohd Nor, Maria Balzarini, Mustafa Siddiqui
SPE/IADC 140298 Automated Real-time Drilling Hydraulics Monitoring ................................................................ 1118P. Zoellner, Gerhard Thonhauser, M. Lueftenegger, Hermann Spoerker
SPE/IADC 140304 A Cost-Effective Alternative Method of Deploying Perforating Devices in High-Angle Wells....................................................................................................................................................................... 1128
Ryan Hord, Thad Scott, Fred Weeks, Marcel Budde
SPE/IADC 140305 An Aggressive Approach to Reducing Failure-Driven Non-Productive Time in Onshore Drilling Operations: Expanding the Quality Program.................................................................................. 1140
Jeff Everage, Shawn Altizer, Juan Veloz, Fred Kellow
SPE/IADC 140317 Extension of Gauge Length to Reduce Vibrations and Improve Drilling Performance ..................................................................................................................................................................... 1149
Gregory F. Smyth, Andrew M. Evans, Jonathan Babb, Neil Bolivar
SPE/IADC 140318 Hibernia Well Overcomes Challenges to Further Extend Worldwide Extended Reach Drilling (ERD) Envelope...................................................................................................................................... 1158
Miriam Woodfine, Neil Bolivar, Sarah Trend, Steinar Ottesen
SPE/IADC 140320 Delivering Performance in Shale Gas Plays: Innovative Technology Solutions......................... 1169Franklin Baez, Steve Barton
SPE/IADC 140324 The Continuous Measurement and Recording of Drilling Fluid Density and Viscosity............................................................................................................................................................................ 1185
A. Miller, R.C. Minton, R. Colquhoun, M. Ketchion
SPE/IADC 140326 Effective BHA Design and Vibration Modeling for Improving the Quality of Sonic Measurements .................................................................................................................................................................. 1189
Crispin Chatar, Matthew Blyth
SPE/IADC 140327 Hydrocarbon Reservoirs Where Proactive Geosteering is Most Likely to Succeed................... 1207Douglas Seifert, Roland Chemali, Michael Bittar, Gary Althoff, Amr Lotfy
SPE/IADC 140331 Case History of Innovative Plug and Abandonment Equipment and Processes for Enhanced Safety and Significant Cost Savings ............................................................................................................. 1217
Delaney Olstad, John McCormick
SPE/IADC 140332 Understanding and Managing Bottom Hole Circulating Temperature Behavior in Horizontal HT Wells - A Case Study Based on Haynesville Horizontal Wells ........................................................... 1224
Keith Trichel, John Fabian
SPE/IADC 140333 How to Accelerate Drilling Learning Curves ................................................................................ 1244Eric Van Oort, James Griffith, Barry Schneider
SPE/IADC 140337 New Sampling and Testing-While-Drilling Technology, A Safe, Cost-Effective Alternative........................................................................................................................................................................ 1254
Mark Proett, Sami Eyuboglu, Jim Wilson, Tommy Solbakk
SPE/IADC 140347 Testing the Combination of High Frequency Surface and Downhole Drilling Mechanics and Dynamics Data under a Variety of Drilling Conditions ..................................................................... 1268
Bill Lesso, Maja Ignova, Firas Zeineddine, James Burks, Brent Welch
SPE/IADC 140353 Cutting Carbonates — New Technology Delivers Step Changes in Bit Performance ............... 1281R.W. Weeden, S. Williams, F. Lugo, P. Gaduan
SPE/IADC 140357 Natural Gas as a Fuel in Drilling Operations-Analysis, Testing and Implementation ................................................................................................................................................................ 1298
David G. Hill, Jeff Johnson, John Bell, Nathan Mayer, Hugh Giberson, Ryan Hessler, Will Matthews
SPE/IADC 140365 Low Force Shear Rams: The Future is More................................................................................ 1314Frank Springett, Eric Ensley, Darrin Yenzer, Scott Weaver
SPE/IADC 140375 Enabling Technology Optimizes Dynamic Mud Weight Management and Reduces Well Cost Associated with Drilling Operations ............................................................................................................. 1323
Thomas L. Barbato, A. Serkan Cenberlitas, Deepak M. Gala
SPE/IADC 140391 Managing New Technology Introduction to Provide Maximum Benefit .................................... 1339Andy Hatch, Nicol Shepherd, Peter Diepeveen, Grant Affleck
Author Index