View
225
Download
0
Tags:
Embed Size (px)
DESCRIPTION
spega e.control product catalogue 2012
Citation preview
e.control™Room automation
Products 2012/2013
Symbols:
Power supply 230V AC (mains voltage)
Power supply 24V DC
Power supply 24V AC/DC
e.control products 2012/2013(version 3/2012)
© 2012 byspegaspelsberg gebäudeautomation gmbhzechenstr. 7047443 moersgermany
Demo software available*
Plug-in available*
Software application available*
Technical data sheet available*
e.control™
spega, e.homeTM, e.controlTM und FastConTM are trademarks for Spelsberg Gebäudeautomation GmbH.LON, LNS und LonWorks are registered trademarks for Echelon Corporation in the USA and other countries. LonMark and the LonMark Logoare managed, granted, and used by LonMark International under a license granted by Echelon Corporation.
Subject to technical or design change. Please take note of technical data sheets.
Image sources: p.7 Frankonia, Klocke Verlag, S. Gragnato, G. Pilger, Arnoldius, Palais Quartier
Ethernet (LON/IP, BACnet/IP, etc.)
LON transceiver FTT10
* on e.control CD or online at www.spega.com
41
e.controlTM product catalogue
ALEX Commissioning software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90IPLONGATE OPC data server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91LPA protocol analyser and LSD system diagnostics . . . . . . . . . . . . . . . . . . . . . . . . 91so
ftwar
ein
fra Routers and terminators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Power supplies and interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Touch panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Web server and IP telephone server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Universal Room operation panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 nova Room operation panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 nova Push button sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 nova Room climate controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 nova EnOcean sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Type 55 Room climate controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Type 55 EnOcean sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
cont
rol p
anel
s
Switch actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 DALI Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Universal dimmers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Sunblind actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 SMI Sunblind actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Digital inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Digital outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Analogue inputs/outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 MP-Bus Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
r ser
ies
m s
erie
s M series Distribution boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 M series Lighting modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 M series Sunblind modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 M series Analogue and digital input/output modules . . . . . . . . . . . . . . . . . . . . . . . 68
fast
con FastCon Switch actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
FastCon Sunblind actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Fire and smoke damper modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Compact weather sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Weather station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Slat tracking controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84w
eath
erse
rver
s BACnet server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 OPC-XML server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Application controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
EnOcean Window handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 EnOcean Radio receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Multisensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Presence detectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
sens
ors
product catalogue
42 www.spega.com
Specifi cation Order No.Figure Technical data
Touch panels
dialog T5LON Touch panel 5.7“
Comfortable display and control panel for air conditioning, lighting, sunblinds, window control etc.
Front made of anodised aluminium
Supports static and dynamic LON network variables (max. 1,000) plus confi guration properties
Supports local or remote alarming, scheduling and local trend logging
Integrated VNC server for remote destop access via IP network
Confi gurable via LNS plug-in in WYSIWYG design
341 511 A940 005
341 512 A940 012
341 515 A940 015
Model aluminium anodisedMounting frame
Network:Port 1 10/100 Base-T (Ethernet)Port 2 TP/FT-10 (LON)
Power supply:24V AC/DC, max. 330mA (8 W)
Equipment:- Display 320 x 240 pixel, 256 colors- Backlight- Touch-sensitive display- Integrated RNI remote interface
Metrics/Mounting:(HxWxD) 164 x 210 x 63mmMounting frame available separately
Model aluminium anodisedMounting frame
Network:Port 1+2 10/100 Base-T (Ethernet)Port 3 TP/FT-10 (LON)
Power supply:24V DC, max. 550mA (13 W)or 90 - 230V AC
Equipment:- Display 800 x 600 pixel, 65,535 colors- Dimmable backlight- Touch-sensitive display- 200 MB internal fl ash memory- Integrated RNI remote interface
Metrics/Mounting:(HxWxD) 269 x 329 x 65mmMounting frame available separately
Model aluminium anodisedMounting frame
Network:Port 1+2 10/100 Base-T (Ethernet)Port 3 TP/FT-10 (LON)
Power supply:24V DC, max. 660mA (16 W)or 90 - 230V AC
Equipment:- Display 1024 x 768 pixel, 65,535 colors- Dimmable backlight- Touch-sensitive display- 200 MB internal fl ash memory- Integrated RNI remote interface
Metrics/Mounting:(HxWxD) 318 x 394 x 65mmMounting frame available separately
dialog T12LON Touch panel 12“
Comfortable display and control panel for air conditioning, lighting, sunblinds, window control etc.
Front made of anodised aluminium
Supports static and dynamic LON network variables (max. 1,000) plus confi guration properties
Supports local or remote alarming, scheduling and local trend logging
Integrated VNC server for remote destop access via IP network
Confi gurable via LNS plug-in in WYSIWYG design
dialog T15LON Touch panel 15“
Comfortable display and control panel for air conditioning, lighting, sunblinds, window control etc.
Front made of anodised aluminium
Supports static and dynamic LON network variables (max. 1,000) plus confi guration properties
Supports local or remote alarming, scheduling and local trend logging
Integrated VNC server for remote destop access via IP network
Confi gurable via LNS plug-in in WYSIWYG design
e.controlTM product catalogueRoom operation
43
Specification Order No.Figure Technical data
Web and IP Phone server
dialog WebInternet web server
Server for controlling all room auto-mation functions via standard web browser or IP phones (optional)
Static interface for a maximum of 150 rooms, multiple servers can be clustered for unlimited numbers of rooms with shared configuration
Separated building management IP network and user IP network via 2 Ethernet ports
User administration and access rights management via web inter-face
User-independent licensing per room, configurable via LNS plug-in
Server incl. Web licenses for 15 rooms
Network:Port 1 10/100 Base-T (LON/IP)Port 2 10/100 Base T (TCP/IP LAN)
Power supply:10-32V DC, max. 7.5 W
Metrics/Mounting:(HxWxD) 27 x 165 x 110mmDIN rail mounting or 19“ rack mounting (1U, see p. 89)
443 150 C
dialog Web Virtual web operation panel
Licenses an additional virtual web-based room panel on the internet web server dialog Web
Each room requires one license
Number of users per virtual room panel is unlimited
Web license (per room)
Activation:Via license file upload from the admi-nistration webpage. Licenses can be upgraded at any time.
093 101
093 141dialog Web Virtual IP phone operation panel
Activates the XML interface for IP phones for a licensed virtual room panel
Supports the following XML-enabled IP phones: - Siemens Open Stage 40, 60, 80 - Cisco Unified IP Phone 7900
Each virtual room panel with IP phone interface requires a license
Number of phones per virtual room panel is unlimited
Add-on license (per room)
Activation:Via license file upload from the admi-nistration webpage. Licenses can be upgraded at any time.
44 www.spega.com
Specification Order No.Figure Technical data
341 708 WModel white
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 185mA
Equipment:- TFT display 320x240 pixels, 262k col.- Capacitive glass touch surface
Metrics/Mounting:(HxWxD) 197 x 82 x 52mmin cavity wall or flush mounting sockets
Available applications:SC341708CM f. external temp. controllerSC341708EC2 f. radiator, chilled ceiling, fan coil or VAV
tactio L whiteLON Touch room operation panel
Room operation panel with tem-perature sensor, 3.5" TFT graphic display and capacitive glass surface for intuitive control of all climate functions
8 additional capacitive touch sensors for control of lights, blinds, windows or scenes
Anodised aluminium clip with touch sensor for manual logon
Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)
341 501 WModel aluminium / white
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 80mA
Equipment:- Display 4x16 characters, backlit- Control via push and turn knob- Realtime clock, battery backed- Buzzer, 3 LEDs (red, yellow, green)
Metrics/Mounting:(HxWxD) 125 x 125 x 40mmincl. box for cavity wall or flush mounting
Available applications:SC341501CM f. external temp. controllerSC341501EC2 f. radiator, chilled ceiling, fan coil or VAV
Universal room operation panels
341 701 WModel white
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 185mA
Equipment:- TFT display 320x240 pixels, 262k col.- Capacitive glass touch surface
Metrics/Mounting:(HxWxD) 126 x 82 x 52mmin cavity wall or flush mounting sockets
Available applications:SC341708CM f. external temp. controllerSC341708EC2 f. radiator, chilled ceiling, fan coil or VAV
tactio S whiteLON Touch room operation panel
Room operation panel with tem-perature sensor, 3.5" TFT graphic display and capacitive glass surface for intuitive control of all climate functions
Anodised aluminium clip with touch sensor for manual logon
Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)
dialog 1 whiteIntegrated LON room control panel
Comfortable display and control unit for air conditioning, lighting, sunblinds, windows, fans etc.
White backlit display with 4x16 characters, 3 LEDs and buzzer
Front and push and turn knob made of anodised aluminium
Free configurable menu with fa-vourites and scene management
Application according to LonMark and VDI 3813-2 complies with BAC Efficiency Class A (EN 15232)
e.controlTM product catalogueRoom operation
45
Specifi cation Order No.Figure Technical data
Model aluminium / black
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 80mA
Equipment:- Display 4x16 characters, backlit- Control via push and turn knob- Realtime clock, battery backed- Buzzer, 3 LEDs (red, yellow, green)
Metrics/Mounting:(HxWxD) 125 x 125 x 40mmincl. box for cavity wall or fl ush mounting
Available applications:SC341501CM f. external temp. controllerSC341501EC2 f. radiator, chilled ceiling, fan coil or VAV
Model black
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 185mA
Equipment:- TFT display 320x240 pixels, 262k col.- Capacitive glass touch surface
Metrics/Mounting:(HxWxD) 126 x 82 x 52mmin cavity wall or fl ush mounting sockets
Available applications:SC341708CM f. external temp. controllerSC341708EC2 f. radiator, chilled ceiling, fan coil or VAV
Scale of images approx. 1:3
341 708 BModel black
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 185mA
Equipment:- TFT display 320x240 pixels, 262k col.- Capacitive glass touch surface
Metrics/Mounting:(HxWxD) 197 x 82 x 52mmin cavity wall or fl ush mounting sockets
Available applications:SC341708CM f. external temp. controllerSC341708EC2 f. radiator, chilled ceiling, fan coil or VAV
tactio L blackLON Touch room operation panel
Room operation panel with tem-perature sensor, 3.5" TFT graphic display and capacitive glass surface for intuitive control of all climate functions
8 additional capacitive touch sensors for control of lights, blinds, windows or scenes
Anodised aluminium clip with touch sensor for manual logon
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
341 501 A
341 701 Btactio S blackLON Touch room operation panel
Room operation panel with tem-perature sensor, 3.5" TFT graphic display and capacitive glass surface for intuitive control of all climate functions
Anodised aluminium clip with touch sensor for manual logon
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
dialog 1 blackIntegrated LON room control pane
Comfortable display and control unit for air conditioning, lighting, sunblinds, windows, fans etc.
White backlit display with 4x16 characters, 3 LEDs and buzzer
Front and push and turn knob made of anodised aluminium
Free confi gurable menu with fa-vourites and scene management
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
46 www.spega.com
Specifi cation Order No.Figure Technical data
8 buttons, anthracite12 buttons, anthracite 8 buttons, nova frame, black12 buttons, nova frame, black
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 65mA
Metrics/Mounting:(HxWxD) 154 x 83 x 45mmin cavity wall or fl ush mounting sockets
Available applications:SC341508CM f. external temp. controllerSC341508EC2 f. radiator, chilled ceiling, fan coil or VAV
dialog 8 anthraciteLON LCD room operation panel
Comfortable display and control unit for air conditioning, lighting, sunblinds, windows, fans etc.
Backlit display for temperatures, time, date and controller states
Available with 8 or 12 buttons and optional plastic frame for nova design
Integrated temperature sensor
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
341 508 B 8341 508 B12341 608 B 8341 608 B12
8 buttons, aluminium12 buttons, aluminium 8 buttons, nova frame, aluminium12 buttons, nova frame, aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 65mA
Metrics/Mounting:(HxWxD) 154 x 83 x 45mmin cavity wall or fl ush mounting sockets
Available applications:SC341508CM f. external temp. controllerSC341508EC2 f. radiator, chilled ceiling, fan coil or VAV
dialog 8 aluminiumLON LCD room operation panel
Comfortable display and control unit for air conditioning, lighting, sunblinds, windows, fans etc.
Backlit display for temperatures, time, date and controller states
Available with 8 or 12 buttons and optional plastic frame for nova design
Integrated temperature sensor
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
341 508 A 8341 508 A12341 608 A 8341 608 A12
8 buttons, pure white12 buttons, pure white 8 buttons, nova frame, pure white12 buttons, nova frame, pure white
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 65mA
Metrics/Mounting:(HxWxD) 154 x 83 x 45mmin cavity wall or fl ush mounting sockets
Available applications:SC341508CM f. external temp. controllerSC341508EC2 f. radiator, chilled ceiling, fan coil or VAV
dialog 8 pure whiteLON LCD room operation panel
Comfortable display and control unit for air conditioning, lighting, sunblinds, windows, fans etc.
Backlit display for temperatures, time, date and controller states
Available with 8 or 12 buttons and optional plastic frame for nova design
Integrated temperature sensor
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
341 508 W 8341 508 W12341 608 W 8341 608 W12
nova Room control panels
e.controlTM product catalogueRoom operation
47
Specifi cation Order No.Figure Technical data
8 buttons, aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 45mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available applications:SC231618CM f. external temp. controllerSC231618EC2 f. radiator, chilled ceiling, fan coil or VAV
nova LCD aluminiumLON LCD Room temperature controller with 8 buttons
Room operation panel with temperature sensor, LC display and 8 push buttons for setpoint adjustment, presence, fan stages, lighting, blinds or scenes
Backlit display for temperatures and different controller states
Combinable with nova TSx-e (p. 48) for expansion of up to 16 push buttons, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
8 buttons, black glossy
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 45mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available applications:SC231618CM f. external temp. controllerSC231618EC2 f. radiator, chilled ceiling, fan coil or VAV
nova LCD blackLON LCD Room temperature controller with 8 buttons
Room operation panel with temperature sensor, LC display and 8 push buttons for setpoint adjustment, presence, fan stages, lighting, blinds or scenes
Backlit display for temperatures and different controller states
Combinable with nova TSx-e (p. 48) for expansion of up to 16 push buttons, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
8 buttons, pure white glossy
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 45mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available applications:SC231618CM f. external temp. controllerSC231618EC2 f. radiator, chilled ceiling, fan coil or VAV
231 618 W
231 618 B
231 618 A
nova LCD pure whiteLON LCD Room temperature controller with 8 buttons
Room operation panel with temperature sensor, LC display and 8 push buttons for setpoint adjustment, presence, fan stages, lighting, blinds or scenes
Backlit display for temperatures and different controller states
Combinable with nova TSx-e (p. 48) for expansion of up to 16 push buttons, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)Suitable frames on page 49
Suitable frames on page 49
Suitable frames on page 49
Scale of images approx. 1:3
48 www.spega.com
Specifi cation Order No.Figure Technical data
TS2 with LON interface:pure white glossyblack glossyaluminium
TS2-e Extension module:pure white glossyblack glossyaluminium
Network/Power supply (TS2):TP/FT-10 (FTT10)24V DC, max. 35mA (TS-e: 15mA)
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available application:SC211616EC2 16 x Switch
nova TS2Push button sensor 2-gang
Sensor with 2 push buttons for lighting, blind or scene control
Each button with status LED for status indication
Version TS2 with LON interface and connection port for additional TSx-e with up to 16 switches, application according to LonMark and VDI 3813-2
Version TS2-e as extension module for nova TS or nova LCD, connection via twisted pair cable
Available in 3 colours for nova design, frame not included
211 602 W211 602 B211 602 A
210 602 W210 602 B210 602 A
nova Push button sensors
TS4 with LON interface:pure white glossyblack glossyaluminium
TS4-e Extension module:pure white glossyblack glossyaluminium
Network/Power supply (TS2):TP/FT-10 (FTT10)24V DC, max. 35mA (TS-e: 15mA)
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available application:SC211616EC2 16 x Switch
nova TS4Push button sensor 4-gang
Sensor with 4 push buttons for lighting, blind or scene control
Each button with status LED for status indication
Version TS4 with LON interface and connection port for additional TSx-e with up to 16 switches, application according to LonMark and VDI 3813-2
Version TS4-e as extension module for nova TS or nova LCD, connection via twisted pair cable
Available in 3 colours for nova design, frame not included
211 604 W211 604 B211 604 A
210 604 W210 604 B210 604 A
TS8 with LON interface:pure white glossyblack glossyaluminium
TS8-e Extension module:pure white glossyblack glossyaluminium
Network/Power supply (TS2):TP/FT-10 (FTT10)24V DC, max. 35mA (TS-e: 15mA)
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available application:SC211616EC2 16 x Switch
nova TS8Push button sensor 8-gang
Sensor with 8 push buttons for lighting, blind or scene control
Each button with status LED for status indication
Version TS8 with LON interface and connection port for additional TSx-e with up to 16 switches, application according to LonMark and VDI 3813-2
Version TS8-e as extension module for nova TS or nova LCD, connection via twisted pair cable
Available in 3 colours for nova design, frame not included
211 608 W211 608 B211 608 A
210 608 W210 608 B210 608 A
Suitable frames on page 49
Suitable frames on page 49
Suitable frames on page 49
e.controlTM product catalogueRoom operation
49
Specifi cation Order No.Figure Technical data
nova Room climate controllers and frames
Suitable frames on this page
Suitable frames on this page
231 602 W231 602 B231 602 A231 603 W231 603 B231 603 A231 604 W231 604 B231 604 A231 605 W231 605 B231 605 A
w/o buttons pure white gl. black gl. aluminiumpresence pure white gl. black gl. aluminiumfan speed pure white gl. black gl. aluminiumpresence/fan pure white gl. black gl. aluminium
Network / Power supply:TP/FT-10 (FTT10)24V AC/DC, max. 60mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mm
Available Applications:SC231302CM and SC231302EC2
nova RCMLON Room control panelwith 4 digital inputs
Control panel with temperature sensor, setpoint adjuster and max. 2 buttons incl. LEDs for controller states and fan speed
4 inputs for fl oating contacts, e.g. light, sunblind or hotel card switches (p. 52), window contacts or presence detectors (p. 61)
Available in 3 colours for nova design, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
231 601 W231 601 B231 601 A
Model: pure white glossy black glossy aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 60mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available Applications:SC231301CM f. external temp. controllerSC231301EC2 f. radiator, chilled ceiling fan coil or VAV
nova ROLON Climate controller for publicbuildings with 4 digital inputs
Continuous-action controller with temperature sensor and 2 LEDs for energy mode and heating or cooling activity
4 inputs for fl oating contacts, e.g. light or sunblind switches (p. 52), window contacts or presence detectors (p. 61)
Available in 3 colours for nova design, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
Scale of images approx. 1:3
920 601 W920 601 B920 601 A920 602 W920 602 B920 602 A920 603 W920 603 B920 603 A
R1, single pure white gl. black gl. aluminiumR2, double pure white gl. black gl. aluminiumR3, triple pure white gl. black gl. aluminium
Metrics (HxWxD):single 83 x 83 x 10mmdouble 154 x 83 x 10mmtriple 225 x 83 x 10mm
nova RxPlastic frames for nova design
Combination frames suitable for vertical and horizontal installation
Available in 3 colours and 3 sizes for nova design line
50 www.spega.com
Specifi cation Order No.Figure Technical data
nova Room climate controllers for static heating and cooling
Suitable frames on page 49
231 642 W231 642 B231 642 A231 643 W231 643 B231 643 A
w/o buttons pure white gl. black gl. aluminiumpresence pure white gl. black gl. aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 60mA
Outputs:0-10V, max. 5 mA each
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available Application:SC231342CC2 for radiators, chilled ceilings or VAV
nova RCM-CCLON Room climate controllerwith 6 DI / 2 AO 0-10V
Control panel with temperature sensor, setpoint adjuster and pres-ence button (optional)
2 analogue outputs for actuators and 2 inputs for window contacts or presence detectors (p. 61)
4 inputs for fl oating contacts, e.g. light, sunblind or hotel card switches (p. 52)
Available in 3 colours for nova design, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
231 641 W231 641 B231 641 A
Model: pure white glossy black glossy aluminium
Network:TP/FT-10 (FTT10)
Power supply / outputs:24V AC/DC, max. 60mA0-10V, max. 5 mA each
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available Application:SC231341CC2 for radiators, chilled ceilings or VAV
nova RO-CCLON Climate controller for publicbuildings with 6 DI / 2 AO 0-10V
Same as nova RCM-CC but with-out setpoint adjuster and presence button
Available in 3 colours for nova design, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
Suitable frames on page 49
e.controlTM product catalogueRoom operation
51
Specifi cation Order No.Figure Technical data
nova Room climate controllers for fan coil units
231 634 W231 634 B231 634 A231 635 W231 635 B231 635 A
fan speed pure white gl. black gl. aluminiumpresence/fan pure white gl. black gl. aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 60mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mm, in cavity wall or fl ush mounting sockets
Available Application:SC231334FC2 for fan coil units
nova RCM-FCLON Room climate controllerwith 6 DI and FCB connector
Control panel with temperature sensor, setpoint and fan speed adjuster and presence button (optional)
Integrated control of max. 2 fan coils with clima FCB boxes (see below) via 3-wire cable
6 inputs for fl oating contacts, e.g. light, sunblind or hotel card switches (p. 52), sensors (p. 61)
Available in 3 colours for nova design, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
231 631 W231 631 B231 631 A
Model: pure white glossy black glossy aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 60mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available Application:SC231331FC2 for fan coil units
nova RO-FCLON Climate controller for publicbuildings with 6 DI and FCB conn.
Same as nova RCM-FC but with-out setpoint adjuster or buttons
Available in 3 colours for nova design, frame not included
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
Suitable frames on page 49
Suitable frames on page 49
410 302410 322410 342
Versions:clima FCB-24 2 x 24V AC/DC + fanclima FCB-230 2 x 230V triac + fanclima FCB-10V 2 x 0-10V + fan
Power supply:24V AC/DC: via 3 wire bus 230V AC: separate feed line
Metrics/Mounting:(HxWxD) 85 x 130 x 38mmmounting on fan housing, IP 54
clima FCBFan coil box for controlling a fan coil unit
Junction box for three-stage fan and 2 thermoelectric or continous actuators (0-10V)
2 inputs for fl oating contacts
Connectable to nova RCM-FC or nova RO-FC via 3-wire cable. Max. 2 fan coil boxes can be operated in parallel
Scale of images approx. 1:3
52 www.spega.com
Specifi cation Order No.Figure Technical data
nova Push buttons
910 601 W910 601 B910 601 A
Model: pure white gl. black gl. aluminium
Metrics/Mounting:(HxWxD) 70 x 70 x 40mmin cavity wall or fl ush mounting sockets
nova T1Push button 1-gang
Push button with changeover contact
Can be used with: nova RCM, RCM-CC, RCM-FC or nova RO, RO-CC, RO-FC orlumina T6
Available in 3 colours for nova design, frame not included
910 602 W910 602 B910 602 A
910 604 W910 604 B910 604 A
910 609 W910 609 B910 609 A
nova HCHotel card switch
Hotel card holder with normally open contact
Can be used with: nova RCM, RCM-CC, RCM-FC or nova RO, RO-CC, RO-FC orlumina T6
Available in 3 colours for nova design, frame not included
Suitable frames on page 49
Suitable frames on page 49
Suitable frames on page 49
Suitable frames on page 49
Model: pure white gl. black gl. aluminium
Metrics/Mounting:(HxWxD) 70 x 70 x 40mmin cavity wall or fl ush mounting sockets
nova T2Push button 2-gang
2 push buttons with changeover contacts
Can be used with: nova RCM, RCM-CC, RCM-FC or nova RO, RO-CC, RO-FC orlumina T6
Available in 3 colours for nova design, frame not included
Model: pure white gl. black gl. aluminium
Metrics/Mounting:(HxWxD) 70 x 70 x 40mmin cavity wall or fl ush mounting sockets
nova T4Push rocker 4-gang
2 push rockers with 4 normally open contacts
Can be used with: nova RCM, RCM-CC, RCM-FC or nova RO, RO-CC, RO-FC orlumina T6
Available in 3 colours for nova design, frame not included
e.controlTM product catalogueRoom operation
Model: pure white gl. black gl. aluminium
Metrics/Mounting:(HxWxD) 70 x 70 x 40mmin cavity wall or fl ush mounting sockets
53
Specifi cation Order No.Figure Technical data
nova EnOcean push buttons and sensors
442 610 W442 610 B442 610 A442 611 W442 611 B442 611 A
RC-T: pure white black aluminiumRC-TS: pure white black aluminium
Radio frequency/technology/range:868.3 MHz (EnOcean), battery-free, pho-tovoltaic (>200lx@3h), max. 30m inside
Metrics/mounting:(HxWxD) 71 x 71 x 25mmadhere or screw on all plane surfaces
nova RC-T / nova RC-TSWireless room temperature sensor
Sensor for periodic transmission of room temperature (0...40°C) with additional local setpoint adjuster (only RC-TS)
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Available in 3 colours for nova design, frame not included
nova RC-L1 / RC-J1Wireless push rocker 1-gang
Sensor transmits push events for one group of lights or sunblinds
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Available in 3 colours for nova design, frame not included
RC-L1 ( 0 / I ) pure white gl. black gl. aluminiumRC-J1 (/) pure white gl. black gl. aluminiumRC-N1 neutral pure white gl. black gl. aluminium
Radio frequency/technology/range:868.3 MHz (EnOcean), battery-free, elec-trodynamic, max. 30m inside
Metrics:(HxWxD) 71 x 71 x 15mm
442 601 W442 601 B442 601 A442 605 W442 605 B442 605 A442 603 W442 603 B442 603 A
RC-L2 ( 0 / I ) pure white gl. black gl. aluminiumRC-J2 (/) pure white gl. black gl. aluminiumRC-N2 neutral pure white gl. black gl. aluminium
Radio frequency/technology/range:868.3 MHz (EnOcean), battery-free, elec-trodynamic, max. 30m inside
Metrics:(HxWxD) 71 x 71 x 15mm
442 602 W442 602 B442 602 A442 606 W442 606 B442 606 A442 607 W442 607 B442 607 A
nova RC-L2 / RC-J2Wireless push rocker 2-gang
Sensor transmits push events for two groups of lights or sunblinds
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Available in 3 colours for nova design, frame not included
Suitable frames on page 49
Suitable frames on page 49
Suitable frames on page 49
Suitable frames on page 49
Scale of images approx. 1:3
RC-HC pure white gl. black gl. aluminium
Radio frequency/technology/range:868.3 MHz (EnOcean), battery-free, elec-trodynamic, max. 30m inside
Metrics:(HxWxD) 71 x 71 x 25mm
442 609 W442 609 B442 609 A
nova RC-HCWireless hotel card switch
Sensor transmits insertion and removal of hotel cards
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Available in 3 colours for nova design, frame not included
54 www.spega.com
Specifi cation Order No.Figure Technical data
231 505 W231 505 B231 505 A
Model: pure white anthracite aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 65mA
Metrics/Mounting:(HxWxD) 71 x 71 x 49mmin cavity wall or fl ush mounting sockets
Available applications:SC231505CM f. external temp. controllerSC231505EC2 f. radiator, chilled ceiling fan coil or VAV
clima LCDLON LCD Room control panelwith 4 digital inputs
Control panel with temperature sensor, LCD and 4 buttons for setpoint or fan speed adjustment and presence
4 inputs for fl oating contacts, e.g. light or sunblind switches, window contacts or presence detectors
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
Frame and switches not included
Frame and switches not included
Frame, cover plate and switches not included
231 302 W231 302 B231 302 A231 303 W231 303 B231 303 A231 304 W231 304 B231 304 A231 305 W231 305 B231 305 A
w/o buttons pure white anthracite aluminiumpresence pure white anthracite aluminiumfan speed pure white anthracite aluminiumpresence/fan pure white anthracite aluminium
Network / Power supply:TP/FT-10 (FTT10)24V AC/DC, max. 60mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mm
Available applications:SC231302CM and SC231302EC2 as above
clima RCMLON Room control panelwith 4 digital inputs
Control panel with temperature sensor, setpoint adjuster and max. 2 buttons incl. LEDs for controller states and fan speed
4 inputs for fl oating contacts, e.g. light or sunblind switches, window contacts or presence detectors
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
231 301 W231 301 B231 301 A
Model: pure white anthracite aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 60mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available applications:SC231301CM f. external temp. controllerSC231301EC2 f. radiator, chilled ceiling fan coil or VAV
clima ROLON Climate controller for publicbuildings with 4 digital inputs
Continuous-action controller with temperature sensor and 2 LEDs for energy level and heating or cooling activity
4 inputs for fl oating contacts, e.g. light or sunblind switches, window contacts or presence detectors
Available in 3 colours, suitable for TAE cover plates of- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
Type 55 Room climate controllers
e.controlTM product catalogueRoom operation
55
Specifi cation Order No.Figure Technical data
Type 55 Room climate controllers for static heating and cooling
Frame not included
231 342 W231 342 B231 342 A231 343 W231 343 B231 343 A
w/o buttons pure white anthracite aluminiumpresence pure white anthracite aluminium
Network/Power supply:TP/FT-10 (FTT10)24V AC/DC, max. 60mA
Outputs:0-10V, max. 5 mA each
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available application:SC231342CC2 for radiators, chilled ceilings or VAV
clima RCM-CCLON Room climate controllerwith 6 DI / 2 AO 0-10V
Control panel with temperature sensor, setpoint adjuster and pres-ence button (optional)
2 analogue outputs for actuators and 6 inputs for push buttons, window contacts or occupancy sensors
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
231 341 W231 341 B231 341 A
Model: pure white anthracite aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 60mA
Outputs:0-10V, max. 5 mA each
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available application:SC231341CC2 for radiators, chilled ceilings or VAV
clima RO-CCLON Climate controller for publicbuildings with 6 DI / 2 AO 0-10V
Same as clima RCM-CC but with-out setpoint adjuster or presence button
Available in 3 colours, suitable for TAE cover plates of- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
Frame not included
Frame and cover plate not included
231 544 W231 544 B231 544 A
Model: pure white anthracite aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 65mA
Outputs:0-10V, max. 5 mA each
Metrics/Mounting:(HxWxD) 71 x 71 x 49mmin cavity wall or fl ush mounting sockets
Available application:SC231544CC2 for radiators, chilled ceilings or VAV
clima LCD-CCLON LCD Room climate controllerwith 2 DI / 2 AO 0-10V
Control panel with temperature sensor, LCD and 4 buttons for setpoint or fan speed adjustment and presence
2 analogue outputs for actuators and 2 inputs for fl oating contacts, e.g. windows or occup. sensors
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
Scale of images approx. 1:3
56 www.spega.com
Specifi cation Order No.Figure Technical data
Type 55 Room climate controllers for fan coil units
231 334 W231 334 B231 334 A231 335 W231 335 B231 335 A
fan speed pure white anthracite aluminiumpresence/fan pure white anthracite aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 60mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mm, in cavity wall or fl ush mounting sockets
Available Application:SC231334FC2 for fan coil units
clima RCM-FCLON Room climate controllerwith 6 DI and FCB connector
Control panel with temperature sensor, setpoint and fan speed adjuster and presence button (optional)
Integrated control of max. 2 fan coils with clima FCB boxes (see below) via 3-wire cable
6 inputs for fl oating contacts, e.g. light or sunblind switches
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
231 331 W231 331 B231 331 A
Model: pure white anthracite aluminium
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 60mA
Metrics/Mounting:(HxWxD) 70 x 70 x 49mmin cavity wall or fl ush mounting sockets
Available Application:SC231331FC2 for fan coil units
clima RO-FCLON Climate controller for publicbuildings with 6 DI and FCB conn.
Same as clima RCM-FC but with-out setpoint adjuster or buttons
Integrated control of max. 2 fan coils with clima FCB boxes (see below) via 3-wire cable
6 inputs for fl oating contacts, e.g. light or sunblind switches
Available in 3 colours, suitable forTAE cover plates of- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Application according to LonMark and VDI 3813-2 complies with BAC Effi ciency Class A (EN 15232)
Frame not included
Frame and cover plate not included
410 302410 322410 342
Versions:clima FCB-24 2 x 24V AC/DC + fanclima FCB-230 2 x 230V triac + fanclima FCB-10V 2 x 0-10V + fan
Power supply:24V AC/DC: via 3 wire bus 230V AC: separate feed line
Metrics/Mounting:(HxWxD) 85 x 130 x 38mmmounting on fan housing, IP 54
clima FCBFan coil box for controlling a fan coil unit
Junction box for three-stage fan and 2 thermoelectric or continous drive actuators (0-10V)
2 inputs for fl oating contacts
Connectable to clima RCM-FC or clima RO-FC via 3-wire cable. Max. 2 fan coil boxes can be ope-rated in parallel
e.controlTM product catalogueRoom operation
57
Specifi cation Order No.Figure Technical data
Type 55 EnOcean push buttons and sensors
442 510 W442 510 B442 510 A
Model: pure white anthracite aluminium
Radio frequency/technology:868.3 MHz (EnOcean)
Range:max. 30m inside
Power supply:photovoltaic (>200lx@3h), battery-free
Metrics/mounting:(HxWxD) 71 x 71 x 25mmadhere or screw on all plane surfaces
dialog RC-TWireless room temperature sensor
Sensor for periodic transmission of room temperature (0...40°C)
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
442 511 W442 511 B442 511 A
dialog RC-TSWireless room control device
Same as dialog RC-T but with additional local setpoint adjuster
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Model: pure white anthracite aluminium
Radio frequency/technology:868.3 MHz (EnOcean)
Range:max. 30m inside
Power supply:photovoltaic (>200lx@3h), battery-free
Metrics/mounting:(HxWxD) 71 x 71 x 25mmadhere or screw on all plane surfaces
dialog RC-L1 / dialog RC-J1Wireless push rocker 1-gang
Sensor transmits push events for one group of lights or sunblinds
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
RC-L1 ( 0 / I ) pure white anthracite aluminiumRC-J1 (/) pure white anthracite aluminiumRC-N1 neutral pure white anthracite aluminium
Radio frequency/technology/range:868.3 MHz (EnOcean), battery-free, elec-trodynamic, max. 30m inside
Metrics:(HxWxD) 71 x 71 x 15mm
442 501 W442 501 B442 501 A442 505 W442 505 B442 505 A442 503 W442 503 B442 503 A
RC-L2 ( 0 / I ) pure white anthracite aluminiumRC-J2 (/) pure white anthracite aluminiumRC-N2 neutral pure white anthracite aluminium
Radio frequency/technology/range:868.3 MHz (EnOcean), battery-free, elec-trodynamic, max. 30m inside
Metrics:(HxWxD) 71 x 71 x 15mm
442 502 W442 502 B442 502 A442 506 W442 506 B442 506 A442 507 W442 507 B442 507 A
dialog RC-L2 / dialog RC-J2Wireless push rocker 2-gang
Sensor transmits push events for two groups of lights or sunblinds
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Available in 3 colours, suitable for- Berker S1, B1, B3, B7 glass- Gira E2, Event, Esprit- Jung A 500, A plus, A creation- Merten M-Plan, M-Star, M-Arc
Frame not included
Frame not included
Frame not included
Frame not included
Scale of images approx. 1:3
58 www.spega.com
Specification Order No.Figure Technical data
apera RC-FWireless window contact
Magnetic contact for monitoring window or door status
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Adhesive or screw mounting on plane surfaces
Model: white
Radio frequency/technology:868.3 MHz (EnOcean)
Range:max. 30m inside
Power supply:photovoltaic (>200lx@3h), battery-free
Metrics/mounting (HxWxD):Transmitter 110 x 19 x 15mmMagnet 15 x 10 x 37mmadhere or screw on window frame
412 901 W
EnOcean Window handles and contacts
apera RC-G1 whiteWireless window handle
Aluminium window handle with white coating and integrated radio transmitter for monitoring the win-dow status (open, tilted, closed)
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Lockable (optional)
RC-G1: without lockRC-G1 S: with lock
Radio frequency/technology:868.3 MHz (EnOcean)
Range:max. 30m inside
Power supply:electrodynamic, battery-free
Mounting:on window frameplease specify square pin length
412 902 W412 903 W
apera RC-G1 aluminiumWireless window handle
Aluminium window handle with integrated radio transmitter for mo-nitoring the window status (open, tilted, closed)
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Lockable (optional)
RC-G1: without lockRC-G1 S: with lock
Radio frequency/technology:868.3 MHz (EnOcean)
Range:max. 30m inside
Power supply:electrodynamic, battery-free
Mounting:on window frameplease specify square pin length
412 902 A412 903 A
apera RC-G2 stainless steelWireless window handle
Window handle made of stainless steel with integrated radio trans-mitter for monitoring the window status (open, tilted, closed)
Compatible with receivers dialog RC-E and lumina MS/RC (p. 59)
Lockable (optional)
RC-G2: without lockRC-G2 S: with lock
Radio frequency/technology:868.3 MHz (EnOcean)
Range:max. 30m inside
Power supply:electrodynamic, battery-free
Mounting:on window frameplease specify square pin length
412 904 VA412 905 VA
e.controlTM product catalogueWireless sensors and radio receivers
59
Specifi cation Order No.Figure Technical data
EnOcean Radio receivers
911 303 W911 303 A
lumina MS/RC-EBLON Multisensor w. radio receiver
Combination of presence detector, light sensor and radio receiver
Incorporates all controllers for inte-grated e.control room automation concept
Application supports occpuancy evaluation, constant light con-trol, thermal control and all room climate control functions according to VDI 3813-2 and BAC Effi ciency class A according to EN 15232
Model: pure white aluminium
Network / power supply:TP/FT-10 (FTT10)24V AC/DC, max. 55mA
Radio frequency/technology:868.3 MHz (EnOcean)
Metrics(M) / fi tting dimensions(F): (Ø x D) M: 79 x 66mm, F: 64 x 51mm
Available applications:SC911303CM f. external temp. controllerSC911303EC2 f. radiator, chilled ceiling, fan coil or VAV
911 304 W911 304 A
lumina MS/RC-APLON Multisensor w. radio receiver
Same as above but for surface-mounting
Model: pure white aluminium
Network / power supply:TP/FT-10 (FTT10)24V AC/DC, max. 55mA
Radio frequency/technology:868.3 MHz (EnOcean)
Metrics: (Ø x D) 97 x 50mm
Available applications:SC911303CM f. external temp. controllerSC911303EC2 f. radiator, chilled ceiling, fan coil or VAV
441 301 Cdialog RC-ELON Radio receiver
Radio receiver for converting EnOcean radio telegrams to LON messages via LonMark objects
16 wireless push buttons or sen-sors assignable
Application supports following VDI 3813 functions: temperature measurement, window monitoring, signal presence, adjust light and sunshade, adjust setpoint and scene management
Network:TP/FT-10 (FTT10)
Radio frequency/technology:868.3 MHz (EnOcean)with omni-directional antenna
Power supply:24V DC, max. 30mA
Metrics/mounting: (HxWxD) 120 x 80 x 42mm, on-wall mounting
Available application:SC441301EC2 f. 16 switches/sensors
412 906dialog RC-AMagnetic base antenna
Magnetic base antenna for dialog RC-E e.g. when installed in lowe-red ceilings
Replaces the standard omni-direc-tional antenna
Cable length:2.5 m
Radio frequency868.3 MHz
Metrics of antenna: (Ø x H) 29 x 88mm
60 www.spega.com
Specifi cation Order No.Figure Technical data
911 103 W911 103 A
lumina MS3-EBLON Multisensor
Combination of presence detector, light sensor and infrared receiver for mounting in suspended ceilings
Application includes occupancy evaluation, constant light control of 1 or 2 groups and functions for lighting and sunblinds according to VDI 3813, supports BAC Effi ciency class A according to EN 15232
Model: pure white aluminium
Network / power supply:TP/FT-10 (FTT10)24V AC/DC, max. 50mA
Optical detection (height 3m): sedentary Ø 6.0m walking Ø 12.0m
Metrics(M) / fi tting dimensions(F): (Ø x D) M: 79 x 66mm, F: 64 x 51mm
Available application:SC911103EC2
lumina MS-FBRemote control for multisensors
Infrared remote control for multi-sensor lumina MS3 (see above) to control: - 5 lights or sunblinds- 5 scenes- 1 fan (3-speed)- log-on / log-off
Maximum range: 8m
Power supply:3V battery
Metrics:(HxWxD) 70 x 54 x 8mm
910 111
911 104 W911 104 A
lumina MS3-APLON Multisensor
Same as above but for surface-mounting
Model: pure white aluminium
Network / power supply:TP/FT-10 (FTT10)24V AC/DC, max. 50mA
Optical detection (height 3m): sedentary Ø 6.0m walking Ø 12.0m
Metrics: (Ø x D) 97 x 50mm
Available application:SC911103EC2
Multisensors
911 105 W911 105 A
lumina MS3 miniLON Multisensor
Combination of presence detector, light sensor and infrared receiver for mounting in suspended ceilings or in luminaires
Application includes occupancy evaluation, constant light control of 1 or 2 groups and functions for lighting and sunblinds according to VDI 3813, supports BAC Effi ciency class A according to EN 15232
Model: pure white aluminium
Network / power supply:TP/FT-10 (FTT10)24V DC, max. 40mA
Optical detection (height 3m): sedentary Ø 5.0m walking Ø 10.0m
Metrics: Sensor (Ø x D): 36 (23) x 40mm Housing (HxWxD): 22 x 120 x 22mm
Available application:SC911103EC
e.controlTM product catalogueMultisensors and presence detectors
61
Specifi cation Order No.Figure Technical data
910 101 W910 101 A
lumina PM-EBPresence detector
PIR presence detector with high sensivity for suspended ceilings
Floating contacts for presence and lighting control, interconnectable with e.control binary input modules lumina T6 or B8 (see below)
Parameterisable via potentiome-ters or remote control (on request)
910 102 W910 102 A
lumina PM-APPresence detector
as above, but for surface-mounting
Model: pure white aluminium
Power supply:24V AC/DC, max. 40mA
Terminals:- Presence: fl oating cont., 24V, <1A- Light: fl oating cont., 24V, <1A- Slave input: for additional detectors
Optical detection (height 3m): sedentary Ø 6.0m walking Ø 12.0m
Metrics: (ØxD) 97 x 50mm
Presence detectors
Model: pure white aluminium
Power supply:24V AC/DC, max. 40mA
Terminals:- Presence: fl oating cont., 24V, <1A- Light: fl oating cont., 24V, <1A
Optical detection (height 3m): sedentary Ø 6.0m walking Ø 12.0m
Metrics(M) / fi tting dimensions(F): (ØxD) M: 79 x 85mm, F: 64 x 70mm
211 006 Clumina T6LON Digital input module
Compact fl ush mounting device for connecting devices with fl oating contacts (e.g. presence detectors) to the LON network
6 inputs for fl oating contacts
2 outputs 24V, 100mA for control lamps, relays etc.
Fits into fl ush mouting or cavity wall socket
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 50mA (w/o outputs)
Metrics/mounting:(HxWxD) 50 x 50 x 20mmIn cavity wall or fl ush mounting sockets
Available applications:SC211006EC: 6 switches 2 lamp actuators
NO / NC
6x
lumina B8LON Digital input 8 ports
8 inputs for installation push but-tons or other devices with fl oating contacts (e.g. window contacts, dew point sensors or presence detectors)
Powerful application for switching and dimming lamps, controlling sunblinds and recalling or storing scenes
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 60mA
Metrics/mounting:(HxWxD) 85(45) x 70 x 60mmDIN rail mounting
Available application:SC111008EC: 8 switches
111 008 C
NO / NC
8x
62 www.spega.com
M series - the modular concept
Prefabricated system distribution boxes and spega’s M series: it couldn’t be better!
There are definite advantages to the security of scheduled delivery of prefabricated and tested system distribution boxes combined with rapid on-site installation and faultless connection of field equipment. Since no building project is the same as the next, it is absolutely essential for the installed actuators to be variable. This is where the M series of spega gets full points. Up to 24 random input or output channels can be operated on a LON universal controller sistema MC and, thanks to the application-specific dimensioned modules, without any gain links or coupling relays. Compared with conventional solutions, this saves 50% in terms of space and wiring.
In addition to the extensive module range of the M series (see pp. 64-69), spega’s modular system also includes two types of ready-to-use metal-enclosed distribution boxes:
Distribution box S with plug-connectors Distribution box R with terminals
sistema MC (p . 64)
M series actuators (p . 64-69)
e .control distribution box
Example of a distribution box S with plug connectors for 4 segments
Modular distribution boxes
Cable entry and connection for a prefab-ricated distribution box R with terminals
e.control distribution box S
e.control distribution box R
A special feature of the system distribution box S is their extremely short and faultless installation and connection time on site. Here it is not even necessary to open the metal casing. The boxes thus have clearly defined guarantee limits at the connec-tors. The distribution boxes are as a rule available in different optimised sizes for decentralised room automation concepts. All sizes additionally have space for a 24V
System distribution boxes R require less co-ordination effort since coordination via plug types is not required. They are therefore suitable also for smaller building projects in which the planning effort involved for dis-tribution boxes with plug-connectors would
transformer for supplying actuators or motors and for the 24V DC system supply, which supplies not only the installed LON devices but also additional control devices and multisensors which are connected to the distribution box.
be inappropriate. A wide cable-entry open-ing with foam sealing facilitates the entry of the cables (see small illustration).
System distribution boxes R are likewise nor-mally available in different sizes. They also have space for a transformer and the DC system supply. External LON devices can thus be connected by means of additional terminals and also supplied.
Unlimited variety: random combinations of up to 24 I/O ports per universal controller
sistema MC M series modules (p. 64-69, up to 24 ports can be combined)
DALI
M~SMI MP-Bus
M
Connectors for LON control panels
e.controlTM product catalogueM series - modular system
63
M series - Distribution boxes
Specification Order No.Figure Technical data
System distribution box S
Sheet steel cabinet with quick re-lease fastener, accepts all e.control devices for DIN rail mounting
Applicable for installation in sus-pended ceilings or false floors
Quick and accurate mounting without opening due to plug- connectors
Project-specific shipment, ready-to-use and pre-tested
Material/protection:Sheet steel 1mm zinc plated, IP40
Plug system:Project-specific
Power supply:24V DC via external supply unit or230V AC with optional switching power supply 10/30/60VA
Metrics (HxWxD):Type S1: 80 x 600 x 250mm Type S2: 80 x 900 x 250mmOther sizes available
SYS-S
System distribution box R
Sheet steel cabinet mit quick re-lease fastener and cable port with strain relief, accepts all e.control devices for DIN rail mounting
Quick and accurate connection of preassembled cables due to terminal blocks
Project-specific shipment, ready-to-use and pre-tested
Material/protection:Sheet steel 1mm zinc plated, IP40
Terminal block system:Project-specific
Power supply:24V DC via external supply unit or230V AC with optional switching power supply 10/30/60VA
Metrics (HxWxD):Type R1: 80 x 600 x 350mm Type R2: 80 x 900 x 350mmOther sizes available
SYS-R
64 www.spega.com
Output ports (Type, quantity and power)
Digital, floating contact
Input ports (Type and quantity)
M series - Lighting modules
sistema MC
Order No.
Network type / transceiver
Supply voltage Current consumption (max.)Metrics (HxWxD)
LON Universal controller for modular actuatorsfor connecting M series modules with up to 24 I/O‘s
121 000 C
TP/FT-10 FTT10
24 V DC 40mA
Parameterisable via LNS plug-in
Controller: supported I/O ports Modules: max. claimed ports
Relay 230V AC
Control output 1-10V (current sink)
24(any combination)
Combinability (see also pages 66-69)
85(45) x 35 x 60mm
lumina SA4
Relay module 4 x 16Awith high-current contacts, suitable for electric loads, optional with hand op.
120 104 (w/o op.) 120 105 (with op.)
via controller 110mA
85(45) x 53 x 60mm
4 (16A)
lumina SA8
Relay module 8 x 10Awith high-current contacts, suitable for electric loads, optional with hand op.
120 108 (w/o op.) 120 109 (with op.)
via controller 200mA
85(45) x 70 x 60mm
8 (10A)
Controller Actuator modules
DALI groups (max. number of devices)
4 8
Sensor or actuator type (symbol)
Input modulelumina BE8
Digital input 8 portsfor floating contacts (e.g. window contacts, dew point or occup. sensors)
via controller 60mA
110 008
8
85(45) x 70 x 60mm
NO / NC
8
Presence detection Window monitoring
Dew point monitoringLight actuator
Control drive actuator
VDI 3813-2 Functions
Sensor functions
Actuator functions
Application functions Priority control Room utilisation control (Stairwell) Light control
Manipulated value limiting
Light actuator Control drive actuator
Priority control Room utilisation control (Stairwell) Light control
Manipulated value limiting
e.controlTM product catalogueM series - modular system
65
4 (max. 64 DALI devices)
DALI Controller 4 groupscontrol and supply of 64 DALI devices in 4 groups, suitable for MS-DAL
120 164
via controller 200mA
85(45) x 70 x 60mm
lumina DAL4
Control output 4 x 1-10V with 4 relays, suitable for electronic ballasts for fluorescent lamps
120 144 (w/o op.) 120 145 (with op.)
via controller 160mA
85(45) x 70 x 60mm
4 (10A)
lumina ST4
4
4 (40mA)
8 (max. 64 DALI devices)
DALI Controller 8 groupscontrol and supply of 64 DALI devices in 8 groups, suitable for MS-DAL
120 168
via controller 200mA
85(45) x 70 x 60mm
lumina DAL8
16 (max. 64 DALI devices)
DALI Controller 16 groupscontrol and supply of 64 DALI devices in 16 groups, suitable for MS-DAL
120 166
via controller 200mA
85(45) x 70 x 60mm
lumina DAL16
D A L I D A L ID A L I
Light actuator
Priority control Room utilisation control (Stairwell) Light control
Light actuator
Priority control Room utilisation control (Stairwell) Light control
Light actuator
Priority control Room utilisation control (Stairwell) Light control
Light actuator
Priority control Room utilisation control (Stairwell) Light control
4 8 16
66 www.spega.com
Sunblind act. 2x230VACfor motors with 3 limit switches, interlocking con-tacts, optional hand op.
85(45) x 53 x 60mm
2
M~230V AC
ombra BA2 ombra BA2-3E
Sunblind act. 4x230VACfor motors with 2 limit switches, interlocking con-tacts, optional hand op.
120 232 (w/o op.) 120 233 (with op.)
via controller40mA
85(45) x 70 x 60mm
ombra BA4
120 204 (w/o op.) 120 205 (with op.)
via controller60mA
Sunblind act. 2x230VACfor motors with 2 limit switches, interlocking con-tacts, optional hand op.
120 202 (w/o op.) 120 203 (with op.)
via controller40mA
85(45) x 53 x 60mm
2 4
M~ M~230V AC 230V AC
M series - Sunblind modules
sistema MC
LON Universal controller for modular actuatorsfor connecting M series modules with up to 24 I/O‘s
121 000 C
TP/FT-10 FTT10
24 V DC 40mA
Motor 230V AC with 2 limit switches
Motor 24V DC
Motor SMI 230V
24(any combination)
85(45) x 35 x 60mm
Output ports (Type, quantity and power)
Controller Actuator modules
Motor SMI LoVo
2 (250W)
2 (250W)
4 (250W)
Priority evaluation Room utilisation control (Stairwell) Light control
Shadow correction
Light actuator Sunshade actuatorPriority evaluation
Room utilisation control (Stairwell) Light control
Shadow correction
Light actuator Sunshade actuatorPriority evaluation
Room utilisation control (Stairwell) Light control
Shadow correction
Motor 230V AC with 3 limit switches
Light actuator Sunshade actuator
Order No.
Network type / transceiver
Supply voltage Current consumption (max.)Metrics (HxWxD)
Parameterisable via LNS plug-in
Controller: supported I/O ports Modules: max. claimed ports
Combinability (see also pages 64-65, 68-69)
Sensor or actuator type (symbol)
VDI 3813-2 Functions
Sensor functions
Actuator functions
Application functions
e.controlTM product catalogueM series - modular system
67
Sunblind act. 4 x 24V DCwith pole-reversing output for 4 DC motors, optional with hand operation
85(45) x 70 x 60mm
4 (1.0A)
Sunblind act. 4 x SMIfor 4 groups of 230V SMI motors (broadcast), with status feedback
230V AC 1,5VA
85(45) x 70 x 60mm
4 groups (broadcast) (max. 16 motors)
4 4
M_24V DC
ombra BA4-DC ombra BA4-SMI
120 214 (w/o op.) 120 215 (with op.)
via controller110mA
120 254 (w/o op.) 120 255 (with op.)
Sunblind act. 8 x SMIfor 8 groups of 230V SMI motors (addressed), with status feedback
230V AC 1,5VA
85(45) x 70 x 60mm
8 groups (addressed) (max. 16 motors)
8
ombra BA8-SMI
120 258 (w/o op.) 120 259 (with op.)
Sunbl. act. 4 x SMI LoVofor 4 groups of 24V SMI motors (broadcast), with status feedback
230V AC 1,5VA
85(45) x 70 x 60mm
4 groups (broadcast) (max. 16 motors)
4
ombra BA4-SMI LoVo
120 264 (w/o op.) 120 265 (with op.)
Sunbl. act. 8 x SMI LoVofor 8 groups of 24V SMI motors (addressed), with status feedback
230V AC 1,5VA
85(45) x 70 x 60mm
8 groups (addressed) (max. 16 motors)
8
ombra BA8-SMI LoVo
120 268 (w/o op.) 120 269 (with op.)
LoVo LoVo
Sunshade actuator
Priority evaluation Room utilisation control
Shadow correction
Sunshade actuator
Priority evaluation Room utilisation control
Shadow correction
Sunshade actuator
Priority evaluation Room utilisation control
Shadow correction
Sunshade actuator
Priority evaluation Room utilisation control
Shadow correction
Sunshade actuator
Priority evaluation Room utilisation control
Shadow correction
68 www.spega.com
via controller240mA
85(45) x 70 x 60mm
8 (output: 20mA)
120 348
8
Analogue I/O module 8 p.with reversible channels for sensors or actuators with 0-10V or 4-20mA
via controller140mA
85(45) x 53 x 60mm
clima AA8-10V
Analogue input/output 0(2)-10V, 0(4)-20mA
Universal ports (Type, quantity and power)
clima AA4-10V Universal I/O modules
Triac 24-230V AC 2-point (PWM) / 3-point (motor)Relays 3 stage (0-I-II-III)
MP Bus devices Actuators/sensors
sistema MC
121 000 C
TP/FT-10 FTT10
24 V DC 40mA
85(45) x 35 x 60mm
Controller
24(any combination)
4
Analogue I/O module 4 p.with reversible channels for sensors or actuators with 0-10V or 4-20mA
120 344
0-10V
M
M series - Analogue and digital I/O modules
4 (output: 20mA)
LON Universal controller for modular actuatorsfor connecting M series modules with up to 24 I/O‘s
Passive analogue (Pt1000, Ni1000, NTC<25k)
Input ports (Type and quantity)
Sensor moduleclima AE8-P
Analogue input 8 portfor passive temperature sensors (Pt1000, Ni1000, NTC<25k)
via controller40mA
110 058
8
85(45) x 70 x 60mm
8
Output ports (Type, quantity and power)
Pt, Ni, NTC 0-10V/4-20mA 0-10V
M
0-10V/4-20mA
Control drive actuator
VDI 3813-2 Functions
Sensor functions
Actuator functions
Application functions Priority evaluation Sequence control
Manipulated value limiting
Control drive actuator
Priority evaluation Sequence control
Manipulated value limiting
Temperature measurementWindow monitoring
Dew point monitoring
Temperature measurementAir quality measurement
Rel. humidity measurement
Temperature measurementAir quality measurement
Rel. humidity measurement
Order No.
Network type / transceiver
Supply voltage Current consumption (max.)Metrics (HxWxD)
Parameterisable via LNS plug-in
Controller: supported I/O ports Modules: max. claimed ports
Combinability (see also pages 64-67)
Sensor or actuator type (symbol)
e.controlTM product catalogueM series - modular system
69
clima LA2-3
Multi-stage switch 230V2 x 3 stagesfor two 3-speed fans with interlocking relays
via controller40mA
85(45) x 53 x 60mm
clima AA4-MP
MP-Bus Controller 4 portfor 4 MP-Bus-compatible flap, valve or VAV actuators plus sensors
via controller45mA
85(45) x 53 x 60mm
120 332
2 (250W)
120 354
4 / 4
clima AA8
2 4 actuators 4 sensors
I-II-III
M~
clima AA4
via controller70mA
85(45) x 70 x 60mm
8 / 4 (500mA)
Digital output 4 portfor 4 thermoelectric or 2 motor-driven actuators with 24V or 230V AC
via controller40mA
4 / 2 (750mA)
120 324
4 8
Digital output 8 portfor 8 thermoelectric or 4 motor-driven actuators with 24V or 230V AC
120 328
2-P/3-P
M
2-P/3-P
M
85(45) x 53 x 60mm
Actuator modules
Light actuator Control drive actuator
Priority evaluation Sequence control
Manipulated value limiting
Light actuator Control drive actuator
Priority evaluation Sequence control
Manipulated value limiting
Control drive actuator
Priority evaluation Sequence control
Manipulated value limiting
Control drive actuator
Priority evaluation Sequence control
Manipulated value limiting
Temperature measurementAir quality measurement
Rel. humidity measurement
clima AA8-MP
MP-Bus Controller 8 portfor 8 MP-Bus-compatible flap, valve or VAV actuators plus sensors
via controller45mA
85(45) x 53 x 60mm
120 358
8 / 8
8 actuators 8 sensors
Control drive actuator
Priority evaluation Sequence control
Manipulated value limiting
Temperature measurementAir quality measurement
Rel. humidity measurement
70 www.spega.com
Specification Order No.Figure Technical data
Switch actuators
121 104 C 121 105 C
lumina RSA4 LON Switch actuator 4 ports, 16A
Relay module for independent switching of 4 electric loads with separate feed-in for each output
High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 3000W halogen lamps: 2500W fluorescent lamps: 1500W comp.
Stairwell lighting, switch-on/off delay and scene memory with 10 scenes per channel
RSA4 w/o hand operationRSA4-b with hand operation Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 150mA
Metrics/mounting: (HxWxD) 85(45) x 88 x 60mmDIN rail mounting
Available application: SC121000RC2: 4 lamp actuators 7 lamp group ctrl.
121 108 C 121 109 C
lumina RSA8 LON Switch actuator 8 ports, 10A
Relay module for independent switching of 8 electric loads with separate feed-in for 2 outputs
High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 2000W halogen lamps: 1700W fluorescent lamps: 1000W comp.
Stairwell lighting, switch-on/off delay and scene memory with 10 scenes per channel
RSA8 w/o hand operationRSA8-b with hand operation Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 240mA
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application: SC121000RC2: 8 lamp actuators 7 lamp group ctrl.
121 112 C 121 113 C
lumina RSA12 LON Switch actuator 12 ports, 16A
Relay module for independent switching of 12 electric loads with separate feed-in for each output
High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 3000W halogen lamps: 2500W fluorescent lamps: 1500W comp.
Stairwell lighting, switch-on/off delay and scene memory with 10 scenes per channel
RSA12 w/o hand operationRSA12-b with hand operation Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 370mA
Metrics/mounting: (HxWxD) 85(45) x 192 x 60mmDIN rail mounting
Available application: SC121000RC2: 12 lamp actuators 7 lamp group ctrl.
121 116 C 121 117 C
lumina RSA16 LON Switch actuator 16 ports, 10A
Relay module for independent switching of 16 electric loads with separate feed-in for 2 outputs
High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 2000W halogen lamps: 1700W fluorescent lamps: 1000W comp.
Stairwell lighting, switch-on/off delay and scene memory with 10 scenes per channel
RSA16 w/o hand operationRSA16-b with hand operation Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 440mA
Metrics/mounting: (HxWxD) 85(45) x 175 x 60mmDIN rail mounting
Available application: SC121000RC2: 16 lamp actuators 7 lamp group ctrl.
4x
8x
12x
16x
e.controlTM product catalogueR series - lighting actuators
71
Specification Order No.Figure Technical data
Lighting controllers for DALI and 1-10V
121 144 C 121 145 C
lumina RST4 LON Control output 1-10V, 4 ports
Module for independent switching and dimming of 4 groups of elec-tronic ballasts with 1-10V interface
High current relay contacts (120A) for fluorescent lamps with max. 1000W (comp.) per channel
Stairwell lighting, switch-on/off delay, variable dimming ramp and scene memory with 10 scenes per channel
RST4 w/o hand operationRST4-b with hand operation Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 200mA
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application: SC121000RC2: 4 lamp actuators 7 lamp group ctrl.
121 148 C 121 149 C
lumina RST8 LON Control output 1-10V, 8 ports
Module for independent switching and dimming of 8 groups of elec-tronic ballasts with 1-10V interface
High current relay contacts (120A) for fluorescent lamps with max. 1000W (comp.) per channel
Stairwell lighting, switch-on/off delay, variable dimming ramp and scene memory with 10 scenes per channel
RST8 w/o hand operationRST8-b with hand operation Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 360mA
Metrics/mounting: (HxWxD) 85(45) x 175 x 60mmDIN rail mounting
Available application: SC121000RC2: 8 lamp actuators 7 lamp group ctrl.
121 168 Clumina RDAL8 LON DALI Controller 8 groups
Module for supplying and indepen-dent controlling of up to 64 DALI devices devided in up to 8 groups
Monitoring of lamp status
Manual switch on/off operation
Commissioning via LNS plug-in or directly with notebook
Stairwell lighting, switch-on/off delay, variable dimming ramp and scene memory for 10 scenes
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 240mA
Load:Supply of max. 64 DALI devices
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application: SC121000RC2: 8 lamp actuators 7 lamp group ctrl.
121 166 Clumina RDAL16 LON DALI Controller 16 groups
Module for supplying and indepen-dent controlling of up to 64 DALI devices devided in up to 16 groups
Monitoring of lamp status
Manual switch on/off operation
Commissioning via LNS plug-in or directly with notebook
Stairwell lighting, switch-on/off delay, variable dimming ramp and scene memory for 10 scenes
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 240mA
Load:Supply of max. 64 DALI devices
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application: SC121000RC2: 16 lamp actuators 7 lamp group ctrl.
1-10V
1-10V
4x
8x
8x
16x
D A L I
D A L I
72 www.spega.com
Specification Order No.Figure Technical data
Universal dimmers
121 152 Clumina RDA2-UNLON Universal dimmer 2 x 570W
2 port universal dimmer for incan-discent lamps, high-voltage halo-gen lamps or low-voltage halogen lamps with wound or electronic transformers
Automatic load detection and overload protection
Parallel operation of both ports to increase output power to 1140VA
Stairwell lighting, switch-on/off delay, variable dimming ramp and scene memory for 10 scenes
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 40mA
Load:2 x 10... 570VA or 1 x 10...1140VA resistive, inductive or capacitive load with auto-detection
Metrics/mounting:(HxWxD) 90 x 123 x 50mmDIN rail mounting
Available application:SC121154EC2: 2 lamp actuators 7 lamp group ctrl.
121 154 Clumina RDA4-UNLON Universal dimmer 4 x 570W
4 port universal dimmer for incan-discent lamps, high-voltage halo-gen lamps or low-voltage halogen lamps with wound or electronic transformers
Automatic load detection and overload protection
Parallel operation of 2 ports to increase output power to 1140VA
Stairwell lighting, switch-on/off delay, variable dimming ramp and scene memory for 10 scenes
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 40mA
Load:4 x 10... 570VA or 2 x 10...1140VA resistive, inductive or capacitive load with auto-detection
Metrics/mounting:(HxWxD) 90 x 210 x 50mmDIN rail mounting
Available application:SC121154EC2: 4 lamp actuators 7 lamp group ctrl.
R,L,C
R,L,C
2x
4x
e.controlTM product catalogueR series - lighting & sunblind actuators
73
Specification Order No.Figure Technical data
Sunblind actuators
121 202 C 121 203 C
ombra RBA2 LON Sunblind actuator 2 ports
Relay module for 2 AC motors for sunblinds, shutters or windows
Max. motor power 250W, inter-locked contacts and separate feed-in for each port
Appropriate to slat tracking and shadow correction control
Parameterisable power-on and protection behaviour, scene me-mory for 10 positions including slat angle per channel
RBA2 w/o hand operationRBA2-b with hand operation
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 80mA
Metrics/mounting: (HxWxD) 85(45) x 88 x 60mmDIN rail mounting
Available application: SC121000RC2: 2 sunblind actuators 7 sunbl. group ctrl.
121 204 C 121 205 C
ombra RBA4 LON Sunblind actuator 4 ports
Relay module for 4 AC motors for sunblinds, shutters or windows
Max. motor power 250W, inter-locked contacts and separate feed-in for each port
Appropriate to slat tracking and shadow correction control
Parameterisable power-on and protection behaviour, scene me-mory for 10 positions including slat angle per channel
RBA4 w/o hand operationRBA4-b with hand operation
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 100mA
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application: SC121000RC2: 4 sunblind actuators 7 sunbl. group ctrl.
121 208 C 121 209 C
ombra RBA8 LON Sunblind actuator 8 ports
Relay module for 8 AC motors for sunblinds, shutters or windows
Max. motor power 250W, inter-locked contacts and separate feed-in for each port
Appropriate to slat tracking and shadow correction control
Parameterisable power-on and protection behaviour, scene me-mory for 10 positions including slat angle per channel
RBA8 w/o hand operationRBA8-b with hand operation
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 160mA
Metrics/mounting: (HxWxD) 85(45) x 175 x 60mmDIN rail mounting
Available application: SC121000RC2: 8 sunblind actuators 7 sunbl. group ctrl.
121 212 C 121 213 C
RBA12 w/o hand operationRBA12-b with hand operation
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 220mA
Metrics/mounting: (HxWxD) 85(45) x 245 x 60mmDIN rail mounting
Available application: SC121000RC2: 12 sunblind actuators 7 sunbl. group ctrl.
ombra RBA12 LON Sunblind actuator 12 ports
Relay module for 12 AC motors for sunblinds, shutters or windows
Max. motor power 250W, inter-locked contacts and separate feed-in for each port
Appropriate to slat tracking and shadow correction control
Parameterisable power-on and protection behaviour, scene me-mory for 10 positions including slat angle per channel
M~
M~
M~
M~
2 x
4 x
8 x
12 x
74 www.spega.com
Specification Order No.Figure Technical data
121 214 C 121 215 C
ombra RBA4-DC LON Sunblind actuator 4 ports for 24V DC motors
Relay module for 24V DC motors for sunblinds, shutters or windows
4 pole-reversing outputs for max. current of 1 A per channel, requires no separate control unit
Appropriate to slat tracking and shadow correction control
Parameterisable power-on and protection behaviour as well as scene memory for each channel
RBA4-DC w/o hand operation RBA4-DC-b with hand operation Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 150mA
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application: SC121000RC2: 4 sunblind actuators 7 sunbl. group ctrl.
M_4 x
121 218 C 121 219 C
ombra RBA8-DC LON Sunblind actuator 8 ports for 24V DC motors
Relay module for 24V DC motors for sunblinds, shutters or windows
8 pole-reversing outputs for max. current of 1 A per channel, requires no separate control unit
Appropriate to slat tracking and shadow correction control
Parameterisable power-on and protection behaviour as well as scene memory for each channel
RBA8-DC w/o hand operation RBA8-DC-b with hand operation Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 260mA
Metrics/mounting: (HxWxD) 85(45) x 175 x 60mmDIN rail mounting
Available application: SC121000RC2: 8 sunblind actuators 7 sunbl. group ctrl.
M_8 x
Sunblind actuators
121 232 C 121 233 C
ombra RBA2-3E LON Sunblind actuator 2 ports for AC motors with 3 limit switches
Relay module for 2 sunblind mo-tors with 3 limit switches
Max. motor power 250W, inter-locked contacts and separate feed-in for each port
Appropriate to slat tracking and shadow correction control
Parameterisable power-on and protection behaviour as well as scene memory for each channel
RBA2-3E w/o hand operationRBA2-3E-b with hand operation
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 80mA
Metrics/mounting: (HxWxD) 85(45) x 88 x 60mmDIN rail mounting
Available application: SC121000RC2: 2 sunblind actuators 7 sunbl. group ctrl.
M~
M~
2x
4x
121 234 C 121 235 C
ombra RBA4-3E LON Sunblind actuator 4 ports for AC motors with 3 limit switches
Relay module for 4 sunblind mo-tors with 3 limit switches
Max. motor power 250W, inter-locked contacts and separate feed-in for each port
Appropriate to slat tracking and shadow correction control
Parameterisable power-on and protection behaviour as well as scene memory for each channel
RBA4-3E w/o hand operationRBA4-3E-b with hand operation
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 120mA
Metrics/mounting: (HxWxD) 85(45) x 140 x 60mmDIN rail mounting
Available application: SC121000RC2: 4 sunblind actuators 7 sunbl. group ctrl.
e.controlTM product catalogueR series - sunblind actuators
75
Specification Order No.Figure Technical data
Sunblind actuators for SMI drives
121 254 C121 255 C
ombra RBA4-SMI LON SMI Sunblind actuator 4 ports
Module for accurate positioning of max. four groups of 230V SMI sunblind motors
Monitoring of motor status
Appropriate to slat tracking and shadow correction control due to accurate positioning control (<2°)
Parameterisable power-on and protection behaviour as well as scene memory for each channel
RBA4-SMI w/o hand operationRBA4-SMI-b with hand operation
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 50mA Mains: 230V AC max. 1.5W
Ports:4 SMI (broadcast), max. 16 motors
Metrics: (HxWxD) 85(45) x 105 x 60mm
Available application: SC121000RC2: 4 sunblind actuators
121 257 Combra RBA16-SMI LON SMI Sunblind act. 16 groups
Module for accurate positioning of max. 16 SMI sunblind motors 230V in user-defined groups
Monitoring of motor status
Appropriate to slat tracking and shadow correction control due to accurate positioning control (<2°)
Parameterisable power-on and protection behaviour as well as scene memory for each group
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 50mA Mains: 230V AC max. 1.5W
Ports:SMI (addressed), max. 16 motors
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application: SC121000RC2: 16 sunblind actuators 7 sunbl. group ctrl.
M~
M~
4x
16x
121 264 C121 265 C
ombra RBA4-SMI LoVo LON SMI Sunblind actuator 4 ports
Module for accurate positioning of max. four groups of 24V DC SMI sunblind motors
Monitoring of motor status
Appropriate to slat tracking and shadow correction control due to accurate positioning control (<2°)
Parameterisable power-on and protection behaviour as well as scene memory for each channel
RBA4-LoVo w/o hand operationRBA4-LoVo-b with hand operation
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 50mA Mains: 230V AC max. 1.5W
Ports:4 SMI (broadcast), max. 16 motors
Metrics: (HxWxD) 85(45) x 105 x 60mm
Available application: SC121000RC2: 4 sunblind actuators
121 267 Combra RBA16-SMI LoVo LON SMI Sunblind act. 16 groups
Module for accurate positioning of max. 16 SMI sunblind motors 24V DC in user-defined groups
Monitoring of motor status
Appropriate to slat tracking and shadow correction control due to accurate positioning control (<2°)
Parameterisable power-on and pro-tection behaviour as well as scene memory for each group
Network/power supply:Type: TP/FT-10 (FTT10)Voltage: 24V DC, max. 50mA Mains: 230V AC max. 1.5W
Ports:SMI (addressed), max. 16 motors
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application: SC121000RC2: 16 sunblind actuators 7 sunbl. group ctrl.
4x
16x
M_
M_
LoVo
LoVo
76 www.spega.com
Specification Order No.Figure Technical data
Digital inputs
lumina B8 LON Digital input 8 ports
8 inputs for installation push but-tons or other devices with floating contacts (e.g. window contacts, dew point sensors or presence detectors)
Powerful application for switching and dimming lamps, controlling sunblinds and recalling or storing scenes
lumina B16 LON Digital input 16 ports
16 inputs for installation push but-tons or other devices with floating contacts (e.g. window contacts, dew point sensors or presence detectors)
Powerful application for switching and dimming lamps, controlling sunblinds and recalling or storing scenes
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 60mA
Metrics/mounting:(HxWxD) 85(45) x 70 x 60mmDIN rail mounting
Available application:SC111008EC: 8 switches
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 160mA
Metrics/mounting:(HxWxD) 85(45) x 175 x 60mmDIN rail mounting
Available application:SC111008EC: 16 switches
111 008 C
111 016 C
NO / NC
NO / NC
8x
16x
211 006 Clumina T6 LON Digital input module
Compact flush mounting device connecting installation push buttons to LON networks for lighting or sunblind control, scene re-calling or log-on/-off
6 inputs for floating contacts
2 outputs 24V, 100mA for control lamps, relays etc.
Suitable for all installation push buttons, fits into deep flush mou-ting or cavity wall socket
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 50mA (w/o outputs)
Metrics/mounting:(HxWxD) 50 x 50 x 20mmIn cavity wall or flush mounting sockets
Available applications:SC211006EC: 6 switches 2 lamp actuators
Example of use: switch not included
NO / NC
6x
411 408 Clumina BK8LON Digital input module
8 inputs for push buttons or other devices with floating contacts (e.g. window contacts, dew point sensors or occupancy sensors)
Plastic case, cable entry points with strain relief, protection class IP54 (IP65 on request)
External 24V power supply via bus cable
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 65mA
Metrics: (HxWxD) 63 x 254 x 180mm
Available application: SC111008EC 8 switches8 x
NO / NC
e.controlTM product catalogueR series - digital inputs & outputs
77
Specification Order No.Figure Technical data
Digital outputs
121 324 Cclima RAA4LON Digital output 4 ports
Triac outputs for 4 thermoelectric or 2 motor-driven actuators with 24 - 230V AC operating voltage
On/off, open/close or pulse width modulated operation selectable via software
Parameterisable pulse-duration, output limits and motor runtime
Automatic valve maintenance function during non-use periods
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 80mA
Load:24-230V AC, max. 750mA per output
Metrics/mounting: (HxWxD) 85(45) x 88 x 60mmDIN rail mounting
Available application: SC121000RC2: 4 damper actuators 7 group controllers
4x
121 328 Cclima RAA8LON Digital output 8 ports
Triac outputs for 8 thermoelectric or 4 motor-driven actuators with 24 - 230V AC operating voltage
On/off, open/close or pulse width modulated operation selectable via software
Parameterisable pulse-duration, output limits and motor runtime
Automatic valve maintenance function during non-use periods
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 110mA
Load:24-230V AC, max. 500mA per output
Metrics/mounting: (HxWxD) 85(45) x 105 x 60mm DIN rail mounting
Available application: SC121000RC2: 8 damper actuators 7 group controllers
8x
121 322 C
121 326 C
clima RAA12LON Digital output 12 ports
Triac outputs for 12 thermoelectric or 6 motor-driven actuators with 24 - 230V AC operating voltage
On/off, open/close or pulse width modulated operation selectable via software
Parameterisable pulse-duration, output limits and motor runtime
Automatic valve maintenance function during non-use periods
clima RAA16LON Digital output 16 ports
Triac outputs for 16 thermoelectric or 8 motor-driven actuators with 24 - 230V AC operating voltage
On/off, open/close or pulse width modulated operation selectable via software
Parameterisable pulse-duration, output limits and motor runtime
Automatic valve maintenance function during non-use periods
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 150mA
Load:24-230V AC, max. 500mA per output
Metrics/mounting: (HxWxD) 85(45) x 158 x 60mm DIN rail mounting
Available application: SC121000RC2: 12 damper actuators 7 group controllers
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 180mA
Load:24-230V AC, max. 500mA per output
Metrics/mounting: (HxWxD) 85(45) x 175 x 60mm DIN rail mounting
Available application: SC121000RC2: 16 damper actuators 7 group controllers
12x
16x
2x
4x
6x
8x
2-P/PDM
M
3-P
M
2-P/PDM
M
3-P
M
2-P/PDM
M
2-P/PDM
M
3-P
M
3-P
M
or
or
or
or
78 www.spega.com
Specification Order No.Figure Technical data
Analogue inputs/outputs
4x
0-10V 0-20mA
M
8x
0-10V 0-20mA
M
12x
0-10V 0-20mA
M
121 344 Cclima RAA4-10VLON Analogue I/O module 4 ports
Module for 4 sensors or actuators with analogue control signal
Input or output signal adjustable per channel via software: 0-10V, 2-10V, 0-20mA or 4-20mA
Parameterisable output limitation and valve maintenance function during non-use periods, change-able network variables for input signal mapping
Network/power supply:TP/FT-10 (FTT10)24V DC, max. 180mA
Output current:max. 20mA each
Input:10 bit resolution, resistance 100kΩ
Metrics: (HxWxD) 85(45) x 88 x 60mm
Available applications: SC121000RC2: 4 damper actuators or I/O universal objects
121 348 Cclima RAA8-10VLON Analogue I/O module 8 ports
Module for 8 sensors or actuators with analogue control signal
Input or output signal adjustable per channel via software: 0-10V, 2-10V, 0-20mA or 4-20mA
Parameterisable output limitation and valve maintenance function during non-use periods, change-able network variables for input signal mapping
Network/power supply:TP/FT-10 (FTT10)24V DC, max. 280mA
Output current:max. 20mA each
Input:10 bit resolution, resistance 100kΩ
Metrics: (HxWxD) 85(45) x 105 x 60mm
Available applications: SC121000RC2: 8 damper actuators or I/O universal objects
121 342 Cclima RAA12-10VLON Analogue I/O module 12 ports
Module for 12 sensors or actuators with analogue control signal
Input or output signal adjustable per channel via software: 0-10V, 2-10V, 0-20mA or 4-20mA
Parameterisable output limitation and valve maintenance function during non-use periods, change-able network variables for input signal mapping
Network/power supply:TP/FT-10 (FTT10)24V DC, max. 420mA
Output current:max. 20mA each
Input:10 bit resolution, resistance 100kΩ
Metrics: (HxWxD) 85(45) x 158 x 60mm
Available applications: SC121000RC2: 12 damper actuators or I/O universal objects
16x
0-10V 0-20mA
M
121 346 Cclima RAA16-10VLON Analogue I/O module 16 ports
Module for 16 sensors or actuators with analogue control signal
Input or output signal adjustable per channel via software: 0-10V, 2-10V, 0-20mA or 4-20mA
Parameterisable output limitation and valve maintenance function during non-use periods, change-able network variables for input signal mapping
Network/power supply:TP/FT-10 (FTT10)24V DC, max. 500mA
Output current:max. 20mA each
Input:10 bit resolution, resistance 100kΩ
Metrics: (HxWxD) 85(45) x 175 x 60mm
Available applications: SC121000RC2: 16 damper actuators or I/O universal objects
0-10V 0-20mA
0-10V 0-20mA
0-10V 0-20mA
0-10V 0-20mA
4x
8x
12x
16x
or
or
or
or
e.controlTM product catalogueR series - analogue inputs & outputs
79
Specification Order No.Figure Technical data
MP-Bus Controllers
clima RAA4-MP LON MP-Bus Controller 4 ports
Controller module for 4 damper, flap, valve or VAV actuators with MP-Bus interface
Monitoring of actuator status
Utilisation of sensors connected to MP-Bus actuators (0-10V, resistive or floating contact)
Parameterisable output limitation and valve maintenance function, changeable network variables for input signal mapping
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 85mA
Metrics/mounting:(HxWxD) 85(45) x 88 x 60mmDIN rail mounting
Available application:SC121000RC2: 4 damper actuators 4 sensor objects 7 group controllers
121 354 C
clima RAA8-MP LON MP-Bus Controller 8 ports
Controller module for 8 damper, flap, valve or VAV actuators with MP-Bus interface
Monitoring of actuator status
Utilisation of sensors connected to MP-Bus actuators (0-10V, resistive or floating contact)
Parameterisable output limitation and valve maintenance function, changeable network variables for input signal mapping
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 85mA
Metrics/mounting:(HxWxD) 85(45) x 88 x 60mmDIN rail mounting
Available application:SC121000RC2: 8 damper actuators 8 sensor objects 7 group controllers
121 358 C
80 www.spega.com
Specification Order No.Figure Technical data
M~
M~
4 x
8 x
ombra FBA4 LON Sunblind actuator 4 ports
Ready-to-use relay module in sheet steel cabinet with plug-and-socket connectors for 4 AC motors for sunblinds, shutters or windows
Appropriate to slat tracking and shadow correction
Parameterisable power-on and protection behaviour, scene me-mory for 10 positions per channel including slat angle
Network:TP/FT-10 (FTT10)
Power supply: 230V AC, max. 16A
Motor load (per output):max. 250W, with micro-fuse 6.3A
Metrics/mounting: (HxWxD) 70 x 292 x 77mm, mounting in false floor, susp. ceiling or cable route
Available application: SC121204EC: 4 sunblind actuators 3 sunbl. group ctrl.
321 204 C
ombra FBA8 LON Sunblind actuator 8 ports
Ready-to-use relay module in sheet steel cabinet with plug-and-socket connectors for 8 AC motors for sunblinds, shutters or windows
Appropriate to slat tracking and shadow correction
Parameterisable power-on and protection behaviour, scene me-mory for 10 positions per channel including slat angle
FBA8 1-phase supplyFBA8-5 3-phase supply
Network/power supply:type TP/FT-10 (FTT10)voltage 230V AC, 16A (3 x 16A)
Motor load (per output):max. 250W, with micro-fuse 6.3A
Metrics: (HxWxD) 70 x 432 x 77mm
Available application: SC121208EC: 8 sunblind actuators 3 sunbl. group ctrl.
321 208 C321 209 C
FastCon Actuators
321 104 Clumina FSA4 LON Switch actuator 4 ports
Ready-to-use relay module in sheet steel cabinet with plug-and-socket connectors for independent swit-ching of 4 electric loads
High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 3000W halogen lamps: 2500W fluorescent lamps: 1500W comp.
Stairwell lighting, switch-on/off delay and scene memory
Network:TP/FT-10 (FTT10)
Power supply:230V AC, max. 16A
Metrics/mounting: (HxWxD) 70 x 292 x 77mm Mounting in false floor, suspended ceiling or on cable route
Available application: SC121104EC: 4 lamp actuators 3 lamp group ctrl.
4 x
321 108 C321 109 C
lumina FSA8 LON Switch actuator 8 ports
Ready-to-use relay module in sheet steel cabinet with plug-and-socket connectors for independent swit-ching of 8 electric loads
High-current relay contacts (120A) for capacitive lamp loads: incandiscent lamps: 3000W halogen lamps: 2500W fluorescent lamps: 1500W comp.
Stairwell lighting, switch-on/off delay and scene memory
FSA8 1-phase supplyFSA8-5 3-phase supply
Network/power supply:Type TP/FT-10 (FTT10)Voltage 230V AC, 16A (3 x 16A)
Metrics/mounting: (HxWxD) 70 x 432 x 77mm Mounting in false floor, suspended ceiling or on cable route
Available application: SC121108EC: 8 lamp actuator 3 lamp group ctrl.
8 x
e.controlTM product catalogueFastCon and Fire damper modules
81
Specification Order No.Figure Technical data
Fire and smoke damper modules
421 404 Cclima BSK4-FLON Fire damper actuator 4 ports
Module to control 4 fire or smoke dampers with 24V AC/DC spring return drive
8 inputs for floating contacts to indicate open-end and closed-end position
External 24V power supply via bus cable
Application according to LonMark profile „Fire Smoke Damper Act.“
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 120mA
Max. load (per relay):24V AC/DC, 1A
Metrics: (HxWxD) 63 x 254 x 180mm
Available application: SC421404EC 4 fire smoke damper actuators
24V AC/DC
4 x
411 408 Cclima BSK8-ELON Fire damper position indicator
Module with 8 inputs for position indicator switches of up to 8 fire dampers
Plastic case, cable entry points with strain relief, protection class IP54 (IP65 on request)
External 24V power supply via bus cable
Applications according to LonMark to initiate and forward fire alams or to monitor states of binary contacts
Network:TP/FT-10 (FTT10)
Power supply:24V AC/DC, max. 65mA
Metrics: (HxWxD) 63 x 254 x 180mm
Available applications: SC411408EC 8 fire smoke damper actuators
8 x
411 409 Cclima BSK8-E230LON Fire damper position indicator
Module with 8 inputs for position indicator switches of up to 8 fire dampers
Plastic case, cable entry points with strain relief, protection class IP54 (IP65 on request)
Integrated 230V power supply
Applications according to LonMark to initiate and forward fire alams or to monitor states of binary contacts
Network:TP/FT-10 (FTT10)
Power supply:230V AC, max. 2W
Metrics: (HxWxD) 63 x 254 x 180mm
Available applications: SC411408EC 8 fire smoke damper actuators
8 x
230V AC
4 x
421 405 Cclima BSK4-F230LON Fire damper actuator 4 ports
Module to control 4 fire or smoke dampers with 230V AC spring return drive
8 inputs for floating contacts to indicate open-end and closed-end position
Integrated 230V power supply
Application according to LonMark profile „Fire Smoke Damper Act.“
Network:TP/FT-10 (FTT10)
Power supply:230V AC, max. 4W
Max. load (per relay):230V AC, max. 250W
Metrics: (HxWxD) 63 x 254 x 180mm
Available application: SC421404EC 4 fire smoke damper actuators
NO / NC
NO / NC
82 www.spega.com
Specification Order No.Figure Technical data
411 202 Combra W2LON compact weather sensor
Compact device for daylight and temperature-dependent controls
Integrated light and temperature sensor
With terminal for wind speed sen-sor ombra W1-Wh or rain sensor ombra W1-R
Safety class IP54, weatherproof, mounting angle enclosed
Network/power supply:Type TP/FT-10 (FTT10)Voltage 24V DC, max. 20mA
Metrics/mounting:(HxWxD) 93 x 72 x 57mmPole- or wall-mounting
Available application:SC411202EC: Light sensor Temperature sensor Wind speed sensor Rain sensor Protection controller Sunlight controller
ombra W1-Wh Wind speed sensor for ombra W2
Compact sensor for vectorial wind speed measurement
Connectable to compact weather sensor ombra W2
Integrated automatic heating for ice free usage up to -30°C
Safety class IP54, weatherproof, mounting angle enclosed
Power supply:24V DC, max. 1A
Measurement signal:Pulse, reed contact
Measurement range:0.5...40 m/s
Metrics/mounting:(HxØ) 160 x 134mmPole- or wall-mounting
410 203
ombra W1-R Rain sensor for ombra W2
Compact sensor for rain and snow detection
Connectable to compact weather sensor ombra W2 or to any binary input (e.g. lumina T6/B8)
Integrated automatic heating for ice free usage up to -30°C
Safety class IP54, weatherproof, mounting angle enclosed
Power supply:24V DC, max. 150mA
Measurement signal:Binary, floating contact
Metrics/mounting:(HxWxD) 18 x 76.5 x 54mmPole- or wall-mounting
410 202
Compact weather sensor
ombra W1-K Terminal box for ombra W2
For wiring wind speed sensor or rain sensor to compact weather sensor ombra W2
With terminal block for power supply, LON bus and sensor signal
Safety class IP65, weatherproof
Material:Polycarbonate
Accessories:8 terminal blocks 2,5mm 3 screwed cable glands IP65
Metrics/mounting:(HxWxD) 140 x 140 x 80mm
950 201
e.controlTM product catalogueWeather sensors
83
Specification Order No.Figure Technical data
Weather station
111 288 Combra W8 LON Sensor unit for 8 sensors
Module for collecting and pro-cessing of all weather data from combined sensor ombra W7-C and wind direction sensor ombra W1-D
8 analogue inputs 0-10V
Integrated weather protection controllers for 4 facades
Network/power supply:Type TP/FT-10 (FTT10)Voltage 24V DC, max. 110mA
Metrics/mounting:(HxWxD) 85(45) x 105 x 60mmDIN rail mounting
Available application:SC111288EC: Light sensor (3x) Temperature sensor Rel. humidity sensor Wind speed sensor Wind direction sensor Rain sensor Weather protection
ombra W7-C Combined weather sensor
Sensor for measurement of:- wind speed - rain - outdoor brightness (3 x) - outdoor temperature - relative humidity
Integrated automatic heating as condensation protection
Safety class IP65, weatherproof
Power supply:24V AC/DC, max. 650mA
Metering range/accuarcy:wind: 1...40m/s / 0,5m/s rain: yes/no / 1bitbrightness: 0...150kLx / 10% temperature -20...60°C / 0,2°Chumidity: 0...100% (rel.) / 3%
Metrics/mounting:(HxØ) 430 x 130 mmPole- or wall-mounting
ombra W1-D Wind direction sensor
Sensor for indicating wind direction
Integrated automatic heating for ice free usage up to -30°C
Safety class IP65, weatherproof
Power supply:24V AC/DC, max. 830mA
Metering range/accuracy:direction: 0...360° / 5°
Metrics/mounting:(HxØ) 220 x 50 mmLength of vane 165 mm Pole- or wall-mounting
410 207
410 204
ombra W1-G Terminal box for ombra W8
For housing and connecting sen-sor unit ombra W8
Integrated power supply for sensor unit, combined weather sensor ombra W7-C and wind direction sensor ombra W1-D
Safety class IP65, weatherproof
Material:Polycarbonate
Accessories:1 power supply 24V DC, 2.5A 4 terminal blocks 2.5mm 4 screwed cable glands IP65
Metrics/mounting:(HxWxD) 254x180x90mm
950 205
84 www.spega.com
Specification Order No.Figure Technical data
Slat tracking controller
341 298 CNetwork:TP/FT-10 (FTT10)
Power supply:24V DC, max. 80mA
Equipment:- Display 4x16 characters, backlit- Real-time clock, battery backed- 3 LEDs (red, yellow, green)
Metrics/mounting:(HxWxD) 125 x 125 x 40mmIncludes box for cavity wall or flush-moun-ting or mounting in distribution boards
Available application:SC341298EC: 1 real time clock 1 sun position controller 15 slat tracking controllers 5 facade group ctrl.
ombra BST LON Slat tracking controller
Sun position-dependent positio-ning of slat angles for up to 15 facades or venetian blind types
Supports e.control shadow correction in combination with all e.control sunblind actuators
Integrated processing of telegrams from multiple light sensors (e.g. ombra W8 or ombra W2)
Anti-glare or daylight guidance strategy independently selectable for each group of venetian blinds
Manual positioning of facade groups via user menu
Integrated time clock for time-dependent positioning commands
Password protected user access
Comprehensive plug-in for step-by-step parameterisation
e.controlTM product catalogueAutomation servers and controllers
85
Specifi cation Order No.Figure Technical data
131 020 Csistema RC2LON Application controller
Compact device for different con-trol applications or logic proces-sings
Various software applications available on CD or on request
Network:TP/FT-10 (FTT10)
Power supply:24V DC, max. 40mA
Metrics/mounting:(HxWxD) 85(45) x 35 x 60mmDIN rail mounting
Available applications (selection):131020PW: partition wall controller131020LG: logic controller131020CC: temperature controller with thermal controller
Automation servers and controllers
L-GATEBACnet server
Server for presenting LON network variables and confi guration proper-ties as BACnet server objects
Supports static and dynamic LON network variables plus confi gurati-on properties
Supports BACnet client mapping and alarming, scheduling and trend logging BACnet objects
Confi gurable via LNS plug-in
Network:Port 1 10/100 Base-T (BACnet/IP, LON/IP)Port 2 TP/FT-10 (LON)Port 3 MS/TP (BACnet)
Power supply:9-35V DC, 12-24V AC 50/60Hz max. 4.8 W
Metrics/Mounting:(HxWxD) 90(45) x 104 x 60mmDIN rail mounting
LGATE-900
L-INXOPC XML/DA server
Server for presenting LON network variables and confi guration proper-ties via OPC XML/DA web services
Supports static and dynamic LON network variables and confi gurati-on properties
Supports alarming, scheduling and trend logging
Integrated web server for custom-made visualisation
Versions:L-INX 100 with RNI remote interfaceL-INX 101 with LON/IP router
Network:Port 1 10/100 Base-T (OPC, LON/IP)Port 2 TP/FT-10 (LON)
Power supply:9-35V DC, 12-24V AC 50/60Hz max. 4.8 W
Metrics/Mounting:(HxWxD) 90(45) x 104 x 60mmDIN rail mounting
LINX-100LINX-101
86 www.spega.com
Specifi cation Order No.Figure Technical data
IP Routers and proxy
L-IP 3ECTBLON/IP Router
Routes packets between TP/FT-10 segment and IP networks
Preferably used as LON/IP back-bone router
Build-in web server for admin.and EIA-852 confi guration server
Firmware update and network diagnostics via LSD tool
Protocol analysis via LPA-IP tool
Network:Port 1 10/100 Base-T (Ethernet)Port 2 TP/FT-10
Power supply:9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V
Termination:external for TP/FT segment (p. 87)
Metrics/Mounting:(HxWxD) 90(45) x 104 x 60mmDIN rail mounting
LIP-3ECTB
L-IP 33ECTBLON/IP 2 port router
Routes packets between two TP/FT-10 segments and IP networks
Preferably used as LON/IP back-bone router
Build-in web server for admin.and EIA-852 confi guration server
Firmware update and network diagnostics via LSD tool
Protocol analysis via LPA-IP tool
Network:Port 1 10/100 Base-T (Ethernet)Port 2+3 TP/FT-10
Power supply:9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V
Termination:external for TP/FT segments (p. 87)
Metrics/Mounting:(HxWxD) 90(45) x 104 x 60mmDIN rail mounting
LIP-33ECTB
L-IP 3333ECTBLON/IP 4 port router
Routes packets between four TP/FT-10 segments and IP networks
Preferably used as LON/IP back-bone router
Build-in web server for admin.and EIA-852 confi guration server
Firmware update and network diagnostics via LSD tool
Protocol analysis via LPA-IP tool
Network:Port 1 10/100 Base-T (Ethernet)Port 2-5 TP/FT-10
Power supply:9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V
Termination:external for TP/FT segments (p. 87)
Metrics/Mounting:(HxWxD) 90(45) x 157 x 60mmDIN rail mounting
LIP-3333ECTB
L-PROXYLON Gateway
Gateway for transmitting tele-grams between 3 LON/IP and 2 TP/FT-10 segments
Provides data interchange across domain boundaries and different LNS databases
Proxy functionality by mapping input NV’s to output NV’s (e.g. to overcome alias limitations)
Confi gurable via LNS plug-in
Network:Port 1 10/100 Base-T (LON/IP)Port 2-3 TP/FT-10 (LON/TP)
Power supply:9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V
Metrics/Mounting:(HxWxD) 90(45) x 104 x 60mmDIN rail mounting
LP-33E100
e.controlTM product catalogueNetwork infrastructure
87
Specifi cation Order No.Figure Technical data
RT-33RT-33LON Repeater
Signal amplifi er connecting two TP/FT-10 segments
Separate clamps for power supply and for electromagnetic shielding
Connection via coloured bus clamps
Network:Port 1-2: TP/FT-10
Power supply:24V DC, max. 20mA
Termination:external for TP/FT segments(see below)
Metrics/Mounting:(HxWxD) 85(45) x 53 x 60mmDIN rail mounting
Routers and terminators
LS-33 CBLON 2 port router
Routes packets between two phy-sically separated TP/FT segments
Confi gurable as self-learning switch (plug&play) or confi gured router
Service pin and diagnostic LED
Firmware update and network diagnostics via LSD tool
Network:Port 1-2: TP/FT-10
Power supply:9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V
Termination:external for TP/FT segments(see below)
Metrics/Mounting:(HxWxD) 90(45) x 104 x 60mmDIN rail mounting
LS-33CB
LS-333CBLS-333 CBLON 3 port router
Routes packets between three physically separated TP/FT seg-ments
Confi gurable as self-learning switch (plug&play) or confi gured router
Service pin and diagnostic LED
Firmware update and network diagnostics via LSD tool
Network:Port 1-3: TP/FT-10
Power supply:9-35V DC, 12-24V AC 50/60Hz max. 200mA@24V
Termination:external for TP/FT segments(see below)
Metrics/Mounting:(HxWxD) 90(45) x 157 x 60mmDIN rail mounting
sistema LT-33 / LT-03LON Terminators
Bus termination for TP/FT-10 segments (free topology or line topology)
LT-33 includes 2 termination ele-ments
LT-03 is equipped with RJ45 jack for connecting to NIC interfaces
Versions:LT-33 for 2 TP/FT-10 segments in free or line topologyLT-03 for 1 TP/FT-10 segment in free or line topology, RJ45 jack
Metrics/mounting:(HxWxD) 85(45) x 17 x 60mmDIN rail mounting
100 033
100 003
88 www.spega.com
Specifi cation Order No.Figure Technical data
sistema SV15Power supply 24V DC
Regulated and stabilised power supply for LON devices with 24VDC operating voltage
Rated output current: 1.3A
Short-circuit and overload proof
High effi ciency
Connectable in parallel
100 150
100 250
Voltage:primary 120-230V AC, 50/60Hzsecondary 24V DC
Power:30 W (1.3A secondary)
Metrics/mounting:(HxWxD) 90 x 54 x 55mmDIN rail mounting
sistema SV25Power supply 24V DC
Regulated and stabilised power supply for LON devices with 24VDC operating voltage
Rated output current: 2.5A
Short-circuit and overload proof
High effi ciency
Connectable in parallel
Voltage:primary 120-230V AC, 50/60Hzsecondary 24V DC
Power:60 W (2.5A secondary)
Metrics/mounting:(HxWxD) 90 x 72 x 55mmDIN rail mounting
NIC709-USB
NIC709-IP3E
NIC709-USB100LON Interface for USB
USB interface connecting to LON networks via TP/FT-10
Compatible with LNS applications in high-performance LNS/VNI access mode
Simultaneous operation of LNS applications and LPA or LSD tools
Software driver for Windows 7, Vista, XP and 2000
Network:TP/FT-10 (78kbps)
USB port:full speed USB 1.1
Power supply:via USB port (5V, <130mA)
Metrics:(HxWxD) 23 x 69 x 116mm
NIC709-IP3E100LON Interface for Ethernet
LAN interface connecting to LON networks via TP/FT-10 segments
Compatible with LNS applications in high-performance LNS/VNI access mode
Simultaneous operation of LNS applications and LPA or LSD tools
Software driver for Windows 7, Vista, XP and 2000
Network:TP/FT-10 (78kbps)
Ethernet port:10 Base-T
Power supply:9-35VDC, 12-24VAC 50/60Hz max. 200mA@24V
Metrics/mounting:(HxWxD) 90(45) x 104 x 60mm DIN rail mounting
Power supplies and interfaces
e.controlTM product catalogueNetwork infrastructure and Accessories
89
Specification Order No.Figure Technical data
Accessories
Valve adaptor for clima A24-x
Applicable for all common valve types
Clip-in mounting of actuator
Single traverse
For mounting of sensors ombra W1-D or ombra W1-Wh
Length 0.4m
VA 78VA 26 VA 80VA 50VA 50H
020 325clima A24-T Thermoelectric actuator
Noiseless thermoelectric actuator with optical function indicator
Closed when de-energised
Operating voltage/current:24V AC/DC typ. 80mA, < 250mA on power-on
Travel / force / time / cable length: 4mm / 100N / 120s / 1.0m
020 345 020 346
clima A24-10xx Analogue thermoelectric actuator
Noiseless continuous actuator with optical function indicator
Continuous positioning via 0-10V signal, closed when de-energised
clima A24-10AC for 24V ACclima A24-10DC for 24V DC
Operating current:typ. 80mA, < 250mA on power-on
Travel / force / time / cable length: 4mm / 100N / 120s / 1.0m
Danfoss RAGiacomini Heimeier (M30x1.5)MNG (M30x1.5)MNG hoch (M30x1.5)Others on request
950 208950 209
Cable loom for push buttons
Connects push button switches to e.control flush mounting devices
Contents 50 cables, length 40cm Sorted by colors
910 050
for pole Ø 48-102 mmfor pole Ø 116-200 mm
Double traverse
For mounting of sensors ombra W1-D and ombra W1-Wh
Length 0.8m
950 206950 207
for pole Ø 48-102 mmfor pole Ø 116-200 mm
19“ Mounting set for dialog Web
For mounting dialog Web in 19“ server rack
Including wall power supplyHeight: 1 U
943 00119“ equipment shelf:(HxWxD) 44.5 x 482 x 250mm (1 U)
Wall power plug:Primary: 230V AC, 50HzSecondary: 24V DC, max. 0.5A
90 www.spega.com
Specification Order No.Figure Technical data
ALEX 4.0 Commissioning software
Professional software for system design and commissioning of LON networks
Software runs as local LNS client or as lightweight or fullweight client for remote network access, thus multiple ALEX can access the same LON network concurrently
Integrated browser for monitoring and modifying network variables and configuration properties
Includes device manager for fast collecting, downloading and mana-ging large numbers of LON devices concurrently
Includes product database for de-vice and application management
Auto-backup automatically saves opened project database in back-ground
Includes Open LNS server license(requires no device credits)
Available Languages: English and German
090 042Consisting of: ALEX 4.0 Open LNS server
System requirements: Windows 7, XP, 2000 USB port for license dongle LON network interface for LON TP/FT-10 segment LAN port (10/100 Base-T) for LON/IP or remote access to LNS server
ALEX Commissioning and management software
092 042ALEX Designer Suite Graphical commissioning and management software
Graphical software tool for net-work design and commissioning of e.control automation systems
Integrated function library automa-tically binds and parameterises all e.control automation devices
Room layout and functionality can be changed graphically
Enables device management on mouse-click: test, reset, online, offline, download etc.
Software runs as local LNS client or as lightweight or fullweight client for remote network access
e.control Manager Active X com-ponent grants remote access from SCADA systems or Internet Explorer
Includes ALEX 4.0 softwareIncludes Open LNS server license
(requires no device credits)Available languages: English and
German
Consisting of: ALEX 4.0 e.control Designer e.control Manager Active X comp. Open LNS server
System requirements: Windows 7, XP, 2000 USB port for license dongle LON network interface for LON TP/FT-10 segment LAN port (10/100 Base-T) for LON/IP or remote access to LNS server
e.controlTM product catalogueSoftware
91
Specification Order No.Figure Technical data
OPC Data server, network diagnostics and analysis
LPAProtocol analyser
Logging of all network telegrams in LON TP/XF1250 and TP/FT-10 respectively in LON/IP networks
Works together with all NIC network interfaces, even concurrently to ALEX or IPLONGATE
Allows longtime logging
Network adresses and variables will be interpreted automatically accor-ding to LNS database names
System requirements:Windows 7, Vista, XP, 2000NIC interface orL-Switch, L-IP
LSD Network diagnostic tool
Collects and shows statistical information of LON networks during operation
Works together with all NIC network interfaces, even concurrently to ALEX or IPLONGATE
Diagnostics of complete networks through L-Switch or L-IP routers
Supports teleconfiguration, firmware upload of L-Switch or L-IP routers
LSD-SW
LPA-SW for TP/XF and TP/FTLPA-IP for LON/IP System requirements:Windows 7, Vista, XP, 2000LPA-SW: NIC interfaceLPA-IP: LAN port (10/100 Base-T)
LPA-SW LPA-IP
094 032094 042 094 052
IPLONGATEOPC Data server
High performance data server for connecting LON networks to super-visory control and data acquisition (SCADA) or building management systems (BMS)
Connects to LNS server locally or as lightweight client over TCP/IP networks
OPC® server compliance tested Integrated web server Up to 20 LNS databases, 3,000 LON
devices and 11,900 network variab-les manageable per IPLONGATE
Supports network variables, configu-ration properties and monitor sets
Fast project planning and admini-stration due to full LNS integration
LNS server license not included*Languages: English and German
IPLONGATE openIPLONGATE 150** IPLONGATE 600**
Consisting of: IPLONGATE OPC server
System requirements: Windows 7, Vista, XP, 2000 LNS server USB port for license dongle LON network interface for LON TP/FT-10 segment LAN port (10/100 Base-T) for LON/IP or remote access to LNS server
* Also available with Open LNS server on request. ** Such as IPLONGATE open, but limited to 150 respectively 600 LON network variables (can be upgraded)
General terms and conditions
§ 1 General1. The following terms and conditions of sale and delivery of Spelsberg Gebäu-deautomation GmbH & Co. KG (hereinafter referred to as: spega) apply to all current and – vis-à-vis businessmen regardless of a separate indication in the individual case – also to all future legal transactions unless spega have expressly acknowledged any deviations in writing. Collaterals and subsequent modifications are binding for spega only after written confirmation by spega. The employees of spega are not authorised to make oral agreements which deviate from these General Terms and Conditions.
2. Any conditions of purchase of the ordering party shall be binding only after the express agreement of spega in writing.
§ 2 Offers and scope of supply
1. The offers of spega shall always be subject to change and not binding. The contract comes into force only after the written acknowledgement of order by spega. spega have the right to accept an offer from the ordering party within a period of three weeks.
2. The documents which belong to spega’s offers such as figures, drawings, weight and measurement specifications only identify the subject-matter of the contract and do not constitute an assurance of the properties and features of the contractual item. They contain only approximate information within the scope of the customary commercial tolerance values.
3. spega retain the right of ownership and copyright with regard to drawings and other documents. These drawings and documents may not be made available to third parties and are to be returned forthwith to spega postage paid at spega’s request or in the event of the order not being placed.
4. For the scope of supply, the written order acknowledgement of spega is decisive. Protective devices shall be part of the delivery if and insofar as this has been agreed upon in writing.
5. spega reserve the right to make modifications to the delivery item if this does not impair the usability of the items for the purpose agreed upon, and the agreed cost effectiveness is not modified to the customer’s detriment. Technical improve-ments are always permitted.
§ 3 Prices and payments
1. All prices are net prices. Discounts shall not be granted unless otherwise agreed upon. The prices shall apply “ex works” (spega’s sales office), and exclude packaging and insurance. Bank, discount and debiting charges shall not be borne by spega.
2. The prices shall be calculated on the basis of the prices of materials and wages valid at the time of signing the contract. Should these increase by the time of delivery, spega shall be entitled to invoice correspondingly higher prices as deemed appropriate. This shall not be affected by downpayments and advance payments made by the ordering party.
3. In the absence of any agreement to the contrary, payment shall be made in cash without discount ex appointed payment office of spega, and at the time of invoicing regardless of the time of delivery of the goods (“cash upon invoice”).
4. In the event of payment not being effected on time, spega have the right
a) to demand annual interest in the amount of 5% over the basic interest rate according to §1 of the discount transfer law of 9.6.1998 (Official Federal Gazette I S1242),
b) to immediately assert all claims vis-à-vis the ordering party arising from this or other business transactions, also in cases where individual instalments are not yet due,
c) to retain supplies or other services from this or other transactions until complete fulfilment of all claims which spega is entitled to from this or other orders by the ordering party,
d) to request appropriate security.
spega reserve the right to assert any damage that goes beyond the afore-mentioned.
5. The assertion of rights of retention or set-offs as well as the plea of non-per-formance or poor performance are not possible vis-à-vis spega’s claims unless the counterclaims are legally ascertained, indisputable or acknowledged by spega..
6. In the event of cancellation of orders, the agreed price shall be due and pay-able with immediate effect. However, the costs which spega have saved for the partial work still to be performed until the completion of the ordered parts must be deducted. The remuneration amounts to 30% of the order volume, unless the contracting party proves a smaller damage. spega reserve the right to provide proof of a greater damage.
§ 4 Delivery period and delay in acceptance
1. spega shall do their utmost to meet all delivery dates and deadlines; the delivery dates specified by spega can, however, only be intended for general guidance due to lack of explicit assurance. Delivery shall, however, take place at the latest within 3 weeks of the specified date subject to timely self-delivery.
2. Deadlines begin with the sending of the order acknowledgement, however, not before provision of the final documents and/or approvals to be procured by the ordering party, the clarification of all technical issues as well as before the receipt of an agreed downpayment. Delivery dates shall be deemed observed if the delivery item has left the point of dispatch at spega by the time they expire or notice of readiness for dispatch has been submitted.
3. Delivery and performance dates shall be extended appropriately in case of measures due to labour disputes, in particular in the case of strikes or lock-outs and in the event of occurrence of unforeseeable obstacles if these result in delays in the rendering of services which are not caused by spega or their sup-pliers or sub-suppliers.
4. In the event of default on the part of spega, their obligation to pay damages in the case of slight negligence is restricted to foreseeable damage. Further damages claims apply only if the delay is caused by wilfulness or gross negligence.
5. In case the ordering party falls into arrears with the acceptance of the service, spega without prejudice to further statutory claims are authorised to charge ½% of the invoiced value per month for the costs of storage, however, a maximum of 5% unless the ordering party proves a smaller damage. spega reserve the right to assert a greater damage.
§ 5 Transfer of risk
The risk is transferred to the ordering party the moment the delivery leaves the point of dispatch at spega or the moment it is made available to the ordering party through notice of readiness for dispatch. Dispatch is carried out for account of the ordering party and at the latter’s risk.
§ 6 Partial deliveries
spega are entitled to effect partial deliveries and also premature deliveries after prior information.
§ 7 Reservation of ownership
1. The items delivered by spega remain the property of spega until complete payment of the purchase price including all incidental claims. Furthermore, spega reserve the right of ownership regarding these items up to the complete payment of all existing and future claims from the already existing business relationship or the one brought about by the contract.
2. Processing or alteration of the supplied item shall always be carried out for spega. If the item is processed together with other items which do not belong to spega with the consequence that the item loses its legal independence, spega shall acquire co-ownership for the new item at a ratio of the value of the goods delivered by spega to the other processed goods at the time of processing.
3. If the item is mixed with other items which do not belong to spega, spega shall then acquire the co-ownership for the new item at a ratio of the value of the item delivered by spega to the other mixed item at the time of mixing. If the item of the ordering party is to be seen as the main item, the ordering party shall proportionally transfer the ownership to spega.
4. In case of seizure or other interventions on the part of third parties, the ordering party must inform spega forthwith in writing. The costs of intervention and re-procurement shall in all circumstances be borne by the ordering party.
5. In case of negligent behaviour on the part of the ordering party which is in breach of the contract as well as in the event of justified doubts regarding the creditworthiness, in case of delayed payment, stoppage of payment or institution of insolvency proceedings, spega have the right to ask for the purchased item to be returned or to take it back. This as well as seizure of the reservation item does not imply a termination of the contract unless this would be expressly stipulated by spega. Items which have been taken back can be freely used by spega. The income from such utilisation shall be offset against the remuneration. The ordering party is liable for the claim of preferential creditor.
6. The delivery items are to be treated carefully by the ordering party and must be fully insured by the latter at own expense against fire, water, explosion and other damage. spega must be informed forthwith of the occurrence of any damage.
7. The ordering party is authorised to sell off the goods in the course of a proper business transaction. If the ordering party disposes of the item which is covered by reservation of ownership, it is, however, obliged to preserve such reservation of ownership likewise vis-à-vis third-party purchasers. The ordering party shall assign to spega for the period of the reservation of ownership, from now up to complete redemption of all claims of spega, the claims vis-à-vis its buyer aris-ing from the sale, including all subsidiary rights, regardless of whether the item purchased has been re-sold without or after processing. The ordering party has the right to collect the assigned claim itself, however, this assigned claim must forwarded forthwith to spega. spega can notify third-party purchasers at any time of the assignment.
spega are entitled to revoke the authorisation for further disposal and collection with immediate effect if the ordering party does not fulfil its service obligations towards spega.
8. If the value of the security rights granted to spega through reservation of ownership exceeds the delivery requirements of spega, including subsidiary requirements, by more than 20%, spega shall, at the request of the ordering party, undertake to release any securities in the corresponding amount.
§ 8 Copyright, software license, industrial rights
spega retain the copyright to the software. After complete payment, the ordering party is granted the non-exclusive right of use to the supplied software. Here, the separate license conditions for the relevant software shall apply.
§ 9 Warranty, damages and claims for compensation of expenses
1. If the customer is an entrepreneur, then he must duly fulfil his obligation to examine and give notice of defects according to §377 of the German Commercial Code. Notice of defects must be submitted in writing within 8 working days after receipt of the delivery item at the place of destination or, insofar as these could not be detected during a standard examination, within 8 working days after the detection of such defects. If the customer is a consumer, the obvious defects must be notified within two weeks following hand-over of the goods, non-obvious defects within two months following detection of the defects.
2. Insofar as a service rendered on the part of spega shows a defect, the cause of which was already known at the time of transfer of risk, the customer has the right to post-performance through rectification or post-delivery depending on spega’s choice. The expenses required here shall be borne by spega only if they are not increased because a delivery item was transferred subsequently to a location other than the spega head office, unless this transfer is in accordance with the intended purpose. Replaced goods shall become the property of spega and must be returned to spega.
3. In case of failure to subsequently perform the contractual obligations, the customer has the right, notwithstanding any claims for damages or compensation of expenses according to the present General Terms and Conditions, to choose between either reducing the remuneration or, insofar as the violation of the obliga-tion on the part of spega is considerable, rescinding the contract.
4. Defects in a part of the goods delivered do not entitle the customer to object to the entire delivery, unless the partial deliver is not of any interest to the customer.
5. Warranty claims become statute-barred in 12 months, in business transactions with a consumer in 24 months according to § 13 of the German Civil Code. This does not apply insofar as these claims are based on wilful behaviour attributable to spega or if statutory regulations make longer deadlines mandatory. For replace-ment parts or rectification work, spega shall be liable until the expiry of the period of limitation applicable to the original delivery item.
6. In case of notices of defect, payments of the customer can be retained only to an extent which is appropriate to the defects that have occurred if the claims of the customer are indisputable or legally ascertained. If the notice of defect is unjustified, spega have the right to demand compensation from the customer for the expenses incurred by spega.
7. spega are liable according to the statutory provisions insofar as the customer asserts claims for damages or for compensation of expenses which are caused by wilfulness or gross negligence. Furthermore, spega are liable according to statutory provisions if spega culpably violate an important contractual obligation as well as in cases of injury to life, body or health and insofar as guarantees have been assumed.
8. Damages for the violation of an important contractual obligation are restricted to foreseeable, typical forms of damage insofar as not caused by wilfulness or gross negligence and as long as there is no liability for the injury to life, body or health or due to guarantees assumed. Hence, these claims for damages become statute-barred in 12 months, and in the case of business transactions with a consumer, in 24 months.
9. In all other cases, liability for damages is excluded without taking into account the legal nature of the asserted claim. Thus spega are, in particular, not liable for damage which has not occurred on the delivery item itself, e.g. loss of profit or other damage to the property of the customer or of his buyer.
10. The obligatory provisions of the product liability act shall remain unaffected.
11. Claims for compensation of expenses on the part of the customer are limited to the amount of interest which the customer has in the performance of the contractual obligations.
12. Insofar as the liability of spega is excluded or limited, this also applies to personal liability of the employees, representatives and agents.
§ 10 Impossibility
If spega are unable to render the service expected for reasons attributable to spega, the ordering party has the right to rescind the contract. Damages do not exist unless this impossibility is caused by wilfulness or gross negligence on the part of spega, their representatives or agents. In case of slight negligence, the liability is limited to typical, foreseeable damage, excluding indirect damage. The amount of damages is 10% of the value of the item which cannot be rendered, whereby the ordering party reserves the right to prove a greater damage and spega reserve the right to prove a smaller damage.
§ 11 Industrial rights and copyright
1. In the event that a third party raises justified claims against the ordering party due to the violation of an industrial right or copyright (hereinafter referred to as : industrial right) caused by products supplied by spega and contractually used, spega shall be liable vis-à-vis the ordering party as follows:
a) spega shall, of their own choice, either bring about a right of use for the product, modify the product in such a way that the industrial right is not violated or replace the product. If spega are unable to do so at appropriate conditions, they must take back the product and reimburse the purchase price.
b) The aforementioned obligations of spega only exist if the ordering party notifies spega forthwith in writing about claims asserted by the third party, does not recognise a violation and if spega reserve the right to initiate any defensive measures and conciliation negotiations. If the ordering party stops using the product for reasons of mitigation of damage or other important reasons, the ordering party is obliged to point out to third parties that stopping the use of the product does not imply a recognition of violation of industrial rights.
2. Claims of the ordering party are excluded insofar as the ordering party has to account for the violation of the industrial rights.
3. Claims of the ordering party are furthermore excluded insofar as the violation of industrial rights has been caused by special specifications on the part of the ordering party, by an application which could not be foreseen by spega or because of the fact that the product was modified by the ordering party or used together with products not supplied by spega.
4. All further claims against spega are excluded. However, this does not affect § 12 nor the right of the ordering party to terminate the contract.
§ 12 Liability
1. In all cases of violation of contractual or pre-contractual as well as statutory obligations, spega are liable only where such violation is caused by wilfulness or gross negligence. A product liability applies only if this is made mandatory through statutory regulations. The liability for damage to persons is not affected.
2. Insofar as spega violate a main obligation or an essential contractual obliga-tion due to negligence, spega’s compensation obligation shall be restricted to contractually typical, foreseeable forms of damage.
§ 13 Final provisions
1. Place of performance is Moers; exclusive venue for all legal disputes arising from this legal relationship is Moers. spega, however, have the right to take legal action against the contracting parties at their general venue.
2. The contractual relationship including the delivery conditions shall be judged exclusively according to German law, with the exclusion of the standardised UN Convention of Contracts for the International Sale of Goods, CISG, even if the ordering party has its head office abroad or if the transaction in question is an export transaction.
3. Should individual parts of the afore-described provisions be ineffective, this shall not affect the validity of the remaining delivery conditions. The contracting parties shall undertake to replace an ineffective provision through an effective version which corresponds to its economic purpose.
92 www.spega.com
e.controlTM catalogueGeneral terms and conditions
spelsberggebäudeautomation gmbhzechenstr . 7047443 moers germanyfon: +49 (2841) 88049-0fax: +49 (2841) 88049-49e-mail: info@spega .cominternet: www .spega .com
Your local spega partner: