XTWG10, 17, 30

XTWG50

_Constructed with high strength and abrasion resistant materials.

_All pin holes are heat treated.

_Equipped with a stop bar for stability during maintenance.

_Internal hoses protected from environment.

_360 hydraulic motor rotation and reverse mode.

_Wide range of models to fit your excavator.

SPECIFICATIONS

XTWG600, 1000, 1500, 2000

PENDULUM TYPE

FIXED TYPE

The above specification may be changed without prior notice for product improvement.

XTWG10 XTWG17 XTWG30 XTWG50 XTWG600 XTWG800 XTWG1000 XTWG1500 XTWGB2000lb 229.28 297.62 555.56 705.48 1984.16 2866.01 3747.86 4409.25 5403.53kg 104.00 135.00 252.00 320.00 900.00 1300.00 1700.00 2000.00 2451.00

inch 0.00 0.00 0.00 0.00 11.02 12.20 13.39 22.28 27.76mm 280.00 310.00 340.00 566.00 705.00inch 31.50 37.01 46.06 50.39 67.28 68.90 74.02 88.58 102.36mm 800.00 940.00 1170.00 1280.00 1709.00 1750.00 1880.00 2250.00 2600.00inch 33.07 37.01 48.03 41.34 46.26 48.98 53.94 72.68 79.13mm 840.00 940.00 1220.00 1050.00 1175.00 1244.00 1370.00 1846.00 2010.00inch 38.98 43.70 55.91 33.46 29.17 30.63 49.68 61.02 67.72mm 990.00 1110.00 1420.00 850.00 741.00 778.00 1262.00 1550.00 1720.00psi 2417.97 2986.90 2986.90 3342.49

kgf/ 170.00 210.00 210.00 235.00psi 0.00 0.00 0.00 0.00

kgf/ - - - -

Lbs 1800-3300 3808-4480 6720-8960 11020-20160 26450-39680 39680-55110 61730-77161 79370-92600 94800-Ton 0.8-1 1.7-2 3-4 5-9 12~18 18~25 28~35 36~42 43~47

Motor Drain piping installation Semi-Automatic

If installing : 1991 psi / 140 kgf/If not installing : 1422 psi/ 100 kgf/

Recommended Carrier Weight

Open & Close Pressure

3555-4552

250-320

RotatorPressure

1422-1991

100-140

WEIGHT

MIN

MAX

H

H1