Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
1214.3747.81
130.055.12
607.1923.91
304.8012.00
304.8012.00
65.022.56
DESIGNED FOR 3/8" HARDWARE
19.05.75
SPECIFICATIONS:
MATERIAL: 316L STAINLESS STEEL
WEDGE WIRE PROFILE: 5MM X 5MM WITH 4.92MM GAP
RATED FOR LOAD CLASS B; LIGHT VEHICLE
DESIGN LOAD RATING: 28,101 LBS PER FT. (125kn)
DISCLAIMER - The customer and the customer’s architects, engineers, consultants, and other professionals are completelyresponsible for the selection installation and maintenance of any product purchased from Trench Drain Systems and/or its manufacturers. TRENCH DRAIN SYSTEMS MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE SUITABILITY, DESIGN, MERCHANTIBILITY, OR FITNESS OF THE PRODUCT FOR CUSTOMERS APPLICATION. The drawing and information provided remain the property and copyright of the manufacturer listed. The manufacturer reserves the right to modify specification without notice.
POLYCAST
SS600
SS500
A A
B B
4
4
3
3
2
2
1
1
DO NOT SCALE DRAWING
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
BSIZE
DESCRIPTION:
DATE: 4.26.19CHECKED: NA
DRAWN: CJP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHESTOLERANCES:ANGULAR: MACH BEND ONE PLACE DECIMALTWO PLACE DECIMAL THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFTRENCH DRAIN SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFTRENCH DRAIN SYSTEMS IS PROHIBITED.
PART NO.
TRENCH DRAIN SYSTEMS PO BOX 377
FREMONT, OH 43420610-638-1221
www.TrenchDrain.com
SPECIFICATION SHEET GRATE WEDGE WIRE 316SS CLASS B 5.25 X 48.00 WITH LOCKING DEVICE
SHEET OFWEIGHT:SCALE: 1 11:8
DG0655 A
604.7723.81
130.055.12
302.3911.91
65.022.56
DESIGNED FOR3/8" HARDWARE
19.05.75
SPECIFICATIONS:
MATERIAL: 316L STAINLESS STEEL
WEDGE WIRE PROFILE: 5MM X 5MM WITH 4.92MM GAP
RATED FOR LOAD CLASS B; LIGHT VEHICLE
DESIGN LOAD RATING: 28,101 LBS PER FT. (125kn)
DISCLAIMER - The customer and the customer’s architects, engineers, consultants, and other professionals are completelyresponsible for the selection installation and maintenance of any product purchased from Trench Drain Systems and/or its manufacturers. TRENCH DRAIN SYSTEMS MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE SUITABILITY, DESIGN, MERCHANTIBILITY, OR FITNESS OF THE PRODUCT FOR CUSTOMERS APPLICATION. The drawing and information provided remain the property and copyright of the manufacturer listed. The manufacturer reserves the right to modify specification without notice.
SS500
SS600
POLYCAST
A A
B B
4
4
3
3
2
2
1
1
DO NOT SCALE DRAWING
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
BSIZE
DESCRIPTION:
DATE: 4.26.19CHECKED: NA
DRAWN: CJP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHESTOLERANCES:ANGULAR: MACH BEND ONE PLACE DECIMALTWO PLACE DECIMAL THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFTRENCH DRAIN SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFTRENCH DRAIN SYSTEMS IS PROHIBITED.
PART NO.
TRENCH DRAIN SYSTEMS PO BOX 377
FREMONT, OH 43420610-638-1221
www.TrenchDrain.com
SPECIFICATION SHEET GRATE WEDGE WIRE 316SS CLASS B 5.25 X 24.00 W/LOCKING DEVICE
SHEET OFWEIGHT:SCALE: 1 11:8
DG0655H A
604.7723.81
130.055.12
19.05.75
SPECIFICATIONS:
MATERIAL: 316L STAINLESS STEEL
WEDGE WIRE PROFILE: 5MM X 5MM WITH 4.92MM GAP
RATED FOR LOAD CLASS B; LIGHT VEHICLE
DESIGN LOAD RATING: 28,101 LBS PER FT. (125kn)
DISCLAIMER - The customer and the customer’s architects, engineers, consultants, and other professionals are completelyresponsible for the selection installation and maintenance of any product purchased from Trench Drain Systems and/or its manufacturers. TRENCH DRAIN SYSTEMS MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE SUITABILITY, DESIGN, MERCHANTIBILITY, OR FITNESS OF THE PRODUCT FOR CUSTOMERS APPLICATION. The drawing and information provided remain the property and copyright of the manufacturer listed. The manufacturer reserves the right to modify specification without notice.
SS500
SS600POLYCAST
A A
B B
4
4
3
3
2
2
1
1
DO NOT SCALE DRAWING
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
BSIZE
DESCRIPTION:
DATE: 4.26.19CHECKED: NA
DRAWN: CJP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHESTOLERANCES:ANGULAR: MACH BEND ONE PLACE DECIMALTWO PLACE DECIMAL THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFTRENCH DRAIN SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFTRENCH DRAIN SYSTEMS IS PROHIBITED.
PART NO.
TRENCH DRAIN SYSTEMS PO BOX 377
FREMONT, OH 43420610-638-1221
www.TrenchDrain.com
SPECIFICATION SHEET GRATE WEDGE WIRE 316SS CLASS B 5.25 X 24.00 WITHOUT LOCKING DEVICE
SHEET OFWEIGHT:SCALE: 1 11:8
DG0655H-SPA C
1214.3747.81
130.055.12
607.1923.91
304.8012.00
304.8012.00
65.022.56
19.05.75
SPECIFICATIONS:
MATERIAL: 316L STAINLESS STEEL
WEDGE WIRE PROFILE: 5MM X 5MM WITH 4.92MM GAP
RATED FOR LOAD CLASS D; PNEUMATIC FORKLIFT
DESIGN LOAD RATING: 89,924 LBS PER FT. (400kn)
DISCLAIMER - The customer and the customer’s architects, engineers, consultants, and other professionals are completelyresponsible for the selection installation and maintenance of any product purchased from Trench Drain Systems and/or its manufacturers. TRENCH DRAIN SYSTEMS MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE SUITABILITY, DESIGN, MERCHANTIBILITY, OR FITNESS OF THE PRODUCT FOR CUSTOMERS APPLICATION. The drawing and information provided remain the property and copyright of the manufacturer listed. The manufacturer reserves the right to modify specification without notice.
POLYCAST
SS600
SS500
A A
B B
4
4
3
3
2
2
1
1
DO NOT SCALE DRAWING
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
BSIZE
DESCRIPTION:
DATE: 4.26.19CHECKED: NA
DRAWN: CJP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHESTOLERANCES:ANGULAR: MACH BEND ONE PLACE DECIMALTWO PLACE DECIMAL THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFTRENCH DRAIN SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFTRENCH DRAIN SYSTEMS IS PROHIBITED.
PART NO.
TRENCH DRAIN SYSTEMS PO BOX 377
FREMONT, OH 43420610-638-1221
www.TrenchDrain.com
SPECIFCIATION SHEET GRATE WEDGE WIRE 316SS CLASS D 5.25 X 48.00 WITH LOCKING DEVICE
SHEET OFWEIGHT:SCALE: 1 11:8
DG0655R A
604.7723.81
130.055.12
302.3911.91
65.022.56
DESIGNED FOR 3/8" HARDWARE
19.05.75
SPECIFICATIONS:
MATERIAL: 316L STAINLESS STEEL
WEDGE WIRE PROFILE: 5MM X 5MM WITH 4.92MM GAP
RATED FOR LOAD CLASS D; PNEUMATIC FORKLIFT
DESIGN LOAD RATING: 89,924 LBS PER FT. (400kn)
DISCLAIMER - The customer and the customer’s architects, engineers, consultants, and other professionals are completelyresponsible for the selection installation and maintenance of any product purchased from Trench Drain Systems and/or its manufacturers. TRENCH DRAIN SYSTEMS MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE SUITABILITY, DESIGN, MERCHANTIBILITY, OR FITNESS OF THE PRODUCT FOR CUSTOMERS APPLICATION. The drawing and information provided remain the property and copyright of the manufacturer listed. The manufacturer reserves the right to modify specification without notice.
SS500
SS600
POLYCAST
A A
B B
4
4
3
3
2
2
1
1
DO NOT SCALE DRAWING
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
BSIZE
DESCRIPTION:
DATE: 4.26.19CHECKED: NA
DRAWN: CJP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHESTOLERANCES:ANGULAR: MACH BEND ONE PLACE DECIMALTWO PLACE DECIMAL THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFTRENCH DRAIN SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFTRENCH DRAIN SYSTEMS IS PROHIBITED.
PART NO.
TRENCH DRAIN SYSTEMS PO BOX 377
FREMONT, OH 43420610-638-1221
www.TrenchDrain.com
SPECIFICATION SHEET GRATE WEDGE WIRE 316SS CLASS D 5.25 X 24.00 W/LOCKING DEVICE
SHEET OFWEIGHT:SCALE: 1 11:8
DG0655RH A
1214.3747.81
130.055.12
19.05.75
SPECIFICATIONS:
MATERIAL: 316L STAINLESS STEEL
WEDGE WIRE PROFILE: 5MM X 5MM WITH 4.92MM GAP
RATED FOR LOAD CLASS B; LIGHT VEHICLE
DESIGN LOAD RATING: 28,101 LBS PER FT. (125kn)
DISCLAIMER - The customer and the customer’s architects, engineers, consultants, and other professionals are completelyresponsible for the selection installation and maintenance of any product purchased from Trench Drain Systems and/or its manufacturers. TRENCH DRAIN SYSTEMS MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE SUITABILITY, DESIGN, MERCHANTIBILITY, OR FITNESS OF THE PRODUCT FOR CUSTOMERS APPLICATION. The drawing and information provided remain the property and copyright of the manufacturer listed. The manufacturer reserves the right to modify specification without notice.
SS500
SS600
POLYCAST
A A
B B
4
4
3
3
2
2
1
1
DO NOT SCALE DRAWING
UNLESS OTHERWISE SPECIFIED:
REVDWG. NO.
BSIZE
DESCRIPTION:
DATE: 4.26.19CHECKED: NA
DRAWN: CJP
FINISH
MATERIAL
DIMENSIONS ARE IN INCHESTOLERANCES:ANGULAR: MACH BEND ONE PLACE DECIMALTWO PLACE DECIMAL THREE PLACE DECIMAL
APPLICATION
USED ONNEXT ASSY
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFTRENCH DRAIN SYSTEMS. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFTRENCH DRAIN SYSTEMS IS PROHIBITED.
PART NO.
TRENCH DRAIN SYSTEMS PO BOX 377
FREMONT, OH 43420610-638-1221
www.TrenchDrain.com
SPECIFICATION SHEET GRATE WEDGE WIRE 316SS CLASS B 5.25 X 48.00 WITHOUT LOCKING DEVICE
SHEET OFWEIGHT:SCALE: 1 11:8
DG0655-SPA A
DELIVERY TRUCK
CDIN LOAD
CLASS
TDS-434-2018
ø1/2 THRU WITH ø1-1/16” x 7/16” DEEP C’BORE
23-13/16”
11-29/32”
2-9/16”
5-1/8”
3/4”
5/16”
PATRIOTThe
Grate
www.TrenchDrain.com
PO Box 377 • Fremont, OH 43420 • USA
(610) 638-1221
DG0692Ductile Iron Decorative Grate
Material: ASTM A536 GR.65-45-12 DUCTILE IRON
Paint: FLAT BLACK
Open Area: 26in2 (21%)
Load: DIN Class C
ADA Compliant
ADA Compliant
Description
Ayos® ""C" OU" SYSHMS
_._ ____ _ 47X 9/32
• • • • • ♦ • • • • ♦ • • • • • • • • • • • ♦ • ♦ • • • • • • • • • • • ♦ • • • • ♦ • • • • • ♦
917 /16 THRU HOLE W /913/ 4 COUNTERSINK X 5/16 DEEP (2 PLACES)
J_:::::==========================================::J 3/4 J
OSN
.NQIE.S_;
1. MATERIAL: HOT DIPPED GALVANIZED14 GAUGE ASTM A36 STEEL OR EQUIVALENT.2. THIS GRATE HAS 20% (41 IN2) OF OPEN AREA.3. THIS GRATE IS RATED FOR APPLICATION
LOAD CLASS B.ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED
BY DA.TE: LOC
�l�bt�N��T;,°'."'��L I/·.,�� OR HQ 865 986-9726 $
REV B
S/08 .JOB NUMBER ORA.WINO NUMBER
89281 SHEET 1 OF 1 DG064O
www.TrenchDrain.com
PO Box 377 • Fremont, OH 43420 • USA
(610) 638-1221
PROJECT ID/ PDIIICL'u: DG0641S CONTRACT NO: __________ _
600 Series Ductile Iron Solid LOCATION: ____________ _
ENGINEERING SPECIFICATION: POL YCASTII) DG0641 S is appropriate for many general use conditions. Gratihg locking device Part No. DA0642B (not shown) should l:ie used and maintained secure. The grate has 39% (40in2) of open area. The grate is made of ASTM A536 GR. 65-45-12 (ductile iron) and weighs approximately 18lbs [8.16kg]. The grate is only available in a 24" [610mm) length. The grate meets Load Class D when used alone in a 600 Series channel. If grate is used in conjunction with a DG0970 frame It meets Load Class F, a DG0700AA frame then meets Load Class F and a DG0700PE Frame it meets Load Class E.
� 5 3/16"
(132mm]
23 7/8" ------- ---------i (606 mm J
_L_�--------�
STANDARD CHECKERED TOP DESIGN TYPE-C
7/16 [11mm) X 1 7/16 (37mm} FULL RADIUS THRU SLOT WI 1 1/16 [27mm] X 2 1/16 [52mm] X 5/16 [8mm] DEEP FULL RADIUS RECESS
_L_,-------------, 3/4" J
[19mm]
� □ □ □ � □ □ □ □ □
Frame Options (Select One) Grate Type Part No. Load Class DURAGUARD° Composite Frame DG0700PE Class E HARDNOSE Iron Frame DG0700M Class F Iron Frame (w/4 -ancho!lng rods) DG0970 Class F
Options (Select All That Apply) Part No. Addltlonal Specifications: HARDNOSE Looking DevlllE> DA06428 DURAGUARD" Locl<J119 De\'ICe DA0642BH Stalnless Slaet Lockl119 Device DA0642BHS Locklny Device DA0942 St.alnless Slaet Loc!\1119 Device DA0942S
APPLICATION LOAD CLASS D: Highway vehicles, commercial aircraft and low to moderate speeds (parking areas, driveways and warehouses), Designed for a distributed pressure of 450psi (64,800psf). ADA compliant for accessible routes.
MEETS THE FOLLOWING STANDARDS & SPECIFICATIONS: • Federal Aviation Administration (FAA) Advisory Circular
Airport Pavement Design and Evaluation (AC 150/5320-60Appendix 3 Design of Structures for Heavy Aircraft)
• MSHTO Highway Drainage Guidelines• AASHTO Standard Specification for Highway Bridges
PC-t3 10/22/2008
PROJECT ID/ PDIIICL'u' DG0644
° CONTRACT NO: ___________ _
600 Series Fiberglass LOCATION: ____________ _
ENGINEERING SPECIFICATION: POL YCAS� DG0644 Grate is designed for use with POL YCAST� Vinyl Ester trench in areas requiring extreme chemical resistance. The clear opening between the bars is 5/8" [16mm]. Grating locking device Part No. DA0642F (not shown) should be used and maintained secure. The grate has 46% (114 in2) of open area. The grate weighs approximately Slbs [2.27kg] and is available in both 24" [610mm] and 48" [1219mm] lengths.
LI ___ ___,/\ ___ 23 7/8" - 47 13/16" _____ ____,_.· V [606mm -1214mm]
7t-[1�!�1 5 3/16"
[132mm]
I II 1t4" -11-[6mm]
�}u=a===== 3/4" J [19mm]
APPLICATION LOAD CLASS C: Pneumatic tire vehicles, highway vehicles and low to moderate speeds (parking areas and driveways). Designed for a distributed pressure of 260psl (37,440psf).
I e e I
PC-52 12/4/2008
PROJECT ID/ PDIIICL'u' DG0644SP
0 CONTRACT NO: ___________ _
600 Series Fiberglass LOCATION: ____________ _
ENGINEERING SPECIFICATION: POL YCASTG> DG0644SP Grate is designed for use with POL YCAST® Vinyl Ester trench in areas requiring extreme chemical resistance. The clear opening between the bars is 3/8" [10mm]. Grating locking device Part No. DA0642F (not shown) should be used and maintained secure. The grate has 39% (96 in2) of open area. The grate weighs approximately 6lbs [2. 72kg) and is available in both 24" [610mm] and 48" [1219mm] lengths.
LI ___ ___,/\ ___ 23 7/8" - 47 13/16" _____ ____,_.· V [606mm -1214mm] 3/8" 7t-[10mm]
5 3/16" [132mm]
I II 114" -11-[6mm]
I =======!�3/4" J [19mm]
APPLICATION LOAD CLASS C: Pneumatic tire vehicles, highway vehicles and low to moderate speeds (parking areas and driveways). Designed for a distributed pressure of 260psl (37,440psf).
I e e I
PC-53 12/4/2008
PROJECT ID/ PDIIICL'u: DG0645 CONTRACT NO: __________ _
600 Series Galvanized Steel Solid LOCATION: ____________ _
ENGINEERING SPECIFICATION: POL YCAST® DG0645 Grate is designed for pipe runs, e.g. secondary containment or cable runs. Removable cover allows full access. Grating locl<ing device Part No. DA0642 (not shown) should be used and maintained secure. The grate weighs approximately 8Ibs [3.6kg] and is available in both 24" [610mm] and 48ff [1219mm] lengths.
5 3/16" [132mm]
t 0,
07/16 [11mm] THRU HOLE W/03/4 [19mm] COUNTERSINK X 6/16 [8mm] DEEP 2 PLACES
� .......-_,.____---t--� 3/4" J
[19mm)
.u. APPUCA TION LOAD CL.ASS A: Pedestrian, bicycles and golf carts. Designed for a distributed pressure of 2psi {300psf). ADA compliant for accessible routes. Meets ASTM C-857.
L to J
PC-54 12/4/2008
PROJECT ID/ PDIIICL'u: DG0647 CONTRACT NO: ___________ _
600 Series Stainless Steel Slotted LOCATION: ____________ _
ENGINEERING SPECIFICATION: POLYCAST® DG0647 Grate is designed for use where sanitary conditions are essential. Grating locking device Part No. DA0642S (not shown) should be used and maintained secure. The grate has 20% (41in2) of open area. The grate is made 14 gauge GR. 304 Stainless Steel and weighs approximately 8Ibs [3.63kg]. The grate is available in both 24" [610mm] and 48" [1219mm] lengths.
r __ _,/\ ___ 23 7/8"-47 13/16" -------. V [606mm -1214mm]
47X 1/4" [7mm]
47X 3" [76mm]
07/16 [11mm] THRU HOLE W/03/4 [19mm] COUNTERSINK X 5/16 [8mm] DEEP 2 PLACES
J__�-------1 >--------�
3/4" j [19mm]
APPLICATION LOAD CLASS B: Automobiles, light pickup trucks, general aviation aircraft, and low speeds (parking areas and driveways). Designed for a distributed pressure of 62psi (9,000psf).
)
c==----'")
PC-46 10/22/2008
PROJECT ID/ PDIIICL'u: DG0667 CONTRACT NO: __________ _
600 Series Stainless Steel Solid LOCATION: ____________ _
ENGINEERING SPECIFICATION: POL YCAST® DG0667 Grate is designed for pipe runs, e.g. secondary containment or cable runs. Especially suited for areas exposed to mild acids or bases. Removable cover allows full access. Grating locking device Part No. OA0642S (not shown) should be used and maintained secure. The grate weighs approximately 8Ibs [3.6kg] and is available in both 24" [610mm] and 48" [1219mm] lengths.
5 3/16" [132mm]
t 0,
07/16 [11mm] THRU HOLE W/03/4 (19mm] COUNTERSINK X 6/16 [8mm] DEEP 2 PLACES
� .......-_,.____---t--� 3/4" J
[19mm]
.u. APPUCA TION LOAD CL.ASS A: Pedestrian, bicycles and golf carts. Designed for a distributed pressure of 2psi (300psf). ADA compliant for accessible routes. Meets ASTM C-857.
L to J
PC-55 12/4/2008
PROJECT ID/ PDIIICL'u' DG0675HD • CONTRACT NO: __________ _
600 Series Ductile Iron Longitudinally Slotted LOCATION: ____________ _
ENGINEERING SPECIFICATION: POL YCAST® DG0675HD is appropriate for many general use conditions. Grating locking device Part No. DA0642B (not shown) should be used and maintained secure. The grate has 26% (32in2) of open area. The grate is made of ASTM A536 GR. 65-4�12 (ductile iron) and weighs approximately 15Ibs [6.80kg). The grate Is only available In a 24" [610mm] length. The grate meets Load Class D when used alone in a 600 Series channel. If grate is used in conjunction with a DG0970 frameit meets Load Class F. a DG0700AA frame then meets Load Class F and a DG0700PE Frame It meets Load Class E.
-r 5 3/16"
[132mm] _L_
.P O ,L
23 7/8" (606mm] -------i
C' A S ,. o e o 6 ---, -6 H D
� D D D
.,/ D D D D D
[( 6X 5/'16"]
[8mm)
\_ 01/2 [13mm) THRU W/01 1/16 [27cnm) X 5/16 [8mm) DEEP COUNTERBORE
frame Options (Select One) Grate Type Part No, Load Class OURAGUARo' ComPQSile Frame OG0700PE Class E HARONOSE Iron Frame OG0700M Class F Iron Frame (w/4 an�horing rods) OG0970 Class'F
Options (Select All That Apply) Part t<lo. Addltlonal Speclflcatlo_ns: HARONOSE Locking Device OA06428 OURAGUARD
0 Locking Device OA0642BH
Stainless Steel Locking Device OA0642BHS locking Device OA0942 Stainless Steel Lor.king Device OA0942S
APPLICATION LOAD CLASS D: Highway vehicles, commercial aircraft and low to moderate speeds (parking areas, driveways and warehouses� Designed for a distributed pressure of 450psi (64,800psf). ADA compliant for accessible routes.
MEETS THE FOLLOWING STANDARDS & SPECIFICATIONS: • Federal Aviation Administration (FAA) Advisory Circular
Airport Pavement Design and Evaluation (AC 150/5320-60Appendix 3 Design of Structures for Heavy Aircraft)
• AASHTO Highway Drainage Guidelines• AASHTO Standard Specification for Highway Bridges)
�7 �
PC-51 10/22/2008