STORE MORE GARDEN BUILDINGS SPECIFICATIONS

Innovative design with fewer parts. Quicker assembly. Heaviest gauge, hot dipped galvanised steel in this category. Tallest wall height. Ventilated gables. Minimal maintenance required; rot and rodent proof. 10 year non-perforation warranty.

Type Base Dimen- Roof Dimensions Wall Height cm

Overall Height cm

Door Opening

(Front x Sides (Front x Side cm) (Height x Width cm)

Lotus 63 HG 171 x 82 184 x 92 178 193 170 x 63

Lotus 65 HG/SG/MG 171 x 144 184 x 154 178 193 170 x 63

Lotus 68 HG 171 x 237 184 x 247 178 193 170 x 63

Lotus 83 HG 234 x 82 245 x 92 178 198 170 x 105

Lotus 85 HG 234 x 144 245 x 154 178 198 170 x 105

Lotus 86 HG/SG/MG 234 x 175 245 x 185 178 198 170 x 105

Lotus 88 HG 234 x 237 245 x 247 178 198 170 x 105

Lotus 106 HG 295 x 175 307 x 185 178 202 170 x 105

Lotus 108 HG/SG/MG 295 x 237 307 x 247 178 202 170 x 105

Lotus 1012 HG/SG/MG 295 x 361 307 x 371 178 202 170 x 105

Lotus Pent 5x3 HG/SG 140 x 82 148 x 93 178 198 170 x 59

Lotus Pent 6x3 HG/SG 171 x 82 180 x 93 178 198 170 x 63

Lotus Pent 6x4 HG/SG 171 x 113 180 x 124 178 198 170 x 63

Lotus Pent 8x3 HG/SG 234 x 82 242 x 93 178 198 170 x 105

Lotus Pent 8x4 HG/SG 234 x 113 242 x 124 178 198 170 x 105

Lotus Pent 8x4 HG/SG 234 x 113 242 x 124 178 198 170 x 105

Lotus-Lean– To 46 HG 113 x 171 124 x 180 178 198 172 x 67

Lotus-Lean-To 48 HG 113 x 234 124 x 242 178 198 172 x 67

Lotus-Lean-To 58 HG 144 x 234 155 x 242 178 203 172 x 67

Lotus-Low-Pent HG 171 x 113 180 x 124 123 124 114 x 63

SPECIFICATIONS OF STEEL USED IN THE GABLE

Thickness (Heritage Green) 0.34mm Base Metal Thickness 0.30mm

Thickness (Mist Green)

Thickness (Slate Grey) 0.33mm Base Metal Thickness 0.30mm

Tensile 400Mpa 400Mpa

Coating 180g Zinc coating / m2 180g Zinc coating / m2

Paint Outside 16 um Primer + 39um topcoat

Paint Inside 16 um Primer + 20um topcoat

Galvanised Steel Material: Base Frame

Thickness 0.5mm Base Metal Thickness

Tensile 360 Mild Steel

Coating 202 202g Zinc coating / m2

STORE MORE GARDEN BUILDINGS LIMITED Edward Merton House, Park Gate Close, Bredbury Parkway, Bredbury Industrial Park,

Bredbury, Stockport SK6 2SN Tel. 0161 430 3347

“Designed with strength and simplicity”

THE LOTUS RANGE

THE LOTUS APEX SHED

THE LOTUS PENT SHED

THE LOTUS LEAN–TO SHED

Heritage Green (HG) 5x3, 6x3, 6x4, 8x3, 8x4 Slate Grey (SG) 5x3, 6x3, 6x4, 8x3, 8x4

Heritage Green (HG) 4x6, 4x8, 5x8

Heritage Green (HG) 6x3, 6x5, 6x8, 8x3,8x5, 8x6, 8x8, 10x6,10x8, 10x12 Mist Green (MG) 6x5, 8x6, 10x8, 10x12 Slate Grey (SG)6x5,8x6,10x8,10x12

6

3 5

8

8

3 5

6 8

10 6

8 12

6

3 4

5

3

8

3 4

6 8

4 5

8

6

OPTIONAL ACCESSORIES

Wooden Floor Kit: Comprises fully pressure impregnated tongued & grooved boards and bearers. Nails included for assembly, plus screws to fix the shed base rail to the top surface of the floor. Foundation Kit is not required with this prod-uct option.

Anchor Screw Fixing Kit: Fits through pre-drilled holes in the base rail. Kit supplied complete with masonry drill bit. Used to secure a shed to an existing concrete or slab base. Screws are cross slot headed to enable removal later if required.

Foundation Kit: Comprises galvanised steel channels which assemble to give a foundation area. This should later be filled with concrete after first inserting a plastic sheet below to prevent dampness rising. Wooden Floor kit is not required with this product option.

Skylight: Translucent roof sheet available to permit daylight to the shed interior. Replaces one full width roof panel. Fits all apex roofed sheds only.

Optional window in Cream. Kit supplied with cut-down wall panel (in shed colour). Only available on certain models (please enquire for details).

Free Standing Shelves: Approximately 168 H x 110 W shelving kit can be supplied (please enquire for details).

THE LOTUS LOW PENT SHED

Heritage Green (HG) 6x4