Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
● Network intercom system connectable with IP network● Available to connect LAN or WAN● System configuration is flexble● Max. 1,280 stations connectable● Centralized control with a personal computer● System maintenance (verifying operation log and line supervision) also performable with a personal computer and internet browser● Connectable the PBX exchange● Available to control electronic lock system, CCTV surveillance system, etc. using input/output contact
Network Intercom SystemAN-8000 Series
SPECIFICATIONS
AN-8000EX AN-8000MI
(CE): 24W(max.), (CU): 21W(max.)―
―
―
―
Input: 2, max. 0dB*1, under 600Ω, balancedControl: 2, no-voltage make contact input, open voltage: 12V DC,
short-circuit current: 10mAOutput: 2, max. 0 dB*1, under 600Ω, balanced
Control: 2, relay contact output, contact capacity: 24V DC/0.5A16 inputs, no-voltage make contact input, open voltage;
12V DC, short-circuit current: under 10 mA16 outputs, relay contact output, contact capacity 24V DC/0.5A
PBX input and output: 2 channels, under 0 dB*2, avarage:under-15dB*2, 600Ω, balanced
2.8kg
Model No. Power Source Power Consumption Speech Link Hands-free Speech Method
Line capacity Paging Output Audio Input
Audio Output
Contact Input
Contact Output PBX I/F
Network Section Network I/F Network Protocol Audio Packet Transmission System Connector Audio Delay TimeFinish Weight
Model No.
Power Source Power Consumption Speech Method Audio Frequency RangeWiring Method Wiring distance LCD Display
Dial-in Contact Output
Line Connecting Terminal Headset Terminal
External Speaker Terminal Installation Method
Dust/Water Protection Finish Weight
Model No.
Power Source Power Consumption Speech Method Audio Frequency Range Wiring Method Wiring distance LCD Display
Dial-in Contact Output Headset Terminal
External Speaker Terminal Network Section Network I/F Network Protocol Audio Packet Transmission System Connector Audio Delay TimeInstallation Method Dust/Water Protection Finish
Weight
AN-8000EX(CE)/AN-8000MI(CE): 230V AC, 50/60Hz. AN-8000EX(CU)/AN-8000MI(CU): 120V AC, 50/60Hz 75W (max.)
Internal: 4, External: 8 (both Half duplex/Full duplex use)Simultaneous conversation by way of echo canceller or Half duplex
conversation by way of voice switchUp to 16 stations
Audio: 2 channels, max. 0dB*1, 600Ω, balancedControl: 2 channels, no-voltage make contact output (24V DC/0.5A)
―
―
―
―
―
4.2kg
48V DC (supplied from AN-8000EX) 2.4W (max.)
300 - 7,000Hz Non-polar one pair stranded wire system
Max. 1,500m(φ0.65mm, loop resistance 170Ω or less)
RJ11 modular jack
10BASE-T/100BASE-TX (automatic switching) TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Unicast (simultaneous paging to up to 16 zones) Multicast (simultaneous paging to up to 79 zones)
RJ45 connector 80ms, 320ms (switchable on the software) Pre-coated steel plate, black , 30% gloss
Hands-free or handset Hands-free Hands-free or handset
Alphanumeric characters (16 characters x 2 lines)
―
Speaker: 3 mW, 32Ω,Microphone:-49dB*1
0.6W, 8Ω
―
800g
Desk-top/surface(use YC-280)
Body, Handset: ABS resin, black
48V DC (supplied from AN-8000EX) 2.4W (max.)
Non-polar one pair stranded wire system Max. 1,500m(φ0.65mm, loop resistance 170Ω or less)
Flush/surface
Power supply device complies with IEEE802.3af standard or 12V DC 6W(max.)
Desk-top/surface (use YC-290)
―Body: ABS resin, black
400g700g
Open collector output (polarized), withstand voltage: max. 30V DC,
control current: max. 50mA
―
0.6W, 8ΩDesk-top/surface
(use YC-280)IP54
Body, Handset: ABS resin, gray1000g
AN-8000MS AN-8010MS AN-8011MS AN-8020MS
AN-8031MS AN-8050DS AN-8500MS AN-8540DS
Hands-free or handset
― ―
Alphanumeric characters (16 characters x 2 lines)
―Speaker: 3 mW, 32Ω,
Microphone:-49dB*1, 3.5mm mini jack0.6W, 8Ω ―
10BASE-T/100BASE-TX (Automatic switching) TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Unicast (1speech link, simultaneous paging to up to 16 zones) Multicast (simultaneous paging to up to 79 zones)
LAN: RJ45 connector (PoE compatible) PC: RJ45 connector (not-compatible with PoE)
80ms, 320ms (switchable on the software)
300 - 7,000Hz
Hands-free ― ―
Desk-top/surface(use YC-280)―
Panel: Stainless steel (SUS304), hairline
850g
Panel: Stainless steel (SUS304), hairline Call button: Metal
670g
Body, Handset: ABS resin, black
810g
Panel: Stainless steel (SUS304), hairline Call button: Metal
700g
Flush/surface―
― ―
―
―
―
―
―
―
―
―
― ―
― ―
― ― ― ― ―
―
― ― ―
― ―
― ― ― ― ―
―
― ― ―
―
― ―
*1:0 dB = 1V. *2:0 dB = 0.775V. *3:w/RS-191 Optional handset
Hands-free Hands-free(or handset*3)
AN8000-(E)1205A OA48031AOI
AN-8011MSHands-freeMaster Station
AN-8000MSMultifunctionalMaster Station
AN-8020MSIndustrial-Use Master Station
AN-8020MSIndustrial-Use Master Station
AN-8020MSIndustrial-Use Master Station
AN-8010MSMaster Station
AN-8010MSMaster Station
AN-8000MSMultifunctional Master Station
Factory Site
Speaker
PA Amp.
External Speaker
Switching Hub
External Speaker External
Speaker
Experiment Site
*Network status may sometimes cause audio quality to deteriorate to about 3.4 kHz.
Main Features
System Example (Factory Use)
System Equipment
AN-8000MSMultifunctional Master Station
PC for maintenance
AN-8000MSMultifunctional Master Station
AN-8000MSMultifunctionalMaster Station
Management Office
Machine room Factory office
Production line
Medicine laboratory
Darkroom Environment test room
Reception
Receivingindicate lamp
Receivingindicate lamp
●A network-based intercom system consisting of an exchange unit and dedicated stations.
●A single exchange unit can connect up to 16 stations. Stations are available in six different configurations. These are: AN-8000MS (master with LCD display), AN-8010MS (standard master), AN-8011MS (hands-free master), AN-8020MS, which is a heavy-duty type designed for use in adverse environments such as factories and various plants (dust- and water-resistant: IP54), AN-8031MS(Flush mount master), and AN-8050DS(Vandal resistant sub). ●Using IP stations AN-8500MS(IP master) & AN-8540DS(IP vandal resistant sub), permits a system having no exchange unit to be created. ●This system is equally suitable for use in a small-scale system with 16 stations, to meeting the demands of a large-scale system that can have as many as up to 1,280 stations. Once the intercom is connected to a network, efficient wide area connections even between remote locations can be achieved.
●The system includes convenient functions and features such as: Redial, Recall, One-touch dialing/Auto-dialing, Group Call, Group hunting/Absence transfer/Call Forwarding, Call Hold, and Scan Monitor. ●Using the echo canceller function makes hands-free simultaneous conversation an easy task. ●High quality audio with frequencies extending to 7kHz* for extra clarity is possible. ●Stations incorporate a built-in speaker, which allows station paging. PA paging can also be conducted using an external PA amplifier. Total broadcast capabilities of up to 160 zoneswith paging and all-call paging are possible. ●Total system maintenance can be conveniently performed through network using a personal computer that has dedicated software installed. AN-8000EX
Network Intercom Exchange Unit
Management room
Doorman room
Reception
AN-8000EXNetwork IntercomExchange
AN-8000EXNetwork IntercomExchange
AN-8000EXNetwork Intercom
Exchange
IP network compatiblecommunication systemThe AN-8000 Series is a network intercom system (IP network compatible intercom) employing packet audio technology. By connecting IP intercom exchanges (which can connect up to 16 stations per exchange), Multi interface units, and IP stations to a network (LAN or WAN), an optimal system can be constructed for in-house or wide area information communications such as duplex conversations between stations, periodical broadcasts, and BGM broadcasts. Since up to 80 exchanges, multi interface units and lP stations can be combined, systems of up to a total of 1,280 stations can be realized. The system’s "echo cancellation" feature makes hands-free duplex conversation possible (conversations made without using a handset at both parties) between stations. In addition, the multi interface unit features a contact bridge function to be performed by way of contact input and output control.
Offic
e
Lab
orato
ry
Facto
ry
Tra
ns
po
rtatio
n
Ho
spital
Airp
ort
AN-8000MSMultifunctional Master Station
AN-8011MSHands-freeMaster Station
AN-8011MSHands-freeMaster Station
AN-8011MSHands-freeMaster Station
AN-8000MSMultifunctionalMaster Station
AN-8020MSIndustrial-Use Master Station
AN-8020MSIndustrial-Use Master Station
AN-8020MSIndustrial-Use Master Station
AN-8010MSMaster Station
AN-8010MSMaster Station
AN-8000MSMultifunctional Master Station
Factory Site
Speaker
PA Amp.
External Speaker
Switching Hub
External Speaker External
Speaker
Experiment Site
*Network status may sometimes cause audio quality to deteriorate to about 3.4 kHz.
Main Features
System Example (Factory Use)
System Equipment
AN-8000MSMultifunctional Master Station
PC for maintenance
AN-8000MSMultifunctional Master Station
AN-8000MSMultifunctionalMaster Station
Management Office
Machine room Factory office
Production line
Medicine laboratory
Darkroom Environment test room
Reception
Receivingindicate lamp
Receivingindicate lamp
●A network-based intercom system consisting of an exchange unit and dedicated stations.
●A single exchange unit can connect up to 16 stations. Stations are available in six different configurations. These are: AN-8000MS (master with LCD display), AN-8010MS (standard master), AN-8011MS (hands-free master), AN-8020MS, which is a heavy-duty type designed for use in adverse environments such as factories and various plants (dust- and water-resistant: IP54), AN-8031MS(Flush mount master), and AN-8050DS(Vandal resistant sub). ●Using IP stations AN-8500MS(IP master) & AN-8540DS(IP vandal resistant sub), permits a system having no exchange unit to be created. ●This system is equally suitable for use in a small-scale system with 16 stations, to meeting the demands of a large-scale system that can have as many as up to 1,280 stations. Once the intercom is connected to a network, efficient wide area connections even between remote locations can be achieved.
●The system includes convenient functions and features such as: Redial, Recall, One-touch dialing/Auto-dialing, Group Call, Group hunting/Absence transfer/Call Forwarding, Call Hold, and Scan Monitor. ●Using the echo canceller function makes hands-free simultaneous conversation an easy task. ●High quality audio with frequencies extending to 7kHz* for extra clarity is possible. ●Stations incorporate a built-in speaker, which allows station paging. PA paging can also be conducted using an external PA amplifier. Total broadcast capabilities of up to 160 zoneswith paging and all-call paging are possible. ●Total system maintenance can be conveniently performed through network using a personal computer that has dedicated software installed. AN-8000EX
Network Intercom Exchange Unit
Management room
Doorman room
Reception
AN-8000EXNetwork IntercomExchange
AN-8000EXNetwork IntercomExchange
AN-8000EXNetwork Intercom
Exchange
IP network compatiblecommunication systemThe AN-8000 Series is a network intercom system (IP network compatible intercom) employing packet audio technology. By connecting IP intercom exchanges (which can connect up to 16 stations per exchange), Multi interface units, and IP stations to a network (LAN or WAN), an optimal system can be constructed for in-house or wide area information communications such as duplex conversations between stations, periodical broadcasts, and BGM broadcasts. Since up to 80 exchanges, multi interface units and lP stations can be combined, systems of up to a total of 1,280 stations can be realized. The system’s "echo cancellation" feature makes hands-free duplex conversation possible (conversations made without using a handset at both parties) between stations. In addition, the multi interface unit features a contact bridge function to be performed by way of contact input and output control.
Offic
e
Lab
orato
ry
Facto
ry
Tra
ns
po
rtatio
n
Ho
spital
Airp
ort
AN-8000MSMultifunctional Master Station
AN-8011MSHands-freeMaster Station
AN-8011MSHands-freeMaster Station
AN-8011MSStandard hands-freemaster station
AN-8020MSIndustrial-use master station
AN-8010MSStandard master station
RS-191Option handsetwith AN-8031MS
Master stationBasic system
System Configuration System Components
AN-8000MSMultifunctional master station
AN-8000EXNetwork intercom exchange unitStation: 16 stationsPA paging: 2 outputsEIA standard rack(1U) mountable
AN-8000MIMultiple interface unitAudio input and output: 2 channels eachControl input and output: 16 contacts eachPBX interface(E & M interface): 2 channels max.EIA standard rack(1U) mountable
AN-8500MSIP multifunctionalmaster station
AN-8050DSVandal resistant sub station, indoor use
AN-8540DSIP sub station,indoor use
Exchange unit Interface unit
IP master & sub station Available 2nd quarter 2006
OptionSub stationLAN system
IP network system
AN-8031MSFlush mount standard master station
YC-290Mounting bracketfor AN-8011MS
YC-280Mounting bracketfor AN-8000MS AN-8010MS AN-8020MS
PA AmpSpeaker
AN-8000EX
AN-8000EX AN-8000MI
Contact input
AN-8000EX
AN-8000EX AN-8000EX
Station
Station Station
Amplifier
BGM Player,Digital announcer,or other sound source
SpeakerPBX
PA AmpSpeaker
PA AmpSpeaker
PA AmpSpeaker
Internet,Private line,
etc.
Switching Hub Switching Hub
Switching Hub
Router Router
Router
SwitchingHub
UPS AC
2P
1P
AN-8000MS AN-8010MS AN-8011MS AN-8020MS AN-8031MS AN-8050DS
1P 1P
AN-8000EX
Station
AN-8000MI
Contact input
UPS ACUPS ACUPS AC
UPS AC
UPS
AD
AC
UPS
AD
AC
UPS AC
1P1P 1P 1P2P
2P 1P 1P 1P 1P 1P 2P1P
LAN
CAT5
CAT5
CAT5
AN-8500MS AN-8540DS
CAT5
CAT5CAT5
LAN
CAT5CAT5
1P 1P
1P 1P 1P
Contact output(door remote control)
: Connecting Local Area Network(LAN), up to 80 exchanges, multiple interface units and IP stations
: Up to 16 stations and 2 outputs for PA paging
: Connecting Wide-Area Network(WAN), up to 80 exchnges, multiple interface units and IP stations
Type of Station
AN-8000MS
AN-8010MS
AN-8011MS
AN-8020MS
AN-8031MS
AN-8050DS
AN-8500MS
AN-8540DS
Permits handset conversation when used in conversation with the RS-191 Option HandsetA PoE switching hub compliant with IEEE802.3af or AC Adapter locally available is required.
● ● ― ● ● ― ● ―
● ● ● ● ● ● ● ●
● ― ― ― ― ― ● ―
● ― ― ― ― ― ● ―
● ― ― ― ― ― ● ―
● ― ― ● ― ― ● ―
― ― ― ● ― ● ― ●
― ― ― ― ● ― ― ―
― ― ― ― ― ― ● ―
― ― ― ― ― ― ● ●
● ● ● ● ― ― ● ―
● ● ● ●
― ― ●
―
― ― ― ― ● ● ― ●
― ― ― ― ● ● ― ●
Speech Method Installation Method
Handset Headset Desk topHands-free
Wallmounting
Flushmounting
Surfacemounting
LCDdisplay
Auto-dialing
Externalspeaker
Externalcontrol
Externaldial input
PCcascade-connection
Power
*1
*1
*2
*2
*2
w/YC-280
w/YC-280
w/YC-290
w/YC-280
w/YC-280
AN-8011MSStandard hands-freemaster station
AN-8020MSIndustrial-use master station
AN-8010MSStandard master station
RS-191Option handsetwith AN-8031MS
Master stationBasic system
System Configuration System Components
AN-8000MSMultifunctional master station
AN-8000EXNetwork intercom exchange unitStation: 16 stationsPA paging: 2 outputsEIA standard rack(1U) mountable
AN-8000MIMultiple interface unitAudio input and output: 2 channels eachControl input and output: 16 contacts eachPBX interface(E & M interface): 2 channels max.EIA standard rack(1U) mountable
AN-8500MSIP multifunctionalmaster station
AN-8050DSVandal resistant sub station, indoor use
AN-8540DSIP sub station,indoor use
Exchange unit Interface unit
IP master & sub station Available 2nd quarter 2006
OptionSub stationLAN system
IP network system
AN-8031MSFlush mount standard master station
YC-290Mounting bracketfor AN-8011MS
YC-280Mounting bracketfor AN-8000MS AN-8010MS AN-8020MS
PA AmpSpeaker
AN-8000EX
AN-8000EX AN-8000MI
Contact input
AN-8000EX
AN-8000EX AN-8000EX
Station
Station Station
Amplifier
BGM Player,Digital announcer,or other sound source
SpeakerPBX
PA AmpSpeaker
PA AmpSpeaker
PA AmpSpeaker
Internet,Private line,
etc.
Switching Hub Switching Hub
Switching Hub
Router Router
Router
SwitchingHub
UPS AC
2P
1P
AN-8000MS AN-8010MS AN-8011MS AN-8020MS AN-8031MS AN-8050DS
1P 1P
AN-8000EX
Station
AN-8000MI
Contact input
UPS ACUPS ACUPS AC
UPS AC
UPS
AD
AC
UPS
AD
AC
UPS AC
1P1P 1P 1P2P
2P 1P 1P 1P 1P 1P 2P1P
LAN
CAT5
CAT5
CAT5
AN-8500MS AN-8540DS
CAT5
CAT5CAT5
LAN
CAT5CAT5
1P 1P
1P 1P 1P
Contact output(door remote control)
: Connecting Local Area Network(LAN), up to 80 exchanges, multiple interface units and IP stations
: Up to 16 stations and 2 outputs for PA paging
: Connecting Wide-Area Network(WAN), up to 80 exchnges, multiple interface units and IP stations
Type of Station
AN-8000MS
AN-8010MS
AN-8011MS
AN-8020MS
AN-8031MS
AN-8050DS
AN-8500MS
AN-8540DS
Permits handset conversation when used in conversation with the RS-191 Option HandsetA PoE switching hub compliant with IEEE802.3af or AC Adapter locally available is required.
● ● ― ● ● ― ● ―
● ● ● ● ● ● ● ●
● ― ― ― ― ― ● ―
● ― ― ― ― ― ● ―
● ― ― ― ― ― ● ―
● ― ― ● ― ― ● ―
― ― ― ● ― ● ― ●
― ― ― ― ● ― ― ―
― ― ― ― ― ― ● ―
― ― ― ― ― ― ● ●
● ● ● ● ― ― ● ―
● ● ● ●
― ― ●
―
― ― ― ― ● ● ― ●
― ― ― ― ● ● ― ●
Speech Method Installation Method
Handset Headset Desk topHands-free
Wallmounting
Flushmounting
Surfacemounting
LCDdisplay
Auto-dialing
Externalspeaker
Externalcontrol
Externaldial input
PCcascade-connection
Power
*1
*1
*2
*2
*2
w/YC-280
w/YC-280
w/YC-290
w/YC-280
w/YC-280
Unit DimensionsBacic Functions
System Capacity Multi Interface Unit’s Functions (AN-8000MI)
AN-8000EXAN-8000MI
AN-8000MSAN-8500MS
AN-8010MS AN-8011MS
AN-8020MS
RS-191 YC-280 YC-290
AN-8031MS AN-8050DSAN-8540DS
148
208
70.5
220
17098
195
92 56
208
148 70.5
420
483
349
44.5
56
254
115
50.64
162
493
Conversation
Call
Incoming Call Selection
Speed Dialing
Hold
Call transfer
Automatic Transfer
Remote Response
Executive Priority
Paging
Scan Monitor
Door Remote Control
Time-Out
Group Blocking
Station Speaker Output Setting
Ambient Noise Control
Number of Units
Connectable to LAN
Line Capacity
Speech Link Capacity
Single Exchange
Unit to unit
Paging Zones
Paging Outputs
Max. 80 (total of Exchanges, Multiple interface units
and IP stations)
Max. 1,280 (80 Exchanges x 16 stations per Exchange)
Max. 320 (80 Exchanges)
AN-8000EX : 4 links
AN-8000EX : 8 links
AN-8000MI : 2 links
Max. 160
Max. 160 (80 Exchanges or Multiple interface units are connected)
AN-8000EX: 2 outputs
AN-8000MI: 2 outputs
BGM Input
PBX Interface
External Contact Output
External Contact Input
System Settings
Max. 8 channels
Max. 160 (When 80 Multi interface units are connected)
Max. 1,280 (When 80 Multi interface units are connected)
Max. 1,280 (When 80 Multi interface units are connected)
Personal computer setting using a dedicated software
program (over LAN)
Hands-free conversation
Handset conversation
PTT conversation
Individual call
Redialing
Recall
Voice calling
Group call
Master station call
Automatic connection
Continuous call
Auto-dialing
One-touch dialing
Mic Off
Call hold
Group hunting
Absence transfer
Call forwarding
Zone paging
Multi-zone paging
All-call paging
Automatic response
Zone number designation paging
Hands-free conversation with duplex
Handset conversation with duplex
Press to talk conversation with simplex
Dials the desired station number
Redials the last number called
Recall the last conversation partner
Calls by voice holding down PTT key
Representative station is called, all member stations are simultaneously called with a continuous call tone
Pre-programmed master station can be called by the sub station
Incoming calls are automatically connected
Calls continuously and continuously flashes
Auto-dialing by one-touch dialing keys(8)(up to 20 digits)
Auto-dialing by one-touch dialing [7], [8], [9], [0], or [Off-Hook] keys (up to 20 digits)
Cut off voice temporarily
The conversation is on hold, transmitting a hold tone to both stations
Transfer a call to a third party
During busy mode, transfer a call to another designated station automatically
No response during a set period, transfer a call to another designated station automatically
Transfer a call to another designated station automatically without sounding a call tone
Answer a call to another station in the same group
If a called station is busy, forcibly terminates the current conversation, allowing the call to go through
Calls one of the pre-programmed zones
Calls up to 10 zones of the pre-programmed multiple zones
Calls simultaneously to all of the pre-programmed zones
Automatically initiates a response to the paging last received
Automatically initiates a response to a next-to-last paging
Scan an arbitrary group of pre-programmed stations for auditory monitoring
During conversation with door station, remotely controls external equipment such as electoronic lock
Limits time for the duration of calls, conversations and paging
Permits or disallows calls between groups
Permits adjustment of the station speaker sound volume
Automatically measures the ambient noise level of the station and sets the station for proper hands-free
conversation
Activating the control input after connecting the Remote microphone or playback components to the Multi interface broadcasting to the
preprogrammed zones
Calls or conversations mutually between AN-8000's stations and the PBX's extension telephones or paging from the PBX extension
Connecting playback components to the Multi interface unit permits Background music selectable from up to 8 programs to be heard
from each station speaker while in standby mode
External equipment is controlled by momentarily closing the Multi interface unit's corresponding contact though operation of the station
External equipment is controlled by closing or opening the Multi interface unit's corresponding contact though operation of the station
Closing the Multi interface unit's contact in synchronization with calls received enables calling station indication or CCTV system control
Control of such external equipment as electronic locks can be performed by momentarily closing the Multi interface unit's corresponding
contact through operation of the station
Close the Multi interface unit's output contact terminal when the input contact terminal is closed
Notifies the busy status of connected external PA paging equipment
115
External Input Paging
PBX Connection
BGM
External Equipment Control
One-shot make output
Make/break output
Calling Station Indication/CCTV Interlock
Door Remote Control
Contact Bridge
Paging Busy Input
34
64 31.8
13 2
50
131.5
83.5
60
83.5
80100
60140
28.7
116
2-gang mounting Single-gang or desk-top mounting Single-gang or desk-top mounting
46
220
4870
115
CapacityItem Item
Function Discription
Function DiscriptionCapacity
Unit DimensionsBacic Functions
System Capacity Multi Interface Unit’s Functions (AN-8000MI)
AN-8000EXAN-8000MI
AN-8000MSAN-8500MS
AN-8010MS AN-8011MS
AN-8020MS
RS-191 YC-280 YC-290
AN-8031MS AN-8050DSAN-8540DS
148
208
70.5
220
17098
195
92 56
208
148 70.5
420
483
349
44.5
56
254
115
50.64
162
493
Conversation
Call
Incoming Call Selection
Speed Dialing
Hold
Call transfer
Automatic Transfer
Remote Response
Executive Priority
Paging
Scan Monitor
Door Remote Control
Time-Out
Group Blocking
Station Speaker Output Setting
Ambient Noise Control
Number of Units
Connectable to LAN
Line Capacity
Speech Link Capacity
Single Exchange
Unit to unit
Paging Zones
Paging Outputs
Max. 80 (total of Exchanges, Multiple interface units
and IP stations)
Max. 1,280 (80 Exchanges x 16 stations per Exchange)
Max. 320 (80 Exchanges)
AN-8000EX : 4 links
AN-8000EX : 8 links
AN-8000MI : 2 links
Max. 160
Max. 160 (80 Exchanges or Multiple interface units are connected)
AN-8000EX: 2 outputs
AN-8000MI: 2 outputs
BGM Input
PBX Interface
External Contact Output
External Contact Input
System Settings
Max. 8 channels
Max. 160 (When 80 Multi interface units are connected)
Max. 1,280 (When 80 Multi interface units are connected)
Max. 1,280 (When 80 Multi interface units are connected)
Personal computer setting using a dedicated software
program (over LAN)
Hands-free conversation
Handset conversation
PTT conversation
Individual call
Redialing
Recall
Voice calling
Group call
Master station call
Automatic connection
Continuous call
Auto-dialing
One-touch dialing
Mic Off
Call hold
Group hunting
Absence transfer
Call forwarding
Zone paging
Multi-zone paging
All-call paging
Automatic response
Zone number designation paging
Hands-free conversation with duplex
Handset conversation with duplex
Press to talk conversation with simplex
Dials the desired station number
Redials the last number called
Recall the last conversation partner
Calls by voice holding down PTT key
Representative station is called, all member stations are simultaneously called with a continuous call tone
Pre-programmed master station can be called by the sub station
Incoming calls are automatically connected
Calls continuously and continuously flashes
Auto-dialing by one-touch dialing keys(8)(up to 20 digits)
Auto-dialing by one-touch dialing [7], [8], [9], [0], or [Off-Hook] keys (up to 20 digits)
Cut off voice temporarily
The conversation is on hold, transmitting a hold tone to both stations
Transfer a call to a third party
During busy mode, transfer a call to another designated station automatically
No response during a set period, transfer a call to another designated station automatically
Transfer a call to another designated station automatically without sounding a call tone
Answer a call to another station in the same group
If a called station is busy, forcibly terminates the current conversation, allowing the call to go through
Calls one of the pre-programmed zones
Calls up to 10 zones of the pre-programmed multiple zones
Calls simultaneously to all of the pre-programmed zones
Automatically initiates a response to the paging last received
Automatically initiates a response to a next-to-last paging
Scan an arbitrary group of pre-programmed stations for auditory monitoring
During conversation with door station, remotely controls external equipment such as electoronic lock
Limits time for the duration of calls, conversations and paging
Permits or disallows calls between groups
Permits adjustment of the station speaker sound volume
Automatically measures the ambient noise level of the station and sets the station for proper hands-free
conversation
Activating the control input after connecting the Remote microphone or playback components to the Multi interface broadcasting to the
preprogrammed zones
Calls or conversations mutually between AN-8000's stations and the PBX's extension telephones or paging from the PBX extension
Connecting playback components to the Multi interface unit permits Background music selectable from up to 8 programs to be heard
from each station speaker while in standby mode
External equipment is controlled by momentarily closing the Multi interface unit's corresponding contact though operation of the station
External equipment is controlled by closing or opening the Multi interface unit's corresponding contact though operation of the station
Closing the Multi interface unit's contact in synchronization with calls received enables calling station indication or CCTV system control
Control of such external equipment as electronic locks can be performed by momentarily closing the Multi interface unit's corresponding
contact through operation of the station
Close the Multi interface unit's output contact terminal when the input contact terminal is closed
Notifies the busy status of connected external PA paging equipment
115
External Input Paging
PBX Connection
BGM
External Equipment Control
One-shot make output
Make/break output
Calling Station Indication/CCTV Interlock
Door Remote Control
Contact Bridge
Paging Busy Input
34
64 31.8
13 2
50
131.5
83.5
60
83.5
80100
60140
28.7
116
2-gang mounting Single-gang or desk-top mounting Single-gang or desk-top mounting
46
220
4870
115
CapacityItem Item
Function Discription
Function DiscriptionCapacity
● Network intercom system connectable with IP network● Available to connect LAN or WAN● System configuration is flexble● Max. 1,280 stations connectable● Centralized control with a personal computer● System maintenance (verifying operation log and line supervision) also performable with a personal computer and internet browser● Connectable the PBX exchange● Available to control electronic lock system, CCTV surveillance system, etc. using input/output contact
Network Intercom SystemAN-8000 Series
SPECIFICATIONS
AN-8000EX AN-8000MI
(CE): 24W(max.), (CU): 21W(max.)―
―
―
―
Input: 2, max. 0dB*1, under 600Ω, balancedControl: 2, no-voltage make contact input, open voltage: 12V DC,
short-circuit current: 10mAOutput: 2, max. 0 dB*1, under 600Ω, balanced
Control: 2, relay contact output, contact capacity: 24V DC/0.5A16 inputs, no-voltage make contact input, open voltage;
12V DC, short-circuit current: under 10 mA16 outputs, relay contact output, contact capacity 24V DC/0.5A
PBX input and output: 2 channels, under 0 dB*2, avarage:under-15dB*2, 600Ω, balanced
2.8kg
Model No. Power Source Power Consumption Speech Link Hands-free Speech Method
Line capacity Paging Output Audio Input
Audio Output
Contact Input
Contact Output PBX I/F
Network Section Network I/F Network Protocol Audio Packet Transmission System Connector Audio Delay TimeFinish Weight
Model No.
Power Source Power Consumption Speech Method Audio Frequency RangeWiring Method Wiring distance LCD Display
Dial-in Contact Output
Line Connecting Terminal Headset Terminal
External Speaker Terminal Installation Method
Dust/Water Protection Finish Weight
Model No.
Power Source Power Consumption Speech Method Audio Frequency Range Wiring Method Wiring distance LCD Display
Dial-in Contact Output Headset Terminal
External Speaker Terminal Network Section Network I/F Network Protocol Audio Packet Transmission System Connector Audio Delay TimeInstallation Method Dust/Water Protection Finish
Weight
AN-8000EX(CE)/AN-8000MI(CE): 230V AC, 50/60Hz. AN-8000EX(CU)/AN-8000MI(CU): 120V AC, 50/60Hz 75W (max.)
Internal: 4, External: 8 (both Half duplex/Full duplex use)Simultaneous conversation by way of echo canceller or Half duplex
conversation by way of voice switchUp to 16 stations
Audio: 2 channels, max. 0dB*1, 600Ω, balancedControl: 2 channels, no-voltage make contact output (24V DC/0.5A)
―
―
―
―
―
4.2kg
48V DC (supplied from AN-8000EX) 2.4W (max.)
300 - 7,000Hz Non-polar one pair stranded wire system
Max. 1,500m(φ0.65mm, loop resistance 170Ω or less)
RJ11 modular jack
10BASE-T/100BASE-TX (automatic switching) TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Unicast (simultaneous paging to up to 16 zones) Multicast (simultaneous paging to up to 79 zones)
RJ45 connector 80ms, 320ms (switchable on the software) Pre-coated steel plate, black , 30% gloss
Hands-free or handset Hands-free Hands-free or handset
Alphanumeric characters (16 characters x 2 lines)
―
Speaker: 3 mW, 32Ω,Microphone:-49dB*1
0.6W, 8Ω
―
800g
Desk-top/surface(use YC-280)
Body, Handset: ABS resin, black
48V DC (supplied from AN-8000EX) 2.4W (max.)
Non-polar one pair stranded wire system Max. 1,500m(φ0.65mm, loop resistance 170Ω or less)
Flush/surface
Power supply device complies with IEEE802.3af standard or 12V DC 6W(max.)
Desk-top/surface (use YC-290)
―Body: ABS resin, black
400g700g
Open collector output (polarized), withstand voltage: max. 30V DC,
control current: max. 50mA
―
0.6W, 8ΩDesk-top/surface
(use YC-280)IP54
Body, Handset: ABS resin, gray1000g
AN-8000MS AN-8010MS AN-8011MS AN-8020MS
AN-8031MS AN-8050DS AN-8500MS AN-8540DS
Hands-free or handset
― ―
Alphanumeric characters (16 characters x 2 lines)
―Speaker: 3 mW, 32Ω,
Microphone:-49dB*1, 3.5mm mini jack0.6W, 8Ω ―
10BASE-T/100BASE-TX (Automatic switching) TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Unicast (1speech link, simultaneous paging to up to 16 zones) Multicast (simultaneous paging to up to 79 zones)
LAN: RJ45 connector (PoE compatible) PC: RJ45 connector (not-compatible with PoE)
80ms, 320ms (switchable on the software)
300 - 7,000Hz
Hands-free ― ―
Desk-top/surface(use YC-280)―
Panel: Stainless steel (SUS304), hairline
850g
Panel: Stainless steel (SUS304), hairline Call button: Metal
670g
Body, Handset: ABS resin, black
810g
Panel: Stainless steel (SUS304), hairline Call button: Metal
700g
Flush/surface―
― ―
―
―
―
―
―
―
―
―
― ―
― ―
― ― ― ― ―
―
― ― ―
― ―
― ― ― ― ―
―
― ― ―
―
― ―
*1:0 dB = 1V. *2:0 dB = 0.775V. *3:w/RS-191 Optional handset
Hands-free Hands-free(or handset*3)
AN8000-(E)1205A OA48031AOI