Embed Size (px)
Citation preview
ITEM No. 1
Specifications for Bio-safety cabinet Type B-2 (1 No.)
Should be NSF-49 certified
Microprocessor controlled Air controlled Class B2 cabinet.
Less energy consumption and heat output.
Single piece internal wall.
Working area: 4 ft width with single piece stainless steel surface.
Ergonomic design.
Antimicrobial coating
Long life ULPA supply filter and HEPA exhaust filter for airflow.
Exhaust Vent manifold assembly. With structural’s and fittings as appropriate.
Installation & demonstration at site.
Warranty of all the parts including the filters for at least 3 years.
On site service as and when required
2 nos. of power points 5/15 amp (Indian style) inside the cabinet
Accessories:
Minimum of 2 HP of exhaust blower
Full fitting and wiring
Germicidal UV lamp and fluorescent lamp
On line UPS (3KVA) with 1 hr backup.
The system should be supplied with 1.5ton (five star rating) split air conditioning unit with
appropriate wall mounted stabilizer (140V – 240V) in order to maintain ambient
temperature
No.5-70/2016-17/P&S/Ash
ITEM N0.2
Specification for Research microscope with photographic
image analysis system attached with PC
Binocular upright microscope with infinity corrected optical system, 25mm stage
stroke with fine and coarse adjustment knobs, illumination transmitted light with at
least
12 volts, 100watt halogen bulb, six positing revolving nose piece with slot for DIC.
Widefield 3 ways light distribution eye piece tube, swing out condenser, paired eye
piece 10X
(F.O.V. 22mm or batter, anti fungus type and with eye guard cap) mechanical stage
with capability to hold two slides at the same time.
Plan achromatic objectives (2X, 4X, 10X, 20X) and plan fluorite (40X and 100X oil).
Dedicated digital cooled CCD camera with minimum resolution of 5.0 Mega Pixel
The specification are generic in nature
Image Analysis Software: - image analysis software for image acquisition and
annotation capable of measuring quantitative data such as intensity, line profile,
spatial measurements such as length, width, area, perimeter, number of cells in
area with specific morphology etc.
Data Acquisition System:- Branded PC with at least i5 processor, 4 GB or better
RAM, 500 GB or better HDD, DVD RW, Genuine Windows 10 OS, LED monitor 32
inch, keyboard
and optical mouse and UPS Suitable for the whole assembly with back up of
minimum 1h should be provided.
NOTE:- MICROSCOPE, CAMERA & SOFTWARE SHOULD BE FROM SAME
MANUFACTURER FOR BETTER COMPATIBILITY & UPGRADABILITY OPTION
Warranty of at least two years should be provided.
No.5-57/2016-17/P&S/
ITEM No. 3
Technical specifications of Gradient PCR
1. The system should have 96 well format with at least six separate peltier blocks to
provide independent temperature zones to run six different assays with different
annealing temperature at the same time.
2. The system should be capable to run up to six separate temperatures in the same plate
with user’s defined time.
3. The system should be able to accommodate 0.2ml/0.1ml PCR tubes as well as
microplate
4. The system should support reaction volumes of at least 10µl
5. The system should have ramp rate ≥3.5°C with accuracy of ±0.5°C or less and provision
of heating lid to prevent sample evaporation.
6. The system should have capacity to store at least 500 programs in the instrument with
provision to store programs in memory stick also
7. The machine should be duly certified/authorized for PCR process and ISO 9001 & CE
certified
8. The system should be operable at 220-240v
9. The system should be supplied with at least two years warranty on all parts and on
demand repair services as and when required
10. Indian users list for the quoted model along with complete contact details including
telephone number and e-mail should be provided
11. Technical features described above should exclusively be supported by authentic
original illustrated company catalogue of the instrument/equipment quoted. Photocopy
or computer printout of catalogue will not be accepted
12. Vendors business record is to be authenticated by producing income tax returns for at
least three consecutive previous years
OPTIONAL:
1. The system should be supplied essentially with 2KVa online UPS with backup of at
least 1h on full load
2. The system should be supplied with 1.5ton (five star rating) split air conditioning unit
with appropriate wall mounted stabilizer (140V – 240V) in order to maintain ambient
temperature
No.5-72/2016-17/P&S/Ash
ITEM No. 4
Specification for ELISA READER
1. System must be handy and user friendly. Instrument should be able to work stand-alone also.
2. Automatic calibration before each reading
3. Compatible with various micro-plate platforms (FLAT,U, V-bottomed micro plate or up to 12
well strip plates)
4. Quick reading ability, single and /or dual wavelength selection
5. System must include compatible software for analysis and method performance validation.
6. Works between the wavelength ranges of 400 nm to 750 nm.
7. Photometric range between 0.0 to 3.0 0D and linearity range at least from 0.0to 2.0 0D
8. System must provide accuracy not less than ± 0.01 for 0.0-3.0 0D at different filters and
precision of 0.005 0D ( for 0.0-3.0 0D )
9. High resolution of 0.001 0D
10. Up to 5 Filters slots with filters ( e.g. 415,450,490, 500,655 nm)
11. Fast recording time –not more than 10 sec
12. Data output –USB interface with PCon –board thermal printer (optional)
13. Date storage- Calendar/clock function
14. Software of High throughout, which can run a number assays in a single plate
15. Multiple plates processing with automatic data export.
16. Custom reporting function with performance verification and kinetics analysis.
17. 240 Volt, 50/60 Hz, Stabilizer 0.5 Kva
18. Onsite warranty for at least 2 year.
19. Unit should operate at 220-290v / 50-60 Hz.
20. User’s list & original literature must be submitted
Optional:
Provided with computer (RAM-4GB, Hard-drive-512MB, Screen size-23’’ LED, CORE i5) for data
storage and analysis
No.5-69/2016-17/P&S/Ash
ITEM No. 5 Specification of Elisa Reader & Washer
Specification of Elisa Reader
Detection Mode: Absorbance
Light Source: LED
Photo detector : Photo diode
Plate type: 96 well microplate including strip well microplate.
Measurement mode : Endpoint, kinetic and multi-label measurements
Measurement Channel : 8 channel
Plate Shaking mode
Measurement range : 0-4 OD
Resolution : 0.001 OD or better
Wavelength Range: 400- 750nm
Wavelength selection up to 8 filters,
Standard filters 405nm, 450nm, 492nm, 620nm.
Accuracy: 0.010 OD or better
Precision: 0.005 OD or better
Linearity : ≤ 1 % or better
Full qualitative and quantitative analysis including all major curve fittings and comprehensive QC function.
Window based software Display: Operation through PC : i3 processor 4GB RAM, 500GB HDD, 18.5” TFT, Win10.,
ect., b/w laser printer, UPS (capability to work as standalone or with P.C. Connectivity
Specification of Elisa Plate Washer
Cross wise aspiration, over flow washing, bottom washing
16 channel manifold (8 channel × 2)
Manifold, plate carrier auto cleavable and also can be sterilized
1-4 Wash liquid channel
Equipment should be un-pressurized, capable of using any bottle or container.
Volume of wash liquid dispensed 50 to 3000µl with 50µl increment
Suitable for U,V & flat bottom micro plate etc
Residual volume per well <2 µl
Both the System should be FDA, IVD, CE and ISO Certified.
Should be supplied with 3 year warranty
No.5-52/2016-17/P&S/AK
ITEM No.6
COMPOUND MICROSCOPE WITH DIGITAL PHOTOGRAPHY FACILITY
Specifications
Magnification: 10-1500X
Optical System: Infinity corrected optical system.
Coarse/fine focusing: Fine: 0.1 mm-2.5 mm per rotation, coarse: 12-14 mm per rotation. Minimum
reading: 1 micron.
Illumination: Halogen lamp OR White LED array
Built in filter: Suitable colour balance filters
Observation tube: Trinocular tube/ergonomic type with in-built digital imaging head and two colour
LED arrow pointer.
Eye piece lens: Should be of atleast 10X magnification with diopter adjustment facility with a field of
view of 22 mm or higher.
Nosepiece: Revolving reversed sextuple nose piece
Stage: Cross travel: XY stage left right, with vernier calibration, specimen holder for 2 slides.
Objective lens: 4X, 10X, 20X, 40X, 100X (oil immersion lens)
Condenser: Universal condenser for bright field, phase contrast and dark field applications. The
system should have polarizer and analyzer attachment.
The above system should be upgradable to 7-8 position fluorescent attachment.
Power consumption- 0.2A/6W – 0.9A/48W
Power supply: 12V DC, 1.5A (for mains 100-240V AC, 47-63 Hz,) with voltage stabilizer.
Accessories: All required accessories and Ocular Micrometer scale, Stage Micrometer, Immersion oil
500 ml, Non Fluorescence Oil 500 ml, Spare bulb Halogen and Spare bulb for 120W Metal Halide,
dust cover etc.
Digital Camera
1. Scientific grade colour CCD camera with resolution of atleast 2.5 Megapixels. Sensitivity-
equivalent to ISO 200/400/800, progressive scanning method, auto/manual exposure control. USB
3.0 interface. Live image display (frame rate) of minimum 25fps at full resolution.
2. Along with scientific grade research imaging analysis software for photo and movie acquisition.
Data Processing System: Reputed brand computer system with atleast i5 processor, 4 GB or higher
RAM, 500 GB or higher HDD, 19” or better TFT Monitor, DVD RW, keyboard and mouse.
NOTE:
1. The microscope, camera & imaging software should be from the same manufacturer for
better compatibility & seamless integration.
2. The quoted microscope should be on-site upgradeable to step-wise motorization i.e.
motorized 6-positions or higher nosepiece, motorized XY stage, motorized focusing,
motorized universal condenser with at least 7 slots for optical elements, motorized
fluorescence attachment with at least 6 positions fluorescence turret.
3. Quoted system should be ISO/CE certified.
4. The bidders must mention the link of their manufacturer’s website for confirmation of
specifications compliance.
Warranty: Mention period.
Installation: At ICAR-IVRI Regional Station, Palampur, HP
No.5-47/2016-17/P&S/Ash
ITEM No.7
Technical Specifications for Bio-safety Cabinet Class -II B2
1. Working Area : W 4 x D 2 x H 2 ft (approx).
2. Type : Vertical Laminar Flow.
3. Airflow Pattern : 100% exhaust
4. Remaining filter life should be constantly displayed.
5. The blower motor should be able to compensate its speed against the loading filter for the full life of the HEPA / ULPA filter.
6. Blower motor should be DC-driven and of the latest technology.
7. Supply and exhaust HEPA filters.
8. The cabinet should be fitted with illumination facility and UV-light.
9. The cabinet must be fitted with a pressure sensor to ensure the consistent and reliable downflow across the HEPA filter and also to detect pressure drop across the supply filter.
10. The intensity of lighting inside the cabinet should be 800 lux or more and the light should be glare-free.
11. The microprocessor controller must be located on a slanted front panel.
12. The interior of the front window must be accessible for cleaning without requiring the user remove or support the window.
13. The noise level must be 65 DBA or less.
14. Particle retention should be 0.3 micron and above.
15. Service fixtures for gas and water supply.
16. Atleast one electric supply outlet in the cabinet.
17. The system should be provided with a suitable base stand.
18. Visual and audible alarms for warning if any safety parameters are incorrect.
19. Power supply: 230V, +/-10%, 50 Hz.
20. Bio-safety cabinet Class-II B-2 should be NSF (USA) or EN12469 (UK) certified and certificate must be attached as a proof.
21. Charges for ducting should also be quoted.
22. Warranty for 2 years.
23. Optional: i). 5KVA online UPS branded with 01 hrs back-up on full load.
ii). Air conditioner 1.5 ton branded with suitable wall mounted stabilizer.
No.5-62/2016-17/P&S/Ash
ITEM No.8
Specifications for ANAEROBIC CHAMBER with gas cylinders and compatible voltage stabilizer 1. Should be an anaerobic workstation for performing anaerobic and microaerophillic bacteriological work. 2. Should have a Capacity of holding 300 or more Petri Dishes of 90 mm size. 3. Port / Airlock Capacity should be 20 plates or more via airlock 4. Temperature Range of incubator should be 5°C above ambient up to 45°C or more. 5. Should work with Gas Supplies of anaerobic gas mixture or nitrogen gas 6. Should have gas level alarm/ indicator light system and over temperature safety indicator/ controller 7. Should have Foot-pedal operation switch for handfree control and single piece plexiglass front for easy viewing 8. Should have dehumidification/ Condensate control system and internal power socket for the use of small laboratory instruments inside the chamber 9. Electrical power requirements are 220-230 V/50-60 Hz 10. Should have Glove Ports and Gloves Material should be latex free 11. Working area should be a minimum of approx. 640 mm x 230 mm x 310 mm 12. Should be supplied with Petri plate holders, Storage tray, mixed gas Cylinder and Nitrogen gas cylinders fitted with gas regu lators, Catalyst holder, vacuum pump, foot pedal assembly etc. for smooth operation 13. Should have manufactured according to International Standards EN61010 or UL61010 or Can/CSA61010. A copy of the certificate should be attached. 14. Should be supplied with compatible voltage stabilizer. 15. Warranty period required: minimum of 2 years from date of installation. No.5-13/2015-16/P&S/SK
ITEM No.9
Urine Analyzer
Technical specifications
1. Should have the different test parameters like urobilinogen, bilirubin, ketone, blood, protein,
albumin, nitrite, leukocytes, glucose, specific gravity, pH, creatinine etc.
2. System should have at least 4 different wavelength (520nm to 660nm) and cold light source
ensure the result accuracy
3. Test principle should based on Photoelectric colorimetry
4. Computer interface: RS-232 port; parallel printer interface
5. Large LCD Display
6. Power Supply: 230 ± 10 VAC, 50 Hz
7. Operation cost should be economical.
8. Branded laser Printer for test reports.
9. System should come with suitable branded power backup of suitable capacity to ensure at least
1 hour power backup.
10. Vendor should enclose ISO/CE conformity certification and Original brochure.
11. Two year comprehensive warranty from date of installation.
F.No.5-65/16-17/P&S/Ash
ITEM No.10
Tissue Homogenizer
Technical specifications
Tissue homogenizer(hand held) designed to handle a wide range of samples from 0.05ml to 1000 ml.
It should be with powerful motor.
Noise Level : Less than 70 db
Variable speed control from 8000 to 30,000 rpm
System includes probes of 5mm x 75mm Flat Bottom Generator Probe, 7mm x 95mm Saw Tooth Bottom Generator Probe
Homogeniser motor should carry 2 years warranty.
Tool kit, Clamp for stand mounting and instruction manuals should be supplied along with the system.
It should be CE Approved
Vendor must enclose original brochure for verification of specifications conformity of quoted homogenizer in tender.
Workable power supply: 220-240V.
Optional : 10mm x 115mm Saw Tooth Bottom Generator Probe
F.No.5-64/16-17/P&S/Ash
ITEM No.11
Technical specifications of shaking incubator
1. It should have wide temperature range: 10°c below ambient to 60°c with temperature
accuracy between ± 0.1 to ± 0.30 at 37˚ C
2. Shaking speed : At least 400 rpm with accuracy ± 1 % of maximum RPM
3. System should have triple eccentric counter balanced drive or direct drive single eccentric
system or five point supported drive for trouble free operation
4. The shaker platform should be capable of accepting flasks of different capacities upto 5
litres or more. Clamps/holders for different capacity flasks (100 ml (8), 250 ml (12), 500ml
(12), 1000 ml (8), 2000 ml (4), 5000 ml (2) must be provided with the system
5. It should have rapid air circulation to produce quick temperature equilibration and recovery.
6. Even at heavy loads and at maximum speeds shaker should not produce unwanted vibration
and noise.
7. Audible and visible warning in case of deviations in rpm and temperature set point.
8. In the event of power failure, the shaker must return to its original operating condition when
power is restored.
9. Should have provision of easy cleaning and containment of spills.
10. The incubator shaker must be essentially supplied with a compatible online UPS for
uninterrupted operation
11. Should be supplied with one 1.5 ton split Air Conditioner to maintain ambient room
temperature during summer
12. Warranty on the machine for a period of at least two years from the date of installation must
be provided and AMC charges for additional three years must be given separately.
13. Indian user’s list for the quoted models along with complete contact details including
telephone no. & e. mail should be provided.
14. Technical features described above should exclusively be supported by authentic original
illustrated company catalog of the instrument/equipment quoted. Photocopy or computer
print-out of catalogue will not be accepted.
15. Vendor’s business record is to be authenticated by producing Income Tax return for at least
3 consecutive previous years
Optional accessory must be quoted separately
1. Any accessories which enhance the performance and applications of equipment
F.No.5-114/2015-16/P&S/AK
ITEM No.12 Specification for Blood/Serum Auto Analyzer
A. Automatic Blood Analyzer
It should be applicable for use in animal species including domestic like cattle, buffaloes, sheep, goat etc.
It should have five part differential mode of operation.
It should have measurement principle flow cytometry/laser light scattering for WBCs and impedance/
Photometry based method for RBCs, Platelets and Hemoglobin.
It should provide data for at least about 18 blood parameters.
Sample volume required for analysis should be minimum (20-50µl).
It should have throughput of 20-50 samples per hour.
It should have accuracy of measurement and precision of ±0-3%.
It should have data storage capacity of 50000 sample data or more.
It should have an automatic cleansing system for probes and entire system.
It should have an alarm system for any error.
Reagents should be cyanide free.
It should have digital LCD/LED display.
It should be supplied with one suitable PC (i7 processor, window license with antivirus, multimedia kit) with
latest configuration.
It should be supplied with the required software for the analysis.
Original brochure for the equipment should be provided.
It should be supplied with one at least 3KVA digital voltage stabilizer.
It should be supplied with all its required accessories
It should be quoted along with its required chemicals for analyzing at least 500 samples their operation
B. Automatic Serum Biochemistry Analyzer
Fully automatic system for biochemical analysis of serum/blood, other body fluids, etc.
Microprocessor controlled with LCD/LED display
Method of analysis: end point, kinetic, blanking, concentration, dichromatic, turbidity assay, fixed and variable
time and coagulation assay etc.
It should carry out assay of 30-40 parameters of serum/blood/urine/CSF etc
It should have throughput of 30-50 samples/hr
It should use minimum sample volume upto 50 µl
The cuvette should be of high quality UV transmitted plastic cuvette
There should be automatic washing system for cuvette
There should be an alarm for any error
It should take reading in wavelength of range 200-800nm
There should be automatic calibration system
Light source : halogen lamp with lifespan of upto 2500 hours and auto shutdown
Absorbance : 0-3.0 OD
Absorbance resolution and accuracy : ±1.0 %
Carry over : less than 1%
Detector: Photo Diode
Data storage : 50,000 records or more
There should be Interface for computer, printer etc.
It should be provided with suitable software for the analysis of bio-chemicals
It should be supplied with all accessories required for operation and analysis
It should be quoted along with its required chemicals for at least 500 samples
One 3 KVA online UPS with 1 h back-up on full load to be quoted separately may be quoted as optional
General Terms & Condition
The bidder should provide the user’s list along with their contact details for both equipment (Blood and
Serum Analyzers)
The firm should have its service center in the country
Warranty for minimum 1 year and service should be provided 3 times in a year.
F.No.5-93/16-17/P&S/MKS
ITEM No.13 HIGH SPEED-LOW TEMPERATURE CENTRIFUGE
Specifications:
Touch pad with selection of speed, time , temperature, RCF with large number
programme storages.
Fixed angle rotor for 30 X 1.5/ 2.0 ml tubes with speed 14000 rpm and 21000 x g or
more.
Fixed angle rotor for 6 x 50ml tubes with 12000 rpm and 18000 x g or more.
Adaptors for 15ml conical tubes (6 Nos).
Temperature range of -9°C to +40°C, CFC free refrigerant.
Centrifuge must have a fast cool function to shorten the cooling process.
Automatic temperature should starts up at a specific time to automatically pre-
prepare temperature before centrifugation.
Should have option to accelerate and decelerate gently for sensitive samples using
SOFT function. Timer for run can be set up to 99 minutes continuous.
Microprocessor controlled voltage stabilizer (3KVA) for the centrifuge.
3KVA online UPS with 01 hr. backup on full load.
Working at 230V, 50Hz with 1 year warranty.
EC Conformity Declaration certificate.
Window AC 1.5 Ton with 5 KVA microprocessor controlled stabilizer for smooth
functioning of the refrigerated micro centrifuge.
F.No.5-21/16-17/P&S/AK/GIP
ITEM No.14
Specifications for Ultra Low Freezer (–80ºC)
1. Ultra low temperature freezer up to –80ºC, VERTICAL (upright) freezer
2. Capacity: 320 Liters or above.
3. Either width or depth : < 890 mm
4. Noise: ≤ 56 dBA
5. Single door with insulated inner doors (2-5)
6. Microprocessor control with LCD display
7. CFC-FREE, HCFC-FREE refrigerant
8. With four heavy duty castor wheels
9. Voltage range: 190-270 V, 50-60 Hz
10. Energy usage: ≤ 17 KWHr/ day
11. Freezer should have adjustable shelves (3-5)
12. High grade stainless steel body (inside and outside).
13. Ultra thin insulation with Vacuum panel and Vacuum + PUF
14. Silicon gasket on the doors
15. Alarms for temperature deviation, power failure, clean filter.
16. Eye level display of temperature parameters, LCD panel.
17. ISO 9001/ CE approved.
18. At least two years on-site warranty with 5 years warranty on compressor.
19. One 1.5 ton split AC to be provided. Branded/ 4-5 star rating/ LCD display with wall mounted stabilizer.
20. To supply with 3KV Servo voltage stabilizer, with 2-3 minute time delay facility.
21. USERS LIST of quoted model with email and phone numbers to be provided for last five years.
22. Provide authentic original printed company catalogue of the instrument/equipment quoted.
23. A pair of suitable cryo gloves to be provided with system.
F.No.5-53/2015-16/P&S/Ash
ITEM No.15
Water Purification System:
Specifications 1. Model: Water purification system with all accessories for providing laboratory grade
Ultrapure (Type – I) and Pure (Type – II) water separately from the fed potable tap water.
2. Type II water quality: Resistivity: ≥ 5MOhm.cm; TOC : <30 ppb; bacteria <0.1cfu/ml;
particulates <1/ml; pyrogens<.005EU/ml; RNAses <0.01ng/ml
3. Type I water quality: Resistivity: ≥18.2 MOhm.cm, TOC: <5 ppb, bacteria <0.1cfu/ml;
particulates <1/ml; pyrogens<.005EU/ml; RNAses <0.01ng/ml
4. Features: Pre-filtration unit to remove the particulate matter from fed water and Booster
pump for maintaining the required feed pressure,
5. EDI technology: Self regenerating electro deionization (EDI) principle and reverse
osmosis for removal of ionic and inorganic impurities.
6. UV lamp: Installed in the system to allow reduction of the level of bacteria and TOC
7. Flow Rate: Type-I/Type-II water flow rate of 2 L/min. Type-I controlled by plunger.
8. 0.22u filter and cartridge: 0.22u filter cartridge for pure water in cell culture and cartridge
for DNAse/RNase/pyrogen free water in biotechnology applications (both to be provided
with the system).
9. Reservoir: 01 No. of about 50 litre to store Type II water.
10. Display: LCD display to shows water quality parameters.
11. Warranty: On machine and all essential accessories for 02 years from the date of
installation.
12. Brochure: Technical features should be supported by original company literature.
13. User list: List of 10 recent installations with their contact number, E mail and address.
14. All accessories to connect the system with tap, storage tanks, dispensers etc. should be
provided by the bidder and all the parts/ accessories/ attachments should be from the
same/ authorized manufacturer for optimum and efficient operation of the equipment.
Optional Accessories to be separately quoted essentially
1. Stand : for mounting the entire system on the wall should be provided to save the bench
space
2. Dispensers: For Type – I and Type- II water.
3. AMC Charges: Must be provided and AMC charges for additional three years must be
given separately.
F.No.5-96/16-17/P&S/AK
ITEM No.16
TECHNICAL SPECIFICATIONS FOR UV/VIS Spectrophotometer
1- Suitable for applications in the wavelength range 220-900 nm, Voltage- 230,50Hz 2- Minimum detection volume should be 2µl. 3- Light source: Pre-aligned Deuterium and Tungsten Halogen lamps with
automatic. 4- Switchover Double Beam. 5- Bandwidth< 1nm. 6- Options for single and multi-wavelength Measurement. 7- Provision for holding micro and standard cuvettes. 8- Provision for thermo controlled cuvette holder will be an added advantage
Software for data acquisition and analysis. 9- Instrument should be Robust and compact with options for both
computerized and standalone mode (s) 10- Compatible Stabilizer. 11- Should include standard make computer system with latest configuration
of Processor, 500GB HDD, 4GB RAM, DVD Writer, 17” Colour Monitor, Keyboard, Mouse, Laser Printer Uninterrupted power supply (Online UPS) backup for both instrument and computer.
12. Warranty- at-least two years 13. Original catalogue should be included for reference. Optional Accessories: Two Sets of micro and standard Cuvettes Provision for holding a microplate
F.No.5-24/2016-17/P&S/MKS
ITEM No.17
-20C Deep Freezer (Two Nos)
Specification:
1. Deep freezer with locking system, rear wheels with at least six shelves/drawers/Trays.
2. Capacity: at least 300 liters
3. Microprocessor controlled upright model (vertical)
4. Operating temperature: -15°C to -25°C
5. Programmable control system with safety alarm(audio -visual)
6. CFC free refrigerant
7. Digital/analogue display of temperature
8. Durable, high impact plastic coated stainless steel interior
9. Electric requirements: 220-240 volts, single phase, 50Hz
10. Should be supplied with a suitable voltage stabilizer back-up system
11. Should be complete with all accessories along with one year of warranty
12. Exterior-Plastic coated exterior
13. Super cool/fast cool function
F.No.5-108/2016-17/P&S/Ash
ITEM No.18
Technical Specifications for Microspectrophotometer
Light source should be from Quartz-halogen/ Xenon flash lamp
Wavelength range of 200-1000nm, automatic wavelength selection.
Automatic calibration before each reading.
Linear measurement range of 0 - 3Abs, ±2%: accuracy 0 - 3.0 Abs, ±1%, precision as 0 - 3.0
Abs.
Temperature control from 10 to 45 oC.
Readout range 0 - 4 Abs or more.
Should be able to take the reading from 96 well plate U/flat type and cuvette.
Should have at least 5 - 8s reading speed.
Should have variable speed plate shaking capacity in different modes.
Should have inbuilt software for different analysis like curve fitting, blanking, end point,
kinetic, spectral scanning, export of data in different forms.
It should be supplied with accessories required for micro volume multiple sample (2-4 µl)
Abs.
The system should be provided with one compatible computer of latest configurations.
One 2 KV online UPS with power back up of 30 – 60 min.
Warrantee for at least two years.
Working on power supply 220 - 240V, 50Hz.
International agencies like CE, TUV certified.
Original information brochure of the Instrument should be provided.
F.No.5-109/2016-17/P&S/SK
ITEM No.19
Specification for Trinocular Research Microscope with committed digital camera, image
analysis software, attached with computer
Type of microscope: Upright, trinocular microscope
Eye piece: Binocular /sliding with graduated and adjustable diopter, Wide field, high eye
point with 10x/16x lenses coated with antifungal
Nose piece: Provision for attaching at least 6 objective lenses
Objective: Semi APO PLAN Infinity Corrected coated with antifungal
Objectives should be compatible for working in both bright light as well as
fluorescent light
Details of objectives: 4X, NA 0.1 or higher, W.D. 18.0; 10X, N.A 0.25 or higher,
W.D. 10.0; 20X, N.A 0.4 or higher, W.D. 1.2; 40X, N.A 0.75 or higher, W.D.
0.50, 100X Oil, N.A 1.3 or higher, W.D. 0.2
Stage: Ceramic Coated Low Profile double Stages with scale marking and slide holder with
low positioned X-Y coaxial control knobs, Size of stage 15-20 cm x 10-14 cm,
Condenser: Adjustable condenser centre with 1.25 numerical aperture with scale marking
corresponding to the objective lenses
Filters: Prism filters for bright light as well as filters for UV, Blue, Green and Red
wavelength
Focusing: Coarse and fine adjustable focusing with low position controlled knobs
Illumination: LED/Halogen Illumination.
EPI-Fluorescence Attachment with filters: Modular 6-8 positions EPI- Fluorescence
illuminator attachment with prism filters for blue, green, UV and red wavelength alongwith
100 watt mercury lamp with minimum life of 200-250 hours. An additional 100 watt
mercury lamp should be provided.
Image Capture module and image analyzer software: Image capture module with color fast
cool technology, CCD type with C mount with provision of image capturing and live
recording with precise measurement tools, 5 mega pixel or higher camera, resolution of
upto 10X, USB and fire wire provisions, image analysis software should be compatible with
latest windows based operating system. Microscope, camera and software should be from
same manufacturer preferably.
System should quoted with one computer with i7 processor, 1TB HD, 4GB RAM as
optional.
The system should be supplied with 3 KV stabilizer with high ampere and timer control
system
Warranty – at least FIVE YEARS from the date of supply against any manufacturing defects
post installation
The supplier should have their Service Centre in India.
The supplier should have experience of installing the system in India and should provide the
list of the laboratories/institutes where it has been installed.
The supplier should provide servicing of the Instrument at least 2 times in a year including
cleaning, and antifungal treatment of the lenses and the duct system till the period of
warranty. Rate for AMC should be quoted for instrument after warranty period.
Compliance report against each specification in tabular format in hard copy as well as soft
copy in CD and original copy of the catalogue of the entire system should be provided.
Original information broucher of the Instrument should be provided
Price should quoted at destination
The Microscope, Camera and software should be from same manufacturer preferably.
AMC should be mentioned.
No.5-54/2016-17/P&S/Ash
ITEM No.20
Technical specifications for deep freeze (-80 0C)
Capacity: 23 Cubic feet approx. (650 liters approx.)
Temperature Range: -70 0C to -860C
Temperature Control: Electronic with RTD control probes
Display and monitoring system: Through an eyelevel electronic digital display setup
Door Design: External double door with horizontal division preferable with
Ergonomical door handles for one –handed operation
Construction of cabinet: Heavy gauge, cold rolled steel with powder coating and
provision for dual wheel locking castors
Interior : Stainless steel
Four interior compartments doors to reduce temperature loss.
Shelves: Two adjustable shelves inside each door made up of stainless steel
Refrigeration Type : Cascade system with non CFC-refrigerant
Insulation: Non CFC foamed –in place urethane
Condenser cooling: Through front to back air flow system with removable air-filters
Pressure equalization: Through vacuum relief port
Quality and safety standards: CSA certification, CE and ISO registration
Protection of compressors: Through built-in automatic voltage compensator against
power/voltage fluctuations
Safety Alarms: For probe power failures door open high/low temperatures, probe
failure, wrong Power, low battery, hot condenser, high stage failure, clean filter
through audio and visual alarms
Power : 230 Volts, 50 Hz single –phase operation
Voltage Stabilizer: 10KV Voltage Stabilizer auto controlled
Warranty: At least 03 years on equipment and 04-05 years on compressor
No.5-66/2016-17/P&S/MKS
ITEM No.21
Technical Specification of REFRIGERATED WATERBATH INCUBATOR SHAKER
Temperature range: 5°C to 50°C
Shaking Speed: 0-300 RPM
Double walled, stainless steel.
Shaking Tray made of Stainless Steel 1 No.
Speed controlled by speed regulator.
RPM display on indicator and temperature display.
The water bath should have capacity to hold atleast 9 lotus clamps for
holding 500 ml flasks alongwith universal platform.
Power supply 220 V, single phase 50 hz AC
Temperature Accuracy: ± 0.5°C
Stabilizer : 3 KVA
Warranty: 2 Years
F.No.5-16/2016-17/P&S/Ash
ITEM No.22
Specification for Portable light weight low amp welding machine (Qty. 1 No).
1. Input voltage : 220 + 15%
2. Rated input power : 9-10 KVA
3. Input current : 40-45 Amp.
4. Output voltage : 30 V
5. Output current : 20-250 Apm.
6. Duty cycle : 60%
7. Efficiency : 85%
8. P.F. : above 0.90
9. Insulation class : F
10. Air cooled type
11. Copper wiring of transformer
12. Lead = 60 meter
13. Spare set of electrode & holding clamp-4
14. Electrode packets -5 (each of atleast 100 electrodes)
15. Goggle for protection from UV light- 5 Nos.
16. Demonstration at site
17. Weight : 7-9 kg.
18. Warranty : Atleast 12 months.
Should also have
a) Auto protection of over voltage & over current
b) Auto compensation for voltage fluctuation.
c) Good arc commencing, arc force and anti-sticking
d) Stable arc.
e) Suitable for electric arc welding work.
F.No.5-28/2016-17/P&S/SK
ITEM No.23
Gradient Thermal Cycler Specifications:
1. Easy to operate gradient thermocycler 96 well block, with a 3 KVA online UPS
for 60 min back up on full load, block should accommodate 0.2 PCR tubes, plates; peltier technology with ramping range 3-4°C/sec and temperature range of 0-100°C; number of programmes- 500 in device, working power
supply 230 V
2. Gradient range: 20°C or more/4-99°C
3. Heated lead lid temperature range up to 100 or more
4. Auto restart after power failure
5. USB port for communication
6. Display LCD touch screen or touch pad button
7. Two years warranty from date of installation
8. User list containing recent 10 installation with valid phone Nos and Email IDs
9. Authentic original broucher mentioning specification quoted
10.Air conditioner 1.5 ton 4/5 star rating branded with LCD display and stabilizer (wall mounted) to be provided with the system.
F.No.5-104/16-17/P&S/SK
ITEM No.24
Technical Specifications for THERMAL CYCLER
The system should have 96 well format with at least six separate peltier blocks to provide
independent temperature zones with different annealing temperature at the same time.
Running mode:‘Standard’ and ‘Fast’ run modes in a single instrument.
Tube accommodation: Accommodation of 0.2ml PCR tubes as well as microplate.
The system should have programmable heat lid cover (1000C or more).
The system should support reaction volumes of at least 10-80 µl.
The operating temperature range 0-1000C.
The block ramp rate: 3-40C.
The system should have capacity to store at least 500 programmes in the instruments with provision
to store programmes in memory stick also.
The system should be supplied essentially with 3kVa online UPS with back-up of at least 1 h on full
load.
The system should be operable at 220-240V.
Two years warranty on all part and on-demand repair services as and when required.
Need authentic original illustrated company catalog of the instrument/equipment quoted/ Vendor’s
business record is to be authenticated by producing Income Tax return for at least 3 consecutive
previous yeas
Optional (to be quoted separately) :A 1.5 ton split air –conditioner with appropriate stabilizer in
order to maintain ambient temperature must be supplied with the System.
F.No.5-105/16-17/P&S/SK
ITEM No.25
Specification for Electronic weighing Balance (Qty. 2 Nos).
1. Heavy duty platform1000 x 1000 mm as per I.S.. 2062, suitable for
weighing Mash feed bags.
2. Capacity : 1 Ton
3. LED Display with stand
4. Load Cells : 4 Nos. as per OIML C 5 accuracy
5. Fabrication as per I.S 800
6. Supply, installation, Testing & commissioning
7. Warranty: At least 12 months
F.No.5-30/2016-17/P&S/SK
ITEM No.26
1. Cryocans for storage
Specifications
1. Capacity: about 33-35 lit.
2. Empty weight: about 15 kg
3. Outer diameter: 460-470 mm
4. Neck diameter: 50-52 mm
5. Number of canisters (stainless steel): 6 (11x2.8 inch)
6. Straw (0.25ml)capacity: about 1000
7. Static evaporation rate (at 20 0C): 0.18 L/day
8. Static holding time (at 20 0C): about 200 days
9. Certification: ISO9001
10. Warranty at least one year
2. Cryocans for transport
Specifications
1. Capacity: about 33-35 lit.
2. Empty weight: about 15 kg
3. Outer diameter: 460-470 mm
4. Neck diameter: 50-52 mm
5. Static evaporation rate (at 20 0C): 0.18 L/day
6. Static holding time (at 20 0C): about 200 days
7. Certification: ISO9001
8. Warranty at least one year
Quote optionally
1. Wheeled accessory cart (5 inches. high)
2. Cryo sleeves (100 per case)
3. Portable cryocan of 8-10 lit. capacity.
4. Stainless steel container (for carrying samples) of 1.0 lit capacity.
F.No.5-98/16-17/P&S/Ash
ITEM No.27
Refrigerated Centrifuge:
Specifications:
Model: Microprocessor controlled Table top/ floor mounted refrigerated centrifuge
Temp. range: -9°C to + 40°C selectable in 10C increment
Maximum Speed: 13,000rpm or more
Maximum g-force/rcf: 20,000g or more
Ramping: 8-10 acceleration and de-acceleration ramps
Speed selection: either in rpm or g/rcf
Motor: Maintenance free induction motor
Timer: 10sec to 99 h or continuous run mode
Display: Digital display of speed, time and temperature
Safety: Imbalanced detection with auto cut off/ error messages/ audible-visible alarm
Features: Fast cool option/Short spin key
Rotor Identification: Automatic
Memory: At least 30 programs memory.
Lid: Motorized lid locks
Noise level: less than 65 dB
Rotors: 02 no. to be provided with the system
Fixed angle rotor with lid for least 24 X 1.5/2ML microcentrifuge tubes, MAX. SPEED should not be less than
12000 RPM (adaptor for 0.5ml and 0.2 ml tubes to be provided-24no. each)
FIXED ANGLE, ROTOR with lid for at least 6 X 50 ML conical centrifuge tube , with reduction adaptor for 15ml
centrifuge tubes- 6no.; Maximum speed should not be less than 11,000 RPM
Warranty: at least 02 years from the date of installation
Stabilizer: Suitable servo controlled voltage stabilizer
Power supply: 220- 240V, 50/60 Hz to suit local conditions.
Optional Accessories to be quoted separately:
Swing Out rotor for 4x100mL with 4500xg, 5000 rpm with autoclavable buckets & suitable nos. of adaptors for 4x50/15mL tubes
F.No.5-102/16-17/P&S/MKS
ITEM No.28
Specifications for Digital water bath
Water Bath Circulating
Temperature range: 4-100 0C with digital microprocessor control
Capacity: 5-10 liters
Body: stainless steel
LCD display for set and actual parameters
Internal pump with speed regulation
CE certification
Safety: over temperature alarm, low water indicator
Stabilizer : 3 KVA stabilizer
Warranty: at least 2 years from the date of installation.
Optional: UPS online 3 KVA branded with 01 hrs back-up on full load.
No.5-61/2016-17/P&S/MKS
ITEM No.29
Technical Specifications of Gradient Thermocycler (PCR)
Gradient thermocycler with 3x32 or 2x48 well block or single 96 well block, testing 6 or more
different temperatures.
Heating and cooling via peltier technology.
Temp. control range 4 – 99°C, Lid Temp. range 37 – 100°C, Block Temperature accuracy
±0.2°C, Temp control speed 3 – 5°C/sec (heating), 3 – 4°C/Sec (cooling).
It should have ramp rate 6°C/Sec or more.
Customized programming allows 20 steps and 99 cycles.
Auto restart facility with user defined time interval when power fails and resumes.
Instrument status should indicate the step, cycle and remaining running during the run.
System memory of more than 100 user folders and upto 1000 programs.
At least two USB ports for protocol transfer, printer/mouse.
Power save standby function, 230 V, 50-60 Hz.
2 KVA online UPS with 30 – 60 min. of battery backup.
2 years warranty.
F.No.5-111/2016-17/P&S/SK
ITEM No.30
Specification for Elisa Reader
1. Wave length range= from UV to visible, i.e., 200 to 900 nm 2. Photometric with dual wavelength 3. Monochromatic grating system with adjustable wavelength without filter 4. Band width= minimum 5 nm 5. Accuracy= minimum ± 2 nm 6. Linearity= ≤ 2.0%, 0-3 OD at 405 nm 7. Reproducibility= ≤ 1 % 8. Compatibility= can read universal 96 well plate 9. Operating voltage= 230 -240 V/50 Hz 10.Recording and printing of data should have display through screen for
recording and printing facility and operation through computer and standalone both
11.Warranty: minimum 2 years from the date of installation 12.Original catalogue to support specifications 13.Compatible computer with software intel core i5 processor, 3.10 GHZ, 1 TG
HDD, HGW DDR IT CAM, Original Windows 7 Processor, 21” TFT Color monitor & color laser printer.
14. Compatible voltage stabilizer. Optional= AMC/CMC may be covered at least for 2 years post warranty period
F.No.5-11/2016-17/P&S/AK
ITEM No.31
Specifications for Inverted microscope phase contrast cell culture microscope with CCD
camera
1. Trinocular, Inverted, cell Culture, phase contrast Microscope with Infinity corrected optical
system
2. Eyepiece should be CW – 10X, field of view/F.N. at least 20, with diopter adjustment on both
eyes
3. Long working condenser (suitable for Bright Field & phase contrast Application)
4. Objective nosepiece to accommodate at least 4 objectives at a time with Universal Stage to
accommodate all types of specimen holders.
5. Interpupillary distance should be approx. 50-75 nm
6. Precentred or centering PH slider with 10X, 20X, 40X plan achromat objectives for phase
contrast
7. The microscope should be fitted with at least 2/3” CCD camera of at least 3.0 megapixels
alongwith image grabber Card. Data collection Unit should be a PC from a reputed make
that has latest specifications. This computer should also be supported by Image analysis
software for acquiring and analyzing pictures.
8. Microscope should be upgradable to fluorescence imaging capability for future use
9. Vendor should enclose ISO/CE conformity certification of quoted Microscope.
10. Vendor should enclose Satisfactory Installations list of quoted Microscope supplied in
premiere research institutes in India (at least 10 Installations).
11. Vendor must submit original brochure for verification of specifications conformity of
quoted Microscope in tender. Photocopy or computer print-out of catalogue will not be
accepted.
12. Vendor should give 3 years comprehensive warranty of the instrument and the attached
Accessories.
13. Microscope, camera and software should be from same manufacturer for optimum results.
14. Stabilizer (3 KVA) should be supplied with the equipment.
F.No.5-4/2016-17/P&S/AK
ITEM No.32
Technical Specifications of CO2 incubator
CO2 incubator with cooling system, Temp range-10°C below ambient to 50°C.
Capacity- 170-180 Ltr. (Air-Jacketed / Water-Jacketed).
UV lamp for contamination control, 90°C wet heat decontamination cycle, stainless steel
interior.
It should have CO2 control range from 0.2 to 20% with control accuracy and uniformity of
±0.1%.
Infra-red (IR) CO2 sensor with programmable auto-zero function provide superior accuracy &
stability for accurate detection of CO2 level.
Adjustable height shelves (minimum 4 in numbers) & humidity reservoir (removable) to
achieve at least 95% RH.
Should have digital display for set parameters with audio visual alarm.
It should have ULPA / HEPA filter on CO2 inlet.
One CO2 Cylinder with Regulator, 4 KVA Electronic Microprocessor based voltage stabilizer
(In Indian Currency).
Working power 230V, 50-60 Hz.
Warranty 02 years from date of installation.
F.No.5-68/2015-16/P&S/SK
ITEM No.33
Specifications for Thermal Cycler 1. Durable, independently controllable block of 96 wells 2. The Universal blocks can accommodate all kinds of PCR tubes preferably 0.2 ml or
0.5 ml PCR tubes with flat or domed caps and possibly PCR/microtitre plate 3. Gradient temperature range from 30–99°C 4. Heating and cooling of block must be through peltier technology 5. Block temperature control range at least between 4°C to 99°C or better 6. Heating rate: ≥ 3°C/s; Cooling rate: ≥ 2°C/s 7. Block Temperature Accuracy: ± 0.2°C or better 8. Block Homogeneity/Uniformity: ≤ ±0.3° C 9. Lid Temperature range: 37-110°C and should have over-tightening/pressure
protection system 10. Minimum reaction volume should be 10-25 µL 11. Should have display preferably LCD with touch screen/touch key pad 12. Memory: >500 typical programme on board 13. Auto restart facility in case of power interruption occurs before the completion of
reaction 14. Should have at least two USB ports for protocol transfer, printer and mouse 15. The machine should be duly certified by EN certification and/or ISO 9001-2000 &
CE Certification with the provision for calibration certificate. 16. The system should be supplied essentially with 3 KVA online UPS with back-up of at
least 2 hrs. on full load. 17. System should be supplied with split AC (2 tons) with appropriate suitable stabilizer
to maintained ambient temperature for smooth working of equipment. 18. Two years complete warranty 19. Original illustrated company catalogue of the instrument/equipment quoted is
must, which should be available on website. 20. Indian user list with name, address and contact numbers of the users.
No.5-75/2016-17/P&S/AK
ITEM No.34
Technical Specifications of Shaker Incubator
LCD display with microprocessor controlled temperature device with variation within ± 0.5°C.
Audio visual alarm for controlling temperature and RPM deviation from the set value.
Cabinet insulated with high density CFC free poly urethane foam.
Door should be provided with magnetic gasket and a keyed door lock.
Universal platform and holders for flasks/bottle, (500 ml, 1000 ml), test tube (15 ml) and
ELISA plates.
Temperature Range : 0 to 60oC, Temp Accuracy :± 0.5 oC,
Shaking Speed :20-300 RPM, Orbital, linear shaking
Working on power supply 220-240 Volts, 50 Hz.
One 4 KVA microprocessor based digital stabilizer.
Warranty – at least two years post installation.
Original information Brochure of the Instrument should be provided.
F.No.5-110/2016-17/P&S/SK
ITEM No.35
Specification for Cyclotec Grinding Mill (Feed Grinding Mill)
Ground material 0.5-1.0 mm particle size
F.No.5-63/2016-17/P&S/Ash
ITEM No.36
UV TRANSILLUMINATOR
Specifications:
Wavelength: 254-315 nm
Filter size: 150 X 150mm or more
Higher filter Lifetime
Protection against UV Radiation by cover
Adjustable UV protective shield provision
Adjustable dual intensity selector provision
Lower amount of infrared light
Stainless steel frame
Electrical operation: 230V / 50-60 HZ
Warranty : 02 Year from the date of installation
Catalogue : Original brochure to be provide
User list: 10 recent installations with phone no. & E mail IDs.
F.No.5-20/2016-17/P&S/AK
ITEM No.37
Specification for Heavy Duty Autoclave
1. Internal Tank capacity: Minimum 100 Liters
2. Temperature: 121°C-134°C
3. Pressure: Adjustable 15-20 psi
4. Inner wall: Made up of stainless steel
5. Outer wall: Made up of stainless steel
6. Heater: Immersion type
7. Gasket: Joint less rubber gasket
8. Lid: made up of stainless steel
9. Digital Temperature Indicator
10. Timer minutes: 0-60 minutes
11.Low water level indicator
12. Safety valves
13. Accessories for complete installation
14. Warranty: Minimum two years.
F.No.5-73/2016-17/P&S/AK
ITEM No.38
Technical Specifications for ICE FLAKING MACHINE
1. Ice Flaking Machine.
2. Production Capacity: at least 110-125 kg/Day or more.
3. Storage Bin Capacity from the same manufacture should have a capacity to store 40 Kg or more
Ice Flakes.
4. Automatic single switch operation.
5. Granular ice Flacks, 70-80% hardness.
6. Microprocessor computer control system.
7. CFC free Refrigerant.
8. Air Cooled Condenser.
9. Corrosions resistant interior and exterior with cabinet made of Stainless Steel.
10. Adjustable legs to keep the machine in level.
11. Power Requirement: 220-240V/50Hz
12. Visual Alarms Indications.
13. Suitable Voltage Stabilizer.
14. Warranty: Minimum 02 Years from the date of installation.
15. User List: India user’s list of 10 recent installations with valid contact details.
16. Catalogue: Authentic original company catalogue of the instrument.
ITEM No.39
Specification for Autoclave
1. Model: Fully programmable vertical autoclave.
2. Capacity: 50 Litres or more.
3. Pressure range: Adjustable 15-20psi.
4. Controller: Microprocessor PID
5. Display: LCD
6. Purging: Automatic
7. Exhaust: Automatic
8. Application/Use: Programmable un-attended operation
9. Lid: Single lever/Radial/sliding/top open with silicon gasket.
10. Safety: Overpressure valve, Low water detection sensor with auto-cutoff.
11. Buzzer: End of programme buzzer.
12. Material internal: Stainless Steel
13. Material External: Stainless Steel
14. Carrier basket: Perforated stainless steel basket.
15. Movement: Castor wheels
16. Certification: CE certified.
17. Electrical Operation: 220-240V/50-60 Hz
18. Warranty: Minimum 02 years from the date of installation
19. User List: Indian user’s list of 10 recent installations with valid contact details.
20. Catalogue: Authentic original company catalogue of the instrument.
ITEM No.40
Specifications for Plate Reader
Fully programmable, Filter based or Monochromator based Microplate reader with capability to
read samples in microplates.
1. The system should be capable of providing readings as stand-alone with internal machine
software and on-board display on screen or must be capable of connecting with computer
for taking readouts
2. The analysis software must be provided essentially with system.
3. Filter based or monochromator based selection of desired wavelength in the range :
≤400nm to ≥700nm.
4. In case of filter based models filters with wavelength 405, 415, 450,490,595, 655 and
750nm are to be provided with machine. Other filters may be quoted as optional
5. Wavelength bandwidth ≤ 10nm
6. Must enable fast plate measurements : upto 20sec for 96 well plate
7. Linear shaking/mixing feature for microplate platform
8. Warranty: Atleast two years from the date of installation
9. Original brochure/catalogue with technical details and users list to be provided with the
bid
10. Must have provision for inbuilt thermal printer or attaching external printer for taking
readouts
Optional accessories
1. Branded desktop PC with latest configuration available in the market to install the analysis
software
2. One black laser printer to print the result reports
3. 2KVA online UPS to provide atleast one hour power backup
ITEM No.41
Specifications for -80°C Deep Freezer
1. TYPE: Vertical: (Upright)
2. Operating Temperature: -80C to -86C
3. CAPACITY : 100 litres or more
4. Should have two compressors working in cascade for maximum heat removal and quick recovery
to set temperature
5. System should have stainless steel interior and tough, powder coated exterior finish constructed on
steel gauge
6. Should preferably have two independent lockable doors with three to four inner compartment
7. Freezer should have insulated inner doors giving separate access to individual shelves with
provision for adjusting the height of shelves
8. Fully programmable microprocessor controlled eye level display of temperature parameters as a
standard part of machine
9. Thick insulation on cabinet door and lid to ensure uniform cooling and triple point silicon gasket
on the doors for tight sealing to avoid formation of ice crystals
10. Built-in automatic high and low voltage compensator. Compressor should be capable to run on any
voltage between 190 – 270V
11. Audible and visible security alarms for deviation from set temperature, power failure, probe
failure, system failure, clean filter and door open
12. Freezer must have ISO 9001-safety requirements and IEC 61010 Electrical safety CE certified
(certificate to be provided along with bid).
13. Freezer must use CFC-FREE, HCFC-FREE non flammable refrigerants, and refrigeration system
must be energy efficient
14. Along with each deep freezer, one air conditioner of at least 1.5 tonne should be supplied
essentially to maintain the ambient temperature at around 25oC especially in the summer months so as
to enable the equipment to attain the ultra low temperature (-80 to -85oC) without putting extra load on
the compressor and avoiding the heating of condensers and compressors during summer months when
the ambient temperature shoots upto > 40oC.
15. The instrument should be essentially accompanied with a compatible servo voltage stabilizer
16. The instrument should operate on a single phase current with a voltage of 220 volts and 50Hz
17. Warranty of at least two years should be provided on the equipment
18. Literature/ manuals needs to be provided to support the technical specification of the model quoted.
Also provide original literature .
(Sameer Shrivastava)
ITEM No.42
Specifications for Ultra High Performance Liquid Chromatograph
PART-I
Solvent delivery System Number of Solvents : One to four in any combination Operation : Quaternary gradient system Compressibility compensation: Automatic and Continuous Maximum Operating Pressure: 15000 Psi or more at 1ml/min Flow rate range : 0.01 to 2.000 mL/min. with 0.001mL/min. increment. Flow rate Precision : 0.075% RSD Flow rate Accuracy : ±1.0% Safety Feature : Leak Sensors
Auto Sampler
Maximum Operating Pressure: 15000 Psi or more Injection vol. range : 0.1 to 50 µL in 0.1 µL increments Operating temp range : 4ºC to 40ºC No. of Sample : Minimum 90 vials of 2 mL Injection volume precision : 0.5% RSD Sample Carryover : <0.005% Safety Feature : Leak Sensors
Photo Diode Array Detector
Wavelength Range : 190-800nm Wavelength Accuracy : ±1nm or better Optical resolution : 1.2 nm or better Linearity range : 2.0 AU ≤5.0%, Base line noise : +1x10-4 AU Drift : ≤1.0x10-3/AU/Hr Data acquisition rate : 80 Hz or more.
Column Oven
Column Temp range : 5ºC above ambient to 80ºC Temp Accuracy : ±1.0ºC
Degasser
Degassing unit should have four or more flow lines.
Software
Latest genuine & original software. Single Point Control Software for complete system. Programmable Report Formats with inbuilt formulas & calculations
Other components required
C18 column (2.1 x 100 mm x 1.7 micron): 1 No C8 column (2.1 x 100 mm x 1.7 micron): 1 No Latest version computer system with LED monitor and Inkjet Color printer of reputed company 5KVA Online UPS with minimum 1 hour backup on full instrument load. Sample vials minimum 100 pcs.
Installation & Warranty
Minimum 2years complete warranty should be provided with 24x7 service on call basis. Complete installation and training must be provided. PART-II OPTIONAL ITEMS:
Refractive Index Detector Refractive index range : 1.00 to 1.75 RIU Noise : Max 2.5x10-9 RIU Drift : Max 2.0x10-7RIU/Hr Flow cell volume : 9 µL or less Flow cell Pressure : 250 Psi or less
Fluorosence Detector
Wavelength Range : 200 to 650 nm Spectral band width : 20 nm Wave length accuracy : ±2nm Wave length Repeatibility : ±0.25 nm or better Sensivity : S/N ˃1000 Raman spectrum of water Flow cell volume : 3µL or less
F.No.5-113/2016-17/P&S/MKS
ITEM No.43
Specifications for Gas Chromatograph PART-I
1. Column Oven: Oven capacity : Minimum 10 Litre
Temperature range : Ambient+5°C to 450°C or better
Temperature accuracy : ± 1%
Temperature deviation : Max 2°C
Temperature program steps : up to 20 with cooling program
Cooling rate : 450°C to 50°C in 4 min. or better
Column capacity : Two columns
2. Injection System:
Injector capabilities : Split/Splitless
Injectors Installed : Min 2 units
Temperature range : 400°C or better
Split ratio : Up to 75000:1 or better
Pressure : ˃700 KPa
3. Detectors: Should be capable is accommodates two detectors (FID & NPD) simultaneously
A. FID (Flame Ionization detector)
Temperature range : up to 400°C or better
Minimum detectable level : < 3pgC/s for dodecane
Dynamic range : ˃107
Flame out detection and automatic re-ignition facility
B. NPD (Nitrogen phosphorus detector)
Temperature range : up to 400°C or better
Minimum detectable level : < 0.4pgN/s for Azobenzene
< 0.2pgP/s for Malathion
Dynamic range : ˃103
4. Auto Sampler, Cylinders and Syringes:
Advance auto sampler for maximum sampling capabilities with minimum 3 syringe
size and minimum 100 sample positions.
Hydrogen, Nitrogen gas and zero air filled cylinders with regulators.
Two set of liquid syringe (5 and 50µl).
5. Columns:
Two numbers Capillary columns (One polar and another non polar) for analysis of drug and
pesticide residues in animal products.
6. Software:
Latest genuine & original software.
Single Point Control Software for complete system.
Programmable Report Formats with inbuilt formulas & calculations.
7. Other Components required :
Gas purification and control panel for all gases with moisture, hydrocarbon and
dedicated oxygen filter.
5KVA online UPS with minimum 1 hour backup on full instrument load.
Latest version computer system with LED monitor and Laserjet printer with scanner
of reputed company.
Sample vials minimum 100 pcs.
1.5 ton window A/C from a reputed company for proper temperature control of Gas
chromatography system.
8. Installation & Warranty:
Minimum 2years complete warranty should be provided with 24*7 service on call
basis.
Complete installation and training must be provided.
PART-II
Optional Item: ECD (Electron Capture detector)
Temperature range : up to 400°C or better
Minimum detectable level : < 0.1pg/s for Ƴ-BHC
Linear dynamic range : ˃104 F.No.5-114/2016-17/P&S/MKS
ITEM No.44
SPCIFICATION FOR HIGH SPEED CENTRIFUGE
Table top refrigerated centrifuge with capacity to hold 4x100mL
Works at temperature range between –10°C to + 40°C
Having dynamic compressor control system for better cooling performance.
Having options for short period spin, fast cooling and stand-by cooling
Having memory to operate more than 25 program.
Having fitted with condensation drain for avoiding water accumulation as well as corrosion.
Having arrangement in both the rotors (fixed angle and swing out) to accommodate round bottom tubes as well as falcon tubes.
Required rotors with centrifuge - One Fixed angle rotor (24/30/48x1.5/2mL) aerosol tight with metallic lid and 13000 rpm & 19000xg; Swing out rotor for 4x100mL with 4500xg, 5000 rpm with buckets & adaptors for 4x50/15mL; Fixed Angle Rotor for 6x85mL with adapter for 15mL & 50mL with 11000 rpm & 15500 xg
Having minimum noise levels and preferably less than 60dB(A)
Having motorized lock, automatic rotor identification and imbalance detection
Provide user list and installation certificates
On-site warranty of at least one year from date of installation
F.No.5-115/2016-17/P&S/Ash
ITEM No.45
SPECIFICATIONS FOR ORBITAL SHAKER
- Bench top microprocessor controlled orbital incubator shaker - Having temperature control range from 15°C below ambient to 50°C, with an accuracy of
±0.1°C. - Having shaking speed from 100 – 400 rpm with an accuracy of ±2 rpm. - It should have facility of smooth acceleration/deceleration to prevent sudden starts/stops. - It should have timer of 0.5 to 99 Hrs. - Having wide display screen showing speed, running time, alarm condition and temperature. - It should be quiet, vibration free and reliable operation at higher loads and speeds. - It should have audible and visible alarms - The system should have RS-232 port for Data Logging. - The system should have facility to calibrate the temperature and speed. - All equipment’s electronic and mechanical parts should be enclosed. - It should have automatic restart after power interruption. - It should have open lid cut-out switch stop agitation when chamber is open. - Having universal platform of 45 cm x 45 cm size with capacity to hold various flask size. - It should be supplied with 250 ml clamps (5 Nos.), 500 ml clamps (05 Nos), made up of single
piece without any welding etc. - It should meets CSA, UL & CE standards. - On-site warranty for one year from date of installation - Provide user list and installation certificates F.No.5-116/2016-17/P&S/Ash
ITEM No.46
Specification for SERVER Processor
Intel® Xeon® processor E5-2600 v4 product family
No. of Processor - One
Processor sockets: 2 Operating system Compatibility
Microsoft® Windows Server® 2008 R2
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft® Windows Server® 2016
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux Memory
32GB DDR 4 Storage
Minimum 2 TB SAS Hot Plug Expansion Slots
Minimum 3 x PCIe expansion slots, Storage Controllers
Integrated RAID Controller
Should support RAID 0,1,5,10,50
Should support Hot-Plug SAS Network Controller
4 x 1 GbE Power
hot-plug redundant power supply; Availability
ECC memory
Single Device Data Correction (SDDC)
Spare Rank
Support for HA clustering
Virtualization-ready
Internal Dual SD Module (Failsafe Hypervisor) Video Card
Integrated Graphics Card with 16 MB shared Memory Chassis
2u rack: Monitor
18.5” LET TFT Monitor Addition Accessories
Keyboard
Mouse
F.No.5-117/2016-17/P&S/SK
ITEM No.47
Specifications for Vacuum Pump 1. Model: Two stage Rotary Vane Vacuum Pump 2. Displacement capacity: About 90 L/ minute 3. Vacuum (partial pressure): 2 x 10-3 mbar (1.5 micron) 4. On/ off switch: Yes 5. Inlet adapters: 02 No (1/2” and ¾” OD) 6. Mode Selection: High vacuum and high throughput 7. Gas ballast: 03 position (Closed, Low Flow And High flow) 8. Motor: Single phase direct drive motor, totally enclosed and Fan
cooled. 9. Safety Features: Motor overheat, thermal Overload device
switches off the pump and automatic restart after pump Cools down, Isolation valve seals the inlet to prevent oil and air Contamination of the system in the event of power failure.
10. Material: Cast aluminum casting with rubber feet. 11. Handles: Lifting handles. 12. Accessories: Includes 04 liter of vacuum pump oil, 01 exhaust filter
with oil mist and odor filter elements. F.No.5-118/2016-17/P&S/SK
ITEM No.48 Specifications for MICRO SURGERY UNIT
1. Should have eyepiece of 10X (Option 12.5X)
2. Should have binocular tube with 45 degree/180 degree inclined tube, f=150-200mm.
3. Should have magnification changer with 1:6 and magnification 0.4X, 0.6X, 1X, 1.6X, 2.5X
4. Should have objective f=200mm (option f+175mm) and with motorized focussing
5. Should have mobile floor stand on wheels.
6. Should have counter balance suspension arms systems.
7. Should be supplied with 100-250 Volts and 40-60 VA power.
8. Should have LED light source with focusing rating of 2A or 3A, day light adjustable and
integrated near coaxial red glow illumination system.
9. Should have yellow, retinal guard and integrated each filter.
10. Should have X-Y coupling.
11. Should have push button for initial position of X-Y
12. Should be provided with sterilizable caps (1Set) and dust cover. (1)
13. Warranty of atleast 1 year should be quoted.
F.No.5-119/2016-17/P&S/MKS
ITEM No.49
Specifications for Bedside Monitor
1. High resolution TFT monitor.
2. It attachment should have the Facilities for recording ECG, Heart Rate, Respiration,
Temperature, SPO2.
3. Noninvasive Blood Pressure monitor.
4. Audible and Visual Alarms with Adjustable alarm ranges.
5. Graphic display of parameters.
6. Option for electrical and battery operation with Rechargeable batteries and 0.5
KVS Stabilizer.
7. Built Thermal Printer.
8. Accuracy 90-100%
F.No.5-120/2016-17/P&S/AK
ITEM No.50
Specification of LFA printer
1. Minimum Print length of machine: 25cm
2. Number of Printing heads : Minimum 02
3. Minimum working volume : 100 µL
4. Voltage : 220V, 50 Hz
5. Provision for variable speed for controlled dispensing.
F.No.5-121/2016-17/P&S/AK
ITEM No.51
Technical Specifications of Gradient thermo cycler (PCR)
1. Gradient thermo cycler with 3x32 or 2x48 block or single 96 well block, PCR Plate, testing 6 or more
different temperatures.
2. Heating and cooling Via peltier technology.
3. Temp. control range 4- 99oC, Lid Temp. range 37-100oC, Block Temperature accuracy ±0.2oC, Temp
control speed 3-5oC/sec (cooling.)
4. Display: LCD with touch pad or touch screen.
5. Customized programming allows 20 steps and 99 cycles.
6. Auto restart facility when power fails and resumes.
7. Instrument status indicates the step, cycle and remaining running during the run.
8. System memory of more than 100 user folders and up to 1000 programs.
9. At least two USB ports for protocol transfer, printer/mouse.
10. Power save standby function, 230 V, 50-60 Hz.
11. 3 KVA online UPS with at least 1 hr. backup on full load.
12. 2 Years warranty from the date of installation.
F.No.5-122/2016-17/P&S/SK
ITEM No.52
Specifications for Gel Doc System along with UPS and DNA software
Gel Doc System (One Unit)
1) System should have image resolution >4 mega pixels for resolving closely spaced bands on a gel or blot.
2) System should have (4-5) x (4-5) µm pixel size &>3.0 orders of linear dynamic range
3) System should be completely automatic & user does not have to zoom, focus, adjust aperture or select
light source.
4) System should be modular with different sample trays & flexible to image a wide variety of applications,
including acid, visible dyes and stain free gels.
5) System should have UV and white light.
6) System should have Stain-Free capability for stain-free gels and bolts.
7) System should require only one emission filter to accommodate a large portfolio of detection methods
viz, ethidium bromide, SYBR® Green, SYBR® Safe, SYBR® Gold, Gel Green, Gel Red, Fast BlastTM, SYPRO
Ruby, FlamingoTM, OrioleTM, CY3, rhodamine, green fluorescent protein, Hoechst, Krypton, silver stain,
copper stain, zinc stain, Coomassie, Brilliant Blue, Coomasste Flour Orange, and other spectrally similar
stains, labels, and dyes.
9) Should have lens flat-fielding calibration for each sample tray to deliver image data that are always
optimized and reproducible without imaging artifacts, providing superior image uniformity and
quantitation.
10) System should be compact with small footprint.
Gel Doc System Software and Operating System
1) Software should have automation in hardware calibration, image optimization, capture, and analysis.
2) Should have automated workflow recorded in a protocol file from image capture to results.
3) Fast, and completely reproducible workflow.
4) Should have automated image capture driven by a selected gel or blot application.
5) Should have one-button acquisition from image capture to result.
6) Software should have easy copy/paste functionality, crop, zoom, 3D and colors.
7) One portable data recording and storage device with minimum specification of minimum 3 GB RAM, 500
GB HDD, 15.6” Screen, DVD RW, Windows Operating System having high end specification to run the
software smoothly as well as data recording and analysis.
Optional Accessories:- 3KVA Online UPS for uninterrupted functioning of Gel Doc System with 1 hr.
backup.
F.No.5-123/2016-17/P&S/Ash
ITEM No.53 TECHNICAL SPECIFICATION OF PHACOEMULSIFICATION APPARATUS/SYSTEM
Pump-Peristaltic Pump
Fluidics
i) Closed Fluidic System, No Internal Tubings
ii) Aspiration: 0-50 cc/mm
iii) Maximum vacuum of 500 mmHG
iv) Vacuum and Aspiration Control – Programmable Linear control Or Panel Control
v) Reflux: Gravity Fed; Eliminates Contamination
vi) Venting: Fluid Venting System
Ultrasound:
1. Micro pulse Technology available in both mode- continuous Mode of Ultra sound and
within Pulse mode of
2. Ultrasound power delivery system.
3. Auto Tuning Mode
4. Ultrasound Frequency 40 KHz
5. Handpiece should have ability to drive cold phaco
Different types of pulses are available like short pulses, long pulses, power pulses with
adjustable no of pulse
Micro Pulse (Max 100 Pulses adjustable) in both modes continuous mode and pulse mode of
ultrasound power delivery system.
Programmable Occlusion Mode
Flow, vacuum and ultrasound simultaneously and automatically change as phaco tip sense the
vacuum at phaco tip and machine automatically control Occlusion building and breaking process.
Tubing Pack Options
- Both reusable & disposable tubing options should be available.(one additional) Phaco tip (2 Extra)
Anterior Vitrectomy
TAC Vitrectomy probe with max cutting 50-700cuts/min, Re-usable, Oscillating, Autoclavable.
Phaco Handpiece
Digitized lightweight phaco handpiece – 4 crystal
DIATHERMY SPECIFICATIONS
Power Adjustment: 5 to 100%, in 5% increments
Diathermy Power: 10 Watts into 100-Ohms
Frequency: 386 KHz
Diathermy Type: Bipolar
Power Delivery: Linear, Burst, or Panel
Display- Should have LCD touch screen panel
Memory- 5(add) Surgeons setting can be stored
Foot-Pedal
Programmable Detents and side switches.
Feedback: Vibration Detent
Should be supplied with all accessories including mobile trolley
Warranty: 2 Years
F.No.5-124/2016-17/P&S/SK
ITEM No.54
Technical Specifications for Biosafety Cabinet, Class-II, A2
1. Type: Class II, A2 (70% recycle, 30% exhaust), Vertical
2. Working area: 4.0 ft x 2 ft. (W x D)
3. NSF49 Certified.
4. < 56 decibel noise emission.
5. UV protected side glass. (model with SS side panel may also be quoted)
6. Stainless steel body
7. Dynamic chamber with negative pressure surrounding contaminated positive pressure plenum.
8. Dual, long life HEPA/ULPA filters for supply and exhaust airflow
9. Microprocessor control for supervision of all cabinet functions.
10. Sliding/openable front panel/ Frameless, shatter proof sash with automatic UV shut-off on sash
opening
11. Interior work area of a single piece of stainless steel with side Glass and SS work surface.
12. Removable stainless-steel single-piece work surface with large radius corners for easy cleaning
of chamber underneath the work surface.
13. Built-in high efficiency ECM centrifugal blower, germicidal UV lamp, choke-less fluorescent
lamp, one service fixer for gas inlet, 2 electrical sockets (15/5 amp) and support stand with
wheels.
14. Three years warranty
15. Equipment supplied with one 1.5 ton split Air Conditioner to maintain ambient room temperature
during summer
16. Online UPS back up for at least 30 min.
F.No.5-125/2016-17/P&S/MKS
ITEM No.55
Technical Specifications for Circulating Water bath
1. Circulating water bath with integrated refrigeration unit
2. Bench top compact space saving model
3. Temperature range -20° to at least 110°C
4. Quiet operation, < 65 dBa
5. Filling volume of 4.5 to 7 Liters
6. PID Digital temperature control
7. Temperature stability up to ±0.05 °C
8. Over temperature cut off
9. Low water cut off
10. LED temperature display
11. With Timer
12. Pump capacity flow rate: at least 12 L/min
13. Stainless steel bath tank & lid
14. With drain tap for easy cleaning
15. With removable ventilation grid
16. Class III (FL) safety according to DIN 12876-1
17. Warranty: At least 1 year
18. User List
19. With suitable voltage stabilizer
20. All accessories required for installation of water bath should be provided by the bidder.
F.No.5-126/2016-17/P&S/AK
