CRITICAL DIMENSIONS (DO NOT SCALE) Specifications FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com Benton™ Single Handle High Arc Pull Out Kitchen Faucet Models: 87211 series NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 1 OR 3 HOLE, 1-1/2" (38mm) MIN. DIA. 10" 15-13/16" (401mm) 10-1/4" (260mm) 8-7/16" (214mm) (255mm) MAX. DECK THICKNESS 2-1/2" (64mm) 2-5/8" (66mm) 9-7/8" (250mm) Rev. 4/15 DESCRIPTION • Metal construction with various finishes identified by suffix • Duralock™ quick connect installation • Pulldown spray with 68” braided hose • 1/2" IPS connections will accept standard ball nose connection (for 3/8” tubing) • High arc spout provides height and reach to fill or clean large pots while the pull out wand provides the maneuverability for cleaning (or rinsing) • Soap dispenser included with 87211SRSSD OPERATION • Lever style handle • Operates with less than 5 lbs. of force • Operates in stream or spray mode in the pullout or retracted position FLOW • Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi CARTRIDGE • 1255™ Duralast™ cartridge for Single-Handle Faucets • Engineered polymers, non-ferrous and stainless steel materials STANDARDS • Third party certified to IAPMO Green ASME A112.18.1/CSA B-125.1 and all applicable requirements referenced therein including NSF 61/9 & 372 • Meets CalGreen and Georgia SB370 requirements • Contains no more than 0.25% weighted average lead content • Complies with California Proposition 65 and with the Federal Safe Drinking Water Act • ADA for lever handle • The backflow protection system in this device consists of two independently operating check valves, a primary and a secondary which prevent backflow WARRANTY • Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser • 5 year warranty if used in commercial installations There is more than 1 version of this model. Page down to identify the version you have.

Specifications - Moen · CRITICAL DIMENSIONS (DO NOT SCALE) Specifications FOR MORE INFORMATION CALL: 1-800-BUY-MOEN Benton™ Single Handle High Arc Pull Out

Download PDF Report

Upload
lengoc
View
220
Download
0

Embed Size (px)

Citation preview

CRITICAL DIMENSIONS(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

Benton™Single Handle High Arc Pull Out

Kitchen Faucet

Models: 87211 series

NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLEDTHRU 1 OR 3 HOLE, 1-1/2" (38mm) MIN. DIA.

10"

15-13/16"(401mm)

10-1/4"(260mm)

8-7/16"(214mm)

(255mm)

MAX. DECK THICKNESS2-1/2" (64mm)

2-5/8"(66mm)

9-7/8"(250mm)

Rev. 4/15

DESCRIPTION• Metal construction with various finishes identified by suffix • Duralock™ quick connect installation• Pulldown spray with 68” braided hose• 1/2" IPS connections will accept standard ball nose connection (for 3/8” tubing)

• High arc spout provides height and reach to fill or clean large pots whilethe pull out wand provides the maneuverability for cleaning (or rinsing)

• Soap dispenser included with 87211SRSSDOPERATION• Lever style handle• Operates with less than 5 lbs. of force• Operates in stream or spray mode in the pullout or retracted positionFLOW• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi CARTRIDGE• 1255™ Duralast™ cartridge for Single-Handle Faucets• Engineered polymers, non-ferrous and stainless steel materialsSTANDARDS• Third party certified to IAPMO Green ASME A112.18.1/CSA B-125.1 andall applicable requirements referenced therein including NSF 61/9 & 372

• Meets CalGreen and Georgia SB370 requirements• Contains no more than 0.25% weighted average lead content • Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

• ADA for lever handle

• The backflow protection system in this device consists of twoindependently operating check valves, a primary and a secondary whichprevent backflow

WARRANTY• Lifetime limited warranty against leaks, drips and finish defects to theoriginal consumer purchaser

• 5 year warranty if used in commercial installations

There is more than 1 version of this model.Page down to identify the version you have.

CRITICAL DIMENSIONS(DO NOT SCALE)

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOENwww.moen.com

Benton™Single Handle High Arc Pull Out

Kitchen Faucet

Models: 87211 series

NOTE: THIS FAUCET IS DESIGNED TO BE IN STALLEDTHRU 1 OR 3 HOLE, 1-1/2" (38mm) MIN. DIA.

10”

15-13/16”(401mm)

10-1/4”(260mm)

8-7/16”(214mm)

(255mm)

MAX. DECK THICKNESS2-1/2” (64mm)

Rev. 2/12

DESCRIPTION• Metal construction with various finishes identified by suffix • Quick connect installation• Pulldown spray with 68” braided hose• 1/2" IPS connections will accept standard ball nose connection (for 3/8” tubing)

• High arc spout provides height and reach to fill or clean large potswhile the pull out wand provides the maneuverability for cleaning (or rinsing)

OPERATION• Lever style handle• Operates with less than 5 lbs. of force• Operates in stream or spray mode in the pullout or retracted positionFLOW• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi CARTRIDGE• 1255™ Duralast™ cartridge for Single-Handle Faucets• Engineered polymers, non-ferrous and stainless steel materialsSTANDARDS• Third party certified to IAPMO Green ASME A112.18.1/CSA B-125.1 andall applicable requirements referenced therein including NSF 61/9

• Meets CalGreen and Georgia SB370 requirements• Contains no more than 0.25% weighted average lead content • Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

• ADA for lever handle

• The backflow protection system in this device consists of twoindependently operating check valves, a primary and a secondarywhich prevent backflow

WARRANTY• Lifetime limited warranty against leaks, drips and finish defects to theoriginal consumer purchaser

• 5 year warranty if used in commercial installations