SPECIFICATIONS - Acuity Brands. PEERLESS LIGHTING ... Bruno Project: ... Peerless Lighting reserves the right to change materials or modify the design of its product without notification

CATALOG NUMBER

AVAILABLE FIXTURES

SPECIFICATIONS

ORDERING LOGIC

S P E C I F I C A T I O N S

PEERLESS LIGHTING • Box 2556, Berkeley, CA 94702-0556 • Tel: 510.845.2760 • Fax: 510.845.2776 • peerless-lighting.com

_________ _________ _________ _________ _________ _________ _________ _________ FT _________ _________ _________ _________ _________ _________ _________ _________ _________ _________ ____________________

BRM4 1 T8 WHR

BRM4 3 T8 WHR

BRM4 2 T8 WHR

BRM4 1 T8 WHR

BRM4 3 T8 WHR

BRM4 2 T8 WHR

BRM4 1 T8 WHR

BRM4 3 T8 WHR

BRM4 2 T8 WHR

Type: ________________________

Project: ______________________

Use guide below to order complete fixture runs from four feet to one-hundred feet in increments of four.

© 2008 Acuity Brands Lighting, Inc. All Rights Reserved. “Peerless” is a registered trademark, and “Bruno” is a trademark of Acuity Brands Lighting. Products in this brochure may be covered by one or more U.S. Patents and Patents Pending. Peerless Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.

1 11⁄16”

8 1⁄4”

BRM4 - 1 BRM4 - 2 BRM4 - 3

1⁄2”

1 11⁄16”

8 1⁄4”1⁄2”

1 11⁄16”

8 1⁄4”1⁄2”

Bruno®

Indirect / Direct T8

Pendant Mount — Modular / 8” X 2” Rectangular BRM4

Examples: BRM4 2 32 SPR 40FT R8 277 GEB10 DCT LP835 F1/18 SCEP — BRM4 3 32 SPR 32FT R8 277 GEB10 1SE EL DCT LP835 F1/21

ConstructionHousing is a nominal 8 1⁄4” x 1 11⁄16” rectangular channel formed from cold-rolled steel. 5⁄8” thick aluminum die cast end cap is standard, 4” sculpted die cast aluminum end cap is optional.

ReflectorsDie formed specular reflector with 95% reflectance.

ShieldingTwo choices: 1) Aluminum semispecular parabolic louver. 2) Optional white painted aluminum

parabolic baffle. Each available with optional acrylic opal overlay.

FinishFine textured white polyester powder paint is standard. Consult factory for special finish requirements.

ElectricalSpecify 120V, 277V, or 347V. Pre-wired with 16AWG fixture wire. For special circuiting or wire

gauge, consult factory. Plug-in electrical connectors included. UL and C-UL listed and labeled.

Fixture Length4’ 3⁄8” and 8’ lengths in a single section for nominal support spacing 4’-0” and 8’-0”. For total fixture length, add 5⁄8” for each flat end cap and 4” for each sculpted end cap. Using internal joiners, 4’ and 8’ sections can be joined to form longer rows. Consult factory for availability of 12’ length fixture section.

Notes:1 Must be in 4’ increments.2 Optional.3 EL and EC are installed in last 4’ of fixture sections and are not available concurrently

with each other. Separate feed required for each EL or EC unless ELS/ELH is specified.

4 Available with standard distribution only.5 Available with 3 lamp cross section only.6 Not available in 347 volt.

_________ _________ _________ ______________ ______________ ______________ ______________ ___________ FT ____________ _________ ________________ ______________

Fixture

BRM4

# of Lamps in Cross Section

123

Lamp Type

32

Distribution

Blank Standard 65/35

20/80 20% Up, 80% Down

40/60 40% Up, 60% Down

0/100 0% Up, 100% Down

CLI Center Lamp Isolater5

Reflector

SPR4 Specular Reflector

Shielding

BlankOPD Baffle

w/ std brightness diffuser/Opal overlay

Baffle

SSB Semi Specular Louver

WPB White Parabolic Baffle

Nominal Row Length1

Maximum Section Length

R4R8

Voltage

120277347

Ballast Type

GEB10 <10% THD ELECTRONIC

ADEZ6 Advance Mark 10 dimming

ECO106 Lutron ECO-10 dimmingADZT6 Advance Mark 7 0-10v

dimming

Reference Ballast Chart on website or consult factory for other options.

# of Emergency Modules2

Blank No Emergency

1SE 1 section2SE 2 sectionsXSE X sections

______________ ______________ ________________ ______________ / ______________ ______________ _________________________________

Emergency Type2,3

Blank No Emergency or Night Light

EL Emergency Battery Pack

EC Emergency / Night Light Circuit

EN Emergency Battery Pack with Night Light Circuit

Switching

SCT Single Circuit

DCT Dual Circuit

Lamp Color

L/LP No LampLP730 3000K 70+ CRILP735 3500K 70+ CRILP741 4100K 70+ CRILP830 3000K 80+ CRILP835 3500K 80+ CRILP841 4100K 80+ CRI

Reference Lamp Chart on website or consult factory for other options.

Mounting Type /

F1 T-Bar Ceiling (Universal Mounting Bracket)

F1A T-Bar Ceiling (UMB with Integrated J-Box)

F2 Hard Ceiling (Horizontal J-Box)

F3 Stem MountF4A IDS Clip 15⁄16” TeeF4B IDS Clip 9⁄16” TeeF4C IDS Clip Screw Slot

Overall Suspension

12 12” overall suspension15 15” overall suspension18 18” overall suspension21 21” overall suspension24 24” overall suspensionXX XX” overall suspension

Finish

C210 Standard White White (fine-textured low gloss)

C110 Painted to match Aluminum Finish

C099 Custom Color

Options

ACG Adjustable Cable GrippersAPF Alternate Power FeedCP Chicago PlenumDL Damp Location LabelDU Dust CoverELH EM Through wire w/ Separate FeedELS EM Through Wire w/ Single FeedGLR Fusing (Fast blow)GMF Fusing (Slow Blow)NYC New York City CodeSCEP Sculptured End Cap

BRM-15

http://www.peerless-lighting.com/info/?pg=ProductSupport

http://www.peerless-lighting.com/info/?pg=ProductSupport


P H O T O M E T R I C S


Type: ________________________

Project: ______________________Bruno®

Indirect / Direct T8Pendant Mount — Modular / 8” X 2” Rectangular BRM4

1-LAMP T8 WITH SPECULAR REFLECTOR AND OPD 1-LAMP T8 WITH SPECULAR REFLECTOR

2-LAMP T8 WITH SPECULAR REFLECTOR 3-LAMP T8 WITH SPECULAR REFLECTOR

BRM-16




Type: ________________________

Project: ______________________


Bruno®

Indirect / Direct T8 — 20/80 VDR

1-LAMP T8 WITH WHITE REFLECTOR 2-LAMP T8 WITH WHITE REFLECTOR

3-LAMP T8 WITH WHITE REFLECTOR

BRM-17




Type: ________________________

Project: ______________________


Bruno®




BRM-18




BRM-19

Type: ________________________

Project: ______________________


Bruno®




Documents

SPECIFICATIONS - Acuity Brands. PEERLESS LIGHTING ... Bruno Project: ... Peerless Lighting reserves the right to change materials or modify the design of its product without notification