Eureka Lighting © 2015 www.eurekalighting.com V1.0-201501

PROJECT PROJET

SPEC TYPE

NOTES

SPECIFICATION

CYCLE 4800-24 / 36ORDERING SPECIFICATION SPÉCIFICATION DE COMMANDE CODE

MODEL MODÈLE

4800-244800-36

CYCLE 24"CYCLE 36"

LIGHT SOURCE SOURCE LUMINEUSE

(WATTAGE, LAMP TYPE, OTHER INFO)

4800-24LED.24.30LED.24.40LED.48.30LED.48.40

4800-36LED.40.30LED.40.40LED.80.30LED.80.40

24W, LED 3000K (WARM)24W, LED 4000K (NEUTRAL)48W, LED HO 3000K (WARM)48W, LED HO 4000K (NEUTRAL)

40W, LED 3000K (WARM)40W, LED 4000K (NEUTRAL)80W, LED HO 3000K (WARM)80W, LED HO 4000K (NEUTRAL)

VOLTAGE VOLTAGE

120V277V347V

120 VOLT277 VOLT347 VOLT**ONLY AVAILABLE WITH 24 & 40W

DIMMING OPTION OPTION DE GRADATION DV

DV 0-10V DIMMINGLED DIMMING DRIVER IS STANDARD IN THIS PRODUCT

DRIVER POSITION POSITION DU PILOT

RDP RECESSED DRIVER**3981C ACCESSORY IS REQUIRED*ONLY AVAILABLE WITH 120V & 277V

CABLE CABLE AC

AC AIRCRAFT MOUNTING & CLEAR CABLE, FIELD ADJUSTABLE

CABLE LENGTH LONGUEUR DE CABLE

60**

60" AIRCRAFT CABLE (STD LENGTH)CUSTOM AIRCRAFT CABLE LENGTH (PLEASE SPECIFY)FOR OVERALL LENGTH PLEASE CONTACT YOUR EUREKA REPRESENTATIVE

MOUNTING OPTION OPTION DE MONTAGE RC

RC ROUND CANOPY / PAVILLON RONDFOR RECESSED DRIVER OPTION: 0.25" (2403B)FOR STANDARD: 1.75" CANOPY (2405H)

MOUNTING CABLE OPTION OPTION DE MONTAGE DE CABLE

IF NO OPTION IS SELECTED, AN OFF-CENTERED ROUND CANOPY WITH STRAIGHT AIRCRAFT CABLES IS STANDARD

RCARCC

CENTERED ROUND CANOPY - AIRCRAFT CABLES ANGLED TO CENTER*CENTERED ROUND CANOPY - STRAIGHT AIRCRAFT CABLES *NOT AVAILABLE WITH RECESSED DRIVER (RDP)

CANOPY FINISH FINI PAVILLON

WHMCHR

MATTE WHITE (ONLY FOR MATTE WHITE RING FINISH)CHROME (ONLY FOR ANTHRACITE FINE TEXTURE RING FINISH)

RING FINISH FINI ANNEAUX

WHMANTE

MATTE WHITEANTHRACITE FINE TEXTURE

OPTIONAL INSIDE FINISH OF EXTERNAL RING FINI INTERNE OPTIONNEL DE L’ANNEAU EXTÉRIEUR

IF NO FINISH IS SELECTED THE INSIDE FINISH OF THE EXTERNAL RING WILL BE WHITE

BLURED

BLUERED

ACCESSORY ACCESSOIRE

3981C JUNCTION BOX FOR RECESSED DRIVER OPTION

4800-24 (STANDARD)

4800-36 (STANDARD)

4800-24-RCC

4800-36-RCC

4800-24-RCA

4800-36-RCA

MOUNTING OPTIONS OPTIONS DE MONTAGE

Ø 23.30"Ø 592mm

64.00''1625mm 4.00''

102mm

Ø 35.33"Ø 897mm

64.00''1625mm 4.00''

102mm

Ø 23.30"Ø 592mm

64.00''1625mm 4.00''

102mm

Ø 35.33"Ø 897mm

64.00''1625mm 4.00''

102mm

Ø 23.30"Ø 592mm

64.00''1625mm 4.00''

102mm

Ø 35.33"Ø 897mm

64.00''1625mm 4.00''

102mm

2405HØ9.1” x 1.75”Ø231 x 44mm

2403B (RDP)Ø6.35” x 0.25”Ø161 x 6mm

FINISH OPTION FINI COULEUR

WHM-BLU WHM-RED ANTE-WH ANTE-BLU ANTE-RED

PRODUCT CHARACTERISTICS CARACTÉRISTIQUES DU PRODUIT

DESIGN: The perfectly diffused direct/indirect illumination of Cycle create a luminous halo that fills large spaces with presence and simplicity.

LIGHT SOURCE: Custom designed and manufactured light engine featuring high performance LEDs that deliver 500 lm/ft initial lumens in regular output or 1000lm/ft in high output.

STRUCTURE: Seamlessly finished, rolled concentric aluminium extrusions with highly reflective inner matte white polyester powder coating available with outer finish in matte white or textured anthracite. Inner finish insert available in blue or red for a colored glow.

CERTIFIED: c-CSA-us

4800-24 4800-364800-54 4800-72

ANATOMY CYCLE

V1.2-201504www.eurekalighting.comEureka Lighting©2015

4 VERSATILE SIZESAn infinite number of possible layoutsFrom the smallest to the largest space

CHARACTERISTICSLIGHT SOURCE

MODULE

DELIVERED LUMENS

CRISTRUCTURELIGHT DISTRIBUTIONVOLTAGE*DRIVER (DIMMING)LM-79WARRANTY

84x Nichia 757 ± 24W

UL Recognized - Custom design flexible strip - Made in USA

1120lm(3000K)/1160lm(4000K)

85 CRI (3000K) - 85 CRI (4000K)Custom CNC rolled aluminium extrusions (0.125in thickness) / Seemless weldingDirect/Indirect 50/50120V or 277V or 347*Meanwell 24CV 0-10V Dimming (standard with this fixture)In process5 years

4800-24 4800-724800-36 4800-54140x Nichia 757 ± 40W 224x Nichia 757 ± 64W 308x Nichia 757 ± 87W1860lm(3000K)/1935lm(4000K) 2980lm(3000K)/3090lm(4000K) 4095(3000K)/4250lm(4000K)

STANDARD CANOPY 9.0”X1.75“ Mounting on a 4” standard j-box

LOW PROFILE CANOPY 9.4”X0.25”Mounting on Eureka box 3981D (sold separately)For 4800-54/72 HORecessed driver for discrete installation

LOW PROFILE CANOPY 6.4”X0.25”Mounting on Eureka box 3981C (sold separately)Recessed driver for discrete installation

HANG IT STRAIGHT OR ANGLEDHole pattern provided for 0, 10, 20, 30 & 40°for easy installation

CANOPY OPTIONS

CANOPY POSITIONS

120V or 277V or 347* 120V or 277V or 347* 120V or 277V

LIGHT SOURCE (HO)DELIVERED LUMENS (HO)

168x Nichia 757 ± 48W2240lm(3000K)/2320lm(4000K)

280x Nichia 757 ± 80W 448x Nichia 757 ± 128W 616x Nichia 757 ± 174W3720lm(3000K)/3870lm(4000K) 5960lm(3000K)/6180lm(4000K) 8190(3000K)/8500lm(4000K)

4800-XXCentered with mounting point (standard)

4800-XX-RCACentered with luminaire / Centered cables

4800-XX-RCCCentered with luminaire / Straight cables

HEAT SINKCNC rolled aluminum extrusionWhite matte powder coating

OUTER REFLECTORCNC rolled alumium extrusionWhite matte powder coatingPerfectly diffused illumination

HIGH PERFORMANCE LED STRIPSCustom made module

Nichia 757 LED3000K or 4000K option

HO option

ROBUST SUPPORTCNC machined

aluminium blocksWhite matte power coating

3 CABLES SUSPENSIONEasy installation and adjustment

RING FINISHOPTIONS1) White matte2) Anthracite

STYRENE STRIP REFLECTOR OPTIONS1) White2) Blue (PMS #299)3) Red (PMS #199)

35 lbs 50 lbs 75 lbs 100 lbsWEIGHT (PACKED)*347V not availalbe for HO option

4800-24 4800-364800-54 4800-72

ANATOMIE CYCLE

V1.2-201504www.eurekalighting.comEureka Lighting©2015

Ø72”

Ø54”Ø36”

Ø24”

4 FORMATS POLYVALENTSUne infinité de combinaisons possiblesPour les petits aux plus grands espaces

PAVILLON STANDARD 9.0”X1.75“ Installation sur boîte de connexion 4” standard

PAVILLON PROFIL BAS 6.4”X0.25”Installation sur boîte 3981C (vendue séparément)Pilot encastré pour une installation discrète

PAVILLON PROFIL BAS 9.4”X0.25”Installation sur boîte 3981D (vendue séparément)Pour 4800-54/72 HOPilot encastré pour une installation discrète

SUSPENSION DROITE OU EN ANGLEGabarit de perçage de 0, 10, 20, 30 & 40°fourni pour une installation facile

POSITION DU PAVILLON

CARACTERISTIQUESSOURCE LUMINEUSE

MODULE

LUMENS REELS

IRCSTRUCTUREDISTRIBUTION LUMINEUSEVOLTAGE*PILOTLM-79GARANTIE

84x Nichia 757 ± 24W

Reconnu UL - Bandes DEL sur mesure - Fabriqué aux États-Unis85 IRC (3000K) - 85 IRC (4000K)Extrusions d’aluminium roulées par CNC (0.125po d’épaisseur) / joints de soudure invisiblesDirecte

Meanwell 24CV à gradation 0-10V (standard avec ce luminaire)En cours5 ans

4800-24 4800-724800-36 4800-54140x Nichia 757 ± 40W 224x Nichia 757 ± 64W 308x Nichia 757 ± 87W

1120lm(3000K)/1160lm(4000K) 1860lm(3000K)/1935lm(4000K) 2980lm(3000K)/3090lm(4000K) 4095(3000K)/4250lm(4000K)SOURCE LUMINEUSE (HO)LUMENS REELS (HO)

120V ou 277V or 347* 120V ou 277V ou 347* 120V ou 277V ou 347* 120V ou 277V

4800-XXCentré avec le point de montage (standard)

4800-XX-RCACentré avec le luminaire / Câbles centrés

4800-XX-RCCCentré avec le luminaire /Câbles droits

168x Nichia 757 ± 48W2240lm(3000K)/2320lm(4000K)

280x Nichia 757 ± 80W 448x Nichia 757 ± 128W 616x Nichia 757 ± 174W3720lm(3000K)/3870lm(4000K) 5960lm(3000K)/6180lm(4000K) 8190(3000K)/8500lm(4000K)

RADIATEUR THERMIQUEExtrusions d’aluminium roulées par CNCPeinture électrostatique blanche matte

RÉFLECTEUR EXTÉRIEURExtrusions d’aluminium roulées par CNCPeinture électrostatique blanche matteDiffuse parfaitement la lumière

BANDE DEL HAUTES PERFORMANCESModule sur mesure

DEL Nichia 757Option 3000K ou 4000K

Option HO

3 SUPPORTS ROBUSTES Blocs d’aluminiummachinés par CNC

SUSPENSION SUR 3 CABLESInstallation et ajustement faciles

OPTIONS POURFINITION DESANNEAUX1) Blanc matte2) Anthracite

OPTIONS POURRÉFLECTEUR DESTYRÈNE1) Blanc2) Bleu (PMS #299)3) Rouge (PMS #199)

CANOPY OPTIONS

35 lbs 50 lbs 75 lbs 100 lbsPOIDS (EMBALLÉ)

*347V pas disponible pour l’option HO