Embed Size (px)
Citation preview
www.colorbeamlighting.com
Tél: 844-301-CBNA (2262)450 Montée de LiesseMontréal, QC H4T 1N8 Email: [email protected]
SPECIFICATIONTAPE-60-RGB 4.32W/FT
TAPE-60-RGB
TAPE-60-RGB-IP68
LED Quantity: 60 LED/M
Color /CCT: RGB Bin/Step: 1 bin only, 4 step binningChip: EPISTAR
CRI: N/A
Luminousflux: 1200Lm/M
MaxPower: 14.4W/M
PCBwide: 10mm (IP 68 - WP 14mm)
Voltage: DC 24V
Current: 0.6A
Cut Length:50mm / 2’’ (3 LED) for 12 VDC100mm / 4’’ (6 LED) for 24 VDC
PCBSpecs: 10mm/5oz/WHT
Connection: 2*20AWG / RED’+’/ BLK’-
IPRating IP20/IP68Installation: 300LSE 3M tape
MaxRunLength: 5 meters (16.4FT/Roll)
Life Span: 50,000 hrs
Warranty: 5 years
Dimmable: Yes
Beam Angle: 120°
Certificate: CE, RoHS, UL
Packaging: 16.4 FT spool IP20= 120g/roll - IP68= 320g/roll
DESCRIPTION
• Double sided 3m tape backing• Low power consumption• Low heat emission• Available in IP20 or IP68• Easy to install
TYPICAL APPLICATIONS
√ Accent lighting √ Decorative lighting √ Architectural lighting
Colorbeam Lighting Inc. reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.
SPECIFICATION SHEET
TAPE-60-RGB
www.colorbeamlighting.com
Tél: 844-301-CBNA (2262)450 Montée de LiesseMontréal, QC H4T 1N8 Email: [email protected]
Colorbeam Lighting Inc. reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.
SPECIFICATION SHEET
TAPE-60-RGB
WARNINGS & SAFETY INSTRUCTIONS
Always turn off main power prior installation or modifications to prevent electrical shock. Damaged wires can cause electrical shock hazards. Keep any control or driver devices in dry and well ventilated locations. Keep away any control or driver devices from any heat source, corrosive, flammable or explosive area. Installation and wiring by qualified party. System is intended for installation in accordance with local electrical code. Do not open, modify or try to repair any device personally.
OPERATION DETERMINATIONS
If drivers have been exposed to drastic temperature fluctua-tion temperature, do not switch on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
ELECTRICAL & WIRING
Any electrical equipement and wire should be used at 80% capacity. Any wire gauge should reflect load and distance as well as environment.
DRV-SRPC2108-24-200CVF
DMX-24CH-SR-2108
DMX-24CH-SR-2108DMX Driver, 24 Channels, VDC, Constant Voltage* need external VDC power supply 12-24VDC input - 24x 4A output RBGW settable functinallity
COMPATIBLE CONTROLLERS
DRV-SRPC2108-24-200CVFDMX Driver, 100W, 4 Channels, 24V, Constant Voltage 5VDC 1A input DMX512 output 001 ~ 004 100-240VAC input 4x channel 24VDC output RGBW max 100W
www.colorbeamlighting.com
Tél: 844-301-CBNA (2262)450 Montée de LiesseMontréal, QC H4T 1N8 Email: [email protected]
Colorbeam Lighting Inc. reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.
COMPATIBLE EXTRUSIONS
TRACK-OP-002
TRACK-OP-013
TRACK-OP-010
TRACK-OP-035
TRACK-OP-004
TRACK-OP-014
TRACK-OP-011
TRACK-OP-036
SPECIFICATION SHEET
TAPE-60-RGB
