SPECIFICATION FOR APPROVAL...test unit temperature stabilized in the power off condition until at ambient temperature. 3.1.4 Power Consumption The power consumption shall not exceed

MODEL NO.: ADS0271-B 120167 SHEET NO. 1 OF 14

DESCRIPTION: Switching Power supply Unit ISSUE DATE: 29/10/2013

SPECIFICATION FOR APPROVAL

APPROVAL SIGNATURE

DATE:

CUSTOMER : TKT PART NO.: REV : 01 PLEASE SIGN AND RETURN ONE COPY. ALL PRODUCTION UNITS WILL BE BUILT ACCORDING TO THIS SPECIFICATIONS.

APPROVED CHECKED PREPARED

高友金唐林峰高歡

DATE: 2013/10/29 DATE: 2013/10/29 DATE: 2013/10/29

MODEL NO.: ADS0271-B 120167 AGENCY APPROVAL: CE, MEET RoHS SAMPLE NO.: TP1310050 DESIGN NO.:

PRESENTED BY: FILE NO.:

Atech OEM. lnc No.43,Sec. 4, Keelung Rd., Taipei City 10607, Taiwan, R.O.C.(AAEON Building, 7th floor) Tel: 886-2-2377-0282 Fax: 886-2-2377-0283 http://www. atechoem.com China factory1: OEM factory, Chun See lndustrial Zone,Shi Pai Zhen,Dongguan,Guangdong,P.R.China. Tel: 86-769-86925028 Fax: 86-769-86925089 E-mail: [email protected] China factory2: Qianjin Village Dan yang Economic Development,Zone of JiangSu Province,P.R.China. Tel: 86-511-6610666 Fax: 86-511-6610555 E-mail: [email protected]



NO. CONTENT PAGE 1.0 REVISION HISTORY 4 2.0 GENERAL 5 3.0 ELECTRICAL SPECIFICATION

3.1 Input Requirement 3.1.1 Input Frequency And Voltages 3.1.2 Input Current 3.1.3 Inrush Current 3.1.4 Power Consumption

3.2 Input Protection 3.2.1 Input Current Protection

3.3 Output Requirement 3.3.1 Output Voltage And Current 3.3.2 Short Circuit Protection And Over Current Protection 3.3.3 Output Polarity 3.4 Performance Requirement 3.4.1 Efficiency 3.4.2 Turn On Delay Time 3.4.3 Hold-up Time

5

4.0 ENVIRONMENTAL REQUIREMENTS 4.1 Temperature And Humidity 4.2 Altitude

6

5.0

REGULATION COMPLIANCE 5.1 EMC Specification 5.1.1 FCC Requirements 5.1.2 CISPR Requirements 5.2 Product Safety 5.2.1 Safety Approval 5.2.2 Leakage Current 5.2.3 Dielectric Voltage Withstand

6

6.0

RELIABILITY 6.1 MTBF (Mean-Time-Between-Failures) Calculation 6.2 Burn-in

7

7.0 MECHANICAL SPECIFICATION 7.1 Case Dimension 7.2 Dc Cord

7

8.0 LABEL SPECIFICATION 10 9.0 PACKING 11



10.0 SCHEMATIC CIRCUIT DRAWING AND PCB LAYOUT 12

11.0 TEST RECORD 11.1 Electrical characteristic test record

14

12.0 SAFETY FILE



1.0 REVISION HISTORY

DATE DESCRIPTION REVISION REMARK



2.0

GENERAL DESCRIPTION This specification defines the input, output characteristics and performance requirements for a 20 watts switching mode AC to DC adapter.

3.0

ELECTRICAL SPECIFICATION 3.1 Input Requirement

3.1.1 Input Voltages And Frequency

Normal Voltages Voltage Variation Range Normal Frequency Frequency

Variation Range 100-240VAC 90-264VAC 50-60Hz 47Hz to 63Hz

3.1.2 Input Current AC input current shall not exceed 0.6A MAX, when operated at 100-240VAC with no load to full load.

3.1.3 Inrush Current The inrush current must be limited to 50A when operated at 240VAC. Inrush current is measured at an ambient temperature of 25 ,with the ℃ test unit temperature stabilized in the power off condition until at ambient temperature.

3.1.4 Power Consumption The power consumption shall not exceed 0.3W when operated at normal

voltage 100-240VAC with no load. 3.2 Input Protection

3.2.1 Input Current Protection A fuse with a rating of 2A shall be installed on the input line side near the input connector to provided protection to the power supply.

3.3 Output Requirement 3.3.1 Output Voltage、Current And Ripple

Under any combinations of line and load variation and environmental conditions, output shall remain with in the tolerance defined in table 1

Input normal voltage

Output Nominal Voltage

Output Regulation

MinimumLoad (A)

Maximum Load( A)

Ripple (mVp-p)

Output power(w)

100-240VAC 12VDC ±5% 0.0 1.67 120 20 Note: 1. output voltages shall be measured at output connector.

2. Ripple measurements shall be made with an oscilloscope of at least 20 MHz bandwidth. Output shall be bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading at temperature 25℃.

3.3.2 Short Circuit Protection and Over Current Protection. The power supply shall be protected from damage of accidentally shorting output for a long time period or over current and auto-recovery when the fault is removed.



3.3.3 Output Polarity

PIN2

PIN1

3.4 Performance Requirement

3.4.1 Efficiency It should provide an average efficiency 81.0% minimum, when measured at 230VAC/50Hz, It’s meets the energy star level V and EUP2 requirements.

3.4.2 Turn On Delay Time The adapter shall switch on in less than 3.0 seconds at maximum load and 115VAC/50Hz input. The measurement shall be made from the point at whichcondition of input voltage start up to the point at which the output voltage goes up to the static regulation envelope specified.

3.4.3 Hold-up Time The hold-up time shall be a minimum of 10 ms at 115VAC/50Hz and 90%fullrated load. The measurement shall be made from the point at which conditionof input current ceases, AC power interrupt, to the point at which the output voltage drops below the static regulation envelope specified.

4.0

ENVIRONMENTAL REQUIREMENTS 4.1 Temperature And Humidity

4.1.1 Operating Temperature and Humidity Range: All operation requirements specified shall be meet the temperature range of 0℃ to 40℃, 20% to 90% relative humidity.

4.1.2 Storage Temperature and Humidity Range: The storage or transported specified shall be meet the temperature range of -20℃ to 70℃, 20% to 90% relative humidity.

4.2 Altitude The adapter shall operate properly at any altitude between 0~10,000 feet above sea level and withstand storage at 40,000 feet.

5.0

REGULATION COMPLIANCE 5.1 EMC Specification

5.1.1 FCC Requirements Power supply shall comply with the radiated and conducted emission requirements for FCC Class B.

5.1.2 CISPR Requirements Power supply shall comply with the radiated and conducted emission requirements for CISPR 22 Class B.

PIN# Output Level1 RTN(－) 2 +12V



5.2 Product Safety

Unless otherwise specified, the supply is designed to meet IEC 60950-1 editionand/or equivalent safety standards for use in information technology equipmentspecific agency certifications will be applied at customer’s request and cost. 5.2.1 Safety Approval

UL/Cul TUV/GS CE BSMI PSB GOST-R PSE CCC EK-mark Doft

5.2.2 Leakage Current The AC leakage current is less than 0.25mA when the adapter is connected to 240VAC/50Hz.

5.2.3 Dielectric voltage withstand The adapter shall withstand a 50/60Hz 3000VAC for 10mA(or 4242VDC for 10mA) supply voltage applied without breakdown between both input line and output, Primary AC pin short and output positive negative all short.

6.0

RELIABILITY 6.1 MTBF (Mean-Time-Between-Failures) Calculation The demonstrated MTBF shall be 6,5000 hours of continuous operation at

25 ,℃ maximum load and worst-case line. 6.2 Burn-in

The power supply shall be burn-in for 4 hours under nominal input and full load at ambient temperature of 40 degrees C.

7.0

MECHANICAL SPECIFICATION



7.1 CASE DIMENSION:

DATE CODE LABEL

SXXXXXXXXXX

▲

▲

▲

▲

▲

▲▲

▲

NOTE:MATERIAL:WHITE CHARACTER ON A CLARITY BACKGROUND

COMMISSARY:YEAR

COMMISSARY:WEEK CODE

COMMISSARY:PRODUCT CODE

4±0.1

27±0.2

SXXXX XXXXXX

XXXXXXXXXXS

COMMISSARY:FACTORY CODE (DAN YANG:D) (DON GUAN :S)

UNIT: mm



7.2 DC CORD



8.0 LABEL SPECIFICATIO

NOTE: LABEL ○1 SILVER CHARACTER ON A BLACK BACKGROUND WITH NON GLOSSY ○2 MATERIAL: METALIZED POLYESTER LABEL (SILVER MATTE) ○3 SIZE: (20.5*28.5)+0/-0.3 THICK: 0.25 ○4 DATE CODE XX XX WEEK YEAR ○5 “GP”SHOW : GREEN PRODUCTION ○6 UNIT: mm



9.0 PACKING

產品

10555

94

306

441

465

105

94

553

1

2

NOTE: ○1 BOX:L*W*H=(105*55*94)+/-2mm 450P ○2 CLAPBOARD:(440*420)*3+/-3mm B33 4PCS ○3 CARTON:L*W*H=(465*441*306)+/-5mm A=A ○4 Q’TY:32*3=96PCS ○5 NET WEIGHT: (g)(ref) ○6 UNIT: mm



10.0 SCHEMATIC CIRCUIT DRAWING AND PCB LAYOUT



12

34

ABCD

43

21

D C B ATi

tle

Num

ber

Revi

sion

Size A4

Dat

e:26

-Sep

-200

8Sh

eet

of

File

:D

:\ 李曉劍資料

\LX

J\PC

B\AD

S-02

51\A

DS0

251

REV

03.d

dbD

rawn

By:

U2-A

Q1

C1C

X1

F22A

/250

V

VR

1

L N

LF1

C8

C13

CY

1

C9

C11

16

25

34

U1

R2

R5

R11

R4

R3R

10

R1

D6

C2

R15

R12

T1R16

R18

R9

R13

R14D5

C7

D7

C4

C5

L3V

+ V-

C10

U3

R20

R21

C14

R19

R17

J1

U2-B

D8

L2

R22

C12

F1D

1D

3

D2D

4

D9

C3

R8

R7

R6

T1

R23

D10

R24

Out

stand

ing E

lectr

onic

s Man

ufac

ture

r Co,L

td.

ADS0

271 S

erie

s

Xia

ojia

n Li

5A/2

50V/

130℃



11.0 TEST RECORD

11.1 Electrical characteristic test record Input: Volt / Freq

90Vac/60Hz 115Vac/60Hz 230Vac/50Hz 264Vac/50Hz

Ripple& Noise 230Vac/50Hz

(mVp-p)

Efficiency 230Vac/50Hz

(%)

Power Consumption240Vac/50Hz

No load

Full load

No load

Full load

No load

Fullload

No load

Fullload (120)mV max (81.0)%min (0.3)W max

1

2

3

4

5

6

7

8

9

Out

put(V

)

10

SCP: Pass:√ , Fail: X OCP Pass:√ , Fail: X noise test( 0 ~ full load ) pass:ˇFail: × 90Vac/60

Hz 264Vac/50

Hz 90Vac/60

Hz 264Vac/50

Hz 90Vac/60Hz 115Vac/60Hz 230Vac/50Hz 264Vac/50Hz

OTP:Pass:√ Fail: X

1

2 3 4 5 6 7 8 9

Sam

ple

10 Hi-Pot : Pri.-Sec. 4242Vdc 10mA.

( Pass:√ , Fail: X) Burn-in: 220Vac±10%/50Hz 40℃ 4Hours. full load.

( Pass:√ , Fail: X) Sample 1 2 3 4 5 6 7 8 9 10 Sample 1 2 3 4 5 6 7 8 9 10

Result Result Test

Equipment √ AC power Sourse √

ElectronicLoad √ Multimeter √ Oscilloscope √

Power meter √

Dielectric Analyzer

Model No. AFC-500W

Prodigit 3311 60V/60A 300W Fluke 45

Tektronix TDS3032300MHz 2.5GS/s Chroma 2100 Extech 7410

Item

Date

Sam

ple

Item

Date

Test Report issued under the responsibility of:

TEST REPORT

IEC 60950-1

Information technology equipment – Safety –

Part 1: General requirements Report Number. ............................. : 17027896 001

Date of issue ................................... : September 25, 2012

Total number of pages ..................... 109 CB Testing Laboratory ................. : TÜV Rheinland (Shenzhen) Co., Ltd.

Address .......................................... : 3&4 F, Cybio Technology Building No. 1, Langshan No. 2 Road, 5th Industrial Area, High-Tech Industry Park North, Nanshan District, 518057 Shenzhen, China

Applicant’s name .......................... : Outstanding Electronics MFG. Co., Ltd.

Address .......................................... : 3F, No.541, Chung Cheng Road, Hsin-Tien, Tapei Hsien, 231 Taiwan

Manufacturer’s name……………….: Same as applicant

Address .......................................... : Same as applicant

Test specification:

Standard ......................................... : IEC 60950-1:2005 (2nd Edition); Am 1:2009

EN 60950-1:2006+A11+A1+A12

Test procedure ................................ : CB Scheme

Non-standard test method…………..: N/A

Test Report Form No. ................... : IEC60950_1B

Test Report Form(s) Originator ....... : SGS Fimko Ltd

Master TRF ..................................... : Dated 2010-04

Copyright © 2010 Worldwide System for Conformity Testing and Certification of Electrotechnical

Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved.

This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.

If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed.

This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory

and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.

Test item description .................... : Power Adaptor

Trade Mark ..................................... :

Manufacturer .................................. : Same as applicant.

REPORT LISTAtech OEM Inc.SHIANSEE INDUSTRIAL PARK, SHIPAI TOWN. DONGGUAN CITY, GUANGDONG CHINA.

Switching power supply adaptorADS0271-X XXXXXX Series ProductMay 20,2013

Cd Pb Hg Cr6+ PBB PBDE

1 PCB CEM-1Single side QIAO LIAN SGS CANEC1302503502 2013/3/8 Green PCB 4 5 ND ND ND ND

RC0603 SERIES YAGEO SGS KA/2012/C0588 2013/1/4 General PurposeResistor ND 354 ND ND ND ND



2-2 CHIP ARRAY RESISTORCHIP RESISTOR TZAIYUAN CTI RLSHE001312930001 2012/12/28 ElectronicComponents ND 486 ND ND ND ND

MLCC Ceramic chipcapacitor Y5V SAMSUNG SGS

F690101/LF-CTSAYAA13-06137 2013/2/7

Ceramic chipcapacitor ND ND ND ND ND ND

MLCC C0G (NP0) SAMSUNG SGS F690101/LF-CTSAYAA13-06138 2013/2/7Ceramic chipcapacitor ND ND ND ND ND ND

MLCC X7R SAMSUNG SGS F690101/LF-CTSAYAA13-06135 2013/2/7Ceramic chipcapacitor ND ND ND ND ND ND

MLCC X5R SAMSUNG SGS F690101/LF-CTSAYAA13-06136 2013/2/7Ceramic chipcapacitor ND ND ND ND ND ND

MLCC X7R 0603SERIES YAGEO SGS KA/2013/10485 2013/1/21

Multi-Layer CeramicCap ND ND ND ND ND ND





Black body UPM CTI RLSZF00156849CR1 2013/2/1 Black body ND ND ND ND ND ND

Silvery metal pin UPM CTI RLSZF00156849CR1 2013/2/1 Silvery metal pin ND ND ND Negative ND ND

Black Body PAN JIT SGS KA/2012/B0124 2012/11/2 Black epoxy moldingcompoundND ND ND ND ND ND

Lead free plating PAN JIT SGS KA/2012/B0124 2012/11/2 Silver lead free plating ND ND ND Negative NA NA

Copper Wire PAN JIT SGS KA/2012/B0124 2012/11/2 Copper lead frame ND ND ND Negative NA NA

Test items (Unit:ppm) Thirdparty testreport

Testing Lab Report No Report Date Test PartDescriptionMaterial NameManufacturerName

Product Name:Model:Unit Date:

Item Part Name

2-1 CHIP ARRAY RESISTORS

AXIAL DIODE4-1

4-2

CHIP CAPACITOR3-1

3-2 CHIP CAPACITOR

AXIAL DIODE(DO41 DO15 DO201AD R-1)

Acr o b a t 文件

A c r o b a t 文件

Ac ro b a t 文件

Ac ro b a t 文件

A cr o b a t 文件

Ac r o b a t 文件

Ac r o b a t 文件

Acr o b a t 文件

Acr o b a t 文件


A cr o b a t 文件

Ac r o b a t 文件

Ac r o b a t 文件


1.Lead wire KUAN KUN CTI RLSZE00142507 2012/9/19 1.Silvery metal pin ND 16 ND Negative NA NA

2.Al case KUAN KUN CTI RLSZE00142507 2012/9/19 2.Silvery-whitemetal ND 33 ND Negative NA NA

3.Anode foil 正箔 KUAN KUN CTI RLSZE00142507 2012/9/19 3.Gray Foil ND 24 ND Negative NA NA

4.Cathode foil 負箔 KUAN KUN CTI RLSZE00142507 2012/9/19 4.Silvery-gray foil ND 38 ND Negative NA NA

5.V-chip AL case KUAN KUN CTI RLSZE00142507 2012/9/19 5.Silvery-whitemetal

ND 37 ND Negative NA NA

6.Rubber seal KUAN KUN CTI RLSZE00142507 2012/9/19 6.Black rubber ND 9 ND ND ND ND

7.Sleeve KUAN KUN CTI RLSZE00142507 2012/9/19 7.Black plastic tube ND ND ND ND ND ND

8.Separator paper 電解紙

KUAN KUN CTI RLSZE00142507 2012/9/19 8.beige paper ND ND ND ND ND ND

9.Electrolyte KUAN KUN CTI RLSZE00142507 2012/9/19 9.Lt.yellow liquid ND ND ND ND ND ND

10.PP tapes KUAN KUN CTI RLSZE00142507 2012/9/19 10.Lt. yellowadhesive tape ND ND ND ND ND ND

11.Base KUAN KUN CTI RLSZE00142507 2012/9/19 11.Black plastic ND ND ND ND ND ND

12.V-Chip electrolyte KUAN KUN CTI RLSZE00142507 2012/9/19 12.Lt. yellow liquid ND ND ND ND ND ND

13.V-Chip ink KUAN KUN CTI RLSZE00142507 2012/9/19 13.Black Ink ND ND ND ND ND ND

Brown body EASYGATHER SGS CANEC1212787303 2012/9/241.Brown body w/black printing ND ND ND ND ND ND

Silvery metal pin EASYGATHER SGS CANEC1212787303 2012/9/24 2.Silvery metal pin ND ND ND Negative NA NA

SOT-26 GREATEK SGS CE/2013/16673 2013/1/31 Black solid body(mixall) ND ND ND ND ND ND

SOT-26 GREATEK SGS CE/2013/16673 2013/1/31 Plating Layer ofsilvery colored metal ND 57 ND Negative NA NA

Tinned copper wire WALTER SGS CANEC1215653029 2012/11/30 1.silvery Platedmetal wire ND ND ND ND ND ND

Fuse cap WALTER SGS CANEC1215653029 2012/11/30 2.silvery platedmetal ND 10 ND ND ND ND

Ceramic tube WALTER SGS CANEC1215653029 2012/11/30 3.White ceramictube ND 11 ND ND ND ND

Fuse link WALTER SGS CANEC1215653029 2012/11/30 4.silvery metal -fuselink ND 5 ND ND ND ND

Lead free solder wire WALTER SGS CANEC1215653029 2012/11/30 5.silvery metalsolder wire ND 61 ND ND ND ND

Glass fiber WALTER SGS CANEC1215653029 2012/11/30 6.white thread ND 5 ND ND ND ND

Quartz sand WALTER SGS CANEC1215653029 2012/11/30 7.white particlew/brown particle ND ND ND ND ND ND

Current fuse

DISC TYPE CERAMIC CAPACITORS

IC SOT26

5

8

6

7

ALUMINUMELECTROLYTICCAPACITORS

Ac r o b a t 文件

Ac ro b a t 文件


Ac ro b a t 文件

BLACK BODY HUAJING SGS SHAEC1221171301 2012/12/7 Black Body ND ND ND ND ND ND

SILVER METAL PIN HUAJING SGS SHAEC1221171301 2012/12/7 Silvery Metal Pin ND 7 ND Negative NA NA

10 HEAT SINK 鋁材華昌 SGS CANEC1215669202 2012/11/23 Silvery metal ND ND ND Negative ND ND

11 SCREW Plating Nickel SHUN GUAN SGS CANEC1209406407 2012/7/23 Silvery plating metal ND ND ND Negative NA NA

Blue body WELSON SGS CANEC1215621301 2012/11/22 Blue body w/blackprinting ND ND ND ND ND ND

Silvery metal pin WELSON SGS CANEC1215621301 2012/11/22 Silvery metal pin ND 6 ND Negative NA NA

1.Silvery film CARLI SGS CANEC1300440001 2013/1/16 1.Silvery film ND 9 ND ND ND ND

2.Yellow shell w/blackprinting CARLI SGS CANEC1300440001 2013/1/16

2.Yellow shellw/black printing ND 5 ND ND ND ND

3.Yellow solid material CARLI SGS CANEC1300440001 2013/1/16 3.Yellow solidmaterial ND 7 ND ND ND ND

4.Silvery metal pin CARLI SGS CANEC1300440001 2013/1/16 4.Silvery metal pin ND ND ND Negative NA NA

5.Silvery metal wire CARLI SGS CANEC1300440001 2013/1/16 5.Silvery metal wire ND 51 ND Negative NA NA

Epoxy resin KAIHUA SGS TSNEC1300040801 2013/1/18 Yellow powder ND ND ND ND ND ND

TPC wire SAMATRON SGS CANEC1207539403 2012/6/8 Silvery metal wire ND ND ND Negative NA NA

Solder SOLNET SGS CE/2013/34008 2013/3/22 Silvey metal wire ND 66 ND Negative ND ND

Ceramic THINKING SGS KA/2012/A1611 2012/10/30 Black ceramic ND 12.4 ND ND ND ND

Alloy 130℃ SET SGS CANEC1213380308 2012/10/16 Silver metal wire 3 12 ND Negative NA NA

Yellow Flux Resin SET SGS CANEC1213380321 2012/10/16 Brown solid material ND ND ND ND ND ND

Semi-transparent plasticSET SGS CANEC1213380319 2012/10/16 Beige plastic grains ND ND ND ND ND ND

White resin(epoxy) SET SGS CANEC1213380317 2012/10/16 White solid material ND ND ND ND ND ND

Red Ink SET SGS CANEC1214495407 2012/11/1 Red ink ND ND ND ND ND ND

Copper Wire SET SGS CANEC1213380301 2012/10/16 Silvery plated metal pinND 11 ND Negative NA NA

16 PTFE TUBE Clear tube WOER SGS CANEC1216892704A01 2012/12/14 Transparent tube ND ND ND ND ND ND

12

Temperature Fuse15

TO-220F

MPX CAPACITOR

MIDDLE HIGHVOLTAGE CERAMICCAPACITORS

13

14 VARISTOR

9


Acr o b a t 文件


Acr o b a t 文件


Ac r o b a t 文件

Ac r o ba t 文件

Acr o b a t 文件

Ac r o b a t 文件

C:\Documents and Settings\gc27\桌面\Y

Acr o b a t 文件

1.T375J 電木粉 CHANGCHUN SGS CE/2012/82937 2012/8/23 Black grain ND ND ND ND ND ND

2.MnZn Ferrite core JIULONGWANG SGS CAEC1302127704 2013/2/25 Dk-grey core ND ND ND ND ND ND

3.Enamelled wire ZHAO XINYUAN SGS CANEC1302044201 2013/2/26Copper coloredmetal wire ND ND ND ND ND ND

4.三層絕緣線 HUILI SGS CANEC1213707702 2012/10/19 Yellow plastic ND ND ND ND ND ND

5.Polyester mylartape(Light Yellow) YAHUA SGS CANEC1210047102 2012/7/31

Lt-yellow adhesivetape ND ND ND ND ND ND

6.Black PTFE Tube WOER SGS CANEC1216892703A01 2012/12/14 Black plastic tube ND ND ND ND ND ND

7.Clear PTFE Tube WOER SGS CANEC1216892704A01 2012/12/14 Transparent tube ND ND ND ND ND ND

8.Copper Foil YONGJIE SGS SHAEC1300102601 2013/1/8 Copper metal ND ND ND Negative ND ND

9. Solder Bar 新華錦 SGS CANML1216523008 2012/9/22 Silvery metal wire ND 69 ND Negative ND ND

10.Insulating Oil YIXIN SGS CANEC1303202206 2013/3/20 Yellow liqud ND ND ND ND ND ND

11.Polyester Film KK SGS CE/20127/2078M 2012/7/17 Transparent Sheet ND ND ND ND ND ND

12.Cp wire HONGDA SGS CANEC1207251404 2012/6/13 Silver metal wire ND ND ND Negative ND ND

13.Label膠水 FUZHOU CTI RLSDF000205680054 2013/2/28 White liquid ND ND ND ND ND ND

電木粉 CHANGCHUN SGS CE/2012/82973 2012/8/23 Black grains ND ND ND ND ND ND

Cp wire 宏達 SGS CANEC1207251404 2012/6/13 Silvery metal ND ND ND Negative ND ND

Enamelled Wire ZHAO XINYUAN SGS CANEC1302044201 2013/2/26 Copper metal wire ND ND ND ND ND ND

MnZn Core JIULONGWANG SGS CANEC1302127704 2013/2/25 Dark-Grey Core ND ND ND ND ND ND

鋼夾創富 CTI RLSZE001459120001C 2012/10/20 Silvery metal ND ND ND Negative NA NA

Yellow adhesive tape YAHUA SGS CANEC1210047102 2012/7/31 Light yellow ND ND ND ND ND ND

Solder Bar 新華錦 SGS SHAEC1216523008 2012/9/22 Silvery metal ND 69 ND Negative ND ND

Insulating oil YIXIN SGS CANEC1303202206 2013/3/20 Lt-yellow liquid ND ND ND ND ND ND

Polyester film KK SGS CE/20127/2078M 2012/7/17 Transparent sheet ND ND ND ND ND ND

Ink 迪愛生 SGS SHAEC1213759109 2012/8/11 Black paste ND ND ND ND ND ND

變壓器

共模電感

17

18

C :\ Do c um en ts a nd Se tt ing s\gc 27 \桌面 \變壓器

C:\ Docum ents and Set tings\gc 27\桌面 \共模電感

Core 恆瑞 SGS CANEC1304324602 2013/4/8 Dark-Grey Core ND ND ND ND ND ND


PC板 JIANYONG CTI RLSZE001386190001 2012/8/13 Beige board ND ND ND ND ND ND

Epoxy HUACHUANG CTI RLSZF001587390007 2013/3/1 Black paste ND ND ND ND ND ND

PTFE Tube SALIPT SGS CANEC1212371001 2012/9/17 Black plastic tube ND ND ND ND ND ND



電木粉 CHANGCHUN SGS CE/2012/82973 2012/8/23 Black grains ND ND ND ND ND ND

Cp wire 宏達 SGS CANEC1207251404 2012/6/13 Silvery metal ND ND ND Negative ND ND


MnZn Core JIULONGWANG SGS CANEC1302127704 2013/2/25 Dark-Grey Core ND ND ND ND ND ND

鋼夾創富 CTI RLSZE001459120001C 2012/10/20 Silvery metal ND ND ND Negative NA NA

Yellow adhesive tape YAHUA SGS CANEC1210047102 2012/7/31 Light yellow ND ND ND ND ND ND



Polyester film KK SGS CE/20127/2078M 2012/7/17 Transparent sheet ND ND ND ND ND ND

Ink 迪愛生 SGS SHAEC1213759109 2012/8/11 Black paste ND ND ND ND ND ND

DIP 8L HONGGUO SGS NGBEC1300418601 2013/4/2 Black body part ND ND ND ND ND ND

DIP 8L HONGGUO SGS NGBEC1300418601 2013/4/2 Silver metal pin part ND 8 ND Negative NA NA

Brown PVC EAST GLAD SGS CANEC1212719601 2012/9/25 Brown plastic grains ND ND ND ND ND ND

Blue PVC EAST GLAD SGS CANEC1212719603 2012/9/25 Blue plastic grains ND ND ND ND ND ND

Tinned copper wire TACWIRE SGS CANEC1300931601 2013/1/22 Silvery metal wire ND ND ND Negative NA NA

Black Ink SINWA SGS CANEC1212131805 2012/9/12 Black ink ND ND ND ND ND ND

21

LEAD WIRE22

IC DIP-8

20 工字電感

磁環電感19

Ac r o b a t 文件


A c ro b a t 文件



C:\Documents and Settings\gc27\桌面\共模電感

C :\D o cu me nts an d Se tti ngs\g c2 7\桌面 \磁環電感

White Ink SINWA SGS CANEC1212131806 2012/9/12 White ink ND ND ND ND ND ND

Solder Bar GUANGXI SGS CANEC1302036615A01 2013/2/27 Silvery Metal Bar ND 43 ND Negative NA NA

外管-H65銅信泰隆 SGS CANML1216541101 2012/11/2 Brassy metal tube ND 14 ND Negative ND ND

內彈片 (C5191) DINGJING SGS CANEC1301388402 2013/1/31 Copper metal sheet ND 35 ND Negative NA NA

絕緣体 (PBT) CHANGCHUN SGS CE/2013/43275 2013/4/22 Black plastic pellets ND 10 ND ND ND ND

鎳鍍層聯沛 SGS CANEC1212396405 2012/9/18 Silvery plating metal ND 26 ND Negative NA NA

24 ENCLOSURE SE-100X LASING CTI RLSZF001582680001 2013/2/25 Black Plastic ND ND ND ND ND ND

25 FLUX 助焊劑聯一 CTI RLSDF000213650065C 2013/3/29 Transparent liquid ND ND ND ND ND ND

26 SILICONE SILICONE MEI BAO XIN SGS CANEC1305213401 2013/4/22 White material ND 9 ND ND ND ND

27 SOLDER WIRE SOLDER WIRE 新華錦 SGS SHAEC1216523004 2012/9/22 Silvery metal wire 3 57 ND ND ND ND

28 綠膠 ADHESIVE WAN TASHING CTI RLSZE001275120001 2012/5/14 Light yellow paste ND ND ND ND ND ND

29 PVC膠粒 Black PVC KAM TAIYUAN SGS CANEC1300684903 2013/1/18 Black Plastic Grains ND 4 ND ND ND ND

KK SGS CE201272078L 2012/7/17 Silvery white/silversheet ND ND ND ND ND ND

KK SGS CE201272078L 2012/7/17 Transparent paste ND ND ND ND ND ND

白色 TUNG-MING SGS CE201310982A 2013/1/14 White ink ND ND ND ND ND ND

四色黑 TUNG-MING SGS CE201310991A 2013/1/14 Black Ink ND ND ND ND ND ND

ART paper lable（銅版紙）

KK SGS CE201272080A 2012/7/17 White Paper ND ND ND ND ND ND


KK SGS CE201272080A 2012/7/17 Transparent-yellowpaste ND ND ND ND ND ND


KK SGS CE201272080A 2012/7/17 Cream paste ND 9 ND ND ND ND

(1) PPM=mg/kg(2) N.D.=Not detected (