Specialist Tool Solutions New Products EUR.pdf · HYDRAULIC HUB PULLER KIT ... • Pressure is placed on the outside of the bearing ring for bearing ... 100 TONNE HAND OPERATED &

New Products& SPECIAL OFFERS

Specialist Tool Solutions

Featuring the New & Exclusive

may toaugust2018

www.sykes-pickavant.com 01543 6799001

€1362.00

€256.50

€318.00 €147.95

HYDRAULIC HUB PULLER KIT

HYDRAULIC & MECHANICAL HUB PULLER KIT

HEAVY DUTY 9KG SLIDE HAMMER

UNIVERSAL HUB PULLER & DRIVE SHAFT KIT

UPGRADE OPTION - THREAD ADAPTOR SET

star buy

new TO RANGE

085300SP

12730600

08583200

08535000

08583600

• For use on a variety of wheel stud pattern applications - 4, 5, 6 stud hubs, with pitch circle up to 203mm

• SP hydraulic ram allows for smooth, progressive application of up to 8 tonnes of force

• Includes heavy duty force screw with impact handle where shock action is required to ‘break’ stubborn hubs

• Leg Reach: 158mm

• Stud Hole Diameter: 15.8mm

Universal kit for pressing out, pulling in and separating drive shafts as well as disassembling/assembling wheel hubs

• Suitable for vehicles such as SUVs & transporters with an M14 wheel attachment and bolt circle of up to ø 136mm

• The anti-swivel puller is suitable for common nuts and bolt-secured drive shafts (e.g. VW / Audi)

Can be used with:

• 150000V2 - 8 Tonne Ram

• 180000V2 - 10 Tonne Ram

• 08530900 - Slide Hammer

• 12731100 - Shock Handle

• 08583200 - Slide Hammer

Mounting unit for Heavy Duty Slide Hammer - 08583200

• Supplied with 4 x commonly used slide hammer adaptors

• 1 x system adaptor tool, M18 x 1.5 with mounting bore (jointed connection) for universal hooks, double extractor hooks, bow hooks, bodywork pull clamps etc. Suitable for Müller /Klann /KS /Pichler

• 1 x system adaptor tool, M18x1.5/1-1/2 inch x 16 for wheel hub puller. Suitable for Müller /KS /Pichler

• 1 x universal adaptor with ball joint, M18x1.5, for use between the slide hammer and the tool, enables work in hard-to-reach places. Suitable for all systems

• 1 x system adaptor tool, M18 x 1.5/M22x2.0, for wheel hub puller. Suitable for Facom• Length: 770mm • Connection Thread: M18 x 1.5

FOR USE IN 3, 4 OR 5 LEG COMBINATIONS

NEW

hub pulling

Consists of manual and hydraulic components Includes:

• 08530800 - Specially designed extra-wide hub puller plate

• 150000V2 - 8 Tonne Hydraulic Ram c/w nose piece & 2” extension

• 087580-05 - Mechanical Screw - 1 1/2” whit

• 08530700 - Slide Hammer - 5/8” UNF x 1.6kg

• 08531270 - Adaptor for Slide Hammer

8 tonne

€262.50LIST PRICE: €319.14

SAVE: €56.64

Suitable for removing injectors, wheel hubs, supporting joints etc. with relevant accessories

• 8 tonne (approx.) maximum force

• Loosens even the tightest connections; pressed or rusted in

• For driving out components and straightening jobs on bodywork with extra tough heavy-duty design and practical handles

• Weight: 9kg

[email protected] 2

€1305.00

€352.95

€227.95

€113.95 €113.95€113.95

€159.50

€330.50

€198.95

€250.75

€198.95

€238.95

€382.00 €815.00 €564.00

€797.95

€250.75

€28.45 €36.45

UNIVERSAL PRESS FRAME C/W 12 TONNE HYDRAULIC RAM

UNIVERSAL C-CLAMP

Land Rover Swivel Ball Joint Adaptor Set

Adaptor Ring

Opel Movano / Renault Master / Nissan

Interstar - UPPER Ball Joint Adaptor Set

Opel Movano / Renault Master / Nissan

Interstar - LOWER Ball Joint Adaptor Set

Land Rover Discovery 3 & 4Suspension Bush Master Kit

Fiesta & Focus Bush Kit

Multi-applicationStep Plate

XS Sleeve Kit - Master

Car / LCV Sleeve Kit

SUV / LCVSleeve Kit

Commercial Sleeve Kit

Upgrade Kit - From 08790000

to 08797500

Fiesta Bush Adaptor Set

Focus Bush Adaptor Set

Front Lower Kit Rear Lower Kit

Rear Upper Kit Front Upper Kit

Land Rover Bush Press Kit

“take the press to the vehicle”

187000V2

18771000

18780400

187502V3 187503V3

187403V3 08269000

18777000

1873250018775100

08786500 08780000 08790000 0879750008795000

18732100

18732200

18777100

18777200

18777300

18777400

18775000

18780500or

Mercedes Sprinter Ball Joint Tool Adaptor Set

Ford Transit Lower Arm Bush Tool

€352.95

suspension

€113.95LIST PRICE: €119.64

SAVE: €5.69

€113.95

€432.00

LIST PRICE: €119.64


SAVE: €5.69

SAVE: €22.86

187502V3 + 187503V3 only for use with

187000V2 Press Frame


€216.50

€478.00€285.00

€216.50

08730500

087304V2

0808000008085000

08512800

084500V2

For the installation and removal of the rear axle body mounting bush found on Fiesta Mark VI 2008 onwards

• Updated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars

• One person operationApplications

• Ford: Mondeo / Mondeo Estate ‘07-, S-Max & Galaxy ‘06-

• Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10-

• For detecting faults in:- Wheel bearings- Suspension joints and suspension struts- Stabilizers, bushes and ball-joints- Steering gear and links

• The tool creates a rocking motion in any direction (forward angle, side angle etc.) in order to detect movement in steering and suspension components

• Recommended for use on four post lift or on floor

• Innovative and safe handling of springs on cars with wishbone and multilink suspension

• The only tool on the market capable of handling among others VW Touran, Citroën C3, Skoda Octavia, and Peugeot 107

• The ultra compact design makes it possible to use the tool for cars with a small hole in the rear spring control arm down to ø30 mm

• The innovative angled shape of the jaws provides a high degree of functionality and improves safety

• Comes with a unique safety key torque, which makes it easier, safer and more convenient to position the tool correctly inside the spring

• The safety key prevents overload and thereby improves safety

For lowering of the suspension arms and separation of suspension components

• Reduced effort required, due to unique design using leverage and body weight

• Adjustable swing point allows for variable LH & RH applications

To remove and install the rear axle body bush on the vehicleSuitable For: Astra H (L48) ‘04- / Astra GTC (L08) ‘05- / Astra H Box (L70) ‘04- / Astra Estate (L35) ‘04- / Astra Saloon (L69) ‘07- / Astra TwinTop (L67) ‘05- / Meriva B ‘10- / Zafira B (A05) ‘05-

FIESTA MARK VI REAR BUSH KIT

FORD & VOLVO REAR WISHBONE / TRAILING ARM BUSH TOOL KIT

ASTRA H / ZAFIRA REAR AXLE BUSH KIT

INTERNAL COIL SPRING COMPRESSOR

UNIVERSAL SUSPENSION ARM LEVERSUSPENSION WEAR INDICATOR

on vehicle solution NEW

suspension

SPECIAL JAW DESIGN

€188.95LIST PRICE: €227.94

SAVE: €38.99

€79.74

An innovative tool for detecting suspension and axle joint wear

SUITABLE FOR PRE MOT TESTING

[email protected] 4

€196.95

€740.00

suspension

08041000

08100000 96040000

08065000

08145000

080500V2

• Simple tool to use with ‘Vibro-Impact’ air hammer (90206000) when bolt ends protrude from housing

• Sleeve guides the impact end to free off and push bolt through the housing

• Extension adaptor for removing bolts deep in the housing

• Can be used in conjunction with 08485000 Hub Clamp Spreader Tool

• Drop forged rugged, flat design with 3 interchangeable forks

• Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range

• Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation

• Jaw capacity range: 30 - 65mm

• 3 x fork sizes: 24, 27 and 31mm

• Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz

• For the removal of bearings, races, sleeves etc.

• Removes the need for cutting tools – greatly reduces time required

• Unique patented design – specially designed cutting edges

• Legs ‘cut’ and are pressed into the radius behind the ring

• ‘Loose / Tight’ pulling principle - force is applied evenly around the ring

• Suitable for all kinds of bearings / rings – 40-60mm

Applications Include:

• ABS Sensors

• Brake Bleeder Nuts

• Exhaust System

• Heat Treating

• Inline Connectors

• Metal Fabrication

• O2 / DPF Sensors

• Truck Bed Bolts

• Body Panel Dents

• Tie Rod / Ball Joint Ends

• Suspension Components

• Steering Components

• U-Bolts

Generates ‘Invisible Heat’ to release corroded and thread locked metal components without the danger of an open flame

• Angled design with trigger

• Coil Twist Lock™

• LED usage indicator

• Fault override delay

• User controlled LED light switch

• Fan operation enhancements

Complete set for mounting and dismounting wheel bearings and for assembling hubs

• The large number of pressure bushes and centering washers in this kit makes it ideal for a wide range of applications upon cars, vans and transporters

• Guarantees safety and accuracy at all stages of the working operation

• Also ideal for use with a press machine; suitable for wheel bearings, silent bearings, bushes, washers, hubs etc.

• The special design of the components provides installation without damage

• Pressure is placed on the outside of the bearing ring for bearing installation and the inside for hub installation

• Unique 4-way lever design allows for a wide variety of applications

• 4 options are available, by removing the pin and selecting any of the 4 positions

• Tapered, slim jaw fork design with tough, black epoxy coating

• Jaw Opening: 24 / 30 / 40 / 45mm options

• Jaw Throat Width: 19mm

• Jaw Throat Depth: 30mm

VW ALLOY 4 LINK SUSPENSION BOLT REMOVER SET

UNIVERSAL BEARING RING PULLER INDUCTION HEATER +

3-SIZE BALL JOINT SEPARATOR

UNIVERSAL WHEEL BEARING KIT

4 WAY BALL JOINT SEPARATOR - CAR / LCV APPLICATIONS

two year warranty

BEARING REMOVAL BEARING INSTALLATION HUB INSTALLATION

KIT CONTENTS• 1 x Coil

• 1 x String

• 1x Bearing Buddy

NEW

€695.00€262.50

€38.75 €73.95


LIST PRICE: €47.82 LIST PRICE: €88.56

SAVE: €56.64

SAVE: €9.07 SAVE: €14.91


Range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic ram return system & V blocks

• Heavy duty steel frame

• Automatic arm return

• Manufactured in the EU

• Two speed pump

• Pressure gauge

WORKSHOP presses

best selling modelsAVAILABLE IN 4 RATINGS:

15T, 20T, 30T & 50TPART NO. RATING HEIGHT

(mm)WIDTH (mm)

DEPTH (mm)

BED DEPTH(mm) RANGE WEIGHT

(kg) PRICE

53436000 15T 1930 920 650 170 85 - 950 150 €774.00

53436200 20T 2030 940 650 180 65 - 1030 165 €911.00

53436400 30T 2060 1120 650 200 115 - 1020 230 €1495.00

53436500 50T 2290 1220 650 210 70 - 1065 370 €2165.00

*For models 53436400 & 53436500

‘SILVER SERIES’ HYDRAULIC WORKSHOP PRESSES

• Piston over-travel limit stop

• Overload safety valve

• V blocks

• Winch for table*

N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply / Other sizes of press are available - Contact Customer Services or visit www.sykes-pickavant.com for details

€261.00

€95.00

newbestseller

for use with press block - 08770000

press support blockUNIVERSAL PRESS RING

A quick solution to assist the bearing to be pressed out on a wide range of common hubs

• Ideal large void for holding hubs and pressing out wheel bearings

• Large diameter sits across the press allowing for large hubs to be placed on the press ring

• Useful alternative to V blocks and old bearing casings

• Suitable for use on 30 or 50 tonne rated presses

• Dimensions: 160mm (h) x 179mm (ø)

• Weight: 7.8kg

Universal Press Support Block

• Press bearings on a variety of suspension arms

• Three point contact for perfect, safe support

• Adjustable height anvil bolts

• Swivel element for added versatility

• Numbered system for recording specific applications

• Suitable for use with presses up to 30T

0877000053452200

60 - 100 TONNE HAND OPERATED & ELECTRO-HYDRAULIC PRESSES ARE ALSO AVAILABLE - SEE WEBSITE FOR DETAILS

[email protected] 6

SUSPENSION WORKSTATIONS

our workstations evolve as and when required

MARKET LEADING MODEL

heavy duty

Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WDs and LCVs

• Safety switch prevents operation when gates are open

• Adjustable strut vice with 4 x setting options

• Interchangeable jaws/ vice to suit different springs

• Unique double depth front plate

• Length of travel: 330mm

• Up to 2452kg of force (at 10 bar)

• Top arms & jaws adjust and lock to secure spring

• Automatic jaw levelling

• 4 x floor mounting holes

• Includes 2 x standard brackets: 78-130mm and 105-182mm

385800SP

38680000

PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION

MECHANICAL COIL SPRING COMPRESSOR WORKSTATION

• Fitted with Heavy Duty Mechanical Components instead of Pneumatics - Ideal for mobile use or where air supply is not practical

• High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring

• Long main spindle achieves a large 420mm stroke

• Powered by easy access 19mm hex drive on top of tool directly onto main spindle and can be used with either hand tools or impact air tools

• Includes adjustable vice clamp

ideal for mobile use

• Mounts between original top arm and jaw attachment

• Use to extend the length of the top spring mounting jaw position

• Can be used singly to provide 10mm extension or as a pair for 2 x 10mm extension

• Mounts onto top arms in place of standard top jaws & contacts directly onto spring

• Jaw ‘floats’ to follow changes in spring angle / profile during compression

• Works on left and right handed coil springs when used with brackets below

Suitable for: Rear Springs

• Mercedes ML Class 163 1997-2005

Suitable for: Front Springs

• Mercedes C Class (W205) 2015 onwards

Suitable for: Front Springs

• Mercedes C Class (W204) 2008-2014

• Mercedes E Class Coupe (W207 / C207) 2009 onwards

For Leftwards Front Spring Applications (between 105 - 187mm) Including Nissan Qashqai (J10 2006 - 2013), Renault Koleos and Laguna

MERCEDES BRACKETS

ARM EXTENDER - PAIR SWIVEL JAWS - PAIR

LEFTWARDS SPECIAL BRACKET

BMW SPECIAL BRACKET

JAW HOLDER

UPPER JAW SET

38580000 COVER

MIRROR

COIL SPRING CLAMP

DOUBLE DEPTH STRUT VICE

NISSAN SPECIAL BRACKET

38480800

385800-60 385800-61

38481600

38580200

38480200

3858COVER

385800-50

38580400

38480700

38481100

3848090038481000

38480600

Suitable for:

• BMW Base Coupe 2-Door 2003 - 2011

• Base Sedan 4-Door 2003 - 2011

• xDrive30i Sport Utility 4-Door 2007 - 2010

• 3.0si Sport Utility 4-Door 2007 - 2008

• For use with 3858 and 3868 workstation brackets

• Includes 3 x hanging hooks and 4 x slots for brackets

• Provides a tidy and safe storage solution

• For high compression and close coil springs (Toyota / Honda etc.)

• For protection of the 38580000 Coil Spring Compressor Workstation when not in use

Adjustable upper mirror for better centering of the shock absorber cap during assembly and operation

• Compatible with any of our workstations

• Magnet attachment

• Tool to secure coil spring into lower bracket for use with the SP range of suspension workstations

• Designed to hold the coil spring still during initial compression and restrict twisting through the bracket

• Rubber dipped to prevent scratching the coil spring

• For use with extra long strut assemblies

• Chrysler Voyager

Suitable for:

• Nissan Qashqai (J11 2014 - )

INCLUDES FREE ADAPTOR BRACKET SET (38780100)

€90.95

€90.95

€43.25

€59.95

€33.95

€90.95

€90.95

€53.50

€176.95

€144.75

€113.95 €113.95

€113.95

€143.50

€2046.00LIST PRICE: €2160.30

SAVE: €114.30

€1020.00


torque

Motorq Professional Torque WrenchES• Accurate to ±3% of reading which meets and exceeds ISO6789:2003

• 60% larger scale for better visibility and improved accurate setting

• Scale adjusts 40% faster and the effort required to adjust is reduced

• Improved serviceability means longer life and reduced ownership costs

• Superior, ergonomic handle and shape - Soft-feel, high grip material and more comfortable to use

• Now includes a push/pull type lock for faster use; the coloured band on the lock clearly shows that the wrench is unlocked

• New Timestrip® Feature - Torque wrenches should be calibrated once a year as a minimum, more frequently in harsh environments and with high levels of usage

MADE IN THE UK

Our new torque wrenches feature the Timestrip® which provides a visual indication when the wrench is due for re-calibration and has 3, 6, 9 and 12 month graduations

PROFESSIONAL SCALE

PUSH-THRU HEAD

TIMESTRIP

ALSO FEATURES

®

‘Motorq 20’ - 3/8” Push-Thru Torque Wrench






‘Motorq 340’ - 3/4” STEPPED Torque Wrench

4 - 20 Nm

10 - 50 Nm

20 - 100 Nm

40 - 200 Nm

60 - 300 Nm

60 - 340 Nm

80 - 400 Nm

• 3/8” push thru sq dr

• Length: 210mm

• Supplied in poly tube


• Length: 335mm

• Supplied in blow moulded box


• Length: 387mm



• Length: 470mm



• Length: 593mm



• Length: 685mm


• 3/4” sq dr (uses stepped convertor)

• Length: 686mm

• Weight: 1.93kg• Supplied in blow moulded box

• 80 - 400 Nm / 60 - 300lbs.ft

• 4 - 20 Nm / 40 - 180lbs.in

• Weight: 0.36kg

• 10 - 50 Nm / 7.5 - 37.5lbs.ft

• Weight: 0.7kg

• 20 - 100 Nm / 15 - 75lbs.ft

• Weight: 0.94kg

• 40 - 200 Nm / 30 - 150lbs.ft

• Weight: 1.07kg

• 60 - 300 Nm / 50 - 220lbs.ft

• Weight: 1.42kg

• 60 - 340 Nm / 50 - 250lbs.ft

• Weight: 1.48kg

80002000

80105000

80110000

80120000

80130000

80134000

80140000

€138.00

€162.50

€162.50

€180.75

€199.25

€214.95

€279.00

N.B Time strip not included with this model

[email protected] 8

€44.50 €72.25

€189.00

€546.00 €865.00

€135.00

€432.00

silbertool®

silbertool thread reformer®

PER ROLLER PACK

MAIN ASSEMBLY*

MAIN ASSEMBLY* MAIN ASSEMBLY*

MAIN ASSEMBLY*

PER ROLLER PACKMORE ROLLER PACKS HERE

WATCH THE VIDEO HERE




WATCH THE VIDEO

01426000 & ROLLER PACKS

01431100 & ROLLER PACKS

MORE ROLLER PACKS HERE

PER ROLLER PACK

01421600

01431100

01423600

01426000

M5 - M16 M10 - M36

M50 - M110M10 - M60

NEWOur new range of External Thread Reform Tools use innovative non-cutting technology to return threads from M5 – M110 back to their original shape

• Allows original parts to be reused rather than replaced

• Works on all types of thread including metric, fine and imperial with compatible rollers

• No external energy source is required; process is completed by hand

• Threads aren’t weakened during the reforming process; cold hardening leaves the thread 39% harder than those which have been cut

• Threads reformed with the Silbertool® withstand the same static and dynamic loads as a new undamaged thread, with a higher fatigue endurance limit

• The finished surface is smoother than if cut which reduces the chance of corrosion and improves thread lifespan

Perfect for truck axles due to large thread diameter accommodation

Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately

THREAD REFORMER OPTIONS

POPULAR COMPATIBLE ROLLERS FOR THE 01421600

POPULAR COMPATIBLE ROLLERS FOR THE 01426000 & 01431100

POPULAR COMPATIBLE ROLLERS FOR THE 01423600

+

014216-304

014311-104 014311-106 014311-108

014236-203 014236-206

014236-207014236-204

014236-205

014216-305

014311-105 014311-107 014311-109

014216-306

Metric 1.00mm

Metric 1.25mm Metric 1.75mm Metric 2.50mm

Metric 1.00mm Metric 1.75mm

Metric 2.00mmMetric 1.25mm

Metric 1.50mm

Metric 1.25mm

Metric 1.50mm Metric 2.00mm Metric 3.00mm

Metric 1.50mm

* Rollers required but not included





€2449.00

WORKSHOP EQUIPMENT

The Fortron Injector Max Machine provides a simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle

• Cleans the complete fluid systems without disturbing / removing any key components

• Includes comprehensive adaptor set and Injector Max Fluids - Petrol & Diesel

• Operates using compressed air

• Multi Functional - Cleans fuel injectors, fuel lines, fuel pumps, combustion chambers and throttle body systems

• Removes all deposits from the fuel system without damaging the engine, fuel pump and fuel lines

• New technology Injector Max system cleaning fluids are suitable for all vehicles including the latest style common rail diesel engines - Made in Britain to be compatible with European fuels and recognised bio-diesels

53403500FORTRON INJECTOR MAX

INCLUDES:

INCLUDES:

INCLUDES:

INCLUDES:

FOR CARS SUFFERING WITH LACK OF POWER, ROUGH IDLE OR POOR FUEL ECONOMY

BENEFITS INCLUDE:IMPROVED MPG

IMPROVED POWER

LOWER EMISSIONS

SMOOTHER PERFORMANCE

CO2

Comprehensive adaptor set

FREE leaflet dispenser & Injector Max leaflets

Listing on the Injector Max Garage Directory

As featured on our website

Access to the Fortron-Zone Forum

Share and gain knowledge

OTHER MACHINES, FLUIDS AND ACCESSORIES HERE!

[email protected] 10

new andexclusive

€3756.00LIST PRICE: €3984.30

SAVE: €228.30

• Promotes efficient engine operation with a cleaner engine

• Hydrogen runs into the combustion engine’s air inlet system whilst running

• Portable machine - enables use away from the normal garage environment

• Low Voltage Operation - works off the vehicle’s battery at a safe low voltage when the engine is running

• Easy to use - no or little disassembly of the engine required

• Low maintenance - made in the UK

• Fixed HHO supply • Two year warranty

approx.10 minutes into operation approx. 30 minutes into operation after operation

Initial indication of carbon deposits being cleared; visible in exhaust smoke

As deposits burn off, exhaust smoke already begins to appear cleaner

Internal build up is expelled leaving the vehicle with a cleaner engine

MADE IN THE UK

53400300

SPECIAL INTRODUCTORY PRICETWO YEAR WARRANTY

WATCH THE VIDEO HERE!


hgv

®

Motorq Heavy Duty Torque WrenchES - break back style

‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench


‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench


‘Motorq’ Heavy Duty Torque Multiplier 1” Impact Wrench - long anvil

150 - 700 Nm

80 - 340 Nm

300 - 1000 Nm

300 - 1000 Nm

only 6.8kg

UP TO 3100nM

• 3/4” push-thru sq dr

• Length: 1150mm


• Length: 783.5mm


• Length: 1475mm

• 1” Sq. Dr (uses ¾” to 1” stepped convertor)

• 700 - 1500 Nm / 500 - 1000lbs.ft

• Length: 1475mm

• 150 - 700 Nm / 100 - 500lbs.ft

• Weight: 6.30kg

• 80 - 340 Nm / 60 - 250lbs.ft

• Weight: 3.00kg

• 300 - 1000 Nm / 200 - 750lbs.ft

• Weight: 7.30kg

• Weight: 10.40kg

80040000

80050000

80055000

80134500

80065500 90204500

• Single stage epicyclic gears, producing a 5 : 1 multiplication ratio

• Use with conventional torque wrenches for heavy duty applications

• Supplied with reaction bars, in plastic storage case

• After-sales service available

• Input Drive: 3/4” sq dr / 36mm hex

• Max Input: 540 Nm

• Output Drive: 1”

• Powerful twin hammer mechanism

• 4 step power control

• Smart design and ergonomically designed handle

• Single-switch can be changed for easy forward or reverse operation

• Easily adjustable torque regulator

• Can be configured for right and left handed use

• Lightweight magnesium composite housing

• 190mm long anvil• Max Output: 2700 Nm

• Weight: 4:5

MADE IN THE UK

€489.00

€502.00

€752.00

€801.00

€895.00

€313.50LIST PRICE: €372.21

SAVE: €58.71


hgv

Note: Full application details can be found on our website: www.sykes-pickavant.com

66193200 66198100 66198200

XL Cooling System Pressure Test Kit

HGV SPLIT BUSH KIT - master

Wheel Hub Grinder 90mm HGV wheel stud grinder - alu body

HGV HUB PULLER KIT

Ball Joint Separator - HGV

12 Tonne Hydraulic Ball Joint Separator

BESTSELLER

1 Holder + 1 Disc

90mm NEW

available 1st july

2pc.

5pc. 5pc.

331400V2

18797000

66193000 66198000

08070000

180700V2

Applications Include: Bova, Case, Caterpillar, County, DAF, Dart, David Brown, Denis, Deutz-Fahr, ERF, Fendt, Ford, Iveco, JCB, John Deere, Komatsu, Leyland Marshall, MAN, Massey Ferguson, Mercedes-Benz, Neoplan, New Holland, Optare, Renault, Scania, Volvo construction and agricultural vehicles

Includes:

• Metal bodied hand pump with pressure dual gauge & quick-release fitting

• Hose Assembly c/w quick-release fitting

• 10 x Reservoir & Radiator pressure caps

Universal wheel HUB extractor

• Variable for pitch circle diameter up to 300mm

• To suit wheel stud sizes commonly found on DAF, MAN, MERC & RENAULT models

• Contains 5 x thread adaptor pairs;

- M18 x P1.5 x 65mm/L

- M20 x P1.5 x 65mm/L

- M22 x P.15 x 65mm/L

- M24 x P.15 x 65mm/L

- M30 x P.15 x 65mm/L

• Strengthened fork and lever, allows for greater force to be applied

• Jaw opening capacity 70mm, jaw width 36mm

Updated kit now uses power from the SP 12 tonne hydraulic ram

• Hydraulic version of the 08070000 HGV Ball Joint Separator

Specification:

• Jaw Opening: 70mm

• Jaw Throat Width: 36mm

• Jaw Throat Depth: 50mm

For the removal and installation of split / spring eye bushes on HGV vehicles

• Uses a unique clamping system and a series of shells for a range of bush sizes from 56mm Dia to 75mm Dia.

• When used with a hydraulic pump (20017000) the kit allows the operator to work in a limited access environment and so reduce the amount of disassembly work required

ApplicationsShell 1 (75mm) - Mercedes Benz Shell 2 (70mm) - MANShell 3 (68mm) - MAN Front SpringShell 4 (66mm) - IVECO Eurostar

Special grinder for cleaning the wheel centring device and the attachment face between the wheel and hub, removes stubborn corrosion residues quickly and easily (3 - 25 second processing time per hub)

• Grinding Diameter: 200mm

• Internal Diameter: 90mm

• Max. Speed: 1000rpm

2pc. spare discs for 66193000

5pc. standard spare discs for 66198000

5pc. rough spare discs for 66198000

Shell 5 (65mm) - Mercedes Benz Actros, AtegoShell 6 (63mm) - DAFShell 7 (60mm) - Mercedes Benz / IVECO EurostarShell 8 (58mm) - Mercedes Benz / Volvo Shell 9 (56mm) - IVECO Eurostar

Special Grinder used to clean the wheel rim contact surface, designed for vehicles with stud bolts - corrosion is quickly and easily removed

• 1 holder, 5 x 56mm standard discs & 5 x 56mm rough discs

€341.95€168.95

€877.00

€102.50

€127.95

€336.25

€512.00

€67.95 €32.95 €44.50

21027500


€569.00€329.00 €394.00

FLUID HANDLING

• For transportation and refuelling of AdBlue® equipped vehicles

• Ideal for car, van, light commercial, agricultural, construction and heavy commercial workshops

• Impact resistant polyethylene tank, UV stabilised and equipped with wheels suitable for easy transportation

• Horizontal filling operation • Vented filling plug

Designed to meet the requirements of the modern workshop as well as health & safety issues

• Remove / extract waste fluids or oil from an engine

• Works best at oil temp between 40-60° with suction speeds of up to 6 litres per minute

• Combined volume capacity of 90 litres (70L tank & 20L drain bowl)

• Working pressure 8-10 Bar

• Powered by compressed air

Applications:

• Retrieve fuel following a filling error or removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc.

• Emptying via tank filler neck or fuel lines

PART NO. DESCRIPTION TYPE HOSE TANK EMPTYWEIGHT PRICE

36610100 AdBlue® Transport Tank - 68L Manual Pump

Plastic manual rotary pump with plastic manual nozzle

4m EPDM 11kg €478.75

36610500 AdBlue® Transport Tank - 68L 12v DC Pump

12v DC pump - 30L/Min with plastic manual nozzle

4m EPDM 16kg €712.50

36611000 AdBlue® Transport Tank - 110L 12v DC Pump

12v DC pump - 30L/Min with “Piusi” digital nozzle

3m EPDM 12kg €1249.00

PNEUMATIC OIL EXTRACTORPNEUMATIC OIL EXTRACTOR WITH 9 LITRE INSPECTION CHAMBER

IDEAL FOR VEHICLES WITHOUT A SUMP PLUG

Both Include:

• Adaptors for BMW, Mercedes, VW and Citroen

• 4 x 700mm nylon tube probes with internal spring steel anti-kink wires

• 2 x 700mm steel probes

53390500 Includes:

• Inspection chamber to ensure the suction feature is working correctly

• Anti-splash device

36600500

WARNING: Do not use with corrosive or flammable products

5339050053390000

ADBLUE TRANSPORTATION TANKS

Fuel Extractor / Retriever Pneumatic Oil Extractors

® AVAILABLE IN 68L & 110L TANK SIZES

stainless steel 45l tank

Standard model also available - part number 35081000

premium atf machine

product of the year 2018

• Automatic Operation - via control panel with large LCD colour screen

• Zero Cross-Contamination - cleans the circuit with just 1 litre of oil and prevents cross-contamination between different ATF oils

• Automatic Recirculation Function - prevents any over-pressure related damage

• Automatic ATF Temperature Measurement - allows for flushing to start automatically when oil conditions are ideal

• Automatic Flow Direction - provided by the pressure sensors

• Pumps Flow-Rate Control - adapts the flushing speed to the transmission characteristics

• Fully Automatic Operation - via in-built updatable vehicle database

• Instructional Database - provides complete instructions for ATF flushing operation; oil grade, capacity, service points, connections & adaptor information

• Twin Pump Machine - for faster flushing control even on tricky transmissions

• Dedicated New Oil Tanks - can easily be interchanged with quick change coupler

• Dipstick Function Feature and Probe - allows oil changing via dipstick tubes where service can only be done through the oil refill hole as well as power steering fluid change

• Boost Function - speeds up used ATF discharge in case of transmission equipped with low flow-rate pump

• Printer and Additive Cannister - provided as standard

€3757.00PREMIUM ATF MACHINE

REQUIRES ADAPTOR KIT

350820SP

Applications Include:

Volvo, PSA Group, Renault, Jeep, Mitsubishi, GM, Suzuki, Toyota, Saab, Mercedes, Ssangyong, Audi, VW, BMW,

Jaguar, Nissan, Daihatsu, Suzuki, Fiat, Lancia, Ford, Porsche, Alfa Romeo, Cadillac, Land Rover, Chrysler*

Applications Include: GM, Fiat, Ford, Jeep, Chrysler, Saab, Mercedes, BMW, Jaguar, Volvo, Land Rover, VW, Rover, Opel, Alfa Romeo*

ADAPTOR KIT 2

ADAPTOR KIT 1

*Model restrictions apply, see website for full application list

See website for options35083100

35083000

adaptors also available separately

€679.00

€679.00

new PRINTER & built in database INCLUDED


€169.00

€226.95 €101.50

€238.00 €215.00

air tools

1/4” - 3/4” available

1/4”3/8” 1/2” 1/2” 3/4”

PART NO. IMAGE LENGTH DIAMETER PRICE

902135-01 40mm 3mm €61.50

902135-02 33mm 3mm / Sphere - 4mm €62.50

902135-03 40mm 3mm €61.50

902135-04 40mm 3mm €61.50

902135-05 40mm 3mm €61.50

902130SP90213500

90215000 90220000

90210000

9020200090201300 9020100090202500

90203500

IMPACT WRENCHES

RUBBER BOOTS

MICRO DIE GRINDER BIT SET (5 PACK)

ALSO AVAILABLE - PACKS OF 3

HELPS PROTECT IMPACT WRENCH FROM ACCIDENTAL DAMAGE

IDEAL FOR CUTTING SEIZED COMPONENTS, EXHAUST FITTINGS & LOCKING WHEEL NUTS

COMBINED DEAL - MICRO DIE GRINDER & BIT SET

AIR TOOL SERVICE & LUBRICATION KIT

UNIVERSAL AIR SWIVEL JOINT INLET

SIGNAL HOSE - 10MM (3/8”)FEATURES INTERNAL MEMBRANE

ONLY 3.2KG

COMPACT SIZE

7 VANES FOR EXTRA POWER

7 VANES FOR EXTRA POWER

LOW AIR CONSUMPTION

ULTRA SHORTBODY

UP TO 2600NMUP TO 1600NMUP TO 680NMUP TO 90NM UP TO 680NM

special offer

• Smart design and ergonomically designed handle

• Single-switch can be changed for easy forward or reverse operation

• Easily adjustable torque regulator

The latest generation mini composite device for small / fine grinding and milling - Includes 90213000 Micro Die Grinder & 90213500 5 pc. Bit Set

• Ideal for use in confined spaces

• Provides perfect handling due to the ‘Bionigrip’ surface

• Minimal vibration and low noise

• Powerful mini device for small / fine grinding & milling

• 1/8” drive / 70,000 rpm

• Abrasion resistant outer cover

• Internal membrane prevents kinking & hardening

• High-visibilty hose to reduce trip hazard

• Working temp range: -40°c to +65°c

• Working pressure: 300psi• Break pressure: 1000psi

• Length: 10 metres

• For use with Micro Die Grinder (90213000)

• Contains five shaped ends suitable for precision work

• Can be configured for right and left handed use

• Lightweight magnesium composite housing

• 3 step power control

For servicing air toolsIncludes:

• 1 x bottle of air tool oil

• 1 x tube of air tool grease

• Applicator nozzle

• Grease press

• 2 x 360° rotation

• Industrial quality

• Heat treated connecting screw

+

*Impact wrench not included

N.B. Hose supplied without fittings

€22.75

€39.95

€24.95

€249.00 €599.00

90201100

90202100

90201600

FOR USE WITH 90201000

FOR USE WITH 90202000

FOR USE WITH 90201500& 90202500

€21.95

€18.50

€23.95


WHEELS

75mm

40mm 60mm

inner rim cleaner

wheel stud grinder - alu body

special offeralso available

++

66195500 INNER RIM CLEANER + WHEEL HUB GRINDING ATTACHMENT PACK

SPARE DISC PACKS ALSO AVAILABLE

661922SP

661927SPFor the optimal cleaning of the inner wheel contact surface

• 160mm diameter

• Prevents corrosion related distortion of wheel bolt tightening torque

• Completely removes burnt in corrosion

• To be used only on the inside of an aluminium rim, particularly the inner area prior to wheel balancing

• The porous abrasives and cup shaped grinding plate ensures minimal dust

• Discs are attached with velcro, making them easy to replace

• Optimized for the latest wheel rims with an internal diameter of 75mm

Special Grinder used to clean the wheel rim contact surface, designed for vehicles with stud bolts - corrosion is quickly and easily removed

• 1 holder, 6 x 60mm discs & 5 x 40mm discs supplied

5pc. 40mm spare discs for 66194000 5pc. 60mm spare discs for 66194000

For cleaning the wheel centring device and the attachment face between the wheel and hub, removes stubborn corrosion residues quickly and easily (3 - 25 second processing time per hub)

5pc. 5pc.

60mm

3pc.

BESTSELLER66194000

66195500

66194200 66194300

€79.95

€30.75 €33.00

75mmideal for bmw

3pc.

€120.75

€121.95



SAVE: €7.96

SAVE: €7.90

€62.95

Universal tool for the removal of unwanted build ups

• Double edged blade gives you the ability to use the tool on both sides as a push or pull tool

• Ergonomically designed to fit comfortably in your hand

• High quality carbide tips give the tool a longer lifespan

• Versatile tool with many uses

• Aids with the removal of rear cluster lights

• Can be used for removing stuck wheel weights or trim

• Ideal for removing door panels

• Ergonomic edge

• 3 sided blade

• MOT approved gauge complete with pocket clip

• Measures 0 – 26mm in 1mm increments

• Inc. 1.6mm depth measurement for MOT regulations

For use on gaskets, corrosion on brakes, paint and glue in hard to reach areas and carbon on the exhaust manifold

€80.50 €11.50

67000200 0328000068010100CARBIDE SCRAPER KIT TYRE TREAD DEPTH GAUGEUNIVERSAL TRIM TOOL

€7.40


hurry! limited stock available

MECHANICS VICE - FIXED BASE

RETRACTABLE HOSE REELS

SYKES-PICKAVANT EXCLUSIVE OFFER

SWIVEL BASE FOR MECHANICS VICE

• High quality, heavy duty construction provides years of trouble free use

• CNC machined components for excellent fit and durability

• Hardened and tempered finely ground jaws for superior grip

• Scratch resistant hammered blue finish

• Replacement parts available including jaws and handle

• Spring driven retractable hose reel c/w wall mounting brackets

• Polypropylene case

• Suitable for compressed air or cold water up to 17 bar working pressure

• Heavy duty rubber air / water hose to ISO EN 2398 standard

• Allows 360° rotation of Mechanics Vice for better access

• Lockable to most convenient angle

• Compatible with Mechanics Vice

BESTSELLER

341300SP861002SP1

*Excluding jaws & handle

PART NO. SIZE(INCH)

JAW WIDTH(MM)

JAW OPENING(MM)

THROAT DEPTH(MM) PRICE

53320400 4” 102 132 74 €77.50

53320600 6” 153 206 95 €129.50

53320800 8” 203 225 105 €175.00

PART NO. COMPATIBLE VICE PRICE

533204-B 53320400 €10.95

533206-B 53320600 €17.95

533208-B 53320800 €20.95

PART NO. SIZE CONNECTION LIST PRICE OFFER PRICE

53399000 20m x 10mm 3/8” €319.14 €249.00

53399100 18m x 12mm 1/2” €319.14 €249.00

PART NO. SIZE CONNECTION LIST PRICE OFFER PRICE

53399600 9m x 8mm 1/4” €120.78 €95.00

53399700 15m x 10mm 1/4” €120.78 €110.00

GUARANTEED Unbreakable*

AIR/WATER AIR only

NEW

NEW

• Compact design

• PVC hose

• 180 degree pivoting wall bracket

• Polypropylene case

• Brass swivel assembly

• 53399600 - Suitable for compressed air up to 10 bar working pressure

• 53399700 - Suitable for compressed air up to 20 bar working pressure

• 12v 1300 amp lightweight, compact & powerful Ultracapacitor Booster Pack with backup lithium battery

• Easy & Quick Recharge: hybrid technology allows booster to be charged from the vehicle’s battery or if highly discharged the backup lithium battery can be used instead, this takes 1 - 4 minutes depending on method used

• 10,000 Cycles / 10 Year Life Span

• Operating Temperature Range: -40°C +65°C

• Override Mode to start engine without any battery mounted

• Glow Mode for cold start of diesel engine

• Protection against short-circuits and reverse polarity

• Digital display shows capacitor charging level and vehicle’s battery voltage

• Rotomolded case with lifetime warranty

• Fully insulated Heavy-Duty curved clamps

WORKSHOP TOOLS

€449.00

€439.00INCLUDES FREE ACCU-SMART WORTH €60.36INCLUDES LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY

+Pro-Start 800 Booster Pack with Free 12v 4 Amp Accu-Smart Battery Charger

• 12v Pro-Start 800 Booster Pack with 800 cranking amps and 2370 peak amps

• AGM internal batteries

• Double insulated starting cables – 1.30/1.35 mtrs length

• Illuminated voltmeter indicates booster charge level, booster and alternator function

• Curved jaw clamps, fully insulated

• Single-piece, shock resistant, moulded case

896124SP - Accu-Smart 12v 4 Amps Battery Charger

• Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries

TWO YEAR WARRANTY

HYBRID ULTRACAPACITOR BATTERY BOOSTER


• One man operation for brake & clutch bleeding

• Auto power OFF when min level reached

• Includes aluminium SP Euro cap - angled screw type

• Reverse polarity warning

• Stainless steel body

• Pump c/w auto shut off valve

• 5L reservoir / 4m cable

• 0 to 6 bar

• ABS compatible

343001V2

02725000

660926SP

02729500

34400500

€797.00

Braking

12v Automatic Brake Bleeder

BRAKE PIPE FLARING TOOLS - Combined DEAL

Flaremaster2 Brake Pipe Flaring Kit - 4.75mm

Flaremaster2 - Brake Pipe Flaring Tool

240v Electric Brake Bleeder

The Original Hand Held Automotive Brake Pipe Flaring Tool

• Quick-release chuck for positive engagement of the punch

• Fast-turn coarse thread on hydraulic ram, for quick assembly

• Locking bolt with swivel pin, for fast tightening

• Inter-changeable dies, held in place by magnets

• Enhanced bridge unit for greater strength

• Re-designed, ergonomic, handle moulding, for greater comfort

• Creates SAE & DIN single and double flares (4.75mm & 3/16” pipe)

• Adjustable for pipe diameters: 3-16mm (1/8”-5/8”)

• Allows protective nylon coating (seen in particular VAG and GM models) to be removed prior to flaring the brake pipe

• Prevents ‘bad flares’ which occur when brake pipe is flared with coating on which can lead to leakage

• Enables pipe to be flared without puncturing plastic coating

• New textured design allows coated brake pipe to be easily gripped

Flaremaster2 - Kit with Compatible ToolsIncludes:

• 02725000 - Flaremaster2

• 02160000 - Brake Pipe Aid Plier

• 02210000 - Telescopic Pipe Tube Cutter: 3-32mm

• 02730000 - Pipe Deburring Tool: 3.2-16mm

• One man operation for brake & clutch bleeding

• Impact resistant housing

• Long supply hose (3.2m) allows for use with vehicle raised on a ramp

• Includes aluminium SP Euro cap - angled screw type

• Weight: 10kg

• 0 to 6 bar

• ABS compatible

NEW

+WITHOUT USING TOOL USING TOOL

02720300

BEFORE AFTER

BRAKE PIPE COATING REMOVAL TOOLCOATED BRAKE PIPE DIES

GRIP TEXTURE

€598.00

€159.95

€193.95

€45.50




SAVE: €32.71

SAVE: €38.61

SAVE: €11.39

special offer

IN SITU SOLUTION


03614000

Braking

Brake Caliper Cleaning Files

‘270’ Series Brake Pipe Flaring Tools Speed, Accuracy and Reliability

Air Assisted Caliper Piston Wind Back Tool Kit

03620100

03620200

02700100

66092500 02340000

0273000002160000

02700800

02700900

Scraping file for removal of course residue on brake calipers

• Special scraping surface saves time and is more effective than standard files because the coarse tooth design will not clog

• Air operated ram applies pressure to the caliper piston, while the handle is rotated by hand

• Easy to use – works on standard workshop air supply

• Reversible – works on both RH and LH applications

• Can be used on Wind Back and Push Back pistons

• Supplied with nine adaptors which cover a wide range of popular vehicles (applications list included)

• Also supplied with 3/8” converter to use with adaptors from manual kit (03619200)

• Metric & imperial pipe sizes

• From 3/16” to 1/2”

• From 4.75mm to 12mm

• Produces both Convex and Double Lap flares to SAE and DIN standards

• Unique ‘ Dial-a-Size’ Turret design

• Lever cam operation for quick flaring

• Automatic punch extraction from flare

• Screw clamp for accurate die alignment

• Variety of kits available to suit requirements

• All components available individually

Suitable for brake pipe sizes:

• SAE Single & Double Lap flares - 3/16” & 4.75mm


• SAE Single and Double flares - 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm

• DIN Single flares - 4.75mm


• SAE Single and Double flares - 3/16, 1/4”, 4.75, 6mm

• DIN Single flares - 4.75mm

• One-hand operation, ideal for on-the-vehicle working

• Suitable for use on pipes from 3 - 25mm

• For forming tight bends in brake and clutch pipes

• Ideal for use in restricted space and for use on-the-vehicle

• Can also be used for quick tube nut thread alignment and as a guide when cutting tube

• For 3/16” or 4.75mm pipe

• Essential tool when preparing to flare copper brake pipe, to avoid the risk of swarf in the pipe

• Double ended tool for the deburring of Brake & Fuel Pipes when preparing ends for use

• Works on all types of copper, steel and brass pipes

• Pipe Sizes: 1/8” (3.2mm) to 5/8” (16mm)

• This tool has been especially designed to allow the user to inspect brake pipes for corrosion, both quickly and easily

• It features two scraper areas on the head of the tool, which allows the user to remove dirt and corrosion from the pipes, and thereby be able to effectively examine the condition of the pipes

MINI PIPE TUBE CUTTER 3 - 25MM BRAKE PIPE CORROSION TOOL

PIPE DEBURRING TOOL - 3.2-16MMBRAKE PIPE AID PLIERS

SPECIAL EXTRA SLIM MODEL FOR JAPANESE VEHICLES

BRAKE PIPE FLARING KIT



€188.00

€102.50

€217.00

€299.00

€36.50

€17.95

€29.95

€33.95

€8.50

€9.50











SAVE: €38.86

SAVE: €17.14

SAVE: €45.20

SAVE: €77.20

SAVE: €7.90

SAVE: €3.65

SAVE: €6.47

SAVE: €8.17

SAVE: €1.70

SAVE: €1.89

Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United KingdomTel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: [email protected] www.sykes-pickavant.comALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OEPRICES VALID UNTIL 31ST AUGUST 2018 - REF: SP218EUR COPYRIGHT 2018 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED

Distributor Stamp:www.sykes-pickavant.com 01543 679900

€74.95

€53.50

pullers

Slide Hammers & Split Collet Extractors

fast fit MICRO PULLER

mechanical Twin/Triple Leg Puller Kit Hydraulic Twin/Triple Leg Puller Kit

4 WAY MINI PULLER

09580000

09580300 09580400

09580100

• Extract components quickly and efficiently when conventional pullers cannot be used

• Removes bearings, oil seals etc.

6.5 -12mm

4 tonne 8 tonne

12-30mm

8.5 -22mm30-60mm

6.5 -60mm

09580200

FIND OUT MORE HERE!

08215000

14500300 15500300

08245000

• For removing gears, races, bearings and sprockets on automotive / industrial applications

• Makes 3 different twin/triple leg pullers

• Spread: 75 - 150mm

• Reach: 150mm

• Supplied in cardboard box

• Also available in metal case as p/n 15500000

• For removing gears, races, bearings and sprockets on automotive / industrial applications

• Makes 3 different twin/triple leg pullers

• Spread: 50 - 150mm

• Reach: 150mm

• Supplied in cardboard box

• For rapid removal of small bearings

• Covers a wide range of automotive and engineering applications including: alternators/generators, domestic appliances, power tools and pumps

• Self-centring force screw with ‘T’ bar and 13mm hexagon drive

• Drop forged legs with independent leaf springs

• Securing collar tightens under load for positive, non slip pulling action

• Suitable for ISO referenced bearings

• 1 tonne capacity

• Ideal for windscreen wiper arms

• Unique 4 way design allows for 4 different jaw widths to be selected

• Reversible and interchangeable legs

• Removable centrepiece for wider application coverage

• Capacity from 19-36mm

€130.95

€296.50

€169.95

€554.95

€202.95

€242.95€197.95

MADE IN THE UK

Documents

Specialist Tool Solutions New Products EUR.pdf · HYDRAULIC HUB PULLER KIT ... • Pressure is placed on the outside of the bearing ring for bearing ... 100 TONNE HAND OPERATED &