Upload
zoran-tesla-borojevic
View
228
Download
0
Embed Size (px)
Citation preview
8/13/2019 Special Observation Cars ENG V052010
1/14
8/13/2019 Special Observation Cars ENG V052010
2/14
Page 2/14
SPECIAL OBSERVATION CAR SERIES
TECHNICAL SHEET
Ed. 01
Three car lines are available and pre-designed, difference each other by shape,contour or type of frame or elevator traccion.
M@TRIX Line.
VECTOR Line.
CENTURY Line. According to this shapes and contours, car model area classified. Type of frame isconsidered.
Design points to have to be considered in each order:
Internal & External Finishing:- Metallic internal & External.- Customized Painted Steel, or special Stainless Steel are available.- Internal Car walls in: Painted Steel, Stainless Steel, Stainless Steel Mesh, High Pressure
laminated ("formica"), granite, Special woods,...- Canopies: Smooth, Punched, with metallic Mesh, painted, iluminated,...
Floor Finishing:- Natural granites & marbles. Special Lightweight ones.- Synthetic: Compaq Quarz, Silestone.
Handrails:- Position. Panoramic sides (mandatory according to standards), not panoramic wallsoptionals.
- Endings and fixations points.- Diameter & configuration: simple bar, double, triple.- Finishing.
Lighting:- It has a number of default and recomended settings.- Customizing in finishing and configuration are available.- Use of fluorescent, led light, optic fiber, neon,...Ambient light can me modified by usingdifferent light temperatures.
Other accesories:- Inlet and Outlet Ventilation, Air conditioner.- Special adaptations for Control operation pannel or screens. Music pre-installation.- Outdoor or indoor installation & IP degree of protection.
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
3/14
Line M@TRIX
Page 3/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
- For SLING Frame Cars:
Clasification:
- P: Sling Frame.
- 1XX = Car flush from the wall. - 2XX = Car with shape adapted to shaft. - 3XX = Car flush from the wall completelly panoramic.
- X00 = Panoramic wall with joints profiles. - X10 = Panoramic wall without joints profiles (Glass-Glass joint). - X20 = Panoramic wall with Curved joint profiles. - X30 = Panoramic wall without joint profiles and Glass curved corners (1).
(1) - Minimum bending radius 400mm.
MODELO MATRIX_P110MODELO MATRIX_P100 MODELO MATRIX_P210MODELO MATRIX_P200 MODELO MATRIX_P300
MODELO MATRIX_P130 MODELO MATRIX_P131MODELO MATRIX_P120
MODELO MATRIX_P231MODELO MATRIX_P230MODELO MATRIX_220
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
4/14
Page 4/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
Line M@TRIX
MODELO MATRIX_M110MODELO MATRIX_M100 MODELO MATRIX_M210
MODELO MATRIX_M131MODELO MATRIX_M130MODELO MATRIX_M120
Clasification:
- M: Cantilever Frame.
- 1XX = Car flush from the wall. - 2XX = Straight car with angled panoramic wall.
- X00 = Panoramic wall with joints profiles. - X10 = Panoramic wall without joints profiles (Glass-Glass joint). - X20 = Panoramic wall with Curved joint profiles. - X30 = Panoramic wall without joint profiles and Glass curved corners (1).
(1) - Minimum bendig radius 400mm.
- For CANTILEVER Frame Cars:
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
5/14
Line VECTOR
Page 5/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
VECTOR_P100 VECTOR_P210VECTOR_P200VECTOR_P110
VECTOR_P310 VECTOR_P400 VECTOR_P410
VECTOR_P500 VECTOR_P501
VECTOR_P300
Clasification:
- P: Sling Frame - 1XX = Pyramid shaped car flushed from the wall. - 2XX = Pyramid shaped car with shape adapted to shaft. - 3XX = Semicircular shaped car flushed from the wall. - 4XX = Semicircular shaped car with shape adapted to shaft. - 5XX = "Keyhole" car "bombilla" with shape adapted to shaft.
- X00 = Panoramic wall with joints profiles. - X10 = Panoramic wall without joints profiles (Glass-Glass joint).
Car Models 500, are subject to bending possibilities.
- For SLING Frame Cars:
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
6/14
8/13/2019 Special Observation Cars ENG V052010
7/14
Line CENTURY
Page 7/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
MODELO CENTURY_100 MODELO CENTURY_110
MODELO CENTURY_200 MODELO CENTURY_210
Clasification:
Design for open shaft and Sling frame with Bottom direct Jack.
- 1XX = Car with straight doors. - 2XX = Car with circular doors.
Car dimensions are conditional upon bending possibilities or to
Door dimension (in case of circular door).
- For SLING Frame Cars:
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
8/14
ANCILLARIES & COMPLEMENTS:
1.CANOPIES:
Page 8/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
MAIN CHARACTERISTICS.
Models:- T10/B10 : Conical or Pyramidal shape according to shapes and car contours.
- T20/B20 : Sferic or Semi-circular shape according to shapes and car contours . - T30/B30 : Rectangular canopy. - T40 : Top safety barrier TSB with an special finishing around the car roof. - B40 : Bottom Canopy which covers car floor structure. Frame could be seen. - T50 : Roof covered and flushed in one part, and protected wiht special TSB near the frame. - B00 : Bottom without canopy.
Materials & Finishing:- Standard: Canopies finishing should be the same as selected to external car covering.
- Optional: Other materials and finishings could be available under consultation.
Special Cases:Special canopies, with special designs need a previous study of viability of materials, shapes & dimensions.Final dimensions are related to shaft dimensions.
TOP CANOPIES
T10 - Pyramidal T20 - Sferic T30 - Straight T40-Top safety barriers TSB T50 - Flushed + TSB barandilla
CUPULAS INFERIORES
B10 - Pyramidal B20 - Sferic B30 - Straight B40-Flushed to floor B00 - Without
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
9/14
8/13/2019 Special Observation Cars ENG V052010
10/14
Page 10/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
- 2.2. Indirect Light Program:
Indirect light design with or without spots addition.Program prescribed for straight line car as M@TRIX . Rest of models requires an study.
Some patterns are avaible if are tailored tocar shape.
Luz Indirecta
L u z
I n d i r
e c
t a
L u z
I n d i r
e c
t a
- Luz Indirecta - Luz Indirecta + Spots
Indirect Light
I n d i r
e c
t l i
g h t
I n d i r
e c
t l i
g h t
- Indirect Light - Indirect Light + Spots
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
11/14
Page 11/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
- 3. LIGHTING PROGRAM FOR CARS WITH SHAPE ADAPTED TO SHAFT:
Car area is divided into 2 zones to be iluminated: + Lp = Panoramic Zone. + Li = Entrance and Not panoramic Zone.
3.1. Pre-designed options for Lp zone are as follows:
Spots Cristal matizado
Metacrilato+Fluorescentes Mixto Spots + Fluorescentes
Lp010 Lp020
Lp040Lp030
Lp110 Lp120
Lp140Lp130
Lp210 Lp220
Lp240Lp230
Lp310 Lp320
Lp330 Lp340
Lp321
Tempered Glass
Methacrylate+Fluorescents lamps Mixed Spots + Fluorescents Lamps
- It is possible to adapt tp LP zone designs of punched plates PCP or EMESA standards.
3.2. For Li Zone, we have the following options:
- Indirect Light, Light by fluorescents lamps, or the 2 solutions mixed.
L u z
I n d i r
e c
t a
L u z
I n d i r
e c
t a
Li 030Li 010 Li 020
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
12/14
8/13/2019 Special Observation Cars ENG V052010
13/14
Page 13/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
4.HAND RAIL:
MAIN CHARACTERISTICS:
4.1 POSITION:
- Mandatory situation in panoramic wall acc. EN-81.1 y81.2 standards.- Whole car perimeter or individual in each wall.
- Handrail height for handicapted people acc. EN-81.70.- Optional other positions: vertical,...
EXAMPLES:
A
B
C
GLASS
FIJACIONES CON PIES AL SUELO
PASAMANOS
PIES AL SUELO
PASAMANOS REMATEEN CHAFLAN
CRISTAL
FOOT TO FLOOR
HANDRAIL
ANGLED HANDRAILFINISHING
FIXING WITH FOOTS TO FLOOR
REMATES EN TT ENDINGS
4.2 MATERIALS & FINISHINGS:
- Standard : Polish Stainless Steel.- Optional: - Satin Stainless Steel. - Painted with customized RAL colour. - Wooden made with metallic endings and fixations.
- Diameters 28/30 or 38/40 accordin to order.- Handrail with simple, double or triple bar.
- Endings. - Straight to wall. - Curved elbow. - Floor fixations with feets.
GLASS
PASAMANOS
PROFILES
FIJACIONES A LOS POSTES
CRISTAL
HANDRAILS
POSTES
FIXING TO VERTICAL PROFILES
Manufactured by Emesa
8/13/2019 Special Observation Cars ENG V052010
14/14
Page 14/14TECHNICAL SHEET
Ed. 01SPECIAL OBSERVATION CAR SERIES
4.FLOORS:
- Material: - Standard: Natural Granites & Marbles (EMESA standard catalogue).
- Optionals:
- Synthetic Materials (Compac Quartz,Silestone).
- Special Granite, marble or stone.
- Lightweight Granite or marble .
- Carpets, glass .
- Non Slippery finishing. (Under consultation according to material selected).
- Especial Design of floors: Shapes, cutbacks, Anagrams, inclusions of different materials,..
5.ENTRANCE:
- Material: - In no note is underline, are manufactured in the same material and finishing of car profiles.
- Indicated in order.
- Special Designs: Glass Entrance.
- Apron Toeguard finishing should be always indicated. On the contrary will be manufactured in GalvanyzedSteel.
Manufactured by Emesa P a n o r a m
i c s p e c
i a l c a r s
_ V 0 1
_ E N G
_ V 0 5 2 0 1 0