8/10/2019 Sparge Rs
1/2
Spargers
for Reaction Vessels
6453-105
6452-03
6453-04
6452-104
Use 5853-06 Ace-Safe
Connector here
6453 SPARGER Straight with Hose ConnectionStraight sparger tube
with Ace Frit at one end, size F hose connection atopposite end for
1/2" I.D. hose.
OverallLength, mm Porosity
Tube O.D.,mm
OrderCode Each
400 A (145-174) 10 6453-04 74.34400 B (70-100) 10 6453-06
74.34400 C (25-50) 10 6453-08 74.34575 A (145-174) 14 6453-21
78.91575 B (70-100) 14 6453-23 78.91575 C (25-50) 14 6453-25
78.91775 B (70-100) 14 6453-32 82.34915 B (70-100) 14 6453-45
84.62
6453 SPARGER Straight with Ace-ThredStraight sparger tube with
Ace Frit at one end, #11 OR #15 Ace-Thredconnection at opposite
end. Supplied with 5029-10 Nylon Bushing and FETFEO-Ring.
OverallLength, mm Porosity
Tube O.D.,mm
OrderCode Each
400 A (145-174) 10 6453-105 129.24400 B (70-100) 10 6453-107
129.24400 C (25-50) 10 6453-109 129.24575 A (145-174) 14 6453-122
131.53575 B (70-100) 14 6453-124 131.53575 C (25-50) 14 6453-126
131.53775 B (70-100) 14 6453-133 131.53915 B (70-100) 14 6453-146
138.39
6452 SPARGER Easy Action Stopcock andHose Connection
Sparger tube with Ace Frit at one end and Easy Action Stopcock
with 90size F hose connection at end for 1/2" I.D. hose.
OverallLgth., mm
Porosity StopcockSizeTubing
SizeTube
O.D., mmOrderCode
Each
400 A (145-174) 0-3 5/16" (C) 10 6452-03 168.76400 B (70-100)
0-3 5/16" (C) 10 6452-05 168.76400 C (25-50) 0-3 5/16" (C) 10
6452-07 168.76575 A (145-174) 0-5 3/8" (E) 14 6452-14 194.81575 B
(70-100) 0-5 3/8" (E) 14 6452-16 194.81575 C (25-50) 0-5 3/8" (E)
14 6452-18 194.81775 B (70-100) 0-5 3/8" (E) 14 6452-33 203.87915 B
(70-100) 0-5 3/8" (E) 14 6452-44 209.53
6452 SPARGER Easy Action Stopcock and #7 Ace-ThredSparger tube
with Ace Frit at one end and Easy Action Stopcock and with a90 #7
Ace-Thred connection at opposite end. Supplied with 5029-10
NylonBushing and FETFE O-Ring.
OverallLength, mm Porosity
StopcockSize
Tube O.D.,mm
OrderCode Each
400 A (145-174) 0-3 10 6452-104 209.53400 B (70-100) 0-3 10
6452-106 209.53400 C (25-50) 0-3 10 6452-108 209.53575 A (145-174)
0-5 14 6452-121 214.07575 B (70-100) 0-5 14 6452-123 214.07575 C
(25-50) 0-5 14 6452-125 214.07775 B (70-100) 0-5 14 6452-132
225.39915 B (70-100) 0-5 14 6452-145 232.18
See reverse side for adapters used with these spargers.
New from ACE...
Subject to ACE Discount
2 0 1 0 2 0 1 0 C
O N T A I N
S
G N I CIR
P
8/10/2019 Sparge Rs
2/2
5030 ADAPTER Midi, #11 Ace-ThredWith ground joint at bottom and
threaded Nylon bushing and FETFE O-Ring at top which tightens
into a #11 Ace-Thred to form a compression seal with 10mm O.D.
rod on bafes. Suitable forvacuum work. Supplied complete with Nylon
bushing, O-Ring and threaded glass adapter. For extraO-Rings, order
7855-708 @ 12.24/12.
JointOrdering
CodeGlass
MemberOrdering
CodeNylon
BushingOrderCode Complete
24/40 5030-06 25.45 7506-02 9.31 5030-22 34.7629/42 5030-08
29.83 7506-02 9.31 5030-24 39.1445/50 5030-60 45.83 7506-02 9.31
5030-19 55.14
5030 ADAPTER Midi, #15 Ace-ThredWith ground joint at bottom and
threaded Nylon bushing and FETFE O-Ring at top which tightensinto a
#15 Ace-Thred to form a compression seal with 13mm O.D. rod on
bafes. Suitable forvacuum work. Supplied complete with Nylon
bushing, O-Ring and threaded glass adapter. For extraO-Rings, order
7855-716 @ 15.68/12.
JointOrdering
Code
Glass
Member
Ordering
Code
Nylon
Bushing
Order
Code Complete24/40 8042-15 27.03 7506-06 10.09 5030-40
37.1229/42 8042-17 28.89 7506-06 10.09 5030-42 38.9845/50 8042-21
43.77 7506-06 10.09 5030-45 53.86
Adapters for
Use with ACESpargers U s e # 11 Ad a pt e r s w i t h
10 m m O . D .S pa r g e r s
U s e # 1 5
A d a p t e r s w i t h
1 4 m m O . D . S p a r g e r s
Subject to ACE Discount
P.O. Box 688 Vineland, NJ 08362-0688 856-692-3333 Fax:
856-692-8919
TOLL-FREE: 1-800-223-4524 FAX: 1-800-543-6752
www. aceglass .com email: [email protected]
Order Code Each Order Code EachSpray Disc, 1/4" MPT 6472-200
553.71 Nipple, 1/4" MPT 6472-208 2.92Coupling, 1/4" FPT 6472-201
4.14 Adapter, Glass, 45/50, #15 8042-21 43.77Extension Tube, 24",
1/4" MPT 6472-204 19.28 Nylon Bushing & O-Ring, #15 7506-06
10.09Elbow, 1/4" FPT 6472-206 7.67 Complete 6472-210 641.58*Depends
on wash solution
A co n ve n ie n t so l u t io n fo r
c lea n i ng yo u r AC E reac to r
w i t h o u t d i s ma n t l i ng i t!
A co n ve n ie n t so l u t io n fo r
c lea n i ng yo u r AC E reac to r
w i t h o u t d i s ma n t l i ng i t!
The ACEClean-In-PlaceSprayer
The ACEClean-In-PlaceSprayer
Pressure Flow Rate(PSI) L/Min GPM
15 16 4.2220 19 5.0130 23 6.0740 26 6.8650 29 7.6560 33 8.71
This handy sprayer cleans large scale reactors without having to
dismantle thepilot plant.
The stainless steel tube has a series of holes that spray onto a
carbon-filled PTFErotating disk fitted to the end of the stainless
steel shaft that spins with thepressure from the water or cleaning
agent that comes out of the orifice. The diskproduces a 39"
diameter by 360 spray pattern to simultaneously cover and washthe
entire inner surfaces of the reactor. The working pressure is 15-60
PSI;maximum temperature is 220C*. See the chart at the upper right
for pressuresand flow rates.
The sprayer will fit through a 1- 1 / 8" diameter opening and
can be used with a45/50 joint to #15 Ace-Thred adapter. The
complete CIP sprayer consists of astainless steel coupling and 24"
extension tube, elbows and nipple, a 45/50
joint to #15 Ace-Thred glass adapter with a nylon bushing and
FETFE o-ring.
11/2/2009
Prices and specications subject to change without no
