Embed Size (px)
Citation preview
Fire Alarm Systems | SP2 Series Wall‑mount Speaker Strobes
The System Sensor SP2 Series Wall‑mount Speaker Strobesprovide the sound quality essential to voice evacuation witha broad frequency range and low harmonic distortion forcrystal clear sound performance, making them ideal forhotel, hospital, and commercial applications. The strobeshave field‑selectable settings for 15, 15/75, 30, 75, and110 cd. These speaker strobes have a field‑reversible strobeallowing the speaker to be mounted either on the right orleft to avoid potential obstructions.
Certifications and Approvals
System Sensor holds these Listings and Approvals:
Region Certification
USA UL UUKC: Signaling Appliances andEquipment for the Hearing Impaired(UL1971), UUMW: Speakers andAmplifiers for Fire Protective SignalingSystems (UL1480, UL1711, and UL2043)
CSFM 7320-1653: 133
NYC/MEA 127‑02‑E
Installation/Configuration Notes
Compatible ProductsThe following products are compatible with the SP2 SeriesSpeaker Strobes:
Category Product ID Product Description
ControlPanels
Compatible with all 24 V Bosch Control Panels when used incontinuous mode. For synchronization, use an SSMDL orSSMDLW Synchronization Module.
Modules SSMDL Synchronization module (red)
SSMDLW Synchronization module (white)
Mounting ConsiderationsThese strobes can be mounted on the indicated back boxesfor the indicated applications:
ConduitApplications
SurfaceMounted
FlushMounted
four‑inch square • •* •
*Surface mounting on a four‑inch square back box requiresthe use of an SSBBS‑SP2 Back Box Skirt.
Strobe CautionsDo not exceed:
• The voltage range for the chosen nominal voltage (8 Vto 17.5 V for 12 V nominal or 16 V to 33 V for 24 Vnominal)
• 70 strobes and a maximum line impedance of 4 Ω perloop when using a synchronization module
SP2 Series Wall‑mount Speaker Strobes▶ High intelligibility
▶ Low profile design
▶ Low current draw
▶ Power taps of ¼, ½, 1 and 2 watts
▶ Compatible with 25 V or 70.7 V distribution amplifiers
▶ Dual voltage in one unit (12 V and 24 V)
▶ Selectable candela settings of 15 cd and 15/75 cd forthe 12 V model and 15, 15/75, 30, 75, and 110 cd forthe 24 V model
▶ Synchronizable with the MDL Sync•Circuit Module
www.boschsecurity.com
2 | SP2 Series Wall‑mount Speaker Strobes
• The maximum line impedance of the control panel
Wiring
Note These strobe units are not recommended foruse in coded or pulsed signaling circuits.
The input terminals accept wires with diameters between18 AWG (1.2 mm) and 12 AWG (2.3 mm).
Parts Included
Quant. Component
1 SP2 Speaker Strobe
1 Hardware pack
1 Literature pack
Technical Specifications
Environmental Considerations
Temperature (Operating): +32°F to +120°F (0° to +49°C)
Mechanical Properties
Candela Selections: 15 cd1, 15/75 cd1, 30 cd2, 75 cd2, or110 cd2
Dimensions (H x W x D): 4.875 in. x 8.25 in. x 2.25 in.(12.4 cm x 21 cm x 5.7 cm)
Material: Molded plastic enclosure incorporating aXenon flashtube.
Sound Level(UL Reverberant Room)at 10 ft (3 m):
¼ W: 75 dBA½ W: 78 dBA1 W: 81.2 dBA2 W: 84 dBA
Speaker Frequency: 400 Hz to 4 kHz
1 When set at these settings (15 cd or 15/75 cd) the devicesautomatically work on both 12 V and 24 V power supplies.The 15/75 cd selection is listed at 15 cd per UL1971 butprovides 75 cd on axis.
2 The strobe is not listed for 12 V operating voltages whenset to these selections (30 cd, 75 cd, and 110 cd). Whenusing a 12 V control panel, this device yields required lightoutput only in the 15 cd and 15/75 cd settings.
Power Requirements
Maximum Operating Strobe Current(12 VDC):
15 cd: 127 mA RMS15/75 cd: 127 mA RMS
Maximum Operating Strobe Current(12 VFWR):
15 cd: 112 mA RMS15/75 cd: 135 mA RMS
Maximum Operating Strobe Current(24 VDC):
15 cd: 59 mA RMS15/75 cd: 69 mA RMS30 cd: 90 mA RMS75 cd: 160 mA RMS110 cd: 209 mA RMS
Maximum Operating Strobe Current(24 VFWR):
15 cd: 64 mA RMS15/75 cd: 74 mA RMS30 cd: 93 mA RMS75 cd: 158 mA RMS110 cd: 208 mA RMS
Speaker Voltage (Input): 25.0 VRMS or70.7 VRMS, selectable
Strobe Voltage (Input): 12 VDC or FWR unfiltered or24 VDC or FWR unfiltered
TrademarksTrademark names are used throughout this document. Inmost cases, these designations are claimed as trademarksor registered trademarks in one or more countries by theirrespective owners. Rather than placing a trademark symbolin every occurrence of a trademark name, Bosch SecuritySystems, Inc. uses the names only in an editorial fashionand to the benefit of the trademark owner with no intentionof infringing the trademark.
Sync•Circuit is a trademark of System Sensor in the United States and othercountries.
System Sensor is a registered trademark or a trademark of Pittway Interna-tional, Ltd. in the United States and other countries.
Americas:Bosch Security Systems, Inc.130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 [email protected]
Europe, Middle East, Africa:Bosch Security Systems B.V.P.O. Box 800025600 JB Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 [email protected]
Asia-Pacific:Robert Bosch (SEA) Pte Ltd, Security Systems11 Bishan Street 21Singapore 573943Phone: +65 6258 5511Fax: +65 6571 [email protected]
Represented by
© Bosch Security Systems Inc. 2010 | Data subject to change without noticeT1124663563 | Cur: en-US, V5, 4 Jul 2010
SP2 Series Wall‑mount Speaker Strobes | 3
Ordering Information
SP2R1224MC Speaker Strobe (red)Red, 12 VDC or 24 VDC device with dual volt-age capability (25 VRMS or 70 VRMS), field‑se-lectable taps from 1/4 W to 2 W, and field‑se-lectable strobe intensities of 15 cd, 15/75 cd,30 cd, 75 cd, and 110 cd
SP2R1224MC
SP2W1224MC Speaker Strobe (white)White, 12 VDC or 24 VDC device with dualvoltage capability (25 VRMS or 70 VRMS),field‑selectable taps from 1/4 W to 2 W, andfield‑selectable strobe intensities of 15 cd,15/75 cd, 30 cd, 75 cd, and 110 cd
SP2W1224MC
Accessories
SSBBS‑SP2W Back Box Skirt (white)Back box must be a standard 4‑inch square by2‑1/8 in. deep
SSBBS-SP2W
SSBBS‑SP2R Back Box Skirt (red)Back box must be a standard 4‑inch square by2‑1/8 in. deep
SSBBS-SP2R
www.boschsecurity.com
4 | SP2 Series Wall‑mount Speaker Strobes
Americas:Bosch Security Systems, Inc.130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 [email protected]
Europe, Middle East, Africa:Bosch Security Systems B.V.P.O. Box 800025600 JB Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 [email protected]
Asia-Pacific:Robert Bosch (SEA) Pte Ltd, Security Systems11 Bishan Street 21Singapore 573943Phone: +65 6258 5511Fax: +65 6571 [email protected]
Represented by
© Bosch Security Systems Inc. 2010 | Data subject to change without noticeT1124663563 | Cur: en-US, V5, 4 Jul 2010
