8/9/2019 sp 1001 R3 add1,2,3

1/159

8/9/2019 sp 1001 R3 add1,2,3

2/159

8/9/2019 sp 1001 R3 add1,2,3

3/159

8/9/2019 sp 1001 R3 add1,2,3

4/159

8/9/2019 sp 1001 R3 add1,2,3

5/159

8/9/2019 sp 1001 R3 add1,2,3

6/159

8/9/2019 sp 1001 R3 add1,2,3

7/159

8/9/2019 sp 1001 R3 add1,2,3

8/159

8/9/2019 sp 1001 R3 add1,2,3

9/159

8/9/2019 sp 1001 R3 add1,2,3

10/159

8/9/2019 sp 1001 R3 add1,2,3

11/159

8/9/2019 sp 1001 R3 add1,2,3

12/159

8/9/2019 sp 1001 R3 add1,2,3

13/159

8/9/2019 sp 1001 R3 add1,2,3

14/159

8/9/2019 sp 1001 R3 add1,2,3

15/159

8/9/2019 sp 1001 R3 add1,2,3

16/159

8/9/2019 sp 1001 R3 add1,2,3

17/159

8/9/2019 sp 1001 R3 add1,2,3

18/159

8/9/2019 sp 1001 R3 add1,2,3

19/159

8/9/2019 sp 1001 R3 add1,2,3

20/159

8/9/2019 sp 1001 R3 add1,2,3

21/159

8/9/2019 sp 1001 R3 add1,2,3

22/159

8/9/2019 sp 1001 R3 add1,2,3

23/159

8/9/2019 sp 1001 R3 add1,2,3

24/159

8/9/2019 sp 1001 R3 add1,2,3

25/159

8/9/2019 sp 1001 R3 add1,2,3

26/159

8/9/2019 sp 1001 R3 add1,2,3

27/159

8/9/2019 sp 1001 R3 add1,2,3

28/159

8/9/2019 sp 1001 R3 add1,2,3

29/159

8/9/2019 sp 1001 R3 add1,2,3

30/159

8/9/2019 sp 1001 R3 add1,2,3

31/159

8/9/2019 sp 1001 R3 add1,2,3

32/159

8/9/2019 sp 1001 R3 add1,2,3

33/159

8/9/2019 sp 1001 R3 add1,2,3

34/159

8/9/2019 sp 1001 R3 add1,2,3

35/159

8/9/2019 sp 1001 R3 add1,2,3

36/159

8/9/2019 sp 1001 R3 add1,2,3

37/159

8/9/2019 sp 1001 R3 add1,2,3

38/159

8/9/2019 sp 1001 R3 add1,2,3

39/159

8/9/2019 sp 1001 R3 add1,2,3

40/159

8/9/2019 sp 1001 R3 add1,2,3

41/159

8/9/2019 sp 1001 R3 add1,2,3

42/159

8/9/2019 sp 1001 R3 add1,2,3

43/159

8/9/2019 sp 1001 R3 add1,2,3

44/159

8/9/2019 sp 1001 R3 add1,2,3

45/159

8/9/2019 sp 1001 R3 add1,2,3

46/159

8/9/2019 sp 1001 R3 add1,2,3

47/159

8/9/2019 sp 1001 R3 add1,2,3

48/159

8/9/2019 sp 1001 R3 add1,2,3

49/159

8/9/2019 sp 1001 R3 add1,2,3

50/159

8/9/2019 sp 1001 R3 add1,2,3

51/159

8/9/2019 sp 1001 R3 add1,2,3

52/159

8/9/2019 sp 1001 R3 add1,2,3

53/159

8/9/2019 sp 1001 R3 add1,2,3

54/159

8/9/2019 sp 1001 R3 add1,2,3

55/159

8/9/2019 sp 1001 R3 add1,2,3

56/159

8/9/2019 sp 1001 R3 add1,2,3

57/159

8/9/2019 sp 1001 R3 add1,2,3

58/159

8/9/2019 sp 1001 R3 add1,2,3

59/159

8/9/2019 sp 1001 R3 add1,2,3

60/159

8/9/2019 sp 1001 R3 add1,2,3

61/159

8/9/2019 sp 1001 R3 add1,2,3

62/159

8/9/2019 sp 1001 R3 add1,2,3

63/159

8/9/2019 sp 1001 R3 add1,2,3

64/159

8/9/2019 sp 1001 R3 add1,2,3

65/159

8/9/2019 sp 1001 R3 add1,2,3

66/159

8/9/2019 sp 1001 R3 add1,2,3

67/159

8/9/2019 sp 1001 R3 add1,2,3

68/159

8/9/2019 sp 1001 R3 add1,2,3

69/159

8/9/2019 sp 1001 R3 add1,2,3

70/159

8/9/2019 sp 1001 R3 add1,2,3

71/159

8/9/2019 sp 1001 R3 add1,2,3

72/159

8/9/2019 sp 1001 R3 add1,2,3

73/159

8/9/2019 sp 1001 R3 add1,2,3

74/159

8/9/2019 sp 1001 R3 add1,2,3

75/159

8/9/2019 sp 1001 R3 add1,2,3

76/159

8/9/2019 sp 1001 R3 add1,2,3

77/159

8/9/2019 sp 1001 R3 add1,2,3

78/159

8/9/2019 sp 1001 R3 add1,2,3

79/159

8/9/2019 sp 1001 R3 add1,2,3

80/159

8/9/2019 sp 1001 R3 add1,2,3

81/159

8/9/2019 sp 1001 R3 add1,2,3

82/159

8/9/2019 sp 1001 R3 add1,2,3

83/159

8/9/2019 sp 1001 R3 add1,2,3

84/159

8/9/2019 sp 1001 R3 add1,2,3

85/159

8/9/2019 sp 1001 R3 add1,2,3

86/159

8/9/2019 sp 1001 R3 add1,2,3

87/159

8/9/2019 sp 1001 R3 add1,2,3

88/159

8/9/2019 sp 1001 R3 add1,2,3

89/159

8/9/2019 sp 1001 R3 add1,2,3

90/159

8/9/2019 sp 1001 R3 add1,2,3

91/159

8/9/2019 sp 1001 R3 add1,2,3

92/159

8/9/2019 sp 1001 R3 add1,2,3

93/159

8/9/2019 sp 1001 R3 add1,2,3

94/159

8/9/2019 sp 1001 R3 add1,2,3

95/159

8/9/2019 sp 1001 R3 add1,2,3

96/159

8/9/2019 sp 1001 R3 add1,2,3

97/159

8/9/2019 sp 1001 R3 add1,2,3

98/159

8/9/2019 sp 1001 R3 add1,2,3

99/159

8/9/2019 sp 1001 R3 add1,2,3

100/159

8/9/2019 sp 1001 R3 add1,2,3

101/159

8/9/2019 sp 1001 R3 add1,2,3

102/159

8/9/2019 sp 1001 R3 add1,2,3

103/159

8/9/2019 sp 1001 R3 add1,2,3

104/159

8/9/2019 sp 1001 R3 add1,2,3

105/159

8/9/2019 sp 1001 R3 add1,2,3

106/159

8/9/2019 sp 1001 R3 add1,2,3

107/159

8/9/2019 sp 1001 R3 add1,2,3

108/159

8/9/2019 sp 1001 R3 add1,2,3

109/159

8/9/2019 sp 1001 R3 add1,2,3

110/159

8/9/2019 sp 1001 R3 add1,2,3

111/159

8/9/2019 sp 1001 R3 add1,2,3

112/159

8/9/2019 sp 1001 R3 add1,2,3

113/159

8/9/2019 sp 1001 R3 add1,2,3

114/159

8/9/2019 sp 1001 R3 add1,2,3

115/159

8/9/2019 sp 1001 R3 add1,2,3

116/159

8/9/2019 sp 1001 R3 add1,2,3

117/159

8/9/2019 sp 1001 R3 add1,2,3

118/159

8/9/2019 sp 1001 R3 add1,2,3

119/159

8/9/2019 sp 1001 R3 add1,2,3

120/159

8/9/2019 sp 1001 R3 add1,2,3

121/159

8/9/2019 sp 1001 R3 add1,2,3

122/159

8/9/2019 sp 1001 R3 add1,2,3

123/159

8/9/2019 sp 1001 R3 add1,2,3

124/159

8/9/2019 sp 1001 R3 add1,2,3

125/159

8/9/2019 sp 1001 R3 add1,2,3

126/159

8/9/2019 sp 1001 R3 add1,2,3

127/159

8/9/2019 sp 1001 R3 add1,2,3

128/159

8/9/2019 sp 1001 R3 add1,2,3

129/159

8/9/2019 sp 1001 R3 add1,2,3

130/159

8/9/2019 sp 1001 R3 add1,2,3

131/159

8/9/2019 sp 1001 R3 add1,2,3

132/159

8/9/2019 sp 1001 R3 add1,2,3

133/159

8/9/2019 sp 1001 R3 add1,2,3

134/159

8/9/2019 sp 1001 R3 add1,2,3

135/159

8/9/2019 sp 1001 R3 add1,2,3

136/159

8/9/2019 sp 1001 R3 add1,2,3

137/159

8/9/2019 sp 1001 R3 add1,2,3

138/159

8/9/2019 sp 1001 R3 add1,2,3

139/159

8/9/2019 sp 1001 R3 add1,2,3

140/159

8/9/2019 sp 1001 R3 add1,2,3

141/159

8/9/2019 sp 1001 R3 add1,2,3

142/159

8/9/2019 sp 1001 R3 add1,2,3

143/159

8/9/2019 sp 1001 R3 add1,2,3

144/159

8/9/2019 sp 1001 R3 add1,2,3

145/159

8/9/2019 sp 1001 R3 add1,2,3

146/159

8/9/2019 sp 1001 R3 add1,2,3

147/159

8/9/2019 sp 1001 R3 add1,2,3

148/159

8/9/2019 sp 1001 R3 add1,2,3

149/159

8/9/2019 sp 1001 R3 add1,2,3

150/159

8/9/2019 sp 1001 R3 add1,2,3

151/159

8/9/2019 sp 1001 R3 add1,2,3

152/159

8/9/2019 sp 1001 R3 add1,2,3

153/159

8/9/2019 sp 1001 R3 add1,2,3

154/159

8/9/2019 sp 1001 R3 add1,2,3

155/159

8/9/2019 sp 1001 R3 add1,2,3

156/159

Addendum Specification No. 1001 (June 2008) Substation Equipment

Addendum No.3Clause Article

1001.81 1001-3 1001-3.16.1.1 a

1001.86 1001 -3 1001-3.18.1.1 bParagraph I

1001.93 1001-3 1001-3.19.1.2 aParagraph 2

ActionRevise the article to be read as follows:"Fixture. The fixture shall be provided foroutdoor wide-beam floodlight with build-incontrolgear (ballast, capacitor, ignitor etc.).The housing shall be corrosion resistantaluminum alloy and the reflector shall beanodized high purity aluminum. The frontglass shall be thermal shock resistant safetyglass with the silicone rubber gasket. All metalparts shall be made of non-corrosive material.The fixture shall be jetproof, dustproof andshall conform to IP55, DrN, VDE, lEe class!."Revise the article to be read as follows:"Cap and Pin. The cap and pin shall be of suchdesign that it will not yield or distort u n d e r ~ e specified mechanical load in such a manner asto change the relative spacing of the insulatorsor add other stresses to the shells and shall bemade of a good commercial grade of malleableiron, ductile iron or steel. The insulator capsshall be of the socket type, provided withstainless steel cotter key. The cap shall be trulycircular, with the inner and outer surfacesconcentric, and shall be free from cracks,shrinks, air holes, burrs and rough edges, tominImIZe field concentrations and radio.disturbances. The insulator pins shall be freefrom cracks and air-holes. All bearing surfacesshall be smooth and uniform so as to distributethe loading stresses evenly:'Revise the article to be read as follows:"Bus support clamp bolted type shall befurnished with first melting aluminum aHoy2024-T4 or 7075-T73 bolts. 6061-T6 or 7075T73 nuts, and 7075-T6 or 7075-T73 splitlockwashers and are finished with an anodiccoating and lubricated, or shall be furnished

- 1001.156- (May 2010)

8/9/2019 sp 1001 R3 add1,2,3

157/159

1001.93 1001-3

1001.94 1001-3

1001.110 1001-3

1001.111 1001-3

1001 .19.1.2bParagraph 2

Paragraph 4

Last Paragraph

1001-3.19.1.3 bParagraph 1

Paragraph 2

100 1-3.23.1.2 i

1001-3.23.1.3 a(c)

with stainless steel. manufactured of 18-8materials, bolts, nuts and split lockwashers."Revise the article to be read as follows:"Bolted type connectors shall be furnished withfirst melting aluminum alloy 2024-T4 or 7075T73 boits, 6061-T6 or 7075-T73 nuts, and7075-T6 or 7075-T73 split lock washers and arefinished with an anodic coating and lubricated,or shall be furnished with stainless steel,manufactured of 18-8 materials, bolts, nuts andsplit lockwashers.""All terminal pad drilling holes shall conform toNEMA-CCI. Contact surface of terminal padshall be finished.""Flexible element of expansion terminalconnectors shall be laminated aluminum strap orall aluminum conductors which has currentcapacity equivalent to the tube:'Revise the article to be read as follows:"Compression Terminal. The compressionterminal shall be tubular and made of firstmelting aluminum alloy 1100 or Alcan DIS.The terminal shall have slip strength of not lessthan 30% of ultimate strength of the conductor.All terminal pads drilling holes shall conform toNEMA-CCl.""The position of compression shall be clearlymarked on the surface of each connectors.Contact surface of terminal pad shall befinished."Revise the article to be read as follows:"Audible Noise. The charger audible noiseshall not exceed 60 dB(A) at any point I m fromthe charger cabinet."Revise the article to be read as follows."Potentiometers for adjustment of the 110at andequalize charge voltage levels. Thepotentiometers shall permit voltage leveladjustment to within a maximum of 0.01 V pcr

- 1001.157 (May 2010)

8/9/2019 sp 1001 R3 add1,2,3

158/159

1001.111 1001-3 1001-3.23.1.3 b

1001.112 1001-3 1001-3.23.1.3 cLast Paragraph

1001.138 1001-4 1001-4.26.2 c

battery ce II."

Revise the article to be read as follows.'"Instrumentation. Each charger shall befurnished with the following instrumentsmounted on the front of the cabinet:

- Output DC ammeter- Output DC voltmeter (The change-over

switch to read rectifier voltage, battery voltageand load voltage individually shall be proviqedfor 48 V DC chargee)"Revise the article to be read as follows."Each of the above alarm conditions shall alsocause a common or summary alarm relay tooperate for common remote alarm indication.The rclay shall be completed with an operatingtime delay adjustable from 0 to lOs, auto resetand two electrically separate NO contacts. Thealarm contacts shall be wired to terminal blockpoints for connection to remote alarms byEGAT."Revise the article to be read as follows."Quality Conformance Tests. Number ofsamples required, for each lot of station postinsulator, for the tests shall be performed inaccordance with ANSI C29.9 except thatspecifically noted herein.(a) Visual and dimension test.(b) Porosity test.(e) Galvanizing test.(d) Cantilever strength test. Number ofsamples shall be 0.5 % of the number ofinsulators in the lot. If the percentage does notgive a whole number, then the next wholenumber above shall be chosen.(e) Tensile strength test. Number of samplesshall be 0.5 % of the number of insulators inthe lot. If the percentage does not give a

- 1001.158- (May 2010)

8/9/2019 sp 1001 R3 add1,2,3

159/159

whole number, then the next whole numberabove shall be chosen.(f) Creepage distance measurement. One unitof each rating and type shall be subject to thistest. The test shall be perfonncd on insulatorsbeing supply."

1001.140 1001-4 1001-4.27.4 Add the following sub-clause:Design Tests. These tests may be omitted if adesign test record can be submitted.(a) Corona and RIV test (For 500 kVmiscellaneous hardware only).

1001.141 1001-4 1001.4.31 a Delete (c) Temperature rise test

1001.142 1001-4 1001.4.31 b Add (g) Temperature rise test. One unit of eachrating shall be subject to this test. The test shallbe perfonned on battery charger being supply.

1001.152 1001-3 1001-3.16.1.2 a Revise the article to be read as follows.