Upload
phungkiet
View
222
Download
5
Embed Size (px)
Citation preview
SOUTHERN CROSS SXVSVERTICAL SHAFT DRIVEN CENTRIFUGAL SLURRY PUMPS
HEAVY DUTY, RELIABLE SLURRY PUMPING FROM SUMPS AND PITS
FEATURES
APPLICATIONS
Transfer of Abraisive and High Density Slurries from Sumps and Pits in:MiningIndustryCivil ConstructionCoal PreperationMineral ProcessingChemical ProcessingSugar Industry
OPERATING LIMITS
Capacity 10-1000m3/hourHead up to 40 metresDischarge 40-250mmMax. Solid Size 50mmMotor Sizes 3-200kWOperating Speed 400-2200RPMPumped Liquid Abraisive Slurries
High Density Slurries Solids Laden Water
SXVS-IF-0113
Cantilevered design eliminates shaft sealing requirements.
Column and discharge pipe options available including composite materials.
Cantilever shaft length up to 2400mm.
Deep sump variant available for applications where cantiler design is not suitable.
Quick and easy changeover of wet end.
Drive end bearings have no contact with pumped product, allowing greater wear life.
Wet end stub shaft options available for severe duty applications.
Wide range of wet end construction material options available to suit any application and installation environment.
Removeable upper strainer.
Rubber lined cast iron lower strainer reduces blockages.
OPTIONS
Stub shaft options for severe duty applications.Cantilevered shaft or extension shaft with column bearings.Direct coupled or belt drive with set speed or variable frequency operation.Wet end, column and discharge pipe materials of construction.
PENTAIR SOUTHERN CROSS8618 Warrego Highway, Withcott, QLD 4352, Australia. www.southerncross.pentair.com
All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names are trademarks or registered marks of their respective owners.Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.Pentair is an equal opportunity employer.A.B.N. 83 000 922 690 © 2012 Pentair, Ltd. All Rights Reserved.
© 2012 Pentair Southern Cross
PERFORMANCE
MATERIALS OF CONSTRUCTION
40
30
20
10
00 20 40 60 80 100 200 300 400
Flow Rate (litres/sec)
Tota
l Hea
d (m
)
Flow Rate (m3/h)0 200 400 600 800 1000 1200 1400
40P 65Q 100R 150S 250S200S
Description Standard Material Material Options
Shaft 4140 Mild Steel Available on Request1
Bearing Housing Cast Iron
Column Mild Steel
Upper Strainer Cast Iron Rubber
Lower Strainer Cast Iron
Back Liner 27% Chrome White Iron
Pump Casing 27% Chrome White Iron Rubber Lined White Iron
Impeller 27% Chrome White Iron Rubber
Discharge Pipe Mild Steel Rubber Lined Mild Steel / Composite
Adaptor Plate Mild Steel1. Vertical shaft material options are available to suit a wide range of applications and installations. Contact Pentair Southern Cross to discuss the availability of material options.
Cantilever Shaft Extension Shaft