Upload
extractcraft-llc
View
219
Download
0
Embed Size (px)
DESCRIPTION
Official Source by ExtractCraft User Manual
Citation preview
The Source User Manual iii
1 The Source User Manual
The Source User Manual 2
glass lid
upper seal
reservoir cup
collector
lower seal
base
threaded post
start/stop buttonvacuum relief screw
3 The Source User Manual
Make the tincture.
Supplies
reservoir cup
The Source User Manual 4
reservoir cup
5 The Source User Manual
Turn the screw fully to the RIGHT to seal the chamber.
Mobile app START PROCESS button (When the process is running, the same button is for STOP PROCESS.)
comm icon
Press the green button on the base to start the Source or use the mobile app. One flash of the button lets you know it started.
1 flash = process is starting6 flashes = process is stopping
Plug in the Source.
The Source User Manual 6
If the vacuum pump does not shut off within a few seconds, try pressing down on the lid to help it seal.
Vacuum level quickly reaches 100 if the collector is sealed.
7 The Source User Manual
Use the sliders to set the temperature and run time for the extraction.
The Source User Manual 8
9 The Source User Manual
Here the SOURCE label is upside down
Glass lid
Narrow ring of the upper seal
The Source User Manual 10
The last 4 digits will be the same as those on the serial number sticker near the Source power cord.
11 The Source User Manual
Temp, Vacuum Level, Time Left readouts
START/STOP PROCESS button
Drag to set Temperature
Drag to set Run Time
Menu
comm icon
The Source User Manual 12
Temp, Vacuum Level, Time Left readouts
Drag to set Run Time
Menu
START/STOP PROCESS button
Drag to set Temperature
13 The Source User Manual
The Source User Manual 14
15 The Source User Manual
The Source User Manual 16