Source Automotive Provides The Heavy Duty Track Bars For TrucksSource Automotives widely preferred 2nd Generation track-bar has zero remodelling and failure history. It is the only well-built track-bar available in automobile market for 2nd Genration Dodge Ram. This bar easily goes with every form of truck. However, there is too an exception and it is that only Mag Hytec Differential covers cannot go with this piece unless it has 5 lift or more than that. Otherwise, be it 1994 to 2001 Ram 1500 4x4 or 1994 to 2002 Ram 2500/3500 4x4 trucks, Source Automotives special track bars for trucks fit in all. Till today, you, undoubtedly, have come across thousands types of track bars in the market but none of them was as satisfactory as you wanted them to be. Believe it or not, track bars for trucks provided by Source Automotive have already captivated the interests of all potential clients based globally. No matter, what height your 2nd generation Ram 4x4s suspension goes up to, you can always get the best out of this bar. Their mechanical engineers use a latest track bar grade what traces your track bar casing mount forwarded from the stock point to let the frontage-axle be driven ahead more than any other bar. This piece of track bar is manufactured in tailored length for those trucks what are picked up tremendously high (e.g., more than 8 suspension), therefore, they request their potential clients, i.e. you to send email address respectively to let them make out how long your track bars have to be via healthy conversations. The usual size-criterions are stock to 4 lift, 3 lift or even to 8 lift. If the suspension lift goes above 8 then, it will be made in custom for your vehicle. Their track bar kit comprises of all the Grade 8 hardware and proper guidance on the installation of kit as well.Business DetailsSource Automotive16805 SE 130th Ave. Clackamas, Oregon 97015Sales Office: 503-654-9004Toll-Free: 1-866-211-1533Fax Line: 503-786-7882desk@sourceautomotive.bizhttp://sourceautomotive.biz/