SoundOff Signal Catalog

Lightbars

Directional Warning

Perimeter Lighting

Sirens and Speakers

Electronics

Interior Lighting

Beacons

Work Area Lighting

Emergency VehicleProducts Catalog

SMARTLY DESIGNED

LIGHTING AND

ELECTRONIC SOLUTIONS.

SUPERIOR CUSTOMER

RELATIONSHIPS.

www.soundoffsignal.com1.800.338.7337

Lightbars 4

Directional Warning 22

Perimeter Lighting 30

Sirens and Speakers 70

Electronics 78

Interior Lighting 92

Beacons 96

Work Area Lighting 102

Located inHudsonville, Michigan

For over 20 years,

SoundOff Signal® has

provided innovative

vehicle safety solutions

for the markets we serve.

Our rich history

commitment to

our customers, and

problem-solving design

have resulted in an

organization that delivers

products and services

you can trust.

2

LIG

HTB

ARS

Lightbars are custom ordered to your specifications. Visit www.soundoffsignal.com for an order form.

Exterior Full Size LED ● nForcE® 5

● Apex 7

● Pinnacle 9

● MAgnuM 11

● Skyfire 13

Interior rear Deck ● nForcE® 15

● Pinnacle 17

Interior Windshield ● nForcE® 16

● Pinnacle 18

Mini ● Pinnacle 19 EPL7000 19

EPL7200 20

● LED3 21

2

3

EXTERIOR LIG

HTBA

RS

Exterior Full Size LED Lightbar

Features

#ENFLB

THINKnew

FORCENEXUS TECHNOLOGY

R

• Modules can be configured as single, dual or tri-color for maximum functionality

• Inboard modules are available in single color 6 or 9 LEDs, dual color 12 LEDs or tri-color 18 LEDs

• Corner modules are offered in single color 12 or 18 LEDs, dual color 24 LEDs or tri-color 30 LEDs

• Lightbars with multi-color modules (dual or tri-color) that include white LED’s are capable of providing a full 360 degrees of intense scene lighting

• Discrete rear-arrow control modules can be combined with warning colors for maximum functionality

• Dedicated 6 LED takedowns and 3 LED alley lights are standard

• Takedown modules can be designated anywhere on the light bar

• Windows based PC application simplifies programming and enhances configurability and control

• Use of PC application in conjunction with SoundOff Signal sirens simplifies install with “plug and play” RJ45 capability; save configuration time and enhance configurability by directly mapping siren buttons to lightbar functions

• Other user configurable options include: cruise mode, front/rear/corner cutoff inputs, nighttime manual dimming, 32 programmable flash patterns, steady burn and stop/tail/turn

U.S. and Foreign Patent Pending

4

EXTE

RIO

R LI

GH

TBA

RS

TECHNICAL SPECIFICATIONS INPUT VOLTAGE RANGE 10-16 Vdc NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 1.0 Amp CURRENT DRAW @ 12.8 Vdc 9 LED Single Color: < 1.5 Amp 12 LED Dual Color: < 1.0 Amp 18 LED Tri-Color: < 1.0 Amp Corner Module: 12 LED Single Color: < 2.0 Amp 18 LED Single Color: < 3.0 Amp 24 LED Dual Color: < 2.0 Amp 30 LED Tri Color: < 2.0 Amp Takedown: 6 LED Single Color: < 1.0 Amp Alley: 3 LED SIngle Color: < 0.5 Amp NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 6.4 Watt WATTAGE @ 12.8 Vdc 9 LED Single Color: < 9.6 Watt 12 LED Dual Color: < 6.4 Watt 18 LED Tri-Color: < 6.4 Watt Corner Module: 12 LED Single Color: < 12.8 Watt 18 LED Single Color: < 19.2 Watt 24 LED Dual Color: < 12.8 Watt 30 LED Tri Color: < 12.8 Watt Takedown: 6 LED: < 12.8 Watt Alley: 3 LED: < 6.4 Watt FLASh PATTERNS Warning: 32, Takedown/Alley: 15 and Arrow L/C/R: 6 OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS: Length 2 Module: 24” (61 cm) 4 Module: 36” (91 cm) 5 Module: 42” (107 cm) 6 Module: 48” (122 cm) 7 Module: 54” (137 cm) 8 Module: 60” (152 cm) 10 Module: 72” (183 cm) height All Modules: 2.55” (6.5 cm) (lightbar only) Depth All Modules: 12” (31 cm) MOUNTS Standard hook Bracket mount with angle adjustment wedges, headache Rack mount, Permanent mount and Magnetic mount (24” version only) CERTIFICATIONS SAE J845, J595 Class 1 certified and California Title 13, Class B WARRANTy Five-year

For other nFORCE products, refer to the Interior Rear Deck Lightbar, page 15; Interior Windshield Lightbar, page 16; Traffic Controller page 23; Surface Mounts, page 35; Deck/Grille Mounts, page 49;

Recess Mount, page 56 and the Windshield Mounts on page 59.

5

EXTERIOR LIG

HTBA

RS


Fuel Saving DesignExclusive, aerodynamic shape is designed to reduce fuel consumption. Wing shape glides through the air.

Features

#EPX3ØØØ

• Streamlined design with unique “wing” shape that was wind tunnel tested and showed the lowest drag with no added lift force to the car with additional benefits of fuel savings and better vehicle handling

• Our thinnest lightbar with a slim inboard module of just 1.6” (4.064 cm) tall, optimized optic height for maximum photometric impact

• 180˚scenelightoptionusesalleylightsandstrategicallyplacedwideangletakedownlights(refertodiagramon following page)

• New inboard optic features striations on the lenses to bend the light for extreme off angle visibility

• New alley light design is positioned at just the right angle for advanced side viewing while operating the vehicle

• Clear or color lenses in amber, blue or red

• Dimming capability

6

EXTE

RIO

R LI

GH

TBA

RS

Take Down(Scene Light Option)


Alley Light40º

Alley Light40º

180º Scene Light

100º of Take Downs

Front of Vehicle



Alley Light40º

Alley Light40º

180º Scene Light

100º of Take Downs

TECHNICAL SPECIFICATIONS INPUT VOLTAGE RANGE 10-16 Vdc NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 1.0 Amp CURRENT DRAW @ 12.8 Vdc 6 LED Dual Color: < 1.0 Amp Corner Module: 12 LED Single Color: < 2.0 Amp Takedown: 6 LED Single Color: < 1.0 Amp Alley: 4 LED Single Color: < 0.5 Amp NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 6.4 Watt WATTAGE @ 12.8 Vdc 6 LED Dual Color: < 6.4 Watt Corner Module: 12 LED Single Color: < 12.8 Watt Takedown: 6 LED: < 12.8 Watt Alley: 4 LED: < 6.4 Watt FLASh PATTERNS Warning: 21, Takedown/Work Lights: 5, Alley: 5, Arrow L/C/R: 4 and Arrow Warning: Solid 9/Split 17 OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS: Length 4 Module: 36” (91 cm) 5 Module: 43” (109 cm) 6 Module: 50” (122 cm) 7 Module: 56.5” (145 cm) 8 Module: 63” (160 cm) 9 Module: 70” (178 cm) 10 Module: 76” ( 193 cm) height All Modules: Inboard: 1.6” (4.064 cm) and Corner: 2” (5.08 cm) Depth All Modules: 11.25” (29 cm) MOUNTS headache Bracket or Low Profile Fixed Bracket OPTION Rear Split Arrow: Every other diode flashes in each rear arrow inboard module along length of bar CERTIFICATIONS SAE J845, and J595 Class 1 certified; Article 22, CA Title 13 compliant; ECE R65 Category T: Class 1 certified (for amber, blue and red) and 72/245/EEC EMC certified WARRANTy Five-year

7

EXTERIOR LIG

HTBA

RS


#EPL9ØØØ

Features• Innovative optics design, “Fusion Technology”, the first optics designed like a lighthouse to boost the light farther and wider for a brighter, safer warning signal

• Fusion Boost option

• Streamlined, modular design is easy to maintain with field replaceable modules that are easily upgradable

• 6 or 12 LED dual color arrow option available

• Clear or color lenses in amber, blue or red


8

EXT

ERIO

R LI

GH

TBA

RS

TECHNICAL SPECIFICATIONS INPUT VOLTAGE RANGE 10-16 Vdc NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 1.0 Amp CURRENT DRAW @ 12.8 Vdc 12 LED Dual Color: < 1.0 Amp Corner Module: 12 LED Single Color: < 2.0 Amp Takedown: 6 LED: < 1.0 Amp Alley: 1 LED: < 0.5 Amp NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 6.4 Watt WATTAGE @ 12.8 Vdc 12 LED Dual Color: < 6.4 Watt Corner Module: 12 LED Single Color: < 12.8 Watt Takedown: 6 LED: < 12.8 Watt Alley: 1 LED: < 6.4 Watt FLASh PATTERNS Warning: 21, Takedown: 5, Alley: 5, Arrow L/C/R: 4 and Arrow Warning: Solid 9, Split 17 OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS: Length 4 Module: 36” (91 cm) 5 Module: 42” (107 cm) 6 Module: 48” (122 cm) 7 Module: 54” (137 cm) 8 Module: 60” (152 cm) 9 Module: 72” (183 cm) height All Modules: Inboard: 1.75” (4.45 cm) and Corner: 2.5” (6.35 cm) Depth All Modules: 10” (25 cm) MOUNTS Adjustable, headache or Low Profile Fixed Bracket CERTIFICATIONS SAE J845, J595 Class 1 certified and Article 22, CA Title 13 WARRANTy Five-year

For other Pinnacle products, refer to the Interior Rear Deck Lightbar, page 17; Interior Windshield Lightbar, page 18; Mini Lightbar EPL7ØØØ, page 19 and the Mini Lightbar EPL72ØØ, page 20.


9

EXTERIOR LIG

HTBA

RS


#EMG2ØØØ

Features• Available in red, blue and amber lenses

• 6 LED inboard modules deliver Fusion Boost technology for extreme brightness

• 3 LED inboard modules designed with a new TurboOptic to deliver maximum intensity at an affordable price

• 6 or 12 LED corner modules

• Low profile design

• Cruise mode option

• Optimal rear stop/turn modules available

• Replaceable outer Lens


THINKnew

Red, blue and amber colored lenses are now available for the Magnum exterior lightbar. A color lens (vs. a clear lens) can provide additional purpose identification for emergency vehicles.

Note that only red and blue corner lenses provide clear windows (non-colored) to effectively project white alley lighting. White takedown modules cannot be configured inside colored lenses.

Exterior Full Size LED Lightbar With Speaker

Coming Soon!

Contact your sales representative for additional information on this product.

10

INPUT VOLTAGE RANGE 10-16 Vdc NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 3 LED Single Color: < 0.5 Amp CURRENT DRAW @ 12.8 Vdc 6 LED Single Color: < 1.0 Amp 12 LED Dual Color: < 1.0 Amp Corner Module: 6 LED Single Color: < 1.0 Amp 12 LED Dual Color: < 1.6 Amp Takedown: 3 LED: < 0.42 Amp 6 LED: < 0.84 Amp 9 LED: < 1.26 Amp Alley: 3 LED: < 0.42 Amp NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 3 LED Single Color: < 3.2 Watt WATTAGE @ 12.8 Vdc 6 LED Single Color: < 6.4 Watt 12 LED Dual Color: < 6.4 Watt Corner Module: 6 LED Single Color: < 6.4 Watt 12 LED Single Color: < 10.2 Watt Takedown: 3 LED: < 2.7 Watt 6 LED: < 5.4 Watt 9 LED: < 8.1 Watt Alley: 3 LED: < 2.7 Watt FLASh PATTERNS Warning: 21, Takedown: 5, Alley: 5, Arrow L/C/R: 4 and Arrow Warning: Solid 9, Split 17 OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS: Length 2 Module: 23” (58.4 cm) 4 Module: 35.5” (90.2cm) 5 Module: 42” (106 cm) 6 Module: 48” (12.9 cm) 7 Module: 54” (137 cm) 8 Module: 60.5" (153.7 cm) 10 Module: 73” (185.4 cm) height All Modules: 2.3” (5.8 cm) Depth All Modules: 12.3” (31.2 cm) MOUNTS headache or Low Profile Fixed Bracket OPTIONS Rear Split Arrow: Available with 6 or 12 LED Dual Color Modules CERTIFICATIONS SAE J845 and J595 Class 1 certified; Article 22, CA Title 13 compliant; ECE R65 Category T, Class 1 certified (for amber, blue and red) and 72/245/EEC EMC certified

WARRANTy Five-year

TECHNICAL SPECIFICATIONS

EXTE

RIO

R LI

GH

TBA

RS

11

EXTERIOR LIG

HTBA

RS

#ESF1ØØØ

Features• Strategically positioned 40° module placement on the end caps provide an optimum level of off angle performance - critically important at dangerous intersections

• Uninterrupted signal across the entire length - Work Light and Take Down modules are mounted below the warning modules for a full signal

• Work Light optics angled down 8° to clearly illuminate the rear work area or last 8 feet of a tow truck bed for better visibility for those working night shifts or during inclement weather

• Field configurable - outer dome is easy to remove and modules can be quickly changed out if needed

• Aluminum bottom extrusion

60” Full Size LED Tow Bar#ESF1K60AWLSTC (pre-configured part number)

= Inboard Modules = Work Lights = Rear STT Modules

LED Lightbar

tm


12

EXTE

RIO

R LI

GH

TBA

RS

INPUT VOLTAGE RANGE 10-16 Vdc NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 1.0 Amp CURRENT DRAW @ 12.8 Vdc Corner Module: 12 LED: < 2.0 Amp Takedown: 6 LED: < 1.0 Amp NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 6.4 Watt WATTAGE @ 12.8 Vdc Corner Module: 6 LED Single Color: < 6.4 Watt Takedown: 6 LED: < 6.4 Watt Alley: None FLASh PATTERNS Warning: 27, Takedown/Worklights: Steady Burn OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS: Length 48” (12.9 cm) 55” (140 cm) 60” (152 cm) height All lengths: 3” (7.62 cm) Depth All lengths: 11.25” (28.6 cm) MOUNTS headache, Low Profile Fixed Bracket or Flat Mount hardware CERTIFICATIONS SAE J845 Class 1 and J575 Class 1 certified WARRANTy Five-year


13

INTERIO

R LIGH

TBARS

#EPL8ØØØRD

Interior Rear Deck Lightbar

• Built with our exclusive “Fusion Technology” optics to disperse an even distribution of light with a super wide angle output

• Low profile Rear Deck model is a sleek shrouded compact design that installs neatly into the rear deck for powerful rear warning signal

• Lower profile than competing lightbars with less overall obstruction and smaller footprint

• Compatible with many vehicle makes and models including Chevrolet Caprice, Impala, Dodge Charger and Ford Crown Victoria

• Custom ordered for your vehicle in Amber, Blue, Green or Red LEDs

Features

INPUT VOLTAGE RANGE 10-16 Vdc NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 1.0 Amp CURRENT DRAW @ 12.8 Vdc Work Light: 9 LED Single Color: < 1.0 Amp NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 6.4 Watt WATTAGE @ 12.8 Vdc Work Light: 6 LED: < 6.4 Watt

FLASh PATTERNS 4 directional for left, center out and right; 14 warning end patterns; 10 directional warning patterns or 6 or 8 rear arrow lengths available, 6 module length can accommodate single warning end modules

OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS 6 Module: 29" (11 cm) L x 1" (2.5 cm) h x 6.5" (2.6 cm) D 8 Module: 38.25" (15 cm) L x 1" (2.5 cm) h x 6.5" (2.6 cm) D MOUNT Rear Deck mount WARRANTy Five-year


For other Pinnacle products, refer to the Exterior Lightbar, page 9; Interior Windshield Lightbar, page 18; Mini Lightbar EPL7ØØØ, page 19 and the Mini Lightbar EPL72ØØ, page 20.

14

INTE

RIO

R LI

GH

TBA

RS

Interior Windshield Lightbar

#EPL8ØØØWS

• Built with our exclusive “Fusion Technology” optics to disperse an even distribution of light with a super wide angle output

• Lower profile than competing lightbars with less overall windshield obstruction and smaller footprint

• Many vehicle specific models for SUVs and trucks; Chevrolet Tahoe, Ford Expedition, and Explorer

• Universal model with adjustable mounting brackets accommodate most windshield angles for even greater compatibility with different vehicle models and years

• Compatible with many vehicle makes and models including Chevrolet Caprice, Impala, Dodge Charger and Ford Crown Victoria

• Up to 2 LED Take Down modules can be designated in your choice of position on the bar

Features

INPUT VOLTAGE RANGE 10-16 Vdc NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 1.0 Amp CURRENT DRAW @ 12.8 Vdc Takedown: 9 LED Single Color: < 1.0 Amp NUMBER OF LEDs AND MAXIMUM Inboard Warning Module: 6 LED Single Color: < 6.4 Watt WATTAGE @ 12.8 Vdc Takedown: 6 LED: < 6.4 Watt FLASh PATTERNS Standard Warning: 36 flash patterns and Takedown: 9 flash patterns OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS Universal (each side): 20” (51 cm) L x 1” (2.5 cm) h x 7.5” (19 cm) D MOUNT Universal Bracket model with adjustable mounting or vehicle specific WARRANTy Five-year


For other Pinnacle products, refer to the Exterior Lightbar, page 9; Interior Rear Deck Lightbar, page 17; Mini Lightbar EPL7ØØØ, page 19 and the Mini Lightbar EPL72ØØ, page 20.

15

MIN

I LIGH

TBARS

Mini Lightbar: EPL7ØØØ

Clear Domes Magnetic Mount with Cigar Plug #EPL7M+(x)C Standard Permanent Mount #EPL7PD(x)C #EPL7PF(x)C (25 foot cable) high height Permanent Mount #EPL7HD(x)C #EPL7HF(x)C (25 foot cable)

Amber Dome with Amber LEDs Magnetic Mount with Cigar Plug #EPL7M+AA Standard Permanent Mount #EPL7PDAA #EPL7PFAA (25 foot cable)

Features

#EPL7ØØØREPLACE (x) IN ORDER NUMBER

FOR COLOR SELECTION

Solid Colors =

Dual/Split Colors = A B G R W

A B D E F

G H J K L

M N P R WVisit our website for an order formfor custom product configuration

• Magnetic mount has Cig plug with 2-button switch panel (on, off and flash pattern advance) - Red LED indicator light and 10’ cord length - 4 extra strong magnets each with an 85 pound pull each to prevent the bar from slipping or moving

• Permanent mount with 12’ cable with bare wires for hard wire installation

• Fusion II Technology - optic for a bright, extra wide output

• Non-volatile memory - recalls last flash pattern used

INPUT VOLTAGE RANGE 10-16 Vdc CURRENT DRAW 2 amps average @ 12.8 Vdc LED COUNT 24 LEDs FLASh PATTERNS 28 flash patterns OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS 14.16” (36 cm) L x 8.27” (21 cm) W x 1.90” (4.8 cm) h MOUNTS Magnetic: 2.97” (7.5 cm) Overall height, 0.87” (2.2 cm) clearance Low Permanent: 2.28” (5.8 cm) Overall height 0.38” (1.0 cm) clearance high Permanent: 4.25” (10.8 cm) Overall height 2.35” (6.0 cm) clearance CERTIFICATIONS SAE J845 Class 1 certified (blue and red only) WARRANTy Five-year


For other Pinnacle family products, refer to the Exterior Lightbar, page 9; Interior Rear Deck Lightbar, page 17; Interior Windshield Lightbar, page 18 and the Mini Lightbar EPL72ØØ, page 20.

16

MIN

I LIG

HTB

ARS

Mini Lightbar: EPL72ØØ

#EPL72ØØ

Features

Clear Domes SAE Magnetic Mount with Cigar Plug #EPL7SAM+AC SAE Standard Permanent Mount #EPL7SAPDAC #EPL7SAPFAC (25 foot cable) SAE high height Permanent Mount #EPL7SAHDAC #EPL7SAHFAC (25 foot cable) SAE Magnetic Mount with Cigar Plug #EPL7SAM+AA SAE Standard Permanent Mount #EPL7SAPDAA #EPL7SAPFAA (25 foot cable) SAE high height Permanent Mount #EPL7SAHDAA #EPL7SAHFAA (25 foot cable)

Amber Dome with Amber LEDs ECE Magnetic Mount with Cigar Plug #EPL7ECM+(x)C ECE Standard Permanent Mount #EPL7ECPD(x)C ECE high height Permanent Mount #EPL7ECHD(x)C ECE Magnetic Mount with Cigar Plug #EPL7ECM+AA ECE Standard Permanent Mount #EPL7ECPDAA ECE high height Permanent Mount #EPL7ECHDAA

A B R

REPLACE (x) IN ORDER NUMBER

FOR COLOR SELECTION

Solid Colors =

• Magnetic mount has Cig plug with 2-button switch panel (on, off and flash pattern advance) - Red LED indicator light and 10’ cord length - 4 extra strong magnets each with an 85 lb. pull each to prevent the bar from slipping or moving

• Permanent mount with 12’ cable with bare wires for hard wire installation



INPUT VOLTAGE RANGE 10-30 Vdc CURRENT DRAW 2 Amps average @ 12.8 Vdc LED COUNT 20 LEDs FLASh PATTERNS 28 flash patterns OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS 14.16” (36 cm) L x 8.27” (21 cm) W x 1.90” (4.8 cm) h MOUNTS Magnetic: 2.97” (7.5 cm) Overall height, 0.87” (2.2 cm) clearance Standard Permanent: 2.28” (5.8 cm) Overall height 0.38” (1.0 cm) clearance high Permanent: 4.25” (10.8 cm) Overall height 2.35” (6.0 cm) clearance CERTIFICATIONS SAE J845 Class 1 certified and ECE R65 Category T, Class 1 certified (except for configured product) WARRANTy Five-year


REPLACE (x) IN ORDER NUMBER FOR COLOR SELECTION

Solid Colors =

A B G R W

Visit our website for an order formfor custom product configuration

For other Pinnacle family products, refer to the Exterior Lightbar, page 9; Interior Rear Deck Lightbar, page 17; Interior Windshield Lightbar, page 18 and the Mini Lightbar EPL7ØØØ, page 19.

17

MIN

I LIGH

TBARS

Features

10 - 16vMagnetic Mount #EL3MBM+(x)CPermanent Mount #EL3MBPD(x)C

• 10 powerful LED3 modules totaling 30 LEDs

• Magnetic mount includes 12 volt DC plug with 2-button switch panel for on, off and flash pattern advance with red LED indicator light and 10’ cord length

• Magnetic mount features 4 extra strong magnets - each with 85 lb. pull to prevent the bar from slipping or moving

• Permanent mount includes 12’ cable with bare wires for hard wire installation

• Non-volatile memory recalls last flash pattern used at power up

• Clear outer dome with solid or split LED colors

Mini Lightbar

10 - 30vMagnetic Mount #EL3MBM3Ø+(x)CPermanent Mount #EL3MBP3ØD(x)C

REPLACE (x) IN ORDER NUMBER FOR COLOR SELECTION

Solid Colors =

Dual/Split Colors = A B G R W

A B D E F

G H J K L

M N P R WVisit our website for an order formfor custom product configuration

INPUT VOLTAGE RANGE 10-16 or 10-30 Vdc CURRENT DRAW 2.5 amps @ 12.8 Vdc LED COUNT 30 LEDs FLASh PATTERNS 24 flash patterns OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS 14.16” (36 cm) L x 8.27” (21 cm) W x 1.90” (4.8 cm) h MOUNTS Magnetic: 2.97” (7.5 cm) Overall height, 0.87” (2.2 cm) clearance Permanent: 2.28” (5.8 cm) Overall height 0.38” (1.0 cm) clearance WARRANTy Five-year


22

DIR

ECTI

ON

AL

WA

RNIN

GD

IREC

TIO

NA

L W

ARN

ING

Traffic Controller ● nforCe® 23

exterior Bars ● UltraLITe 25

● TrafficMaster 29

Interior Bars ● UltraLITe 27

22

23

TRAFFIC

CO

NTRO

LLER

features


R

Traffic Controller

8 Module #ENFTCDGS1208

Coming Soon!

4 Module #ENFTCDGS1204

• Modules can be specified in any combination of single color 6 or 9 LED, dual color 12 LED or tri-color 18 LED counts

• White LED modules can be specified as take-down, work lights or flood lighting

• Designed for interior or exterior usage - Can be used in rear or front vehicle applications and can be mounted to a push bumper - Manual dimming capability for nighttime use

• Cruise mode

• Use of PC application in conjunction with SoundOff Signal® sirens simplifies install with “plug and play” RJ45 capability; save configuration time and enhance configurability by directly mapping siren buttons to lightbar functions

• Mounting brackets are included

U.S. and Foreign patents pending

24

TRA

FFIC

CO

NTR

OLL

ER

INPUT VOLTAGE RANGE 10-16 Vdc NUMbER OF LEDs AND MAXIMUM LED Module: 6 LED Single Color: < 1.0 Amp CURRENT DRAW @ 12.8 Vdc 9 LED Single Color: < 1.5 Amp 12 LED Dual Color: < 1.0 Amp 18 LED Tri-Color: < 1.0 Amp NUMbER OF LEDS AND MAXIMUM LED Module: 6 LED Single Color: < 6.4 Watt WATTAGE @ 12.8 Vdc 9 LED Single Color: < 9.6 Watt 12 LED Dual Color: < 6.4 Watt 18 LED Tri-Color: < 6.4 Watt Takedown: 6 LED: < 12.8 Watt FLASh PATTERNS Warning 34 and Arrow 8 OPERATING TEMPERATURE -40° C to +65° C / -40° F to + 149° F DIMENSIONS 4 Module: 19” (48.3 cm) L x 1.9” (4.7 cm) h x 2.47” (6.3 cm) D 8 Module: 35.5” (90 cm) L x 1.9” (4.7 cm) h x 2.47” (6.3 cm) D CERTIFICATION SAE J845 Class 1 certified WARRANTy Five-year

TeCHNICAL SPeCIfICATIoNS

For other nFORCE products, refer to the Exterior Lightbar, page 5; Interior Rear Deck Lightbar, page 15; Interior Windshield Lightbar, page 16; Surface Mounts, page 35; Deck/Grille Mounts, page 49;

Recess Mount, page 56 and the Windshield Mounts on page 59.

25

EXTERIOR D

IRECTIO

NA

L WA

RNIN

G BA

RS

Solid or Split Standard Bars2 Module #EL3DØ2AØØ(x)4 Module #EL3DØ4AØØ(x)8 Module #EL3DØ8AØØ(x)12 Module #EL3D12AØØ(x)

Single Warning ends (flash with arrow)

8 Module #EL3DØ8A1Ø(x)12 Module #EL3D12A1Ø(x)

Independent Warning ends (ends flash independently from arrow)

8 Module, Single Ends #EL3DØ8B1Ø(x) 12 Module, Single Ends #EL3D12B1Ø(x) 12 Module, Dual Ends #EL3D12B2Ø(x)

Dual Warning ends (flash with arrow)

12 Module #EL3D12A2Ø(x)

On 10-30 Vdc Part Numbers, add “-24” to the end of part number. Example: a 24 volt 4 module bar would be #EL3DØ4AØØJ-24

• Sealed for exterior weather-ability

• Custom color configurations offered for exterior 4, 8 or 12 module bars (visit www.soundoffsignal.com for an order form)

• Program up to 3 warning patterns on the 8 and 12 module dual/split color bars

• Compatible with our directional arrow switch

• Includes adjustable height universal “L”-brackets (pair) for dash/deck or headliner mounts

features

exterior Directional Warning Bars

A B G r W

A B D e f

G H J K L

M N P r W

rePLACe (x) IN orDer NUMBer for CoLor SeLeCTIoN

Solid Colors =

Dual Colors =

Interior and Exterior Color Choices

flash with Arrow 10-30 Vdc (with 50’ cable)

8 Module #EL3DØ8AØL(x)-248 Module #EL3DØ8A1L(x)-24 12 Module #EL3D12AØL(x)-2412 Module #EL3D12A1L(x)-2412 Module #EL3D12A2L(x)-24

26

EXTE

RIO

R D

IREC

TIO

NA

L W

ARN

ING

BA

RS

INPUT VOLTAGE RANGE 10-16 Vdc or 10-30 Vdc

CURRENT DRAW Less than 1 Amp per module

LED COUNT 2 Module: 6 LEDs 4 Module: 12 LEDs 8 Module: 24 LEDs 12 Module: 36 LEDs FLASh PATTERNS 12 to 20 flash patterns OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS 2 Module: 6.9” (18 cm) L x 1.5” (3.8 cm) h x 1.7” (4.3 cm) D 4 Module: 13.25” (34 cm) L x 1.5” (3.8 cm) h x 1.7” (4.3 cm) D 8 Module: 26” (66 cm) L x 1.5” (3.8 cm) h x 1.7” (4.3 cm) D 12 Module: 38.75” (98 cm) L x 1.5” (3.8 cm) h x 1.7” (4.3 cm) D

CERTIFICATIONS SAE J595 Class 1 certified and Article 22: CA Title 13 compliant

WARRANTy Five-year


For other UltraLITE products, refer to the Interior Directional Warning Bars on page 27 and the Interior Windshield Lights on page 63.

27

INTERIO

R DIREC

TION

AL W

ARN

ING

BARS

features

Solid or Split Standard Bars4 Module #EL3HØ4AØØ(x)8 Module #EL3HØ8AØØ(x)12 Module #EL3H12AØØ(x)

• Intense warning power provides a distinct safety advantage

• Each module has 3 very bright, high bin LEDs for better reliability and performance

• Slim, narrow design is perfect for headliner, dash/windshield and rear deck mounts in all types of vehicles

• Program up to 3 warning patterns on the 8 and 12 module dual/split color bars

• Compatible with our directional arrow switch

• Includes adjustable height universal “L”-brackets (pair) for dash/deck or headliner mounts

A B G r W

A B D e f

G H J K L

M N P r W

rePLACe (x) IN orDer NUMBer for CoLor SeLeCTIoN

Solid Colors =

Dual Colors =

Interior and Exterior Color Choices

Independent Warning ends (ends flash independently from arrow)

8 Module, Single #EL3HØ8B1Ø(x)12 Module, Single #EL3H12B1Ø(x)12 Module, Dual #EL3H12B2Ø(x)

Interior Directional Warning Bars

INPUT VOLTAGE RANGE 10-16 Vdc

CURRENT DRAW Less than 1 Amp per module

LED COUNT 4 Module: 12 LEDs

8 Module: 24 LEDs

12 Module: 36 LEDs FLASh PATTERNS 12 to 20 flash patterns OPERATING TEMPERATURE -40° C to +65° C / -40° F to +149° F DIMENSIONS 4 Module: 13.25” (34 cm) L x 1.5” (3.8 cm) h x 1.7” (4.3 cm) D 8 Module: 26” (66 cm) L x 1.5” (3.8 cm) h x 1.7” (4.3 cm) D 12 Module: 38.75” (98 cm) L x 1.5” (3.8 cm) h x 1.7” (4.3 cm) D

CERTIFICATIONS SAE J595 Class 1 certified and Article 22: CA Title 13 compliant

WARRANTy Five-year


For other UltraLITE products, refer to the Exterior Directional Warning Bars on page 25 and the Interior Windshield Lights on page 63.

The UltraLITE Windshield 4 module warning bar may be custom ordered.

Visit www.soundoffsignal.com for an order form.

Warning ends (flash with arrow)

8 Module, Single #EL3HØ8A1Ø(x)12 Module, Single #EL3H12A1Ø(x)12 Module, Dual #EL3H12A2Ø(x)

28

INTE

RIO

R D

IREC

TIO

NA

L W

ARN

ING

BA

RS

Universal Bracket, 1 hole#PUL3DGMØ1 (pair)



Windshield Shroud 2 Module - #PUL3WS24 Module - #PUL3WSS

(4 module length shown)

Visor Mount for Ford Crown Victoria #PUL3MØ1 (pair)

Visor Mount for Chevrolet Tahoe #PUL3MØ2 (pair)

Visor Mount for Chevrolet Impala #PUL3MØ3 (pair)

Visor Mount for Dodge Charger #PUL3MØ4 (single bracket)

Headliner Mount for Dodge Durango #PUL3MØ5 (pair)

Dash Mount for Dodge Charger #PUL3MØ6 (pair)

Rear Deck Mount for Dodge Charger#PUL3MØ7 (pair)

Center Mount for Ford Crown Victoria#PUL3MØ8 (pair)

Universal Bracket, 7 hole#PUL3DGM (pair)

UltraLITe Brackets, Mounts and Shroud options

29

EXTERIOR D

IRECTIO

NA

L WA

RNIN

G BA

RS INPUT VOLTAGE RANGE 10-30 Vdc

CURRENT DRAW 2.2 Amps max

LED COUNT 168 LEDs FLASh PATTERNS 2 warning patterns and 6 arrow patterns OPERATING TEMPERATURE -30° C to +65° C / -22° F to +149° F

DIMENSIONS Split Arrow: 21” (53 cm) L (each end) x 2.75” (7 cm) h x 1.75” (4.5 cm) D

Solid bar: 42” (107 cm) L x 2.75” (7 cm) h x 1.75” (4.5 cm) D

MOUNTING Surface mount (brackets included)

WARRANTy Five-year


#ETT3MLEDSA

features

TrafficMaster exterior LeD Directional Warning Bars

• Universal design fits interior rear windows in all types vehicles or can be mounted on the exterior

• 8 sealed weatherproof modules

• Reliable self-contained solid state design

• Includes control box and mounting brackets

• Control box features illuminated display to show flash pattern selected and 5-position rotary switch to control all primary functions

• hard wire installation with 25’ cable

#ETT3MLED-P

30

PERI

MET

ER L

IGH

TIN

G

Deck/Grille Mounts ● nforce® 49

Single 49 Dual Side-by-Side 49

● GhoSt® 51 .. Single 51 Dual 51 Single Stop/tail 51 rock 52

● Predator® II 53 Single 53 Dual Side-by-Side 53

● XP 63 54

Warning trunk Light ● LeD3 55

recess Mounts ● nforce® 56 ● GhoSt® 57 Stop tail 57

● r4 Series Warning 58

Under Mirror ● Intersector 31

Surface Mounts ● Intersector 33

● nforce® 35 . Single 35 Dual Stacked 35

● GhoSt® 37

Single 37 Dual Stacked 37 Single Stop/tail 37

● Predator® II 39 Single 39 Dual Stacked 39 Dual Side-by-Side 39 Dual Stacked Stop/tail 39

● LeD3 Mini 41

● raptor 43

● fusion Lite 44

● compass fender 45 . chevrolet caprice 45 ford Interceptor Sedan 46

● nLINe running 47

Windshield Mounts ● nforce® 59 Single 59 Dual Side-by-Side 61

● UltraLIte 63

● Predator® II 65 Single 65 Dual Side-by-Side 65

LeD Visor Light ● Premium LeD 66

LeD Inserts and Bezels● Universal Undercover® 67 Screw-In Insert 67 Push-In Insert 67 twist-In Insert 67 Bezel with Insert 67

Strobe Power Supplies

● Nebula Strobe 69

● Galileo Strobe 69

● Photon Strobe 69

30

31

uN

dER M

IRRoR

Under Mirror Light

• The first light of its kind to offer critical intersection warning and side warning

• Design of light is based upon problem solving research - 30% of all emergency vehicle crashes are likely to occur at dangerous intersections

• No other light offers 180 degree output - specially designed reflector amplifies and throws the light at the perfect angle to increase visibility at intersections and offer side warning illumination

• Unique under mirror mount simplifies installation - labor saving light is much easier to install than traditional front mirror skull mounts - no mirrors to work behind or around

• Light can be surface mounted to any flat area on any type of vehicle - elevate your safety and visibility by mounting to the heachache rack or body of the vehicle wherever additional lighting is needed

• Features cruise mode for steady burn if desired

features

Under Mirror Light Kit Standard Configuration #ENT2B3(x)

Xylex Lens #ENT2B3(x)-EU

~ U.S. Patent #D636,113 (on light only)~Other Patents Pending

Light only works on flat surfaces

Replace (x) in Order Number for Color SelectionSolid colors =

A B G r W

Light includes in-line flasher, three wedges (0°, 5° and 10°)

and foam gasket.

32

uN

dER

MIR

RoR

techNIcAL SPecIfIcAtIoNS

FLaSh PaTTerNS 30 flash patterns

INPUT VOLTage 10-16 Vdc

CUrreNT Draw Less than 1.5 amps

LIghT SYNC Yes

LeD COUNT 3 LeDs

OPeraTINg TemPeraTUre -40˚ C to +65° C / -40˚ F to +149° F

DImeNSIONS 2.9” (7.4 cm) W x 1.9” (4.8 cm) H x 2.9” (7.4 cm) D

mOUNTINg Under mirror or Surface mount

CerTIFICaTIONS Sae J845 Class 1 certified and eCe reg. 10

warraNTY Five-year

For other Intersector products, refer to the Surface Mount on page 33.

curved Surface Adaptors (sold in pairs)

Curved Surface adaptors, Universal #PNT1CRV01 2011+ Curved Surface Adaptor, Chevy Caprice #PNT1CRV02 2011+ Curved Surface Adaptor, Dodge Charger #PNT1CRV03 2013+ Curved Surface Adaptor, Ford Sedan #PNT1CRV04 2013+ Curved Surface Adaptor, Ford Explorer PI #PNT1CRV05 2013+ Curved Surface Adaptor, Dodge Durango #PNT1CRV06 Special Service Vehicle

accessories

all accessories do not include light

Installation Bracket (optional) #PNT1WRRT(includes brackets and screws)

33

SuRFA

CE M

ou

NTS

Surface Mount Black housing #ENT3B3(x) Chrome housing #ENT3C3(x) white housing #ENT3W3(x)

• No other light offers 180 degree output - specially designed reflector amplifies and throws the light at the perfect angle to increase visibility at intersections

• Includes Surface mount Light in your choice of LeD and housing colors, neoprene gasket and mounting hardware for installation

• Patented design, the first light of its kind to offer critical intersection warning and side warning illumination now available with surface mount capabilities

features

~ u.S. Patent #d636,113 (on light only)~other Patents Pending

Surface Mount


A B G r W

34

Deck/Grille Mount Bracket (optional) #PNT3DGBB

Chevrolet Tahoe and Ford Utility rear Spoiler Bracket #PNT3DGBB-TH

accessoriesIntersector Surface Mount Brackets (lights sold separately)

SuRF

AC

E M

ou

NTS




CUrreNT Draw Less than 1.5 amps

LIghT SYNC Yes

LeD COUNT 3 LeDs

OPeraTINg TemPeraTUre -40˚ C to +65° C / -40˚ F to +149° F

DImeNSIONS 3.7” (9.4 cm) W x 1.7” (4.3 cm) H x 1.8” (4.6 cm) D

mOUNTINg Surface or Under mirror mount

CerTIFICaTIONS Sae J845 Class 1 certified and eCe reg. 10

warraNTY Five-year

For other Intersector products, refer to the Under Mirror Light on page 31.

THINKnew

35

SuRFA

CE M

ou

NTS

features

Surface MountsFORCENEXUS TECHNOLOGY

R

• New vehicle design integration

• Single, Split, Dual and Tri-Color capability

• 6, 9, 12 and 18 LED counts

• Steady-burn white capability

• Separate color control capability

• Secondary function can be either flashing or steady-burn

THINKnew

THINKnew


Single Surface Mount Dual Stacked Surface Mount 6 LeD Solid or Split Color #ENFSSS1(x) 6 LeD Solid or Split Color #ENFDSS1(xx)

9 LED Solid Color #ENFSSS2(x) 9 LED Solid Color #ENFDSS2(xx)

12 LeD Solid or Dual Color #ENFSSS3(x) 12 LeD Solid or Dual Color #ENFDSS3(xx)

18 LED Tri Color - Blue/Red/Amber #ENFSSS4BRA 18 LED Tri Color - Blue/Red/Amber #ENFDSS4BRA

18 LED Tri Color - Blue/Red/White #ENFSSS4BRW 18 LED Tri Color - Blue/Red/White #ENFDSS4BRW

High Output High Output

9 LED Solid Color - amber #ENFSSS2A-PC 9 LED Solid Color - Amber/Amber ENFSSS2AA-PC

Xylex Lens and ECE R65 Xylex Lens and ECE R65 9 LED Solid Color - Amber/Blue/Red/White #ENFSSE2(x) 9 LED Solid Color - Amber/Amber, #ENFDSE2(xx) Blue/Amber, Blue/Blue and Red/Red

STANDARD COLORS AVAILABLE

for Module LeD color Patterns, refer to chart on the following page.

replace the (x) or (xx) in part number for color selection.

Single Solid Colors (x) = A = amber, B = blue, R = red and W = white Single Light, 6 LED Split Colors (x) = J = red/blue Single Light, 12 LED Dual Colors (x) = J = red/blue Dual Light, Solid Colors (xx) =

AA = amber/amber, AW = amber/white, BA = blue/amber, BB = blue/blue, BW = blue/white, RA = red/amber, RB = red/blue, RR = red/red and RW = red/white Dual Light, 6 LED Split Colors (xx) = JJ = red/blue Dual Light, 12 LED Dual Colors (xx) = JJ = red/blue Tri Colors = BRA = blue/red/amber and BRW = blue/red/white (18 LED only) 9 LED available only in Solid Colors (x) = A = amber, B = blue, R = red and W = white

36

SuRF

AC

E M

ou

NTS

6 LeD Solid: Split:

9 LeD Solid:

12 LeD Solid: Dual:

18 LeD tri-color:

Module LeD color Patterns


FLaSh PaTTerNS 12 Single color patterns, 12 Dual or 12 Tri-color patterns

INPUT VOLTage 10-16 Vdc standard or 10-30 Vdc custom order

CUrreNT Draw Per mODULe 10-16 VDC 10-30 VDC (custom order)

6 LeD Single Color < 1.0 amp @ 12.8Vdc < 0.6 amp @ 25.6Vdc 6 LeD Split Color < 1.0 amp @ 12.8Vdc < 0.6 amp @ 25.6Vdc 9 LED Single Color < 1.5 Amp @ 12.8Vdc < 0.9 Amp @ 25.6Vdc 12 LeD Single Color < 2.0 amp @ 12.8Vdc < 1.2 amp @ 25.6Vdc 12 LeD Split Color < 1.0 amp @ 12.8Vdc < 0.6 amp @ 25.6Vdc 18 LeD Tri-Color < 1.0 amp @ 12.8Vdc < 0.6 amp @ 25.6Vdc

OPeraTINg TemPeraTUre -40˚ C to +65° C / -40° F to +149° F

DImeNSIONS Single: 5.0” (12.7 cm) L x 1.72” (4.3 cm) H x 1.50” (3.8 cm) D Dual Stacked: 5.0” (12.7 cm) L x 3.13” (7.9 cm) H x 1.50” (3.8 cm) D CerTIFICaTIONS SAE J595, Class 1 certified; CA Title 13, Article 22 compliant; EMC 72/245/EEC certified; and ECE R65, Category X, Class 2 certified (ECE R65 can only be specified with 9 LED solid color)

warraNTY Five-year

accessoriesSingle Surface Mount Brackets

45˚ angle bracket #PNFSLBRK145

horizontal License plate bracket PNFSLBRK2LPH

90˚ angle bracket #PNFSLBRK190

For other nFORCE products, refer to the Exterior Lightbar, page 5; Interior Rear Deck Lightbar, page 15; Interior Windshield Lightbar, page 16; Traffic Controller page 23; Deck/Grille Mounts, page 49, Recess Mount,

page 56 and the Windshield Mounts, page 59.

3900 Central Parkway | Hudsonville, MI 49426Telephone: 800.338.7337 | Order fax: 616.896.1286www.soundoffsignal.com

Single Surface Mount License Plate Bracket

THINK new

nFORCE® Single Surface Mount Light SpecificationsFlash Patterns 12 Single color patterns, 24 Dual and Tri-color patterns

lIGht sYnC YesteChnOlOGY 6 Gen3 leDsInPUt VOltaGe 10-16 Vdc and 10-30 Vdc (custom order)CUrrent DraW Per MODUle 10-16 Vdc

6 leD single Color < 1.0a @ 12.8Vdc 6 leD split Color < 1.0a @ 12.8Vdc 9 leD single Color < 1.5a @ 12.8Vdc 12 leD single Color < 2.0a @ 12.8Vdc 12 leD split Color < 1.0a @ 12.8Vdc 18 leD tri-Color < 1.0a @ 12.8Vdc

10-30 Vdc (custom order)6 leD single Color < 0.6a @ 25.6Vdc 6 leD split Color < 0.6a @ 25.6Vdc 9 leD single Color < 0.9a @ 25.6Vdc 12 leD single Color < 1.2a @ 25.6Vdc 12 leD split Color < 0.6a @ 25.6Vdc 18 leD tri-Color < 0.6a @ 25.6Vdc

OPeratInG teMPeratUre -40˚C to +65°C / -40° to +149°F lenGth/DIMensIOn 5.0” (12.7 cm) L x 1.88” (4.8 cm) H x 1.82” (4.6 cm) D (light only)

24” (60.96) l x 2” (5.1) h (license plate bracket)MOUntInG surface Mount

WarrantY Five-year (light only)

August 2013

13_08_0_nforce_single_license_bracket_nr

Horizontal license plate bracket

that accepts single surface mount

nFORCE® lights.

Adapts to:Ford Taurus Sedan Front

Ford SUV Utility Front and Rear

Dodge Charger Front

Chevy Tahoe Utility Rear

Certifications


R


• Single, Split, Dual and Tri-Color

capability



For Module LED Color Patterns and

for Standard Color Selections

(replacing the (x) in the part number)

visit www.soundoffsignal.com, select

resources, catalogs, emergency

catalog, then perimeter lighting.

~Patent Pending on nFORCE® Single Surface Mount Light~

nFORCE® is the only Perimeter

Lighting product line on the market

that can be specifically tailored to

your unique requirements.

Features

Single Surface Mount Light• 6 LED, Solid or Split Color #ENFSSS1(x)

• 9 LED, Solid Color #ENFSSS2(x)

• 12 LED, Solid or Dual Color #ENFSSS3(x)

• 18 LED, Tri Color - Blue/Red/Amber #ENFSSS4BRA

• 18 LED, Tri Color - Blue/Red/White #ENFSSS4BRW

nFORCE® Single Surface Mount Bracket (lights sold separately) #PNFSLBRK2LPH

• SAE: J595, Class 1 Certified

• CA Title 13: Article 22 Compliant

Custom Orders• EMC Tested and Certified, 72/245/EEC

• ECE Certified (ECE R65 can only be specified with 9 LED solid color) For custom orders, visit www.soundoffsignal.com, select products, perimeter lighting then nFORCE® surface mount for an order form.

#PNFSLBRK2LPH

Wire Hole

#PNFSLBRK2LPV

THINK newAugust 2013

Single Surface MountLicense Plate Bracket

Single Surface Mount • 6 LED, Solid or Split Color ENFSSS1(x)

• 9 LED, Solid Color ENFSSS2(x)

• 12 LED, Solid or Dual Color ENFSSS3(x)

• 18 LED, Tri Color - Blue/Red/Amber ENFSSS4BRA

• 18 LED, Tri Color - Blue/Red/White ENFSSS4BRW

For module LED color patterns and for standard color slections (replacing the “x” in the part number) visit www.soundoffsignal.com, select resources, catalogs, emergency catalog then perimeter lighting.

TECHNICAL SPECIFICATIONS: nFORCE Single Surface Mount

FLASH PATTERNS 12 Single color patterns, 24 Dual and Tri-color patterns

INPUT VOLTAGE 10 - 16 Vdc standard or 10 - 30 Vdc customer order

CURRENT DRAW PER MODULE 10-16 VDC 10-30 VDC (customer order)

6 LED Single Color < 1.0A @ 12.8Vdc < 0.6A @ 25.6Vdc

6 LED Split Color < 0.5A @ 12.8Vdc < 0.6A @ 25.6Vdc



12 LED Split Color < 1.0A @ 12.8Vdc < 0.6A @ 25.6Vdc

18 LED Tri-Color < 1.0A @ 12.8Vdc < 0.6A @ 25.6Vdc

TECHNOLOGY Gen3 LEDs

OPERATING TEMPERATURE -40˚C to +65°C / -40°F to +149°F

DIMENSIONS (single) 5.0” (12.7 cm) L x 1.72” (4.3 cm) H x 1.50” (3.8 cm) D (dual) 5.0” (12.7 cm) L x 3.13” (7.9 cm) H x 1.50” (3.8 cm) D

WARRANTY Five-year (light only)


13_08_nforce_single_license_bracket_nr


Single Surface Mount License Plate Bracket

THINK new

nFORCE® Single Surface Mount Light SpecificationsFlash Patterns 12 Single color patterns, 24 Dual and Tri-color patterns

lIGht sYnC YesteChnOlOGY 6 Gen3 leDsInPUt VOltaGe 10-16 Vdc and 10-30 Vdc (custom order)CUrrent DraW Per MODUle 10-16 Vdc

6 leD single Color < 1.0a @ 12.8Vdc 6 leD split Color < 1.0a @ 12.8Vdc 9 leD single Color < 1.5a @ 12.8Vdc 12 leD single Color < 2.0a @ 12.8Vdc 12 leD split Color < 1.0a @ 12.8Vdc 18 leD tri-Color < 1.0a @ 12.8Vdc

10-30 Vdc (custom order)6 leD single Color < 0.6a @ 25.6Vdc 6 leD split Color < 0.6a @ 25.6Vdc 9 leD single Color < 0.9a @ 25.6Vdc 12 leD single Color < 1.2a @ 25.6Vdc 12 leD split Color < 0.6a @ 25.6Vdc 18 leD tri-Color < 0.6a @ 25.6Vdc

OPeratInG teMPeratUre -40˚C to +65°C / -40° to +149°F lenGth/DIMensIOn 5.0” (12.7 cm) L x 1.88” (4.8 cm) H x 1.82” (4.6 cm) D (light only)

24” (60.96) l x 2” (5.1) h (license plate bracket)MOUntInG surface Mount

WarrantY Five-year (light only)

August 2013

13_08_0_nforce_single_license_bracket_nr

Horizontal license plate bracket

that accepts single surface mount

nFORCE® lights.



Dodge Charger Front


Certifications


R


• Single, Split, Dual and Tri-Color

capability



For Module LED Color Patterns and

for Standard Color Selections

(replacing the (x) in the part number)

visit www.soundoffsignal.com, select

resources, catalogs, emergency

catalog, then perimeter lighting.

~Patent Pending on nFORCE® Single Surface Mount Light~

nFORCE® is the only Perimeter

Lighting product line on the market

that can be specifically tailored to

your unique requirements.

Features

Single Surface Mount Light• 6 LED, Solid or Split Color #ENFSSS1(x)

• 9 LED, Solid Color #ENFSSS2(x)

• 12 LED, Solid or Dual Color #ENFSSS3(x)

• 18 LED, Tri Color - Blue/Red/Amber #ENFSSS4BRA

• 18 LED, Tri Color - Blue/Red/White #ENFSSS4BRW

nFORCE® Single Surface Mount Bracket (lights sold separately) #PNFSLBRK2LPH

• SAE: J595, Class 1 Certified

• CA Title 13: Article 22 Compliant

Custom Orders• EMC Tested and Certified, 72/245/EEC

• ECE Certified (ECE R65 can only be specified with 9 LED solid color) For custom orders, visit www.soundoffsignal.com, select products, perimeter lighting then nFORCE® surface mount for an order form.

#PNFSLBRK2LPH

Wire Hole

#PNFSLBRK2LPVnFORCE is the only Perimeter Lighting product line on the market that can be specifically tailored to your unique requirements.

Horizontal license plate bracket that accepts single surface mount nFORCE lights.

Features• New vehicle design integration







Dodge Charger Front


For customer orders, visitwww.soundoffsignal.com, select products, perimeter lighting then nFORCE surface mount for an order form.

Certifi cations: SAE: J595, Class 1 Certified

CA Title 13: Article 22 Compliant

EMC Tested and Certified, 72/245/EEC

ECE Certified (ECE R65 can only be specified with 9 LED solid color)

Vertical License plate bracket #PNFSLBRK2LPV

• 10-30 Vdc

• Xylex lens (improved chemical resistance)

• white or chrome housing

• Solid green LeD color or combined with other available colors

• amber LeD color combined with red, blue and white LeD colors

• white LeD color combined with red or blue LeD colors

• emC compliant models can only be specified with 9 LEDs and solid color

• Dual Module: choose alternative LED colors and/or combined color configurations

nforce is the only Perimeter Lighting product line on the market that can be specifically tailored

to your unique requirements. Visit www.soundoffsignal.com for an order form

when ordering any of these custom options.

SURFA

CE M

OU

NTS

37

Surface Mounts

Single Stop/tail Surface Mount 10-30 Vdc Black housing #EGHSTT2RB (red) #EGHSTT2AB (amber) Chrome housing #EGHSTT2RC (red) white housing #EGHSTT2RW (red) #EGHSTT2BW (blue) features• Sleek, narrow surface mount light, fits almost anywhere

• Premium optics offer optimal power and brightness

• Includes santoprene rubber mounting gasket and mounting hardware with 18” of 3-wire cable

Dual Stacked Surface Mount 10-30 Vdc 10-16 VdcBlack Housing #EGHST6(x)B #EGHST6(x)B-12Chrome Housing #EGHST6(x)C #EGHST6(x)C-12White Housing #EGHST6(x)W #EGHST6(x)W-12

Single Surface Mount 10-30 Vdc 10-16 Vdc Black Housing #EGHST2(x) #EGHST2(x)-12 Chrome Housing #EGHST2(x)C #EGHST2(x)C-12 White Housing #EGHST2(x)W #EGHST2(x)W-12

ece r65/eMc ECE 65 Certified (amber, blue and red only) (Xylex Lens; amber, blue and red only) Black Housing #EGHSTE2(x)-B #EGHSTE2(x)B-EUChrome Housing #EGHSTE2(x)-C #EGHSTE2(x)C-EUWhite Housing #EGHSTE2(x)-W #EGHSTE2(x)W-EU

accessoriesGhoSt Surface Mount Side Mirror Grommet (pair, lights sold separately)

Ford Interceptor Sedan Side mirror grommet

#PGHSTSMMFPI

A B G r W

A B D e f

G h J K L

M N P r W

rePLAce (x) IN orDer NUMBer for coLor SeLectIoN

Solid colors =

Dual/Split colors =

Single Surface mount Vertical License Plate Bracket

#PNFSLBRK2LPV

THINKnew

38

SuRF

AC

E M

ou

NTS


LIghT SYNC Yes

LeD COUNT Single: 6 LeDs or Dual Stacked: 12 LeDs (6 per module)

INPUT VOLTage 10-16 Vdc or 10-30 Vdc

CUrreNT Draw Single: 0.75 Amp (flash pattern dependent) or Dual Stacked: less than 1.5 Amp

OPeraTINg TemPeraTUre -40° C to +65° C / -40° F to +149° F

DImeNSIONS Single/Stop Tail: 5.7” (14 cm) L x 1.06” (2.7 cm) H x 1.8” (4.6 cm) D Dual Stacked: 5.4” (14 cm) L x 2.4” (6.1 cm) H x 1’ (2.5 cm) D

mOUNTINg Single: On 4.9” (12.4 cm) centers, Dual Stacked: 4.85” (12 cm) centers

CerTIFICaTIONS SAE J595, Class 1 certified; Article 22, CA Title 13 compliant; Two, ECE 65 certified and 72/245/EEC, EMC certified

warraNTY Five-year


For other GhOSt products, refer to the Deck/Grille Mounts on page 51 and the Recess Mounts on page 57.

SURFA

CE M

OU

NTS

39

Single Surface Mount Solid colors Split colors Black housing #EP2SSMDB(x) #EP2SSMBS(x) white housing #EP2SSMDB(x)W #EP2SSMWS(x)Chrome housing #EP2SSMDB(x)C #EP2SSMCS(x)

• wide, bright extreme angle output

• Light sync technology to synchronize your lights to alternate the flash patterns or flash simultaneously

• Includes santoprene rubber mounting gasket and mounting hardware with 18” of 3-wire cable

features

Dual Stacked Surface Mount Solid colors Black housing #eP2DSMDB(x) white housing #eP2DSMDB(x)W Chrome housing #eP2DSMDB(x)c

Dual Stacked Stop/tail Surface Mount* Solid colors

Black housing #eP2DSMStt(x) white housing #eP2DSMStt(x)W Chrome housing #eP2DSMStt(x)c

Dual Side-by-Side Surface Mount Solid Colors Black housing #EP2DSSDB(x) white housing #EP2DSSDB(x)W Chrome housing #EP2DSSDB(x)C

* Upper warning module can be Blue, Red or Amber. Bottom module is Red only with Stop/Tail function.

Surface Mounts

A B G r W

A B D e f

G h J K L

M N P r W


Solid colors =

Dual/Split colors =

40

90° Brackets (pair) #PPRSM9ØBRKT SuRF

AC

E M

ou

NTS

Vertical 45° Brackets (pair) #PPRSM45BRKT

accessories


LIghT SYNC Yes

LeD COUNT Single: 8 LeDs or Dual Stacked: 16 LeDs


CUrreNT Draw Single: 1.1 amp maximum or Dual Stacked: 2.0 amp maximum (flash pattern dependent)


DImeNSIONS Single: 4.5” (11 cm) W x 2.4” (6.0 cm) H x 1.25” (3.2 cm) D; Dual Stacked: 4.5” (11 cm) W x 3.8” (9.7 cm) H x 1.25” (3.2 cm) D Side-by-Side: 8.2” (21 cm) W x 2.4” (6.0 cm) H x 1.25” (3.2 cm) D

mOUNTS Single: 4.125” (1.0 cm) centers Dual Stacked: 4.14” (1.0 cm) centers Side-by-Side: 7.85” (20 cm) centers

CerTIFICaTIONS SAE J595, Class 1 certified and Article 22, CA Title 13 compliant

warraNTY Five-year


For other Predator II products, refer to the Deck/Grille Mounts, page 53 and Windshield Mounts on page 65.

41

SuRFA

CE M

ou

NTS

Mini Surface Mount 10-16 Vdc 10-30 Vdc 10-30 Vdc (ECE R65 Certified)#EL3SN(x) #EL3SN3Ø(x) #EL3SN30(x) (amber and blue only)

Mini Surface Mount

• high powered, versatile mini surface mount

• Our smallest compact size surface mount light

• many versatile mounting options with optional brackets and bezels for any vehicle and any mount

• Includes rubber mounting gasket and mounting hardware with 18” of 3-wire cable for hard wire installation

features

FLaSh PaTTerNS 33 flash patterns or eCe r-65: 3 flash patterns

LIghT SYNC Yes

LeD COUNT 3 LeDs


CUrreNT Draw < 0.5 amps


DImeNSIONS 2.5” (6.4 cm) W x 1.4” (3.6 cm) H x 1.25” (3.2 cm)

mOUNTINg 2.21” (5.6 cm) centers

CerTIFICaTIONS SAE J595 Class 1 certified; Article 22, CA Title 13 compliant (blue and red = 1 light, amber = 2 lights) and ECE R-65 Class 1 certified (amber and blue)

warraNTY Five-year



A B G r W

42

SuRF

AC

E M

ou

NTS

replace (x) for these available housing colors: Black=B, Chrome=C and White=W

Dual Stacked Bezel#PEL3BDS(x)

4” Round Fog Light Bezel 2013+ Ford Interceptor Utility#PEL3FLBKFSU

accessoriesLeD3 Mini Surface Mount Bezels (lights sold separately)

3.5” Round Fog Light Bezel 2011+ Dodge Charger#PEL3FLBKDC

Dual Side-by-Side Bezel#PEL3BZSS(x)

Single Bezel#PEL3BZSG(x)

LeD3 Mini Surface Mount Brackets (lights sold separately)

Universal grille Bracket#EL3SNBRK1GRU

90˚ Bracket#EL3SNBRK19Ø

Stacked 90˚ Bracket

horizontal #EL3SNBRK29ØV

Universal License Plate Bracket

horizontal #EL3SNBRK2LPHVertical #EL3SNBRK2LPV

45˚ Bracket

horizontal #EL3SNHBRK145Vertical #EL3SNBRK145

Side-by-Side 90˚ Bracket

#EL3SNBRK29ØH

Stacked 90˚ Bracket

Vertical #EL3SNBRK29ØV

thINKNeW

SURFA

CE M

OU

NTS

43

Surface MountBlack housing #ERPT1SSMDB(x)

Surface Mount

features• Durable Xylex molded lens and housing resists rust, corrosion and protects against harsh detergents

• extreme angle optics for a bright, wide signal

• Light sync technology to synchronize your lights

• Features treated and potted internal heat sink to protect the driver board and wires from moisture penetration

• Includes Santoprene rubber mounting gasket, 6” of 4-wire cable and mounting hardware for installation

FLaSh PaTTerNS 6 flash patterns (3 simultaneous, 3 alternating)

LIghT SYNC Yes

LeD COUNT 8 LeDs


CUrreNT Draw < 2.0 amps


DImeNSIONS 5” (12.6 cm) W x 2.8” (7.0 cm) H x 1.4” (3.5 cm) D

mOUNTINg 4.2” (10.5 cm) centers

CerTIFICaTIONS eCe 65 compliant (blue only)

warraNTY Five-year



A B r W

SURF

AC

E M

OU

NTS

44

fusion LiteBlack Housing #EFL1BØ(x)White Housing #EFL1WØ(x)(mounting screws included)

features


LIghT SYNC Yes

LeD COUNT 1 LeD


CUrreNT Draw < .5 amps

OPeraTINg TemPeraTUre -20˚ C to +65° C

DImeNSIONS 3.2” (8 cm) L x 1.7” (4.2 cm) W x .8” (2 cm) H

mOUNTINg Low Permanent mount: (0.58 cm) overall height 0.38” (0.1 cm) clearance High Permanent mount: (1.08) cm) overall height 2.35” (0.6 cm) clearance

CerTIFICaTIONS rohS and weee compliant and meets Sae J845 Class 3 requirements

warraNTY Five-year



• Light can be surface mounted to any flat area on any type of vehicle - elevate your safety and visibility by mounting to the headache rack

• Features cruise mode for steady burn if desired


• Permanent mount with 6” cable with bare wires for hard wire installation

Fusion Lite


A B r W

THINKnew

SURFA

CE M

OU

NTS

45

SuRFA

CE M

ou

NTS

Introducing the most comprehensive fender light offering on the market. Choose from either GHoST® or Intersector warning light solutions to upfit your

2012 Chevrolet Caprice vehicle.

Compass fender Lights: 2012 chevrolet caprice


DImeNSIONS 14 (35.6 cm) L x 2.75” (7 cm) W x 1.5” (3.8 cm) D

warraNTY Five-year


features• No other light offers 180 degree output - specially designed reflector amplifies and throws the light at the perfect angle to increase visibility at intersections

• The first light of its kind to offer critical intersection warning capabilities

• Includes Surface Mount Light with flasher module in your choice of LED colors; also includes mounting hardware with 36” of 3-wire cable

• U.S. Patent #D636,113 (light only). Other patents pending.

• Sleek, narrow and flush surface mount light

• Premium optics offer the most power and brightness from a light of this size

• Includes surface mount light in your choice of LED colors; also includes mounting hardware with 36” of 3-wire cable

Intersector fender Light #ECPNTKC1B(xx) (pair, right side shown)

GhoSt fender Light #ECPGHKC1B(xx)(pair, right side shown)

features

THINKnew

THINKnew

Visit our website for an order form for vehicle specific mounting options.

Replace (xx) in Order Number for Color Selection:one x for left side, other x for right side.

Solid colors =

A B G r W

A B G r W

A B D e f

G h J K L

M N P r W

Replace (xx) in Order Number for Color Selection:

one x for left side, other x for right side.

Solid colors =

Dual/Split colors =

SURF

AC

E M

OU

NTS

46

SuRF

AC

E M

ou

NTS

Compass fender Lights: 2013 ford Interceptor Sedan

features• No other light offers 180 degree output - specially designed reflector amplifies and throws the light at the perfect angle to increase visibility at intersections

• The first light of its kind to offer critical intersection warning capabilities

• Includes Surface Mount Light with flasher module in your choice of LED colors; also includes mounting hardware with 36” of 3-wire cable

• U.S. Patent #D636,113 (light only). Other patents pending.

• Sleek, narrow and flush surface mount light

• Premium optics offer the most power and brightness from a light of this size

• Includes surface mount light in your choice of LED colors; also includes mounting hardware with 36” of 3-wire cable

Intersector fender Light #ECPNTKF1B(xx)(pair, right side shown)

GhoSt fender Light #ECPGHKF1B(xx) (pair, right side shown)

features


DImeNSIONS 9.5” (24 cm) L x 2.75” (7 cm) W x .5” (1.3 cm) D

warraNTY Five-year


THINKnew

THINKnew

A B G r W

A B D e f

G h J K L

M N P r W

Replace (xx) in Order Numberfor Color Selection:

one x for left side, other x for right side.

Solid colors =

Dual/Split colors =

Introducing the most comprehensive fender light offering on the market. Choose from either GHoST® or Intersector warning light solutions to upfit your

2013 Ford Interceptor vehicle.

Visit our website for an order form for vehicle specific mounting options.

Replace (xx) in Order Number for Color Selection:one x for left side, other x for right side.

Solid colors =

A B G r W

47

SuRFA

CE M

ou

NTS

running LightnLINE

rePLAce (xx) IN orDer NUMBer for coLor SeLectIoN

Solid colors =

AA BB rr

Split color =

JJ

36” Running Light #ENL236(xx)48” Running Light #ENL248(xx)60” Running Light #ENL260(xx)72” Running Light #ENL272(xx)

features• Light can be surface mounted to any flat area on any type of vehicle

• Prime applications include: rocker panels, push bumpers, tailgates and headache racks

• Distributes exceptional profile visibility to dangerous intersections

• Features steady burn option

• Compact extruded aluminum housing is visually inconspicuous and weather resistant

• 19 inches of wire cable for hard wire installation

48” Length Shown | Sold in pairs | Does not include mounting hardware

THINKnew

48

SuRF

AC

E M

ou

NTS


LIghT SYNC Yes


CUrreNT Draw 0.58 amps @ 16 Vdc


DImeNSIONS 36” (91.4 cm) W, 48” (121.9 cm) W, 60” (152.4 cm) W and 72” (182.9 cm) x .75” (1.9 cm) D

mOUNTINg Surface mount

warraNTY Three-year


49

dEC

K/GRILLE M

ou

NTS

Dual Side-by-Side Deck/Grille Mount 6 LeD, Solid or Split Color #ENFDGS1(xx) 9 LED, Solid Color #ENFDGS2(xx) 12 LeD, Solid or Dual Color #ENFDGS3(xx) 18 LED, Tri Color - Blue/Red/Amber #ENFDGS4BRA 18 LED, Tri Color - Blue/Red/White #ENFDGS4BRW

High Output9 LED, Solid Color - Amber/Amber #ENFDGS2AA-PC

Xylex Lens and ECE R659 LED, Solid Color - Amber/Amber, #ENFDGE2(xx)Blue/Amber, Blue/Blue and Red/Red

Deck/Grille MountsFORCENEXUS TECHNOLOGY

R

Single Deck/Grille Mount 6 LeD, Solid or Split Color #ENFSGS1(x) 9 LED, Solid Color #ENFSGS2(x) 12 LeD, Solid or Dual #ENFSGS3(x) 18 LED, Tri Color - Blue/Red/Amber #ENFSGS4BRA

18 LED, Tri Color - Blue/Red/White #ENFSGS4BRW

High Output

9 LED, Solid Color - Amber #ENFSGS2A-PC

Xylex Lens and ECE R65

9 LED, Solid Color - amber, Blue, #ENFSGE2(x)red or white

THINKnew

THINKnew

• 10-30 Vdc






• emC compliant models can only be specified with 9 LEDs and solid color

• Dual module: choose alternative LeD colors and/or combined color configurations



when ordering any of these custom options.Single Solid Colors (x) = A = amber, B = blue, R = red and W = white Single Light, 6 LED Split Colors (x) = J = red/blue Single Light, 12 LED Dual Colors (x) = J = red/blue Dual Light, Solid Colors (xx) =

AA = amber/amber, AW = amber/white, BA = blue/amber, BB = blue/blue, BW = blue/white, RA = red/amber, RB =red/blue, RR = red/red and RW = red/white Dual Light, 6 LED Split Colors (xx) = JJ = red/blue Dual Light, 12 LED Dual Colors (xx) = JJ = red/blue Tri Colors = BRA = blue/red/amber and BRW = blue/red/white (18 LED only) 9 LED available only in Solid Colors (x) = A = amber, B = blue, R = red and W = white

U.S. and Foreign patents pending STANDARD COLORS AVAILABLE


replace the (x) or (xx) in part number for color selection.

50

dEC

K/G

RILL

E M

ou

NTS

6 LeD Solid: Split:

9 LeD Solid:

12 LeD Solid: Dual:

18 LeD tri-color:






6 LeD Single Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc 6 LeD Split Color < 1.0 amps @ 12.8Vdc < 0.6a amps @ 25.6Vdc 9 LED Single Color < 1.5 Amps @ 12.8Vdc < 0.9A Amps @ 25.6Vdc 12 LeD Single Color < 2.0 amps @ 12.8Vdc < 1.2a amps @ 25.6Vdc 12 LeD Split Color < 1.0 amps @ 12.8Vdc < 0.6a amps @ 25.6Vdc 18 LeD Tri-Color < 1.0 amps @ 12.8Vdc < 0.6a amps @ 25.6Vdc


DImeNSIONS Single: 5.0” (12.7 cm) L x 1.88” (4.7 cm) H x 1.82 (4.3 cm) D

Dual: 9.50” (24.1 cm) L x 1.88” (4.7 cm) H x 1.82” (4.3 cm) D CerTIFICaTIONS SAE J595, Class 1 certified; CA Title 13, Article 22 compliant; EMC 72/245/EEC certified; and ECE R65, Category X, Class 2 certified (ECE R65 can only be specified with 9 LED solid color)

warraNTY Five-year

features• New vehicle design integration






For other nFORCE products, refer to the Exterior Lightbar, page 5; Interior Rear Deck Lightbar, page 15; Interior Windshield Lightbar, page 16; Traffic Controller page 23; Surface Mounts, page 35;

Recess Mount, page 56 and the Windshield Mounts, page 59.

51

dEC

K/GRILLE M

ou

NTS

features

Single Multi-Mount 10-16 Vdc 10-30 Vdc ece r65/eMc Xylex Lens (amber, bue or red)

Black housing #EGHST1(x)-12 #EGHST1(x) #EGHSTE1(x)B #EGHSTE1(x)B-EUwhite housing #EGHST1(x)W-12 #EGHST1(x)W #EGHSTE1(x)W #EGHSTE1(x)W-EUIncludes three mounting options: Permanent, edge and 3m adhesive mount Dual Multi-Mount 10-16 Vdc 10-30 VdcBlack housing #EGHDT1(xx)-12 #EGHDT1(xx)white housing #EGHDT1(xx)W-12 #EGHDT1(xx)W Includes three mounting options: Permanent, Dual edge and 3m adhesive mount Single Stop/tail Multi-Mount 10-16 VdcBlack housing #EGHSTTRwhite housing #EGHSTTRW Includes two mounting options: Permanent and 3m adhesive mount

• Sleek, narrow surface mount light, fits almost anywhere

• Premium optics offer optimal power and brightness

• Red Stop/Tail model is a low power, steady-on red running light once brake is applied, light flashes 5 times and remains on at full power while brake is activated

• Includes 18” of 3-wire cable

• rock Light offers an anti-crush, super duty bracket for the most demanding applications and environments

• extreme duty rock Bracket offers up to 30 degrees of light head adjustability to angle light

Permanent mount

Deck/Grille Mounts

Single edge mount

Single edge

Permanent

A B G r W

A B D e f

G h J K L

M N P r W


Solid colors =

Dual/Split colors =

Single/Dual Multi and Single Stop/tail Mounting options

Dual edge

3m adhesive

52

dEC

K/G

RILL

E M

ou

NTS

rock Light 10-16 Vdc 10-30 VdcWarning #EGHST3(x)-12 #EGHST3(x)Stop/Tail #EGHSTT3R

rock Light

techNIcAL SPecIfIcAtIoNS FLaSh PaTTerNS 33 flash patterns

LIghT SYNC Yes

LeD COUNT 6 LeDs


CUrreNT Draw < 0.75 Amps per module @ 12.8 Vdc


DImeNSIONS multi: 4” (10 cm) L x 0.9” (2.3 cm) H x 1.8” (4.6 cm) D

rock: 4.8” (12 cm) L x 2” (5.1 cm) H x 1.6” (4.1 cm) D

mOUNTINg multi: Permanent, edge or adhesive mount

Stop Tail: Permanent or adhesive mount

CerTIFICaTIONS SAE J595, Class 1 certified; CA Title 13: Article 22 compliant; EMC certified, 72/245/EEC and

eCe 65, Category X, Class 1 certified

warraNTY Five-year

For other GhOSt products, refer to the Surface Mounts on page 37 and the Recess Mount on page 57.

53

dEC

K/GRILLE M

ou

NTS

Dual Side-by-Side Deck/Grille Mount Dual Light #EP2DGS1(x)

• Brackets allow 120° of light head adjustment to angle the light

• Flash pattern recall remembers last flash pattern used

• Convenient side wire exit for easier installation

• Includes 18” of 3-wire cable

features

Deck/Grille Mounts

A B G r W

A B D e f

G h J K L

M N P r W


Solid colors =

Dual/Split colors =

Single Deck/Grille MountSingle Light, Solid Color #EP2SGS1(x)Single Light, Split Color #EP2SGS2(x)


LIghT SYNC Yes

LeD COUNT Single: 8 LeDs or Dual: 16 LeDs


CUrreNT Draw Single: 1.1 amps maximum, Dual: 2 amps maximum (flash pattern dependent)


DImeNSIONS (single) 4.3” (11 cm) L x 2.4” (7 cm) H x 1.75” (4.4 cm) D

(dual) 8.5” (22 cm) L x 2.4” (7 cm) H x 1.75” (4.4 cm) D

mOUNTINg Surface mount on 2.77” (7.0 cm) centers

CerTIFICaTIONS SAE J595 Class 1 certified and CA Title 13, Article 22 compliant

warraNTY Five-year

For other Predator II products, refer to the Surface Mounts, page 39 and the Windshield Mounts on page 65.

54

dEC

K/G

RILL

E M

ou

NTS

#EL6GD(x)

• Brilliant LeDs packed into a small and aerodynamic shape with adjustable bracket that can tilt the light head down 10 degrees or up 20 degrees to angle the output where you need it

• Adjustable stainless steel bracket allows a minimum height of 3” (shown) or a maximum height of 3.4”

features

Deck/Grille Mount

A B G r W

A B D e f

G h J K L

M N P r W


Solid colors =

Dual/Split colors =

Deck/Grille Mount


LIghT SYNC Yes

LeD COUNT 6 LeDs


CUrreNT Draw > 1 amp @ 12.8 Vdc (flash pattern dependent)


DImeNSIONS 5” (13 cm) W x 2.6” (6.6 cm) D x H 3.1 “ (7.9 cm) minimum / 3.4” (8.6 cm) maximum

mOUNINg Deck/Grille mount


warraNTY Five-year

55

WA

RNIN

G TRu

NK LIG

HT

Chevrolet Impala or Dodge Charger #ETLKCØ6U(x) Ford Crown Victoria #ETLKCØ2CV(x)

LeD3 Cargo warning Trunk light features 2-LeD3 mini warning lights with attached white LeD Interior Light

A, B, R & W color codes = both lights are the same color

H, J, M & K color codes =1 light of each color

A B h J

M K r W

rePLAce (x) IN orDer NUMBer for coLor SeLectIoN =

features• Offers bright trunk illumination with a distinct safety advantage - when the trunk is open powerful LeD3 mini Lights provide a critical rear warning signal

• Vehicle specific brackets available for Ford Crown Victoria, Chevrolet Impala or Dodge Charger

• Integrated Interior LED cargo light with 3 bright white LEDs that clearly illuminate dark cargo/trunk areas - no more fumbling around in the dark

• LED lights feature a low amp draw that won’t burden your electrical system

• Interior cargo light is easy to install with a simple 2-wire connection - light has a 20” wire length

• Each LED3 end module has 18” of cable

Warning trunk Light


LIghT SYNC Yes

LeD COUNT 3 LeDs


CUrreNT Draw LeD3 modules: 0.5 amp (each), Interior Light: less than 0.5 amp

DImeNSIONS 20” (51 cm) L x 5.8” (15 cm) H x 1.4” (3.6 cm) D

mOUNTINg Surface mount with supplied brackets


warraNTY Five-year

56

REC

ESS

Mo

uN

TS

recess Mount 6 LeD, Solid or Split Color #ENFSRS1(x) 9 LED, Solid Color #ENFSRS2(x) 12 LeD, Solid or Dual Color #ENFSRS3(x) 18 LED, Tri Color - Blue/Red/Amber #ENFSRS4BRA

18 LED, Tri Color - Blue/Red/White #ENFSRS4BRW Xylex Lens and ECE R659 LED, Solid Color - Amber, Blue, Red or White #ENFSRE2(x)

• New vehicle design Integration




features6 LeD Solid: Split:

9 LeD Solid:

12 LeD Solid: Dual:

18 LeD tri-color:


recess MountFORCENEXUS TECHNOLOGY

R





6 LeD Single Color < 1.0 amps @ 12.8 Vdc < 0.6 amps @ 25.6 Vdc 6 LeD Split Color < 1.0 amps @ 12.8 Vdc < 0.6 amps @ 25.6 Vdc 9 LED Single Color < 1.5 Amps @ 12.8 Vdc < 0.9 Amps @ 25.6 Vdc 12 LeD Single Color < 2.0 amps @ 12.8 Vdc < 1.2 amps @ 25.6 Vdc 12 LeD Split Color < 1.0 amps @ 12.8 Vdc < 0.6 amps @ 25.6 Vdc 18 LeD Tri-Color < 1.0 amps @ 12.8 Vdc < 0.6 amps @ 25.6 Vdc


DImeNSIONS 5.0” (12.7 cm) L x 1.88” (4.8 cm) H x 1.82 (4.6 cm) D CerTIFICaTIONS SAE J595, Class 1 certified; CA Title 13, Article 22 compliant; EMC 72/245/EEC certified; and ECE R65, Category X, Class 2 certified (ECE R65 can only be specified with 9 LED solid color)

warraNTY Five-year

STANDARD COLORS AVAILABLE for Module LeD color Patterns, refer to chart above. replace the (x) or (xx) in part number for color selection.

Single Solid Colors (x) = A = amber, B = blue, R = red and W = white

Single Light, 6 LED Split Colors (x) = J = red/blue

Single Light, 12 LED Dual Colors (x) = J = red/blue

Tri Colors = BRA = blue/red/amber and BRW = blue/red/white (18 LED only) 9 LED available only in Solid Colors (x) = A = amber, B = blue, R = red and W = white

For custom order information, refer to the nFORCE Deck/Grille Mounts on page 49.

THINKnew


Deck/Grille Mounts, page 49 and the Windshield Mounts on page 59.


57

RECESS M

ou

NTS

recess Mount 10-30 Vdc 10-16 Vdc ece r65/eMc 10-30 Vdc Stop tail 10-30 VdcBlack housing #EGHST5(x)B #EGHST5(x)B-12 EGHSTE5(x)B-EU EGHSTT5(x)B

Chrome housing #EGHST5(x)C #EGHST5(x)C-12 EGHSTE5(x)C-EU EGHSTT5(x)Cwhite housing #EGHST5(x)W #EGHST5(x)W-12 EGHSTE5(x)W-EU EGHSTT5(x)W

• Just 0.3 inches (0.8 cm) from the body of the vehicle when installed

• housing is made from die cast aluminum

• Black and white housings are powder coated while chrome housing is a high luster, nickel plated finish

• Same power and intensity as the original ghOST mini light

• Light includes Santoprene rubber gasket and 38 inch (97 cm) wire length for hardwire installation

features

A B G r W

A B D e f

G h J K L

M N P r W


Solid colors =

Dual/Split colors =

recess Mounts


LIghT SYNC Yes

LeD COUNT 6 LeDs


CUrreNT Draw 0.75 Amps/module @ 12.8 Vdc (flash pattern dependent)


DImeNSIONS 4.7” (11.9 cm) W x 1.6” (4.1 cm) H x 1” (2.5 cm) D

mOUNTINg recess mount

CerTIFICaTIONS SAE J595, Class 1 certified; CA Title 13: Article 22 compliant; EMC certified, 72/245/EEC and

eCe 65, Category X, Class 1 certified

warraNTY Five-year

For other GhOSt products, refer to the Surface Mounts on page 37 and the Deck/Grille Mounts on page 51.

58

REC

ESS

Mo

uN

TS

fog Light KitsChevrolet Tahoe 2013+ #EKTHFLG3AA (amber lens/amber LEDs)

Chevrolet Tahoe 2013+ #EKTHFLG3(x)CDodge Charger 2010 or older #EDCFLG3(x)CDodge Charger 2010 or older #EKDCFLG3AA (amber lens/amber LEDs)

4” round Warning Lights

features

Chrome Dress ring #ECVR4CHRM

• Offers unmatched power and brightness in a 4” round light

• Durable, UV resistant polycarbonate lens prevents yellowing or fading of the lens

• Flash pattern recall remembers last flash pattern used

• Light sync technology to synchronize your lights

• Includes black rubber grommet and 18” of 3-wire cable for hard wire installation

Dodge Charger Fog Light Bracket (2013) #ERDREBZBKDD (pair)

Dodge Charger Fog Lamp Bracket (2010 and older) (mounts as a recess mount into 4.5” round cutouts)

#ERDREBZBKDC (pair)

accessories


LIghT SYNC Yes

LeD COUNT 6 LeDs


CUrreNT Draw 1.0 amp @ 12.8 Vdc


DImeNSIONS Light: 4” (10 cm) Diameter x 1.25” (3 cm) D Grommet: 5.2” (13 cm) Diameter x 1.25” (3 cm) D

Chrome Dressing: 5.75” (14 cm) Diameter x 0.44” (1 cm) D

mOUNTINg recess and Fog Light mounts

CerTIFICaTIONS SAE: J595 Class 1 certified and CA Title 13, Article 22 compliant

warraNTY Five-year

A B r W


clear Lens =

Chevy Tahoe Fog Light Bracket (2013) #ERDREBZBKTH (pair)

thINKNeW

4” round Warning LightsClear Lens #ERDREBZ3(x)CColor Lens - Amber/Amber #ERDREBZ3AA

R4 Series

59

WIN

dSH

IELd LIG

HTS

Single Permanent Mount(includes shroud and bare wires)

6 LeD, Solid or Split Color #ENFSWP1(x)

9 LED, Solid Color #ENFSWP2(x)

12 LeD, Solid or Dual Color #ENFSWP3(x)

18 LED, Tri Color - Blue/Red/Amber #ENFSWP4BRA

18 LED, Tri Color - Blue/Red/White #ENFSWP4BRW

High Output

9 LED, Solid Color - Amber #ENFSWP2A-PC

Single Interior Windshield LightFORCENEXUS TECHNOLOGY

R

Single Suction cup Mount (includes shroud and 12v Cig plug with 11.5 foot cord)

6 LeD, Solid or Split Color #ENFSWS1(x)

9 LED, Solid Color #ENFSWS2(x)

12 LeD, Solid or Dual Color #ENFSWS3(x)

18 LED, Tri Color - Blue/Red/Amber #ENFSWS4BRA

18 LED, Tri Color - Blue/Red/White #ENFSWS4BRW

High Output

9 LED, Solid Color - Amber #ENFSWS2A-PC

THINKnew

• 10-30 Vdc






• EMC compliant models can only be specified with 9 LeDs and solid color





features STANDARD COLORS AVAILABLE


replace the (x) in part number for color selection.










60

WIN

dSH

IELd

LIG

HTS

6 LeD Solid: Split:

9 LeD Solid:

12 LeD Solid: Dual:

18 LeD tri-color:






6 LeD Single Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc 6 LeD Split Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc 9 LED Single Color < 1.5 Amps @ 12.8Vdc < 0.9 Amps @ 25.6Vdc 12 LeD Single Color < 2.0 amps @ 12.8Vdc < 1.2 amps @ 25.6Vdc 12 LeD Split Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc 18 LeD Tri-Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc


DImeNSIONS 6.80” (cm) L x 1.43” (3.6 cm) H x 5” (12.7 cm) D CerTIFICaTIONS SAE J595, Class 1 certified; CA Title 13, Article 22 compliant and EMC certified, 72/245/EEC

warraNTY Five-year


Deck/Grille Mounts, page 49 and the Recess Mount on page 56.

61

WIN

dSH

IELd LIG

HTS

Dual Side-by-Side Permanent Mount (includes shroud and bare wires)

6 LeD, Solid or Split Color #ENFDWP1(xx)

9 LED, Solid Color #ENFDWP2(xx)

12 LeD, Solid or Dual Color #ENFDWP3(xx)

18 LED, Tri Color - Blue/Red/Amber #ENFDWP4BRA

18 LED, Tri Color - Blue/Red/White #ENFDWP4BRW

High Output

9 LED, Solid Color - Amber/Amber #ENFDWP2AA-PC

Dual Side-by-Side Interior Windshield Light


R

Dual Side-by-Side Suction cup Mount (includes shroud and 12v Cig plug with 11.5 foot cord)

6 LeD, Solid or Split Color #ENFDWS1(xx)

9 LED, Solid Color #ENFDWS2(xx)

12 LeD, Solid or Dual Color #ENFDWS3(xx)

18 LED, Tri Color - Blue/Red/Amber #ENFDWS4BRA

18 LED, Tri Color - Blue/Red/White #ENFDWS4BRW

High Output

9 LED, Solid Color - Amber/Amber #ENFDWS2AA-PC

THINKnew

features• New vehicle design integration







• 10-30 Vdc






• EMC compliant models can only be specified with 9 LeDs and solid color





STANDARD COLORS AVAILABLE


replace the (x) in part number for color selection.



62

WIN

dSH

IELd

LIG

HTS

6 LeD Solid: Split:

9 LeD Solid:

12 LeD Solid: Dual:

18 LeD tri-color:






6 LeD Single Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc 6 LeD Split Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc 9 LED Single Color < 1.5 Amps @ 12.8Vdc < 0.9 Amps @ 25.6Vdc 12 LeD Single Color < 2.0 amps @ 12.8Vdc < 1.2 amps @ 25.6Vdc 12 LeD Split Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc 18 LeD Tri-Color < 1.0 amps @ 12.8Vdc < 0.6 amps @ 25.6Vdc


DImeNSIONS 11.35 (28.8 cm) L x 1.43” (3.6 cm) H x 5” (12.7 cm) D CerTIFICaTIONS SAE J595, Class 1 certified; CA Title 13, Article 22 compliant and EMC certified, 72/245/EEC

warraNTY Five-year


Deck/Grille Mounts, page 49 and the Recess Mount on page 56.

63

WIN

dSH

IELd LIG

HTS

Interior Windshield Lights

A B G r W

A B D e f

G h J K L

M N P r W


Solid colors =

Dual/Split colors =

features• Bright LeD modules line these versatile warning bars for maximum output and impact

• Single warning tips available on the 8 module bar

• 12 module bar available with optional single or dual warning tips in your choice of color

4 Module Interior Windshield LightSuction Cup mount #EL3HØ4AØ+(x)

2 Module Interior Windshield LightSuction Cup mount #EL3HØ2AØ+(x)

Suction cup mount bars include 12 volt cigar plug with 11.5 feet of cord (shown), shroud, suction cup mount, and a pair of universal brackets

for optional permanent headliner mount

64

WIN

dSH

IELd

LIG

HTS

12 Module Interior Windshield LightPermanent headliner mount #EL3Z12AØØ(x)

techNIcAL SPecIfIcAtIoNS FLaSh PaTTerNS 2 module: 33 flash patterns

4 module: 21 flash patterns

8 or 12 Module: Solid Color - 20 Arrow and 12 Warning, Split Color - 19 Warning

LIghT SYNC No

LeD COUNT 2 module: 6 LeDs, 4 module: 12 LeDs, 8 module: 24 LeDs and 12 module: 36 LeDs


CUrreNT Draw < 1.0 amp for every 2 modules (flash pattern dependent) and 12.8 Vdc


DImeNSIONS 2 Module: 7” (18 cm) L x 1.5” (3.8 cm) H x 3.6” (9.1 cm) D

4 Module: 13.25” (34 cm) L x 1.5” (3.8 cm) H x 3.6” (9.1 cm) D

8 Module: 26” (66 cm) L x 1.5” (3.8 cm) H x 3.6” (9.1 cm) D

12 Module: 38.75” (98 cm) L x 1.5” (3.8 cm) H x 3.6” (9.1 cm) D

mOUNTINg Surface mounts on 2.77” (7.0 cm) centers or Suction Cup mount

CerTIFICaTIONS SAE: J595 Class 1 certified and CA Title 13, Article 22 compliant

warraNTY Five-year

Permanent headliner mount bars includes a pair of universal permanent headliner mount brackets with 14’ of shielded cable for hard wire installation (shown) and shrouds (1 shroud per 4 module length)

8 Module Interior Windshield LightPermanent headliner mount #EL3ZØ8AØØ(x)

For other UltraLItE products, refer to the Exterior Directional Warning Bars on page 25 and the Interior Directional Warning Bars on page 27.

Refer to page 28 for accessories.

65

WIN

dSH

IELd LIG

HTS • Narrow, low profile which can be mounted above or below the rear view mirror or installed in rear windows

• Customizable shroud is pre-scored so you can easily cut it to fit your windshield angle to reduce flashback

• Lexan polycarbonate lens is engineered for maximum light output with UV resistant properties to prevent fading

• Includes Universal Shroud and 12v DC Plug with 11.5’ cord length

features

Single Windshield LightPermanent mount #EP2SWSA+(x) Suction Cup mount #EP2SWS+(x)

Dual Side-by-SIde Windshield LightPermanent mount #EP2DWSA+(x) Suction Cup mount #EP2DWS+(x)

Windshield Lights

A B G r W

A B D e f

G h J K L

M N P r W


Solid colors =

Dual/Split colors =


LIghT SYNC No

LeD COUNT Single: 8 LeDs or Dual: 16 LeDs


CUrreNT Draw Single: 1.1 amps maximum and Dual: 2 amps maximum (flash pattern dependent)


DImeNSIONS Single: 3.8” (10 cm) L x 1.9” (4.8 cm) H x 6.9” (18 cm) D

Dual: 7.3” (1.9 cm) L x 1.9” (4.8 cm) H x 6.9” (18 cm) D

mOUNTINg Surface mounts on 2.77” (7.0 cm) centers


warraNTY Five-year

For other Predator II products, refer to the Surface Mounts on page 39 and Deck/Grille Mounts on page 53.

cA title 13 Lights (with cig mount)

Single, Permanent mount #EP2SWS1A+R (red)

Dual, Permanent mount #EP2DWS1A+J (red/blue) Dual, Permanent mount #EP2DWS1A+R (red) Single, Suction Cup mount #EP2SWS1+R (red)

Dual, Suction Cup mount #EP2DWS1+J (red/blue)

Single or Dual Permanent mount Bracket #PPRH1BKT

accessories

66

VIS

oR

LIG

HT

LeD Visor LightStandard #ELV3BVS+(x) California Title 13 Steady Patterns #ELV3BVC+J (red/blue)

#ELV3BVC+R (red/red)

• Ideal for undercover vehicles

• Smaller and more powerful with 8 LeDs per module

• Flash Pattern recall remembers last flash pattern used

• Easy to install - simply wrap velcro strap light around visor and plug into 12 vdc outlet (11.5’ cord length)

LeD Visor LightPremium

features

A B r

D J


Solid colors =

Dual/Split colors =


LeD COUNT 8 LeDs per module


CUrreNT Draw 0.75 Amps @ 12.8 Vdc, 0.35 amps @ 25.6 Vdc


DImeNSIONS 11” (28 cm) L x 2.6” (6.6 cm) H x 0.9” (2.3 cm) D

CerTIFICaTIONS SAE J595 Class 1 certified and CA Title 13, Article 22 compliant (red/blue and red/red only)

warraNTY Five-year

67

LEd IN

SERTS AN

d BEZELS

Screw-In LeD Inserts 10-16 Vdc 10-30 Vdc10’ Cable Length #ELUC2SØ1Ø(x) #ELUC2HØ1Ø(x)25’ Cable Length #ELUC2SØ25(x)

Includes extreme angle lens, inline flasher and cable for hardwire installation

• LED ‘hide away’ insert elevates safety lighting with interchangeable lenses that tailor the light output to complement your mounting application

• 2 additional lenses available for customized light output

• Retrofits with existing 1” strobe tube cutouts in headlight, taillight or corner lights in all types of commercial vehicles

• Optional cruise mode reduces light output to 20% brightness

• Use with optional bezels to surface mount to any flat area on the vehicle body for additional lighting anywhere

features

LeD Inserts and Bezels

Screw-In Insert with Bezel 10-16 VdcBlack #ELUC2SB1Ø(x) Chrome #ELUC2SC1Ø(x)White #ELUC2SW1Ø(x) Includes extreme angle lens and 10’ cable, inline flasher with bezel, mounting gasket and hardware

twist-In LeD Insert: ford PI 2013 Utility10-16 Vdc, 10’ Cable Length #ELUCTSØ1Ø(x) Includes extreme angle lens, inline flasher and collar kit

Push-In LeD Insert10-16 Vdc, 10’ Cable Length #ELUCPSØ1Ø(x)10-16 Vdc, 25’ Cable Length #ELUCPSØ25(x) 10-30 Vdc, 10’ Cable Length #ELUCPHØ1Ø(x)

Includes insert, extreme angle lens, grommet and inline flasher

thINKNeW

thINKNeW

68

LEd

INSE

RTS

AN

d B

EZEL

S

Additional Lensextreme angle #PLUC2LN1E Vertical #PLUC2LN1V horizontal #PLUC2LN1H

BezelsBlack #PLUC2HSBChrome #PLUC2HSCwhite #PLUC2HSW

Includes mounting gasket and hardware

A B G r W

A B D e f

G h J K L

M N P r W


Solid colors =

Dual/Split colors =

accessories


LIghT SYNC Yes

LeD COUNT 6 LeDs


CUrreNT Draw < 1.0 amp (flash pattern dependent) at 12.8 Vdc

OPeraTINg TemPeraTUre -40° C to +65° C

DImeNSIONS Insert: 1.5” (3.8 cm) Diameter x 0.9” (2.3 cm) H

Bezel: 2.2” (5.6 cm) L x 1.65” (4.2 cm) H x 0.63” (1.6 cm) D

mOUNTINg Headlight/Taillight mount into 1” Diameter cutouts; Screw-In Surface mount with optional

bezel. Bezel mounts on 1.89” (4.8 cm) centers. Twin-In or Push-In options are also available.

CerTIFICaTIONS emC: eCe r10 (10-16 Vdc only)

warraNTY Five-year

Lights sold separately

69

STRoBE Po

WER Su

PPLIES

Nebula Strobe Power Supply #ETN66Ø-P

features

• Single pattern select wire for easier pattern selection and low power mode with lower amp draw

• Features high/low intensity control, selective switching, RF/RFM filtration and reverse polarity protection

Galileo Strobe Power Supply #ETG69Ø-P

features• Single pattern select wire for easier pattern selection and low power mode with lower amp draw


Photon Strobe Power Supply #ETPN475

features

Strobe Power Supplies

techNIcAL SPecIfIcAtIoNS FLaSh PaTTerNS 7 flash patterns: Quad, Double, Quint, Warp, Inter-cycle, Triple and Single

TeChNOLOgY 6 outputs / 60 Watts


CUrreNT Draw 6 amp draw @ 12 Volts

warraNTY Two-year

techNIcAL SPecIfIcAtIoNS FLaSh PaTTerNS 7 flash patterns: Quad, Double, Quint, Warp, Inter-cycle, Triple and Single



CUrreNT Draw 9 Amp draw @ 12 Volts

warraNTY Two-year

techNIcAL SPecIfIcAtIoNS FLaSh PaTTerNS 5 flash patterns: InterCycle, WarpFlash, Double, Quad and Quint



CUrreNT Draw 7.5 Amp draw @ 12 Volts

warraNTY Five-year


70

SIRE

NS

AN

D S

PEA

KERS

Visit www.soundoffsignal.com for speaker bracket installation sheets.

Sirens ● nERGY™ 400 Series 71 Knob Console 71 Button Console 71 Handheld 72 Remote 72

● 200 Series Compact 73

Speakers● 100 Series Professional 74 100C 74 100D 75 100E 75 100H 74 100L 76

● 420 Series Continuous Duty 77

70

71

SIRENS

Features

Button Console Siren #ETSA481CSP 100 Watt

#ETSA482CSP 200 Watt

Note: 2 speakers required with the 200 watt version

400 Series Sirens

Knob Console Siren #ETSA481CSR 100 Watt

#ETSA482CSR 200 Watt

• 200 watt sirens feature dual-tone capability to deliver two siren tones at once to provide officers with extreme “traffic moving” capability

• Console Sirens feature eight auxiliary buttons for one-touch programming and a three-position slide switch to allow convenient switching for the most frequently used warning modes

• Features an eight-second buzzer alert to notify users that the level or auxiliary buttons are activated

• Horn ring scroll provides ability to quickly change tones with the tap of the horn

• Provides up to nine 10 amp and three 20 amp outputs with internal fuses for powering solenoids (i.e. gunlock) or supplying power and signaling to other onboard peripherals (printer, radar, GPS, etc.)

• Built-in protection against over/under voltage, short circuit and reverse polarity

• New switch panel graphics integrate with the interiors of newly designed vehicles

• Cabling setup is the same as 380R Siren Series allowing for easy swap-in

Visit www.soundoffsignal.com to hear the tones!

WATTS 100 and 200 Watt

INPUT VOLTAGE 10-16 Vdc

DImENSIONS Console Faceplate: 3.17” (8.5 cm) H x 7.54” (19.15 cm) W

Console Amp: 2.64” (6.73 cm) H x 7.02” (17.84 cm) W

Cut-out: 2.72” (6.91 cm) H x 7.10” (18.034 cm) W

CERTIFICATIONS SAE J1849 certified and CA Title 13, Article 22 compliant

WARRANTY Three-year


72

SIRE

NS

Features

Handheld Siren #ETSA461HPP 100 Watt

#ETSA462HPP 200 Watt

Remote Siren #ETSA481RSP 100 Watt

#ETSA482RSP 200 Watt

Handheld Sirens provide unique competitive advantages including: LED, Alley and Arrow handheld switch indicators for convenient viewing, extensive programmability and a 200 watt dual-tone option

Note: 2 speakers required with the 200 watt version

• 200 watt sirens feature dual-tone capability to deliver two siren tones at once to provide officers with extreme “traffic moving” capability

• Features an eight-second buzzer alert to notify users that the level or auxiliary buttons are activated

• Horn ring scroll provides ability to quickly change tones with the tap of the horn

• Provides up to seven 10 amp and three 20 amp outputs with internal fuses for powering solenoids (i.e. gunlock) or supplying power and signaling to other onboard peripherals (printer, radar, GPS, etc.)

• Built-in protection against over/under voltage, short circuit and reverse polarity

• Cabling setup is the same as 380R Siren Series allowing for easy swap-in

• Dimmable green LED backlighting




WARRANTY Three-year


Remote Sirens feature eight auxiliary buttons for one-touch programming and a three-position slide switch to allow convenient switching for the most frequently used warning modes. New switch panel graphics integrate

with the interiors of newly designed vehicles. Remote switch panel may be console mounted or attached with included universal bail bracket (amplifier can be mounted in a remote location such as the trunk)

73

SIRENS

Features• Compact siren has a small size and remote amplifier for tight spaces for undercover vehicles or motorcycles

• Class D Technology with high speed digital switching provides higher efficiency, less current draw and better reliability

• Operates a single 100 watt speaker or dual 58 watt speakers

• 5 popular warning tones (up to 3 tones can be activated): wail, yelp, piercer, hi-lo and super hi-lo, plus 4 additional air horn tones available

• Horn Ring (hands free operation) controls the tones and can be programmed to play warning or air horn tones. When driver presses the vehicle’s horn it will activate or de-activate the siren in programmed tone

• Volume programming capability on public address (PA) and radio rebroadcast sets the volume at a desired level during installation so when the driver selects either option, volume is automatically set

• Park/kill feature disables the siren when the vehicle is placed in park

• Built-in protection against over/under voltage, over temperature, short circuit and reverse polarity

• Hermetically sealed, providing protection in wet areas

#ETSA2ØØR

WATTS 100 Watt


DImENSIONS 5.4” (13.7 cm) L x 2.3” (5.8 cm) H x 4.6” (11.6 cm) D


WARRANTY Two-year


200 Series Compact Siren

molex Connector and mating Harness #ETSA2ØØRA

Delphi Connector and mating Harness #ETSA2ØØRW

74

SPEA

KERS

Features

100C Series Professional Speaker #ETSS1ØØC

Vehicle Specific Brackets (speaker sold separately)

Chevrolet Caprice, Driver Side ‘11 #ETSS1ØØBKCP-D Chevrolet Caprice, Passenger Side ‘11 #ETSS1ØØBKCP-P

Chevrolet Impala ‘06+ #ETSS1ØØBKPALA Chevrolet Tahoe ‘06 + #ETSS1ØØCBKTH Dodge Charger ‘11 #ETSS1ØØCBKDC11 Dodge Charger ‘06 - ‘10 #ETSS1ØØCBKDC Dodge Charger ‘06 - ‘10 #ETSS1ØØBKDC Ford PI Sedan Bumper mount ‘13 #ETSS1ØØCBKFS-BP Ford PI Utility Bumper mount ‘13 #ETSS1ØØCBKFV-BP

• Designed with clear, powerful output using Neodymium magnet

• Weatherproof and corrosion resistant cast aluminum housing

• Perfect for public address and other high intelligibility communication and signaling applications

• Includes universal bail bracket


• Dynamic sound for high intelligibility communication and signaling applications for emergency vehicles

• Tested rigorously for dust, high pressure water, corrosion and vibration

• Aluminum housing with a black powder coat finish resists corrosion


100H Series Professional Speaker #ETSS1ØØH


Chevrolet Caprice, Driver Side ‘11 #ETSS1ØØBKCP-D Chevrolet Caprice, Passenger Side ‘11 #ETSS1ØØBKCP-PChevrolet Tahoe ‘06 + #ETSS1ØØHBKTHDodge Charger ‘11 #ETSS1ØØCBKDC11Dodge Charger ‘06 - ‘10 #ETSS1ØØCBKDCFord Crown Vic Police Interceptor ‘05+ #ETSS1ØØHBKCVFord PI Sedan Bumper mount ‘13 #ETSS1ØØCBKFS-BPFord PI Utility Bumper mount ‘13 #ETSS1ØØCBKFV-BPFeatures

WATTS 100 Watt

DImENSIONS 6.625” (16.1925 cm) H x 6.75” (13.335 cm) W x 2.3125” (7.6 cm) D


WARRANTY Three-year


100 Series Professional Speakers

WATTS 100 Watt

DImENSIONS 5.80” (14.73 cm) H x 5.90” (15 cm) W x 2.77” (7.04) D


WARRANTY Three-year


75

100E Series Professional Speaker #ETSS1ØØE


Chevrolet Impala ‘06+ #ETSS1ØØBKPALADodge Charger ‘06+ #ETSS100CBKDC


• Deep sound with 100 watt power for high intelligibility and sound penetration

• Larger size for larger vehicles w/ a rugged and weatherproof construction

• Suitable for installation within engine compartments, front of the radiator or exterior mount on the bumper

Features

100D Series Professional Speaker #ETSS1ØØD


Chevrolet Caprice, Driver Side ‘11 #ETSS1ØØBKCP-DChevrolet Caprice, Passenger Side ‘11 #ETSS1ØØBKCP-PChevrolet Impala ‘06+ #ETSS1ØØDBKPALAChevrolet Tahoe ‘06+ #ETSS1ØØDBKCTDodge Charger ‘11 #ETSS1ØØCBKDC11Dodge Charger ‘06 - ‘10 #ETSS1ØØBKDCDodge Charger ‘06 - ‘10 #ETSS1ØØCBKDCFord PI Sedan and Utility Frame mount ‘13 #ETSS1ØØBKFD-FRFord PI Sedan Bumper mount ‘13 #ETSS1ØØCBKFS-BPFord PI Utility Bumper mount ‘13 #ETSS1ØØCBKFV-BP


• Rugged speaker has undergone and outperformed a series of grueling tests for dust, high and low temperature, water, salt and vibration - this long-lasting speaker will stand up to all kinds of environmental conditions

• Dynamic sound for high intelligibility communication and signaling applications for emergency vehicles

• Can be mounted horizontally or vertically and designed for narrow spaces

• Aluminum housing with a black powder coat finish resists corrosion


Features

100 Series Professional Speakers

WATTS 100 Watt

DImENSIONS 6.34” (6.1036 cm) H x 6.75” (17.145 cm) W x 2.96” (7.52 cm) D


WARRANTY Three-year


WATTS 100 Watt

DImENSIONS 5.5” (14 cm) H x 8” (20.32 cm) W x 7” (17.8 cm) D


WARRANTY Three-year


SPEAKERS

76

SPEA

KERS

Features

100L Series Professional Compact Speaker #ETSS1ØØL


Chevrolet Caprice, Driver Side ‘11 #ETSS1ØØBKCP-D

Chevrolet Caprice, Passenger Side ‘11 #ETSS1ØØBKCP-P

Chevrolet Impala ‘06+ #ETSS1ØØHPALA

Chevrolet Tahoe ‘06 and older #ETSS1ØØHBKTH

Dodge Charger ‘11 #ETSS1ØØCBKDC11

Dodge Charger ‘06 - ‘10 #ETSS1ØØCBKDC

Ford Crown Vic Police Interceptor ‘05+ #ETSS1ØØHBKCV

Ford Sedan and Utility ‘13 ETSS100BKFD-FR


• Compact design with powerful 100 watt output

• Dynamic sound for high intelligibility communication and signaling applications

• Slim, narrow design is easier to install in tight spaces in a variety of emergency vehicles

• Aluminum housing with black powder coat finish

• Tough and durable with high resistance to vibration and heat


WATTS 100 Watt

DImENSIONS 5.2” (13.21 cm) H x 6.4” (16.26 cm) W x 3” (7.62 cm) D

WARRANTY One-year


100 Series Professional Compact Speaker

77

SPEAKERS

420 Series Continuous Duty Speaker

Includes Vehicle Specific BracketsChevrolet Impala ‘06+ #ETSS4221B

Chevrolet Impala ‘05+ #ETSS42Ø2B

Chevrolet Tahoe and GmC Yukon ‘02+ #ETSS42Ø8B

Dodge Charger ‘06+ #ETSS422ØB

Ford Crown Vic ‘02+ #ETSS4214B

Ford Crown Vic ‘00+ #ETSS42Ø4B

Ford Excursion and F-250 ‘01+ #ETSS4219B

Ford Expedition ‘00-‘02 #ETSS42Ø7B

Universal “L” Bracket (short) #ETSS42Ø6B

Universal “L” Bracket (long) #ETSS42Ø1B

Universal Bail Bracket (shown) #ETSS42Ø9B

Features• Designed with clear, powerful output using Neodymium magnet

• made with the most reliable and cost efficient 100 watt compression driver on the market

• Finished in black powder coat baked on epoxy

• Compression driver is the lightest (56% less) and lowest profile (31% less) of the conventional alnico based compression drivers

• Perfect choice for tight fitting locations where space or weight is a premium consideration

• The 11 ohm, 2.75” high temperature voice coil is oven baked at a high temperature and sealed with a special coating to withstand extreme temperatures and environmental conditions. Voice coil is further protected with a special magnetic cooling liquid that fills the voice gap and provides a thermal path. Produces 10 - 15% more magnetic flux density in the voice coil gap

WATTS 100 Watt

DImENSIONS 5.25” (13.335 cm) H x 6.375” (16.1925 cm) W x 3” (7.6 cm) D


WARRANTY Three-year


78

ELEC

TRO

NIC

S

Switches ● Intelliswitch Professional 79 990 60 Amp Digital 79 993 Digital 79

● 600 Series 80

● 900 Series 80

● Directional Arrow 80

Headlight Flashers ● Chevrolet Models 81 Caprice 81 Impala 82 Tahoe 82

● Ford Models 83 Crown Victoria 83

● Select-a-Pattern Technology 85

Taillight Flasher 86

LED Light Flasher 87

Alt Alert Voltage Monitor 88

LED Modules ● Opticom™ Preemption 88

● Strobe Pulse 89

● Load 89

Ignition Security Systems ● Standard 90

● Heavy Duty 91

78

79

SWITC

HES

993 Digital Switch with Power Pursuit Buttons #ETSP993

INTELLIswitch993 model offers 11 programmable buttons: 9 total Ryno-Tuf push buttons (3 Power Pursuit buttons) with 2 hidden “discreet” membrane buttons located behind the SoundOff logo. You can configure the Power Pursuit buttons to operate any combination of the 6 remaining push buttons automatically, eliminating hours of tedious wiring. The 2 hidden membrane switches can be programmed for discreet functions of your choice such as timed gun lock.

990 60 Amp Digital Switch #ETSP99Ø INTELLIswitch990 model offers 6 Ryno-Tuf durable push buttons that are fully programmable with 60 amps maximum output. One push button can be set as an 8 second timed momentary if needed.

Features: 990 and 993 Intelliswitch • Models offer high speed action, low current draw and increased reliability with efficient digital technology. Switches can be console mounted if desired.

• Compact, slim design with self performing diagnostics at power-up to ensure optimum performance.

Professional Use


INPUT VOLTAGE 12 Vdc

CURRENT DRAW Intelliswitch990: 12 Amps maximum or Intelliswitch993: 60 Amps maximum

DIMENSIONS 6.5” (16.5 cm) L x 2.5” (6.4 cm) H x 2” (5.1 cm) D

MOUNTING 2-piece swivel style bracket included or can be console mounted

WARRANTY Five-year

TECHNICAL SPECIFICATIONS: 990 and 993 Intelliswitch

Both models feature Ryno-Tuf push buttons, 60 title legend sheets and optional bracket with mounting hardware.

80

SWIT

CH

ES

600 and 900 Series Switches

900 Series Function Switch #ETSP9F

9 functions: 3-position slide switch with 6 mini rocker

switches. Offers slide switch features 20 amps/output with

LED indicator on lights.

600 Series 6 Function Switch #ETSP6F 6 mini rocker switches with red LED indicator ON lights. Has a single 40 amp relay/circuit breaker with 5-20 amp fused switch output.

Features• 7 programmable warning modes with a fully illuminated display to show pattern activated and input selected

• Control multiple directional arrow products with 6-low current (0.25 amps) output

• Built-in Smart Sensor detects inputs from another switching source so it may be used with other manufacturers directional arrow products

• For use with LED lights only


DIMENSIONS 6.2“ (16 cm) W x 2.2” (5.6 cm) H x 5.2” (13 cm) D

WARRANTY One-year

TECHNICAL SPECIFICATIONS: 600 and 900 Series Switch

Features: 600 and 900 Series Switch • Includes switch box with universal bracket, mounting hardware, switch labels and 18” pigtail with insulated

quick connects for termination

Directional Arrow SwitchDirectional Arrow Switch #ETSWDASØ1


DIMENSIONS 6.5“ (17 cm) W x 3.5” (8.9 cm) H x 1.2” (3 cm) D

WARRANTY One-year


81

FLASH

ERS

Headlight Flashers: Chevrolet Models

• Easy installation with plug-in connectors for police package models

• Single flash pattern, PowerPulse

• Mounting bracket designed for easier installation in tight spaces

• Features high beam override to disengage flasher for normal high beam function

• Built-in shutdown protection against loss of ground and under voltage

• Durable and non-corrosive ABS plastic housing

• 100% Solid State, potted design for long-lasting, reliable performance

• 18” (46 cm) wire for power, ground and control

Caprice Headlight Flasher: Plug-in2011+ #ETHFSS-CP

Features

Q-Switch Cycles through 3 flash patterns:

1. Double flash alternating

2. Fast simultaneous

3. Pulse and fast alternating at 1.9 to 3.0 f.p.s., pattern repeats every 5.4 seconds

Cycle Flash Multi-pattern cycles through three double alternating and 2-simultaneous patterns

Double Flash Fast double flash alternating at 3.0 f.p.s.

ETM Fast simultaneous flash at 3.6 f.p.s.

Flashback® Alternates lower brake lights against reverse lights @ 2.6 f.p.s.

PowerPulse Fast alternating pattern at 3.0 f.p.s.

RoadRunner Slow alternating pattern at 1.9 f.p.s.

Single Flash Slow alternating flash pattern at 55 f.p.m.

Visit www.soundoffsignal.com, select sales then support/technical services for the vehicle compatibility chart.

Refer to the price guide for a list of additional flasher models.

Flash Pattern Overview

82

FLA

SHER

S

WATTS 2-110 Watt


DIMENSIONS 4.7“ (12 cm) L x 2” (5.1 cm) H x 0.7” (1.8 cm) D

MOUNTING 4” (10 cm) centers

WARRANTY Five-year

TECHNICAL SPECIFICATIONS: Caprice, Impala and Tahoe Flashers

Impala Headlight Flasher: Plug-in, Solid State2006+ #ETHIMPØ-Ø6+

Tahoe Headlight Flasher: Plug-in, Solid State2007+ #ETHTAHØ-Ø7+

Features• Easy installation with plug-in connectors for police package models


• Mounting bracket designed for easier installation in tight spaces

• Features high beam override to disengage flasher for normal high beam function

• Built-in shutdown protection against loss of ground and under voltage



• 8” (20 cm) wires

• Easy installation with plug-in connectors for police package models


• Features high beam override

• Built-in shutdown protection against loss of ground, short circuit, under voltage, brown out and transient protection


• 100% solid state, potted design for long-lasting, reliable performance

Features

83

FLASH

ERS

Crown Victoria Headlight Flasher: Plug-in, Solid State2006+ #ETHFSS-CV

Features • Easy installation with plug-in connectors for police package models

• Select-A-Pattern Technology with 7 user selectable flash patterns: PowerPulse, RoadRunner, ETM, Q-Switch, Cycle Flash, Single Flash or Double Flash

• Features high beam override and nighttime cutoff


• 18” (46 cm) wire for power, ground and control

Headlight Flashers: Ford Models

WATTS 2-110 Watt outputs



MOUNTING 4” (10 cm) centers

WARRANTY Five-year


Q-Switch Cycles through 3 flash patterns:

1. Double flash alternating

2. Fast simultaneous

3. Pulse and fast alternating at 1.9 to 3.0 f.p.s., pattern repeats every 5.4 seconds

Cycle Flash Multi-pattern cycles through three double alternating and 2-simultaneous patterns

Double Flash Fast double flash alternating at 3.0 f.p.s.

ETM Fast simultaneous flash at 3.6 f.p.s.

Flashback Alternates lower brake lights against reverse lights @ 2.6 f.p.s.

PowerPulse Fast alternating pattern at 3.0 f.p.s.

RoadRunner Slow alternating pattern at 1.9 f.p.s.

Single Flash Slow alternating flash pattern at 55 f.p.m.

Visit www.soundoffsignal.com, select sales then support/technical services for the vehicle compatibility chart.


Flash Pattern Overview

84

FLA

SHER

S

Crown Victoria Headlight Flasher: Plug-in, Solid State 25” Wire Leads 2006+ #ETHIFPØ-Ø6+

Features • Easy installation w/ plug-in connectors for police package models

• Select-A-Pattern Technology with 7 user selectable flash patterns: PowerPulse, RoadRunner, ETM, Q-Switch, Cycle Flash, Single Flash or Double Flash

• Features high beam override and nighttime cutoff

• Built-in shutdown protection against loss of ground, short circuit, under voltage, brown out and transient protection




DIMENSIONS 2.25“ (5.7 cm) W x 1.8” (4.6 cm) H x 0.7” (1.8 cm) D

MOUNTING 1.8” (4.6 cm) centers

WARRANTY Five-year


Crown Victoria Headlight Flasher:Plug-in, Relay or Solid State (DRL Compatible)

Solid State, 2006+ #ETHIFPSC-Ø6+ Relay, 2006+ #ETHIFPØC-Ø6+

Features • Easy installation with plug-in connectors for police package models

• 4 user selectable Flash Patterns: PowerPulse, RoadRunner, Q-Switch or ETM

• Designed for Canadian Crown Vics with factory integrated daytime running lights (DRLs)

• Flasher automatically deactivates DRLs when flasher is activated

• Features high beam override

• When used at night low beams remain on while high beams flash

• 8” (20 cm) wires WATTS 2-110 Watt outputs


DIMENSIONS 4.9“ (12 cm) L x 3.5” (8.9 cm) H x 1.2” (3.1 cm) D

MOUNTING 3” (7.6 cm) centers

WARRANTY Five-year: ETHIFPSC-Ø6+ One-year: ETHIFPØC-Ø6+


85

FLASH

ERS

Headlight Flasher: Solid State 18” wire leads #ETHFSS-SP Weather seal connector #ETHFSS-SPWS18” wire leads, single pattern #ETHFSS-CHPAMP connector #ETHFSS-SPA Heavy duty model (14 amp) #ETHDSS-SPAmp connector and Harness (14 amp) #ETHFSS-SPFL DRL compatible model (12v) #ETHFSS-SP-CMP

Isolation model (12v) #ETHFSS-SP-ISO

Features • Ideal for most “big 3” car models - designed for 2 to 4 headlight positive side switched headlight systems

• Great for motorcycles with positive side switched headlight systems

• Select-a-Pattern Technology w/ 7 user selectable flash patterns: PowerPulse, RoadRunner, ETM, Cycle Flash, Q-Switch, Single Flash or Double Flash Alternating


• 100% solid state output, potted design for long-lasting, reliable performance

• Positive switching

Headlight Flashers


2-150 Watt outputs: Heavy duty model (14 Amp) #ETHDSS-SP



MOUNTING 4” (10 cm) centers, 18” (46 cm) wires

WARRANTY Five-year


86

FLA

SHER

S

Taillight FlasherTaillight Flasher: Solid State Flashback® Alternating #ETFBSSN-PWith Fleet Harness #ETFBSANFL Features• 12 wire module with isolating diodes for the brake and reverse wire that are required for many new cars and trucks

• For use with vehicles that have the negative post of the battery connected to the chassis of the vehicle

• Provides an additional output for deck lights

• Alternating red and white light creates an effective rear warning signal to greatly reduce rear end collisions


• 18” (46 cm) wires

• Flash patterns: Flashback®



MOUNTING 4” (10 cm) centers, 18” (46 cm) wires

WARRANTY Five-year


Headlight Flasher: Solid State 18” wire leads #ETHFSS-SP Weather seal connector #ETHFSS-SPWS18” wire leads, single pattern #ETHFSS-CHPAMP connector #ETHFSS-SPA Heavy duty model (14 amp) #ETHDSS-SPAmp connector and Harness (14 amp) #ETHFSS-SPFL DRL compatible model (12v) #ETHFSS-SP-CMP

Isolation model (12v) #ETHFSS-SP-ISO

87

FLASH

ERS

Visit www.soundoffsignal.com, select sales then support/technical services for the vehicle compatibility chart .


LED Light Flasher Pattern Overview

ETM Fast Simultaneous flash pattern @ 3.6 f.p.s.

Inter-Cycle Cycles continuously through 2 - Quint patterns and 4 - WarpFlash patterns

PowerPulse Alternating (wig wag) flash pattern @ 3.0 f.p.s.

Quad Four consecutive flashes @ 235 f.p.m.

Quint Five consecutive flashes @ 140 f.p.m.

Q-Switch Cycles through 3 flash patterns: Double Flash Alternating, Fast Simultaneous Pulse and Fast

Alternating @ 1.9 to 3.0 f.p.s. - pattern repeats every 5.4 seconds

WarpFlash Alternating (wig wag) flash pattern @ 700 f.p.m.

LED Light Flasher2 Output with 8 Flash Pattern #ETFFCØ2LED

LED Light Flasher

• Synchronizes all LED warning lights - overrides all SoundOff Signal LED warning lights to take over pattern control

• 2 LED Flashers offer 8 user selectable flash patterns: Double, PowerPulse, Quint, ETM, Q-Switch, WarpFlash, Inter-Cycle and Quad


Features


DIMENSIONS 3.2“ (8.1 cm) L x 0.8” (2.0 cm) W x 0.8” (2.0 cm) D

MOUNTING On 2.8” (7.1 cm) centers, 12” (31 cm) wires

WARRANTY Five-year


88

ALT

ALE

RT V

OLT

AG

E M

ON

ITO

R A

ND

PRE

EMPT

ION

LED

MO

DU

LE

Alt Alert Voltage Monitor

• Designed to warn the vehicle operator if the electrical systems voltage range is out of its safe operating range; if the vehicle’s voltage fall below 11.80 volts for more than 7 seconds or if it exceeds 15.50 volts, Alt Alert will show an indicator light or a warning buzz

• Automatic Reset - resumes monitoring when electrical system returns to normal operating range

• 60 cycle pulse rated @ 1 amp maximum

Alt Alert Alternator Monitor Solid State with Deutsch Connector #EAAØØØ-P2


DIMENSIONS 3“ (7.6 cm) L x 1.5” (3.8 cm) W x 1” (2.5 cm) H

MOUNTING On 4” (10 cm) centers, 8” (20 cm) wires

WARRANTY Five-year


Features

Opticom™ Preemption LED ModulePreemption LED Module Infrared High Priority #EGTTE794H

• Provides emergency vehicle preemption to all intersections equipped with Opticom Infrared systems. Module generates a series of pulses in the infrared wavelength to allow preemption for emergency vehicles

• High efficiency LEDs require up to 90% less electrical power than conventional emitters, conserving power for other onboard emergency equipment. LED technology provides a higher level of consistent performance over the life of the emitter

• Built-in power supply simplifies installation

• Coded signal transmissions allow traffic officials to manage, track and control usage of the Opticom™ system and to block unauthorized vehicles from using it

Features


LIGHT SYNC Yes


CURRENT DRAW Less than Amp

OPERATING TEMPERATURE -30° F to -165° F / -34° C to +74° C

DIMENSIONS 4.5” (11.5 cm) W x 3.16” (8.0 cm) H x 2.23” (5.7 cm) D

CERTIFICATIONS SAE J575 and J455 certified

WARRANTY Five-year

Opticom™ is a registered trademark of Global Traffic Technologies, LLC.

89

LED M

OD

ULES

• Converts non self-contained LED warning lights into a “Strobe Pulse” flash effect

• Flashes any 12 volt LED light up to 3 amps


LED Load Module #ECVLDMDLØ1

LED Strobe Pulse Module #ETLEDFC1

LED Strobe Pulse and Load Module

Features


DIMENSIONS 3“ (7.6 cm) W x 1” (2.5 cm) H x 1.5” (3.8 cm) D

MOUNTING On 2.5” (6.4 cm) centers, 16” (41 cm) wires

WARRANTY One-year


Features• Solution for erratic flash patterns

• Adds 10 watt load across LED lamps restoring flash rate of mechanical, turn signal and hazard flashers



DIMENSIONS 3“ (7.6 cm) W x 2.43” (6.2 cm) H x 0.75” (1.9 cm) D

MOUNTING On 2.4” (6.1 cm) centers, 5.5” (14 cm) wires

WARRANTY One-year


90

IGN

ITIO

N S

ECU

RITY

SYS

TEM

S

Ignition Security System

• Easy to install and designed to be compatible with different vehicles

• Quick installation by use of quick connect “T-tap” connectors

• Connectors allow for quick replacement/removal of the ignition security system

• Allows the vehicle to stay running when the key is removed from the ignition switch

• Brake pedal and shift lever movement disables the ignition security system and stops the engine (sounds horn if connected)

• Over-ride simply deactivates by turning the key to the run position and depressing brake

• Automatic low voltage detection will activate the horn to provide notification of vehicle problems

• Additional universal output provides normally open or normally closed contact for starter disable, gun lock disable, camera record, etc.

• Includes illuminated remote switch

• Optional horn or siren alarm

Standard Model #ETISSO-Ø7+

Features


CURRENT DRAW 4-10 Amp outputs

DIMENSIONS 6“ (15 cm) L x 3.4” (8.6 cm) H x 0.8” (2.0 cm) D

MOUNTING Behind the dash and within the wire length of the steering column, on 5.6” (14 cm)

centers, 24” (61 cm) wires

WARRANTY One-year


91

IGN

ITION

SECU

RITY SYSTEMS

Ignition Security System


CURRENT DRAW 8 Outputs, 130 Amps total

DIMENSIONS 6“ (15 cm) L x 3.5” (8.9 cm) H x 1.5” (3.8 cm) D

MOUNTING Behind the dash and within the wire length of the steering column, on 5.6” (14 cm) centers, 16” (41 cm) wires

WARRANTY One-year


• Designed to be compatible with many different types of

vehicles including police package vehicles, trucks and buses

• For older heavy duty vehicles that require higher current

draw through the ignition switch

• Allows the vehicle to stay running when the key is removed

from the ignition switch

• Brake pedal and shift lever movement disables the ignition

security system and stops the engine (sounds horn

if connected)

• Over-ride simply deactivates by turning the key to the run

position and depressing brake

• Additional relay output provides normally open or normally

closed contact for starter disable, gun lock disable, camera

record, etc.

• Optional horn or siren alarm

Heavy Duty Model #ETISSO-Ø6+

Features

92

INTE

RIO

R LI

GH

TIN

G

Dome LED Interior ● Red and White Night 93

● Universal Dome 94

Strip LED Interior ● LED Strip 95

● LED 90° Corner Mount 95

● LED Flush Mount 95

92

93

DO

ME LED

INTERIO

R LIGH

TS

• Officer safety is our primary concern - we have designed an interior dome light with an optional red LED night light to reduce officer targeting - officer can see clearly inside and outside the vehicle when the red LED night light is turned on

• Available for police package vehicles with plug-in connector for quick and easy installation

• LED Dome Lights offer a low amp draw, superior efficiency and hours of long-lasting reliability

• Great lights for drivers working night shifts - red LED night light is gentle on the eyes reducing eye fatigue

Dome LED Interior LightsRed and White Night Lights

Features

Universal LED Dome Light (switch on outer lens)

Slimmer dome with an overall depth (height) of 0.9”

On/Off switch located on the outer lens

Chevrolet ImpalaLED White Dome 10-30v #ECVDMLTALIMP

Dodge ChargerLED White Dome 10-30v #ECVDMLTALDC

Incandescent, White Dome 10-16v #ECVDMLDC1

Dodge Magnum Incandescent, White Dome 10-16v #ECVDMLDC1

Ford Crown VictoriaLED White Dome 10-30v #ECVDMLTALCV

UniversalLED White Dome 10-16v #ECVDMLTALØØ

Universal LED Dome Light (switch on base)

Larger dome with an overall depth (height) of 1.5”

Brighter light with a greater number of LEDs

Chevrolet ImpalaIncandescent, White Dome 10-16v #ECVDMLTIMP

UniversalLED White Dome 10-16v #ECVDMLTØLMP

LED White Dome 10-16v #ECVDMLTØØ LED Clear Dome 10-16v #ECVDMLT2ALØØ

94

DO

ME

LED

INTE

RIO

R LI

GH

TS

CURRENT DRAW Switch outer lens: Less than 0.2 Amps for LED

Switch on base: 112-180 mA for LED, 740 mA for Incandescent

TECHNOLOGY Switch outer lens: 1 White LED and 8 Red LEDS Switch on base: 21 White LEDs and 12 Red LEDs

OPERATING TEMPERATURE -40° C to +65° C / -40° F to +65° F

DIMENSIONS Switch outer lens: 5.9” (15 cm) Diameter x 0.9” (2.3 cm) D

Switch on base: 6.2” (16 cm) Diameter x 1.5” (3.8 cm) D

MOUNTING Surface mount

WARRANTY Incandescent, one-year and LED, five-year


Features• Great for interior light for overhead lighting

• Includes 2-wire lead with 5” length/mounting screws for installation

Universal Dome LED Interior Lights

Universal Dome Light #ECVDMLTST2

Exclusive lens design disperses the maximum amount of light Easy on the electrical system Durable polycarbonate lens

Universal Dome Light #ECVDMLTST4

New LED for increased light intensity Easy on the electrical system Simple 2-wire electrical connection

CURRENT DRAW Universal Dome, LED: Less than 0.65 Amps Universal Dome, LED: Less than 0.45 Amps

DIMENSIONS Universal Dome, LED: 7” (17.78 cm) W x 3.25 (8.25 cm) H Universal Dome, LED: 6” (15.24 cm) W x 3” (7.62 cm) H

MOUNTING Surface mount

WARRANTY #ECVDMLTST2, five year and #ECVDMLTST4, one-year


95

STRIP LED IN

TERIOR LIG

HTS

Strip LED Interior Lights

Features• Light has a white steel base with a scratch resistant polycarbonate lens

• Specially engineered Fresnel lens to boost light output and brightness

• Includes 2-wire lead with a 18” length

Features• Specially engineered lens optic directs light away from viewer’s eye

• Glossy white powder coated aluminum housing with a polycarbonate lens

• Includes 2-wire lead with a 18” length and end/trim caps

VOLTAGE LED Strip Light: 10-16 Vdc or 10-30 Vdc

LED 90៓ Corner Mount Strip Light: 10-16 Vdc or 10-30 Vdc

LED Flush Mount Strip Lignt: 10-16 Vdc

CURRENT DRAW LED Strip Light: 0.4 Amps

LED 90៓ Corner Mount Strip Light: 0.4 Amps per 12” length

LED Flush Mount Strip Lignt: 0.4 Amps per 12” length

WARRANTY Five-year


LED Flush Mount Strip Light 10-16 Vdc12” Length #ECVCLLED1224” Length #ECVCLLED2436” Length #ECVCLLED3642” Length #ECVCLLED42

Features• Streamlined, low amp draw LED lighting

• Housing design allows for clean wire management behind light

• Easy installation - make a simple 2-wire electrical connection

• Glossy white powder coated aluminum housing with a polycarbonate lens

• Includes 2-wire lead with a 18” length

LED Strip Light 10-16 Vdc 10-30 Vdc #ETULT12W #ETULT12W-24

LED 90° Corner Mount Strip Light 10-16 Vdc 10-30 Vdc 10” Length #ECVCSLLED1Ø #ECVCSLLED10-3Ø21” Length #ECVCSLLED21 #ECVCSLLED21-3Ø32” Length #ECVCSLLED32 #ECVCSLLED32-3Ø43” Length #ECVCSLLED43 #ECVCSLLED43-3Ø

96

BEA

CO

NS

4800 Series LED ● Magnetic Mount 97

● Flat/Pipe Mount 97

4700 Series LED● Magnetic Mount 98






3000 Series Strobe● Magnetic Mount 101


96

97

BEAC

ON

S

BEACONS: 4800 Series LED

Features• Lens with UV inhibitor prevents sun fade

• Rated to last 20,000+ hours

• Heavy duty cast alumium base

• Same footprint as our 3000 and 4000 Series Beacons

Magnetic Mount 4” Dome Amber Lens #ELB48BML+AA 4” Dome Blue Lens #ELB48BML+BB 6” Dome Amber Lens #ELB48BMH+AA 6” Dome Blue Lens #ELB48BMH+BB

Flat/Pipe Mount 4” Dome Amber Lens #ELB48BCLØAA

4” Dome Blue Lens #ELB48BCLØBB 6” Dome Amber Lens #ELB48BCHØAA

6” Dome Blue Lens #ELB48BCHØBB

FLASH PAtteRnS 6 flash patterns

LeD COUnt 16 LeDs

InPUt VOLtAGe 10-30 Vdc

CURRent DRAW 1.5 amp @ 12 Vdc, 0.75 amps @ 24 Vdc

OPeRAtInG temPeRAtURe -40° C to 65° C

DImenSIOnS 4” Dome with base: 5” (12 cm) H

6” Dome with base: 6.8” (17 cm) H

6.3” (16 cm) base diameter

mOUntInG magnetic or Flat/Pipe mount

CeRtIFICAtIOnS eCe65 Class 1 certified and CA title 13, Article 22 compliant with Dust Cover Accessory

WARRAntY Five-year


accessories Branch Guard and Dust Cover (Beacon not included)

Dust Cover 6” Height #E36ØDC6

CA title 13,

Article 22 Compliant

Branch Guards (6” shown) 4” Height #PESB41BG4

6” Height #PESB41BG6

98

BEA

CO

NS

Features • 36 powerful LeDS provide 360 degrees of advanced optimal light distribution

• Waterproof IP67 and PC Lens to combat dust build-up

• Rugged polycarbonate base


Magnetic Mount 5” Dome Amber Lens #ELB47BML+A

Flat/Pipe Mount 5” Dome Amber Lens #ELB47BCLØA


LeD COUnt 36 LeDs


CURRent DRAW 13W average (low current)


DImenSIOnS 5” Dome with base: (12.7 cm) H, 7.37” (18.72 cm) base diameter


CeRtIFICAtIOnS SAe J845 Class 1 certified and eCe65 Class 1, tested and certified

WARRAntY three-year


99

BEAC

ON

S FLASH PAtteRnS 8 flash patterns

LeD COUnt 12 LeDs


CURRent DRAW 1 amp @ 12 Vdc, 0.5 amps @ 24 Vdc


DImenSIOnS 4” Dome with base: 5” (12 cm) H

6” Dome with base: 6.8” (17 cm) H

6.3” (16 cm) base diameter


CeRtIFICAtIOnS SAe J845 Class 1 certified and CA title 13, Article 22 compliant with Dust Cover Accessory

WARRAntY Five-year



#ELB(xx)B(x)(xx)(xx)

(xx) = CLASS 45 = Class 1

(x) = Mount C = Flat/Pipe

m = magnetic

(xx) = HeigHt Magnetic Mount L+ = Low, 4” Dome

H+ = High, 6” Dome

Flat/Pipe LØ = Low, 4” dome

HØ = High, 6” dome

(xx) = CoLor LED Color/Dome Color AA = Amber/Amber

AC = Amber/Clear

WA = White/Amber

BB = Blue/Blue

GG = Green/Green

RR = Red/Red

WC = White/Clear

J = Red/Blue Split (J in low dome only)

REPLACE (x) IN ORDER NUMBER FOR PERSONALIZED SELECTION



• Heavy duty cast alumium base

• Same footprint as our 3000 and 4000 Series Beacons



CA title 13,




100

BEA

CO

NS

Features • Synchronizing ability for up to 8 Beacons

• 12 extremely bright LeDs allow for advanced optimal light distribution

• Waterproof IP65

• Rugged polycarbonate base


LeD COUnt 12 LeDs


CURRent DRAW 2 amps maximum


DImenSIOnS 7” Dome with base: (17.78 cm) H, 7.37” (18.72 cm) base diameter

mOUntInG Flat/Pipe with 24” cable wire or magnetic mount

CeRtIFICAtIOnS SAe J845 Class 1 certified

WARRAntY three-year


Magnetic Mount 7” Dome Amber Lens #ELB44BMH+AA

Flat/Pipe Mount 7” Dome Amber Lens #ELB44BCHØAA


101

BEAC

ON

S



• Heavy duty cast aluminum base

• Advanced circuitry designed tolerate high vibration applications

Order No: 3 (xx)(x)(x)(x)(x)

(xx) = WAttS 1Ø = 10 Watt

2Ø = 20 Watt

(x) = FLASH 7 = Double and Quad

(x) = HeigHt L = Low, 4” Dome

H = High, 6” Dome

(x) = Mount C = Flat/Pipe

m = magnetic

(x) = CoLor A = Amber Lens

C = Clear Lens/White

REPLACE (x) IN ORDER NUMBER FOR PERSONALIZED SELECTION

BEACONS: 3000 Series Strobe

FLASH PAtteRnS 2 flash patterns - double or quad (user selectable)

teCHnOLOGY Xenon Helix Strobe tube


CURRent DRAW 10 watt: 1 amp @ 12 Vdc, 0.5 amp @ 24 Vdc or 20 watt: 2 amps @ 12 Vdc, 1 amp @ 24 Vdc


DImenSIOnS 4” Dome with base: 4.75” (12 cm) H or 6” Dome with base: 6.7” (17 cm) H x 6.3” (16 cm) base diameter

mOUntInG Permanent or magnetic mount (polycarbonate lens and black base)

CeRtIFICAtIOnS SAe J 1318 Class 2 certified and CA title 13, Article 22 compliant with Dust Cover Accessory

WARRAntY two-year (strobe tube, one-year)




CA title 13,




102

WO

RK A

REA

LIG

HTI

NG

Spot Lights ● PAR 46 103

● Mighty Night Light 113

Work Lights ● PAR 36 Lumen LED 104 500 and 1000 104 350, 500, 1000 or 1400 105

● 1400 Lumen LED 106 5” Rectangle 106

● 1000 Lumen LED 107 4” Square 107

● 900 and 500 Lumen LED 108 4.3” Square 108 4.6” Square 108

● 700 and 500 Lumen LED 109 3.3” Round 109 5.6” Oval 109

Scene Lights ● 4000 Lumen LED 110 5 Module 110

● 3000 Lumen LED 111 4 Module 111

● 2200 Lumen LED 112 3 Module 112

102

103

SPOT LIG

HTS

PAR46Unity® Spot Light Insert

TECHNICAL SPECIFICATIONS LED COUNT 9 LEDs


CURRENT DRAW 2.4 @ 12 V

OPERATING TEmPERATURE -40° C to +50° C / -40° F to +122° F

DImENsIONs 5.75 (14.8 cm) W x 3.3” (8.4 cm) D

CERTIFICATIONs sAE J575, 578 and 591 certified

WARRANTY Five-year

Features• Easy installation

• LED technology rated at 215,000 candlepower with up to 50,000 hours of lamp life

• 2° tightly controlled focus

• Hard-coated, polycarbonate lens that is break resistant, virtually indestructible

Spot Light InsertWhite #ESL461WC

THINKnew

104

WO

RK L

IGH

TS

Work LightsPAR36

1000 Lumen Work Light spot Pattern #EWLA1ØØØDBDSØWFlood Pattern #EWLA1ØØØDBDFØWTrapezoid Pattern #EWLA1ØØØDBDTØW

500 Lumen Work Lightspot Pattern #EWLAØ5ØØDBDSØWFlood Pattern #EWLAØ5ØØDBDFØWTrapezoid Pattern #EWLAØ5ØØDBDTØW

• Intense and bright, built for demanding environments

• Certified to IP67 specifications for rigorous dust and water immersion testing

• Rated to last 30,000+ hours for long-lasting and reliable, bright white light sources

• Low maintenance and reduced operating costs

• Adjustable mounting bracket with 180° of tilt forward or backward to aim the light as needed

Flood/Trapezoid LensSpot Lens

Features

ILLUmINATION PATTERNs Flood: 40˚ H x 25˚ V, Spot 10˚ or Trapezoid: 40˚ H. x 15˚ V

LED COUNT 6 LEDs

INPUT VOLTAGE 10-50 Vdc for worldwide use

CURRENT DRAW 1000 Lumen: 2 Amps @ 12.8 Vdc , 1.1 Amps @ 25.6 Vdc, 0.6 Amps @ 51.2 Vdc

500 Lumen: 1.3 Amps @ 12.8 Vdc, 0.6 Amps @ 25.6 Vdc, 0.3 Amps @ 51.2 Vdc

COLOR TEmPERATURE 5700k


DImENsIONs 4.5” (10 cm) W x 2.8” (6.4 cm) D Overall Height: 5.7” (14 cm) (includes bracket)

mOUNTING surface mount with U-bracket (included)

CERTIFICATIONs sAE DOT Lens marking

WARRANTY Three-year


105

WO

RK LIGH

TS

Work LightsPAR36


LED COUNTs 350: 3 LEDs, 500: 6 LEDs, 1000: 6 LEDs or 1400: 9 LEDs


CURRENT DRAW 350: 0.61 Amps, 500: 1 Amps, 1000: 1.66 Amps and 1400: 2.5 Amps @ 12.8 Vdc



DImENsIONs 4.5” (10 cm) W x 2.8” (6.4 cm) D Overall Height: 5.7” (14 cm) (includes bracket)



WARRANTY Three-year


Features • Protection against reverse polarity and load dump

• LEDs offer better energy efficiency - uses 75% less energy than sealed beams

• Visual clarity - crystal clear polycarbonate lenses with extremely bright, white LEDs illuminate the darkest work areas

• Lasts for years with 50 times the lifespan of sealed beam halogens and 10 times that of HID bulbs (30,000+ hours of use)

• Includes U-bracket with 20” wire length

Replace “(yyyy)” with desired lumen output:

Ø35Ø, Ø5ØØ, 1ØØØ or 14ØØ


LED Work Lights #EWLB(yyyy)DBD(x)ØW

Replace “(x)” with desired output pattern: S = spot, F = Flood or T = Trapezoid

106

WO

RK L

IGH

TS

Lumen LED Work Lights1400

5” Rectangle Lumen LED Work Lightsspot Pattern #EWLC14ØØTBDSØWFlood Pattern #EWLC14ØØTBDFØW Trapezoid Pattern #EWLC14ØØTBDTØW


Features • Corrosive resistant materials including high tech plastics, aluminum housing and stainless steel bracket

• Certified to IP67 specifications for rigorous dust and water immersion testing - heavy duty design withstands and outlasts harsh environmental conditions

• Premium optics maximize the LED light output

• Rated to last 30,000+ hours for a long-lasting and reliable, bright white light source to illuminate your work/play areas

• Adjustable mounting bracket with 180° tilt forward or backward to aim the light as needed


LED COUNT 10 LEDs


CURRENT DRAW 25.6 Vdc and 0.5 Amps @ 51.2 Vdc



DImENsIONs 5.2” (13 cm) W x 5.6” (14 cm) H x 2.6” (7 mm) D, x 5.5” (14 cm) H (includes bracket)

mOUNTING Adjustable mounting bracket (included)

CERTIFICATIONs ECE Reg. 10

WARRANTY Three-year


107

WO

RK LIGH

TS

Lumen LED Work Lights1000

ILLUmINATION PATTERNs Flood: 40˚ H x 25˚ V, Spot 10˚ or Trapezoid: 40˚ H x 15˚ V

LED COUNT 8 LEDs

INPUT VOLTAGE 10-50 Vdc for worldwide use

CURRENT DRAW 2 Amps @ 12.8 Vdc, 0.8 Amps @ 25.6 Vdc, 0.4 Amps @ 51.2 Vdc


OPERATING TEmPERATURE -40° C to +65°C / -40° F to +149° F

DImENsIONs 4” (10 cm) W x 5.5” (14 cm) H x 2.7” (7 mm) D (includes bracket)



WARRANTY Three-year


Features • Corrosive resistant materials including high tech plastics, aluminum housing and stainless steel bracket

• Certified to IP67 specifications for rigorous dust and water immersion testing - heavy duty design

• Premium optics maximize the LED output

• Rated to last 30,000+ hours for a long-lasting and reliable, bright white light source to illuminate your work/play areas

• Adjustable mounting bracket with 180° tilt forward or backward to aim the light as needed

4” Square Lumen LED Work Lightsspot Pattern #EWLC1ØØØSBDSØWFlood Pattern #EWLC1ØØØSBDFØW Trapezoid Pattern #EWLC1ØØØSBDTØW

Spot Lens Flood/Trapezoid Lens

108

WO

RK L

IGH

TS

Lumen LED Work Lights900 and 50 0

4.6” Square 900 Lumen LED Work Light#EWLFØ9ØØSBDFØW

4.3” Square 500 Lumen LED Work Light#EWLFØ5ØØSBDFØW

Features • Die cast aluminum housing with a black powder coat finish

• PC vacuum coated reflector is weatherproof and intensifies light output

• Offered in a wide flood pattern

• Low current draw and efficient heat dispersion

• Prewired double insulated cable

• Reverse polarity protected

• Heavy duty stainless steel adjustable mounting bracket included (not shown on square light photos above)

ILLUmINATION PATTERNs Flood pattern

LED COUNT 900 Lumen: 9 LEDs or 500 Lumen: 5 LEDs


CURRENT DRAW 900 Lumen: 2.25 Amps @ 12 Vdc, 1.13 Amps @ 24 Vdc 500 Lumen: 1.25 Amps @ 12 Vdc, 0.63 Amps @ 24 Vdc



DImENsIONs 900 Lumen: 4.6” (12 cm) W x 1.9” (4.9 cm) D, Height: 5” (13 cm) 500 Lumen: 4.3” (11 cm) W x 1.6” (4.1 cm) D, Height: 5” (13 cm) (includes bracket on all)


WARRANTY One-year


109

WO

RK LIGH

TS

Lumen LED Work Lights700 and 50 0


LED COUNT 700 Lumen: 8 LEDs or 500 Lumen: 4 LEDs


CURRENT DRAW 700 Lumen: 2 Amps @ 12 Vdc, 1 Amp @ 24 Vdc 500 Lumen: 1 Amp @ 12 Vdc, 0.5 Amp @ 24 Vdc


OPERATING TEmPERATURE -40° to +65° C / -40° to +149° F

DImENsIONs 700 Lumen: 5.6” (14 cm) D x 2.5” (6.4 cm) Depth, Overall Height: 4.7” (12 cm) 500 Lumen: 3.3” (8 cm) D x 2.5” (6.4 cm) Depth, Overall Height: 4.4” (11 cm) (includes bracket on all)



WARRANTY Three-year


3.3” Round 500 Lumen LED Work Light#EWLFØ5ØØDBDFØW


• PC vacuum coated reflector is weatherproof and intensifies light output

• Offered in a wide flood pattern


• Prewired double insulated cable

• Reverse polarity protected

• Heavy duty stainless steel adjustable mounting bracket included

5.6” Oval 700 Lumen LED Work Light#EWLFØ7ØØDBDFØW

110

SCEN

E LI

GH

TS

Lumen LED Scene Light4000

4000 Lumen, 5 Module LED Scene Light#EWLS4ØØØTBDFØW


• PC vacuum coated reflector is weather proof and intensifies light output




LED COUNT 30 LEDs


CURRENT DRAW 60 Watts


OPERATING TEmPERATURE -40° C to +65° C / -40° C to +149° F

DImENsIONs 17.5” (45 cm) L x 6” (16 cm) H x 3.5” (9 cm) D (includes bracket)

mOUNTING surface mounting with U-bracket (included)


WARRANTY Three-year


111

SCEN

E LIGH

TS

Lumen LED Scene Light3000





3000 Lumen, 4 Module LED Scene Light #EWLS3ØØØTBDFØW


LED COUNT 24 LEDs








WARRANTY Three-year


112

SCEN

E LI

GH

TS

Lumen LED Scene Light220 0





2200 Lumen, 3 Module LED Scene Light#EWLS22ØØTBDFØW


LED COUNT 18 LEDs








WARRANTY Three-year


113

SPOT LIG

HTS

Lumen Spot Lights

45° Flood Lens Lumen Spot Light#EAUSSMBØFWC

Standard Lens Lumen Spot Light#EAUSSMBØSWC

15° Forward Facing Lens Lumen Spot Light#EAUSSMBØAWC

Features • High powered white LED spot light with a compact size that allows you to use it anywhere you have restricted space such as push bumpers or around the license plate

• Powerful and bright 400 lumen output

• Can be mounted vertically or horizontally

FLAsH PATTERN steady burn only

LED COUNT 1 LED

CURRENT DRAW 0.45 Amps to 0.65 @ 12.8 Vdc


DImENsIONs 2.8” (7.1 cm) L x 4.1” (1.0 cm) H x 1.3” (3.3 cm) D

mOUNTING surface mount on 3.5” (8.9 cm) centers

WARRANTY Three-year


SMARTLY DESIGNED LIGHTING AND ELECTRONIC SOLUTIONS.

SUPERIOR CUSTOMER RELATIONSHIPS.

If you need additional information in regards to SoundOff Signal® products, visit us at

www.soundoffsignal.com

or contact your sales representative toll free at 1.800.338.7337 or direct at 616.896.7100.

Specifications and availability are subject to change without notice.

SoundOff Signal® is an ISO-9001 Company.

PO Box 206Hudsonville, MI 49426

toll free: 1.800.338.7337office direct: 616.896.7100

order fax: 616.896.1286

www.soundoffsignal.com

© 2014 SoundOff SignalPrinted in the USA

All Rights Reserved

Documents

SoundOff Signal Catalog