Upload
malay-k-ghosh
View
505
Download
4
Embed Size (px)
Citation preview
NO SUFFIX DATE SUPP/CORR DESCRIPTION
1 -01 2011/01 -- 1st Issue
MODELKDL-22EX420KDL-22EX423KDL-26EX420KDL-26EX423KDL-32EX420KDL-32EX520KDL-32EX523
SEGMENT: P-1PART NO. : 9-888-126-01
MODELKDL-40EX520KDL-40EX523KDL-46EX520KDL-46EX523
MODEL COMMANDER DEST MODEL COMMANDER DEST
SEGMENT: P-1
KDL-22EX420 RM-GD020, CD013 Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, India, Thailand, Malaysia, South Africa, Taiwan, Hong Kong.
KDL-22EX423 RM-GD020 Saudi Arabia, Nigeria
KDL-26EX420 RM-GD020, CD013 Taiwan, Hong Kong, Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, India, Thailand, Malaysia, South Africa, Australia, Saudi Arabia, Nigeria
KDL-26EX423 RM-GD020 Saudi Arabia, Nigeria
KDL-32EX420 RM-GD020 Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, India, Thailand, Malaysia, Australia, New Zealand
KDL-32EX520 RM-GD020, CD013 Taiwan, Hong Kong, Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, India, Thailand, Malaysia, South Africa, Australia, New Zealand, Saudi Arabia, Nigeria
KDL-32EX523 RM-GD020 Iran, Saudi Arabia, Nigeria
KDL-40EX520 RM-GD020, CD013 Taiwan, Hong Kong, Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, India, Thailand, Malaysia, South Africa, Australia, New Zealand, Saudi Arabia, Nigeria.
KDL-40EX523 RM-GD020 Iran, Saudi Arabia, Nigeria
KDL-46EX520 RM-GD020, CD013 Taiwan, Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, India, Thailand, Malaysia, South Africa, Australia, New Zealand, Saudi Arabia, Nigeria.
KDL-46EX523 RM-GD020 Iran, Saudi Arabia, Nigeria
TABLE OF CONTENTS
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Section Title Page1. SAFETY NOTES
1-1. Caution Handling of LCD Panel ........................……………..…...................... 31-2. Safety Check Out ......................................…………...………….......................... 31-3. Leakage Test ......................................................................................................... 31-4. How to find a good earth ground ......................................………… 4
Section Title Page5. DIAGRAMS
5-1. Bl ock Diagram ……………............................................................................... 565-2. W ire Dressing
5-2-1. KDL-22EX420, 22EX423 ................................................................................. 605-2-2. K DL-26EX420, 26EX423 ................................................................................. 61g g
1-5. WARNING and Caution ....................................................................................... 41-6. Lead Free Information ......................................................................................... 41-7. Information regarding Bezel and Panel………………………………………… 6
2. SELF DIAGNOSTIC FUNCTION 2-1. Overview of Control Buttons ……………............................................................ 162 2 LED Display Specification 16
,5-2-3. KDL-32EX420, 32EX520, 32EX523 ............................................................... 625-2-4. K DL-40EX520, 40EX523………………………………………….................. 635-2-5. K DL-46EX520, 46EX523………………………………………...................... 64
5-3. Conne ctor Diagram …………………………………………………………… 655-4. Circuit Board Location
5-4-1. KDL-22EX420, 22EX423 ................................................................................. 685-4-2 KDL-26EX420 26EX423 682-2. LED Display Specification ................................................................................... 16
2-3. LED Display Control ............................................................................................. 162-4. LED Pattern ............................................................................................................ 172-5. Standby LED Error Display ................................................................................. 172-6. Triage Chart ........................................................................................................... 18
3. TROUBLE SHOOTING
5-4-2. KDL-26EX420, 26EX423 ................................................................................. 685-4-3. KDL-32EX420, 32EX520, 32EX523 ............................................................... 685-4-4. K DL-40EX520, 40EX523………………………………………….................. 685-4-5. K DL-46EX520, 46EX523………………………………………...................... 68
6. DISASSEMBLY, EXPLODED VIEWS AND OTHER PARTS 6-1. KDL-22EX420, 22EX423 ................................................................................. 696 2 KDL 26EX420 26EX423 733-1. Power Problem …………..................................................................................... 19
3-2. Standby Led Blinking ........................................................................................... 193-3. Power (Green) LED Blinking............................................................................... 273-4. No Picture …………………………………………………….............................. 283-5. No Sound ………………………………………………………………………… 303-6. TV Commander and Keys Malfunction ........................................................ 303-7. Network Malfunction……………………………………...................................... 33
6-2. KDL-26EX420, 26EX423 ................................................................................. 736-3. KDL-32EX420, 32EX520, 32EX523 ............................................................... 766-4. K DL-40EX520, 40EX523……………………………………………………… 796-5. K DL-46EX520, 46EX523………………………………………….................. 826-6. O ther Parts .....................................................……………………….............… 85
OPERATING INSTRUCTIONS 3 7. Network Malfunction……………………………………...................................... 333-8. Camera Malfunction ……………………………………………………… 353-9. 3D Malfunction…………………………………………………………………… 363-10. HDD-Rec Malfunction …………………………………………………………… 373-11. Skype Trouble Shooting Flow ……………………………………………………383-12. Trouble Shooting Reference …………………………………………………… 40
4 SERVICE ADJUSTMENTS4. SERVICE ADJUSTMENTS 4-1. Accessing Self Diagnostic Menu …………....................................................... 464-2. Accessing Service Mode ..................................................................................... 474-3. Transition of Each Module in Service Mode …………..................................... 474-4. Change Data by Service Mode 1 ……………………………………………… 484-5. Change Data by Service Mode 2 ……………………………………………… 494-6. White Balance Adjustment ……………………………………………………… 504-7. Restore White Balance /Gamma Adj-data to B Board ……………………… 514-8. Change the Emitter Output Level ……………………………………………… 514-9. Viewing VCOM Test Pattern ………………………………………………524-10. How to do Shipping Condition ………………………………………………… 534-11. Remote Commander Function………………………………………………… 534-12 Index Flow of Service Control 544-12. Index Flow of Service Control …………………………………………………… 54
3
1-1. Caution Handling of LCD PanelWhen repairing the LCD Panel, make sure you are grounded with a wrist band.When repairing the LCD Panel on the wall, the panel must be secured using the 4 mounting holes on the rear cover.1) Do not press the panel or frame edge to avoid the risk of electric shock.2) Do not scratch or press on the panel with any sharp objects.3) Do not leave the module in high temperature or in areas of high humidity for
an extended period of time.4) Do not expose the LCD panel to direct sunlight.5) Avoid contact with water. It may cause short circuit within the module.6) Disconnect the AC power when replacing the backlight (CCFL) or
inverter circuit. (High voltage occurs at the inverter circuit at 650Vrms)7) Always clean the LCD panel with a soft cloth material.8) Use care when handling the wires or connectors of the inverter circuit.
Damaging the wires may cause a short circuit.9) Protect the panel from ESD to avoid damaging the electronic circuit
(C-MOS).10) During the repair, DO NOT leave the Power On or Burn-in period for more than
1 hour while the TV is face down on a cloth.
1-2. Safety Check-OutAfter correcting the original service problem, perform the following safety checks before releasing the set to the customer:-1) Check the area of your repair for unsoldered or poorly soldered connections.
Check the entire board surface for solder splashes and bridges.2) Check the interboard wiring to ensure that no wires are pinched or contact
high-wattage resistors.
SAFETY NOTESSECTION 1
3)Check all control knobs, shields, covers, ground straps and mounting hardware have been replaced. Be absolutely certain you have replaced all the insulators.
4) Look for unauthorized replacement parts, particularly transistors that were installed during a previous repair. Point them out to the customer and recommend their replacement.
5) Look for parts which, though functioning show obvious signs of deterioration. Point them out to the customer and recommend their replacement.
6) Check the line cords for cracks and abrasion. Recommend the replacement of any such line cord to the customer.
7) Check the antenna terminals, metal trim, metallized knobs, screws and all other exposed metal parts for AC leakage. Check leakage test as described next.
8. For safety reasons, repairing the Power board and/or Inverter board is prohibited.
1-3. Leakage TestThe AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis must not exceed 0.5mA (500 microamperes).Leakage current can be measured by any one of the three methods:-1. A commercial leakage tester such as the SIMPSON 229 or RCA WT-540A.
Follow the manufacturers instructions to use those instructions.2. A battery-operated AC milliampmeter. The DATA PRECISION 245 digital
multimeter is suitable for this job.3. Measuring the voltage drop across a resistor by means of a VOM or battery
operated AC voltmeter. The 'limit' indication is 0.75V so analog meters must have an accurate low voltage scale. The SIMPSON'S 250 and SANWA SH-63TRD are examples of passive VOMs that are suitable. Nearly all battery operated digital multimeters that have a 2 VAC range are suitable. (see Figure 1.)
Figure 2. AC voltmeter to check AC leakage
3
Figure 1. TV is face down on a cloth during reparing
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Safety Notes
4
1-4. How to Find a Good Earth GroundA cold-water pipe is a guaranteed earth ground; the cover-plate retaining screw on most AC outlet boxes is also at earth ground.If the retaining screw is to be used as your earth ground, verify that it is at ground by measuring the resistance between it and a cold-water pipe with an ohmmeter. The reading should be zero ohms.If a cold-water pipe is not accessible, connect a 60- to 100-watt trouble- light (not a neon lamp) between the hot side of the receptacle and the retaining screw. Try both slots, if necessary, to locate the hot side on the line; the lamp should light at normal brilliance if the screw is at ground potential (see Figure B).
Figure 3. Checking for earth ground.
1-5. Warnings and Cautiona) These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
b) An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is directly connected to the ac power line.
c) Be sure to follow these guidelines to protect your property and avoid causing serious injury.• Carry the TV with an adequate number of people; larger size TVs require
two or more people.• Correct hand placement while carrying the TV is very important for safety
and to avoid damages.d) Components identified by shading and ! mark on the schematic diagrams,
exploded views, and in the parts list are critical for safe operation. Replace these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that are critical for safe operation are identified in this manual. Follow these procedures whenever critical components are replaced or improper operation is suspected.
1-6. Lead Free InformationThe circuit boards used in these models have been processed using Lead Free Solder. The boards are identified by the LF logo located close to the board designation.
Figure 2: LF Logo
Figure 3: LF logo on circuit board
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Safety Notes
The servicing of these boards requires special precautions. It is strongly recommended to use Lead Free Solder material in order to guarantee optimal quality of new solder joints. Lead Free Solder is available under the following part numbers:-
Due to high melting point of Lead Free Solder, the soldering iron tiptemperature needs to be set to 370 degrees centigrade. This requiressoldering equipment capable of accurate temperature control coupledwith a good heat recovery characteristics.For more information on the use of Lead Free Solder,please refer to http://www.sony-training.com
Part Number Diameter Remarks
7-640-005-19 0.3mm 0.25Kg
7-640-005-20 0.4mm 0.50Kg
7-640-005-21 0.5mm 0.50Kg
7-640-005-22 0.6mm 0.25Kg
7-640-005-23 0.8mm 1.00Kg
7-640-005-24 1.0mm 1.00Kg
7-640-005-25 1.2mm 1.00Kg
7-640-005-26 1.6mm 1.00Kg
5
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
2. Peel off double sided tape
To peel off double sided tape between bezel assembly and panel, push bezel down and pull panel up. Prohibited pushing panel from front side for prevention break panel.
(1)Hook off LED board to be easy peel off
(2)Put hand into between bezel and Panel from side, pull panel up and push down bezel like picture.
Should pull up
metal area, should not cell area.
(3)Moving hand peeling by peeling to pull up and push down near the tape.
Moving hands
step by step
1-7-1. Notice when LCD panel peel off from bezel assembly
Peel off double sided tapes between bezel assembly and LCD panel when exchanging LCD panel, etc, allow below instruction.
1. Put off “Bracket, Panel”
Put off “Bracket, Panel” with pushing bezel hook. The position shows on following pages.
Pushing hook
Put off
1-7. Information regarding Bezel and Panel
Safety Notes
6
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
1-7-2. Exchange double sided tapes
Because double sided tape’s strength weaken when tapes once peeled off, peel off all tapes from bezel assembly, and stick new ones.
1. Peel off double sided tapes from bezel.
(Possibly remain on panel side)2. Stick double sided tapes
Double sided tapes32~46”Name: DOUBLE SIDED TAPE (PANEL) P/N: 4-272-200-01Vendor: Chiyoda integre55”, 60”Name: DOUBLE SIDED TAPE (PANEL 10)P/N: 4-281-014-01Vendor: Chiyoda integre
Stick double sided tapes as shown in following pages. Peel off separate papers before panel puts on.
Safety Notes
7
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
While pay attention to double sided tapes, put panel on to bezel assembly as below.
(1)Put from upper side adjusting position to L/R side)
(2) Down panel on to bottom caring about fitting bezel position ribs and panel cutout area.
(1)Put on upper side(2)Put down
Care about positioning rib (L&R)
1. Putting Panel on to bezel
2. Putting on “Bracket, panel”
Put brackets and confirm fixed by hook.
Position of BRACKET, PANEL show on following page.
1-7-3. Putting Panel on to Bezel
Safety Notes
8
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Peel off double sided tapes between bezel assembly and LCD panel when exchanging LCD panel, etc, allow below instruction.
2. Peel off double sided tape
To peel off double sided tape between bezel assembly and panel, push bezel down and pull panel up.Prohibited pushing panel from front side for prevention break panel.
1. Release hooks of Bezel
(2)Moving hand peeling by peeling
to pull up and push down near the tape.
Please release hooks of top and side. And install a cushion to avoid hooks restored.
Top
Side (L &R)
Cushion
(1)Pull Panel up and push down Bezel
like picture.
1-7-4. Notice when LCD panel peel off from bezel assembly
Safety Notes
9
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Because double sided tape’s strength weaken when tapes once peeled off,peel off all tapes from bezel assembly, and stick new ones.
1. Peel off double sided tapes from Panel. (Possibly remain on Bezel side) 2. Stick double sided tapes
Double sided tapes
22”,24”,26"
Name: DOUBLE SIDED TAPE (PANEL)
P/N: 4-272-200-01
Vendor: Chiyoda integre
Stick double sided tapes as shown in following pages.
Peel off separate papers before panel puts on.
1-7-5. Exchange double sided tapes
Safety Notes
10
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
While pay attention to double sided tapes, put panel on to bezel assembly as below.
(1)Put from upper side adjusting position to L/R side)
(2) Down panel on to bottom caring about fitting bezel position ribs and panel cutout area.
1. Putting Panel on to bezel 2. Lock with hooks of Bezel
Please lock Panel with hooks of Bezel.
Position of Hooks show on following page.
1-7-6. Putting Panel on to Bezel
Safety Notes
11
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Double sided tapes on bezel assembly (ornament) for panel is attached as below
22 inch
1position
DOUBLE SIDED TAPE (PANEL)
5x440mm t=0.4
24 inch
2position
DOUBLE SIDED TAPE (PANEL)
5x240mm t=0.4
26 inch
2position
DOUBLE SIDED TAPE (PANEL)
5x240mm t=0.4
1-7-7. Location of double sided tape for each inches
32”32 inch
2position
DOUBLE SIDED TAPE (PANEL)
5x290mm t=0.4
40” 40 inch
2position
DOUBLE SIDED TAPE (PANEL)
5x380mm t=0.4
37”37 inch
2position
DOUBLE SIDED TAPE (PANEL)
5x350mm t=0.4
46”46 inch
3position
DOUBLE SIDED TAPE (PANEL)
5x290mm t=0.4
55”55 inch
3position
DOUBLE SIDED TAPE (PANEL 10)
10x350mm t=0.4
60”60 inch
3position
DOUBLE SIDED TAPE (PANEL 10)
10x385mm t=0.4
Not applicable for this booklet
Not applicable for this booklet
Not applicable for this booklet Not applicable for this booklet
Safety Notes
12
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
22”
24”
26”
1-7-8. Location of PANEL Hook
Not applicable for this manual
Safety Notes
13
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
32” 40”
37” 46”
BRACKET, PANEL on bezel assembly for panel is put in as below
BRACKET, PANEL (H) 2position
BRACKET, PANEL (C) 3position
BRACKET, PANEL (H) 2position
BRACKET, PANEL (C) 4position
BRACKET, PANEL (H) 2position
BRACKET, PANEL (C) 4position
BRACKET, PANEL (H) 2position
BRACKET, PANEL (C) 6position
1-7-9. Location of BRACKET, PANEL
Not applicable for this booklet
Safety Notes
14
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
55”
60”
BRACKET, PANEL (M) 15position
BRACKET, PANEL (M) 15position
BRACKET, PANEL (M)
BRACKET, PANEL (C)
BRACKET, PANEL (H)
Not applicable for this manual
Not applicable for this manual
Safety Notes
15
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
1-7-9. Location of BRACKET, PANEL
2-1. Overview of Control Buttons
SECTION 2SELF DIAGNOSTIC FUNCTION
1
2
3
4
5
Power
Program
Volume
Input Select/
Home
Enter
6 7 8 9RemoteSensor
PictureTimer
Off/StandbyIndicator
PowerIndicator
16
StatusPic off /
Connecting / Timer
Standby Pow er/REC Blinking Pattern
POWER ON Off Off Green
Standby (by Remote Control Off) Off Red Lit Off
Self Diagnosis Off Red Blink OffRefer to Blinking Pattern of Self Diagnosis Mode
End of the Aging Mode Off Off Green Blink 3sec On / 3sec Off
Aging Mode Off Off Green Blink 0.5sec On / 0.5sec Off
Softw are Updating Orange Blink Red Lit Off 5sec On / 1sec Off
Softw are Update Finish Orange Lit Off Green Lit
Test Reset Orange Lit Red Lit Green Lit
Error on Panel ID Orange Blink Off Green Blink 0.5sec On / 0.5sec Off
(REC)(Sleep Timer)(Pow er ON)
Orange Off Red
(Picture Off) (On Timer) (REC) (Pow er On)
Green Off Red
LED Type Description Remark
POWER Green: LED Red : LED
Green lights at Pow er On. Red lights w hen recording (Japan and Europe models only)
STANDBY Red:One LED Red lights during standby
Timer/ Pic Off Orange/Green:Tw o LEDs
Green Lights during Picture Off and Orange Lights during Timer Activation.
2-2. LED Display Specification
2-3. LED Display Control
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
2-5. Standby LED Error Display
Self Diagnostic Function
Blinking Times Error Countermeasure to replaced either / all
2 Main Power Error
Panel ID NVM Error
6 Backlight Error
7 Temperature Error
8 Software Error
9 Reserved Reserved
10 Emitter Board Power Error
Not applicable for this manual
5
4
3 Main Board / DC Alert Error / Audio Error
Balancer Error / MM SPI Error / VLED Error Not applicable for this manuall
Tcon Error / HFR Error / FRC No Not applicable for this manuall
Power Supply BoardMain Board
Main Board
Power Supply Board Main Board Panel
Main Board Wif i (Not applicable for this manual)
Main Board
TconPanel Module
17
2-4. LED Pattern
When safety shutdown occurs, Standby LED display reports the cause by using the lighting patterns as indicated below.
Example:The figure above shows LED display when SHUTDOWN is caused by Balancer Error. It repeats flashing for a specified number of times in 0.5sec/cycle and has a 3 seconds interval of lighting off. Please note that a 3 second interval of lighting off is fixed regardless of abnormal state types.
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
2-6. Triage Chart
Self Diagnostic Function
Segment Size B* Board Type
G* Board Type
H* BoardType
P-1 22 BAT-S G1A HLR2
P-1 26 BAT-S G1B HLR2
P-1 32 BAT-V GE2A HLR2
P-1 40 BAT-V GE3A HLR2
P-1 46 BAT-V GE3A HLR2
18
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Green LED Blinking
NoPower Remote Network Audio Skype
2 3 4 5 6 7 8 10
Green LED non-stop Blinking
No Green Power LED (Dead Set)
Stationary colored lines or
dots
No video One of Inputs
No video all Inputs No Remote
Wirelesscan't connect No Audio
Skype Can't Work
B* BOARD ▲ l ▲ ▲ ▲ l l ▲ ▲ ▲ l l ▲ ▲ l ▲G* BOARD l ▲ ▲ ▲ l ▲ l ▲H* BOARD(IR) ▲ l lRF Module(RF) lSPEAKER ▲ lSkype Module lWifi Module l l ▲LD B OARD** l ▲LVDS CABLE ▲ ▲ ▲ ▲TCON l ▲LCD Panel l l ▲ l l
POWER POWER POWERPANEL(TCON)
PANEL(Backlight) TEMP EMIT-TER
AUDIOFAN(N/A)
* Not applicable for this manual
Doubtful Part
Few Possibility
Reference
Symptoms - Shutdown. Power LEDblinking red diagnostics sequences
Video - missing or distorted
Problem
** *
*
**
Skype
No Power
Check STBY 3.3Vat 10 pin of CN6001
on the B* Board
Harness
G* BoardReplace the Harness
Between G* Board andB* Board
Turn on the Switch
B* Board
Check*Power Saving Switch
NG
OK
NG
SW OFF
SW ON
*Power Saving Switch:Only for BAT-L model
(2b-1,2b-2,3a-1)
2-times blinking
Check REG12V atpins 2/3 of CN6001 on
the B* Board
B* Board
Harness
G* BoardReplace the Harness
Between G* Board andB* Board
NO 12V
12V OK
NG
SECTION 3TROUBLESHOOTING
3-1. Power Problem
Symptom improvement
Symptom improvement
Segment Size B* Board Type G* Board Type
P-1
22 BAT-S G1A
26 BAT-S G1B
32 BAT-V GE2A
40 BAT-V GE3A
46 BAT-V GE3A
Note: B* and G* Board
3-2-1. 2-times blinking (Main Power Error)3-2. Standby LED Blinking
19
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Trouble Shooting
3-times blinking
Check D+1.2V atJL6007
on the B* Board
F6001,IC6005,etc(B* Board)
Speaker
Check +3.3V_MAINat JL9234 onthe B* Board
CheckSpeaker Impedance
at SP Connector
F6003,IC6003,etc(B* Board)
Check AUDIO+12.5V at pin 8/9 of
CN6001 onthe B* Board
G* Board
Check +12.5Vat F4601 onthe B* Board
F4601,IC4601,etc(B* Board)
IC4601,etc(B* Board)
DC_ALERT
NG
OK
NG
OK
AUDIO
AUDIO
NG
OK
NG
OK
NG
OK
Segment Size B* Board Type G* Board Type
P-1 22 BAT-S G1A
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A
Note: B* and G* Board
3-2-2. 3-times blinking( DC Alert & Audio Error)
20
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
3-2-3. 4-times blinking (LED Error)(Not applicable for this manual)
21
4-times blinking
CheckPANEL_FAIL at
JL6017on the B* Board
Panel
B* Board
Between 0.84V to 2.65V
Change G* Board G* Board
Below 0.84V
Symptom improvement
NG
Change LED Driver Board LED Driver Board
Symptom improvement
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
3-2-4. 4-times blinking (Including SPI Error) (Not applicable for this manual)
22
4-times blinking
CheckPANEL_FAIL at
JL6017on the B* Board
Panel
B* Board
Between 0.84V to 2.65V
Change G* Board G* Board
Below 0.84V
Symptom improvement
NG
Change LED Driver Board LED Driver Board
Symptom improvement
Check the harness betweenthe T-con board and the LED driver board,
between the G board and the LED driver board.
Harness
NG
Change T-CON Board T-con Board
NG
Symptom improvement
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
5-times blinking
Check PANEL_VCCat pin 1 of
CN6001 onon the B* Board
G* Board
Replace the Harness Between G* and Panel (a)
Replacethe LVDS Harness
RGB sensor change RGB sensor
Harness
LVDS Harness
about 5V : 22 Modelabout 12V : ex. 22 Model
(a) exclude 60Hz Panel Model
NG
OK
System Improvement
NG
NG
Symptom improvement
Symptom improvement
3-2-5. 5-times blinking (T-con Error) (Not applicable for this manual)
23
Panel (T-con)change B* Board
Panel (T-con)
NG
Symptom improvement
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
(b) Only for Y* models
6-times blinking
CheckBL_ERR at
pin 7 of CN6002on the B* Board
B* Board
under 2.65V
G* board
NG
Over 2.65V
Change G* Board
Panel
Symptom improvement
Segment Size B* Board Type G* Board Type
P-1 22 BAT-S G1A
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A
Note: B* and G* Board
3-2-6. 6-times blinking (Backlight Error)
24
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
6-times blinking
Check the harness betweenthe T-con board and the LED driver board.
Harness
Change G* board G* Board
NG
Change LED driverboard LED Driver Board
NGCheck FFC connection betweenthe LED driver board and
the light source (inside the panel module)
FFC Connection
NG
NG
OK
OK
(Not applicable for this manual)
Symptom improvement
Symptom improvement
3-2-7. 6-times blinking( Backlight Error)
25
Light Source(Inside Panel Module)
Change B*board B* Board
Symptom improvement
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
7-times blinking
B* Board
Yes
PanelNGChange B* Board,and Aging a few hours
Setting Circumstance Is OK? Temperature,
Ventilation, etc.
Set to anotherlocation, etc.
No
Symptomimprovement
Segment Size B* Board Type
P-1 22 BAT-S
P-1 26 BAT-S
P-1 32 BAT-V
P-1 40 BAT-V
P-1 46 BAT-V
Note: B* Board
3-2-8. 7-times blinking (Temperature Error) 3-2-9. 8-times blinking (Software Error) (Not applicable for this manual)
26
8-times blinking
WIFI Module
If the Symptom Improved by changing
the WIFI moduleB* Board
NG
Symptom improvement
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
10-times blinking
HEM2 Board
OK
T-CON boardNG
Change HEM2 Board
Checkthe harness betweenthe T-con board and
the HEM2 boardharness
NG
Symptomimprovement
3-2-10. 10-times blinking (Emitter error) (Not applicable for this manual)
27
POWER (Green) blinking
OK
PanelNG
Check Panel
Check
the harness between
the G* board and
Panel
harnessNG
OK
Check G* board
B* Board
OK
G* BoardNG
3-3-1. Non-Stop blinking (Power (Green) LED)
Segment Size B* Board Type G* Board Type
P-1 22 BAT-S G1A
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A
Note: B* and G* Board
3-3. Power (Green) LED Blinking
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
No Picture
Press HOME Key.XMB(Menu)
displayed?
B* Board
No
Yes
Replacethe LVDS Harness
LCD Panel(T-con)
Harness(LVDS)
NGCheckBL_ON at JL6018
on the B* Board
BL_ON:H
B* Board
Replace Harness(Between G* Board
to B* Board)
Harness(G* to B*)
NG
BL_ON:L
Change B* Board) G* BoardNG
CheckPANEL_VCC
at JL6004on the B* Board
No
G* Board
Yes
Symptomimprovement
Symptomimprovement
Symptomimprovement
Segment Size B* Board Type G* Board Type
P-1 22 BAT-S G1A
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A
Note: B* and G* Board
3-4. No Picture3-4-1. Except HFR Model
28
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
about 5V : 22”(WXGA)Model
about 12V : ex : 22”(WXGA)Model
Segment Size B* Board Type G* Board Type
P-1 22 BAT-S G1A
P-1 26 BAT-S G1B
P-1 32 BAT-V GE2A
P-1 40 BAT-V GE3A
P-1 46 BAT-V GE3A
3-4-2. HFR Model
29
No Picture
Press HOME Key.OSD displayed?
B* Board
No
Yes
Replacethe B-Tcon, Tcon-LD**
FFC
B-Tcon, Tcon-LD**FFC
NG
B* Board
Check the G*- LD**Harness
Harness
NG
Change B* BoardOK NG
G* Board
LCD Panel(T-con, LD**)Change G* Board
NG
Symptom improvement
Symptom improvement
Symptom improvement
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Tcon-LD** - not applicable for this this model
Note: B* and G* Board
3-5. No Sound 3-6. TV Commander & Keys Malfunction
No Sound
Change the SpeakerHarness
Speaker Harness
Replacethe B* Board B* Board
Speaker
NG
NG
Check the Speakers setting
Change to TV Speaker
Audio System
TV Speakers
Symptom improvement
Symptom improvement
Segment Size B* Board Type
P-1 22 BAT-S
P-1 26 BAT-S
P-1 32 BAT-V
P-1 40 BAT-V
P-1 46 BAT-V
Note: B* Board
3-6-1. TV key Malfunction
30
Button malfunctionon the TV
Replace the harnessbetween B*
to Switch UnitSwitch Unit
Harness
Switch Unit change
B* Board
NG
NG
Symptom improvement
Symptom improvement
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
TV isn’t controlledby remote commander
OK
NG
Green LED lightat power indicator
Check the Harnessbetween the B* Board
and the HLR Board
Exchange Harness Harness
NG
NG
Green LED blinks at power indicatorwhen using commander
near sensor’s window
OK
NG
OKSensor is broken
B* board
NG
Exchange HLR board HLR board
Mechanical(ex. bezel)
Symptom improvement
Symptom improvement
Segment Size B* Board Type
P-1
22 BAT-S
26 BAT-S
32 BAT-V
40 BAT-V
46 BAT-V
Note: B* Board
3-6-2. IR Remote Commander Malfunction
31
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
3-6-3. RF Remote Commander Malfunction (Not applicable for this manual)
Commandermalfunction
B* board
RF Module
Re-Pairing action
RF remote commander isUn-registered
Replacethe RF Module
NG NG
NG
Use new remote and new batteries
Remote
Replace the Harnessbetween the B* Board
and the RF Module
Harness
Use new batteries
Batteries low power
NG
Symptom improvement Symptom improvement Symptom improvement
NG
Symptom improvement
Symptom improvement
Note: B* Board
32
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
3-7. Network Malfunction
Wired Networkon the TV
Ethernet Cable
Connection resultCable Connection
Proxy setting
OK Connection resultLocal Access
Connection resultInternet Access
NG
OK
NG NG
Wired Set-upIP address setting
Auto Check Local router
DHCP server
Manual
Check IP address&
Local router setting
Check cable B* boardOK
NG
Segment Size B* Board Type
P-1 22 BAT-S
P-1 26 BAT-S
P-1 32 BAT-V
P-1 40 BAT-V
P-1 46 BAT-V
Note: B* Board
3-7-1. Wired Network Malfunction
33
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
3-7-2. Wireless Network Malfunction
Wireless Networkon the TV
Is the radio field Strength too weakor even No signal?
Access Point
B* Board
Error Message appear when the Wireless Network
is selected?
Wireless Module, Harness
Wireless Networkon the TV
Is the radio field Strength too weakor even No signal?
Access Point
B* BoardError Message appear
when the Wireless Network is selected?
USB Dongle
No
Yes
NoNo
YesYes
No
Yes
3-7-2-1. Internal Wireless Network Malfunction 3-7-2-2. USB Wireless Network Malfunction
34
Segment Size B* Board Type
P-1 22 BAT-S
P-1 26 BAT-S
P-1 32 BAT-V
P-1 40 BAT-V
P-1 46 BAT-V
Note: B* Board
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
3-8. Camera Malfunction
Enter Presence sensor
settings
Error Message appearwhen the Presences
Sensor setting?
Module, Harness
No
Yes
Is image is clear onsetting menu
at module unit only?
Yes
Mechanical Problem
No Module optical problem(change module)
Error message
Presence Sensor Setting:
Press HOME, then select > System Settings > Eco > Presence Sensor
image
Setting Menu
35
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
3D malfunction
HEM2 Board
No
No
NG
Yes
Change Watching environment
Panel (T-con)
[How to confirm IR-output.]
ex) Look IR-LED through CCD/CMOS camera.
IR has been outputon HEM2 board,
during 3D displaying.
Replace HEM2 board
Check whether there is interception thing between Emitter
and glasses.
No
YesYes Is 3D glasses power on?
Power on or
Charge battery
3D glasses
Symptom improvement
3-9. 3D Malfunction (not applicable for this manual)
36
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
3-10. HDD-Rec MALFUNCTION
HDD RecMalfunction
B board
HDD is connectedto the appropriate
USB port?
Connect to theappropriate port
No
Yes
USB Hub is insertedin between the
USB port and HDD?
USB Hub isNOT supported
Yes
No Is the drive size largerthan 32GB and
Smaller than 2TB??
Only 32GB~2TBis supported
No
Yes
All the setups and restrictions listed in
iManual are cleared?Check the iManual
No
Yes
37
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Problem!
USB plugged?
Able to run Skype App?
Insert USBNO
YES
Do you have CMU-BR100? Buy CMU-BR100
NO
Is it Skype ready TV? Buy ready TV
NO
YES
YES
NO
YES
Continue to next page
3-11. Skype Trouble Shooting Flow
38
Change USB port.
YES
Repair BAT PWB
Able to run Skype App?
NO
YES
Able to run Skype App?
NO
-Unplug other USB device.
-AC Off/On
Spec. USB overload.
NO
YES
Works?
Insert other CMU-BR100 or USB dongle.
CMU-BR100 is NG.Swap to new one.
Repair BAT PWB
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Network connected?
NODo network setup
Far end PIC/AUD quality?
YES
Far end setting/system.
NO
YES
Network speed.Or Far end system
issue.
Auto-Focus doesn’t work?
NO
YES
Manual Focus work?
NO
SPEC. Focus area.
CMU-BR100 is NG.Swap to new one.
YES
Sound quality?No video?
No video
Sound quality?
Call Skype sound test.
NG
OK
Yes
Enough NET speed?
Test again.
Move unit away from speaker.
NGCMU-BR100
is NG.
Continue from previous page
3-11. Skype Trouble Shooting Flow (continue from previous page)
39
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
PartsLocation
Parts PWB Drawing Parts Location
CN6001i) Pin 1ii) Pin 2iii) Pin 3iv) Pin 8v) Pin 9vi) Pin 10
CN6002i) Pin 7
F6001
F6003
IC6003
3-12. Troubleshooting Reference3-12-1. BAT-S ( A Side) (22, 26EX420, 22, 26EX423)
A
Note: Refer to each Troubleshooting
for details information.
Pin 1Pin 2Pin 3
Pin 8
Pin 9
Pin 10
B Pin 7
BAT-S < A Side>
CN6001
CN6002
D
C
F6001
F6003
E IC6003
BAT-S
A
ED
B
A
C
40
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
PartsLocation
Parts PWB Drawing Parts Location
IC6005
*JL6004
JL6007
*JL6017(nearF4601)
*JL6018(nearF4601)
*JL9234(nearCN9003)
C
D
E
F
G
H
3-12-2. BAT-S ( B Side) (22, 26EX420, 22, 26EX423)
A
PartsLocation
Parts PWB Drawing Parts Location
F4601
IC4601
BBAT-S
< B Side>
A
B
c
F4601
IC4601
C
BB
AT-
S
c
JL6004 IC6005 JL6007
DE
JL6018
JL6017
FG
JL9234
CN9003
H
Note: Parts marked (*) Refer to 3-11-3 for ( Alternative Location) information .
41
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Parts PWB Side Alternative Location PWB Side PWB Drawing Parts Location
JL6004 B Side CN6001Pin 1 :
T-CON_VCC
A Side
JL6017 B Side CN6002Pin 7 : BL_ERR
A Side
JL6018 B Side CN6002Pin 6 :BL_ON
A Side
3-12-3. BAT-S ( Alternative Location) (22, 26EX420, 22, 26EX423)
Pin 1 : Alternative location
for JL6004
CN6001
CN6002
Pin 7 :
Alternative location
for JL6017
Pin 6 :
Alternative location
for JL6018
42
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
PartsLocation
Parts PWB Drawing Parts Location
CN6002i) Pin 7
F4601
Pin 7
CA
DE
F
B
PartsLocation
Parts PWB Drawing Parts Location
CN6001i) Pin 1ii) Pin 2iii) Pin 3iv) Pin 8v) Pin 9vi) Pin 10
F6001
IC6003
F6003
3-12. Troubleshooting Reference3-12-4. BAT-V ( A Side) (32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523)
C
Note: Refer to each Troubleshooting for details information.
Pin 1Pin 2
Pin 3
Pin 8
Pin 10
A
BAT-V < A Side>
E
D
Pin 9
F6001
F
IC6003
F6003
CN6001
CN6002
CN5006
F4601
B
43
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
PartsLocation
Parts PWB Drawing Parts Location
IC6005
*JL6004
JL6007
PartsLocation
Parts PWB Drawing Parts Location
IC4601
B
C
3-12-5. BAT-V ( B Side) (32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523)
A
BAT-V
< B Side>
A
B
D
Note: Parts marked (*) Refer to 3-11-3 for ( Alternative Location) information
IC4601 IC4601
IC6005
C
JL6004
JL6004
D
IC6005
JL6007
E F
G
44
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
PartsLocation
Parts PWB Drawing Parts Location
*JL6017
*JL6018
*JL9234(nearCN9003)
3-12-5. BAT-V ( B Side) (continue from previous page)(32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523)
Note: Parts marked (*) Refer to 3-11-7 for ( Alternative Location) information
JL6017
E
FJL6018
G
CN9003
JL9234 JL9234
Parts PWBSide
Alternative Location
PWBSide
PWB Drawing Parts Location
JL6004 B Side
CN6001Pin 1 : T-CON_VCC
ASide
JL6017 BSide
CN6002Pin 7 : BL_ERR
A Side
JL6018 BSide
CN6002Pin 6 :BL_ON
ASide
3-12-6. BAT-V ( Alternative Location) (32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523)
CN6001
Pin 1 :
Pin 6 :
Alternative
location
for JL6018
CN6002Pin 7 :
Alternative
location
for JL6017
45
Trouble Shooting KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Diagnosis Menu Sample
Remote Commander
SELF CHECK <1> NEXT PAGE->
000 RGB_SEN
002 MAIN_POWER
003 DC_ALERT
003 AUD_PROT
003 DTT_WDT
004 BALANCER
005 HFR_ERR
005 TCON_ERR
005 P_ID_ERR
006 BACKLITE
007 TEMP_ERR
007 FAN_ERR
010 EMITTER
011 RESERVED
012 1A
101 VPC-WDT
102 MEPS-WDT
103 HOST_WDT
12345-67891-23456
1. While LCD TV set is on standby mode, press the following sequence on the Remote Commander key. (RM-GD020)< i+> <5> <Vol Down> <TV Power>
SECTION 4SERVICE ADJUSTMENT
(i+ )
5
Vol Down
TV Power
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
Indicating error
detected.
3. To Reset Panel Operation Time (Applicable Only when Panel is replaced):
Remote Commander Diagnosis Menu Sample
SELF CHECK <1> NEXT PAGE->
000 RGB_SEN
002 MAIN_POWER
003 DC_ALERT
003 AUD_PROT
003 DTT_WDT
004 BALANCER
005 HFR_ERR
005 TCON_ERR
005 P_ID_ERR
006 BACKLITE
007 TEMP_ERR
007 FAN_ERR
010 RESERVED
011 RESERVED
12345-67891-23456
Panel OperationTime
7
0
4-1. Accessing Self Diagnostic Menu
00
00
00
00
00
00
00
00
00
00
00
00
00
00
2.To Reset Error Count & Error History: Press < 8 > < 0 > key 4.To exit, turn the power off using Remote Commander key.
Press < 7 > < 0 > key
46
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
4-2. Accessing Service Mode
While LCD TV set is on standby mode, press the following sequence on the Remote Commander key. < Display> <5> <Vol Up> <Power>
Remote Commander
i+
5
Vol Up
TV Power
2. Digital Service Mode will be appeared first whenever entering Service Mode.3. To changed the module, please press either OPTION or JUMP key on the
remote commander.
4-3. Transition of each module in service mode
Remote Commander
Jump
Options
1. There are 3 modules in Service Mode:a) Chassisb) VPCc) Digital
Service Mode 1
Service Mode 2
DIGITAL SERVICE
001 OP
000 VERS ---
<MAIN> <EXT>
DM1.301W00AA RF:01.05
WF1.003W00AA WF:2.0.0.99
DF1.001W00AA WF:0B
YM1.010W00AA CAM:X.XXX
DB2.105W00AA FD:XXXX
(DM1.301W00AA)
DD1.016W00AA
WP0.521W00AA <PEM>
MID:1C117081 PM1.012W00LU
PID:04020000 PB1.000W00LU
PNL:LTY320AB01 PL1.011J46LUX
POP:X.XXX PD1.011J46LUX
Service Menu SampleFor Main CPU
Host CPU main program version
VPC FW version
Vendor FW version
Standby CPU program version
Boot program version
MP release Host program version
NVM Data version
Pack Data version
Model ID
Product ID
Panel ID (Title)
Additional modulesRF module program version
Data version of Wifi module (Country code)
Fennel Core Flash Data version
Panel MicroMain program version
Boot program version
Boot Loader version
NVM Data version
000-255 (1Byte) version data is for Fennel core.
FW version of Wifi module
47
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
1. To change category, item and data in CHASSIS or VPC service mode:a. Press key 2 or 5 on remote commander to select (up or down) category.b. Press key 1 or 4 on remote commander to select (up or down) Item.c. Press key 3 or 6 on remote commander to change(up or down) data.
Remote commander key : 1, 2, 3 is for incrementRemote commander key : 4, 5, 6 is for decrement
4-4. Change data by Service Mode 1 (Chassis and VPC module)
CHASSIS SERVICE000 WYVERN000 S2_NOISE_TH 32
Changing categoryChanging Item
Changing data
CHASSIS Service Menu Sample
Remote Commander
a
b c
2. To save changed data in Service Mode 1a. Press key Mute on remote commander. It shows green SERVICE changes
to green WRITE.b. Press key 0. Green WRITE changes to red WRITE. It indicate writing is
processing.c. After a while, red WRITE changes to green SERVICE. Writing process is
done at this point.
CHASSIS WRITE000 WYVERN000 S2_NOISE_TH 32
CHASSIS Service Menu Sample
Remote Commander
3. TV reboot is necessary for applying data change.
ab
(a)(b)
(c)
Indicate saving process
48
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
To change category, item and data in DIGITAL service mode (except 003DIG_SRV_MODE category):
a. Press key 2 or 5 on remote commander to select (up or down) category.b. Press key 1 or 4 on remote commander to select (up or down) Item.c. Press key 3 or 6 to change (up or down) data.
Remote commander key : 1, 2, 3 is for incrementRemote commander key : 4, 5, 6 is for decrement
DIGITAL SERVICE
004 TUNER
000 !A_NOSIG_DET 001
DIGITAL Service menu sample
No need to save for Digital Service Mode (except for 002 MODEL & 005 CHPRESET category)
6
Remote Commander
ab c
4-5. Change data by Service Mode 2 (Digital Service Mode)4-5-1. Change data for all Except 003 DIG_SRV_MODE
To change item and data in DIGITAL service mode (003 DIG_SRV_MODEcategory):Please note because this operation is special.
a. Press key 2 or 5 on remote commander to select 003 DIG_SRV_MODE.b. Press key 1 or 4 on remote commander to select (up or down) Item.c. Press key 0 or 10 on remote commander to select item.d. Press key 1~9 on remote commander directly. Star (*) mark will move
accordingly.e. Press key ENTER or SELECT to decide and advance next step.
Press Remote Commander key RETURN to return to the previous page.
DIGITAL SERVICE
003 DIG_SRV_MODE
000 TEST_PATTERN ---
DIGITAL Service menu sample
DIGITAL(DIG_SRV_MODE) SERVICE
TEST_PATTERN
*1 Video
2 Audio
Remote Commander
d
ce
e
4-5-2. Change data for 003 DIG_SRV_MODE
49
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
4-5-3. Save changing data by Service Mode 2 (for 002 MODEL category)
DIGITAL SERVICE
002 MODEL
000 SEG I-1
Write
DIGITAL Service menu
Remote Commander
b
a
3. To change category, item and data :a. Press key 2 or 5 on remote commander to select (up or down) category.b. Press key 1 or 4 on remote commander to select (up or down) Item.c. Press key 3 or 6 on remote commander to change (up or down) data.Remote commander key : 1, 2, 3 is for incrementRemote commander key : 4, 5, 6 is for decrement
4. Press key mute +0 on remote commander . It shows red WRITE. 5. After a while, red WRITE dissapears. Green DONE will be displayed.
1. This is only required only when B Board is replaced.2. Items in Digital service mode for 002 MODEL category.
000 SEG ・・・Select segment information001 DEST・・・Select destination information002 MODELNAME ・・・ Select Model Name003 SERIAL ・・・Can be set Only Once for the new board
To access to White Balance Service mode, choose VPC Service Mode. a. Press key 1 or 4 on remote commander to select WB adjustment menu.
006 WB category will be seen on the menu.b. Change data by pressing 3 or 6. Each range of these items is 0~255.c. Press mute + 0 on remote commander to save the data.
SERVICE comment is changed to WRITE, indicating writing process.d. After a while, WRITE comment returns to SERVICE, which means
writing process is done. (takes about a couple of seconds)
Remote Commander
VPC SERVICE
006 WB
000 R_DRV 128
VPC Service menu sample
VPC SERVICE
006 WB
001 G_DRV 128
VPC SERVICE
006 WB
002 B_DRV 128
VPC SERVICE
006 WB
003 R_BKG 128
VPC SERVICE
006 WB
004 G_BKG 128
VPC SERVICE
006 WB
005 B_BKG 128
a
c
b
4-6. White Balance Adjustment
50
7. Please save the item SEG, DEST, MODELNAME sequentially. SEG→ DEST→ MODELNAME
8. When Saving the item "SEG", sometimes instead of "Writing", word "Pending" will appear. In this case, skip the "SEG", save the "DEST" and "MODELNAME" is OK.
6. For the item SEG, DEST MODELNAME, after changing each item, service save(mute+0) is needed. For the item SERIAL, after inputting the serial number, press key 12 or Enter, the serial data will be saved.
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
In VPC service mode:a. Select 000 DATA_COPY category by pressing key 2 or 5 on remote
commander.b. Change data from 0 to 1 by pressing key 3 or 6 on remote commander.c. Wait until data is changed from 1 to 3.d. When data is changed from 1 to 3, restoring process is finished.e. In case data is changed from 1 to 2, keep default setting.
(No more process is needed.)
End restore process menu sample
VPC SERVICE
000 DATA_COPY
000 BU_TRANS 3
DATA TRANSFER SUCCESS
Restore process menu sample
VPC SERVICE
000 DATA_COPY
000 BU_TRANS 1
DO NOT POWER OFF
DO NOT TOUCH ANY KEY NOW
4-7. Restore WB / Gamma adj-data to B board.
Remote Commander
a
b
Notes:1. This restoration should be applied after USB-DL being assembled when
B Board is replaced.2. This process only applicable for 120Hz / 240Hz models only.
4-8. Change the emitter output level (Applicable only for TD model).
Remote Commander
a
b c
1. Purpose to reduce the emitter LED output power strength.2. Select VPC service mode and then press:
a. Select 005 TD category by pressing key 2 or 5 on remote commander.b. Select 000 EMIT_STR item by pressing key 1 or 4 on remote commander.c. Change data from 0 to 1 by pressing key 3 or 6 on remote commander.
0: Strong (Default)1: Weak
d. Save by pressing Mute & 0 or 10 & Reboot.
VPC SERVICE
005 TD
000 EMIT_STR 1
Sub Service menu
d
51
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
DIGITAL (DIG_SRV_MODE) SERVICE
TEST PATTERN--> 1 Video
*1 White2 Ramp3 R Raster4 G Raster5 B Raster6 Color Bar7 VCOM Pattern1
8 VCOM Pattern29 Off
Please input a white level.(00-10)_ _
To access VCOM Step 1, please select Digital Service Mode firsta. Select 003 DIG_SRV_MODE category by pressing key 2 or 5 on remote
commander.b. Press key 0 on remote commander to go to TEST PATTERN Mode.c. Press key Enter or 1 or 2 on remote commmander to go into Video TEST
PATTERN.d. Press key 7 or 8 on remote commander to select the test pattern e. Press key Enter or Select on remote commander twice to show the VCOM
TEST PATTERN.
4-9. Viewing VCOM Test Pattern4-9-1. Step 1
VCOM Test Pattern Step 1 menu sample
PQP SERVICE
002 VCOM000 ENABLE 0
a. Select 002 VCOM category by pressing key 2 or 5 on remote commander.b. Select 000 ENABLE item by pressing key 1 or 4 on remote commander.c. Change ENABLE from 0 to 1 to enable VCOM adjustment.
4-9-2. Step 2To access VCOM Step 2, please select VPCService Mode first
VCOM Test Pattern Step 2 menu sample
PQP SERVICE
002 VCOM
001 ADJUST 0
To access VCOM Step 3, please select VPC Service Mode.a. Select 002 VCOM category by pressing key 2 or 5 on remote commander.b. Select 001 ADJUST item by pressing key 1 or 4 on remote commander.c. Change data by pressing key 3 or 6 on remote commander.d. Finish the adjustment when the picture seems OK.
DIGITAL SERVICE
010 VCOM000 SRV_OSD_EN 1
To access VCOM Step 4, please select Digital Service .a. Select 007 VCOM category by pressing key 2 or 5 on remote commander.b. Change data from 1 to 0 by pressing key 3 or 6 on remote commander.c. Confirm the final result of the VCOM adjustment .d. If OK, Finish the VCOM adjustment. If NG, pressing key 3 or 6 to show
the OSD again and go back to VCOM adjustment STEP3
4-9-3. Step 3
4-9-4. Step 4
VCOM Test Pattern Step 3 menu sample
VCOM Test Pattern Step 4 menu sample
52
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
a. Move to Digital service mode.b. Press 8 on remote.
It shows green color letter SERVICE changes to green colorletter RST-.
c. Press mute on remote.Added green color letter EXE after green color letter RST- .
d. Press 0 on remote. Green color letter RST-EXE changes to red color letter RST-EXE. It indicated writing is in process.
e. After a while, red color letter RST –EXE changes to greencolor letter SERVICE. And all LED lights.Writing process is done at this point.
TIMER Standby POWER
Without accessing to Service Mode, shipping condition still can be set by pressing remote commander key:
-> Cursor Up on remote + Power Key on Front panel
c d
Remote Commander
b
4-10. Set to Shipping Condition4-10-1. Option 1 (By Accessing to Service Mode)
4-10-2. Option 2 (Without accessing to Service Mode)
Function The flow of control
Service mode on <Test>+<TV>/<Display><5><Vol Up><Power>
Service mode off <Other> / <Power off + on>
Item up / down <1>/<4>
Category up / down <2>/<5>
Data up / down <3>/<6>
Test reset <8> + <Mute> + <0>
Execute <10 or 0>
Write data <Mute> + <0>
Change module <Jump> / <Option>
4-11. Remote Commander Function
53
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
001 OP000 VERS…………………….Software version
002 MODEL000 SEG ……………………..Select segment information001 DEST…………………….Select destination information002 MODELNAME …………..Select Model Name004 SERIAL ………………….Can be set Only Once for the new board
003 DIG_SRV_MODE000 TEST_PATTERN……….EMMA Test Pattern001 MONITOR_MODE………Tuner Monitor002 FACT_SETTING………..Factory shipment settings<omission>
004 TUNER000 A_NOSIG_DET………….Analog-RF No signal detection001 SCAN_COPY……………Copy the scan data to USB.<omission>
005 CHPRSET…………………………For factory use only.<omission>
006 RFRC Mode……………………. Service item for RF Remote Commander<omission>
007 VCOM…………………………… Service item for VCOM Adjustment<omission>
008 WIFI …………………………….…Service item for WIFI (only WIFI model)<omission>
4-12. Index Flow of Service Control
000 DATA_COPY………………WB Data Save Function000 BU_TRANS
001 DATABACKUP…………….No use for Service.<omission>
002 VCOM ………………………VCOM Adjustment Function.000 ENABLE001 ADJUST
003 SG_EP …………… ………..No use for Service.<omission>
004 MEASURE …………… ……No use for Service.<omission>
005 …………… ……….……….. Emitter Strength setting Function.000 EMIT_STR
006 WB …………… …………… W/B adjustment<omission>
007 GAISO …………… .. …….. Change RGB sensor setting by bezel color.000 GAISO
4-12-1. Digital Service Mode 4-12-2. VPC Service Mode
54
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
4-12. Index Flow of Service Control
000 WYVERN<omission>
001 TUNING<omission>
002 D_DEMOD No use for Service.<omission>
003 SATELLITE<omission>
004 HDMI000 FORCE_ARC
005 AUDIO000 MPEG_LV …Level OFFSET for MPEG1-L1/L2.001 HEAAC_LV …Level OFFSET for HE-AAC.
005 TEMPSEN …………….. No Use for Service<omission>
4-12-3. Chassis Service Mode
55
Service Adjustment KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
SECTION 5DIAGRAMS
5-1. BLOCK DIAGRAM5-1-1. BAT-V BOARD ( KDL-32EX420, 32, 40, 46 EX520, 32, 40, 46 EX523)
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
56
Diagrams
5-1-2. BAT-S BOARD (KDL-22, 26EX420, 22, 26EX423 (EXCEPT HONGKONG AND TAIWAN MODEL))
DDR31Gb/2Gb
DDR31Gb/2Gb
One NAND2Gb
USB
HUB
Ether
PHY
Audio
AMPRMII
YCbCr /
CVBS
CVBS
L/R
PC AUDIO (Shared w/ HDMI)
RGB
TMDS
TMDS TMDSSPDIF
USB2.0
L/R
TS
LVDS
LEDIR Remote Rx
Ladder
GPIOUART
SIRCSGPIO
IIC
Temp.
Sensor
IIC
PWM
60Hz CCFL /
60Hz LED
Human Sensor
58
IIS
Audio
Sub AMPL/R
Lumi SensorKey (Normal)
HDMI
EQSW
L/R
ATREYU
HORUS
(Si Tu- S)
GAIA
(DVB-T2 Demod)SEKITO2
(DVB-S2 Demod)
ATV
IFIF
TS TS
IFASCOT2Ssip
(Si Tu- T)
HP / LINE OUT
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
57
Diagrams
5-1-3. BAT-S BOARD (KDL-22, 26EX420 (HONG KONG MODEL))
DDR31Gb/2Gb
DDR31Gb/2Gb
One NAND2Gb
USB
HUB
Ether
PHY
HORUS
(Si Tu- S)
ZHUI
(DTMB Demod)SEKITO2
(DVB-S2 Demod)
Audio
AMP
ATVCATV
IFIF
TS TS
RMII
YCbCr /
CVBS
CVBS
RGB
TMDS
TMDS TMDSSPDIF
USB2.0
IF
L/R
LVDS
LEDIR Remote Rx
Ladder
GPIOUART
SIRCSGPIO
IIC
Temp.
Sensor
IIC
PWM
Human Sensor
59
IIS
Audio
Sub AMPL/R
Lumi SensorKey (Normal)
HDMI
EQSW
ATREYU
ASCOT2Ssip
(Si Tu- T)
60Hz CCFL /
60Hz LED
L/R
PC AUDIO (Shared w/ HDMI)
L/R
HP / LINE OUT
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
58
Diagrams
5-1-4. BAT-S BOARD (KDL-22, 26EX420 (TAIWAN MODEL))
DDR31Gb/2Gb
DDR31Gb/2Gb
One NAND2Gb
USB
HUB
Ether
PHY
Audio
AMP RMII
YCbCr /
CVBS
CVBS
RGB
TMDS
TMDS TMDSSPDIF
USB2.0
L/R
TS
LVDS
LEDIR Remote Rx
Ladder
GPIOUART
SIRCSGPIO
IIC
Temp.
Sensor
IIC
PWM
Human Sensor
60
IIS
Audio
Sub AMPL/R
Lumi SensorKey (Normal)
HDMI
EQSW
ATREYU
HORUS
(Si Tu- S)
ZHUI
(DTMB Demod)SEKITO2
(DVB-S2 Demod)
ATVCATV
IFIF
TS TS
IFASCOT2Ssip
(Si Tu- T)
60Hz CCFL /
60Hz LED
L/R
PC AUDIO (Shared w/ HDMI)
L/R
HP / LINE OUT
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
59
Please ensure that the Stamp Mark side is at T-Con side.
CAUTION :1. Do not overpull the wires during dressing --> avoid disconnection of wires.2. Make sure wires are kept away from sharp edges, heat sinks & other high-temperature parts.
5-2-1. KDL-22EX420 , 22EX4235-2. WIRE DRESSING
Diagrams
Connector
Tape 60mm
1) Inserting Flexible Flat Cable
2) Inserting Connector Assy 14P
Insert tape
Insert connector
4) Inserting Harness Assy
Please take caution:i ) Confirm the connector is not loose.
ii ) Insert the Harness wire according to correct way.
Insert connector
Insert tape
Insert connector
Insert connector
Insert connector
Insert connector
Insert tape
3) Inserting Connector Assy 28P
Insert connector
Insert connector
Insert connector
Before inserting LCD Panel Bracket
After inserting LCD Panel Bracket
Insert connector
Insert tape
Insert tape
Insert tape
Insert connector
60
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Diagrams
5-2-2. KDL- 26EX420, 26EX423
1) Inserting Flexible Flat Cable 3) Inserting Connector Assy 28P2) Inserting Connector Assy 14P
4) Inserting Harness Assy
Insert connector
Insert tape
Insert connector (after BAT-V Board being
inserted) Insert connector
Insert connector
Please take caution:i ) Confirm the connector is not loose.
ii ) Insert the Harness wire according to correct way.
Insert tape
Insert connector
Insert connector
Insert connector
Insert tape
Insert switch unit
Insert tape
Insert tapeInsert tape
Insert switch unit
Insert connector
Insert tape
61
Connector
Tape 60mm
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Diagrams
5-2-3. KDL-32EX420, 32EX520, 32EX523
2) Inserting Flexible Flat Cable
3) Inserting Connector Assy 28P1) Inserting Connector Assy 14P
4) Inserting Harness Assy
Please insert Connector Assy28P into the hook.
Please take caution:i ) Confirm the connector is not loose.
ii ) Insert the Harness wire according to correct way.
Insert connector
Insert tape
Insert connectorInsert connector
Inserting Connector at Main BoardPlease ensure that the wire did not cross when inserting connector at Main Board.
Insert tape
Insert tape
Insert connector
Insert connector
Insert tape
Insert tape
Insert tape
Insert tape
62
Connector
Tape 60mm
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Insert connector
Insert connector
Insert connector
Insert connector
Diagrams
5-2-4. KDL-40EX520, 40EX523
2) Inserting Flexible Flat Cable 11 40s 3) Inserting Connector Assy 28P1) Inserting Connector Assy 14P
4) Inserting Harness Assy
Please take caution:i ) Confirm the connector is not loose.
ii ) Insert the Harness wire according to correct way.
Please ensure that the wire did not cross when inserting connector at Main Board.
Insert connector
Insert connector
Insert tapeInsert connector
Insert tape Insert tape
Insert tape
Insert tape
Insert connector
Insert connector
Insert tape
Insert tape
63
Connector
Tape 60mm
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Diagrams
5-2-5. KDL-46EX520, 46EX523
2) Inserting Flexible Flat Cable
3) Inserting Connector Assy 28P1) Inserting Connector
4) Inserting Harness Assy
ii ) Insert the Harness wire according to correct way.
Insert connector
Insert tape
Please take caution:i ) Confirm the connector is not loose.
Insert connector
Insert carefully at hook
Please ensure that the wire did not cross when inserting connector at Main Board.
Align the tape with the LCD hole
Insert connector Insert connector
Insert carefully at hook
Insert connector
Insert tape
Insert tapeInsert connector
Insert tape
Insert tape
Insert tape
Insert tape
Insert connector
Insert connector
64
Connector
Tape 60mm
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
5-3. CONNECTOR DIAGRAM5-3-1. KDL- 22, 26 EX420, 22, 26 EX423
two)
B )
WXGA
Pane
l NC
(Agin
g pin)
SCL
SDA
GND
RX0-
RX0+
GND
RX1-
RX1+
GND
RX2-
RX2+
GND
RXCL
K-RX
CLK+
GND
RX3-
RX3+
GND
PANE
L_SE
LSE
LLVD
S(De
fault:V
ESA)
B-IN
T / W
PGN
DGN
DNC
(Ope
n: Ins
ide of
pane
l)VC
CVC
CVC
CVC
CVC
CHi
rose
KDF7
1G-30
S-1H
26",2
2" O
nl y
Pane
l_sel
NC SCL
SDA
WP NC LVDS
_SEL
= NC
NC NC NC GND
RO[0]
NRO
[0]P
RO[1]
NRO
[1]P
RO[2]
NRO
[2]P
GND
ROCL
K-RO
CLK+
GND
RO[3]
NRO
[3]P
RO[4]
NRO
[4]P
GND
GND
RE[0]
NRE
[0]P
RE[1]
NRE
[1]P
RE[2]
NRE
[2]P
GND
RECL
K-RE
CLK+
GND
RE[3]
NRE
[3]P
RE[4]
NRE
[4]P
GND
GND
GND
GND
GND
NC Vcc(1
2V)
Vcc(1
2V)
Vcc(1
2V)
P-TW
O Fli
p tyo
eVc
c(12V
)19
6334
-5104
1-3(m
odel
name
of P
- t N
o T-C
on B
oard
24V
DC24
V DC
24V
DC24
V DC
24V
DCGN
DGN
DGN
DGN
DGN
DBL
Statu
sBL
ON/
OFF
NC EXT P
WM
CI11
14M1
HR0-N
H (
JST c
ompa
tible
SM14
B-SR
SS-T
B(C
ivilux
)JS
T SM1
4B-S
RSS-
TB
FFC
B-WX
GA pa
nel
130
301
229
292
328
283
427
274
526
265
625
256
724
247
823
238
922
229
021
2110
120
2011
219
1912
318
1813
417
1714
516
1615
615
1516
714
1417
813
1318
912
1219
011
1120
110
1021
29
922
38
823
47
724
56
625
65
526
74
427
83
328
92
229
01
130
LVDS
-FFC
FH
D Pa
nel
1NC
NC1
2NC
NC2
3NC
123
4NC
114
5NC
95
6NC
NC6
7NC
NC7
8NC
NC8
95
NC9
0NC
NC10
14
1311
23
4212
311
4113
441
4014
540
3915
639
3816
738
3717
837
3618
936
3519
035
3420
134
3321
233
3222
332
3123
431
3024
530
2925
629
4426
728
4327
843
2728
925
2629
024
2530
123
2431
222
2332
321
2233
420
2134
519
2035
618
1936
717
1837
816
1738
915
1639
014
1540
113
1441
212
4642
327
2843
426
NC44
5NC
NC45
642
NC46
7NC
NC47
848
4848
949
4949
050
5050
151
5151
11
NC2
NC3
NC4
NC5
26
NC7
NC8
NC9
NC10
411
312
NC13
614 24
"
22",
PANE
L_VC
C_SW
1PA
NEL_
VCC_
SW2
PANE
L_VC
C_SW
3PA
NEL_
VCC_
SW4
PANE
L_VC
C_SW
5NC
6GN
D7
GND
8Pa
nel_C
trl9 / B
INT
9NC
1Pa
nel_C
trl8 / P
ANEL
_SEL
1GN
D1
PANE
L_OD
D3_P
1PA
NEL_
ODD3
_N1
GND
1PA
NEL_
ODD_
CLK_
P1
PANE
L_OD
D_CL
K_N
1GN
D1
PANE
L_OD
D2_P
1PA
NEL_
ODD2
_N2
GND
2PA
NEL_
ODD1
P2
PANE
L_OD
D1_N
2GN
D2
PANE
L_OD
D0_P
2PA
NEL_
ODD0
_N2
GND
2Pa
nel_C
trl11 /
SDA
2Pa
nel_C
trl12 /
SCL
2NC
3CN
2000
26",2
2" O
nly
orPa
nel_C
trl1 / N
C1
Pane
l_Ctrl2
/ TCO
N_RD
Y2
Pane
l_Ctrl3
/ T_T
D_HS
YNC
3Pa
nel_C
trl4 / X
_FRC
_RST
4Pa
nel_C
trl5 / L
R_FL
AG(Fo
r A5
Pane
l_Ctrl6
/ SA_
MODE
6Pa
nel_C
trl7 / S
ETON
2(NC)
7Pa
nel_C
trl8 / P
ANEL
_SEL
8Pa
nel_C
trl9 / B
INT
9Pa
nel_C
trl10 /
T_TD
_VSY
N1
Pane
l_Ctrl1
1 / SD
A1
Pane
l_Ctrl1
2 / SC
L1
GND
1B(
LF)(S
N)PA
NEL_
EVEN
4_P
1PA
NEL_
EVEN
4_N
1PA
NEL_
EVEN
3_P
1PA
NEL_
EVEN
3_N
1GN
D1
PANE
L_EV
EN_C
LK_P
1PA
NEL_
EVEN
_CLK
_N2
GND
2PA
NEL_
EVEN
2_P
2PA
NEL_
EVEN
2_N
2PA
NEL_
EVEN
1P2
PANE
L_EV
EN1_
N2
PANE
L_EV
EN0_
P2
PANE
L_EV
EN0_
N2
GND
2PA
NEL_
ODD4
_P2
PANE
L_OD
D4_N
3PA
NEL_
ODD3
_P3
PANE
L_OD
D3_N
3GN
D3
PANE
L_OD
D_CL
K_P
3PA
NEL_
ODD_
CLK_
N3
GND
3PA
NEL_
ODD2
_P3
PANE
L_OD
D2_N
3PA
NEL_
ODD1
P3
PANE
L_OD
D1_N
4PA
NEL_
ODD0
_P4
PANE
L_OD
D0_N
4GN
D4
GND
4Pa
nel_C
trl13
4GN
D4
PANE
L_VC
C_SW
4PA
NEL_
VCC_
SW4
PANE
L_VC
C_SW
4PA
NEL_
VCC_
SW5
PANE
L_VC
C_SW
5CN
2001
1-842
-546-1
1
24"O
nlyI-P
EX
1-842
-088-1
1
FFC
Direc
t in C
onne
ctor
BAT-S
board
1BD
UAR
T Rx/
BDR
KEY2
/HLR
DEV
ICE_
SDA
2BD
R ST
BY_+
3.3V
3BD
R UA
RT_T
x/ RF
UAR
T_TX
4BD
R UA
RT_R
x/ RF
_UAR
T_RX
5BD
R W
AKEU
P_ST
BY_M
ICON
/RF S
EL6
BDR
GPIO
0/ RF
_RST
7BD
R GN
D8
WIFI
GND
9W
IFI U
SB_P
10W
IFI G
ND11
WIFI
USB
_N12
WIFI
GND
13W
IFI V
BUS
14 H
LR D
EVIC
E_SC
L15
HLR
LED_
ON_T
IMER
16HL
R SIR
CS17
HLR
LED_
STBY
18HL
R LE
D_PO
WER
19HL
R LE
D_RE
C20
HLR
LED_
PIC_M
UTE
21HL
R GN
D22
HLR
OPT_
SENS
23HL
R ST
BY_3
.3V24
HLR
3.3V
25SW
POW
ER_K
EY26
SW_K
EY27
SW G
ND28
HMS
DET /
SONY
LOGO
29HM
S 5V
/LOG
O 5V
30HM
S GN
D/ LO
GO G
NDCN
9006
1820
1621
130
pin co
nnec
tor
1ST
BY3.3
V
2RS
232_
RXD
3RS
232_
TXD
4SIR
CS_O
UT5
SIRCS
_IN6
GND
CN90
056p
in co
nnec
tor 18
2113
311
1L+
2L-
3R-
4R+
Spe
aker
Conn
ector
V2.0
ch:
CN46
01 4p
in 0-8
44-17
3-01 J
ST S
M04B
-PBV
SS-TB
10ST
BY_+
3.3V
9AU
DIO+
12.5V
8AU
DIO+
12.5V
7AU
DIO+
12.5V
_GND
6AU
DIO+
12.5V
_GND
5RE
G+12
.5V_G
ND4
REG+
12.5V
_GND
3RE
G+12
.5V2
REG+
12.5V
1T-C
ON_V
CCCN
6001
1-842
-569-1
1HE
ADER
ASS
EMBL
Y FOR
PWB 1
0P
9AC
_OFF
_DET
8PO
WER
ON7
BL_E
RR6
BL_O
N5
DIMM
ER4
HSYN
C/DI
MMER
_DC
3TC
ON_O
N2
PFC_
PWR
1GN
DCN
6002
1-8
19-45
2-11
1GN
D2
UART
D_TX
3UA
RTD_
RX4
RESE
T5
STBY
_+3.3
V6
MODE
_TVM
7UA
RTA_
RX8
NC (M
D2)
9UA
RTC_
RX10
UART
C_TX
11GN
D12
UART
A_TX
13EC
S_MA
TRIX
14ST
BY_+
3.3V
15MO
DE_P
EM16
PEM_
LOG_
RX17
PEM_
LOG_
TX18
GND
CN90
041-7
74-66
7-51
TL-E
X1 C
onne
ctor,F
FC/FP
C 18
P
TL-E
X1JIG
board
NC 6 4 5 1 2 3 5 3 1BV
- H H
arnes
s4
H-B
NC 2 NC 5 12 4 6 3 7 2 10 1 11 2 3 1 2 3 1 1 2 3 4 5 6 1 2 2 1Ho
using
2.0
ch:
4pin
0-844
-426-0
1 JST
PBV
P-04
V
10 12 14 11 13 15 17 16 18 24 7 1 6 5 2 4 8 3 9
-B H
arnes
s-B
JAM
3pin
Strai
ght
GND
130
MOTIO
N_SE
NS2
28RE
G+5V
329
1-821
-130-1
1
leGN
D1
27PO
WER
_INT
225
KEY1
326
1-822
-693-1
1
dST
BY+3
.3V1
23r/O
PT_S
enso
rGN
D2
21LE
D_RE
C3
19LE
D_ST
BY4
17LE
D_TIM
ER5
15LE
D_PO
WER
618
LED_
PIC_M
UTE
720
DEVIC
E_SD
A/GN
D8
NCDE
VICE_
SCL/L
ED_B
D9
NCOP
T_SE
NS10
22VD
+3.3V
1124
SIRCS
1216
1-821
-139-1
1
dule
SYNC
15
RESE
T2
6GN
D3
7/3a
-2/P-
1RX
43
TX5
4VD
D6
2JA
M SY
T10-0
6-WL-E
T1-8
21-14
6-11
ule (E
U On
ly) GND
110
WIFI
VCC
213
WIFI
USB
_P3
9W
IFI U
SB_M
411
WIFI
GND
58
SM05
B-GH
S-TB
1-819
-334-1
1
L+ (F
asten
# 18
7)1
1L-
(Faste
n #11
0)2
2
R- (F
asten
# 11
0)2
3R+
(Fas
ten #
187)
14
eet [
Appe
ndix
SPCo
nnec
tor ]
CN67
01SJ
M20-2
8WLB
To B
board
(100
106)
T-CON
_Vcc
12V
28NC
GND
27NC
con
T-CON
_VCC
12V
26NC
GND
25NC
T-CON
_VCC
_12V
To B
241
GND
23NC
BDR_
ASU_
12V
22NC
tion
GND
21NC
BDR_
ASU_
12V
20NC
GND
19NC
REG1
2V18
2GN
D17
4RE
G12V
163
GND
155
AU_1
2V14
8G-
AU_G
ND13
6G-
AU_1
2V12
9AU
_GND
117
oard
STBY
3.3V
1010
GND
91
T-CON
_ON
83
AC_O
FF_D
ET7
9BL
_ERR
67
BL O
N5
6NC
44
PFC_
ON3
2PW
M_DI
MMER
25
POW
ER_O
N1
8
CN62
01To
LED
Diive
rVL
ED_V
CC1
1VL
ED_G
ND
26
LED_
ON3
12GL
_ERR
411
GND
5NC
PWM_
DIMM
ER6
141-8
15-02
2-11
JST
XA 6
P
AC_IN
wer C
ord
AC-N
11
AC-L
22
CN60
01SF
P79-0
2WLB
JAM
1-822
-908-1
1
board
STBY
3.3V
11
RS23
2_RX
D2
2RS
232_
TXD
33
SIRCS
_IN4
4SIR
CS_O
UT5
5GN
D6
6CN
101
1820
1831
1
ard
65
Motio
n Sen
sor
3a-X
/V/2
P-1/2 SW
mod
ulSW
mod
uleAL
L HLR
board
LED/
IR/R
GB Se
nsor/
2b-3
3a-V
3a-2
P-1
P-2 RF
RC m
odRF
RC m
odule
2b-1/
2b-2/
2b-3/
3a-1 /
only
Japa
n
Wifi m
odu
SPEA
KER
Fron
tLc
h
SPEA
KER
Fron
tRc
h Refer
to Sh
e T- Opt
B bo Po
w
R3 or
RU
HMS3
boa
30pin
FFC
W/Plu
g Tcon
side
51pin
FPC
(Sumid
en)
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
5-3-2. KDL- 32EX420
nd b
oard)
PAN
EL F
FC96
pin
(Onl
y In
terfa
ce b
etwe
en b
oard
an
T-co
n Bo
ard(
60Hz
)To
BAT
30VC
C29
VCC
28VC
C27
VCC
26VC
C25
NC
(Ope
n: In
side
of p
anel
)24
GN
D23
GN
D22
B-IN
T / W
P21
SELL
VDS(
Def
ault:
VESA
)20
PAN
EL_S
EL19
GN
D18
RX3
+17
RX3
-16
GN
D15
RXC
LK+
14R
XCLK
-13
GN
D12
RX2
+11
RX2
-10
GN
D9
RX1
+8
RX1
-7
GN
D6
RX0
+5
RX0
-4
GN
D3
SDA
2SC
L1
NC
(Agi
ng p
in)
TL-E
X1JI
G b
oard
PAN
EL_V
CC
_SW
1PA
NEL
_VC
C_S
W2
LVD
S-FF
C
PAN
EL_V
CC
_SW
3B-
WXG
A pa
nel
PAN
EL_V
CC
_SW
4PA
NEL
_VC
C_S
W5
NC
6G
ND
7G
ND
8Pa
nel_
Ctrl
9 / B
INT
9N
C10
Pane
l_C
trl8
/ PAN
EL_S
11G
ND
12PA
NEL
_OD
D3_
P13
PAN
EL_O
DD
3_N
14G
ND
15PA
NEL
_OD
D_C
LK_P
16PA
NEL
_OD
D_C
LK_N
17G
ND
18PA
NEL
_OD
D2_
P19
PAN
EL_O
DD
2_N
20G
ND
21PA
NEL
_OD
D1P
22PA
NEL
_OD
D1_
N23
GN
D24
PAN
EL_O
DD
0_P
25PA
NEL
_OD
D0_
N26
GN
D27
Pane
l_C
trl11
/ SD
A28
Pane
l_C
trl12
/ SC
L29
NC
30
1-84
2-08
8-11
GN
D1
UAR
TD_T
X2
UAR
TD_R
X3
RES
ET4
STBY
_+3.
3V5
MO
DE_
TVM
6U
ARTA
_RX
7N
C (M
D2)
8U
ARTC
_RX
9U
ARTC
_TX
10G
ND
11U
ARTA
_TX
12EC
S_M
ATR
IX13
STBY
_+3.
3V14
MO
DE_
PEM
15PE
M_L
OG
_RX
16PE
M_L
OG
_TX
17G
ND
18C
N90
041-
774-
667-
51L-
EX1
Con
nect
or,F
FC/F
PC 1
8P
CN20
00
d /HLR
DEV
ICE_
SDA
T_TX
T_R
XIC
ON
/RF
SEL
-01
JST
SM04
B-PB
VSS-
TB(L
F)(S
N)
3V RXD TX
DO
UT
_IN B 10
P
TL
BAT-
V bo
ard
61
BD U
SB G
ND
12
BD V
BUS
33
BD U
SB_P
44
BD
GN
D2
5BD
USB
_N5
6BD
USB
SPD
IF7
BD E
JEC
T/BD
R O
N8
BD D
ISC
1/BD
R G
PIO
19
BD D
ISC
2/U
_DL_
STAT
10BD
UAR
T Tx
/ BD
R K
EY1
NC
11BD
UAR
T R
x/ B
DR
KEY
2 6
12BD
R S
TBY_
+3.3
V4
13BD
R U
ART_
Tx/ R
F U
ART
514
BDR
UART
_Rx/
RF_
UAR
T1
15BD
R W
AKEU
P_ST
BY_M
I2
16BD
R G
PIO
0/ R
F_R
ST3
17BD
R G
ND
18W
IFI G
ND
19W
IFI U
SB_P
20W
IFI G
ND
21W
IFI U
SB_N
22W
IFI G
ND
23W
IFI V
BUS
NC
24 H
LR D
EVIC
E_SC
L5
25H
LR L
ED_O
N_T
IMER
1226
HLR
SIR
CS4
27H
LR L
ED_S
TBY
628
HLR
LED
_PO
WER
329
HLR
LED
_REC
730
HLR
LED
_PIC
_MU
TE2
31H
LR
GN
D10
32H
LR O
PT_S
ENS
133
HLR
STB
Y_3.
3V11
34H
LR 3
.3V
235
SW P
OW
ER_K
EY3
36SW
_KEY
137
SW
GN
D2
38H
MS
DET
/SO
NY
LOG
O3
39H
MS
5V /L
OG
O 5
V1
40H
MS
GND
/ LO
GO
GN
DC
N90
061-
818-
692-
21
(JS
T)H
EAD
ER A
SSEN
BLY
40P
11
L+2
2L-
23
R-
14
R+
Hou
sing
Spea
ker C
onne
ctor
426-
01 J
ST P
BVP-
04V
2.0c
h:C
N46
01 4
pin
0-84
4-17
3-
11
STBY
3.3
22
RS2
32_R
33
RS2
32_T
44
SIR
CS_
O5
5SI
RC
S_6
6G
NDC
N90
056p
in c
onne
ctor
182
1133
11
1010
STBY
_+3.
3V12
9AU
DIO
+12.
5V14
8AU
DIO
+12.
5V11
7AU
DIO
+12.
5V_G
ND
136
AUD
IO+1
2.5V
_GN
D15
5R
EG+1
2.5V
_GN
D17
4R
EG+1
2.5V
_GN
D16
3R
EG+1
2.5V
182
REG
+12.
5V24
1T-
CO
N_V
CC
CN
6001
1-84
2-56
9-11
HEA
DER
ASS
EMBL
Y FO
R P
WB
79
AC_O
FF_D
ET1
8PO
WER
ON
67
BL_E
RR
56
BL_O
N2
5D
IMM
ER4
4H
SYN
C/D
IMM
ER_D
C8
3TC
ON
_ON
32
PFC
_PW
R9
1G
ND
CN
6002
1-
819-
452-
11
s S
140
238
339
137
235
336
BV -
H H
arne
ssH
-B
133
231
329
427
525
628
730
8N
C9
NC
1032
1134
1226
115
216
317
413
514
612
11
22
23
14
2.0c
h:4p
in 0
-844
- 4
ctor
]
28N
C27
NC
26N
C25
NC
241
23N
C22
NC
21N
C
20N
C19
NC
182
174
163
155
148
136
B bo
ardG
-B H
arne
ss12
9G
-B
117
1010
91
83
79
67
56
44
32
25
18
1 2 3 4
LS
1 2 3 4 5 11
Pow
er C
ord
22
11
22
33
44
55
66
3 bo
ard
JAM
3pi
n St
raig
htG
ND
nsor
MO
TIO
N_S
ENS
REG
+5V
1-82
1-13
0-11
GN
Dle
POW
ER_I
NT
KEY1
1-82
2-69
3-11
STBY
+3.3
VG
B Se
nsor
/OPT
_Sen
sor
GN
DLE
D_R
ECLE
D_S
TBY
LED
_TIM
ERLE
D_P
OW
ERLE
D_P
IC_M
UTE
DEV
ICE_
SDA/
GN
DD
EVIC
E_SC
L/LE
D_B
DR
OPT
_SEN
SVD
+3.3
VSI
RC
S1-
821-
139-
11
SYN
CR
ESET
dule
GN
D/2
b-3/
3a-1
/3a-
2/P-
1R
Xn
TX VDD
JAM
SYT1
0-06
-WL-
ET1-
821-
146-
11
ERL+
(Fas
ten
# 18
7)L-
(Fas
ten
#110
)
ERR
- (Fa
sten
# 1
10)
R+
(Fas
ten
# 18
7)
to S
heet
[ Ap
pend
ixSP
Conn
ec
CN
6704
(32"
GE2
A)SJ
M20
-28W
LBTo
B b
oard
(100
106)
T-CO
N_Vc
c12V
GN
D
T-co
nT-
CON_
VCC1
2VG
ND
T-CO
N_VC
C_12
V To
BG
ND
BDR_
ASU_
12V
Opt
ion
GN
D
BDR_
ASU_
12V
GN
DR
EG12
VG
ND REG
12V
GND AU
_12V
AU_G
ND
AU_1
2VAU
GN
Dbo
ard
STBY
3.3V
GN
DT-
CO
N_O
NAC
_OFF
_DET
BL_E
RR
BL O
ND
C_D
IMM
ERPF
C_O
NPW
M_D
IMM
ERPO
WER
_ON
To L
S C
N67
01 (3
2" G
E2A)
+OUT
1NO
N
+OUT
3NO
NM
OLE
X L
4P
1-82
2-35
9-11
To L
S C
N67
02 (3
2" G
E2A)
-OUT
1NO
N
-OUT
3NO
NNC M
OLE
X L
5P
1-82
2-36
0-11
AC_I
N
AC-N
AC-L
CN
6001
SFP7
9-02
WLB
JAM
1-82
2-90
8-11
r RU
boar
dST
BY3.
3VR
S232
_RXD
RS2
32_T
XDSI
RC
S_IN
SIR
CS_
OU
TG
ND
CN
101
1820
1831
1
mod
ule
2 bo
ard
C m
odul
30pi
n FF
C
66
HMS
Mot
ion
Sen
3a-X
/V/2
P-1/
2
SW m
odul
ALL
LED
/IR/R
G2b
-33a
-V3a
-2P-
1P-
2
RFR
C m
o d2b
-1/2
b-2/
only
Jap
an
SPEA
KEFr
ont
Lch
SPEA
KEFr
ont
Rch Re
fer O B
R3 o
r
SW m
HLR2
RFRC
Diagrams KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
5-3-3. KDL- 32, 40, 46 EX520, 32, 40, 46 EX523PA
NEL
FFC
96pi
n
Inte
rface
bet
ween
boa
rd a
nd b
oard)
con
Boar
d(60
Hz)
_Ctrl
1 / N
C_C
trl2
/ TCO
N_RD
Y_C
trl3
/ NC
_Ctrl
4 / L
UT_S
EL2
_Ctrl
5 / L
UT_S
EL1
_Ctrl
6 / L
UT_S
EL0
_Ctrl
7 / N
C_C
trl8
/ PAN
EL_S
EL_C
trl9
/ BIN
T_C
trl10
/ NC
_Ctrl
11 /
SDA
_Ctrl
12 /
SCL
EL_E
VEN4
_PEL
_EVE
N4_N
EL_E
VEN3
_PEL
_EVE
N3_N
EL_E
VEN_
CLK_
PEL
_EVE
N_CL
K_N
EL_E
VEN2
_PEL
_EVE
N2_N
EL_E
VEN1
PEL
_EVE
N1_N
EL_E
VEN0
_PEL
_EVE
N0_N
EL_O
DD4_
PEL
_ODD
4_N
EL_O
DD3_
PEL
_ODD
3_N
EL_O
DD_C
LK_P
EL_O
DD_C
LK_N
EL_O
DD2_
PEL
_ODD
2_N
EL_O
DD1P
EL_O
DD1_
NEL
_ODD
0_P
EL_O
DD0_
N
_Ctrl
13
EL_V
CC_S
WEL
_VCC
_SW
EL_V
CC_S
WEL
_VCC
_SW
EL_V
CC_S
W
L-EX
1JIG
boa
rd
(Onl
y
T-c
To B
ATC
151
Pane
l_CO
N_RD
Y2
50Pa
nel_
C3
49Pa
nel_
UT_S
EL2
448
Pane
l_UT
_SEL
15
47Pa
nel_
UT_S
EL0
646
Pane
l_C
745
Pane
l_AN
EL_S
EL8
44Pa
nel_
NT9
43Pa
nel_
NC10
42Pa
nel_
SDA
1141
Pane
l_SC
L12
LVDS
-FFC
40
Pane
l_13
B-PE
L3 3
9G
ND_P
1438
PANE
_N15
37PA
NE_P
1636
PANE
_N17
35PA
NE18
34G
NDCL
K_P
1933
PANE
CLK_
N20
32PA
NE21
31G
ND_P
2230
PANE
_N23
29PA
NEP
2428
PANE
_N25
27PA
NE_P
2626
PANE
_N27
25PA
NE28
24G
NDP
2923
PAN E
N30
22PA
NEP
3121
PANE
N32
20PA
NE33
19G
NDCL
K_P
3418
PANE
CLK_
N35
17PA
NE36
16G
NDP
3715
PAN E
N38
14PA
NEP
3913
PANE
N40
12PA
NEP
4111
PANE
N42
10PA
NE43
9G
ND44
8G
ND45
7Pa
nel _
466
GND
W47
5PA
NEW
484
PANE
W49
3PA
NEW
502
PANE
W51
1PA
NE
1 2 3 4 5 6 7 8 9 10 11 12 13T
14 15 16 17 18
tor,F
FC/F
PC 1
8P
onne
ctor
Pane
l_Ct
rl1 /
NCPa
nel_
Ctrl2
/ TC
Pane
l_Ct
rl3 /
NCPa
nel_
Ctrl4
/ LU
Pane
l_Ct
rl5 /
LUPa
nel_
Ctrl6
/ LU
Pane
l_Ct
rl7 /
NCPa
nel_
Ctrl8
/ PA
Pane
l_Ct
rl9 /
BIN
Pane
l_Ct
rl10
/ NSD
APa
nel_
Ctrl1
1 / S
Pane
l_Ct
rl12
/ SG
NDPA
NEL_
EVEN
4 _PA
NEL_
EVEN
4_PA
NEL_
EVEN
3_PA
NEL_
EVEN
3_G
NDPA
NEL_
EVEN
_ CPA
NEL_
EVEN
_CG
NDPA
NEL_
EVEN
2_PA
NEL_
EVEN
2_PA
NEL_
EVEN
1PA
NEL_
EVEN
1 _PA
NEL_
EVEN
0_PA
NEL_
EVEN
0_G
NDPA
NEL_
ODD
4_PA
NEL_
ODD
4_PA
NEL_
ODD
3_PA
NEL_
ODD
3_G
NDPA
NEL_
ODD
_ CPA
NEL_
ODD
_CG
NDPA
NEL_
ODD
2_PA
NEL_
ODD
2_PA
NEL_
ODD
1 PPA
NEL_
ODD
1_PA
NEL_
ODD
0_PA
NEL_
ODD
0_G
NDG
NDPa
nel_
Ctrl1
3G
NDPA
NEL_
VCC_
S WPA
NEL_
VCC_
SWPA
NEL_
VCC_
SWPA
NEL_
VCC_
SWPA
NEL_
VCC_
SW
1-84
2-54
8-11
PBVS
S-TB
(LF)
(SN)
Yam
aich
i
GND
UART
D_TX
UART
D_RX
RESE
TST
BY_+
3.3V
MO
DE_T
VMUA
RTA_
RXNC
(MD2
)UA
RTC_
RXUA
RTC_
TXG
NDUA
RTA_
TXEC
S_M
ATRI
XST
BY_+
3.3V
MO
DE_P
EMPE
M_L
OG
_RX
PEM
_LO
G_T
XG
NDCN
9004
1-77
4-66
7-51
TL-E
X1 C
onne
c t
CN20
01
FFC
Dire
ct in
Co
BAT-
V bo
ard
y.
61
BD U
SB G
ND1
2BD
V
BUS
33
BD U
SB_P
44
BD G
ND2
5BD
USB
_N5
6BD
USB
SPD
IF7
BD E
JECT
/BDR
ON
8BD
DIS
C1/B
DR G
PIO
19
BD D
ISC2
/U_D
L_ST
AT10
BD U
ART
Tx/ B
DR K
EY1
NC11
BD U
ART
Rx/ B
DR K
EY2
/HLR
DEV
ICE_
S12
BDR
STBY
_+3.
3V13
BDR
UART
_Tx/
RF
UART
_TX
14BD
R UA
RT_R
x/ RF
_UAR
T_RX
15BD
R W
AKEU
P_ST
BY_M
ICO
N/RF
SEL
16BD
R G
PIO
0/ R
F_RS
T17
BDR
GND
518
WIF
I GND
319
WIF
I USB
_P1
20W
IFI G
ND4
21W
IFI U
SB_N
NC22
WIF
I GND
223
WIF
I VBU
SNC
24 H
LR D
EVIC
E_SC
L5
25HL
R LE
D_O
N_TI
MER
1226
HLR
SIRC
S4
27HL
R LE
D_ST
BY6
28HL
R LE
D_PO
WER
329
HLR
LED_
REC
730
HLR
LED_
PIC_
MUT
E2
31HL
R G
ND10
32HL
R O
PT_S
ENS
133
HLR
STBY
_3.3
V11
34HL
R 3.
3V2
35SW
PO
WER
_KEY
336
SW_K
EY1
37SW
G
NDC
238
HMS
DET
/SO
NY L
OG
OC
339
HMS
5V /L
OG
O 5V
C1
40HM
S G
ND/ L
OG
O G
NDCN
9006
1-81
8-69
2-21
(
JST )
HEAD
ER A
SSEN
BLY
40P
11
L+2
2L-
23
R-1
4R+
ousin
g
Spe
aker
Con
nect
orBV
P-04
V2.
0ch:
CN46
01 4
pin
0-84
4-17
3-01
JST
SM04
B-P
11
STBY
3.3V
22
RS23
2_RX
D3
3RS
232_
TXD
44
SIRC
S_O
UT5
5SI
RCS_
IN6
6G
NDCN
9005
6pin
con
necto
r 182
1133
11
1010
STBY
_+3.
3V12
9AU
DIO
+12.
5V14
8AU
DIO
+12.
5V11
7AU
DIO
+12.
5V_G
ND13
6AU
DIO
+12.
5V_G
ND15
5RE
G+12
.5V_
GND
174
REG+
12.5
V_G
ND16
3RE
G+12
.5V
182
REG+
12.5
V24
1T-
CON_
VCC
CN60
011-
842-
569-
11HE
ADER
ASS
EMBL
Y FO
R PW
B 10
P
79
AC_O
FF_D
ET1
8PO
WER
ON
67
BL_E
RR5
6BL
_ON
25
DIM
MER
44
HSYN
C/DI
MM
ER_D
C8
3TC
ON_
ON3
2PF
C_PW
R9
1G
NDCN
6002
1-
819-
452-
11
NC a
nd N
o HM
S3 B
oard
for
the
follo
wing
Eur
ope
mod
els o
nly
NC- K
DL-3
2EX5
20
NC- K
DL-3
2EX5
23
NC- K
DL-4
0EX5
20
- KDL
-40E
X523
- K
DL-4
6EX5
20
BV -
H H
arne
ssH-
B
NC fo
r the
follo
wing
Eur
ope
m
odel
s on
ly.NC
- KDL
-32E
X520
NC- K
DL-3
2EX5
23NC
- KDL
-40E
X520
- KDL
-40E
X523
- KDL
-46E
X520
H o2.
0ch:
4pin
0-8
44-4
26-0
1 JS
T PB
B-Bo
ard
G-B
Har
ness
G-B
LS
oard
JAM
3pi
n St
raig
htG
ND1
40N
MO
TIO
N_SE
NS2
38N
REG
+5V
339
N1-
821-
130-
11
GND
137
POW
ER_I
NT2
35KE
Y13
361-
822-
693-
11
STBY
+3.3
V1
33so
r/OPT
_Sen
sor
GND
231
LED_
REC
329
LED_
STBY
427
LED_
TIM
ER5
25LE
D_PO
WER
628
LED_
PIC_
MUT
E7
30DE
VICE
_SDA
/GND
8NC
DEVI
CE_S
CL/L
ED_B
DR9
NCO
PT_S
ENS
1032
VD+3
.3V
1134
SIRC
S12
261-
821-
139-
11
40"
& 4
6" o
nly)
GND
120
WIF
I VCC
223
WIF
I USB
_P3
19W
IFI U
SB_M
421
WIF
I GND
518
SM05
B-G
HS-T
B1-
819-
334-
11
L+ (F
aste
n #
187)
11
L- (F
aste
n #1
10)
22
R- (F
aste
n #
110)
23
R+ (F
aste
n #
187)
14
Appe
ndix
_SP_
Conn
ecto
r ]
CN62
01(4
0",4
6" G
E3)
CN67
04 (3
7"32
" GE2
A)SJ
M20
-28W
LBTo
B b
oard
(100
106)
T-CO
N_Vc
c12V
28NC
GND
27NC
T-CO
N_VC
C12V
26NC
GND
25NC
T-CO
N_VC
C_12
V To
B24
1G
ND23
NCBD
R_AS
U_12
V22
NCG
ND21
NCBD
R_AS
U_12
V20
NCG
ND19
NCRE
G12
V18
2G
ND17
4RE
G12
V16
3G
ND15
5AU
_12V
148
AU_G
ND13
6AU
_12V
129
AU_G
ND11
7ST
BY3.
3V10
10G
ND9
1T-
CON_
ON
83
AC_O
FF_D
ET7
9BL
_ERR
67
BL O
N5
6DC
_DIM
MER
44
PFC_
ON
32
PWM
_DIM
MER
25
POW
ER_O
N1
8
To L
SG
E3)
+OUT
11
GE2
A)NO
N2
+OUT
33
NON
4M
OLE
X L
4P
1-82
2-35
9-11
To L
SG
E3)
-OUT
11
GE2
A)NO
N2
-OUT
33
NON
4NC
5
MO
LEX
L 5
P1-
822-
360-
11
AC_I
N
Cord
AC-N
11
AC-L
22
CN60
01SF
P79-
02W
LB J
AM1-
822-
908-
11
STBY
3.3V
11
boar
dRS
232_
RXD
22
RS23
2_TX
D3
3SI
RCS_
IN4
4SI
RCS_
OUT
55
GND
66
CN10
118
2018
311
con on ard
dule
oard
dule
67
HMS3
B
Mot
ion
Sens
or3a
-X/V
/2P-
1/2
SW m
odul
eAL
L
LED/
IR/R
GB
Sen
2b-3
3a-V
3a-2
P-1
P-2 (U
S 32
",
SPEA
KER
Fron
tLc
h
SPEA
KER
Fron
tRc
h Refe
r to
Shee
t [ A
CN66
01(4
0",4
6" G
CN67
01 (3
7"32
" G
CN66
02(4
0",4
6" G
CN67
02 (3
7"32
" G
Pow
er C
R3 o
r RU
b
T-c
Opti
B-Bo
a
SW M
od
HLR2
Bo
Wifi
mod
51pin
FFC
GE2A BOARD BAT-V BOARD
HLR2 BOARD HMS3 BOARDT-Con
R3 BOARD
5-4.CIRCUIT BOARD LOCATION
Diagrams
5-4-1. KDL-22EX420, 22EX423 5-4-2. KDL-26EX420, 26EX423
5-4-5. KDL-46EX520/ 46EX5235-4-4. KDL-40EX520/ 40EX523
5-4-3. KDL-32EX420, 32EX520, 32EX523
BAT-S BOARDG1A BOARD
HLR2 BOARD HMS3 BOARDSWITCH UNIT
R3 BOARD G1B BOARDBAT-S BOARD
HLR2 BOARD HMS3 BOARD
R3 BOARD
GE3 BOARD
BAT-V BOARD
HLR2 BOARD HMS3 BOARDT-Con
R3 BOARD
SWITCH
UNIT
GE3 BOARD
BAT-V BOARD
HLR2 BOARD HMS3 BOARDT-Con
R3 BOARD
SWITCH UNITSWITCH UNIT
SWITCH
UNIT
68
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
R3 Board is for Hotel Model only
•Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
• and shaded parts are critical for safety. Replace only with part number specified.
• Parts contain confidential information. Strictly follow the instruction whenever the components are repaired and/or replaced.
•Remove screws before disassembly. Details of screws Section 6-1-2.
•Unplug connectors before disassembly.
6-1. KDL-22EX420, 22EX4236-1-1. Disassembly, Exploded View
(*) Parts are not stocked since they are seldom required for routine service. Some delays should be anticipated when ordering these components.• Picture provided in this section might have slight difference from the actual sets.• Lines that indicate parts are shown in blue in the illustration.• The reference number besides the part description in the picture indicates the disassembly sequence.
SECTION 6DISASSEMBLY, EXPLODED VIEWS AND OTHER PARTS
9
3
2
1
8
Stand Head P (SS)
Stand Pipe L (SS)
Cover,AC (S)
Rear, Cover
Stand, Block
Stand Pipe R (SS)
Rear Cover
Bracket,
Side
Speaker
19
Speaker(30X100 MM)
13
16
Sheet Radiation (BAT-L/V)
14
Static Converter (TV) – G1A
and Bezel
25
HMS3 Mount
HLR2 Mount
13
28
Switch,
Unit23
LCD
Panel
26
24
27
Bezel (22R)
Bracket,
LCD (22)15
Sheet, Insulation (G1)
22
Power Supply Cord
10
11 Label (BAT-S MOLD SIDE)
Frenel Lens
12
4
R3 Mount
Speaker (30X100 MM)
BATS Board
18
21
H, Cover
Hinge (SS)6
5
Bracket R (Top)Bracket R (BTM)
20
17
c) Boards, Bracket, Panel
B) Boards, Bracket and
a) Stand and
Label (BAT-S MOLD REAR)
7
Clamper,Cable
!
69
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
REF.NO. PART NO. DESCRIPTION REMARK1 NOT STOCKED STAND, BLOCK 2~6
4-269-867-01 STAND, PIPE L(SS) (except 22EX420(Hong Kong, Thailand,Taiwan))
4-269-867-11 STAND, PIPE L(SS)(22EX420(Hong Kong, Thailand,Taiwan))
4-269-868-01 STAND, PIPE R(SS) (except 22EX420(Hong Kong, Thailand,Taiwan))
4-269-868-11 STAND, PIPE R(SS)(22EX420(Hong Kong, Thailand,Taiwan))
4 4-269-871-01 STAND, HEAD P(SS) (except 22EX420(Hong Kong, Thailand, Taiwan))
4-269-871-11 STAND, HEAD P(SS)(22EX420(Hong Kong, Thailand,Taiwan))
5 NOT STOCKED H,COVER6 NOT STOCKED HINGE (SS)7 4-262-708-01 CLAMPER, CABLE8 4-257-892-01 COVER, AC(S) (except 22EX420(Hong Kong,
Thailand, Taiwan))4-257-892-21 COVER, AC(S)
(22EX420(Hong Kong, Thailand,Taiwan))9 1-838-271-11 POWER-SUPPLY CORD (WITH CONN.)
(22EX420(Sogul Area, Singapore, Indonesia, Vietnam, Philippines, India, Malaysia, South Africa))
1-838-273-11 POWER-SUPPLY CORD (WITH CONN.)(22EX420 Taiwan)
1-838-279-11 POWER-SUPPLY CORD (WITH CONN.)(22EX420 Thailand)
1-838-334-12 POWER-SUPPLY CORD (WITH CONN.)(22EX423 (Nigeria, Saudi Arabia), 22EX420(Hong Kong))
1-838-794-11 POWER-SUPPLY CORD (WITH CONN.)(22EX423, 22EX420 Hong Kong))
6-1. KDL-22EX420, 22EX4236-1-1. Disassembly, Exploded View REF.NO. PART NO. DESCRIPTION REMARK
1-838-796-11 POWER-SUPPLY CORD (WITH CONN.)(22EX420(Sogul Area, Singapore, Indonesia, Vietnam, Philippines, India, Malaysia, South Africa))
1-838-798-11 POWER-SUPPLY CORD (WITH CONN.)(22EX420(Sogul Area, Singapore, Indonesia, Vietnam, Philippines, India, Malaysia, South Africa))
10 4-265-512-01 REAR COVER (22 SYR)(Except 22EX420(Hong Kong , Taiwan, Thailand))
4-265-512-11 REAR COVER (22 SYR)(22EX420 Hong Kong)4-265-512-21 REAR COVER (22 SYR) (22EX420 Taiwan)4-265-512-31 REAR COVER (22 SYR) (Hotel)
(Except 22EX420(Hong Kong , Taiwan, Thailand))4-265-512-41 REAR COVER (22 SYR) (Hotel) (22EX420 Hong
Kong)4-265-512-51 REAR COVER (22 SYR) (Hotel) (22EX420 Taiwan)4-265-512-71 REAR COVER (22 SYR) (22EX420 Thailand)4-265-512-81 REAR COVER (22 SYR) (Hotel) (22EX420 Thailand)
11 4-267-116-11 LABEL (BAT-S MOLD SIDE) (22EX420 Taiwan)4-267-117-01 LABEL (BAT-S MOLD SIDE)
(Except 22EX420(Hong Kong , Taiwan, Thailand))4-267-117-11 LABEL (BAT-S MOLD SIDE)
(22EX420 (Hong Kong, Thailand))12 4-265-038-11 LABEL(BAT-S MOLD REAR) (22EX420(Taiwan))13 1-858-591-11 SPEAKER (30X100 MM)14 1-474-283-11 STATIC CONVERTER (TV) - G1A15 NOT STOCKED SHEET, INSULATION(G1)16 4-269-368-01 BRACKET, R (TOP)17 A-1804-894-A R3 MOUNT18 A-1806-484-A BATS_I1_WXG_HK COMPL SERVICE
(22EX420 Hong Kong)A-1809-340-A BATS_I1_WXG_PA COMPL SERVICE
(Except 22EX420 (Hong Kong, Taiwan), 22EX423 (Nigeria, Saudi Arabia))
A-1809-633-A BATS_I1_WXG_TW COMPL SERVICE (22EX420 Taiwan)
A-1815-669-A BATS_I1_WXG_EA COMPL SERVICE (22EX423)
!
!
Disassembly, Exploded Views and Other Parts
70
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
!
!
!
!
!
!
6-1. KDL-22EX420, 22EX4236-1-1. Disassembly, Exploded View
REF.NO. PART NO. DESCRIPTION REMARK19 4-256-428-01 BRACKET, SIDE (22/24/26) (except 22EX420
(Hong Kong, Thailand, Taiwan))4-256-428-51 BRACKET, SIDE (22/24/26)
(22EX420(Hong Kong, Thailand,Taiwan))20 4-269-369-01 BRACKET, R (BTM)21 4-256-443-01 SHEET, RADIATION (BAT-L/V)
(/CH/B_PWB(1))22 4-256-415-01 BRACKET, LCD (22)23 1-811-320-11 LCD PANEL (LC216EXN-SDA2)24 * 1-856-184-11 FRENEL LENS (except 22EX420 (Hong
Kong, Thailand, Taiwan))* 1-856-184-21 FRENEL LENS
(22EX420(Hong Kong, Thailand,Taiwan))25 A-1792-511-A HMS3 MOUNT26 A-1792-877-A HLR2 MOUNT(B-O) (except 22EX420 (Hong
Kong, Thailand, Taiwan))A-1794-192-A HLR2 MOUNT(W-O)
(22EX420(Hong Kong, Thailand,Taiwan))27 4-266-730-01 BEZEL(22 SYR) (except 22EX420 (Hong
Kong, Thailand, Taiwan))4-266-730-31 BEZEL(22 SYR)
(22EX420(Hong Kong, Thailand,Taiwan))28 1-489-443-11 SWITCH UNIT (except 22EX420 (Hong Kong,
Thailand, Taiwan))1-489-443-51 SWITCH UNIT
(22EX420(Hong Kong, Thailand,Taiwan))
!
Disassembly, Exploded Views and Other Parts
71
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Ref Part No Description
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3
7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3
2-990-421-41 SCREW (+PSW) (M3X6)
2-580-628-01 SCREW, +BVTP S3X6 TYPE2
2-580-592-01 SCREW, +PSW M3X8
2-580-602-01 SCREW, +PSW M4X12
6-1-2. Screws6-1. KDL-22EX420, 22EX423
LCD BRACKET
LCD PANEL
Disassembly, Exploded Views and Other Parts
72
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Stand Pipe R(S)
Switch, Unit
Cover, AC
6-2. KDL-26EX420, 26EX4236-2-1. Disassembly, Exploded View
A) Stand Assy and Rear Cover Assy
Rear,Cover
B) Boards, Bracket and Speaker
1314
13
Bracket, Side
Sheet, Insulation
Loudspeaker
28
LCD Panel
23
26
24
25
27
Frenel Lens
Board
HLR 2
Bezel
Label (BAT-S Mold Side)
c) Boards, Panel, and Bezel
20
15
Static Converter – G1B
Bracket, LCD
22
9Power Cord
•Remove screws before disassembly. Details of screws Section 6-2-2.
•Unplug connectors before disassembly.
Stand Pipe L(S)
1
3
4
2
11
12
7
BATS Board18
19
6
H, Cover
Hinge (SS)
5
Bracket R (Top)16
21Bracket R (BTM)
R3 Mount17
Sheet, Radiation
Label (BAT-S Mold Rear)
HMS3
Board
8Clamper,Cable
10
Stand Block
StandHead
Loudspeaker
Disassembly, Exploded Views and Other Parts
73
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
REF.NO. PART NO. DESCRIPTION REMARK1 NOT STOCKED STAND, BLOCK 2~62 4-269-869-01 STAND, PIPE L(S)3 4-269-870-01 STAND, PIPE R(S)4 4-269-871-01 STAND, HEAD P(SS)5 NOT STOCKED H,COVER6 NOT STOCKED HINGE (SS)7 4-257-892-01 COVER, AC(S)8 4-262-708-01 CLAMPER, CABLE9 1-838-279-11 POWER-SUPPLY CORD (WITH CONN.)
(26EX420 Thailand)1-838-278-11 POWER-SUPPLY CORD (WITH CONN.)
(26EX420 Australia)1-838-271-11 POWER-SUPPLY CORD (WITH CONN.)
(Except 26EX420 (Thailand, Australia, Taiwan, Hong Kong), 26EX423)
1-838-796-11 POWER-SUPPLY CORD (WITH CONN.)(Except 26EX420 (Thailand, Australia, Taiwan, Hong Kong), 26EX423)
1-838-798-11 POWER-SUPPLY CORD (WITH CONN.)(Except 26EX420 (Thailand, Australia, Taiwan, Hong Kong), 26EX423)
1-838-273-11 POWER-SUPPLY CORD (WITH CONN.)(26EX420 Taiwan)
1-838-334-12 POWER-SUPPLY CORD (WITH CONN.)(26EX423, 26EX420 Hong Kong)
1-838-794-11 POWER-SUPPLY CORD (WITH CONN.)(26EX423, 26EX420 Hong Kong)
10 4-265-428-51 REAR COVER(26 SYR) (Hotel) (26EX420 Hong Kong)
4-265-428-11 REAR COVER(26 SYR)(26EX420 Hong Kong)
4-265-428-61 REAR COVER(26 SYR) (Hotel) (26EX420 Taiwan)
4-265-428-21 REAR COVER(26 SYR) (26EX420 Taiwan)4-265-428-41 REAR COVER(26 SYR) (except 26EX420
(Taiwan, Hong Kong))
6-2. KDL-26EX420, 26EX4236-2-1. Disassembly, Exploded View
REF.NO. PART NO. DESCRIPTION REMARK4-265-428-01 REAR COVER(26 SYR)(except 26EX420
(Taiwan, Hong Kong))11 4-267-116-01 LABEL (BAT-S MOLD SIDE) (26EX420
Taiwan)4-267-117-01 LABEL (BAT-S MOLD SIDE)
(except 26EX420 Taiwan)12 4-265-038-01 LABEL(BAT-S MOLD REAR)
(26EX420 (Taiwan))13 1-858-591-11 LOUDSPEAKER 30X100MM14 1-474-284-11 STATIC CONVERTER (TV) - G1B15 NOT STOCKED SHEET, INSULATION(G1)16 4-269-368-01 BRACKET, R (TOP)
(Except 26EX420 Hong Kong)17 A-1804-894-A R3 MOUNT18 A-1815-669-A BATS_I1_WXG_EA COMPL SERVICE
(26EX423)A-1806-484-A BATS_I1_WXG_HK COMPL SERVICE
(26EX420 (Hong Kong))A-1809-340-A BATS_I1_WXG_PA COMPL SERVICE
(except 26EX420 (Hong Kong, Taiwan), 26EX423)
A-1809-633-A BATS_I1_WXG_TW COMPL SERVICE(26EX420 (Taiwan))
19 4-256-428-01 BRACKET, SIDE (22/24/26)20 4-269-369-01 BRACKET, R (BTM) (Except 26EX420 Hong
Kong)21 4-256-443-01 SHEET, RADIATION (BAT-L/V)
(/CH/B_PWB(1))22 4-256-415-01 BRACKET, LCD (22)23 1-811-321-11 LCD PANEL (LC260EXN-SDA2)24 * 1-856-184-11 FRENEL LENS25 A-1792-511-A HMS3 MOUNT26 A-1792-877-A HLR2 MOUNT(B-O)27 4-266-727-01 BEZEL(26 SYR)28 1-489-443-11 SWITCH UNIT
!
!
Disassembly, Exploded Views and Other Parts
74
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
!
!
!
!
!
!
!
!
6-2-2. Screws6-2. KDL-26EX420, 26EX423
LCD BRACKET
LCD PANEL
Ref Part No Description
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3
7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3
4-256-393-01 SCREW +PSW M3X6 W12
2-990-421-41 SCREW (+PSW) (M3X6)
2-580-592-01 SCREW, +PSW M3X8
2-580-602-01 SCREW, +PSW M4X12
Disassembly, Exploded Views and Other Parts
75
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Clamper,Cable
6
8
1 Stand, Block
Stand Base
Stand Head (M9)
9
6-3. KDL-32EX420, 32EX520, 32EX5236-3-1. Disassembly, Exploded View
Cover, AC
A) Stand and Rear Cover Assy
Rear Cover (32)
B) Boards, Bracket and Speaker
16
11
12
1118
Bracket, Side
GE2A (MY) – Static Converter.
Loudspeaker
27Switch, Unit
LCD Panel (S32ESB)
BAT-V Board
20
25
23 24
26
Frenel Lens HMS3 Board
HLR2 Board
Bezel 32 (SYR)
Power Supply Cord
7
10Label (BAT-V Mold Side)
21
Panel Bracket, C
Panel Bracket, H
c) Boards, Bracket Panel and Bezel
Sheet, Insulation (G10) 19
22
•Remove screws before disassembly. Details of screws Section 6-3-2.
•Unplug connectors before disassembly.
Neck (M9)
2
3
4
Sheet Radiation (BAT-L/V)
15
Bracket R (Top)
Bracket R(BTM)
R3 Mount
13
14
17
Label (BAT-V Rear)
5
Loudspeaker
Disassembly, Exploded Views and Other Parts
76
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Disassembly, Exploded Views and Other Parts KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
REF.NO. PART NO. DESCRIPTION REMARK8 4-265-034-01 LABEL(BAT-V REAR) (32EX520 Taiwan)9 4-265-053-01 LABEL(BAT-V MOLD SIDE)
REF.NO. PART NO. DESCRIPTION REMARK1 NOT STOCKED STAND, BLOCK 2 ~ 42 4-267-552-01 STAND, BASE(M2)
6-3. KDL-32EX420, 32EX520, 32EX5236-3-1. Disassembly, Exploded View
( )(Except 32EX520 Taiwan)
4-265-081-01 LABEL(BAT-V MOLD SIDE)(32EX520 Taiwan)10 1-858-590-11 LOUDSPEAKER11 1-474-277-22 STATIC CONVERTER(TV) - GE2A12 4-269-368-01 BRACKET, R (TOP) (Except 32EX520 Iran)13 4 269 369 01 BRACKET R (BTM) (E t 32EX520 I )
, ( )3 4-259-177-01 NECK(M9)4 4-267-492-01 STAND, HEAD(M9)5 4-259-168-01 COVER, AC(M)6 4-262-708-01 CLAMPER, CABLE7 1-838-271-11 POWER-SUPPLY CORD (WITH CONN.)
(E t (32EX420 32EX520) (T i!
!
13 4-269-369-01 BRACKET, R (BTM) (Except 32EX520 Iran)14 4-256-443-01 SHEET, RADIATION (BAT-L/V)15 4-258-700-01 BRACKET,SIDE(BAT-V MOLD 32/37)16 A-1804-894-A R3 MOUNT (Except 32EX520 Iran)17 A-1803-702-B BATV_I1_F_PA_DX COMPL SERVICE
(except (32EX420, 32EX520 (Hong Kong,
(Except (32EX420, 32EX520) (Taiwan, Australia, New Zealand, Thailand))
1-838-273-11 POWER-SUPPLY CORD (WITH CONN.)(32EX520 Taiwan)
1-838-278-11 POWER-SUPPLY CORD (WITH CONN.)(32EX420 (Australia, New Zealand), 32EX520
!
!( p ( , ( g g,Taiwan), 32EX523 (Nigeria, Saudi Arabia)))
A-1805-360-B BATV_I1_F_HK COMPL SERVICE(32EX520 Hong Kong)
A-1806-295-B BATV_I1_F_TW COMPL SERVICE(32EX520 Taiwan)
A 1806 554 B BATV I1 W PA COMPL SERVICE (32EX420)
( ( , ),(Australia, New Zealand))
1-838-279-11 POWER-SUPPLY CORD (WITH CONN.)(32EX420 Thailand, 32EX520 Thailand)
1-838-334-12 POWER-SUPPLY CORD (WITH CONN.)(32EX520 Hong Kong, 32EX523 (Nigeria, Saudi Arabia))
!
!
A-1806-554-B BATV_I1_W_PA COMPL SERVICE (32EX420)A-1807-399-B BATV_I1_F_E15_DX COMPL SERVICE
(32EX523 (Nigeria, Saudi Arabia))18 4-268-446-01 SHEET, INSULATION(G10)19 1-811-323-11 LCD PANEL (LTY[Z]320AN02-A02)
(32EX420)
Saudi Arabia))1-838-794-11 POWER-SUPPLY CORD (WITH CONN.)
(32EX520 Hong Kong, 32EX523 (Nigeria, Saudi Arabia))
1-838-796-11 POWER-SUPPLY CORD (WITH CONN.)(Except (32EX420, 32EX520) (Taiwan,
!
!
!( )
1-811-324-12 LCD PANEL (LTY[Z]320HN01-002)(Except 32EX420)
20 4-256-391-01 BRACKET, PANEL C21 4-256-392-01 BRACKET, PANEL (H)22 * 1-856-184-11 FRENEL LENS23 A 1792 511 A HMS3 MOUNT
( p ( ) (Australia, New Zealand, Thailand))
1-838-798-11 POWER-SUPPLY CORD (WITH CONN.)(Except (32EX420, 32EX520) (Taiwan, Australia, New Zealand, Thailand))
8 4-275-429-01 REAR COVER(32)(Except 32EX520 (Hong Kong Taiwan))
!!
23 A-1792-511-A HMS3 MOUNT24 A-1792-877-A HLR2 MOUNT(B-O)25 4-266-721-01 BEZEL 32 (SYR)26 1-489-443-11 SWITCH UNIT
(Except 32EX520 (Hong Kong, Taiwan))4-275-429-11 REAR COVER(32)
(32EX520 (Hong Kong, Taiwan))4-275-429-41 REAR COVER(32) (Hotel)
(Except 32EX520 (Hong Kong, Taiwan))4-275-429-51 REAR COVER(32) (Hotel) (32EX520 (Hong
Kong, Taiwan))4-275-429-61 REAR COVER(32) (32EX420 Aus Easel)4-275-429-71 REAR COVER(32) (32EX420 Basic Aus)
78
Ref Part No Description
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3
7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3
4-256-393-01 SCREW +PSW M3X6 W12
2-990-421-41 SCREW (+PSW) (M3X6)
4-259-541-01 USER SCREW ST
4-268-126-01 SCREW, ORNAMENTAL M6X12
4-257-907-01 JOINT STAND
2-580-608-01 SCREW, +PSW M5X16
6-3-2. Screws6-3. KDL-32EX420, 32EX520, 32EX523
Disassembly, Exploded Views and Other Parts
78
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
8Clamper,Cable
Panel Bracket, C
6-4. KDL-40EX520, 40EX5236-4-1. Disassembly, Exploded View
Cover,H
Cover, AC
A) Stand Assy and Rear Cover Assy
Rear Cover
7
10
Neck (ML9)
6
B) Boards, Bracket and Speaker
15
11
12
11
14
Bracket, Side
Loudspeaker
28Switch, Unit
LCD Panel
BAT-V Board
21
26
2425
27
FrenelLens HMS3
Mount
Bezel (40SYR)
Power Supply Cord
9
Label (BAT-V Rear)
22Panel Bracket, H
Label,Sheet
23
13 Sheet, Insulation (G4)
Static Converter (TV) –GE3A
c) Boards, Bracket Panel and Bezel
•Remove screws before disassembly. Details of screws Section 6-4-2.
•Unplug connectors before disassembly.
Bracket R (Top)
Bracket R (BTM)
19
20
R3 Mount 18
HLR Mount
Sheet Radiation (BAT-L/V) 16
17
5
2
1
34
Stand, Block
Stand, Base
Stand, Head
Loudspeaker
Disassembly, Exploded Views and Other Parts
79
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
REF.NO. PART NO. DESCRIPTION REMARK10 4-275-419-01 REAR COVER(40)
(except 40EX520 (Hong Kong,Taiwan))4-275-419-41 REAR COVER(40) (Hotel)
(except 40EX520 (Hong Kong,Taiwan))11 1-858-592-11 LOUDSPEAKER12 1-474-287-21 STATIC CONVERTER (TV)-GE3A13 4-268-443-01 SHEET, INSULATION(G4)14 A-1807-399-B BATV_I1_F_E15_DX COMPL SERVICE
(40EX523 (Nigeria, Saudi Arabia))A-1805-360-B BATV_I1_F_HK COMPL SERVICE
(40EX520 Hong Kong)A-1803-702-B BATV_I1_F_PA_DX COMPL SERVICE
(except 40EX520 (Taiwan, Hong Kong), 40EX523 (Nigeria, Saudi Arabia))
A-1806-295-B BATV_I1_F_TW COMPL SERVICE(40EX520 Taiwan)
15 4-256-424-01 BRACKET, SIDE (BAT-V MOLD)16 4-256-443-01 SHEET, RADIATION (BAT-L/V)17 4-265-052-01 LABEL, SHEET(BAT-V MOLD SIDE)
(except 40EX520 (Taiwan))4-265-080-01 LABEL, SHEET(BAT-V MOLD SIDE)
(40EX520 Taiwan)18 A-1804-894-A R3 MOUNT (Except 40EX520 Pakistan,
40EX523 Iran)19 4-269-368-01 BRACKET, R (TOP)
(Except 40EX520 Pakistan, 40EX523 Iran)20 4-269-369-01 BRACKET, R (BTM)
(Except 40EX520 Pakistan, 40EX523 Iran)21 1-811-325-11 LCD PANEL (LTY[Z]400HM08-001)22 4-256-391-01 BRACKET, PANEL (C)23 4-256-392-01 BRACKET, PANEL (H)24 * 1-856-184-11 FRENEL LENS25 A-1792-511-A HMS3 MOUNT26 A-1792-877-A HLR2 MOUNT(B-O)27 4-266-701-01 BEZEL(40 SYR)28 1-489-443-11 SWITCH UNIT
REF.NO. PART NO. DESCRIPTION REMARK1 NOT STOCKED STAND, BLOCK 2 ~ 52 4-267-559-01 STAND, BASE(ML2)3 4-267-499-01 STAND, HEAD(ML9)4 NOT STOCKED COVER, H5 4-259-180-01 NECK(ML9)6 4-265-034-01 LABEL(BAT-V REAR)(40EX520 Taiwan)7 4-259-168-01 COVER, AC(M)8 4-262-708-01 CLAMPER, CABLE9 1-838-334-12 POWER-SUPPLY CORD (WITH CONN.)
(40EX520 Hong Kong, 40EX523 (Nigeria, Saudi Arabia))
1-838-794-11 POWER-SUPPLY CORD (WITH CONN.)(40EX520 Hong Kong, 40EX523 (Nigeria, Saudi Arabia))
1-838-279-11 POWER-SUPPLY CORD (WITH CONN.)(40EX520 Thailand)
1-838-271-11 POWER-SUPPLY CORD (WITH CONN.)(except 40EX520 (Taiwan, Australia, New Zealand, Thailand, Hong Kong), 40EX523 (Nigeria, Saudi Arabia))
1-838-796-11 POWER-SUPPLY CORD (WITH CONN.)(except 40EX520 (Taiwan, Australia, New Zealand, Thailand, Hong Kong), 40EX523 (Nigeria, Saudi Arabia))
1-838-798-11 POWER-SUPPLY CORD (WITH CONN.)(except 40EX520 (Taiwan, Australia, New Zealand, Thailand, Hong Kong), 40EX523 (Nigeria, Saudi Arabia))
1-838-278-11 POWER-SUPPLY CORD (WITH CONN.)(40EX520 (Australia, New Zealand))
1-838-273-11 POWER-SUPPLY CORD (WITH CONN.)(40EX520 (Taiwan))
10 4-275-419-11 REAR COVER(40)(40EX520 (Hong Kong,Taiwan))
4-275-419-51 REAR COVER(40) (Hotel)(40EX520 (Hong Kong,Taiwan))
6-4. KDL-40EX520, 40EX5236-4-1. Disassembly, Exploded View
!
!
!
!
!
!
!
!
!
!
Disassembly, Exploded Views and Other Parts
80
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Ref Part No Description
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-37-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-34-256-393-01 SCREW +PSW M3X6 W124-259-541-01 USER SCREW ST2-990-421-41 SCREW, (+PSW) (M3X6)4-268-126-01 SCREW, ORNAMENTAL M6X124-257-907-01 JOINT STAND2-580-608-01 SCREW, +PSW M5X164-167-964-01 SCREW, +PWTP2 4X16
6-4-2. Screws6-4. KDL-40EX520, 40EX523
Disassembly, Exploded Views and Other Parts
81
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
H, Cover
5
6
9
2
1
34
Stand, Block
Stand, Base
Stand, HeadNeck
BAT-V Board
Panel Bracket, C
6-5. KDL-46EX520, 46EX5236-5-1. Disassembly, Exploded View
Cover, AC (M)
A) Stand and Rear Cover
Rear,Cover
B) Boards and Speaker
12
11
13
11
14
Bracket, Side
Loudspeaker
28Switch,
Unit
LCD Panel
24
27
25 26
23
Fernel Lens
HMS3 Mount
HLR2 Board
Bezel (46 SYR)
Power Supply Cord
8
22Panel Bracket, H
Label,Sheet (BAT-Mold Side)
21
15Sheet, Insulation
Static Converter (TV)-GE3A
22 Panel Bracket, C
c) Boards, Panel and Bezel
Label (BAT-V Rear
•Remove screws before disassembly. Details of screws Section 6-5-2.
•Unplug connectors before disassembly.
107Clamper,Cable
Bracket R (Top)
Bracket R (BTM)
1819
20
R3 Mount
Sheet Radiation (BAT-L/V)
16
17
Loudspeaker
Disassembly, Exploded Views and Other Parts
82
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
REF.NO. PART NO. DESCRIPTION REMARK14 A-1807-399-B BATV_I1_F_E15_DX COMPL SERVICE
(46EX523 (Nigeria, Saudi Arabia))A-1806-295-B BATV_I1_F_TW COMPL SERVICE
(46EX520 Taiwan)A-1803-702-B BATV_I1_F_PA_DX COMPL SERVICE
(Except (46EX520 Taiwan, 46EX523 (Nigeria, Saudi Arabia))
15 4-268-443-01 SHEET, INSULATION(G4)16 4-256-443-01 SHEET, RADIATION (BAT-L/V)17 4-265-052-01 LABEL, SHEET(BAT-V MOLD SIDE)
((Except (46EX520 Taiwan))4-265-080-01 LABEL, SHEET(BAT-V MOLD SIDE)
(46EX520 Taiwan)18 4-269-368-01 BRACKET, R (TOP)
(Except (46EX520 Pakistan, 46EX523 Iran))19 4-269-369-01 BRACKET, R (BTM) (Except (46EX520 Pakistan,
46EX523 Iran))20 A-1804-894-A R3 MOUNT (Except (46EX520 Pakistan,
46EX523 Iran))21 4-256-392-01 BRACKET, PANEL (H)22 4-256-391-01 BRACKET, PANEL C23 4-266-697-01 BEZEL(46 SYR)24 1-811-326-11 LCD PANEL (LTY[Z]460HN02-001)25 * 1-856-184-11 FRENEL LENS26 A-1792-511-A HMS3 MOUNT27 A-1792-877-A HLR2 MOUNT(B-O)28 1-489-443-11 SWITCH UNIT
REF.NO. PART NO. DESCRIPTION REMARK1 NOT STOCKED STAND, BLOCK 2 ~ 42 4-267-563-01 STAND, BASE(L2)3 4-267-499-01 STAND, HEAD(ML9)4 NOT STOCKED H, COVER(ML9)5 4-259-183-01 NECK(L9)6 4-259-168-01 COVER, AC(M)7 4-262-708-01 CLAMPER, CABLE8 1-838-271-11 POWER-SUPPLY CORD (WITH CONN.)
(Except 46EX520 (Australia, Thailand, Taiwan), 46EX523 (Nigeria, Saudi Arabia))
1-838-796-11 POWER-SUPPLY CORD (WITH CONN.)(Except 46EX520 (Australia, Thailand, Taiwan), 46EX523 (Nigeria, Saudi Arabia))
1-838-798-11 POWER-SUPPLY CORD (WITH CONN.)(Except 46EX520 (Australia, Thailand, Taiwan), 46EX523 (Nigeria, Saudi Arabia))
1-838-278-11 POWER-SUPPLY CORD (WITH CONN.)(46EX520 Australia)
1-838-279-11 POWER-SUPPLY CORD (WITH CONN.)(46EX520 Thailand)
1-838-273-11 POWER-SUPPLY CORD (WITH CONN.)(46EX520 Taiwan)
1-838-334-12 POWER-SUPPLY CORD (WITH CONN.)(46EX523 Nigeria, Saudi Arabia)
1-838-794-11 POWER-SUPPLY CORD (WITH CONN.)(46EX523 Nigeria, Saudi Arabia)
9 4-275-412-31 REAR COVER(46) (Hotel) (Except (46EX520 Taiwan))
4-275-412-01 REAR COVER(46) (Except (46EX520 Taiwan))4-275-412-11 REAR COVER(46) (46EX520 Taiwan)4-275-412-41 REAR COVER(46) (Hotel) (46EX520 Taiwan)
10 4-265-034-01 LABEL(BAT-V REAR) (46EX520 Taiwan)11 1-858-592-11 LOUDSPEAKER12 4-256-424-01 BRACKET, SIDE (BAT-V MOLD)13 1-474-287-21 STATIC CONVERTER (TV)-GE3A
6-5. KDL-46EX520, 46EX5236-5-1. Disassembly, Exploded View
!
!
!
!
!
!
!
!
!
!
Disassembly, Exploded Views and Other Parts
83
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
Ref Part No Description
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-37-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-34-256-393-01 SCREW +PSW M3X6 W124-259-541-01 USER SCREW ST2-990-421-41 SCREW, (+PSW) (M3X6)4-268-126-01 SCREW, ORNAMENTAL M6X124-257-907-01 JOINT STAND2-580-608-01 SCREW, +PSW M5X164-167-964-01 SCREW, +PWTP2 4X16
6-5-2. Screws6-5. KDL-46EX520, 46EX523
Disassembly, Exploded Views and Other Parts
84
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
6-6. OTHER PARTS
REF NO. PART NO. DESCRIPTION6-6-1. KDL-22EX420, 22EX423
<ACCESSORIES AND PACKING>*******************************
1-569-008-33 ADAPTOR, CONVERSION 2P (22EX420 (Sogul Area, Singapore, Indonesia, Vietnam, Phillippines))
1-821-926-11 PLUG CONVERSION ADAPTOR (22EX420 South Africa)1-822-631-11 PLUG CONVERSION ADAPTOR (22EX420 India)X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (22EX420 Taiwan)A-1815-669-A BATS_I1_WXG_EA COMPL SERVICE (22EX423)A-1806-484-A BATS_I1_WXG_HK COMPL SERVICE (22EX420 Hong Kong)A-1809-340-A BATS I1 WXG PA COMPL SERVICE A-1809-633-A BATS_I1_WXG_TW COMPL SERVICE (22EX420 Taiwan)
* 4-267-400-01 CARTON, INDIVIDUAL* 4-260-858-01 CUSHION, LOWER (SYL22)* 4-260-852-01 CUSHION, UPPER (SYL22)
4-268-265-11 MANUAL, INSTRUCTION (Except 22EX420 (Taiwan, Hong Kong))
4-268-265-21 MANUAL, INSTRUCTION (22EX420 (Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, India, Thailand, Malaysia), 22EX423)
4-268-265-31 MANUAL, INSTRUCTION (22EX420 Thailand)4-266-094-11 MANUAL, INSTRUCTION (22EX420 Hong Kong)4-268-464-11 MANUAL, INSTRUCTION (22EX420 Taiwan)
<CONNECTORS>**********************
* 1-910-800-84 CONNECTOR ASSY 14P (CN6201 (G1A) - PANEL (1))* 1-910-800-86 CONNECTOR ASSY 28P
(CN6001 (BAT-S) - CN6002 (BAT-S) - CN6701 (G1A) (1))* 1-910-802-00 CONNECTOR ASSY 6P (CN9005(BAT-S)-CN001(R3)(1))* 1-838-831-11 FLEXIBLE FLAT CABLE I1 22WS (CN2000 (BAT-S) - PANEL
(1))* 1-910-800-87 HARNESS ASSY (CN9006 (BAT-S) - CN100 (HLR2) - HMS3 -
SW / CN4601 (BAT-S) - SP (1))
REF NO. PART NO. DESCRIPTION
<MISCELLANEOUS>**************************
4-159-298-01 SCREW, +PSW M4X10 (22EX420 Taiwan)2-580-602-11 SCREW, +PSW M4X12 (22EX420 (Hong Kong, Taiwan))2-580-602-01 SCREW, +PSW M4X12
(Except 22EX420 (Taiwan. Hong Kong))2-580-663-02 SCREW, WOOD 3.8X20 (22EX420 Taiwan)
<REMOTE COMMANDER>***********************************
1-489-457-11 REMOTE COMMANDER (RM-CD013) (KDL-22EX420 (Taiwan)
1-489-456-11 REMOTE COMMANDER (RM-GD020) (Except 22EX420 Taiwan)
Disassembly, Exploded Views and Other Parts
!
!!
85
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
REF NO. PART NO. DESCRIPTION
6-6-2. KDL-26EX420, 26EX423<ACCESSORIES AND PACKING>************************************************
1-569-008-33 ADAPTOR, CONVERSION 2P (26EX420 (Sogul Area, Singapore, Indonesia, Vietnam, Phillippines))
1-821-926-11 PLUG CONVERSION ADAPTOR(26EX420 South Africa)1-822-631-11 PLUG CONVERSION ADAPTOR (26EX420 India)X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (26EX420 Taiwan)
* 4-267-915-01 CARTON, INDIVIDUAL* 4-260-876-01 CUSHION, LOWER (SYL26)* 4-260-875-01 CUSHION, UPPER (SYL26)
4-268-265-11 MANUAL, INSTRUCTION(except 26EX420 (Hong Kong, Taiwan)
4-268-265-21 MANUAL, INSTRUCTION (26EX420 (Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, Malaysia), 26EX423)
4-268-265-31 MANUAL, INSTRUCTION (26EX420 Thailand)4-266-094-11 MANUAL, INSTRUCTION (26EX420 Hong Kong)4-268-464-11 MANUAL, INSTRUCTION (26EX420 Taiwan)
<CONNECTORS>*************************
* 1-910-800-94 CONNECTOR ASSY 14P (CN6201 (G1B) - PANEL (1))* 1-910-800-95 CONNECTOR ASSY 28P* 1-910-802-00 CONNECTOR ASSY 6P (CN9005(BAT-S)-N001(R3)(1))* 1-838-832-11 FLEXIBLE FLAT CABLE I1 26WS
(CN2000 (BAT-S) - PANEL (1))* 1-910-800-96 HARNESS ASSY
6-6. OTHER PARTS
REF NO. PART NO. DESCRIPTION
<MISCELLANEOUS>*************************
4-159-298-01 SCREW, +PSW M4X102-580-663-02 SCREW, WOOD 3.8X20
<REMOTE COMMANDER>**********************************
1-489-457-11 REMOTE COMMANDER (RM-CD013) (26EX420 Taiwan)
1-489-456-11 REMOTE COMMANDER (RM-GD020)(except 26EX420 Taiwan)
Disassembly, Exploded Views and Other Parts
!
!!
86
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
REF NO. PART NO. DESCRIPTION
<CONNECTORS>**********************
* 1-910-801-03 CONNECTOR ASSY 28P(CN6001 (BAT-V) - CN6002 (BAT-V) - CN6704 (GE2A) (1))
* 1-910-802-00 CONNECTOR ASSY 6P (CN9005 (BAT-V) - CN001 (R3/RU) (1)) (Except 32EX520 Iran)
1-838-883-11 FLEXIBLE FLAT CABLE I1 32S(CN2001 (BAT-V) - PANEL (1))(Except 32EX420)
* 1-838-833-11 FLEXIBLE FLAT CABLE I1 32WS (CN2000 (BAT-V) - PANEL (1)) (32EX420)
* 1-910-801-07 HARNESS ASSY (CN9006 (BAT-V) - CN100 (HLR2) - HMS3 - SW / CN4601 (BAT-V) - SP (1))
<MISCELLENEOUS>*************************
4-188-302-11 HEX WRENCH4-159-298-01 SCREW, +PSW M4X10(32EX520 Taiwan, 32EX420)2-580-663-02 SCREW, WOOD 3.8X20 (32EX520 Taiwan)4-100-136-01 SHEET (CORE), C (32EX523 (Iran))7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-32-580-592-01 SCREW, +PSW M3X8
<REMOTE COMMANDER>**********************************
1-489-457-11 REMOTE COMMANDER (RM-CD013) (32EX520 Taiwan)1-489-456-11 REMOTE COMMANDER (RM-GD020)(Except 32EX520
Taiwan)
6-6. OTHER PARTS
REF NO. PART NO. DESCRIPTION6-6-3. KDL-32EX420, 32EX520, 32EX523
<ACCESSORIES AND PACKING>*************************************
1--569-088-33 ADAPTOR, CONVERSION 2P((32EX420, 32EX520) (Sogul Area, Singapore, Indonesia, Vietnam, Philippines))
1-822-631-11 PLUG CONVERSION ADAPTOR ((32EX420, 32EX520) India)
1-821-926-11 PLUG CONVERSION ADAPTOR (32EX520 South Africa)X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (32EX520 Taiwan)
* 4-261-808-02 BAG, PROTECTION (1100X850) (32EX420)X-2549-819-1 BAG, SCREW ASSY(M)
* 4-267-917-11 CARTON, INDIVIDUAL (32EX523 Iran)* 4-267-917-01 CARTON, INDIVIDUAL
(Except (32EX420, 32EX420 Australia Easel, 32EX523 * 4-267-916-01 CARTON, INDIVIDUAL (32EX420)* 4-269-552-01 CARTON, INDIVIDUAL (32EX420 Australia Easel)* 4-260-881-01 CUSHION, LOWER (SYL32)(Except 32EX420 Australia
Easel)* 4-270-461-01 CUSHION, LOWER (SYL32P) (32EX420 Australia Easel)* 4-260-880-01 CUSHION, UPPER (SYL32) (Except 32EX420 Australia
Easel)* 4-270-460-01 CUSHION, UPPER (SYL32P)(32EX420 Australia Easel)
4-268-265-11 MANUAL, INSTRUCTION(Except 32EX520 (Taiwan, Hong Kong, Iran))
4-268-265-21 MANUAL, INSTRUCTION ((32EX420, 32EX520)(Sogul Area, Singapore, Indonesia, Vietnam, Philippines, Malaysia), 32EX523 (Saudi Arabia, Nigeria))
4-268-265-31 MANUAL, INSTRUCTION ((32EX420, 32EX520) Thailand)4-266-094-11 MANUAL, INSTRUCTION (32EX520 Hong Kong)4-268-464-11 MANUAL, INSTRUCTION (32EX520 Taiwan)4-274-108-11 MANUAL, INSTRUCTION (32EX523 Iran)
Disassembly, Exploded Views and Other Parts
!
!
!
87
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
6-6. OTHER PARTS
REF NO. PART NO. DESCRIPTION6-6-4. KDL-40EX520, 40EX523
<ACCESSORIES AND PACKING>************************************************
1-569-008-33 ADAPTOR, CONVERSION 2P (40EX520 (Sogul Area, Singapore, Indonesia, Vietnam, Phillippines)
1-821-926-11 PLUG CONVERSION ADAPTOR (40EX520 South Africa)1-822-631-11 PLUG CONVERSION ADAPTOR (40EX520 India)X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (40EX520 Taiwan)X-2549-819-1 BAG, SCREW ASSY(M)
* 4-267-918-01 CARTON, INDIVIDUAL (Except 40EX523 Iran)* 4-267-918-21 CARTON, INDIVIDUAL (40EX523 Iran)* 4-260-887-01 CUSHION, LOWER (SYL40)* 4-260-886-01 CUSHION, UPPER (SYL40)
4-268-265-11 MANUAL, INSTRUCTION(Except (40EX520 (Taiwan, Hong Kong), 40EX523 Iran))
4-268-265-21 MANUAL, INSTRUCTION(40EX520 (Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, Malaysia),40EX523 (Saudi Arabia, Nigeria))
4-268-265-31 MANUAL, INSTRUCTION (40EX520 Thailand)4-266-094-11 MANUAL, INSTRUCTION (40EX520 Hong Kong)4-268-464-11 MANUAL, INSTRUCTION (40EX520 Taiwan)4-274-108-11 MANUAL, INSTRUCTION (40EX523 Iran)
<CONNECTORS>*************************
* 1-910-801-57 CONNECTOR ASSY 28P(CN6001 (BAT-V) - CN6002 (BAT-V) - CN6201 (GE3A) (1))
* 1-910-802-00 CONNECTOR ASSY 6P(CN9005 (BAT-V/L) - CN001 (R3/RU) (1))
* 1-838-881-11 FFC CABLE I1 40S (CN2001 (BAT-V) - PANEL (1))* 1-910-801-62 HARNESS ASSY
(CN9006 (BAT-V) - CN100 (HLR2) - HMS3 - SW / CN4601 (BAT-V) - SP (1))
REF NO. PART NO. DESCRIPTION
<MISCELLANEOUS>*****************************
4-188-302-11 HEX WRENCH4-159-298-01 SCREW, +PSW M4X10 (40EX520 Taiwan)2-580-608-01 SCREW, +PSW M5X162-580-663-02 SCREW, WOOD 3.8X20 (40EX520 Taiwan)4-100-136-01 SHEET (CORE), C (40EX523 Iran)
<REMOTE COMMANDER>***************************************
1-489-457-11 REMOTE COMMANDER (RM-CD013) (40EX520 Taiwan)1-489-456-11 REMOTE COMMANDER (RM-GD020)
(except 40EX520 Taiwan)
Disassembly, Exploded Views and Other Parts
!
!!
88
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
REF NO. PART NO. DESCRIPTION
<MISCELLANEOUS>*****************************
4-188-302-11 HEX WRENCH4-159-298-01 SCREW, +PSW M4X10 (46EX520 Taiwan)2-580-663-02 SCREW, WOOD 3.8X20 (46EX520 Taiwan)7-685-646-79 SCREW +BVTP 3X8 TYPE2 4-100-136-01 SHEET (CORE), C (46EX520 Pakistan, 46EX523 Iran)
<REMOTE COMMANDER>***************************************
1-489-457-11 REMOTE COMMANDER (RM-CD013) (46EX520 Taiwan)1-489-456-11 REMOTE COMMANDER (RM-GD020)
(except 46EX520 Taiwan)
6-6. OTHER PARTS
REF NO. PART NO. DESCRIPTION6-6-5. KDL-46EX520, 46EX523
<ACCESSORIES AND PACKING >************************************************
1-569-008-33 ADAPTOR, CONVERSION 2P (46EX520 (Sogul Area, Singapore, Indonesia, Vietnam, Phillippines))
1-821-926-11 PLUG CONVERSION ADAPTOR (46EX520 South Africa)1-822-631-11 PLUG CONVERSION ADAPTOR (46EX520 India)X-2580-498-1 BAG ASSY, FALL LOCK BELT M4X10 (46EX520 Taiwan)X-2560-379-1 BAG, SCREW ASSY(L)
* 4-267-919-01 CARTON, INDIVIDUAL(Except 46EX523 Iran) .
* 4-267-919-21 CARTON, INDIVIDUAL (46EX523 Iran)* 4-260-890-01 CUSHION, LOWER (SYL46) * 4-260-889-01 CUSHION, UPPER (SYL46)
4-268-265-11 MANUAL, INSTRUCTION (Except (46EX520 Taiwan, 46EX523 Iran))
4-268-265-21 MANUAL, INSTRUCTION (40EX520 (Sogul Area, Singapore, Indonesia, Vietnam, Phillippines, Malaysia),40EX523 (Saudi Arabia, Nigeria))
4-268-265-31 MANUAL, INSTRUCTION (46EX520 Thailand)4-268-464-11 MANUAL, INSTRUCTION (46EX520 Taiwan)4-274-108-11 MANUAL, INSTRUCTION (46EX523 Iran)
<CONNECTORS>*************************
* 1-910-801-67 CONNECTOR ASSY 28P(CN6001 (BAT-V) - CN6002 (BAT-V) - CN6201 (GE3A) (1))
* 1-910-802-00 CONNECTOR ASSY 6P (CN9005 (BAT-V/L) - CN001 (R3/RU) (1))(Except 46EX523)
* 1-838-880-11 FFC WITH CONNECTOR I1 46S(CN2001(BAT-V)-PANEL(1))
* 1-910-801-73 HARNESS ASSY (CN9006 (BAT-V) - CN100 (HLR2) - HMS3 - SW / CN4601 (BAT-V) - SP (1))
English©2011.019-888-126-01
Sony CorporationSony EMCS (Malaysia) Sdn. Bhd.
TVEG
89
Disassembly, Exploded Views and Other Parts
!
!!
KDL- 22, 26 EX420, 32,40,46 EX520RM-GD020, CD013
KDL- 22 EX423, 26 EX423, 32 EX420, 32, 40, 46 EX523RM-GD020
g _ ( ) _
4-268-265-12(1)
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
LCD Digital Colour TVOperating Instructions
Getting Started
Using Your BRAVIA TV
Network Setup
Additional Information
KDL-55EX723 / 55EX720 / 46EX723 / 46EX720 / 46EX523 / 46EX520 / 46CX523 / 46CX520 / 40EX723KDL-40EX720 / 40EX523 / 40EX520 / 40CX523 / 40CX520 / 32EX723 / 32EX720 / 32EX523 / 32EX520KDL-32EX420 / 32CX523 / 32CX520 / 26EX423 / 26EX420 / 22EX423 / 22EX420
GB01COV.book Page 1 Wednesday, December 15, 2010 1:22 PM
2 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
IntroductionThank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.
~
• Instructions about “Installing Wall Mount Bracket” are included within this TV’s instructions manual.
• The illustrations used in this manual are of the KDL-40EX520 series unless otherwise state.
• The illustrations of the remote control used in this manual are of the RM-GD019 unless otherwise stated.
• Before operating the TV, please read “Safety Information” (page 31). Retain this manual for future reference.
Trademark information is a registered trademark of the DVB
Project.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
DLNA® and DLNA CERTIFIED® are trademarks and/or service marks of Digital Living Network Alliance.
DivX® is a video file compression technology, developed by DivX, Inc.
DivX®, DivX Certified®, and associated logos are trademarks of DivX, Inc. and are used under license.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
“BRAVIA” and are trademarks of Sony Corporation.
TrackID is a trademark or registered trademark of Sony Ericsson Mobile Communications AB.
Music and video recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000-present Gracenote. Gracenote Software, copyright © 2000-present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a nonexhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.
Notes for Australia and New Zealand modelThis product is ENERGY RATING qualified in the “Home” mode. ENERGY RATING is a program designed to promote energy efficient products and practices.
• When the TV is initially set up, it is designed to meet ENERGY RATING requirements while maintaining optimum picture quality.
• Changes to certain features, settings, and functionalities of this TV (e.g. TV Guide, Picture/Sound, Eco-Setting) can slightly change the power consumption.
Depending upon such changed settings (e.g. “Shop” mode), the power consumption may vary which possibly could exceed the stated energy rating.
To reset the TV to ENERGY RATING qualified settings, select “Home” mode from the initial set-up procedure in “Factory Settings” under the “Set-up” menu.
IMPORTANT INFORMATIONIf a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
Notice for customers in the South AfricaThe Euro/South Africa converter plug should be fitted as follows.
1 Insert the power supply or CEE7 plug in to the converter plug.
2 Use an appropriate screwdriver to attach the screw tightly without damaging the screw head.
3 TEST: Grip the converter plug, and pull the VDE cord set/transformer to ensure it is fully secure, if not then increase the torque setting and further tighten.Re-test.
The converter plug is now ready for use.
GB01COV.book Page 2 Wednesday, December 15, 2010 1:22 PM
3 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Notice for customers in IndiaAttach the supplied plug adaptor.
Location of the identification labelLabels for Model No. and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV.
Precautions
Viewing the TV• Some people may experience discomfort
(such as eye strain, fatigue, or nausea) while watching 3D video images or playing 3D video games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing 3D video games. The length and frequency of necessary breaks will vary from person to person. You must decide what works best. If you experience any discomfort, you should stop watching the 3D video images or playing 3D video games until the discomfort ends; consult a doctor if you believe necessary. You should also review (i) the instruction manual of any other device or media used with this television and (ii) our website (http://www.sony-asia.com/support) for the latest information. The vision of young children (especially those under six years old) is still under development. Consult your doctor (such as a pediatrician or eye doctor) before allowing young children to watch 3D video images or play 3D video games. Adults should supervise young children to ensure they follow the recommendations listed above.
• When using the simulated 3D function, please note that the displayed image is modified from the original due to the conversion done by this television.
• View the TV in moderate light, as viewing the TV in poor light or during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid excessive levels, as hearing damage may result.
LCD Screen• Although the LCD screen is made with
high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD screen and is not a malfunction.
• Do not push or scratch the front filter, or place objects on top of this TV set. The image may be uneven or the LCD screen may be damaged.
• If this TV set is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena disappear as the temperature rises.
• Ghosting may occur when still pictures are displayed continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in use. This is not a malfunction.
• The LCD screen contains a small amount of liquid crystal. Some fluorescent tubes used in this TV set also contain mercury. Follow your local ordinances and regulations for disposal.
Handling and cleaning the screen surface/cabinet of the TV setBe sure to unplug the AC power cord connected to the TV set from AC power outlet before cleaning.
To avoid material degradation or screen coating degradation, observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution.
• Do not spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts, and may cause a malfunction.
• Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material.
• Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
• When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand.
Optional EquipmentKeep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur.
(Caution about handling the remote control)Notes• Observe the correct polarity when
inserting batteries.• Do not use different types of batteries
together or mix old and new batteries.• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.
• Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.
Disposal of the TV set (Australian model only)
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems)This symbol is on the remote control.
GB01COV.book Page 3 Wednesday, December 15, 2010 1:22 PM
4 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Getting StartedChecking the accessories ........................................................................................................6
Inserting batteries into the remote............................................................................................ 6
1: Attaching the Table-Top Stand ............................................................................................7
2: Adjusting the viewing angle of the TV..................................................................................8
3: Connecting an antenna/cable/VCR......................................................................................9
4: Connecting audio/video devices ........................................................................................10
5: Preventing the TV from toppling over.................................................................................10
6: Organizing the AC power cord/Bundling the cables...........................................................10
7: Performing the initial set-up ...............................................................................................11
Using Your BRAVIA TVWatching the TV.....................................................................................................................12
Selecting various functions and settings (Home Menu) .........................................................14
Displaying Operating Instructions (i-Manual) .........................................................................16
Network SetupPreparing a wired network .....................................................................................................18
Preparing a wireless LAN.......................................................................................................18
Setting up the Internet connection .........................................................................................19
If you cannot connect to the Internet......................................................................................20
Adjusting the server display settings......................................................................................20
Additional InformationTroubleshooting .....................................................................................................................22
Specifications .........................................................................................................................23
Installing the Accessories (Wall-Mount Bracket)....................................................................25
Safety Information ..................................................................................................................31
Table of Contents
GB01COV.book Page 4 Wednesday, December 15, 2010 1:22 PM
5 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
This TV has a built-in manual (i-Manual).To access the i-Manual, press i-MANUAL on the remote, and select an item. For details, see page 16 of this manual. Contents of the i-Manual may differ depending on the model/region/area.
Contents of the i-Manual
After setting up your BRAVIA TV and learning basic operations with this manual, see the built-in manual (i-Manual) for further explanation of the features of your TV.
How to Use i-Manual
“BRAVIA” TV Features3D FeaturePresence Sensor“BRAVIA” Internet VideoInternet WidgetsWireless LAN Ready“BRAVIA” Sync with “Control for HDMI”TrackID™/Music Search/Video Search
Watching TV3D FeatureDigital Electronic Programme GuideProgramme Guide for Digital TextFavouritesWide ModePicture ModeTextPhotos/Music/VideosTwin Picture (PIP)Twin Picture (P&P)
Settings/Home MenuAbout the Home MenuSettingsDisplaySoundSystem Settingsi-ManualDigital Set-upAnalogue Set-upExternal InputsNetworkProduct Support
Using Other Equipment/InternetVCR/DVD PlayerAudio SystemUSB Device (e.g. Digital Camera)Picture FrameHDMI EquipmentInternet/Wireless LANHome NetworkPCProgramming the Remote
Parts DescriptionRemoteTV Controls and IndicatorsTerminals
Troubleshooting
Index
Bookmarks
GB01COV.book Page 5 Wednesday, December 15, 2010 1:22 PM
6 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Checking the accessoriesRemote (1)Size AAA batteries (R3 type) (2)Table-Top Stand (1)*1
Fixing screws for Table-Top Stand (M4 × 12) (2) (for KDL-26/22EX42x)Fixing screws for Table-Top Stand (M5 × 16) (3) (for KDL-55/46/40/32EX72x, KDL-46/40/32EX52x, KDL-46/40/32CX52x, KDL-32EX420)Assembling screws for Table-Top Stand (M4 × 12) (2) (for KDL-26/22EX42x)Assembling screws for Table-Top Stand (M5 × 16) (2) (for KDL-32EX420 (Australia model))Assembling screws for Table-Top Stand (M6 × 14) (4) (for KDL-55/46EX72x, KDL-46EX52x, KDL-46CX52x)Assembling screws for Table-Top Stand (M6 × 14) (3) (for KDL-40/32EX72x, KDL-40/32EX52x, KDL-40/32CX52x, KDL-32EX420 (except Australia model))Hexagon wrench (1) (except KDL-32EX420 (Australia model), KDL-26/22EX42x)Operating Instructions (this manual) and other documents
*1 Assemble the Table-Top Stand with the supplied assembling screws. Refer to the supplied Table-Top Stand leaflet to assemble the stand.
Inserting batteries into the remoteB KDL-55/46/40/32EX723 and
KDL-55/46/40/32EX720
1 Remove the protection sheet.
2 Push and slide the cover upward.
B KDL-46/40/32EX523, KDL-46/40/32EX520, KDL-46/40/32CX523, KDL-46/40/32CX520, KDL-26/22EX423 and KDL-32/26/22EX420
1 Remove the protection sheet.
2 Push and lift the cover to open.
Getting Started
GB01COV.book Page 6 Wednesday, December 15, 2010 1:22 PM
7 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Gettin
g S
tarted1: Attaching the Table-Top
Stand
1 Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models.
2 Place the TV set on the Table-Top Stand.B KDL-55/46/40/32EX723,
KDL-55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520, KDL-46/40/32CX523, KDL-46/40/32CX520 and KDL-32EX420 (except Australia model)
B KDL-32EX420 (Australia model)
~
• Align the TV from the top, slide it in until the guide pins cannot be seen.
B KDL-26/22EX423 and KDL-26/22EX420
3 Fix the TV to the Table-Top Stand according to the arrow marks that guide the screw holes using the supplied screws.
B KDL-55/46/40/32EX723, KDL-55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520, KDL-46/40/32CX523, KDL-46/40/32CX520 and KDL-32EX420 (except Australia model)
B KDL-32EX420 (Australia model)
B KDL-26/22EX423 and KDL-26/22EX420
~
• If using an electric screwdriver, set the torque at approximately 15 kgf·cm {1.5 N·m}.
Detaching the Table-Top Stand from the TVTo detach the Table-Top Stand from the TV, remove the screws fixed in step 3.
~
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV.
• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.
Guide pins
Guide pins
GB01COV.book Page 7 Wednesday, December 15, 2010 1:22 PM
8 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
2: Adjusting the viewing angle of the TV
This TV can be adjusted within the angles as illustrated.
Angle adjustment (Swivel)(except KDL-26/22EX42x)~
• When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over.
B Except KDL-32EX420 (Australia model)
B KDL-32EX420 (Australia model)
Angle adjustment (Tilt)(except KDL-46/40/32CX523/KDL-46/40/32CX520)~
• Be careful not to pinch your fingers between the TV and stand when adjusting the angle.
B KDL-55/46/40/32EX723, KDL-55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520 and KDL-32EX420 (except Australia model)
B KDL-26/22EX423 and KDL-26/22EX420
B KDL-32EX420 (Australia model)
~
• Ensure that there are no objects in front of the TV.
• Do not expose the Presence Sensor to direct sunlight or other strong light, as malfunction may occur.
20°
20°
20°
20°
15°
15°
15°
15°
0° - 6°
0° - 6°
6°
0°
Presence Sensor
3D Sync Transmitter (KDL-55/46/40/32EX72x only)
IR Sensor
GB01COV.book Page 8 Wednesday, December 15, 2010 1:22 PM
9 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Gettin
g S
tarted3: Connecting an antenna/
cable/VCR
Connecting an antenna/cable
Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI
Connecting an antenna/cable and VCR
Antenna cable (not supplied)
Set Top Box/recorder (e.g. DVD recorder)
Antenna cable (not supplied)
Antenna cable (not supplied)
AV cable (not supplied)
VCR
GB01COV.book Page 9 Wednesday, December 15, 2010 1:22 PM
10 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
4: Connecting audio/video devices
5: Preventing the TV from toppling over
1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand.
2 Install a machine screw (M4 × 10, not supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine screw with a strong cord (not supplied).
6: Organizing the AC power cord/Bundling the cables
B KDL-46/40/32CX52x
B Except KDL-46/40/32CX52x
~
• Before bundling the cables, remove the cable holder from the AC cover (see step 1 and 2). Reuse the cable holder (see step 3) to bundle the other cables (see step 4).
• Do not bundle the AC power cord together with other cables.
DVD Player
AV cable (not supplied)
Antenna cable (not supplied)
Antenna cable (not supplied)
AC power cord
GB01COV.book Page 10 Wednesday, December 15, 2010 1:22 PM
11 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Gettin
g S
tarted
* When installing on the wall, attach the cable holder under the terminals.
7: Performing the initial set-up
1 Connect the TV to your AC power outlet (mains socket).
2 Press 1 on the TV. The " (power) indicator will light green.When you switch on the TV for the first time, the Language menu appears on the screen.
~
• When you turn on the TV for the first time, the TV requires some internal processing for optimization before you can perform the initial setup. There will be no picture and sound, and the timer indicator on the front of the TV blinks orange for about 40 seconds. Do not turn off the TV during this process. This process has been completed at the factory on some TVs.
Follow the instructions on the screen.
Programme Sorting: Changes the order of analogue channels stored in the TV.
1 Press F/f to select the channel you want to move to a new position, then press .
2 Press F/f to select the new position for the channel, then press .
~• You can also tune channels manually.
*
4433
11 22
4433
11 22
4433
11 22
KDL-55/46/40/32EX723, KDL-55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520 and KDL-32EX420 (except Australia model)
KDL-32EX420 (Australia model)
KDL-26/22EX423 and KDL-26/22EX420
3
Except KDL-46/40/32CX52x
For KDL-46/40/32CX52x
GB01COV.book Page 11 Wednesday, December 15, 2010 1:22 PM
12 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Watching the TV
Using Your BRAVIA TV
1 Turn on the TV.Press 1 on the TV to turn on the TV.
2 Select a mode.
3 Select a TV channel.
To use Digital Electronic Programme GuidePress GUIDE in digital mode to display the programme guide.
Use with 0-9 to select digital channels. For channel numbers 10 and above, press the next digit quickly.
z• The number 5, N, PROG + and
AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV.
1
GUIDE
2
3
GB01COV.book Page 12 Wednesday, December 15, 2010 1:22 PM
13 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Usin
g Y
ou
r BR
AV
IA T
VParts and controls of the remoteUse the supplied remote to control your TV. Basic remote operations are explained here. For details on all of the remote function, press i-MANUAL and see the built-in manual (i-Manual) (page 16).
For KDL-55/46/40/32EX72x
Rear of Remote Control
1 :/1Press to turn the TV on and off from standby mode.
2 i-MANUALDisplays the built-in manual (i-Manual).
3 SYNC MENUDisplays the BRAVIA Sync menu to operate the BRAVIA Sync-compatible equipment that is connected to the TV.
4 F/f/G/g/Moves the on-screen cursor, and confirm the item.
5OPTIONSDisplays a list of convenient functions and menu shortcuts. The menu items vary based on the current input and/or content.
6Coloured buttonsWhen the coloured buttons are available, an operation guide appears on the screen.
7 PROG/CH +/–/Number buttonsSelect channels in the TV mode.
82 +/–Adjusts the volume.
GB01COV.book Page 13 Wednesday, December 15, 2010 1:22 PM
14 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Selecting various functions and settings (Home Menu)You can select all the features from the Home menu.See page 15 for the Home menu map.
1 Press HOME.
2 Press F/f/G/g/ to select items.
To select items in the Home menu (e.g., selecting “Settings”)
1 Press G/g to select “Settings”.The contents of “Settings” are displayed on the right.
2 Press F/f to select “Display”.3 Press to launch the menu.
According to the screen instruction, press F/f/G/g to select items and press to confirm.
3 Press HOME to exit.
2
1, 3
GB01COV.book Page 14 Wednesday, December 15, 2010 1:22 PM
15 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Usin
g Y
ou
r BR
AV
IA T
VHome menu mapAfter pressing HOME on the remote control, following icons are displayed as categories. The categories are available depending on your TV model, region, country and broadcasting conditions.
TV You can select a list of TV channels, or a programme guide.
Media You can enjoy photo/music/video content via USB devices or the home network.
Inputs You can select equipment connected to the TV.
Favourites/History Provides quick access to your frequently used and recently viewed items, such as TV channels, external inputs or your media files.
Settings Contains all of the necessary configurations to customise your TV settings.
Widgets Provides access to Widgets.
Applications You can enjoy various applications such as “Music Search”, “Internet Browser”, etc.
Qriocity Provides access to the “Qriocity” online service.
Internet Content You can enjoy Internet content services.
Recommendations Presents recommendations for programmes you may like, based on your viewing history.
GB01COV.book Page 15 Wednesday, December 15, 2010 1:22 PM
16 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Displaying Operating Instructions (i-Manual)Operating instructions are built into your BRAVIA TV and can be displayed on the screen.To learn more about your TVs features, access your i-Manual with the touch of a button.
1 Press i-MANUAL.
2 Press F/f/G/g/ to select items.
To select items in the i-Manual
1 Press F/f to select an item.The contents in the item are displayed on the right as the second layer.
2 Press g to move to the second layer.3 Press F/f to select an item from the second
layer.A digest of the item is displayed on the right.If the third layer is available, repeat this step to display the digest of the item.
4 Press g to select an item.The content is displayed.
1
2
GB01COV.book Page 16 Wednesday, December 15, 2010 1:22 PM
17 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Usin
g Y
ou
r BR
AV
IA T
VDescription of the i-Manual screen
To use the bookmarkThe i-Manual has a bookmark function. Pages can be bookmarked with coloured buttons, according to the instructions at the bottom of the screen. To access your registered bookmarks, go to the top page of the i-Manual and select “Bookmarks”.
To memorise the last displayed pagei-Manual memorises the last displayed page. When in the i-Manual screen, press i-MANUAL to return to the TV screen. If you press i-MANUAL again, the information you saw last time appears. For viewing from the top page of the i-Manual, return to the top page according to the instructions on screen, or press HOME and select “i-Manual” of “Settings” in the Home menu.
~
• Last page memory is automatically reset when you switch the TV to standby mode.
Press G to go back to the previous page
Page number/Total page number
Press RETURN to go back to the previous page
Press f to go to the next page
Press to launch the function
GB01COV.book Page 17 Wednesday, December 15, 2010 1:22 PM
18 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
When you connect this TV to the Internet, you can enjoy multiple functions: displaying a photograph that shows its location on the map, enjoying Internet video, etc. For details on the functions, refer to the i-Manual.
~
• You will need to contract with an Internet service provider to connect to the Internet.
Preparing a wired network
~
• For LAN connections, use a Category 7 cable (not supplied).
Preparing a wireless LANWireless LAN Ready lets you easily access the Internet and your home network with the USB Wireless LAN Adaptor UWA-BR100 (as of January 2010). By inserting the USB Wireless LAN Adaptor into your TV’s USB port, you can easily create a cable-free network. Before setting up the wireless LAN function of the TV, be sure to set up a wireless LAN router.
~
• The USB Wireless LAN Adaptor is available as an optional accessory, depending on your TV model.
Network Setup
TV
Internet
Modem with router functions
Router
Modem
Internet
or
GB01COV.book Page 18 Wednesday, December 15, 2010 1:22 PM
19 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Netw
ork S
etup
Setting up the Internet connectionUsing the network feature you can connect the TV to the Internet. The set-up procedure differs depending on the type of network and LAN router. Before setting up the Internet connection, be sure to set up a LAN router. Check your wireless LAN environment using the following chart.
Wireless LAN
Wired LAN , Type 4
* Type 1 is easier to set up if your router has an automatic setting button, e.g. Air Station One-Touch Secure System (AOSS). Most of the latest routers have this function. Check your router.
Type 1: Follow the configuration for “Secured Network with Wi-Fi Protected Set-up (WPS)”.Type 2: Follow the configuration for “Secured Network without Wi-Fi Protected Set-up (WPS)”.Type 3: Follow the configuration for “Unsecured Network with Any Type of Wireless LAN Router”.Type 4: Follow the configuration for “Wired network set-up”.
Type 1: Secured network with Wi-Fi protected Set-up (WPS)The WPS standard makes security of a wireless home network as straightforward as pressing the WPS button on the wireless LAN router. Before setting up a wireless LAN, check the location of the WPS button on the router and verify how to use it.
For security purpose, “WPS (PIN)” provides a PIN code for your router. PIN code is renewed every time you select “WPS (PIN)”.
1 Press HOME, then select > “Network” > “Network Set-up”.
2 Select “Wireless Set-up”.
3 Select “WPS (Push Button)” for Push Button method or “WPS (PIN)” for PIN method.~• Button name of the WPS may differ depending
on the router (e.g. AOSS button).
4 Follow the instructions on the set-up screen.
Type 2: Secured network without Wi-Fi protected Set-up (WPS)To set up a wireless LAN, SSID (wireless network name) and security key (WEP or WPA key) will be required. If you do not know them, consult the instruction manual of your router.
1 Press HOME, then select > “Network” > “Network Set-up”.
2 Select “Wireless Set-up”.
3 Select “Scan”, then select a network from the list of scanned wireless networks.
4 Follow the instructions on the set-up screen.
~
• If you use WPS for network set-up, the security settings of the wireless LAN router activate, and any equipment previously connected to the wireless LAN in a non-secure status will be disconnected from the network.In this case, activate the security settings of the disconnected equipment and then reconnect. Or, you can deactivate the security settings of the wireless LAN router, and then connect the equipment to a TV in a non-secure status.
Secure Wireless LAN? NOk Type 3
YES m
Do you use a wireless LAN router compatible with Wi-Fi Protected Set-up (WPS)?
NOk Type 2
YES mType 1*
(Continued)
GB01COV.book Page 19 Wednesday, December 15, 2010 1:22 PM
20 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Type 3: Unsecured network with any type of wireless LAN routerTo set up a wireless LAN, SSID (wireless network name) will be required.
1 Press HOME, then select > “Network” > “Network Set-up”.
2 Select “Wireless Set-up”.
3 Select “Scan”, then select a network from the list of scanned wireless networks.
4 Follow the instructions on the set-up screen.
~
• Security key (WEP or WPA key) will not be required because you do not need to select any security method in this procedure.
Type 4: Wired network set-upEnter the respective alphanumeric values for your router if necessary. The items that need to be set (e.g. IP Address, Subnet Mask, DHCP) may differ depending on the Internet service provider or router. For details, refer to the instruction manuals provided by your Internet service provider, or those supplied with the router.
1 Press HOME, then select > “Network” > “Network Set-up”.
2 Select “Wired Set-up”.
3 Select “Auto” to set the IP Address and proxy server automatically, or “Custom” to set them manually.
4 Follow the instructions on the set-up screen.
Viewing the network statusYou can confirm your network status.
1 Press HOME, then select > “Network” > “Network Set-up”.
2 Select “View Network Status”.
If you cannot connect to the InternetUse the diagnosis to check possible causes for network connection failures, and settings.
1 Press HOME, then select > “Network” > “Network Set-up”.
2 Select “View Network Status”.
3 Select “Check Connection”.This may take a several minutes. You cannot cancel the diagnosis after selecting “Check Connection”.
Adjusting the server display settingsYou can select home network servers to be displayed on the Home Menu. Up to 10 servers can be displayed in the Home Menu automatically.
1 Press HOME, then select > “Network” > “Home Network Setup”.
2 Select “Server Display Settings”.
3 Select the server you want to display on the Home Menu, and adjust the settings.
GB01COV.book Page 20 Wednesday, December 15, 2010 1:22 PM
21 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Netw
ork S
etup
If you cannot connect to your home networkThe TV detects if the server is being correctly recognised when you cannot connect it to your home network. If the diagnostic results indicate a failure, check possible causes, and network connections and settings.
1 Press HOME, then select > “Network” > “Home Network Setup”.
2 Select “Server Diagnostics”.The server diagnostic starts. When the server diagnostic is complete, the diagnostic result list appears.
GB01COV.book Page 21 Wednesday, December 15, 2010 1:22 PM
22 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Troubleshooting
When the 1 (standby) indicator is flashing, count how many times it flashes (interval time is three seconds).Press 1 on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing, check the items in the table as follows.Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by qualified service personnel.
Additional Information
Condition Explanation/Solution
There is no picture (screen is dark) and no sound.
• Check the antenna/cable connection.• Connect the TV to the AC power and press 1 on the TV.• If the 1 (standby) indicator lights up in red, press "/1.
Tiny black points and/or bright points appear on the screen.
• The screen is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction.
Some programmes cannot be tuned.
• Check the antenna or dish.
The TV turns off automatically (the TV enters standby mode).
• Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of “On Timer”.
• Check if the “Idle TV Standby” is activated.• Check if the “Presence Sensor” is activated. When no viewer is
detected in front of the TV for a preset time, the picture automatically turns off, while leaving only the TV sound on. Additionally, after 30 minutes in picture off mode, the TV will switch to standby mode.
The remote does not function.
• Replace the batteries.• Your TV may be in SYNC mode.
Press SYNC MENU, select “TV Control” and then select “Home (Menu)” or “Options” to control the TV.
The “Parental Lock” password has been forgotten.
• Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
The TV surrounds become warm.
• When the TV is used for an extended period, the TV surrounds become warm.You may feel hot when touching there by the hand.
GB01COV.book Page 22 Wednesday, December 15, 2010 1:22 PM
23 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Ad
ditio
nal In
form
ation
Specifications
System
Panel system LCD (Liquid Crystal Display) Panel
TV system Analogue: B/G, I, D/K, M, LDigital: DVB–T
Colour/video system Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)Digital: MPEG-2 MP@ML/HL, MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverage Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S01–S03, S1–S41VHF: 0–12, 5A, 9A/UHF: 28–69/CATV: S01–S03, S1–S44 (Australia)VHF: 1–11 (New Zealand)D/K: VHF: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69/M: A2–A13,
A14–A79Digital: VHF/UHF, UHF (New Zealand only)
Sound output 10 W + 10 W (KDL-55/46/40/32EX72x, KDL-46/40/32EX52x, KDL-46/40/32CX52x, KDL-32EX420)8 W + 8 W (KDL-26/22EX42x)
Input/Output jacks
Antenna (aerial)/cable 75 ohm external terminal for VHF/UHF
/ 2 COMPONENT INSupported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
2 Video input (phono jacks)
COMPONENT IN Audio input (phono jacks)
HDMI IN1, 2, 3, 4 (except KDL-26/22EX42x)
Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480iAudio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN4 only)ARC (Audio Return Channel) (HDMI IN 1 only)PC Input
HDMI IN1, 2(for KDL-26/22EX42x)
Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480iAudio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits
Analogue audio input (minijack) (HDMI IN2 only)ARC (Audio Return Channel) (HDMI IN 1 only)PC Input
1 Video input (phono jack)
1 Audio input (phono jacks)
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear PCM, Dolby Digital)
AUDIO OUT/i Audio output (phono jacks)Headphones jack
PC IN PC Input (Mini D-sub 15-pin) PC audio input (minijack)
USB port
LAN 10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.)
Model name KDL- 55EX72x 46EX72x 46EX52x 46CX52x 40EX72x 40EX52x 40CX52x
Power and others
Power requirements 110 V – 240 V AC, 50/60 Hz
Screen size (measured diagonally)
Approx. 138.8 cm/55 inches
Approx. 116.8 cm/46 inches Approx. 101.6 cm/40 inches
Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)
Power consumption Indicated on the rear of the TV
Dimensions (Approx.) (w × h × d)
with Table-Top Stand (mm) 1269 × 799 × 315
1078 × 690 × 260
1078 × 690 × 260
1122 × 712 × 275
943 × 616 × 250991 × 636
× 250
without Table-Top Stand (mm)
1269 × 769 × 41
1078 × 660 × 42
1078 × 660 × 42
1122 × 682 × 74
943 × 586 × 42991 × 606
× 71
Mass (Approx.)
with Table-Top Stand (kg) 25.4 17.9 17.8 20.7 14.4 16.3
without Table-Top Stand (kg)
20.2 14.3 14.2 17.1 11.2 12.9
Supplied accessories See “Checking the accessories” (page 6).
(Continued)
GB01COV.book Page 23 Wednesday, December 15, 2010 1:22 PM
24 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
*1 Except Australia model*2 Australia model
Design and specifications are subject to change without notice.
Optional accessories Wall-Mount Bracket: SU-WL50BUSB Wireless LAN Adaptor3D Glasses: TDG-BR250, TDG-BR200, TDG-BR100, TDG-BR50 (for KDL-55/46/40EX723,
KDL-55/46/40EX720)
Operating temperature 0 ºC – 40 ºC
Operating humidity 10 % – 80 % RH (non-condensing)
Model name KDL- 32EX72x 32EX52x 32CX52x 32EX420*1 32EX420*2 26EX42x 22EX42x
Power and others
Power requirements 110 V – 240 V AC, 50/60 Hz
Screen size (measured diagonally)
Approx. 80.1 cm/32 inches Approx. 66.1 cm/26 inches
Approx. 54.8 cm/ 22 inches
Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical) 1,366 dots (horizontal) × 768 lines (vertical)
Power consumption Indicated on the rear of the TV
Dimensions (Approx.) (w × h × d)
with Table-Top Stand (mm) 755 × 510 × 216799 × 532 ×
230755 × 510 ×
216755 × 498 ×
225631 × 421 ×
182529 × 362 ×
172
without Table-Top Stand (mm)
755 × 480 × 42799 × 502 ×
70755 × 480 ×
42755 × 482 ×
42631 × 406 ×
42529 × 347 ×
42
Mass (Approx.)
with Table-Top Stand (kg) 10.4 10.2 11.4 10.2 9.9 7.2 5.1
without Table-Top Stand (kg)
7.9 7.7 8.7 7.7 7.7 6.1 4.1
Supplied accessories See “Checking the accessories” (page 6).
Optional accessories Wall-Mount Bracket: SU-WL50B (for KDL-32EX723, KDL-32EX720, KDL- 32EX523, KDL-32EX520, KDL-32CX523, KDL-32CX520)SU-WL100 (for KDL-26/22EX423, KDL-26/22EX420)
USB Wireless LAN Adaptor3D Glasses: TDG-BR250, TDG-BR200, TDG-BR100, TDG-BR50 (for KDL-32EX723, KDL-32EX720)
Operating temperature 0 ºC – 40 ºC
Operating humidity 10 % – 80 % RH (non-condensing)
Model name KDL- 55EX72x 46EX72x 46EX52x 46CX52x 40EX72x 40EX52x 40CX52x
GB01COV.book Page 24 Wednesday, December 15, 2010 1:22 PM
25 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Ad
ditio
nal In
form
ation
Installing the Accessories (Wall-Mount Bracket)
To Customers:When using SU-WL50B and SU-WL100 Wall-Mount Bracket, the space between the wall and the TV will be 6 cm. Use this space to route cables to the TV.
For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:Provide full attention to safety during the installation, periodic maintenance and examination of this product.
Your TV can be installed using the SU-WL50B and SU-WL100 Wall-Mount Bracket (sold separately).• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.• Refer to “Detaching the Table-Top Stand from the TV” (page 7).
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
6cm
Wall
(Continued)
GB01COV.book Page 25 Wednesday, December 15, 2010 1:22 PM
26 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
SU-WL50B and SU-WL100
When installing the base bracket on the wall (for SU-WL50B):
1 Install one side of each plate to the upper bracket and the other side to the lower bracket.
2 Attach the base bracket to the wall.
3 Remove the plates. (except KDL-55EX723, KDL-55EX720)~
• Be sure to store the plates in a safe place after use.
When installing the TV on a wall, remove the screws from the rear of the TV. The screws and number of screws are available depending on the TV model (They are fastened in the screw holes for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from children.
~
• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV.
• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.
bc
cb
a
a
a b c c b a
bc
cb
a
a
× 2
× 2
× 2
× 4
B For KDL-46/40/32EX72x, KDL-46/40/32EX52x, KDL-32EX42x
B For KDL-55EX72x
Soft clothSoft cloth
GB01COV.book Page 26 Wednesday, December 15, 2010 1:22 PM
27 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Ad
ditio
nal In
form
ation
KDL-55/46/40/32EX723, KDL-55/46/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520, KDL-46/40/32CX523, KDL-46/40/32CX520 and KDL-32EX420
~
• Attach the Mounting Hook using four screws supplied with the Wall-Mount Bracket.• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original
holes on the rear of the TV.
× 4
Mounting Hook
Screw (+PSW 6 × 16)
SU-WL50B
Soft cloth
Mounting Hook
Screw (+PSW 4 × 12)
SU-WL100
Soft cloth
KDL-26/22EX423 and KDL-26/22EX420
(Continued)
GB01COV.book Page 27 Wednesday, December 15, 2010 1:22 PM
28 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Screw and Hook locations diagram/table
SU-WL50B
Model Name KDL-
Screw location Hook location
SU-WL50B SU-WL50B
55EX72x e, j b
46EX72x/46EX52x e, j b
46CX52x d, i b
40EX72x/40EX52x e, j b
40CX52x d, i b
32EX72x/32EX52x e, h c
32EX420 e, h c
32CX52x e, h c
SU-WL100
26EX42x a
22EX42x b
a b c c b a
Screw locationWhen installing the Mounting Hook on the TV.
Hook locationWhen installing the TV onto the Base Bracket.
ba
c
Mounting HookBase Bracket
GB01COV.book Page 28 Wednesday, December 15, 2010 1:22 PM
29 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Ad
ditio
nal In
form
ation
SU-WL100
TV installation dimensions table1 SU-WL50B
2 SU-WL100
Hook locationWhen installing the TV onto the Base Bracket.
ba
B
C
A E
D
Screen centre point
B
C
A E F
GHD
125
Screen centre point
(Continued)
GB01COV.book Page 29 Wednesday, December 15, 2010 1:22 PM
30 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Unit: mm
*1 Except Australia model*2 Australia model
Figures in the table may differ slightly depending on the installation.
The wall that the TV will be installed should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 23) for its weight.
Model NameKDL-
Display dimensionsScreen centre
dimension
Length for each mounting angle
Angle (0°) Angle (20°)
A BC D E F G H
SU-WL50B SU-WL50B SU-WL50B
55EX72x 1269 769 93 492 90
46EX72x 1078 660 148 492 92
46EX52x 1078 660 148 492 92
46CX52x 1122 682 137 485 135
40EX72x 943 586 185 492 91
40EX52x 943 586 185 492 91
40CX52x 991 606 175 485 132
32EX72x 755 480 189 444 92
32EX52x/32EX420*1 755 480 189 444 92
32EX420*2 755 482 189 446 92
32CX52x 799 502 200 460 131
SU-WL100
26EX42x 631 406 78 295 95 204 374 263
22EX42x 529 347 108 295 93 182 319 276
WARNING
GB01COV.book Page 30 Wednesday, December 15, 2010 1:22 PM
31 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Ad
ditio
nal In
form
ation
Safety Information
Installation/Set-upInstall and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries.
Installation• The TV set should be installed near an
easily accessible AC power outlet.• Place the TV set on a stable, level surface
to avoid it from falling down and cause personal injury or damage to the TV.
• Only qualified service personnel should carry out wall installations.
• For safety reasons, it is strongly recommended that you use Sony accessories, including:
– Wall-mount bracketSU-WL100 (KDL-26/22EX42x)SU-WL50B (except KDL-26/22EX42x)
• Be sure to use the screws supplied with the Wall-mount bracket when attaching the mounting hooks to the TV set. The supplied screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-mount bracket model. Use of screws other than those supplied may result in internal damage to the TV set or cause it to fall, etc.
Transporting• Before transporting the TV set, disconnect
all cables.• Two or more people are needed to
transport a large TV set.• When transporting the TV set by hand,
hold it as shown below. Do not put stress on the LCD panel and the frame around the screen.
• When transporting the TV set, do not subject it to jolts or excessive vibration.
• When transporting the TV set for repairs or when moving, pack it using the original carton and packing material.
Ventilation• Never cover the ventilation holes or insert
anything in the cabinet.• Leave space around the TV set as shown
below.• It is strongly recommended that you use a
Sony wall-mount bracket in order to provide adequate air-circulation.
Installed on the wall
Installed with stand
• To ensure proper ventilation and prevent the collection of dirt or dust:
– Do not lay the TV set flat, install upside down, backwards, or sideways.
– Do not place the TV set on a shelf, rug, bed or in a closet.
– Do not cover the TV set with a cloth, such as curtains, or items such as newspapers, etc.
– Do not install the TV set as shown below.
AC power cordHandle the AC power cord and outlet as follows in order to avoid any risk of fire, electrical shock or damage and/or injuries:
– Use only Sony supplied AC power cords, not those of other brands.
– Insert the plug fully into the AC power outlet.
– Operate the TV set on a 110–240 V AC supply only.
– When wiring cables, be sure to unplug the AC power cord for your safety and take care not to catch your feet on the cables.
– Disconnect the AC power cord from the AC power outlet before working on or moving the TV set.
– Keep the AC power cord away from heat sources.
– Unplug the AC power plug and clean it regularly. If the plug is covered with dust and it picks up moisture, its insulation may deteriorate, which could result in a fire.
Notes• Do not use the supplied AC power cord on
any other equipment.• Do not pinch, bend, or twist the AC power
cord excessively. The core conductors may be exposed or broken.
• Do not modify the AC power cord.• Do not put anything heavy on the AC
power cord.• Do not pull on the AC power cord itself
when disconnecting the AC power cord.• Do not connect too many appliances to the
same AC power outlet.• Do not use a poor fitting AC power outlet.
Prohibited UsageDo not install/use the TV set in locations, environments or situations such as those listed below, or the TV set may malfunction and cause a fire, electrical shock, damage and/or injuries.
Location:• Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a vehicle, in medical institutions, unstable locations, near water, rain, moisture or smoke.
• If the TV is placed in the changing room of a public bath or hot spring, the TV may be damaged by airborne sulfur, etc.
• For best picture quality, do not expose the screen to direct illumination or sunlight.
• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor colour. Should this occur, allow moisture to evaporate completely before powering the TV on.
Mounting Hook
Hook attachment on rear of TV set
Screw (supplied with the Wall-mount bracket)
8 mm - 12 mm
KDL-26/22EX42x
KDL-55/46/40/32EX72x/KDL-46/40/32EX52x/KDL-46/40/32CX52x/KDL-32EX420
30 cm
10 cm 10 cm
10 cmLeave at least this space around the set.
30 cm
10 cm 6 cm
Leave at least this space around the set.
10 cm
Air circulation is blocked.
Wall Wall
(Continued)
GB01COV.book Page 31 Wednesday, December 15, 2010 1:22 PM
32 GB
g _ ( ) _
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Environment:• Places that are hot, humid, or excessively
dusty; where insects may enter; where it might be exposed to mechanical vibration, near flammable objects (candles, etc). The TV set shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the TV.
• Do not place the TV in a humid or dusty space, or in a room with oily smoke or steam (near cooking tables or humidifiers). Fire, electric shock, or warping may result.
• Do not install the TV in places subject to extreme temperature, such as in direct sunlight, near a radiator or a heating vent. The TV may overheat in such conditions which can cause deformation of the enclosure and/or TV malfunction.
Situation:• Do not use when your hands are wet, with
the cabinet removed, or with attachments not recommended by the manufacturer. Disconnect the TV set from AC power outlet and antenna during lightning storms.
• Do not install the TV so that it sticks out into an open space. Injury or damage from a person or object bumping into the TV may result.
Broken pieces:• Do not throw anything at the TV set. The
screen glass may break by the impact and cause serious injury.
• If the surface of the TV set cracks, do not touch it until you have unplugged the AC power cord. Otherwise electric shock may result.
When not in use• If you will not be using the TV set for
several days, the TV set should be disconnected from the AC power for environmental and safety reasons.
• As the TV set is not disconnected from the AC power when the TV set is just turned off, pull the plug from the AC power outlet to disconnect the TV set completely.
• However, some TV sets may have features that require the TV set to be left in standby to work correctly.
For children• Do not allow children to climb on the TV
set.• Keep small accessories out of the reach of
children, so that they are not mistakenly swallowed.
If the following problems occur...Turn off the TV set and unplug the AC power cord immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it checked by qualified service personnel.
When:– AC power cord is damaged.– Poor fitting of AC power outlet.– TV set is damaged by being dropped, hit
or having something thrown at it.– Any liquid or solid object falls through
openings in the cabinet.
GB01COV.book Page 32 Wednesday, December 15, 2010 1:22 PM
GB01COV.book Page 33 Wednesday, December 15, 2010 1:22 PM
GB01COV.book Page 34 Wednesday, December 15, 2010 1:22 PM
GB01COV.book Page 35 Wednesday, December 15, 2010 1:22 PM
© 2011 Sony Corporation Printed in Malaysia
4-268-265-12(1)
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX5204-268-265-12(1)
Instructions about “Installing Wall Mount Bracket” are included within this TV’s instructions manual.
Customer Support:
GB01COV.book Page 36 Wednesday, December 15, 2010 1:22 PM