SONY VGN U series disassembly

8/12/2019 SONY VGN U series disassembly

1/10

U Series

Confidential

Chapter 1. Disassembly & Assembly Guide

1.MS-1-D.1

1-3. Disassembly & Assembly

- Main Section -

MS-1@Main Section Disassembly


2/10

U Series

Confidential

Battery Pack, Dummy Card

1) 2)

1.MS-1-D.2

Slide the lever outward and release the lock. In the state of 1), raise the Battery Pack toward you.

Battery Pack

Remark

After removing the Battery Pack Pull out the Dummy Card in the direction of the arrow.

4)

Dummy Card


3/10

U Series

Confidential

Memory

Cushion (Scale)

Memory

1) 2)

1.MS-1-D.3

3)

Remove the one screw. Remove the Lid (Memory).

Remove the Memory.

Screw : B4

Lid(Memory)

*It is connected with the connector.

*Be careful not to damage the Board.


4/10U Series

Confidential

Cabinet (Bottom)

1) 2)

1.MS-1-D.4

Remove the ten screws.

Screw : B5

Screw : B4

After removing the one screw, the Lid (MS) is removable.

Lid (MS)

Cabinet (Bottom)

Remark

Remove the Cabinet (Bottom).

*It is recommended to start removing from left side.

3)

Peel off the Label.

Label, Seal

Detent

Japanese Models 1 [MA]


5/10U Series

Confidential

Bracket (Strap R/L)

1)

1.MS-1-D.5

Remove the Bracket (two places).

Bracket (Strap L)

Bracket (Strap R)


6/10U Series

Confidential

Escutcheon

1)

1.MS-1-D.6

2)

Disengage the detents (eight places) in order.

Insert the fingers between the Escutcheon and the Board,

outspread the Escutcheon, and disengage the detent.

Remove the Escutcheon.

Escutcheon

Remark1

Escutcheon

1

2

3

4

Led Lens (MS)

Button (PW)

Button (H)

Battery Lock L

Battery Lock R

Lever Battery

Button (ST)

Button (SE)

Button (WL)

Lever Battery

Led Lens (WL)

a

Remark2

Sheet (MS Led)

These parts are included in the X-ban of the Escutcheon.

*The part of a is attached in the Escutcheon, and it does not have

a part number.


7/10U Series

Confidential

Mother Board-1

1) 2)

1.MS-1-D.7

3)

Raise the lock lever and remove the FFC (two places)

and FPC (one place).

Disconnect the Harness.

FPC

FFC

FFC

Harness

Cover (Fan)

Disengage the detents (two places).

Detent

Detent

C fid ti l


8/10U Series

Confidential

Mother Board-2

4)

1.MS-1-D.8

5) 6)

Remove the Mother Board.

*Pay attention to the dowels.

Mother Board

Remove the two screws.

Screw : B3

Kapton Sheet (Small)

Peel off the Sheet (two places).

Dowel

Confidential1 MS 1 D 9


9/10U Series

Confidential

Mother Board-3

7)

1.MS-1-D.9

Remove the Wireless LAN Module.

*It is connected with the Connector.

Wireless LAN Module

Confidential


10/10U Series

Confidential

Update History

Date Contents Version No.

[ADD]---Addition [DEL]---Deletion [CHG]---Change [COR]---Correction [MA]---Model Addition

2004.11.15 [MA] (Page 4) 2.001

Documents

SONY VGN U series disassembly