Sony BDP-S780 Blu-ray Player Service Manual

Embed Size (px)

DESCRIPTION

Sony BDP-S780 Blu-ray Player Service Manual

Citation preview

SERVICE MANUALVer. 1.0 2011.01

RMT-B112A/B112C/B117A/B112PAustralia Model Canada Model Chinese Model Europe Model Latin America Model Mexican Model Russian Model Singapore Model Taiwan Model UK Model US ModelBDP-S780

BDP-S780

Photo: BDP-S780 Remote : RMT-B112A

SPECIFICATIONSSYSTEM EXT:

Inputs and outputs

Laser: Semiconductor laser

(Jack name: Jack type/Output level/Load impedance) Phono jack/2 Vrms/10 kilohms Optical output jack/18dBm (wave length 660 nm) Phono jack/0.5 Vp-p/75 ohms

External memory slot (For connecting the external memory) DC output: 5 V 500 mA Max USB jack Type A (For connecting a USB memory, memory card reader, digital still camera and digital video camera) Wireless LAN standard: IEEE802.11/b/g/n (US, AEP,SP,RUS,CN,MX,E): 2.4 GHz band: Channels 1-13 TW: 2.4 GHz band: Channels 1-11

GeneralPower requirements: 120 V AC, 60 Hz (US, CND) 220 240 V AC, 50/60Hz (CN,AUS,RUS, AEP, UK) 110 240 V AC, 50/60Hz (MX, E, SP) 110 V AC, 60Hz (TW) Power consumption: 22 W Dimensions (approx.): 430 mm 199 mm 46mm (17 in. 7 4/5 in. 1 13/16 in.) (width/depth/height) incl. projecting parts Mass (approx.): 1.8 kg (3 lb 152/8 oz) (EXCEPT UK) 1.9 kg (5 lb 11/8 oz) (UK) Operating temperature: 5 C to 35 C (41 F to 95 F) Operating humidity: 25 % to 80 % Supplied accessories Audio/video cable (phono plug 3) (1) BDP-S780:RUS, AUS,US,CND) HDMI cable (1) BDP-S780:SP, CN,E,TW,MX) Remote commander (remote) (1) Size AA (R6) batteries (2) LAN cable (1) (TW)

USB:

LINE OUT R-AUDIO-L:

DIGITAL OUT (OPTICAL):

DIGITAL OUT (COAXIAL): HDMI OUT:

Wireless

COMPONENT VIDEO OUT(Y, P B , P R ) : Phono jack/Y: 1.0 Vp-p/ P B, PR: 0.7 Vp-p/75 ohms

HDMI 19-pin standard connector

Frequency range:

LINE OUT VIDEO: LAN (100):

Phono jack/1.0 Vp-p/75 ohms

Modulation:

DS-SS Modem and OFDM Modem

100BASE-TX Terminal

Specifications and design are subject to change without notice.

(BDP- S780 : US Only)

ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. ENERGY STAR is a registered mark owned by the U.S. government.

BLU-RAY DISC/DVD PLAYER

9-890-750-11

Sony CorporationHome Entertainment Business Group

2011A6900-1 2011.01 Published by Design Engineering Dept.

BDP-S780 SAFETY CHECK-OUTAfter correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. 2. Check the interboard wiring to ensure that no wires are pinched or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. 4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 5. Check the line cord for cracks and abrasion. Recommend the replacement of any such line cord to the customer. 6. Check the B+ voltage to see it is at the values specified. 7. Check the antenna terminals, metal trim, metallized knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers' instructions to use these instruments. Notice for customers in the United Kingdom and 2. A battery-operated AC milliammeter. The Data Precision 245 Republic of Ireland digital multimeter is suitable molded plug complying with A for this job. BS1363 is a resistor by means 3. Measuring the voltage drop across tted to this equipment of a To reduce the risk of re or electric VOM or battery-operated for your safety and convenience. shock, do not expose this apparatus AC voltmeter. The limit indication Should the fuse in the plug to rain or moisture. analog meters must have an accurate low-voltage is 0.75V, so supplied need to be replaced, a 5 To avoid electrical shock, do not scale. The Simpson 250 andAMP fuseSH-63Trd are examples of a Sanwa approved by ASTA or open the cabinet. Refer servicing to BSI to BS1362, (i.e., marked with Disposal of was qualipassive VOM that is suitable. Nearly all battery operated digital ed personnel only. or mark) must be used. batteries (appli multimeters that have a 2V If therange are suitable. (See Fig. A) AC plug supplied with this

WARNING

Parts on Set

0.15F

1.5k (0.75 V)

the European Un equipment has a detachable fuse other Europea cover, be sure to attach the fuse cover after you change the fuse. with separate Never use the plug without the fuse CAUTION: systems) cover. If you should lose the fuse The use of optical instrument with this product your nearest This symbol on the will increase eye CAUTION cover, please contact the packaging in The use of hazard. optical instruments with Sony service station. battery provided this product will increase eye shall not be trea hazard. As the laser beam used in CAUTION waste. this Blu-ray Disc/DVD player is By Use of eyes, do not attempt to harmful to controls or adjustments or performance of proceduresensuring thes disposed of correctl disassemble the cabinet. other than those specified herein may result in hazardous radiaprevent potentia Refer servicing to quali ed consequences fo tion exposure. personnel only. and human heal otherwise be cau Disposal of Old Electrical For customers in European countries inappropriate wa & Electronic Equipment battery. The recyc (Applicable in the materials will he European Union and natural resourceBatteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, re or the like.

Earth Ground

Fig. A. Using an AC voltmeter to check AC leakage.

WARNING!! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK OR DOTTED LINE WITH ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS MARK LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFS PAR UNE MARQUE SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PISES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPMENTS PUBLIS PAR SONY.

In case of product performance or reasons require connection with This symbol on the product or on product. The CLASS 1 LASER PRODUCT battery, this batte its packaging indicates that this This label is located on the laser MARKING is locatedbe treated as product shall not on the rear exterior. replaced by qua protective housing inside the only. household waste. Instead it shall be enclosure. To ensure that th handed over to the applicable treated properly collection point for the recycling of product at end-o electrical and electronic applicable collec equipment. By ensuring this recycling of elec product is disposed of correctly, Unleaded solder electronic equip you will help prevent potential Boards requiring use of unleaded solder are printed with the leadnegative consequences for the free mark (LF) indicating the solder contains no lead. For all other batt environment and human health, This appliance is classi ed as (Caution: Some printed acircuit which could otherwise be caused with boards may not come printed the section on h CLASS 1 LASER product. The battery from the by inappropriate waste handling of the lead free PRODUCT to their particular size.) mark due CLASS 1 LASER Hand the battery this product. The recycling of MARKING is located on the laser applicable collec materials will help to conserve protective housing inside the recycling of was natural resources. For more enclosure. : LEAD FREE MARKdetailed information about (Except US, solder has For more detaile recycling of this product, Unleaded Canadian, E) the following characteristics. please about recycling contact your local Civic O ce, Unleaded solder melts at a temperature about 40C higher than please co battery, your household waste disposal ordinary solder. service or the shop where you Ci vic O ce, you waste Ordinary soldering irons canpurchased the product. tip has to be disposal s be used but the iron where you purch

other European countries with separate collection systems)

2

applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.

2

BDP-S780TABLE OF CONTENTSSection 1.1-1.

Title

Page

Section

Title

Page

SERVICE NOTE1-1 1-1 1-2 1-2 1-9 1-15 1-15 1-15 1-16 1-16 1-17 1-17 1-18 1-19 1-20 1-20 1-23E 4-13. MB-140 Board (HDMI) Schematic Diagram (7/17)............................................ 4-14. MB-140 Board (ETHERNET) Schematic Diagram (8/17)............................................ 4-15. MB-140 Board (AUDIO) Schematic Diagram (9/17)............................................ 4-16. MB-140 Board (VIDEO) Schematic Diagram (10/17).......................................... 4-17. MB-140 Board (GPIO/JTAG) Schematic Diagram (11/17) .......................................... 4-18. MB-140 Board (IF CON) Schematic Diagram (12/17).......................................... 4-19. MB-140 Board (FE OP/GIO) Schematic Diagram (13/17).......................................... 4-20. MB-140 Board (FE_POWER/MOTOR DRIVE) Schematic Diagram (14/17) ........................................ 4-21. MB-140 Board (DC FAN) Schematic Diagram (15/17).......................................... 4-22. MB-140 Board (VIDEO IN OUT) Schematic Diagram (16/17).......................................... 4-23. MB-140 Board (SATA) Schematic Diagram (17/17) ........................................ 4-24. Waveforms ................................................................... 4-13 4-14 4-15 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 4-24E

Disc Removal Procedure If The Tray Cannot Be Ejected (Forced Ejection) ............................................. 1-2. Work when optical device are replaced........................ 1-3. Test Disc ....................................................................... 1-3-1. Operation and Display............................................. 1-3-2. Main functions ......................................................... 1-4. Drive Repairing............................................................. 1-4-1. Preparation.............................................................. 1-4-2. Checking Flow ~ Drive (BU) section ~ .................... 1-4-3. BU Check Flow [zz] ~ .............................................. 1-4-4. BU (Optical Block) Repair Guide............................. 1-4-5. BU Adjustment Flow [yy] ~ ...................................... 1-4-6. KEM-470AAA/C2RP Packing Spec. ....................... 1-4-7. KEM-470AAA/C2RP Packing .................................. 1-4-8. BU Data Decode Jig................................................ 1-4-9. Loading For Service ......................................... 1-4-10. Laser Caution Label ................................................ 1-5. Rear Panel Assembly Caution................................. ..

2.2-1. 2-2. 2-3. 2-4. 2-5. 2-6. 2-7. 2-8. 2-9.

DISASSEMBLYDisassembly Flow ........................................................ Upper Case .................................................................. Tray Cover Assy .......................................................... Front Panel Assy, FL-205,FR-313 IR-076 board and WLAN card..................................... Rear Panel Block ......................................................... MB-140 Board ............................................................. BD Drive ..................................................................... .. Switching Regulator ..................................................... Circuit Boards Location ................................................ 2-1 2-1 2-2 2-2 2-3 2-3 2-4 2-5E 2-5E

5.5-1. 5-2. 5-3. 5-4.

PRINTED WIRING BOARDThis Note Is Common For Printed Wiring Boards ........ FR-313 Board (REAR) Printed Wiring Board.... FL-205 Board and IR-076 Board Printed Wiring Board ...................................................... MB-140 Board(MAIN) Printed Wiring Board (Side A) ................................... .. MB-140 Board (MAIN) Printed Wiring Board (Side B) ...................................... 5-1 5-2 5-3 5-4 5-5E

3.3-1. 3-2. 3-3. 3-4. 3-5.

BLOCK DIAGRAMOverall Block Diagram.................................................. DSP Block Diagram...................................................... AV OUT Block Diagram ................................................ USB/ETHER, Block Diagram .................................. Power Block Diagram .......................................... 3-1 3-2 3-3 3-4 3-5E

5-5.

6. 7. 8. 9. 10.

IC PIN FUNCTION DESCRIPTION ...................

6-1

4.4-1. 4-2. 4-3. 4-4. 4-5. 4-6. 4-7.

SCHEMATIC DIAGRAM

SERVICE MODE ..................................................... 7-1 ERROR LOG LIST ................................................. 8-1 TROUBLESHOOTING............................................. 9-1 REPAIR PARTS LIST10-1 10-1 10-2 10-3 10-4 10-5

This Note Is Common For Schematic Diagrams .......... 4-1 Frame Schematic Diagram........................................... 4-2 FR-313 Board (FRONT RIGHT) Schematic Diagram ... 4-3 FR-313 Board (USB FRONT) Schematic Diagram ...... 4-4 FL-205 Board (POWER) Schematic Diagram ... 4-5 IR-076 Board (RECEIVER) Schematic Diagram .. 4-6 MB-140 Board (DDR 3 A) Schematic Diagram (1/17)............................................ 4-7 4-8. MB-140 Board (DDR 3 B) Schematic Diagram (2/17)............................................ 4-8 4-9. MB-140 Board (POWER) Schematic Diagram (3/17)............................................ 4-9 4-10. MB-140 Board (POWER 2) Schematic Diagram (4/17)............................................ 4-10 4-11. MB-140 Board (FLASH/HOST) Schematic Diagram (5/17)............................................ 4-11 4-12. MB-140 Board (USB) Schematic Diagram (6/17)......... 4-12

10-1. Exploded Views ............................................................ 10-1-1. Case Section ........................................................... 10-1-2. Main Chassis Section ........................................... 10-1-3. BD Section ............................................................. 10-1-4. Accessories .......................................................... 10-2. Electrical Parts List .......................................................

3

SECTION 1 SERVICE NOTE1-1.1. Remove the upper case. (Refer to page 2-1) 2. Insert a clip in the hole of a drive and open a tray.Note:(Use clip diameter about 1.2 mm)32)m m

BDP-S780

DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)

(12~

hole

clip

Fig.1

tray

1-2.

Work when optical device are replaced

Note: Please do the following work when you replace the optical device.

1. Install it in PC after downloading two set of software from following URL. (Refer to 1-4-8. BU Data Decode Jig on page 1-19) STEP 1 Microsoft .NET Framework Version 2.0 Redistributable Package (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5 STEP 2 Microsoft .NET Framework 2.0 Service Pack 1 (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-aacf-a7633f706ba5 2. Take a photograph of the bar code on the optical device. The valid bar code photo as shown in Fig.2

Fig.2

3. Drag-and-drop the bar code photograph to the icon of decode software (BDPRdec). * The decode software is a complete set of BDPRdec, Tasman.Bars.dll, and SavePath. * Because decode software cannot be attached, it separately distributes it. 4. Input the password when you start decode software. * Inquire of each service headquarters because the password cannot be disclosed. 5. Write the decode data to the set. (Refer to 1-4-4. BU (Optical Block) Repair Guide on page 1-16 and 1-4-5. BU Adjustment Flow [yy] on page 1-17)

1-1

BDP-S7801-3. TEST DISCPart No. J-6090-199-A J-6090-200-A J-2501-307-A J-2501-305-A J-2501-306-A J-6090-077-A J-6090-078-A Description BLX-104 BLX-204 CD (HLX-A1) HLX-513 HLX-514 HLX-506 HLX-507 Single Layer (NTSC) Dual Layer (NTSC) Single Layer (PAL) Dual Layer (PAL) Layer Single Layer Dual Layer

1-3-1. Operation and DisplayCheck Items 1) BLX-104 1. Select 23.976Hz/1080p 2. Play 4.Motion pictures 3. Check whether player can play back or not 4. Check each outputs Video: Composite/component/HDMI Audio: Digital out (Coaxial/Optical)/Audio out/5.1Ch output * When 1080/24p monitor is nothing, 1080i (59.94Hz or 50Hz) can use instead of 1080/24p. However this is temporary correspondence. 2) BLX-204 1. Select 1080i (59.94Hz or 50Hz) 2. Play 4.Motion pictures 3. Check whether player can play back or not (Check the picture and sound output) 3) CD (HLX-A1) Check whether player can play back or not (Check the sound output) 4) HLX-513/514 (NTSC), HLX-506/507 (PAL) 1. After displayed Main Menu, select 1.Video 2. Play 1.Color Bar 100% (Check the picture and sound output) 3. Return to Menu 4. Play Demonstration 4:3 or 5.Demonstration 16:9 (Check the picture and sound output)

1-2

BDP-S7801-3-1-1. BLX-104 Menu Function (1) Main Menu

X X X X X X X

X

X

X X X X X

X

X

1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 1-3-1-2. BLX-104 Menu Function (2) Main Menu

To Main Menu after playback of T62_C1 To Main Menu after playback of T61_C1 To Main Menu after playback from T54_C1 to T60_C1 Sub_menu3 is displayed To Main Menu after playback of T21_C1 To Main Menu after playback of T20_C1 To Main Menu after playback from T2_C1 to T19_C1 Sub_menu1 is displayed

* * *

Note:

When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively displayed. When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed. 5. AV Sync does not operate.Txx_ Cxx Chapter No. Title No.

1-3

BDP-S7801-3-1-3. BLX-104 Menu Function (3) Main Menu

To Main Menu after playback of T52_C1 To Main Menu after playback of T51_C1 To Main Menu after playback from T44_C1 to T50_C1 Sub_menu2 is displayed To Main Menu after playback of T42_C1 To Main Menu after playback of T41_C1 To Main Menu after playback from T23_C1 to T40_C1 Sub_menu4 is displayed

* * *

When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively displayed. When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively displayed. 5. AV Sync does not operate.

1-4

BDP-S7801-3-1-4. BLX-104 Menu Function (4) Sub menu1

X X

X

X X

X

1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/1080i is selectively displayed. 6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. ColorBar 100% is selectively displayed on Sub menu1 screen. 9) At the selection of Main Menu, 1. VideoSignal of 1080/59.94i of Main Menu is selectively displayed. 10) AV Sync does not operate.

1-5

BDP-S7801-3-1-5. BLX-104 Menu Function (5) Sub menu2

X X

X

X X

X

1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 23.976Hz/1080P is selectively displayed. 6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 9) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed. 10) AV Sync does not operate.

1-6

BDP-S7801-3-1-6. BLX-104 Menu Function (6) Sub menu3

X X

X

X X

X

1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/1080i is selectively displayed. 6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 7) Selection of Dolby AC-3 Audio t Playback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 9) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed. 10) AV Sync does not operate.

1-7

BDP-S7801-3-1-7. BLX-104 Menu Function (7) Sub menu4

X X

X

X X

X

1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P is selectively displayed. 6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 8) Selection of Motion Picture t Return to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 9) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed. 10) AV Sync does not operate.

1-8

BDP-S7801-3-2 Menu Function1-3-2-1. BLX-204 Menu Function (1) Main Menu

X X X X X X X X

X

X

X X X X X X

X

X

1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 1-3-2-2. BLX-204 Menu Function (2) Main Menu

To Main Menu after playback of T83_C1 t To Main Menu after playback of T62 T82 To Main Menu after playback of T61_C1 t To Main Menu after playback of T54_C1-T60_C1 T83_C1-T94_C1 Sub_menu3 is displayed To Main Menu after playback of T67_C1 t To Main Menu after playback of T21 T63t T64t T65t T66 To Main Menu after playback of T20_C1 To Main Menu after playback from T2_C1 to T19_C1 Sub_menu1 is displayed

* *

Note:

When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively displayed. When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.Txx_ Cxx Chapter No. Title No.

1-9

BDP-S7801-3-2-3. BLX-204 Menu Function (3) Main Menu

To Main Menu after playback of T70_C1 To Main Menu after playback of T52_C1 T69 t To Main Menu after playback of T51_C1 To Main Menu after playback of T44_C1-T50_C1 T71_C1-T81_C1 t Sub_menu2 is displayed To Main Menu after playback of T68_C1 To Main Menu after playback of T42_C1 To Main Menu after playback of T41_C1 To Main Menu after playback from T23_C1 to T40_C1 Sub_menu4 is displayed

* *

When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively displayed. When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively displayed.

1-10

BDP-S7801-3-2-4. BLX-204 Menu Function (4) Sub menu 1

X X

X

X X

X

1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/1080i is selectively displayed. 6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 9) Selection of AV Sync t Return to Sub menu1 after playback of T67_C1. 1. Color Bar 100% is selectively displayed on Sub menu1 screen. 10) At the selection of Main Menu, 1. Video Signal of 1080/59.94i of Main Menu is selectively displayed.

1-11

BDP-S7801-3-2-5. BLX-204 Menu Function (5) Sub menu 2

X X

X

X X

X

1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 23.976Hz/1080P is selectively displayed. 6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1 and from T71_C1 to T81_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1 and T69. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 9) Selection of AV Sync t Return to Sub menu2 after playback of T70_C1. 1. Color Bar 100% is selectively displayed on Sub menu2 screen. 10) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.

1-12

BDP-S7801-3-2-6. BLX-204 Menu Function (6) Sub menu 3

X X

X

X X

X

1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/1080i is selectively displayed. 6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1 and from T84_C1 to T94_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 7) Selection of Dolby AC-3 Audio t Playback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1 and T82. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 9) Selection of AV Sync t Return to Sub menu3 after playback of T83_C1. 1. Color Bar 100% is selectively displayed on Sub menu3 screen. 10) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.

1-13

BDP-S7801-3-2-7. BLX-204 Menu Function (7) Sub menu 4

X X

X

X X

X

1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 3) Selection of 2. Color Bar 75% t Return to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine. 5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P is selectively displayed. 6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 8) Selection of Motion Picture t Return to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 9) Selection of AV Sync t Return to Sub menu4 after playback of T68_C1. 1. Color Bar 100% is selectively displayed on Sub menu4 screen. 10) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.

1-14

BDP-S7801-4. DRIVE REPAIRING1-4-1. Preparation

ESD MeasuresIt is necessary to check the working space ESD condition before starting the Drive Part (BU) repairs The ESD-resistance of BD Laser is weaker than DVD/CD Laser To prevent ESD destruction, please make sure the working space and human ESD.

How to open FFC Holder. Refer below picture.

11

1

22

2

1-4-2. Checking Flow ~ Drive (BU) section ~Drive flowchart BLX-104 BDP-S780 can play the BD-disc YES NO Check Drive Power Supply CN301 Pin 3: 12V IC309 Pin 1: 5V YES Check / replace the FFC cable, then check NO BDP-S780 operates normally OP FFC cable (1-838-615-11) SPD FFC cable (1-838-617-11) YES DVD: HLX-513 CD: HLX-A1 BDP-S780 can play the DVD/CD-disc NO OK Check the Optical Block Unit (BU) by service mode. (Flowchart zz) BU IOP is OK? NO Replace the Optical Block Unit (BU) NO Check PS301, PS302 Replace PS when open

Optical Block Unit (BU) replace (Flowchart yy)

1-15

BDP-S7801-4-3. BU Check Flow [zz] ~

Before BU Replacement ~Optical Block Unit (BU) IOP check flow (zz) ~ [Before BU Replacement] Enter Service Mode Press ., , and plug in AC Power Inside *Service Mode Menu Select [8] Drive

Inside *Drive Select [7] OP Check Menu

Inside *OP Check Menu Select [2] dIOP then press 'ENTER' Specification dIOP BD: + 6mA DVD, CD: + 9mA YES AC Power OFF NO

IOP out of specification need BU replacement

Optical Block Unit (BU) replace (Flowchart yy)

1-4-4. BU (Optical Block) Repair Guide

BDP 6G (BDP-S780) series component structure is as same as conventional DVD Players. However BD player requires precise read out functions and also secure contents Protection system. Since above requirement, it is necessary to set/adjust BU data to EEPROM. The following cases need Adjustments; (1)Replace BU (MB is original) (2)Replace MB (BU is original) (3)Replace both BU and MB JIG Requirement Digital camera (recommend with macro mode) Barcode decoder (BDPRdec_ver2.0) installed in JIG PCs USB memory ESD work bench Procedure (all cases) Refer the diagram

Remarks: The servo adjustment procedure will be carried out during OP data Writing. There is no manual adjustment procedure. LD ON TIME history doesnt carry over. Do not touch any optical block parts, Turn Table and during replacing. BD Laser diode is very sensitive!

1-16

BDP-S7801-4-5. BU Adjustment Flow [yy] ~Optical Block Unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement]

Remove the defective BU from Loading Assy and also remove BU insulator (4pcs)

Unpack new BU and take OP Data Barcode photo by camera

Assemble BU with Insulators to Loading Assy (tighten screw with 2kgf)

The following cases need OP Data Write: (1) Replace BU (MB is original) (2) Replace MB (BU is original) (3) Replace both BU and MB JIG requirement Digital camera (with macro mode) Barcode decoder (BDPRdec.exe) installed in jig PC's (jig purpose) USB memory ESD free work bench

Decode the OP Data Barcode phot using BDPRdec.exe and save the test data to USB memory(File Name: BuData.txt)

Enter Service Mode and insert USB memory to USB connector

Select [8] Drive --> Select [1] Drive OP data Write Press ENTER

After Finishing ReWrite OP data --> Turn AC Power OFF And confirm dIOP by select [7] OP Check Menu to verify IOP in specification

IOP in specification --> Turn AC Power OFF

1-4-6. KEM-470AAA/C2RP Packing Spec.

KEM-430AAA/C2RP Packing Spec.

Turn Power ON and check playback performance using BD, DVD and CD

BLX-104 DVD: HLX-513 CD: HLX-A1

1-17

BDP-S7801-4-7. KEM-470AAA/C2RP Packing

Lid foam tray

Antistatic Bag

1) Store it in Cushion CartonAntistatic Bag

2) Store the Cushion carton in the individual carton

Instruction Manual

Cushion Carton

C surface cut facing front

Individual Carton (4-272-629-0)

2) Store it in Individual Carton

Individual Carton (E430-BU-RP)

3) Store it in Master CartonStore 10 individual cartons 1 step X 2 steps = 20 individual cartons in the master carton. Master Carton (E430-BU-RP)

4) Master carton is sealed with the PP tape.

PPT ape Stick it to H.

Shipment Label (Care Mark 3)

1-18

BDP-S7801-4-8. BU Data Decode Jig

BU Data Decode Jig

JIG Name: BDPRdec. exe Release : 2010.11.26 Version : 2.0.0.0

Software Contents: BDPRdec.exe ; Software SavePath.ini ; decoded file destination setting file (initial destination is C:BuData.txt) Tasman.Bars.dll ; decode dll Uninst.exe ; unistall BDPRd ec.exe from PC Installations1.Unzip files to any PC Folder 2.Check the attached 2D code photo(OK_sample.JPG) drag-and-drop onto BDPRdec.exe, the Password will be required at first time only, no need P/W from second time. 3.If there is the error message (.NET frame work requirements) please apply Microsoft .NET Framework 2.0 (or 2.0 SP1) from Microsoft download site.

STEP 1 Microsoft .NET Framework Version 2.0 Redistributable Package (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d8edd-aab15c5e04f5 STEP 2 Microsoft .NET Framework 2.0 Service Pack 1 (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3aacf-a7633f706ba5

*Hou to use Case1 Drag-and-drop 2Dcode photo onto BDPRdec.exe Case2 Drag-and-drop BU data file onto BDPRdec.exe Data file name be changed to specify format and end of 7 character are defined Player : ****BDP.txt Recoder: ****BRD.txt #You can also enter the file path at the prompt. *Remarks Do not change the decoded file name BuData.txt.

1-19

BDP-S7801-4-9. Loading For Service

BDP 6G Loading Assy service parts consists from 3 parts. Holder, Clamper Assy Loading Assy Holder FFC Currently these parts are producing 2 vendors. But the THERE IS NO COMPATIBILITY So, please DO NOT MIX the and of Loading for service and original Loading. . Loading for service A-1750-926-A FFC 1-838-617-11 FFC 1-838-616-11 Loading Assy Holder, FFC 4-167-321-01

Loading For Service

Laser Caution Label

(FFC Holder can be used both service parts and original parts)

FFC 1-838-615-11

Holder, Clamper Assy

1-4-10. Laser Caution Label

Laser Caution Label

The Loading Assy service parts does not have Laser Caution Label. So that please reuse the original Laser Caution label and paste it on top of new Loading Assy.

Following peel off condition are acceptable

Limit Sample

1-20

BDP-S780

In case of BU assy replacement:1. 2. 3. 4. 5. 6. OP related data for new assy is controlled by BU factory All of data is recorded into a barcode label The label is put on the assy Service parts will be followed In service, the data should be read out from problem assy The read data should be saved to new assy

Fact finding:1. The label is DATA MATRIX format 2. The number of data is 91 words 3. The method of reading and saving is required when BU and main board are replaced.

New service method1. All of BU data on the barcode label is shot by digital camera in order to make a JPEG file of BU data. 2. Application software in the PC makes digital data from JPEG file. 3. The converted data is stored to USB memory. 4. The USB memory is connected to BDP 6G unit. 5. In service mode, there is a command to save the data from USB memory to board memory.

1-21

BDP-S780

Save the TEXT data

Shoot the barcode Format is JPEG

USB device is connected to symbol on the rear unit, and the TEXT data as new data is loaded to unit by service mode.

Application Software Data convert from JPEG TEXT

Description: BDPRdec.exe When instruction to PC, password is required. The password will be supplied to only service HQ, and service center name, qty and all of software registered information should be maintained by service HQ, and Video will ask to report the registration information.

1-22

BDP-S7801-5. REAR PANEL ASSEMBLY CAUTIONWhenever you need to assemble the rear panel, please make sure that the Ethernet connector (CN801) Top Contact Springs are in good condition with height 2.0mm 0.5mm (refer to Fig 1)

Fig.1

Fig.2

before assembling the rear panel.

Good Contact Spec. When assembling the rear panel, please ensure good contact between the Top Contact Springs to the rear panel.

1-23E

SECTION 2 DISASSEMBLY This set can be disassembled in the order shown below.

BDP-S780

2-1.

DISASSEMBLY FLOWSET

2-2. UPPER CASE (Page 2-1)

2-3. TRAY COVER ASSY (Page 2-2)

2-4. FRONT PANEL ASSY FL-205, FR-313, IR-076 Boards &WLAN Card (Page 2-2)

2-5. REAR PANEL (Page 2-3)

2-6. MB-140 BOARD (Page 2-3)

2-7. BD DRIVE (Page 2-4)

2-8. SWITCHING REGULATOR (Page 2-5)

Note: Follow the disassembly procedure in the numerical order given.

2-2.

UPPER CASE3 Three tapping screws (tightening torque = 5 to 6kgfcm)

4 Upper case

2 Tapping screw (tightening torque =5 to 6 kgfcm)

1 tapping screw (tightening torque = 5 to 6 kgfcm)

2-1

BDP-S7802-3. TRAY COVER ASSY1 Insert a clip in the hole of a drive to open a tray.

3 Tray cover assy

tray

2

2-4. FRONT PANEL ASSY, FL-205 , FR-313, IR-076 BOARD AND WLAN CARD6 Two screws +BV3 (3-CR) (tightening torque = 6 to 7 kgfcm) 3 Harness (FLM-004) CN331 5 FL-205 Board 7 IR-076 Board 8 Two screws +BV3 (3-CR) (tightening torque = 6 to 7 kgfcm)

One screws +BV3 (3-CR) 4 (tightening torque = 6 to 7 kgfcm)

13 WLAN card 12 Harness, CN603 10 FR-313 Board 9 Flat Flexible Cable (FIM-030) 11 CN702 Two screws +BV3 (3-CR) (tightening torque = 6 to 7 kgfcm)

2

Front Panel

1 Eight hook

2-2

BDP-S7802-5. REAR PANEL BLOCK

4 Rear panel block 3 Two screws +P 3X3 (tightening torque = 4 to 5 kgfcm)

1 Harness CN1503

2 Seven black screws +BV3(3-CR) (tightening torque = 6 to 7 kgfcm)

2-6.

MB-140 BOARD

4 Flexible flat cable (OPT-001)(CN1301)

7 Harness MR-002(CN1205)

5 Flexible flat cable (SPD-001) (CN2460) 6 Flexible flat cable (LDG-001) (CN2470)

8 Six screws +BV3(3-CR) (tightening torque = 6 to 7 kgfcm)9 MB-140 board

1 Harness (PM-167) (CN302)

3

Harness (FLM-004) (CN1203)

2

Flexible flat cable (FIM-030) (CN1204)

2-3

BDP-S780

2-7.

BD DRIVE

3

Four screws +BV3(3-CR) (tightening torque = 6 to 7 kgfcm)

7 BD drive

1

Two screws +BV3(3-CR) (tightening torque = 6 to 7 kgfcm)

4 Optical flexible flat cable (OPT-001) (CN1301) 5 Splindle flexible flat cable (SPD-001) (CN2460) 6 Loading flexible flat cable (LDG-001) (CN2470)

2 Drive bracket

2-4

BDP-S7802-8. SWITCHING REGULATOR

2 Two screw s +BV3(3-CR) (tightening torque = 6 to 7 kgfcm)

3 Switching regulator

2 PS Insulator bottom

2-9.

CIRCUIT BOARDS LOCATIONIR-076 board (BDP-S780:U2 ONLY) MB-140 board FL-205 board

Switching Regulator

FR-313 board

2-5E

BDP-S780SECTION 3 BLOCK DIAGRAM

3-1. OVERALL BLOCK DIAGRAM

DWM-W042 BOARDANT-1 ANT-2

MB-140 BOARDUSB-WLAN WIRELESS LAN CARD (WLAN MODULE)+5VFE BD DRIVE DVD Blu-ray DRIVE IC1401 SA DRIVE IC2401 MOTOR DRIVE 1Gb x4 DDR3 B-BUS IC207 IC206 A-BUS IC106 IC107 WLAN FRONTFL-205 BOARD

J901

Y PB PR

VIDEO

IC1003 VIDEO AMP

COMPONENT VIDEO OUT

FE AUDIO (ANALOG OUTPUT)

VIDEOL

FE

IC903 AUDIO LINE DRIVER

R

AUDIO

LINE OUT

J902 OPTICAL TRANSMITTER

AUDIO (DIGITAL OUTPUT)

USB HDMI USB USB REAR

IC1801 NOAH

IC1902 HDMI TX

CN1901 HDMI OUT

S331 POWER

IC501 2G NAND FLASH X401 27MHZ

USB

CN604

ETHERNET IC101 MAIN SYSTEM CONTROL, DSP SATA I/F, MEMORY CONTROL, A/V OUT, HDMI, ETHERNET I/F, USB I/F CXD9998G-CB/CC

A UNSW12V

CN801 LAN(100)

VOLTAGE DIVIDER FR-313 BOARD ND701 VACCUM FLUORESCENT DISPLAY IC702 VFD DRIVER IC1504 P FAIL

REGULATOR CORE_1.1V DCD6V SW5V DCDC-4V 3.3VA FE_SW 5V 1.2VA DDR3_1.5V FE_SW12V DAC3.3V UNSW3.3V

PS1202

FR_6V

IC 3 01 IC 3 02 IC 3 03 IC 3 04 IC 3 05 IC 3 06 IC 3 07 IC 3 08 IC 3 09 IC 3 10

IC 601 IC 603 IC 604 IC 703 IC 704 IC 705

PS301 PS302

SWITCHING REGULATOR

(AC IN)

T701

Q706,Q707 DC/DC CONVERTER D702 (WHITE)

IC701 REMOTE CONTROL RECEIVER

IC1203 SUB SYSTEM CONTROL

USB

IC1501CONTROLFAN

CN201 S701 STOP S702 OPEN/CLOSE S703 PLAY

IC1206 SELECTOR BDP-S780 U2 ONLY

CN1503

2 1M1501 FAN

The components identied by mark or dotted line with mark are critical for safety. Replace only with part number specied.

J401IR-076 BOARD

BDP-S780 U2 ONLY

3-1

BDP-S7803-2. DSP BLOCK DIAGRAM

MB-140 BOARD23 22 26 25 32 30 28 20 31 33 19 17 8 7 6 34BD_ RF+ BD_ RFDVD_ F + R DVD_ FRK1 K2L1 L2

RFIP RFIN RFIP2 RFIN2 INA INB INC IND INE INF ING INH FE CFREQ FEOSCEN FE CMOD AUX1

DODQ0-DODQ15 DOA0-DOA12 RBA0 RBA1 RBA2 RRAS_ RCAS_ RWE_ RODTAG14 AD19 AC15 AC13 AD14 AE13 AC14 AG24 AH24 AG16 AE15 AC16 M2 N8 M3 J3 K3 L3 K1 J7 K7 K9 L2 K1

IC106 1Gb DDR3 SDRAM BA0 BA1BA2 /RAS /CAS /WE ODT CK /CK CKE /CS /RESET

A B C D E F G HSDIO SCLK LDD_SEN THERMO SA_B+ SA_BSA_A+ SA_A16

G2G1 H2 H1K3

K4J4

J3P5 R5 R3 G4

IC101MAIN SYSTEM CONTROL, DSP,SATA I/F,MEMORY CONTROL A/V OUT,HDMI,ETHERNET I/F USB I/F,

RCLK0 RCLK0_ RCKE RCS_ RRESET

CN1301

39 38 37 36

17 18 19

STP1+ STP1STP2+ STP2-

IC1401 SA_DRIVE

STP1_IN 8 STP2_IN 9 STEP_ENA 7

SA_B SA_A STEP_ENA

N5 P1 P4

FE FM O4 FE FM O3 FE GAINSW2

DODQ16-DODQ31

IC107 1Gb DDR3 SDRAM BA0BA1 BA2 /RAS /CAS /WE ODT CK /CK CKE /CS /RESET

CXD9998G-CB/CC

M2 N8 M3 J3 K3 L3 K1

RCLK1 RCLK1_

AG13 AH13

J7 K7 K9

BD DRIVEDVD Blu -ray DRIVE

FD1 40 FR1 41 TR 42 TD 43 44 FD2 FR2 45

L2

27 28 29 30 24 25

FCS_P FCS_N TRK_P TRK_N TLT_P TLT_N

K1

VFCS 21 VTRK 20 VTLT 22

L3 M4 M3

FOO TRO TLORBA0_BAB26 T24 W25 AD28 AC26 AE28 AD27 L27 L28 V27 AB25 Y26

DIDQ0-DIDQ15 DIA0-DIA12M2 N8 M3 J3 K3 L3 K1 J7 K7 K9 L2 K1

IC2061Gb DDR3 SDRAM BA0 BA1 BA2 /RAS /CAS /WE ODT CK /CK CKE /CS /RESET

VSLED2 17 VSLED1 16 8 9 A AB+ B55 56 52 53 SLED2_P SLED2_N SLED1_P SLED1_N M ONITOR 12 SPDL

N1

FE FM O FE FM O2 FE LIM IT

RBA1_B RBA2_B RRAS_B_ RCAS_B_ RWE_B_ RODT_B RCLK0_B_ RCLK0_B RCKE_B RCS_B_ RRESET_B

N3 V4

CN2460

6 7

VSPIN 18

N2

FEDM0

NS_XTALO 4 3 2 1 2 3 5 U V W 42 U 44 V 46 W IC2401 M OTOR DRIVE NS_XTALI

B13A13

X401 27MHZ

D1DQ16-D1DQ31

CN2470

LOAD LOAD+ TRAY-IN TRAY-OUT

33 LOAD_N 32 LOAD_ P

IC207 VLOAD 19N4

FE TR AYPWMM2

V6

FETR AYIN_ FETR AYOUT_

1Gb DDR3 SDRAM BA0BA1 BA2 /RAS /CAS /WE ODT CK /CK CKE /CS /RESET

N8 M3 J3

CPU_NFD0 - CPU_NFD7 IC501 NCE 9 2Gb CLE 16 NAND FLASH ALE 17 19 WP SYSCON_RST PAGE 3-4 WE 18 NRE 8 RY/BY 7

V5

AH2 AG3 AF4 AG4

CPU_NFCEN CPU_NFCLE CPU_NFALE CPU_NFWEN CPU_NFREN CPU_NFRBNRCLK1_B AB27 RCLK1_B_ AB28

K3 L3 K1 J7 K7 K9 L2 K1

AD4 AE3

3-2

BDP-S7803-3. AV OUT BLOCK DIAGRAM

MB-140 BOARDIC101

J9 01VDACG_OUT A19 Y VDACB_OUT B19 PB VDACR_OUT C18 PR VDACX_OUT C19 CVBS3 YIN 4 PBI N 5 PRI N

PYOUT 12

Y PB PR

1 CVBS IN

IC1003 VIDEOAMP

PBOUT 10 PROUT 9 CVBS OUT 14

COMPONENT VIDEO OUT

SCLSDA

D7E8

XVMUTE FORMAT1

6 MU TE 1 7 MU TE 28 LPF SEL

VIDEO

MAIN SYSTEM CONTROL, DSP SATA I/F MEMORY CONTROL A/V OUT, HDMI ETHERNET I/F USB I/F CXD9998G-CB/CC

AUDIO DAC

IC903

AOUTL 1

LINE OUTLR

AUDIO

AOSDATAO C11 AOLRCK B12 AOBCK A12 AOMCLK C12

D907 D908 D909

D906

7 DACDAT 8

LRCK AOUTR 16 XMUTE 11

9 BCLK 10 MCLK

IFCON_XMUTEAMUTE D10 SPDIFE13

XAMUTEHDMI_SPDIF

D905

DAC3.3VA Q907 BUFFERP17,N16,N17,M16,M17 L16,L17,K16,J16,G16 G17,F16,F17,E16,E17 D16,D17,C16,C17,B15 A15,B14,A14,B13,A13, A7,A6,B12,A12,B11,A11 B10,B9,B8,A8,B7 VOHS R17 VOVS R16 VOCKO H16

J902 DIGITAL OUT PCM/DTS DOLBY DIGITAL

IC1801 NOAH IC T9,T8,T7,U7 T6,U6,T5,U5 R2,R1,P2,P1 N2,N1,M2,M1L2

VDIN 22VDIN 29

E22,F22,A22,B22 A21,B21,E20,C20

OPTICAL TRANSMITTERNOAH_TX_VODO-35 NOAH_TX_VOHS NOAH_TX_VOVS NOAH_TX_VOCK

8555_NOAH_Y0-Y7

VDIN 12- B26,A25,B25,A24 8555_NOAH_C0-C7 VDIN 19 B24,D23,C23,D22 8555_NOAH_HS VDINHSYNC E28 VDINVSYNC VDINCLK SP DATA SPLRCK GP103 GP102F27F28

VIDY 4~11 VOD0-35 VIDC 4~11

98-90 86-77 75-67 63-562 3 88

D0-D8 D9-D18 D19-D27 D28-35

8555_NOAH_VS

VIHS VIVS VICK SIF_D1 SIF_D0 SIF_CK1 SIF_XCS XRST

F13F12

D9

G9

8555_NOAH_VCK 8555_CSI_DO 8555_CSI_DI 8555_CSI_CKO 8555_CSI_NOAH_XCS

L1K1

HSYNC VSYNC IDCK

F2G1

TX0+ TX0TX1+ TX1TX2+ TX2TXC+ TXC-

34

3337 36

CN1901 TMDS DATA0+ TMDS DATA0TMDS DATA1+ TMDS DATA1TMDS DATA2+ TMDS DATA2TMDS CLOCK+ TMDS CLOCK-

4039 31

7 9 4 6 1 3 10 12

F1 G2 D3

30

VDIN4 C27 NOAH_XRST SPDIF E13 HDMI_SD1~4 AOBDATA 1- 4 D11,D12,E10,F10 HDMI_BCLK VDIN9 A27 HDMI_LRCK VDIN10 C26 HDMI_MCLK VDIN8 B27 HDMI8D HDMISCK VDIN5 VDIN33D24 C25 B28 D20

HDMI OUT 6-8 SD1-4 11 SCK 10 WS 5 MCLK 4 SPDIF 49 CSDA 48 CSCLHDMI_XRST HDMI_XINT25

DSDA 47 DSCL 46 HPD51 4IC1904 BUFFER

SDA SCL1

16 1519

HPD

8555-I2C_SDA 8555-I2C_SCL HDMI_XRST HDMI_XINT

HDMI_SPDIF

24

RESET# INTIC1902 HDMI TX

PG 3-4

CEC

Q1902 CEC SWITCH

13

3-3

BDP-S780

3-4. USB/ETHER/ WLAN BLOCK DIAGRAM

MB-140 BOARDWLAN CARD CN603 DM 2 DPAC1 USB_2P_DM1 AC2 USB_2P_DP1

DM USB_IP_DM AB1 USB_IP_DP AB2 USB_2P_DMO USB_2P_DPOAD1 AD2

DP

CN604

DM DP

CN801CXD9998G-CB/CC TXVN_0 B3 TXVP_0 A2 TXVN_1 A4 TXVP_1 B434

LAN (100)

7

8

USBEXT CN201 2 3

FR-313 BOARD

CN702 DM DP 2 1 12 21 DD+

ND701 7 DIN 8 CLK 9 STBGRD1 - GRD8 SEG1 -SEG17

FLD_DIN

13 15 16CN1204

13 15 16REMOTE CONTROL RECEIVERS701 S702 S703

VACCUM FLOURESCENT DISPLAY

IC701

SIRCS_IN

IC1203 CN1102J25 K26 AD6 AE6 M32 L2648 47 49 3 30 31 13 14 16

5

5

IC702 VFD DRIVER

GPIO4 GPIO5

M24

VDIN32 E21 VDIN7 A28 GPIO1E9

3 1 2 10

3 1 2 10

Q709 LED DRIVER

D709 (WHITE)

PG 3-2K23

WP

43

51

GPIO6

AE5

25

KEY1 KEY3 KEY2 LED_WHITE

37

KEY1 KEY3 KEY2 LED_WHITE1

35 36 27 38

FL-205 BOARDCN3311 S331

CN1202 FLASH WRITER33 RXD0 34 TXD0

KEYO

CN1203 IC1206 1 COM CH0 7 CH1 6 CN12051 1 J401

128

CN401

IR-076 BOARD

BDP-S780 U2 DESTINATION ONLY

3-4

BDP-S780

3.5 POWER BLOCK DIAGRAM

MB-140 BOARDUNSW12V IC308 DDR3_1.5V PCONT3 IC 302 DDR3_1.5V VOLTAGE DIVIDER VREF_0.75V DDR3_1.5V IC106 DDR3 SDRAM IC107 DDR3 SDRAM IC206 DDR3 SDRAM IC306 +3.3V REGULATOR 3.3VA1

CN1503 IC1501 FAN REGULATOR Q501 Q502 DCDC4V IC 301 +3.3V REGULATOR FAN CONT1 FAN CONT2 FAN CONT3 IC 1203 UNSW3.3V IF CON CN 1502 (IFCON FLASH WRITER) 2 1 M M1501 FAN

CN30112

UNSW12V

PS302

12

DCDC 4VIC304 +1.2V REGULATOR PCONT3 IC310 DCDC6V PCONT1 PCONT3 1.2VA1

(AC IN)

1 2

PCONT1 PCONT2 PCONT3

VC C

Q907 J902 SPDIF

IC101 CXD9998G-CB/CC

IC207 DDR3 SDRAM DCDC6VIC 601

PCONT_COREATA_PCONT1

IC 501 NAND FLASH

+5V REGULATOR DCDC6VIC 603

USB 5V USB 5V

SRV2225WW(BDP-S780):EXCEPT US, CND SRV2229UC(BDP-S780:US, CND)

7

UNSW-12V

UNSW12V

7

IC307 +1.1V REGULATOR PCONT_CORE IC702 +3.3V REGULATOR PCONT3

GPI07 CORE_1.1V1

AC7

USB_VBUS_PCONT1

+5V REGULATOR

CN604 DCDC6V USB_VBUS_PCONT2 CN1901 DCDC6V PCONT3IC1907

USB1

IC 604 +5V REGULATOR

USB 5V CN603

EXT4

AVDD33_HDMI

1

SFCS

WLAN MODULE

AH5

HDMI 5V CN12041819

18

+5V REGULATOR

HDMI OUT1819

USB1

CN702DCDC CONVERTER

4

FE_GND_M

4

SWITCHING REGULATOR :

IC305 DAC 3.3V +3.3V REGULATOR PCONT3 IC1802 DCDC4V +3.3V PCONT3

IC903 AUDIO DAC

Q706,Q707

DCDC6V PCONT3

+5V REGULATOR

IC1906

PS1201 IC1003

7-8

7-8

ND701 VACUUM FLUORESENT DISPLAY

EXT CN202

LED WHITE

D7019

LED DRIVER

Q709

D705,D706RECT

VIDEO BUFFER

LED_WHITE

CN301

UNSW12V

IC1803 +1.5V PCONT3

SW1.5_PI

IC1801 NOAH

SW3.3V DCDC6V PCONT3

IT_3.3V

10 11

10 11

+5V REGULATOR

IC 303

R708 FR-313 BOARD J901

SW5V

IC904

REMOTE CONTROL RECEIVER

IC703

VFD DRIVER

IC702

5

GND

FE_SW5V5

6

6

IC309 +5V REGULATOR ATA_PCONT1 PS301 FE-UNSW 12V DCDC4V IC1903 IC1902 HDMI TX

Q303

IC 1401 MOTOR DRIVER

CN1401 5V 8V

OPT

3

FE-UNSW 12V

3

Q302

FE_SW12V

IC 1361 +8V REGULATOR IC 2401 MOTOR DRIVER 3.3V

REG+1.8V PCONT3 IC1905 REG+3.3V PCONT3

CN110218

NISECON

SW3.3V

CN110118

ICE

The components identied by or dotted line with mark mark are critical for safety. Replace only with part number specied.

3 -5E

BDP-S780

SECTION 4 SCHEMATIC DIAGRAM4-1. THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMSAll capacitors are in F unless otherwise noted. pF : F. 50V or less are not indicated except for electrolytics and tantalums. All resistors are in ohms, 1/4 W (Chip resistors : 1 /10 W) un-less otherwise specified. k =1000 , M =1000k . % : indicates tolerance. Caution when replacing chip parts. New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, because it is damaged by the heat. Constants of resistors, capacitors, ICs and etc with XX indicate that they are not used. In such cases, the unused circuits may be indicated. All variable and adjustable resistors have characteristic curve B, unless otherwise noted. : nonflammable resistor : fusible resistor : panel designation f : internal component. : adjustment for repair. : B+ Line : B Line Circled numbers refer to waveforms. Voltages are dc between measurement point. Readings are taken with a color-bar signals on Blu-ray disc. Readings are taken with a digital multimeter (DC 10M ). Voltage variations may be noted due to normal production tolerances. Note: The components identified by mark or dotted line with mark are critical for safety. Replace only with part number specified. Note: Les composants identifis par sont critiquens une marque pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.

When indicating parts by reference number, please include the board name.

4-1

BDP-S780

4-2. FRAME SCHEMATIC DIAGRAM1 AGND DP DM VBUS10 11 12 13 14 15 16 17 18 19 20 21 22 SCL SDA CEC RESERVED +5V POWER HPD PARTS BODY PARTS BODY PARTS BODY TMDS DATA2 TMDS DATA0 TMDS CLOCK + TMDS DATA2 + TMDS DATA1 + TMDS DATA1 SHIELD TMDS DATA1 TMDS DATA0 + TMDS DATA0 SHIELD

2

3

4

5

6

7

8

9

10

11

12

13

14

CNxxx 2P GND FAN_OUT 1 2 1 2 GND FAN_OUT

CN1503 2P

4P CN604 REAR

TMDS DATA2 SHIELD

TMDS CLOCK SHIELD

TMDS CLOCK -

DDC/CEC GND

PARTS BODY

B

CNXXXX 45P

CN1301 45P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 OPT-001 1-838-615-11/21 FFC 1 2 3

FR2 FD2 TD TR FR1 FD1 SA_B+ SA_B-

GND MODE_B(2-->3) MODE_A TEST_V LDEN SEN_LDDMPXOUT2 2 3 4 5 6 CN101 2P SERVO MONITOR CN1391 6P MPXOUT1 1

4 5 6 7 8 9 10 11 12 13 14 15 16

SCLKGND

SDIOMPXOUT3

C

SA_A+ SA_AGND THERMO F A E B 5V_PD C GND DVD_RF+ DVD_RFGND BD_RF+ BD_RF-

GNDGIO13

8.0V GND 5.0V GND GND GND GND H VC_PDGND 2 3 4 5 6 NISECON CN1381 6P 3.3V 1SC_IN(N) AC_IN(L)

17 18

19 20 21

GRXD

D G VC_PD H GND GND GND GND 5.0V GND 8.0V GND SDIO SCLK SEN_LDD LDEN

F

TEST_V MODE_A MODE_B(2-->3) GND

CNxxx 9P

G

COMMON W V U FGND B /B A /A

1 2 3 4 5 6 7 8 9 SPD-001 1-838-617-11/21 FFC

CNxxx 5P 1 LOADLOAD+ 1 2 2 3 4 2 LOAD+ TRAY-IN GND TRAY-OUT 1 1 LOAD-

CN1203 2P

CN1202 7P

IFCON FLASH WRITER

KEY0(POWER)

H

TRAY-IN GND TRAY-OUT

IF_RXD

IF_TXD

RESET

MODE

VBUS

2 3 LDG-001 3 3 1-838-616-11/21 4 FFC 4 4 5 5 5 5

To IF

CN1204 23P

CN603 5P

GND

GND

GND

VCC

NC

1

2

1

2

3

4

5

6

7

1

2

3

4

FLM-004 1-967-646-11/21 Harness

FIM-030 1-838-621-11/21 FFC

USB-020 1-967-881-11 Harness

17

18

19

20

14

12

10

11

13

15

16

21

22

23

1

2

3

4

1

2

3

4

6

5

1

USB_VBUS1

FLD_PCONT

KEY2(O/C)

KEY3(PLAY)

KEY0(POWER)

CN702 23P

KEY1(STOP)

LED_WHITE

USB_VBUS2

ICN331 2P

2

7

8

9

DP

GND

GND

GND

GND

GND

DM

GND

SIRCS

FR_6V

FR_6V

IT_3.3V

FLD_DIN

FLD_SCK

FLD_STB

USB_DP

USB_DM

GND

FL-205

FR-313

WLAN PWB

J

4-2

CNxxx 5P

VBUS

GND

GND

GND

5

5

GND

DP

DM

!c

!c

!c

!c

!c

!c

E

!c

!c

!c

!c

BU

!c

!c

!c

BD LOADING ASSY

GND

!c

!c

!c

!c

D

DTXD

GNDJIG_MODE0

22 23 24

BD_RFJIG_MODE1

BD_RF+ GND DVD_RFDVD_RF+ GND C 5V_PD B E A F THERMO GND SA_ASA_A+ SA_BGND 2 3 4 5 6 NISECON CN1102 6P 3.3V 1

25 26 27

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

SA_B+RXD

FD1TXD

FR1JIG_MODE1

TRJIG_MODE0

TD FD2 FR2

46 47 48 49 CN2460 9P 1 2 3 4 5 6 7 8 9 CN302 7P UNSW12V UNSW12V FE_UNSW12V FE_GND_M GND GND UNSW-12V 1 2 3 4 5 6 7 PM-167 1-967-741-11/21 Harness CNxxx 7P 1 2 3 4 5 6 7 UNSW12V UNSW12V FE_UNSW12V FE_GND_M GND GND UNSW-12

COMMON W V U FGND B /B A /A

CN2470 5P

1

2

3

4

To FAN

23

1

2

3

4

5

6

7

8

9

CN1205 2P 19P CN701 HDMI CTRL_S CN801 ETHERNET GND 1 2

MR-002 1-967-648-11/21 Harness 1 2 CTRL-S GND

CN401 2P

IR-076 (ES MODEL only)

!c

!c

!c

!c

!c !c !c !c !c !c !c !c !c

AC OUT

MB-140

IFCON DEBUGGER CN1201 5P GND MODE VCC RESET NC 1 2 3 4 5

SWITCHING REGULATOR P/S

KEY3(PLAY) 2

KEY1(STOP)

USB_VBUS1

USB_VBUS2

FLD_PCONT

LED_WHITE

KEY2(O/C) 1

FLD_DIN

FLD_SCK

IT_3.3V

FLD_STB

USB_DP

USB_DM

FR_6V

SIRCS

FR_6V

GND

GND

GND

GND 4

GND

GND

GND

10

11

12

13

14

15

16

17

18

19

20

21

22

23

3

5

6

7

8

9

BDP-S7804-3. FR-313 BOARD (FRONT RIGH T) SCHEMATIC DIAGRAM- Ref. No.: FR-313 board; 20,000 series See page 5-3 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

Jby mark or dotted line with mark are critical for safety. Replace only with part number

4-3

BDP-S7804-4. FR-313 BOARD (USB FRONT) SCHEMATIC DIAGRAM

- Ref. No.: FR-313 board; 20,000 series See page 5-3 for printed wiring board.1 A 2 3

4

5

6

7

8

9

B

C

D

E

4-4

BDP-S7804-5. FL-205 BOARD (POWER) SCHEMATIC DIAGRAM

- Ref. No.: FL-205 board; 20,000 series See page 5-3 for printed wiring board.

1

2

3

A

B

4-5

BDP-S7804-6. IR-076 BOARD (CTRL-S IN/IR IN) SCHEMATIC DIAGRAM

- Ref. No.: IR-076 board; 20,000 series See page 5-3 for printed wiring board.

1

2

3

A

B

4-6

BDP-S780- Ref. No.: MB-140 board; 10,000 series

4-7. MB-140 BOARD (CXD9998G-CB/CC)SCHEMATIC DIAGRAM (1/17)

See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

CXD9998G-CB/CC

I

J

4-7

SYSTEM,DDR3 AMB-140

BDP-S7804-8 . MB-140 BOARD (CXD9998G-CB/CC)SCHEMATIC DIAGRAM (2/17)- Ref. No.: MB-140 board; 10,000 series See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

CXD9998G-CB/CC

J

4-8

SYSTEM,DDR3 BMB-140

BDP-S780- Ref. No.: MB-140 board; 10,000 series

4-9. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (3/17) See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

J

The components identied by mark or dotted line with mark are critical for safety. Replace only with part number specied.

4-9

POWERMB-140

BDP-S7804-10. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (4/17) See page 5-4 for printed wiring board.- Ref. No.: MB-140 board; 10,000 series

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

HCXD9998G-CB/CC

I

CXD9998G-CB/CC

J

4-10

CLK/POWER2MB-140

BDP-S7804-11. MB-140 BOARD (CXD9998G- CB/CC) SCHEMATIC DIAGRAM (5/17) - Ref. No.: MB-140 board; 10,000 series See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

J

CXD9998G-CB/CC4-11

FLASH/HOSTMB-140

BDP-S7804-12. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (6/17) - Ref. No.: MB-140 board; 10,000 series See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

CXD9998G-CB/CC

J

4-12

MB-140

USB

BDP-S7804-13. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (7/17) See page 5-4 for printed wiring board.- Ref. No.: MB-140 board; 10,000 series

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

HCXD9998G-CB/CC

I

J

4-13

HDMI

MB-140

BDP-S7804-14.MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (8/17) - Ref. No.: MB-140 board; 10,000 series See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

GCXD9998G-CB/CC

H

I

J

4-14

ETHERNETMB-140

BDP-S7804-15. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (9/17)- Ref. No.: MB-140 board; 10,000 series See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

ECXD9998G-CB/CC

F

G

H

I

J

4-15

AUDIOMB-140

BDP-S7804-16. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (10/17)- Ref. No.: MB-140 board; 10,000 series See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C1 81.3V 5.0V 1.3V

0.3V 2.2V 0.3V

D

2 3 4

70.7V 0.7V 0V 1.9V 1.9V 0V

E

CXD9998G-CB/CC

3.3V 3.3V

6

5

F

G

H

I

J

4-16

VIDEOMB-140

BDP-S7804-17. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (11/17)- Ref. No.: MB-140 board; 10,000 series See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

CXD9998G-CB/CC

I

J

4-17

GPIO/JTAGMB-140

BDP-S780- Ref. No.: MB-140 board; 10,000 series

4-18. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (12/17)

See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

J

The components identied by mark or dotted line with mark are critical for safety. Replace only with part number specied.

4-18

IFCONMB-140

BDP-S780- Ref. No.: MB-140 board; 10,000 series

4-19. MB- 140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (13/17)

See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

J

CXD9998G-CB/CC

4-19

FE OP/GIOMB-140

BDP-S780- Ref. No.: MB-140 board; 10,000 series

4-20. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (14/17) See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

POWER(12V,5V)FB1466 0 2012

MOTOR DRIVERFE_12V_OPUC1466 XX 1608

FE_SW12VC1460 XX 2012 C1412 100 16VFB1470 XX C1470 XX

FE_12V_MFB1462 0 2012 GND2 XX GND1 XX FB1454 0 2012 FB1456 0 2012 C1456 XX 1608 C1454 XX 1608 C1462 XX 1608

(Motor Driver)

FE_GND_MC2401 0.1 16VFB2400 2.2 C2400 0.01

C2455 XX

FE_GND_M

FE_GND_M

(Motor Driver)

SLED2_N SLED2_P P12V_3 SLED1_N

GND

CL1400

GND FE_5V_MVCC (Motor Driver)C2404 1 1608

SL_B FE_5V_D (Digital)CL2406

C2452 XX

FE_SW5VFB1450 0 2012

FE_V14REFFB1458 0 2012 C1458 XX 1608

VREF TEST1 TEST2 TEST3 TEST4 XFG

FE_5V_AVCC

(Analog)

C2407 XX 1608

C2406 0.017

PGND_3 CV3P3 MCOM ISENSE ICOM2 W

C2450 0.150

FE_GND_M C2460 0.1

FE_SPDL_COMR2447 0.16 0.33W RN-CP 1% 2012 R2448 XX 2012 FB2449 XX 2012 R2446 1.8k 1/10W RN-CP 0.5% R2444 1.8k 1/10W RN-CP 0.5% C2495 1 16V B 1608 R2496 1.8k 1/10W RN-CP 0.5%

D

FE_3.3V_D

MOTOR DRIVER(3.3V,1.2V,SA)FE_FGIC1401 TPIC1391DBTRG4LEDO Latch_RSOUT(20k)

CL2410 R2411 XX R2412 XX

CL2411

C2447 XX46

FE_SPDL_WR2494 1.8k 1/10W RN-CP 0.5%

FE_LIMIT30

CL2412

MONITOR P12V_2 XMUTE1 XMUTE2 GC VSLED1 VSLED2 VSPIN VLOAD VTRK VFCS VTLT PGND_1 TLT_P TLT_N P5V_1 FCS_P FCS_N V ICOM1 U P12V_1 C10V P5V_2 AGND_3 TEST6 TEST5 AGND_2 PGND_2 LOAD_N LOAD_P P5V12L TRK_N TRK_P

FE_MUTE1 FE_MUTE2 FE_GAINSW3

CL2413

C2445 XX

FE_SPDL_VR2442 1.8k 1/10W RN-CP 0.5% R2492 1.8k 1/10W RN-CP 0.5%

(200k)

Latch_CLR

(200k)

CSW

FE_5V_DSWR_SEQ1(200k)

SWR_SEQ2

(200k)

TEST1

FE_FMOCL1425

(200k)

F

FE_GAINSW2 FE_GND_M FE_FMO4

CL1407 R1408 XX R1458 XX R1407 47k CL1408 C1408 XX R1409 XX CL1409 R1459 XX C1409 XX CL1410

STEP_ENA

REG3P3V

CL1424

FE_TYPWMGND

LOADING TRK FCS TILT

R2419 XX R2420 XX R2421 XX R2422 XX

C2418 XX CL241919

R2469 XX R2470 XX R2471 XX R2472 XX

C2419 XX CL2420 C2420 XX CL2421 C2421 XX CL2422 C2422 XX

C2439 0.01

C2438 1 1608

1

CN2470 5P WHT

SA_B

STP1_IN

(200k)

PGND_SW

FE_TRO FE_FOO

GND36

STP2_IN

FE_FMO3 FE_V14REF GND FE_3.3V_D

(200k)

REG1PxV

CL1422 CL1421

(1-794-362-51) Tray Mecha 1mm Pitch GNDC2470 0.1

SA_A

FE_GND_M

XLEDON

(200k)

P5V_SW

FE_5V_D

FE_TLO FE_V14REF

C1410 XX R1462 XX R1412 47k R1413 XX CL1412

CSWON

(200k)

FB1PxV

CL1420

FE_FOIN

SA_INIT

COLLIENDZ

FE_CO_AC1417 XX

FE_TILT+ FE_TILT-

STP2-

C2433 0.01 C2432 0.01 C2431 XX C2481 1 16V B 1608 FB2431 XX FB2481 XX

FE_LOAD_N

SA_A

G

CL1413 FB1414 XX

XRESET

FE_CO_A+ FE_CO_B-

FE_LOAD_P

STP2+

FE_CO_AFE_CO_A+ FE_TRFE_CO_BFE_TR+ FE_CO_B+

FE_5V_MVCC FE_GND_M

A5V

C1464 1 1608

C1414 0.0115

STP1-

C1416 XX16

SA_B

AGND

FE_CO_B+

FE_FR+ FE_FR-

C2486 1 1608

C2426 0.0127

STP1+

FB1400 2.2

C1400 0.01

(6-714-902-01)

(6-714-901-01)

H

FE_5V_MVCCC2405 100 16V

FE_TR+ FE_TR-

FE_TR+ FE_TR-

FE_FR+ FE_FR-

FE_FR+ FE_FR-

FE_TILT+ FE_TILT-

FE_TILT+ FE_TILT-

I

J

4-20

FE POWER/MOTOR DRIVEMB-140

OP

GND

1

1

SWR_OUTSEL/XMUTE FB3P3V

FE_DMO

SPDL

CL2418 R2468 XX

FE_LOAD_N

CL2471

2

2

2

R2418 XX

R2467 XX

C2417 XX

C2440 0.139

FE_LOAD_P

CL2472

3

3

3

SLED_A

R2417 XX

C2416 XX CL241717

C2491 XX 3216

CL2473

4

4

4

CSWO

FE_FMO2

SLED_B

R2416 XX R2466 XX

CL2416

5

TRAY-OUT GND TRAY-IN LOAD+ LOAD-

5

5

(1.2V/3.3V/RESET;Not active)27 26

(200k)

C2441 0.01 25V

CL2475

6

E

(200k)

(200k)

CL2415

FE_SPDL_U

CL2496

7

Latch_SET Latch_XRSOUT

CL2414

CL2497

1

AGND_1 SLED1_P

FE_SLED_B+

FE_SPDL_COM

CL2461

2

C

C1450 XX 2012

C1405 100 16V

CA5V

FE_SLED_BFE_SPDL_U

CL2462

3

C2454 1 16V B 1608

C2494 XX 3216

FE_SPDL_V

CL2463

4

CP1

FE_SPDL_W

CL2464

5

C2402 0.1

CP2

FE_SLED_A+

CL2465

6

SL_A55 2

FE_SLED_B+

CL2466

7

C19V

FE_SLED_A-

FE_SLED_B-

CL2467

8

FE_SLED_A+56 1

CL2468

9

B

(LD_Power)

FE_12V_M

FB1460 0 2012

C2412 100 16V

IC2401 TPIC1405ADFDRG4

CN2460 9P WHT

FE_SLED_A-

CL2469

/A A /B B FGND U V W COMMON

(1-820-112-51) SP/SL Connector 1mm Pitch TI U W

54

3 4 5 6 8 9 10 11 12 13

53 52 51 49 48 47 45 44

GND

FE_TRAYIN FE_TRAYOUT FE_GIO8

FE_GIO2

(L;SLOT/H;TRAY)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

43

29 28 25 24 23 22 21 20 19 18 17

14 15 16 18 20 21 22 23 24 25 26 28

LOAD SW CONT/MS_PWB(GND) UNLOAD END SW GND(SWICH COM) LOAD END SW LOAD+ LOADCN2490 XX

42 41 40 38 37 35 34 33 32 31 30 29

(MS_PWB)

(1-785-466-51) Slot Mecha 1mm Pitch

FE_CO_AFE_CO_A+

FE_CO_BFE_CO_B+

BDP-S780- Ref. No.: MB-140 board; 10,000 series

4-21.

MB- 140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (15/17) See page 5-4 for printed wiring board

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

J

4-21

DC FANMB-140

BDP-S7804-22. MB- 140 BOARD (CXD9998G- CB/CC) SCHEMATIC DIAGRAM (16/17) - Ref. No.: MB-140 board; 10,000 series See page 5-4 for printed wiring board.

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

CXD9998G-CB/CC

J

4-22

VIDEO IN/OUTMB-140

BDP-S7804-23. MB-140 BOARD (CXD9998G-CB/CC) SCHEMATIC DIAGRAM (17/17) See page 5-4 for printed wiring board.- Ref. No.: MB-140 board; 10,000 series

1 A

2

3

4

5

6

7

8

9

10

11

12

13

14

B

C

D

E

F

G

H

I

J

CXD9998G-CB/CC

4-23

SATAMB-140

BDP-S780

4-24. WAVEFORMSMB-140 BOARDIC1003 1 (VIN) IC1003 12 (YOUT)

H

1.2 Vp-pH

2.0Vp-p

IC1003 3 (PYIN)

IC100314 (VOUT)

1.0 Vp-pH

H

2.4 Vp-p

IC1003 4 (PBIN)

IC101 A13 (NS_XTAL_I) Vpp 0.7Vp-p 3.3 Vp-p 27 MHz

H

IC1003 5 (PRIN)

H

0.7Vp-p

IC1003 9 (PROUT)

H

1.4Vp-p

IC1003 10 (PBOUT)

1.4Vp-pH

4-24E

BDP-S780SECTION 5 PRINTED WIRING BOARDS 5-1. THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS : Uses unleaded solders. : Pattern from the side which enables seeing. (The other layers patterns are not indicated) Caution: Pattern face side: (SIDE B) Parts face side: (SIDE A) Parts on the pattern face side seen from the pattern face are indicated. Parts on the parts face side seen from the parts face are indicated.

Through hole is omitted. There are few cases that the part printed on diagram isnt mounted in this model. : panel designation Chip parts.C 5 4

Transistor6

5 5 4 4 2

13

Diode3

3

E

B 3 2

1 1

2 1 3 2 3 3 4 2 51 2

1 2

1

5-1

BDP-S780

5-2.

- Ref. No.: FR-313 board; 20,000 series : Uses unleaded solder.

FR-313 BOARD (FRONT RIGHT) PRINTED WIRING BOARD (SIDE A) See page 2-5 for circuit boards location.

There are a few cases that the part isnt mounted in this model is printed on this diagram.

FR-313 BOARD (SIDE A)

BFR-309 BOARD (SIDE A) CN702 CN201 D702 D705 D706 D707 IC701 IC702 A-5 A-6 A-1 A-3 A-3 A-3 A-2 B-4 B-2 B-2 A-2 A-1

A1-771-874- 11

L702 Q706 Q707 Q709

1

2

3

4

5

6

7

FR-313 BOARD (SIDE B)

B

A1-771-87411

1

2

3

45-2

5

6

7

BDP-S7805-3. FL-205 (REAR) BOARD PRINTED WIRING BOARD

- Ref. No.: FL-205 board; 20,000 series : Uses unleaded solder.

See page 2-5 for circuit boards location.There are a few cases that the part isnt mounted in this model is printed on this diagram.

FL-205 BOARD (SIDE A)

A 1FL-205 BOARD (SIDE A) CN331 A-2

2

1-564-012-

11

5-4.

- Ref. No.: IR-076 board; 20,000 series : Uses unleaded solder.

IR-076 (RECEIVER) BOARD PRINTED WIRING BO ARD

See page 2-5 for circuit boards location.There are a few cases that the part isnt mounted in this model is printed on this diagram.

IR-076 BOARD (SIDE A)

A 1IR-076 BOARD (SIDE A) CN401 D401 A-2 A-1

2

1-695-320-

21

5-3

BDP-S7805-4.- Ref. No.: MB-140 board; 10,000 series : Uses unleaded solder.

MB-140 BOARD (MAIN) PRINTED WIRING BOARD (SIDE A) See page 2-5 for circuit boards location.

There are a few cases that the part isnt mounted in this model is printed on this diagram.

MB-140 BOARD (SIDE A)F

E

MB-140 BOARD (SIDE A) CN302 CN603 CN604 CN801 CN1101 CN1102 CN1201 CN1202 CN1203 CN1204 CN1205 CN1301 CN1381 CN1391 CN1503 CN1901 CN2470 CN2490 CN3460 B-5 A-2 E-1 E-3 B-3 C-5 A-4 A-3 A-1 A-4 E-1 D-1 B-1 C-2 E-1 E-5 B-1 B-1 C-1 IC101 IC104 IC105 IC204 IC205 IC306 IC307 IC501 IC502 IC705 IC907 IC1002 IC1003 IC1101 IC1102 IC1202 IC1203 IC1390 IC1451 IC2301 L301 L303 L304 L305 L603 L604 L605 L606 L607 L608 L701 L702 L703 L704 L1001 L1002 L1003 L2322 L2324 Q1502 Q701 X401 X802 X1351 D-4 C-3 C-5 D-5 E-5 F-5 F-2 E-6 E-5 E-4 E-6 F-4 F-4 F-2 F-2 A-5 A-6 E-2 E-1 B-1 B-5 A-2 B-6 B-2 C-3 C-3 C-3 C-3 C-2 C-2 E-3 E-3 E-3 E-3 F-4 G-4 F-4 B-1 B-1 A-4 D-4 D-3 D-3 D-3

D

C

D303 D311 D606 D608 D609 D805 D902 D1004

A-1 A-5 A-2 A-3 A-2 A-2 G-4 G-5

D1201

F-6

B

1-882-883-

11

1

2

3

45-4

5

6

BDP-S7805-6. MB-140 BOARD (MAIN) PRINTED WIRING BOARD (SIDE B) See page 2-5 for circuit boards location.- Ref. No.: MB-140 board; 10,000 series : Uses unleaded solder.

There are a few cases that the part isnt mounted in this model is printed on this diagram.

MB-140 BOARD (SIDE B)

A

BMB-140 BOARD (SIDE B) D304 D306 D305 D607 D904 D1201 D1004 IC301 IC302 IC303 IC304 IC307 IC308 IC310 IC309 IC206 IC501 IC504 IC603 IC601 IC702 IC903 IC1401 IC2401 IC1905 IC2401 D-2 D-2 E-5 A-6 A-5 E-3 A-3 E-1 E-1 A-3 A-4 E-5 D-2 E-2 D-5 E-3 E-5 E-4 A-5 E-4 B-4 C-1 B-5 C-5 B-1 C-5 L308 L306 L1701 L1002 Q907 Q902 Q905 Q1601 Q301 Q1201 E-2 D-1 C-4 A-3 A-4 A-1 A-2 C-1 E-2 E-2

C

D

E1-882-88311

6

5

4

35-5E

2

1

BDP-S780SECTION 6 IC PIN FUNCTION DESCRIPTIONM9 V9 L10 N10 R10 U10 W10 K11 P11 T11 V11 L12 W12 K13 V13 L14 W14 K15 V15 L16 W16 K17 V17 L18 N18 R18 U18 W18 K19 M19 P19 T19 V19 N9, U9, W9, K10, M10, P10 T10, V10 AF10, L11 M11, N11 R11, U11 W11, AB11 K12, M12 N12, P12 R12, T12 U12, V12 AA12, L13 M13, N13 P13, R13 T13, U13 W13, K14 M14, N14 P14, R14 T14, U14 V14, AA14 AE14, L15 M15, N15 P15, R15 T15, U15 W15, K16 M16, N16 P16, R16 T16, U16 V16, AA16 L17, M17 N17, P17 R17, T17 U17, W17 AF17, K18 M18, P18 T18, V18 AA18, L19 N19, R19 U19, W19 AE20, L21 N21, R21 U21, W21 Pin

MAIN SYSTEM CONTROL PIN FUNCTION (MB-140 BOARD IC 101 : CXD9998G-CB/CC)Symbol DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DVCC10_K DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND DGND Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Type 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power 1.15 V digital power Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Digital ground Description

6-1

BDP-S780N25, V25 R26, AA26 AF26 N8 P8 T8 Y8 AA8 J18 J19 J13 J14 H21 J21 AE10 AA11 AA13 AF13 AF14 AA15 AA17 AE17 AA19 Y20 AF20 M21 P21 T21 V21 R25 AA25 P26 V26 AG26 AE23 AD23 AF24 AE24 K21 E15 G15 F15 J24 C15 E14 G14 F14 H22 D15 A13 B13 D14 C14 D10 A12 B12 C12 C11 D11 D12 E10 F10 E12 G11 F13 E13 F12 F11 D19 F18 E19 E18 G17 F19 D18 B19 A19 C18 C19 H24 F24 E26 G23 H23 J23 H26 DGND DGND DGND DVCC33_IO DVCC33_IO DVCC33_IO DCC33_IO_2 DCC33_IO_2 DVCC33_IO_3 DVCC33_IO_3 DVCC33_IO_5 DVCC33_IO_5 DVCC33_IO_S TB DVCC33_IO_S TB DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 DVCC18_IO_1 AVDD12_MEM PLL AVSS12_MEM PLL TN_MEMPLL TP_MEMPLL AVDD10_LDO AVDD12_27MP LL AVDD12_APLL AVDD12_DMP LL AVDD33_LDO AVDD33_XTAL AVSS12_27MP LL AVSS12_APLL AVSS12_DMPL L AVSS33_LDO AVSS33_XTAL NS_XTALI NS_XTALO TN_PLLG TP_PLLG AMUTE AOBCK AOLRCK AOMCLK AOSDATA0 AOSDATA1 AOSDATA2 AOSDATA3 AOSDATA4 MCIN SPBCK SPDATA SPDIF SPLRCK SPMCLK AVDD33_VDA C_BG AVDD33_VDA C_R AVDD33_VDA C_X AVSS33_VDAC _BG AVSS33_VDAC _R AVSS33_VDAC _X FS VDACB_OUT VDACG_OUT VDACR_OUT VDACX_OUT GPIO8 / VOUTCLK1 ETTXER / VOUTD0 ETRXER / VOUTD1 ETTXD0 / VOUTD10 ETTXD1 / VOUTD11 ETTXD2 / VOUTD12 ETTXD3 / VOUTD13 Ground Ground Ground Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Power Ground Analog Analog Power Power Power Power Power Power Ground Ground Ground Ground Ground O I Analog Analog I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O Power Power Power Ground Ground Ground Analog Analog Analog Analog Analog I/O I/O I/O I/O I/O I/O I/O Digital ground Digital ground Digital ground 3.3 V digital IO power 3.3 V digital IO power 3.3 V digital IO power 3.3 V digital IO power 3.3 V digital IO power 3.3 V digital IO power 3.3 V digital IO power 3.3 V digital IO power 3.3 V digital IO power 3.3 V digital IO power for Stand-By Module 3.3 V digital IO power for Stand-By Module 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.8 V / 1.5 V digital IO power 1.2V Analog Power for MEMPLL Analog Ground for MEMPLL Test Pin Test Pin Internal standby power 1.2V Analog Power for PLL 1.2V Analog Power for APLL 1.2V Analog Power for DMPLL 3.3V power for standby 3.3V Analog Power for XTAL Analog Ground for PLL Analog Ground for APLL Analog Ground for DMPLL Analog ground for standby Analog ground for XTAL 27MHz Crystal Out 27MHz Crystal In Test Pin Test Pin NC Audio out bit clock Audio out left-right clock Audio out master clock Audio out serial data 0 NC NC NC NC Microphone in/Line in NC NC SPDIF Out NC NC 3.3V Analog Power 3.3V Analog Power 3.3V Analog Power Analog Ground Analog Ground Analog Ground DAC full scale DAC output DAC output DAC output DAC output NC NC NC NC NC NC NC

6-2

BDP-S780H25 J27 F26 E25 F25 G27 G28 G26 G25 G24 J26 J28 D16 E16 C17 D17 F16 G16 E17 F17 A16 B16 A15 B15 A14 B14 A17 B17 A18 B18 AF5 AH5 AG5 AH4 AF4 AH2 AD5 AG3 AG2 AH1 AF3 AG1 AF2 AF1 AE2 AE1 AE3 AE4 AD4 AG4 AD13 AE19 AF16 AH14 AD18 AD15 AC17 AE16 AH16 AF15 AH17 AD17 AC18 AD16 AG14 AD19 AC15 AD14 AG16 AG24 AH24 AG13 AH13 AE15 AG17 AF18 AE18 AF19 AC22 AF23 AF22 AG22 AH19 AG19 AC20 AD20 ETTXEN / VOUTD14 ETCOL / VOUTD15 ETCRS / VOUTD2 ETRXDV / VOUTD3 ETRXD0 / VOUTD4 ETRXD1 / VOUTD5 ETRXD2 / VOUTD6 ETRXCLK / VOUTD7 ETRXD3 / VOUTD8 ETTXCLK / VOUTD9 ETMDIO / VOUTHSYNC ETMDC / VOUTVSYNC AVDD12_HDMI _TX AVDD12_HDMI _TX AVDD33_HDMI _TX AVDD33_HDMI _TX AVSS12_HDMI