Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
www.windoware.co.nz 1
Setting Standardthe
Motorised Blinds
Motorised Roller Blind Solutions for Hardwired
and Battery Operated Roller Blinds Stuff you
needto know
Re-order 9699
www.windoware.co.nz2
Select
Do you want to connect to a
Home AutomationCBUS/Dynalite
System?
Is the motor to be wired into the mains electricity
Select the Battery Motor icon and select either Left Hand or
Right Hand Motor
Serivce Life of batteryCR2430, service life of battery: > 2 years
Choose either Accendo Roller Fabric Blinds or Accendo Roller Sunscreen
Blinds and select your fabric.
NoYes
How do I order the correct style of Motorised Roller Blind on Windowizard
RechargeableBattery Pole
Standard AA Battery PoleSelect
Left
Right
NoYes
BM Battery Motor
10 RechargableBatteriesRequired
8 StandardBatteriesRequired
www.windoware.co.nz 3
General Information
MOTORISED BLINDS
• This program is available with any of our Roller Blind or Roller Sunscreen Fabrics.• The minimum size for motorised blinds is 750mm wide.• The maximum size for motorised blinds is determined by the width of the fabric, but must stay within 6sqm of fabric. • Our motorised roller blinds can be hard wired into the electrical mains or they can be battery powered. REMOTES
• All motorised blinds come with remotes automatically (with the exception of the home automation units). Codes in this booklet are for ordering extra units.• Each remote can have up to 5 blinds working on a channel if required or a single blind to a single remote, the choice is yours. ELECTRICAL WIRING
• The hardwired motorised program can be operated with a remote or programed into a home computer system.• Full wiring instructions over the page, this can be emailed to a contractor, please contact our Customer Services Team.
BATTERY POLES
• The battery motorised program is available with either standard battery pole or a rechargeable battery pole.• Do not put rechargeable batteries in the standard battery device or vice versa.• Do not mixed rechargeable and standard batteries in the same device.
Note if you have any issues with the instalation or programming your blinds, please contact our Customer Services Team 0800 26 26 20.
We also have links to video’s to step you through each stage of reprogramming of our motorised blinds. These can be found in the brochure at www.windoware.co.nz/productsor at http://www.youtube.com/watch?v=VFGq5XLVdJc
www.windoware.co.nz4
One blind in the room will be working
Press again and another blind in the room will be working
if you want all the blinds in the room working keep pushing the button right until all light are red
If you are reprogramming 1 blind when multiple blinds are on 1 remote, de-power all the other blinds.
Single - channel 5 - Channel emitter emitter
• Power Supply: 3V 1 unit battery
• Each channel can control maximum 20 receivers
• Emission distance: 200 meters outdoor 35 meters indoor
• Emission frequency: 433 90MHz + ookHz
• Working temperature: 0oC ~ + 50oC
General Information - Remotes
Also 15 channelRemote available
Changing Channels on a multi-channel remote
www.windoware.co.nz 5
RECHARGEABLE BATTERY POLE -
GENERAL INFORMATION
8 x Standard AA10 x Rechargeable AA
Rechargeable battery pole12V
Batteries not included in Motor Price
6.5 16.3 L1 L2
39
10
MOTORISED ROLLER BLINDS BATTERY INSTRUCTION
www.windoware.co.nz6
BATTERY POLE INSTALLATION OPTIONS
On the side of the window frame behind the blind
Blind is installed as usual and battery pole can be installed as below.
MOTORISED ROLLER BLINDS BATTERY INSTRUCTION
www.windoware.co.nz 7
MOTORISED ROLLER BLINDS - Hardwired Installation Instructions
FOR THE ELECTRICIAN
Lead installedat pre-wire
40mm
Installation of Electricals for Motorised Blinds
Collect electrical Tails from Retailer/ home owner.
Drill hole as per diagram as close to the glass as possible and 20 mm diameter as tail plug will
be pushed through after installation.
Length of the wire 500 mm of the motor.
IE: 1 hole architrave plate with glan or PCU mech
Isolator
Switch board
1.0 Twin Earth
Ceiling Rose in roof space
Ceiling Rose in roofspace
Ceiling Rose in roof space
Recommend as isolating switch in the switch boardfor remote motors
Blue = Neutral
Brown = Direction
Green/Yellow = Earth
Electrical wire
Standard Motor with no Remote
For this model each motor has to be direct wiredto switch board or C-Bus
Black = Direction
Blue = Neutral
Brown = Live
Green/Yellow = Earth
Electrical wire
Electrical diagram Motorized Blind with Remote
Black = to be tied/cut off
Blind installed by Blind fi tter at a later date
Take lead up into roof space and connect in ceiling rose/ Junction box or in 2 storey heat shrink join cable or take to isolator beside window.Drill the hole in top of pelmet/ceiling 20mm wide.
Pre-made lead
leave 20-30mmhere for installation
www.windoware.co.nz8
Plug to be pushed up through the hole after plugged in
Drill the hole in top of pelmet/ceiling 20mm wide 40mm
Installation of Blinds
Needs a tidy face plate
Blind to be installed and lead from blind motor to be plugged into lead installed at pre-wire and pushed up 20mm hole and
architrave plate fitted
• Blinds to be installed as required, either topfix or facefix ( to the back or sides)• Once installed simply connect the two pieces of wiring, push cord and join up through the drilled hole
17mm 6mm
6.5 16.3 L1 L2
39
10
MOTORISED ROLLER BLINDS - Hardwired Installation Instructions
FOR THE FITTER