Solidcam Mill Tutorial

SOLIDCAM2000 Milling Quick Start

Step 1Loading the Design file

Steps:

Choose the File>Open commands in the Base Modeler to load the file ContourPlate.sat. This file contains the 3D model of the Contour plate and should be located in the folder ...\user\ after the standard installation process.

The outer contour of the plate will be machined using a Profile Job. Start machining the profile at an offset to the contour of 2. With a side step of 1 and then 0.8, SOLIDCAM2000 will prepare the profile. Then the final finishing cut with a cutting depth of 0.2 will clean the profile.

The Pocket will be roughed to a remaining offset on the wall of 0.2 and will then be finished in the last cut.

Step 2Creating the 2DCAM Part

Note! All dimensions in this tutorial are in millimeters. We strongly recommend that you define the working units as millimeters before you start the part. Click here for an explanation on how to define it.

In the SOLIDCAM Manager, click with the right mouse button on the field Part and select New>Milling.

In the Part data dialog, enter 2DCAM as the Part name and click on OK.

SOLIDCAM2000 creates the Part and the fields in the lower section of the dialog will be activated.

Step 2.1 Defining the Home position

Click on the Home button.

Move the cursor to the corner of the model where theorigin of the global coordinate system is located. Snap to this point to choose it as the home origin. Left click on themouse to confirm.

Set the Part Upper Plane by clicking on the Part UpperPlane button. Click on a point on the top face of the model. Press OK in the Pick Part Upper Plane dialog. You should see "0" in the Part Upper Plane window.

Set the Part Lower Plane by clicking on the Part LowerPlane button. Click on a point on the bottom face of the model.

Press OK in the Pick Part Lower Plane dialog. You should see "-30" in the Part Lower Plane window.

Confirm the Home data dialog with OK.

Close the Home Edit dialog with Finish.

Save & Exit the Part data dialog.


(powered by Base Modeler)

Step 3

Adding a 2.5D Profile Job

Right click on the field Jobs and select the commands Add > Profile.

The Profile Job screen will be displayed.

Click on the Define button in the Geometry section to define the geometry that describes the profile contour.

Step 3.1

Defining the Profile Geometry

Click on the Add chain button of the Geometry Edit dialog.

In the Chain Options dialog, choose the Auto select > Constant Z option.

When the edit bar prompts you to "Pick start curve", click on Edge 1 of the outside model contour. The edge will be highlighted, indicating the start point of the chain.

You will be prompted to "Pick point in chain direction". Click on Edge 2 to indicate the direction.

SOLIDCAM2000 will now trace the contour of the plate and display the message OK to accept? Confirm by clicking on Yes.

Click on the Finish button of the Geometry Edit dialog.

Enter Profile in the Geometry name dialog and confirm with OK.



Step 3.2

Selecting the tool

Click on the Data button in the Tool area to define the tool used for this machining operation.

As in the previous exercises, select a tool from the user-defined tool table.

Click on the Other tool table button in the field Select tool from:.

Mark the tool table QuickStart with the mouse and load it by clicking on Open.

Select Tool number 4 from the tool table, which has a diameter 18 end mill with a corner radius 0.

Copy all the tool parameters to the job by clicking on Load & Exit.

Close the Tool data dialog with OK.

SOLIDCAM2000 Milling (powered by Base

Quick Start Modeler)

Step 3.3Specifying Offsets and the Cutting direction

Offset on profile: A finish offset of 0.2 should remain on the outer contour.

Finish: The Profile offset of 0.2 will be removed in the last cut (at full cutting depths). In case you select None, the profile offset of 0.2 would actually remain on the contour.

Clear offset: Machining starts at an offset distance of 2 from the contour and continues at side

steps of 1.

You have selected the profile geometry in the clockwise direction. Therefore the tool has to move on the LEFT side of the geometry to machine the profile part on the outside. WithShowTool you can graphically check the location of the tool relative to the profile direction. Control the tool side to make sure the outside of the contour will be machined.

Activate the Compensation field. When the fieldCompensation is activated,

SOLIDCAM2000 will use the tool radius compensation commands in the G-Code output.



Step 3.4Specifying the Approach movements

For both fields, Approach and Retreat, select the ARC option with value 5. In the arc option, the value defines the radius with which the tool will approach/retreat from the contour. SOLIDCAM2000 supports various other strategies on how to move into/from the material.

The Define start option enables you to choose any point on the contour to define where you want to begin machining. Snap on a point along the profile chain to define the start point.

The Default start button will automatically select the start point of the selected chain as the approach point of the contour.

Generate the toolpath with Save & Calculate. After SOLIDCAM2000 has completed the calculation, return to the CAM Manager by clicking on Exit.



Step 4

Adding a 2.5D Pocket Job

With the right mouse button, click on the field of the recently created profile F_Profile_T1.

Select the commands Add > Pocket.

The Pocket Job screen is displayed.

Click on the Define button in the Geometry section to select the geometry

that describes the pocket contour.

In SOLIDCAM you always have to define the outer contour of the pocket first. Closed profiles inside this outer contour are automatically identified as pocket islands.

Use the Add chain > Auto select > Constant-Z option and define the first chain.

Add chain and select the Island, again using the Constant-Z option.

Close the Geometry Edit dialog with Finish. The Geometry name dialog will be displayed.

Enter pocket for the Geometry name and confirm the dialog with OK.



Step 4.1Selecting the tool and the milling levels

In the section Tool > Data, select the tool for the job again.

In the Tool data dialog, go to Select tool from:> Current tool table to display the QuickStart tool table and choose Tool Number: 5, an End mill with a diameter of 14 mm.

Copy all the tool parameters to the tool data dialog by clicking on Load & Exit.

Close the Tool data

dialog with OK.

The machining is alwas performed in the negative Z direction entering positive values for depth and down steps. The pocket is20 mm deep and will be machined with single down steps of 5mm each.

You can also use the buttons to pick the Z-values from the model.

Step 4.

Pocket Parameters

2

In SOLIDCAM2000, you can define separate offsets remaining on the wall and the floor of the pocket and on the pocket islands.

Set all values to 0.2.

You can also specify whether you want to leave each offset on the part or you want to remove it up to the original contour with one last finishing cut.

In the list field select the options WALL+FLOOR.

Make sure that all parameters on your screen are identical to the job screen below.

Generate the toolpath with Save & Calculate. Use the Exit button to return to the SolidCAM Manager after SOLIDCAM2000 has completed the calculation.



Step 5Simulating the 2.5D Jobs

Now simulate both Jobs using the the Verify on stockoptions.



Step 6G-code examples for the Fanuc controller

If you have an evaluation version with a software protection lock or

a fully licensed version of SOLIDCAM2000, you can use the G-code > Generate command to produce actual NC-programs.

In SOLIDCAM2000, you can select a different CNC-controller and generate a DIN/ISO G-code file without changing any settings for the job.

Listed below is the complete NC-program for a Fanuc controller for the pocket and profile job.

Warning!

G-code cannot be generated in the Demo version of SOLIDCAM2000.

%O5000 (2DCAM.TAP)( MCV-OP ) (29-AUG-2000)(SUBROUTINES: O1 .. O7) G90 G17G80 G49 G40

G1 Y27.01X142.99Y53.812X128.812 Y67.99X125.393G2 X125.393 Y27.01

G54M98 P9011M01N1 M6 T1(TOOL -1- MILL DIA 18.0 R0. MM )G90 G00 G40 G54G43 H1 D31 G0 X-16. Y93.75 Z70. S1000 M3M8(----------------------)(F-PROFILE-T1 - PROFILE)(----------------------)G0 X-16. Y93.75 Z50.Z2.G1 Z-9. F33G1 X-16. Y98.75 F100G2 X-11. Y93.75 R5.G1 Y0.G3 X0. Y-11. R11.G1 X170.G3 X181. Y0. R11.G1 Y65.

R34.61G1 X133.804Y22.11X147.89Y55.842X130.842 Y72.89X120.G2 X109.724 Y74.579 R32.11X112.928 Y22.11 R29.71G1 X133.804X124.228 Y34.528G3 X95.855 Y77.164 R29.71G2 X91.302 Y77.229 R32.79G1 X80.345 Y91.437G2 X78.09 Y105. R41.91G1 Y113.09X60.349G2 X73.54 Y99.494 R32.01G3 X80.345 Y91.437 R22.99

G3 X177.778 Y72.778 R11.G1 X147.778 Y102.778G3 X140. Y106. R11.G1 X121.Y125.G3 X90. Y156. R31.G1 X20.G3 X-11. Y125. R31.G1 Y93.75X-10.Y0.G3 X0. Y-10. R10.G1 X170.G3 X180. Y0. R10.G1 Y65.G3 X177.071 Y72.071 R10.G1 X147.071 Y102.071G3 X140. Y105. R10.G1 X120.Y125.G3 X90. Y155. R30.

G1 X77.427 Y87.501G3 X90.849 Y82.197 R27.89G2 X82.99 Y105. R37.01G1 Y117.99X27.01Y105.281G2 X69.172 Y97.275 R27.11G3 X77.427 Y87.501 R27.89G1 X73.951 Y83.987G2 X64.803 Y95.057 R32.79G3 X23.466 Y79.561 R22.21X38.846 Y48.502 R82.21G1 X31.91 Y41.491Y31.91X40.953G2 X31.91 Y41.491 R92.01G1 X35.705 Y44.591G2 X27.01 Y57.416 R87.11

G1 X20.G3 X-10. Y125. R30.G1 Y93.75X-9.2Y0.G3 X0. Y-9.2 R9.2G1 X170.G3 X179.2 Y0. R9.2G1 Y65.G3 X176.505 Y71.505 R9.2G1 X146.505 Y101.505G3 X140. Y104.2 R9.2G1 X120.G2 X119.2 Y105. R0.8G1 Y125.G3 X90. Y154.2 R29.2G1 X20.G3 X-9.2 Y125. R29.2G1 Y93.75G2 X-14.2 Y88.75 R5.G1 Y93.75G0 Z50.

G1 Y27.01X55.159G2 X35.705 Y44.591 R87.11G1 X51.411 Y35.824G3 X75.981 Y22.11 R82.21G2 X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79G2 X94.289 Y17.964 R-29.71X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79G2 X106.9 Y75.684 R29.71X87.89 Y105. R32.11G1 Y122.89X22.11Y22.11X75.981

X-16.Z-7.G1 Z-18. F33G1 X-16. Y98.75 F100G2 X-11. Y93.75 R5.G1 Y0.G3 X0. Y-11. R11.G1 X170.G3 X181. Y0. R11.G1 Y65.G3 X177.778 Y72.778 R11.G1 X147.778 Y102.778G3 X140. Y106. R11.G1 X121.Y125.G3 X90. Y156. R31.G1 X20.G3 X-11. Y125. R31.G1 Y93.75X-10.Y0.G3 X0. Y-10. R10.

Y17.21X150.G3 X152.79 Y20. R2.79G1 Y57.871X132.871 Y77.79X120.G2 X92.79 Y105. R27.21G1 Y125.G3 X90. Y127.79 R2.79G1 X20.G3 X17.21 Y125. R2.79G1 Y20.G3 X20. Y17.21 R2.79G1 X75.981G0 Z50.X133.804 Y31.91Z-8.G1 Z-15. F200G1 X138.09 Y31.91 F600Y51.782X136.584 Y53.289G2 X133.804 Y31.91 R39.51

G1 X170.G3 X180. Y0. R10.G1 Y65.G3 X177.071 Y72.071 R10.G1 X147.071 Y102.071G3 X140. Y105. R10.G1 X120.Y125.G3 X90. Y155. R30.G1 X20.G3 X-10. Y125. R30.G1 Y93.75X-9.2Y0.G3 X0. Y-9.2 R9.2G1 X170.G3 X179.2 Y0. R9.2G1 Y65.G3 X176.505 Y71.505 R9.2G1 X146.505 Y101.505G3 X140. Y104.2 R9.2

G1 Y27.01X142.99Y53.812X128.812 Y67.99X125.393G2 X125.393 Y27.01 R34.61G1 X133.804Y22.11X147.89Y55.842X130.842 Y72.89X120.G2 X109.724 Y74.579 R32.11X112.928 Y22.11 R29.71G1 X133.804X124.228 Y34.528G3 X95.855 Y77.164 R29.71G2 X91.302 Y77.229 R32.79G1 X80.345 Y91.437

G1 X120.G2 X119.2 Y105. R0.8G1 Y125.G3 X90. Y154.2 R29.2G1 X20.G3 X-9.2 Y125. R29.2G1 Y93.75G2 X-14.2 Y88.75 R5.G1 Y93.75G0 Z50.X-16.Z-16.G1 Z-27. F33G1 X-16. Y98.75 F100G2 X-11. Y93.75 R5.G1 Y0.G3 X0. Y-11. R11.G1 X170.G3 X181. Y0. R11.G1 Y65.G3 X177.778 Y72.778 R11.G1 X147.778 Y102.778

G2 X78.09 Y105. R41.91G1 Y113.09X60.349G2 X73.54 Y99.494 R32.01G3 X80.345 Y91.437 R22.99G1 X77.427 Y87.501G3 X90.849 Y82.197 R27.89G2 X82.99 Y105. R37.01G1 Y117.99X27.01Y105.281G2 X69.172 Y97.275 R27.11G3 X77.427 Y87.501 R27.89G1 X73.951 Y83.987G2 X64.803 Y95.057 R32.79G3 X23.466 Y79.561 R22.21X38.846 Y48.502 R82.21

G3 X140. Y106. R11.G1 X121.Y125.G3 X90. Y156. R31.G1 X20.G3 X-11. Y125. R31.G1 Y93.75X-10.Y0.G3 X0. Y-10. R10.G1 X170.G3 X180. Y0. R10.G1 Y65.G3 X177.071 Y72.071 R10.G1 X147.071 Y102.071G3 X140. Y105. R10.G1 X120.Y125.G3 X90. Y155. R30.G1 X20.G3 X-10. Y125. R30.G1 Y93.75

G1 X31.91 Y41.491Y31.91X40.953G2 X31.91 Y41.491 R92.01G1 X35.705 Y44.591G2 X27.01 Y57.416 R87.11G1 Y27.01X55.159G2 X35.705 Y44.591 R87.11G1 X51.411 Y35.824G3 X75.981 Y22.11 R82.21G2 X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79G2 X94.289 Y17.964 R-29.71X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79

X-9.2Y0.G3 X0. Y-9.2 R9.2G1 X170.G3 X179.2 Y0. R9.2G1 Y65.G3 X176.505 Y71.505 R9.2G1 X146.505 Y101.505G3 X140. Y104.2 R9.2G1 X120.G2 X119.2 Y105. R0.8G1 Y125.G3 X90. Y154.2 R29.2G1 X20.G3 X-9.2 Y125. R29.2G1 Y93.75G2 X-14.2 Y88.75 R5.G1 Y93.75G0 Z50.X-16.Z-25.G1 Z-30. F33

G2 X106.9 Y75.684 R29.71X87.89 Y105. R32.11G1 Y122.89X22.11Y22.11X75.981Y17.21X150.G3 X152.79 Y20. R2.79G1 Y57.871X132.871 Y77.79X120.G2 X92.79 Y105. R27.21G1 Y125.G3 X90. Y127.79 R2.79G1 X20.G3 X17.21 Y125. R2.79G1 Y20.G3 X20. Y17.21 R2.79G1 X75.981G0 Z50.X133.804 Y31.91Z-13.

G1 X-16. Y98.75 F100G2 X-11. Y93.75 R5.G1 Y0.G3 X0. Y-11. R11.G1 X170.G3 X181. Y0. R11.G1 Y65.G3 X177.778 Y72.778 R11.G1 X147.778 Y102.778G3 X140. Y106. R11.G1 X121.Y125.G3 X90. Y156. R31.G1 X20.G3 X-11. Y125. R31.G1 Y93.75X-10.Y0.G3 X0. Y-10. R10.G1 X170.G3 X180. Y0. R10.G1 Y65.

G1 Z-19.8 F200G1 X138.09 Y31.91 F600Y51.782X136.584 Y53.289G2 X133.804 Y31.91 R39.51G1 Y27.01X142.99Y53.812X128.812 Y67.99X125.393G2 X125.393 Y27.01 R34.61G1 X133.804Y22.11X147.89Y55.842X130.842 Y72.89X120.G2 X109.724 Y74.579 R32.11X112.928 Y22.11 R29.71G1 X133.804

G3 X177.071 Y72.071 R10.G1 X147.071 Y102.071G3 X140. Y105. R10.G1 X120.Y125.G3 X90. Y155. R30.G1 X20.G3 X-10. Y125. R30.G1 Y93.75X-9.2Y0.G3 X0. Y-9.2 R9.2G1 X170.G3 X179.2 Y0. R9.2G1 Y65.G3 X176.505 Y71.505 R9.2G1 X146.505 Y101.505G3 X140. Y104.2 R9.2G1 X120.G2 X119.2 Y105. R0.8G1 Y125.

X124.228 Y34.528G3 X95.855 Y77.164 R29.71G2 X91.302 Y77.229 R32.79G1 X80.345 Y91.437G2 X78.09 Y105. R41.91G1 Y113.09X60.349G2 X73.54 Y99.494 R32.01G3 X80.345 Y91.437 R22.99G1 X77.427 Y87.501G3 X90.849 Y82.197 R27.89G2 X82.99 Y105. R37.01G1 Y117.99X27.01Y105.281G2 X69.172 Y97.275 R27.11G3 X77.427 Y87.501 R27.89

G3 X90. Y154.2 R29.2G1 X20.G3 X-9.2 Y125. R29.2G1 Y93.75G2 X-14.2 Y88.75 R5.G1 Y93.75G1 X-14.2 Y98.95 F100G2 X-9. Y93.75 R5.2G1 Y0.G3 X0. Y-9. R9.G1 X170.G3 X179. Y0. R9.G1 Y65.G3 X176.364 Y71.364 R9.G1 X146.364 Y101.364G3 X140. Y104. R9.G1 X120.G2 X119. Y105. R1.G1 Y125.G3 X90. Y154. R29.G1 X20.G3 X-9. Y125. R29.G1 Y93.75

G1 X73.951 Y83.987G2 X64.803 Y95.057 R32.79G3 X23.466 Y79.561 R22.21X38.846 Y48.502 R82.21G1 X31.91 Y41.491Y31.91X40.953G2 X31.91 Y41.491 R92.01G1 X35.705 Y44.591G2 X27.01 Y57.416 R87.11G1 Y27.01X55.159G2 X35.705 Y44.591 R87.11G1 X51.411 Y35.824G3 X75.981 Y22.11 R82.21G2 X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79

G2 X-14.2 Y88.55 R5.2G1 Y93.75G0 Z50.M98 P9011M01N2 M6 T2(TOOL -2- MILL DIA 14.0 R0. MM )G90 G00 G40 G54G43 H2 D32 G0 X133.804 Y31.91 Z70. S1800 M3M8(--------------------)(P-POCKET-T2 - POCKET)(--------------------)G0 X133.804 Y31.91 Z50.Z2.G1 Z-5. F200G1 X138.09 Y31.91 F600Y51.782X136.584 Y53.289G2 X133.804 Y31.91 R39.51

G2 X94.289 Y17.964 R-29.71X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79G2 X106.9 Y75.684 R29.71X87.89 Y105. R32.11G1 Y122.89X22.11Y22.11X75.981Y17.21X150.G3 X152.79 Y20. R2.79G1 Y57.871X132.871 Y77.79X120.G2 X92.79 Y105. R27.21G1 Y125.G3 X90. Y127.79 R2.79G1 X20.G3 X17.21 Y125. R2.79

G1 Y27.01X142.99Y53.812X128.812 Y67.99X125.393G2 X125.393 Y27.01 R34.61G1 X133.804Y22.11X147.89Y55.842X130.842 Y72.89X120.G2 X109.724 Y74.579 R32.11X112.928 Y22.11 R29.71G1 X133.804X124.228 Y34.528G3 X95.855 Y77.164 R29.71G2 X91.302 Y77.229 R32.79G1 X80.345 Y91.437

G1 Y20.G3 X20. Y17.21 R2.79G1 X75.981G0 Z50.X133.804 Y31.91Z-17.8G1 Z-20. F200G1 X138.09 Y31.91 F600Y51.782X136.584 Y53.289G2 X133.804 Y31.91 R39.51G1 Y27.01X142.99Y53.812X128.812 Y67.99X125.393G2 X125.393 Y27.01 R34.61G1 X133.804Y22.11X147.89Y55.842

G2 X78.09 Y105. R41.91G1 Y113.09X60.349G2 X73.54 Y99.494 R32.01G3 X80.345 Y91.437 R22.99G1 X77.427 Y87.501G3 X90.849 Y82.197 R27.89G2 X82.99 Y105. R37.01G1 Y117.99X27.01Y105.281G2 X69.172 Y97.275 R27.11G3 X77.427 Y87.501 R27.89G1 X73.951 Y83.987G2 X64.803 Y95.057 R32.79G3 X23.466 Y79.561 R22.21

X130.842 Y72.89X120.G2 X109.724 Y74.579 R32.11X112.928 Y22.11 R29.71G1 X133.804X124.228 Y34.528G3 X95.855 Y77.164 R29.71G2 X91.302 Y77.229 R32.79G1 X80.345 Y91.437G2 X78.09 Y105. R41.91G1 Y113.09X60.349G2 X73.54 Y99.494 R32.01G3 X80.345 Y91.437 R22.99G1 X77.427 Y87.501G3 X90.849 Y82.197 R27.89G2 X82.99 Y105. R37.01G1 Y117.99

X38.846 Y48.502 R82.21G1 X31.91 Y41.491Y31.91X40.953G2 X31.91 Y41.491 R92.01G1 X35.705 Y44.591G2 X27.01 Y57.416 R87.11G1 Y27.01X55.159G2 X35.705 Y44.591 R87.11G1 X51.411 Y35.824G3 X75.981 Y22.11 R82.21G2 X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79G2 X94.289 Y17.964 R-29.71

X27.01Y105.281G2 X69.172 Y97.275 R27.11G3 X77.427 Y87.501 R27.89G1 X73.951 Y83.987G2 X64.803 Y95.057 R32.79G3 X23.466 Y79.561 R22.21X38.846 Y48.502 R82.21G1 X31.91 Y41.491Y31.91X40.953G2 X31.91 Y41.491 R92.01G1 X35.705 Y44.591G2 X27.01 Y57.416 R87.11G1 Y27.01X55.159G2 X35.705 Y44.591 R87.11G1 X51.411 Y35.824

X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79G2 X106.9 Y75.684 R29.71X87.89 Y105. R32.11G1 Y122.89X22.11Y22.11X75.981Y17.21X150.G3 X152.79 Y20. R2.79G1 Y57.871X132.871 Y77.79X120.G2 X92.79 Y105. R27.21G1 Y125.G3 X90. Y127.79 R2.79G1 X20.G3 X17.21 Y125. R2.79G1 Y20.

G3 X75.981 Y22.11 R82.21G2 X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79G2 X94.289 Y17.964 R-29.71X23.466 Y79.561 R82.21X64.803 Y95.057 R22.21G3 X95.855 Y77.164 R32.79G2 X106.9 Y75.684 R29.71X87.89 Y105. R32.11G1 Y122.89X22.11Y22.11X75.981Y17.21X150.G3 X152.79 Y20. R2.79G1 Y57.871X132.871 Y77.79

G3 X20. Y17.21 R2.79G1 X75.981G0 Z50.X133.804 Y31.91Z-3.G1 Z-10. F200G1 X138.09 Y31.91 F600Y51.782X136.584 Y53.289G2 X133.804 Y31.91 R39.51

X120.G2 X92.79 Y105. R27.21G1 Y125.G3 X90. Y127.79 R2.79G1 X20.G3 X17.21 Y125. R2.79G1 Y20.G3 X20. Y17.21 R2.79G1 X75.981G1 X75.981 Y17.01 F600G41 G1 Y10.X150.G3 X160. Y20. R10.G1 Y60.858X135.858 Y85.X120.G2 X100. Y105. R20.G1 Y125.G3 X90. Y135. R10.G1 X20.G3 X10. Y125. R10.G1 Y20.G3 X20. Y10. R10.

G1 X75.981G40 G1 Y17.01X77.49 Y21.598G41 G1 X79.742 Y28.447G2 X30.457 Y81.327 R75.X58.374 Y91.792 R15.G3 X96.254 Y69.965 R40.G2 X95.069 Y25.132 R-22.5X79.742 Y28.447 R75.G40 G1 X77.555 Y21.796G0 Z50.M98 P9010M30%

Step 6.1

G-code examples for the Heidenhain controller

Customized SOLIDCAM2000 post-processors eliminate manual G-code editing and are available for all CNC-

Contollers.

Listed below is the complete NC-program, for a Heidenhain controller including sub-routines, for the pocket and profile job.

Warning!

G-code cannot be generated in the Demo version of SOLIDCAM2000.

0 BEGIN PGM 1000 MM1 BLK FORM 0.1 Z X+0.000 Y+0.000 Z+0.0002 BLK FORM 0.2 X+0.000 Y+0.000 Z+0.0003 TOOL CALL 1 Z S 12504 L X+186.000 Y+48.750 Z+70.000 R0 F MAX M135 CALL LBL 1 REP 6 L Z+100.000 R0 F MAX M05

119 L Z+50.000 R F MAX M120 L X+133.804 Y+31.910 R F MAX M121 L Z-17.800 R F MAX M122 L Z-20.000 R F200 M123 CALL LBL 6 REP 124 CALL LBL 7 REP 125 L Z+50.000 R F MAX M126 LBL 0127 LBL 6 128 L X+138.090 Y+31.910 R F600 M

7 TOOL CALL 2 Z S 20008 L X+133.804 Y+31.910 Z+70.000 R0 F MAX M139 CALL LBL 2 REP 10 L Z+100.000 R F MAX M0911 M3012 LBL 1 13 L X+186.000 Y+48.750 Z+50.000 R F MAX M14 L Z+2.000 R F MAX M15 L Z-9.000 R F80 M16 CALL LBL 4 REP 17 L Z+50.000 R F MAX M18 L X+186.000 R F MAX M19 L Z-7.000 R F MAX M20 L Z-18.000 R F80 M21 CALL LBL 4 REP 22 L Z+50.000 R F MAX M23 L X+186.000 R F MAX M24 L Z-16.000 R F MAX M

129 L Y+51.782 R F M130 L X+136.584 Y+53.289 R F M131 CR X+133.804 Y+31.910 R39.510 DR- R F M132 L Y+27.010 R F M133 L X+142.990 R F M134 L Y+53.812 R F M135 L X+128.812 Y+67.990 R F M136 L X+125.393 R F M137 CR X+125.393 Y+27.010 R34.610 DR- R F M138 L X+133.804 R F M139 L Y+22.110 R F M140 L X+147.890 R F M141 L Y+55.842 R F M142 L X+130.842 Y+72.890 R F M143 L X+120.000 R F M144 CR X+109.724

25 L Z-27.000 R F80 M26 CALL LBL 4 REP 27 L Z+50.000 R F MAX M28 L X+186.000 R F MAX M29 L Z-25.000 R F MAX M30 L Z-30.000 R F80 M31 CALL LBL 4 REP 32 CALL LBL 5 REP 33 L Z+50.000 R F MAX M34 LBL 035 LBL 4 36 L X+186.000 Y+53.750 R F300 M37 CR X+181.000 Y+48.750 R5.000 DR+ R F M38 L Y-9.200 R F M39 CR X+179.200 Y-11.000 R1.800 DR- R F M40 L X-9.200 R F M41 CR X-11.000 Y-9.200 R1.800 DR- R F M

Y+74.579 R32.110 DR- R F M145 CR X+112.928 Y+22.110 R29.710 DR- R F M146 L X+133.804 R F M147 L X+124.270 Y+34.615 R F M148 CR X+97.264 Y+77.209 R29.710 DR+ R F M149 CR X+91.493 Y+77.606 R37.790 DR- R F M150 L X+79.903 Y+92.808 R F M151 CR X+78.090 Y+105.000 R41.910 DR- R F M152 L Y+113.090 R F M153 L X+60.349 R F M154 CR X+72.722 Y+101.004 R32.010 DR- R F

42 L Y+125.000 R F M43 CR X+20.000 Y+156.000 R31.000 DR- R F M44 L X+90.000 R F M45 CR X+121.000 Y+125.000 R31.000 DR- R F M46 L Y+106.000 R F M47 L X+143.811 R F M48 CR X+145.084 Y+105.473 R1.800 DR- R F M49 L X+180.473 Y+70.084 R F M50 CR X+181.000 Y+68.811 R1.800 DR- R F M51 L Y+48.750 R F M52 L X+180.000 R F M53 L Y-9.200 R F M54 CR X+179.200 Y-10.000 R0.800 DR- R F M

M155 CR X+79.903 Y+92.808 R27.990 DR+ R F M156 L X+76.916 Y+88.923 R F M157 CR X+90.412 Y+82.767 R32.890 DR+ R F M158 CR X+82.990 Y+105.000 R37.010 DR- R F M159 L Y+117.990 R F M160 L X+27.010 R F M161 L Y+105.281 R F M162 CR X+68.479 Y+98.554 R27.110 DR- R F M163 CR X+76.916 Y+88.923 R32.890 DR+ R F M164 L X+73.527 Y+85.352 R F M

55 L X-9.200 R F M56 CR X-10.000 Y-9.200 R0.800 DR- R F M57 L Y+125.000 R F M58 CR X+20.000 Y+155.000 R30.000 DR- R F M59 L X+90.000 R F M60 CR X+120.000 Y+125.000 R30.000 DR- R F M61 L Y+105.000 R F M62 L X+143.811 R F M63 CR X+144.376 Y+104.766 R0.800 DR- R F M64 L X+179.766 Y+69.376 R F M65 CR X+180.000 Y+68.811 R0.800 DR- R F M66 L Y+48.750 R F M67 L X+170.200 RL F M

165 CR X+64.235 Y+96.104 R37.790 DR- R F M166 CR X+23.466 Y+79.561 R22.210 DR+ R F M167 CR X+38.717 Y+48.665 R82.210 DR+ R F M168 L X+31.910 Y+41.491 R F M169 L Y+31.910 R F M170 L X+40.953 R F M171 CR X+31.910 Y+41.491 R92.010 DR- R F M172 L X+27.010 R F M173 L Y+27.010 R F M174 L X+55.159 R F M175 CR X+46.007 Y+33.964 R87.110 DR- R F M176 CR X+27.010

68 L Y-0.200 R F M69 L X-0.200 R F M70 L Y+125.000 R F M71 CR X+20.000 Y+145.200 R20.200 DR- R F M72 L X+90.000 R F M73 CR X+110.200 Y+125.000 R20.200 DR- R F M74 L Y+105.000 R F M75 CR X+120.000 Y+95.200 R9.800 DR+ R F M76 L X+140.083 R F M77 L X+170.200 Y+65.083 R F M78 L Y+48.750 R F M79 CR X+184.200 Y+34.750 R14.000 DR+ R F M80 L Y+48.750 R0 F M81 LBL 0

Y+57.416 R87.110 DR- R F M177 L Y+41.491 R F M178 L X+69.907 Y+24.514 R F M179 CR X+75.981 Y+22.110 R82.210 DR+ R F M180 CR X+49.223 Y+37.662 R82.210 DR- R F M181 CR X+23.466 Y+79.561 R82.210 DR- R F M182 CR X+64.235 Y+96.104 R22.210 DR- R F M183 CR X+97.264 Y+77.209 R37.790 DR+ R F M184 CR X+94.289 Y+17.964 R-29.710 DR- R F M

82 LBL 5 83 L X+184.200 Y+62.950 RL F300 M84 CR X+170.000 Y+48.750 R14.200 DR+ R F M85 L Y+0.000 R F M86 L X+0.000 R F M87 L Y+125.000 R F M88 CR X+20.000 Y+145.000 R20.000 DR- R F M89 L X+90.000 R F M90 CR X+110.000 Y+125.000 R20.000 DR- R F M91 L Y+105.000 R F M92 CR X+120.000 Y+95.000 R10.000 DR+ R F M93 L X+140.000 R F M94 L X+170.000 Y+65.000 R F M

185 CR X+75.981 Y+22.110 R82.210 DR- R F M186 CR X+49.223 Y+37.662 R82.210 DR- R F M187 CR X+23.466 Y+79.561 R82.210 DR- R F M188 CR X+64.235 Y+96.104 R22.210 DR- R F M189 CR X+97.264 Y+77.209 R37.790 DR+ R F M190 CR X+106.900 Y+75.684 R29.710 DR- R F M191 CR X+87.890 Y+105.000 R32.110 DR- R F M192 L Y+122.890 R F M193 L X+22.110 R F M

95 L Y+48.750 R F M96 CR X+184.200 Y+34.550 R14.200 DR+ R F M97 L Y+48.750 R0 F M98 LBL 099 LBL 2 100 L X+133.804 Y+31.910 Z+50.000 R F MAX M101 L Z+2.000 R F MAX M102 L Z-5.000 R F200 M103 CALL LBL 6 REP 104 L Z+50.000 R F MAX M105 L X+133.804 Y+31.910 R F MAX M106 L Z-3.000 R F MAX M107 L Z-10.000 R F200 M108 CALL LBL 6 REP 109 L Z+50.000 R F MAX M110 L X+133.804

194 L Y+22.110 R F M195 L X+75.981 R F M196 L Y+17.210 R F M197 L X+150.000 R F M198 CR X+152.790 Y+20.000 R2.790 DR+ R F M199 L Y+57.871 R F M200 L X+132.871 Y+77.790 R F M201 L X+120.000 R F M202 CR X+92.790 Y+105.000 R27.210 DR- R F M203 L Y+125.000 R F M204 CR X+90.000 Y+127.790 R2.790 DR+ R F M205 L X+20.000 R F M206 CR X+17.210 Y+125.000 R2.790 DR+ R F M207 L Y+20.000 R F M

Y+31.910 R F MAX M111 L Z-8.000 R F MAX M112 L Z-15.000 R F200 M113 CALL LBL 6 REP 114 L Z+50.000 R F MAX M115 L X+133.804 Y+31.910 R F MAX M116 L Z-13.000 R F MAX M117 L Z-19.800 R F200 M118 CALL LBL 6 REP

208 CR X+20.000 Y+17.210 R2.790 DR+ R F M209 L X+75.981 R F M210 LBL 0211 LBL 7 212 L X+75.981 Y+17.010 R F600 M213 L Y+10.000 RL F M214 L X+150.000 R F M215 CR X+160.000 Y+20.000 R10.000 DR+ R F M216 L Y+60.858 R F M217 L X+135.858 Y+85.000 R F M218 L X+120.000 R F M219 CR X+100.000 Y+105.000 R20.000 DR- R F M220 L Y+125.000 R F M221 CR X+90.000 Y+135.000 R10.000 DR+ R

F M222 L X+20.000 R F M223 CR X+10.000 Y+125.000 R10.000 DR+ R F M224 L Y+20.000 R F M225 CR X+20.000 Y+10.000 R10.000 DR+ R F M226 L X+75.981 R F M227 L Y+17.010 R0 F M228 L X+77.490 Y+21.598 R F M229 L X+79.742 Y+28.447 RL F M230 CR X+53.954 Y+43.102 R75.000 DR- R F M231 CR X+30.457 Y+81.327 R75.000 DR- R F M232 CR X+57.991 Y+92.499 R15.000 DR- R F

M233 CR X+97.321 Y+69.999 R45.000 DR+ R F M234 CR X+95.069 Y+25.132 R-22.500 DR- R F M235 CR X+79.742 Y+28.447 R75.000 DR- R F M236 L X+77.555 Y+21.796 R0 F M237 LBL 0238 END PGM 1000MM

Documents

Solidcam Mill Tutorial