Upload
duongdien
View
214
Download
0
Embed Size (px)
Citation preview
Page 1 of 1 (Rev. 06/2018)
SolarPROJ_Q_v3.3In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2018, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Solar Project Questionnaire
Selux engineers will need the following info to begin configuring your solar powered luminaire. Please fill out this form and email to Selux Technical Support to begin the specification process at [email protected]. Please include any additional notes or unique site requirements in your email.
Which Selux solar luminaire are you considering for your project? Please fill in the catalog configuration below as best as you can. Please refer to luminaire spec sheet for catalog specification codes. Don’t worry about the battery, solar panel or panel mounting angle, Selux Engineers will determine the best configuration based on the information you’ve provided.
Project Name: Project city/state:
Project application: Parking lot Pedestrian Path Pedestrian/Roadway Other:
Why are you considering solar powered lighting? (check all that apply)
Location is off-grid
Other reasons:
LEED points To conserve energy Green project
Luminaire Order Code Optics Mounting Light Engine CCT Finish Quantity
Avanza 450 LED Solar AV4LS
Olivio Medio LED Solar OLMLS
Discera LED Solar DSCLS
What is your desired pole? Please fill in the catalog configuration below as best as you can. Please refer to luminaire spec sheet for catalog specification codes.
Pole Diameter Height Finish Options Quantity
Straight Steel 5” or 6” 12’ 14’ 16’ 18’ other:
Tapered Steel 7” or 8” 12’ 14’ 16’ 18’ other:
Sun Obstruction? Yes No If yes, estimate amount of hours solar panel will be in shade? hours
Motion Detector? Motion detectors can extend battery life and may reduce overall solar luminaire assembly cost by lowering the need for higher capacity batteries as well as reducing maintenance and operational costs. When motion is detected, the luminaire will increase intensity to 100% output. When no motion is detected, luminaire will dim to a predetermined light level.
Yes No
Operational Profile: This will determine the pre-programmed behavior of the solar luminaire assembly. Select from the table below either Custom Profile - Option 1, OR Standard Profile - Options 2 - 10.
Dimmed to 30%
Custom
Operation Profile Sunset Midnight Sunrise
1
2
3
4
5
6
7
8
9
10
TIME PM
All night 100%
All night 30%
4 hrs 0hrs
6 hrs 0hrs
8 hrs 0hrs
2 hrs 2hrs
4 hrs 2hrs
6 hrs 2hrs
8 hrs 2hrs
TIME AM
On 100%
On 100%
On 100%
On 100%
Dimmed to 30%
Dimmed to 30%
Dimmed to 30% all night (This profile intended for use with a motion sensor)
On 100%
On 100%
On 100%
On 100%
On 100%
On 100%
On 100%
Dimmed to 30%
Dimmed to 30%
Dimmed to 30%
Dimmed to 30%
On 100% all night long (This profile not for use with a motion sensor)
Specify: Hours PM Dim Level % Hours AM
Motion Detector allowance? hours Estimated amount of time the luminaire will operate at 100% output based on pedestrian/vehicle activity