Soil testingand sampling solutions.

TEC 12 Series. Sampling drill / Perforadora TECSoil Testing in environmental and geotechnical applications.Investigación de suelos para aplicaciones ambientales y geotécnicas.

Main features /características generales: Low weight / Peso reducido: 1000 Kgs.Compact dimensions / Dimensiones compactas: L2100mm, W780mm, H1450mm.Fit standard door openings / Paso por puertas de ancho standard.Strong design / diseño robusto.Rotary head / cabezal de rotación.Improved shift between rotary head, drop hammer and extraction device / Cambio SPT-cabeza-extractor mejorado.

New designed TEC series to perform sam-ple and rotary/auger drill with same rig

Omega profile mast to lighten and strengthen ensuring total weight of 1000 kgs. Can be transport-ed on stan-dard vans. Rubber tracks, hydraulic jacks for proper le-velling at site. Unsurpassable and simple device to shift between SPT-rotary head and mast rod extractor. 15 ton Casing extractor in-cluded.

Nuevo diseño de la conocida serie TEC, para realizar ensayos de penetracion dinamica, muestra inalterada y sondeos a rotacion y elice continua. Nueva columna de perforación con perfil omega para aligerar y reforzar ofreciendo un peso total de 1000 kgs. Puede transpor-tarse en furgonetas estandar. Insuperable sistema de cambio entre SPT-cabezal de rotacion y extractor de mastil. Ex-tractor de revestimiento de 15 ton incluido.

Applications. / Aplicaciones:

Standard penetration test /Pruebas de penetración dinámica.Soil sampling with percusive core barrels /Muestreo inalteradoRotary drill.Auger Drill.

TECHNICAL DETAILS / DATOS TÉCNICOSEngine / MotorBrand and model / Marca modelo Yanmar L100AE.No. Cylinders- stroke /Nº cil-desplazamiento 1 cil. 389cm3. 2 cil.Power / Potencia 13HP @ 3600 rpm.Rpm. 3.500

Hydraulic system / Sistema hidráulicoPumps / Bombas 3 gear pumps 4cm3 eachWorking pressure / presión de trabajo 150 barOIl capacity / Capacidad dep. hid. 65 litros

Crawlers / OrugasWidth / Ancho 760 mm.Shoe wide / Ancho de teja 180mm.Nº rollers / nº rodillos 6Travel speed / Vel. Traslación 3,4 Km/h.Total weight / Peso total 1000 Kg.Maximun slope / Pendiente sup 20º (45%)

Rotary head / Cabezal de rotaciónType / tipo. TECR1Max. torq and rpm / Potencia y rpm max. 40 daN@200 rpm.

SPT-hammer system / Martillo SPTFeed length. / carrera de caida 760mm, 500mm optionalHammer weight / Peso 63,5 Kgs. 65 y 50 kgs. optionall

Drill mast direct push type / Mástil de tipo tiro directoStroke / Carrera 1500mm.Pull up / pull down 4000 kgs / 2000 kgs

Hydraulic clamps / Mordazas hidraulicasType / Tipo SimpleOpening / Apertura 25mm-125mm

TEC 15 Sampling drill / Perforadora TEC 15Soil Testing in environmental and geotechnical applications.Investigación de suelos para aplicaciones ambientales y geotécnicas.

Main features / caracteríscas generales: Low weight / Peso reducido: 1000 Kgs.Compact dimensions / Dimensiones compactas: L2100mm, W780mm, H1450mm.Fit standard door openings / Paso por puertas de ancho standard.Strong design / diseño robusto.Rotary head / cabezal de rotación.Improved shi2 between rotary head, drop hammer and extraction device /Cambio SPT-cabeza-extractor mejorado.

New designed TEC series to perform sample and rotary/auger drill with same rig

Omega profile mast to lighten and strengthen ensuring total weight of 1000 kgs. Can be transported onstandard vans. Rubber tracks, hydraulic jacks for proper levelling at site. Unsurpassable and simple device toshi2 between SPT-rotary head and mast rod extractor. 15 ton Casing extractor included.

Nuevo diseño de la conocida serie TEC, para realizar ensayos de penetración dinámica, muestra inalterada ysondeos a rotación y élice continua. Nueva columna de perforación con perfil omega para aligerar y reforzarofreciendo un peso total de 1000 kgs. Puede transportarse en furgonetas estandar. Insuperable sistema decambio entre SPT-cabezal de rotación y extractor de mastil. Extractor de revestimiento de 15 ton incluido.

Applications. / Aplicaciones:

Standard penetration test / Pruebas de penetración dinámica.Soil sampling with percusive core barrels / Muestreo inalterado.Rotary drill.Auger Drill.

New FLEX-shi’® system that allows to choose the work method by just pull a pin - drop hammer, rotary head or extraction device. Allows to perform drive sampling, standard penetration test and rotary drilling with the same rig.

Nuevo sistema FLEX-shi’® que permite seleccionar entre modo SPT-cabezal de rotación o extractor de torre con el simple cambio de un bulÓn. Permite realizar ensayos de muestra inalterada, penetración dinámica, y rotación con la misma perforadora.

TECHNICAL DETAILS / DATOS TÉCNICOS

Engine / MotorBrand and model / Marca modelo Kubota D902No. Cylinders- stroke / Nº cil-desplazamiento 3 cil.Power / Potencia 22HP @ 3600 rpmRpm 3600

Hydraulic system / Sistema hidráulicoPumps / Bombas Two gear pumpsWorking pressure / presión de trabajo 180 bar.OIl capacity / Capacidad dep. hid. 80 lts.

Crawlers / Orugas. Radio remote controlled / via radioWidth / Ancho 1050 mm.Shoe wide. / Ancho de teja. 180mmNº rollers / nº rodillos 6Travel speed / Vel. Traslación 3,4 Km/h.Total weight / Peso total 1400 Kg.Maximun slope / Pendiente sup 20º (45%)

Rotary head / Cabezal de rotaciónType / tipo TECR2Max. torq and rpm / Potencia y rpm max. 140 daN@250 rpm

SPT-hammer system / Martillo SPTAutomatic / automáticoFeed length / carrera de caida 760mm, 500mm opcionalHammer weight / Peso 63,5 Kgs. 65 y 50 kgs. opcional

Drill mast direct push type / Mástil de tipo tiro directoStroke / Carrera 1500mmPull up / pull down 4000 kgs / 2000 kgs

Hydraulic clamps / Mordazas hidraulicasType / Tipo SimpleOpening / Apertura 25mm-125mm

Penetrometer SPT TEC 10Soil testing in environmental and geotechnical applications

APPLICATIONSStandard penetration test. (SPT)Dynamic super heavy probes (DPSH)Dynamic heavy probes (DPH)Soil sampling with percussive core barrels.Installation of gas /water monitoring wells.

MAIN CHARACTERISTICSLow weight: 850 Kgs.Compact dimensions: L2030mm x W770mm xH1360mm.Fit standard doors openings.Easy to use drive head, that makes very easyconnecting tooling which increase productivity.Strong design of automatic hammer.Coring head to drill concrete.

DRILLING TOOLSSPTRods 2.1x39.4 in 50mmX1000mm square threadImpactor head TEC10 TEC10SPT Split SPT 2.1in Split SPT 50mmShoe Closed, openDPSHRods 1.3x39.4 in 32mmx1000mm thread 6H x 1”Impactor head TEC10 TEC10Lost cone DPSH 2 in cone 90º 50mm cone 90ºBorros 1x1x3.68 in 40x40x145 cone 90ºWINDOWLESS SAMPLERSSampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mmCasing 4.4, 5 in 113, 128mmRods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2”Impactor rods 1.3x39.4 in 35x1000mm Thread R32TECHNICAL DATAEngineBrand and model Yanmar L100AE.No.Cylinders/stroke 1 cylinder 389cm3.Power 13HP 3600 rpm 7,4 kW / 3600 rpm.Rpm 3500Hydraulic systemNº pumps y type 3x4 g/min 3 gear pumps-4cm3Working pressure 2176 psi 150 barOil capacity 14.3 g 65 liters.TracksShoe wide 180mm.No. rollers 6Travel speed 1,5 m/h 2,1-3,4 Km/h.Total weigth 1874 lb 870 Kg.HAMMER SYSTEM– AUTOMATICFeed length 19.7/29.9 in 760mm, 500mm optionalHammer weigth 110.2/140 lb 63,5 Kgs. 65 y 50 kgs. optionalSampling depth 33 feet 10 meters / 33 feet

ROTARY HEAD ROTEC02Two speed small rotary head for water/mud and auger drilling. Stroke 1200mm.Available torque and speed in DaNm /rpm with hyd. motor shift:

Hyd. motor rpm rpm DaNm50 387 258 1080 375 187 19100 300 150 24125 237 118 30160 187 93 40

C/ Granito, 16-17 • 28412 Cerceda - Madrid (Spain) Tel. (+34) 91 842 00 55 Fax (+34) 91 842 04 18 • sales@tecopsa.com

Penetrometer SPT TEC 10Soil testing in environmental and geotechnical applications

APPLICATIONSStandard penetration test. (SPT)Dynamic super heavy probes (DPSH)Dynamic heavy probes (DPH)Soil sampling with percussive core barrels.Installation of gas /water monitoring wells.

MAIN CHARACTERISTICSLow weight: 850 Kgs.Compact dimensions: L2030mm x W770mm xH1360mm.Fit standard doors openings.Easy to use drive head, that makes very easyconnecting tooling which increase productivity.Strong design of automatic hammer.Coring head to drill concrete.

DRILLING TOOLSSPTRods 2.1x39.4 in 50mmX1000mm square threadImpactor head TEC10 TEC10SPT Split SPT 2.1in Split SPT 50mmShoe Closed, openDPSHRods 1.3x39.4 in 32mmx1000mm thread 6H x 1”Impactor head TEC10 TEC10Lost cone DPSH 2 in cone 90º 50mm cone 90ºBorros 1x1x3.68 in 40x40x145 cone 90ºWINDOWLESS SAMPLERSSampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mmCAsing 4.4, 5 in 113, 128mmRods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2”Impactor rods 1.3x39.4 in 35x1000mm Thread R32TECHNICAL DATAEngineBrand and model Yanmar L100AE.No.Cylinders/stroke 1 cilindro 389cm3.Power 13HP 3600 rpm 7,4 kW / 3600 rpm.Rpm 3500Hydarulic systemNº pumps y tipe 3x4 g/min 3 gear pumps-4cm3Working pressure 2176 psi 150 barOil capacity 14.3 g 65 litros.TracksShoe wide 180mm.No. rollers 6Travel speed 1,5 m/h 2,1-3,4 Km/h.Total weigth 1874 lb 870 Kg.HAMMER SYSTEM– AUTOMATICFeed length 19.7/29.9 in 760mm, 500mm opcionalHammer weigth 110.2/140 lb 63,5 Kgs. 65 y 50 kgs. opcionalSampling depth 33 feet 10 meters / 33 feet

ROTARY HEAD ROTEC02Two speed small rotary head for water/mud and auger drilling. Stroke 1200mm.Available torque and speed in DaNm /rpm with hyd. motor shift:

Hyd. motor rpm rpm DaNm50 258 387 980 375 187 15100 300 150 20125 237 118 28160 187 93 38

Penetrometer SPT TEC3. Soil testing in environmental and geotechnical applications.

Applications. Standard penetration test. (SPT) Dynamic super heavy probes (DPSH) Dynamic heavy probes (DPH) Soil sampling with percussive core barrels. Installation of gas /water monitoring wells.

Main characteristics. Hand portable, one man operation. Low weight: 190 + 98 Kgs. Compact dimensions: L 750 x W 770 x H 1400mm Easy to use, the telescopic mast needs no spend time in positioning at work. The automatic hammer elevation is made by the hydraulic cylinder.

Penetrometer SPT TEC3. Soil testing in environmental and geotechnical applications.

Applications. Standard penetration test. (SPT) Dynamic super heavy probes (DPSH) Dynamic heavy probes (DPH) Soil sampling with percussive core barrels. Installation of gas /water monitoring wells.

Main characteristics. Hand portable, one man operation. Low weight: 190 + 98 Kgs. Compact dimensions: L 750 x W 770 x H 1400mm Easy to use, the telescopic mast needs no spend time in positioning at work. The automatic hammer elevation is made by the hydraulic cylinder.

Penetrometer SPT TEC 03Soil testing in environmental and geotechnical applications.

APPLICATIONSStandard penetration test. (SPT)Dynamic super heavy probes (DPSH)Dynamic heavy probes (DPH)Soil sampling with percussive core barrels.Installation of gas /water monitoring wells.

MAIN CHARACTERISTICSHand portable, one man operation.Low weight: 190 + 98 Kgs.Compact dimensions: L 750 x W770 x H 1400mmEasy to use, the telescopic mastneeds no spend time in positioningat work. The automatic hammerelevation is made by the hydrauliccylinder.

Technical data. Power pack Brand and model Honda/Kohler fuel engine

No.Cylinders/stroke 1 cylinder .

Power 6.37 HP 4.9 kW

Rpm 3600 3600

Hydarulic system. Nº pumps y tipe 1x4 g/min 1 gear pump-4cm3

Working pressure. 2176 psi 150 bar

Oil capacity 4.5 g 20 liters.

Extraction device Type Double cylinder

Capacity 10 daN 10 ton.

Weight

Penetrometer 408 lbs 190 kgs.

Power pack 107 lbs 98 kgs.

Hammer system– automatic Feed length 19.7/29.9 in 760mm, 500mm opcional

Hammer weigth 110.2/140 lb 63,5 Kgs. 65 y 50 kgs. opcional

Sampling depth 66 feet 20 meters / 33 feet

Drilling tools

SPT Rods. 2.1x39.4 in 50mmX1000mm square thread

Impactor head TEC10 TEC10

SPT Split SPT 2.1in Split SPT 50mm

Shoe Closed, open

DPSH. Rods 1.3x39.4 in 32mmx1000mm thread 6H x 1"

Impactor head TEC10 TEC10

Lost cone DPSH 2 in cone 90º 50mm cone 90º

Borros 1x1x3.68 in 40x40x145 cone 90º

Windowless samplers Sampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mm

Casing 4.4, 5 in 113, 128mm

Rods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2"

Impactor rods 1.3x39.4 in 35x1000mm Thread R32

TECHNICAL DATAPower packBrand and model Honda/Kohler fuel engineNo.Cylinders/stroke 1 cylinderPower 6.37 HP 4.9 kWRpm 3600 3600

Hydraulic system.RNº pumps y tipe 1x4 g/min 1 gear pump-4cm3Working pressure. 2176 psi 150 barOil capacity 4.5 g 20 liters.

Extraction deviceType Double cylinderCapacity 10 daN 10 ton.

WeightPenetrometer 408 lbs 190 kgs.Power pack 107 lbs 98 kgs.

Hammer system– automaticFeed length 19.7/29.9 in 760mm, 500mm opcionalHammer weigth 1 10.2/140 lb 63,5 Kgs. 65 y 50 kgs. opcionalSampling depth 33 feet 10 meters / 33 feetDRILLING TOOLSSPTRods. 2.1x39.4 in 50mmX1000mm square threadImpactor head TEC10 TEC10SPT Split SPT 2.1in Split SPT 50mmShoe Closed, open

DPSHRods 1.3x39.4 in 32mmx1000mm thread 6H x 1”Impactor head TEC10 TEC10Lost cone DPSH 2 in cone 90º 50mm cone 90ºBorros 1x1x3.68 in 40x40x145 cone 90ºWindowless samplersSampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mmCasing 4.4, 5 in 113, 128mmRods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2”Impactor rods 1.3x39.4 in 35x1000mm Thread R32

Technical data. Power pack Brand and model Honda/Kohler fuel engine

No.Cylinders/stroke 1 cylinder .

Power 6.37 HP 4.9 kW

Rpm 3600 3600

Hydarulic system. Nº pumps y tipe 1x4 g/min 1 gear pump-4cm3

Working pressure. 2176 psi 150 bar

Oil capacity 4.5 g 20 liters.

Extraction device Type Double cylinder

Capacity 10 daN 10 ton.

Weight

Penetrometer 408 lbs 190 kgs.

Power pack 107 lbs 98 kgs.

Hammer system– automatic Feed length 19.7/29.9 in 760mm, 500mm opcional

Hammer weigth 110.2/140 lb 63,5 Kgs. 65 y 50 kgs. opcional

Sampling depth 66 feet 20 meters / 33 feet

Drilling tools

SPT Rods. 2.1x39.4 in 50mmX1000mm square thread

Impactor head TEC10 TEC10

SPT Split SPT 2.1in Split SPT 50mm

Shoe Closed, open

DPSH. Rods 1.3x39.4 in 32mmx1000mm thread 6H x 1"

Impactor head TEC10 TEC10

Lost cone DPSH 2 in cone 90º 50mm cone 90º

Borros 1x1x3.68 in 40x40x145 cone 90º

Windowless samplers Sampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mm

Casing 4.4, 5 in 113, 128mm

Rods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2"

Impactor rods 1.3x39.4 in 35x1000mm Thread R32

Technical data. Power pack Brand and model Honda/Kohler fuel engine

No.Cylinders/stroke 1 cylinder .

Power 6.37 HP 4.9 kW

Rpm 3600 3600

Hydarulic system. Nº pumps y tipe 1x4 g/min 1 gear pump-4cm3

Working pressure. 2176 psi 150 bar

Oil capacity 4.5 g 20 liters.

Extraction device Type Double cylinder

Capacity 10 daN 10 ton.

Weight

Penetrometer 408 lbs 190 kgs.

Power pack 107 lbs 98 kgs.

Hammer system– automatic Feed length 19.7/29.9 in 760mm, 500mm opcional

Hammer weigth 110.2/140 lb 63,5 Kgs. 65 y 50 kgs. opcional

Sampling depth 66 feet 20 meters / 33 feet

Drilling tools

SPT Rods. 2.1x39.4 in 50mmX1000mm square thread

Impactor head TEC10 TEC10

SPT Split SPT 2.1in Split SPT 50mm

Shoe Closed, open

DPSH. Rods 1.3x39.4 in 32mmx1000mm thread 6H x 1"

Impactor head TEC10 TEC10

Lost cone DPSH 2 in cone 90º 50mm cone 90º

Borros 1x1x3.68 in 40x40x145 cone 90º

Windowless samplers Sampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mm

Casing 4.4, 5 in 113, 128mm

Rods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2"

Impactor rods 1.3x39.4 in 35x1000mm Thread R32

Technical data. Power pack Brand and model Honda/Kohler fuel engine

No.Cylinders/stroke 1 cylinder .

Power 6.37 HP 4.9 kW

Rpm 3600 3600

Hydarulic system. Nº pumps y tipe 1x4 g/min 1 gear pump-4cm3

Working pressure. 2176 psi 150 bar

Oil capacity 4.5 g 20 liters.

Extraction device Type Double cylinder

Capacity 10 daN 10 ton.

Weight

Penetrometer 408 lbs 190 kgs.

Power pack 107 lbs 98 kgs.

Hammer system– automatic Feed length 19.7/29.9 in 760mm, 500mm opcional

Hammer weigth 110.2/140 lb 63,5 Kgs. 65 y 50 kgs. opcional

Sampling depth 66 feet 20 meters / 33 feet

Drilling tools

SPT Rods. 2.1x39.4 in 50mmX1000mm square thread

Impactor head TEC10 TEC10

SPT Split SPT 2.1in Split SPT 50mm

Shoe Closed, open

DPSH. Rods 1.3x39.4 in 32mmx1000mm thread 6H x 1"

Impactor head TEC10 TEC10

Lost cone DPSH 2 in cone 90º 50mm cone 90º

Borros 1x1x3.68 in 40x40x145 cone 90º

Windowless samplers Sampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mm

Casing 4.4, 5 in 113, 128mm

Rods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2"

Impactor rods 1.3x39.4 in 35x1000mm Thread R32

Technical data. Power pack Brand and model Honda/Kohler fuel engine

No.Cylinders/stroke 1 cylinder .

Power 6.37 HP 4.9 kW

Rpm 3600 3600

Hydarulic system. Nº pumps y tipe 1x4 g/min 1 gear pump-4cm3

Working pressure. 2176 psi 150 bar

Oil capacity 4.5 g 20 liters.

Extraction device Type Double cylinder

Capacity 10 daN 10 ton.

Weight

Penetrometer 408 lbs 190 kgs.

Power pack 107 lbs 98 kgs.

Hammer system– automatic Feed length 19.7/29.9 in 760mm, 500mm opcional

Hammer weigth 110.2/140 lb 63,5 Kgs. 65 y 50 kgs. opcional

Sampling depth 66 feet 20 meters / 33 feet

Drilling tools

SPT Rods. 2.1x39.4 in 50mmX1000mm square thread

Impactor head TEC10 TEC10

SPT Split SPT 2.1in Split SPT 50mm

Shoe Closed, open

DPSH. Rods 1.3x39.4 in 32mmx1000mm thread 6H x 1"

Impactor head TEC10 TEC10

Lost cone DPSH 2 in cone 90º 50mm cone 90º

Borros 1x1x3.68 in 40x40x145 cone 90º

Windowless samplers Sampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mm

Casing 4.4, 5 in 113, 128mm

Rods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2"

Impactor rods 1.3x39.4 in 35x1000mm Thread R32

Technical data. Power pack Brand and model Honda/Kohler fuel engine

No.Cylinders/stroke 1 cylinder .

Power 6.37 HP 4.9 kW

Rpm 3600 3600

Hydarulic system. Nº pumps y tipe 1x4 g/min 1 gear pump-4cm3

Working pressure. 2176 psi 150 bar

Oil capacity 4.5 g 20 liters.

Extraction device Type Double cylinder

Capacity 10 daN 10 ton.

Weight

Penetrometer 408 lbs 190 kgs.

Power pack 107 lbs 98 kgs.

Hammer system– automatic Feed length 19.7/29.9 in 760mm, 500mm opcional

Hammer weigth 110.2/140 lb 63,5 Kgs. 65 y 50 kgs. opcional

Sampling depth 66 feet 20 meters / 33 feet

Drilling tools

SPT Rods. 2.1x39.4 in 50mmX1000mm square thread

Impactor head TEC10 TEC10

SPT Split SPT 2.1in Split SPT 50mm

Shoe Closed, open

DPSH. Rods 1.3x39.4 in 32mmx1000mm thread 6H x 1"

Impactor head TEC10 TEC10

Lost cone DPSH 2 in cone 90º 50mm cone 90º

Borros 1x1x3.68 in 40x40x145 cone 90º

Windowless samplers Sampler 2.6,3,3.4,4,4.6 66,76,86,101,116 mm long=1000mm

Casing 4.4, 5 in 113, 128mm

Rods 1-1/2” x 39.4 54mmX1000mm Thread Whitworth 1-1/2"

Impactor rods 1.3x39.4 in 35x1000mm Thread R32

TecPenSPT, DPSH, DPH, DPL Data Logger

SPT DATALOGGERTecPen is an automatic data recorder with built- in GPS for SPT tests, DPM, DPH and DPSH. It can be installed on any type of automatic SPT hammer. Installation only takes a few minutes. It records the complete parameters of the test and store them in its internal memory to finally transferred to the PC.Software included.

ABS CASE IP66ABS case IP66.LCD screen Lipo battery for 8 hours.Ultrasonic sensor depth measurement. Main battery charger and car lighter charger. Measures console: 90x160x50 mm.

SOFTWARE The included software provides a graph and final values with GPS location of the test. Customer reference, penetrometer and person-nel performing the test can also be recorded in the final report.

TecPen– SPT,DPSH, DPH, DPL DATA LOGGER

SPT Datalogger. - GS f S , DM, DH DSH. f S . f . f fi f C. S .

S. fi GS f . C f, f fi .

ABS 66. LCD L f . U . M . M : 90x160x50 .

Penetrometer SPT TEC 01The SPT TEC01 is an automatic penetrometer that can be install on any drill rig.

PenetrometerSPT TEC 130

AUTOMATIC HAMMERImpact rate 1-30 bpmFeed length 760mm, 500mm optionalHammer weight 63,5 Kgs. 65 and 50 kgs. optionalTotal weight 115 Kgs. +/- 10%

HYDRAULIC REQUIREMENTSFor SPT hammer 0-8 l/min at 150 bar.

AUTOMATIC HAMMERImpact rate 1-30 bpmFeed length 760mm, 500mm optionalHammer weight 63,5 Kgs. 65 and 50 kgs. optionalTotal weight 115 Kgs. +/- 10%

HYDRAULIC REQUIREMENTSFor SPT hammer 0-8 l/min at 150 bar.For hyd. Cilinder 0-30 l/min at 80 bar.

TECOP, S.A. C/ Granito, 16-17 • 28412 Cerceda - Madrid (Spain)Tel. (+34)91 842 00 55 Fax (+34) 91 842 04 18 • sales@tecopsa.com

Tecopsa recommend to use ProRock drilling tools.