Upload
trankhanh
View
217
Download
0
Embed Size (px)
Citation preview
2
DOVER ARTIFICIAL LIFT
Elevating the Potential of Artificial Lift Production.
Dover Artificial Lift, part of Dover Energy, offers a comprehensive line of artificial lift equipment, accessories and services strategically designed to drive the operational excellence of each of our clients. We provide industry-leading systems and components engineered to enhance the profitability of gas lift, plunger lift, rod lift, progressing cavity pump applications and surface production, as well as state-of-the-art software and products in the well automation, analysis, and optimization space.
As an organization dedicated to the needs of our clients, we place a consultative service and support approach at the forefront of our operations. Driven by a team of veteran artificial lift experts, our mission is to deeply understand the complex production challenges faced by well operators on a daily basis, and provide them the exact set of tools needed to meet them as efficiently and effectively as possible.
Strengthened by the vast global footprint and tradition of excellence of our parent company, the Dover Corporation, we are able to ensure that the products we provide – and more importantly – the people who make up our organization, are the best in the artificial lift industry.
3
Smart, Simple Savings
THETA SOFTWARE SOLUTIONS
Theta’s software offerings are designed to provide oilfield management professionals a streamlined method to ensure their wells run as efficiently and effectively as possible, from the moment their pumps are installed, to the day the well is depleted.
With pump design and predictive diagnostic tools, as well as data collection capabilities, Theta’s family of software products was developed to optimize well production, minimize well maintenance costs and drastically enhance the return on investment associated with well monitoring labor.
Each of Theta’s products features an easy-to-understand, graphically-driven interface to ensure a simple user experience and reduce the training and specialized knowledge needed to interact and leverage the cost saving features of the software.
SMARTTheta’s software utilizes the industry’s most advanced pump design and diagnostic algorithms to provide direct suggestions that lead to enhanced per well profit. Leverage the power of state-of-the-art predictive artificial intelligence.
SIMPLEDesigned with the user in mind, Theta’s software features the market’s most simple-to-use and understandable well automation, design, diagnostic and optimization tools. A visually-driven, SCADA experience minimizes the amount of technical knowledge needed to interact with Theta’s products.
SAVINGSFrom the potential 1000% increase in the productivity associated with well monitoring labor, to a 30% reduction in well maintenance costs, Theta’s software can rapidly provide a positive return on investment, and ultimately, ongoing increased profit margins.
4
THETA SOFTWARE SUITE
Theta offers the oilfield industry a variety of tools designed to provide operations professionals the most streamlined, easy-to-understand well design, diagnostic and monitoring software available today. Our unique 7-step well optimization process is proven to leverage our software suite’s advanced well analysis and design technology to help any well achieve maximum production and efficiency.
1 Calculate the system’s current counterbalance
XBAL
2XDIAG
In-Depth System Analysis
5XTOOLS
Use RODSTAR and XTOOLS to correct problems and optimize system performance
6XBAL
Balance the pump
7UPDATE
Update data
3 Perform a “History Match” on measured and predicted dynamometer cardsXDIAG +
RODSTAR
4RODSTAR
Analyze system performance under worst case conditions
Theta’s 7-Step Optimization Process
5
XSPOC
XSPOC is a comprehensive well monitoring and optimization tool. Developed with the user in mind, it provides well management personnel a powerful, yet streamlined experience. Through the use of advanced artificial intelligence, XSPOC offers direct recommendations, in plain text, that are designed to enhance operational profit, as well as address current and potential well issues and inefficiencies.
Capable for use as standalone software, yet greatly enhanced through integration with Theta’s other products, XSPOC is designed to provide tangible well enhancements with all modern pumping hardware and equipment that show directly on a company’s bottom line.
• A simple user interface provides a SCADA-like, graphically-driven experience – limited technical knowledge and training is required
• Receive direct design recommendations to optimize your wells in order to achieve primary production goals
• Integrates with, and enhanced by, Theta’s full suite of software
• Microsoft SQL-compatible database format allows for easy communication with other software products
• Provides substantial benefits to both small and large operations, fully scalable
• Advanced well grouping features make it easy to manage wells by exception
6
STEP 1 - CALCULATE THE SYSTEM’S CURRENT COUNTERBALANCE
Pictured Above: XBAL is used to identify a pump’s current counterbalance moment.
XBAL
• Reduce the time and labor required to properly balance a pump
• Eliminate the risk of bad data associated with field measurement
• Enhance well safety by limiting the need to move counterweights or chain the polished rod
XBAL SOFTWARE
XBAL is the only pump balancing software that uses Expert System Logic to provide simple-to-understand data and recommendations to help you properly balance your pumping units. With a streamlined UI and extensive help feature, XBAL leverages a robust database of counterbalance data to help optimize a variety of different pumping units.
Incorrectly assuming a system is balanced leads to poor software input and output
Poor torque analysis and cyclic loading factor data makes efficient design difficult
Unknown variable costs make it difficult to calculate the profitability of a system
Challenge Our Solution
XBAL calculates the current counter balance of the pumping unit which is used to calculate the existing gearbox torque
Accurately accounting for system variables eliminates wasteful spending
Intelligent cost analysis algorithms help define the total cost of production
7
STEP 2 - USE XSPOC OR XDIAG FOR IN-DEPTH SYSTEM ANALYSIS
• Receive well diagnosis through the use of a simple interface, in plain text format
• Predict production, along with potential issues that may interfere with it
• Compatible with a majority of the industry’s most commonly used hardware
XDIAG SOFTWARE
XDIAG provides expert well diagnostic analysis through state-of-the-art system and pattern recognition combined with accurate wave equation modeling. The software can also determine a number of system variables such as fluid level and pump friction, actively combating user error by matching inputs with predictive algorithms, and leverage IPR data to estimate possible production.
XDIAG
Pictured Above: The counterbalance determined in Step I is entered into XDIAG for accurate, in-depth system analysis.
Various pump issues prevent accurate surface card data and poor optimization
Most software solutions produce difficult to understand analysis and output
User error can lead to severe output inaccuracies with most software solutions
XDIAG uses measured surface card data to diagnose problems with the current operating condition
XDIAG and Theta’s suite provides simple-to-follow reports, in plain text and graphs
Theta’s products match user input to advanced algorithms to actively prevent user error
Pictured Above: An example of XDIAG’s detailed, yet straightforward output
Challenge Our Solution
8
STEP 3 - PERFORM A “HISTORY MATCH”
XDIAG + RODSTAR / XROD
Pictured Above: A “dyno match” graph showing a pump’s measured and predicted card.
Pictured Above: The resulting history match output, complete with sophisticated predictions and direct, plain English suggestions regarding well optimization.
Challenge Our Solution
Failing to address a pump’s past prevents truly accurate predictive production data
Without intelligent software, using past well data to prevent potential future issues is difficult
Lack of information regarding key well variables can lead to inefficient production
XDIAG + RODSTAR/XROD work together to analyze a pump’s current condition to accurately predict its future output once corrections are made
Predictive analysis provides a list of direct optimization suggestions to avoid future pump problems
RODSTAR/XROD and XDIAG combine to solve for unknown well variables, such as friction
• XROD’s artificial intelligence leverages the industry’s most detailed and comprehensive design
• Achieve maximum mechanical, operational and production efficiency
• Provides fully optimized system designs ten to fifty times faster than any other competitive software
XROD SOFTWARE
XROD utilizes Theta’s own advanced artificial intelligence technology to provide fully optimized rod pump system designs in a simple-to-understand plain text format. By entering just pump depth and target production, the software provides full system configurations to help you achieve your production goals as efficiently as possible.
9
STEP 4 - ANALYZE PUMP LOAD AND WELL FLUID LEVELS
RODSTAR / XROD
Pictured: XROD’s output, which allows users to easily understand and identify ways to optimize their wells based predicted loads. The data shown represents a steady state condition with a full pump and the fluid level at the pump.
Challenge Our Solution
If a pump system is not optimized for both current and “pumped off” conditions, the future success of the well can be seriously affected
Non-optimized pumping systems can require expensive future work overs
Failing to address the worst case scenario when analyzing your well can cause premature failure as the fluid level drops
Accurate fluid and load level data helps avoid the pump off condition or inefficient system builds
Direct design recommendations eliminate the prospect of costly hardware repairs
Properly addressing well and pump characteristics make max production viable
• Simply generate optimized schematics, well cost analysis and IPR reports, and rod string order summaries for your designed systems
• Avoid the time-consuming “trial and error” design approach imposed by most forms of pump design software
• A detailed and context aware in-software help section enables even those new to the pump design process to successfully interact with RODSTAR/XROD
RODSTAR SOFTWARE
RODSTAR offers both vertical and horizontal well operators a simple-to-use tool to design optimized pump configurations, and simulate future pump performance. Make corrections to your existing well’s design or create a design for a new well that will enable efficient production.
10
STEP 5 - USE XROD & XTOOLS TO OPTIMIZE A PUMP’S PERIPHERAL COMPONENTS
XTOOLS
Pictured Above: The XTOOLS Polished Rod Picker interface. Here, a series of inputs suggests the best possible rod for your system.
Pictured Above: The XTOOLS homescreen, developed for easy navigation between various software utilities.
Challenge Our Solution
If peripheral pump component performance isn’t analyzed, optimized production can’t be achieved
XTOOLS simplifies analyzing the often-overlooked aspects of production and well design
A lack of in-depth analysis leads to a decreased understanding of pump-ing nuances
Understand information such as sheaves required for ideal SPM, or optimal gas anchor design
Without direct calculation, poten-tial lost production due to slippage cannot be calculated
A slippage calculator helps accurately determine how much production will be lost from pump slippage
• Optimize the often-overlooked aspects of a pumping system for maximum efficiency
• Accurately estimate the potential production lost due to slippage
• Ensure the peripheral components of your pump are ideal for your system
XTOOLS SOFTWARE
XTOOLS works in unison with Theta’s other offerings to provide detailed suggestions regarding important, yet peripheral, pump system components. The software includes: an SPM calculator, motor sheave sizing tool, gas anchor designer, tubing anchor calculator, polished rod picker, and pump slippage calculator.
11
STEP 6 - BALANCE THE PUMP. STEP 7 - UPDATE DATABASES
XBAL
UPDATE DATA
Pictured Above: XBAL suggesting direct weight movements that will allow for a properly balanced pump.
Pictured Above: XBAL indicating your system is properly balanced after suggested weight movements are made.
Challenge Our Solution
A poorly balanced pump drastically increases power and maintenance costs
XBAL utilizes Expert System Logic to eliminate the guesswork associated with unit balancing
Constant changes to a pump’s counter weights are labor intensive and dangerous
Enhance operational efficiency and safety through streamlined and explicit recommendations
Poorly balanced pumps place added stress on a pump’s motor
Reduce wear and tear on a pump’s motor, reducing long-term maintenance
The key to developing a pumping system that can remain properly optimized is maintaining an accurate and current pump perfomance database. Finishing the optimization process by using XBAL to log new counterbalance data, the process can be streamlined in the event that well conditions require it.
Combined with XSPOC to monitor your wells, this provides the industry’s most simplified and streamlined optimization process.
12
CASE STUDY
While Theta is commited to offering the industy’s most advanced well design and diagnostic technology, our mission is providing our customers with tools that enhance long-term profit and allow them to capture a quick and significant positive return on their investment. Whether you are looking to drastically reduce initial pump system costs during new installations, or optimize your pre-existing wells for maximum profitability, Theta’s products are designed with your bottom line in mind.
New Well Cost Savings
Theta Difference
Failing to design an optimized pumping system for a new well is often one of the most costly mistakes that a well operator can make. With drastic differences in the cost of pumping units, overestimating the size of the unit needed for optimal production can lead to severe overspending on the upfront costs associated with a well, as well as unnecassary ongoing electricity costs. Below are two cases in which Theta’s software was able to find a cheaper, but equally effective, pumping system for a new well installation:
In these cases, Theta was able to find signficantly cheaper pumping units and rod string alternatives that would allow for the same production. While actual figures may vary on current market rates for this equipment, savings in the $10,000 range per well would be expected. For large operations, the use of Theta’s software could lead to savings of over half a million dollars, before production even begins.
Case 1
Original XROD Design
Unit Size C-228-213-86 C-160-169-54
Rod String
7/8” C API 1535 ft 7/8” Norris C30 1850 ft
3/4” C API 2675 ft 3/4” Norris C30 2375 ft
1.25” C API (SB) 200 ft 1.5” Norris C (SB) 175 ft
Case 2
Original XROD Design
Unit Size C-640-305-120 C-456-298-100
Rod String
1” D API 1613 ft 3/4” Norris 97 5838 ft
7/8” D API 1675 ft 1.625” Norris C (SB) 350 ft
3/4” D API 2900 ft
13
POST-INSTALLATION WELL OPTIMIZATION
Beyond the significant cost savings associated with new well installations, Theta also provides well operators guidance on how to make their pre-existing wells more efficient. These suggestions are reported in easy-to-understand plain English, and leverage advanced predictive algorithms to provide accurate estimations of how a well’s performace will be affected. Below is a case that illustrates how signficant these savings can be:
The boxes above represent the before and after values for many key
production metrics. The left represents the hypothetical pumping
system’s current data, and the right displays expected values once the
software suite’s suggestions have been made.
The torque analysis and electricity consumption data between
the current and proposed pumping system shows a significant
improvement in both categories. The differences reflect significant
power savings, and a drastic reduction in pump motor maintenance
and potential downtimes.
The rod string analysis between the existing and optimized pump system
shows a notable reduction in the stress placed on the rods during
operation. Due to the fact that the forces applied to these rods causes
exponentially more severe product degradation as stress loads increase,
this greatly enhances rod life.
Notable Improvements:
• A near 2% increase in daily production
• An effective 16% increase in system efficency
• An effective 22% increase in unit structure loading
• Structure loading well below capacity (86%) while utilizing a smaller
pumping unit
Notable Improvements:
• An 37% reduction in pump electricity costs
• An effective 14.5% reduction in gearbox loading
• A $0.04 reduction in power cost per barrel
• Substantial immeasurable maintenance and equipment
replacement costs
Notable Improvements:
• A drastically reduced stress load percentage on all of the in-system
rods that are subject to reduction
• Longer rod life and a lessened chance of failure reduce potential
pump maintence, equipment costs, and downtimes