Sockets pdf

www.C

anTorq

ue.com

IMPACT SOCKETS & SLUGGING WRENCHES

2 IMPACT SOCKETS & SLUGGING WRENCHES www.cantorque.com

Impact sockets, accessoRIes anD socket sets

Standard, Deep and Thinwall Sockets Up to 3.1/2 square drive Impact Sockets through to 235MM (9.1/8) across the ats # 5 spline drive to across the ats Wide variety of Accessories

FREECORNER PROFILEThe Freecorner pro le is provided on the square drives as well as on the hexagon end of Impact Sockets1/2 square drive and above.

THE BENEFITS OF THE FREECORNER PROFILE INCLUDE ARE: Reduced risk of fastener rounding. Increased chances of turning worn fasteners. Elimination of high stress concentration points increasing the impact resistance and the torque transmitting capability.

CANTORQUE IMPACT SOCKETSCanTorque Impact Sockets of 1/2 square drive and above feature freecorner for ats above 17 mm (5/8).

All Impact Sockets are made from high strength alloy steel. All Impact Sockets are heat treated for the best combination of strength and impact resistance. All Impact Sockets have an optimum wall thickness for strength and access on fasteners having restrictions. The depth of the Hex openings is designed to accomodate the full standard fastener head. All Impact Sockets have chamfered openings for ease in engagement with the drive tool and the fastener. Concentric openings and large clearance holes to meet industrial speci cations. All Impact Sockets have a Ring-N-Pin arrangement for securing them to the drive. Sockets are plated and black oxidized coated for increased protection from rusting.

saFetY notIce

Sockets in this catalog are designed for impact use. Always use safety goggles when using impact equipment.

Conventional Profi leCorner point contact high stress areas

Highlights show contact points on the corner of the fastener

Freecorner Profi leDistributed surface loads relieves possibe stress area

Highlights show contact points away from the corner of the fastener

www.cantorque.com impact sockets & slugging wrenches 3

InDeX

cantoRQUe waRRantY

The CanTorque warranty will replace free to the original purchaser any

qualifying socket found to be defective in either material or workmanship,

indicated by premature wear or breakage. Determination of free replace-

ment will be done by your CanTorque distributor. Impact Sockets, by na-

ture of their application are subject to extreme stresses, therefore special

application sockets such as thinwall, hex driver, accessories and slugging

wrenches are speci cally excluded from the replacement warranty.

4

6

9

13

19

22

25

26

29

30

32

33

34

35

37

38


Impact sockets 3/8


Impact sockets thInwall 3/8

Impact accessoRIes


Impact sockets 1/2


Impact sockets sets 1/2

Impact sockets


Impact sockets 1/2

Impact accessoRIes


Impact sockets 3/4


Impact sockets thInwall 3/4


Impact sockets accessoRIes 3/4


Impact sockets 1


Impact sockets thInwall 1


Impact accessoRIes 1


Impact sockets 1 1/2

www.cantorque.com IMPACT SOCKETS & SLUGGING WRENCHES 21

IMPACT ACCESSORIES 1 1/2

CanTorque Impact Sockets ideal for use with Hydraulic Torque Wrenches.


IMPACT SOCKETS 2 1/2


IMPACT ACCESSORIES 2 1/2

CanTorque Impact Sockets used along with a CanTorque Torque Multiplier.



IMPACT ACCESSORIES


IMPACT SOCKETS


IMPACT SOCKETS

IMPACT ACCESSORIES


SOCKET ACCESSORIES


CASTELLATED SOCKETS


STRAIGHT SLUGGING WRENCHES


OFFSET SLUGGING WRENCHES


OPEN JAW SLUGGING WRENCHES


BOX BI-HEX SLUGGING WRENCHES


STRUCTURAL WRENCHES

(OFFSET RING TYPE)

STRUCTURAL WRENCHES

(OFFSET OPEN JAW TYPE)


STRUCTURAL WRENCHES

STRUCTURAL WRENCHES

(FLAT RING TYPE)

(FLAT OPEN JAW TYPE)


INSERT SOCKETS


TURBINE TOOLS


__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

NOTES

CanTorque Inc.

14635-119 Avenue, Edmonton, Alberta, Canada T5L 2N9Phone: +1-780-436-2000 Fax: +1-780-732-0905 Toll Free: 1-877-436-4364

Email: [email protected]

Twitter: @cantorqueFacebook: www.facebook.com/CanTorqueInc

www.cantorque.com

DISTRIBUTED BY:

Documents

Sockets pdf