Socar New Management Office Project. Baku, AZERBAIJAN 70.000 m2 ExtruBit® D ECB Geomembrane

ExtruBit®M ECB (Ethylene Copolymer Bitumen ) ,

Central Glass Fleece reinforced , High Ageing Resistant , Waterproofing Geomembrane for Foundations ,Ponds and Chemical Storage Areas.

Product Description :

Extrubit , Waterproofing geomembrane based on ECB ( Ethylen Copolymer Bitumen ) for single ply application.

Suitable with DIN 16729 norms.

Product Designation :

Cyanide,Bitumen and Chemicals storage areas. Renovation of existing bituminous roofs. Flat roof sealing for renovation or new buildings. Terrace roof application. Pond ,pool and dam applications. Underground garage structures. Water storage tanks.

Benefits :

Environmentally friendly (PVC, plasticizer and chlorine free ; no toxic gas during application ) Suitable for LEED ciriteria.

Application possibility in all weather conditions High tensile , tear and puncture resistance. Double welded seam application with pressure

air test ( 2 atm ) . Resistant to sparks.

06 1349-CPD-025

XPS , EPS and Bitumen compatible , no need for separation layers.

Highly resistant to ageing , does not lose any properties by time.

Resistant to UV rays , highly resistant to various chemicals , acid/alkali solutions , oils , microorganisms , mold and mildew growth ,root effects and sea water

Product Data According to EN 13967 :

EXTRUBIT®M 2,0 mm TEST METHOD UNIT RESULTS

5.2.1 VISIBLE DEFECTS DIN EN 1850-2 - FREE OF VISIBLE DEFECTS

5.2.2 LENGTH DIN EN 1848 - 2 m 15,00 / 20,00 -0% / +5%

5.2.2 WIDTH DIN EN 1848 - 2 m 0,205/0,33/0,52/1,05/1,5/2,00 - 0,5% + 1,0%

5.2.2 MASS PER UNIT AREA DIN EN 1849 - 2 Kg/m2 2,00 -5% +10%

5.2.2 EFFECTIVE THICKNESS ( eff ) DIN EN 1849 - 2 mm 2,00 - 5% + 10%

5.2.3 WATERTIGHTNESS ( Metod B )

DIN EN 1928 (600 kPa/24 h) - TIGHT

5.2.7.2 JOINT SHEAR RESISTANCE DIN EN 12317 - 2 N/50 mm

LONGITUDINAL ≥ 400 TRANSVERSE ≥ 400

5.2.8 WATER VAPOUR PROPERTIES ( µ ) DIN EN 1931 - 90.000

5.2.9 TENSILE STRENGTH DIN EN 12311 - 2 N/mm2 LONGITUDINAL ≥ 7,0 TRANSVERSE ≥ 5,0

5.2.9 ELOGNATION AT BREAK DIN EN 12311 - 2 % LONGITUDINAL ≥ 400 TRANSVERSE ≥ 400

5.2.10 RESISTANCE TO IMPACT ( Metod A+B ) DIN EN 12691 mm ≥700

5.2.11 RESISTANCE TO STATIC LOAD ( Metod B ) DIN EN - 12730 Kg ≥ 20

5.2.12 TEAR RESISTANCE DIN EN 12310 - 2 N LONGITUDINAL ≥ 250 TRANSVERSE ≥ 160

5.2.13 RESISTANCE TO ROOT PENETRATION DIN EN 13948 - TESTED ACCORDING TO FLL

5.8.2

RESISTANCE TO ALKALI DIN EN 1847 DIN EN 1928 - FULFILLED

5.2.15 FOLDABILITY AT LOW TEMPRATURE DIN EN 495 - 5 ºC ≤ - 30

5.2.14 DIMENSIONAL STABILITY DIN EN 1107-2 % ≤ 1,5

5.2.16 UV EXPOSURE DIN EN 1297 - FULFILLED

5.2.18 EXPOSURE TO CONTACT WITH BITUMEN DIN EN 1548 - FULFILLED

ExtruBIT®D ECB (Ethylene Copolymer Bitumen ) ,

High Ageing Resistant ,Signal Foiled Waterproofing Geomembrane

Product Description :

Extrubit D , Waterproofing geomembrane based on ECB ( Ethylen Copolymer Bitumen ) for single ply application.

Suitable with DIN 16729 norms.

Product Designation :

Foundation applications, Wall applications Terraca roof application Pond ,pool and dam applications Underground garage structures Water storage tanks

Benefits :

Environmentally friendly (PVC, plasticizer and chlorine free ; no toxic gas during application ) Suitable for LEED ciriteria.

Application possibility in all weather conditions

High tensile , tear and puncture resistance. Double welded seam application with

pressure test. Signal foil lamination ,visual test possibility.

06 1349-CPD-025

XPS , EPS and bitumen compatible , no need for separation layers.

Highly resistant to ageing , does not lose any properties by time.

Resistant to sea water. Resistant to sparks. Resistant to UV rays , highly resistant to

various chemicals , acid/alkali solutions , oils , microorganisms , mold and mildew growth ,root effects

Product Data According to EN 13956 :

EXTRUBIT D 2,0 mm TEST METHOD UNIT RESULTS

5.2.1 VISIBLE DEFECTS EN 1850-2 - FREE OF VISIBLE DEFECTS

5.2.2 LENGTH EN 1848 - 2 m 15,00 / 20,00 -0% / +5%

5.2.2 WIDTH EN 1848 - 2 m 0,205/0,33/0,52/1,05/1,5/2,00 - 0,5% + 1,0%

5.2.2 MASS PER UNIT AREA EN 1849 - 2 Kg/m2 2,00 -5% +10%

5.2.2 EFFECTIVE THICKNESS ( eff ) EN 1849 - 2 mm 2,00 - 5% + 10%

5.2.3 WATERTIGHTNESS ( Metod B )

EN 1928 (600 kPa/24 h) - TIGHT

5.2.7.2 JOINT SHEAR RESISTANCE EN 12317 - 2 N/50 mm

LONGITUDINAL ≥ 500 TRANSVERSE ≥ 500

5.2.8 WATER VAPOUR PROPERTIES ( µ ) EN 1931 - 90.000

5.2.9 TENSILE STRENGTH EN 12311 - 2 N/mm2 LONGITUDINAL ≥ 10,0 TRANSVERSE ≥ 8,5

5.2.9 ELOGNATION AT BREAK EN 12311 - 2 % LONGITUDINAL ≥ 500 TRANSVERSE ≥ 600

5.2.10 RESISTANCE TO IMPACT ( Metod A+B ) EN 12691 mm ≥ 900

5.2.11 RESISTANCE TO STATIC LOAD ( Metod B ) EN - 12730 Kg ≥ 20

5.2.12 TEAR RESISTANCE EN 12310 - 2 N LONGITUDINAL ≥ 300 TRANSVERSE ≥ 200

5.2.13 RESISTANCE TO ROOT PENETRATION EN 13948 - TESTED ACCORDING TO FLL

5.8.2

RESISTANCE TO ALKALI DIN EN 1847 DIN EN 1928 - FULFILLED

5.2.15 FOLDABILITY AT LOW TEMPRATURE EN 495 - 5 ºC ≤ - 30

5.2.14 DIMENSIONAL STABILITY EN 1107-2 % ≤ 1,5

5.2.16 UV EXPOSURE EN 1297 - FULFILLED

5.2.18 EXPOSURE TO CONTACT WITH BITUMEN EN 1548 - FULFILLED