Snuggie Bunny

8/12/2019 Snuggie Bunny

1/11

The Embroidery Design Placewww.embroiderydesignplace.com

SNUGGIE BunnyEverything is done in the embroidery hoop!

This is a large design, please use the Brother Large Hoop 160 x 260. It contains 4 files:

Snuggie Bunny Front, Snuggie Bunny Back, Snuggie Bunny Front Lacy Apron, and

Snuggie Bunny Back Lacy Apron.

All designs tested on the ULT 2002D, at setting 3.6 and speed 600.

The following thread numbers are from Madeira, except where noted.

I used needle size 75 universal and medium weight tear-a-way stabilizer.

Snuggie Bunny Lacy Apron - picture above.


2/11

Snuggie Bunny picture above

Directions:

Part 1: Start with Snuggie Bunny Front or Snuggie Bunny Front Lacy

Apron design file!

Snuggie Bunny Front Lacy Apron

total of 5 colors usedsize: 5.52 x 8.69

stitch count: 7790

Madeira Thread:

*1. 1120 Pink ears and nose2. 1001 White part of eye

3. 1147 Red mouth

4. 2083 Purple (Marathon Thread) lacy part of apron and ties

5. 1005 Black outline and eye6. 1001 White eye speck


3/11

OR

Snuggie Bunny Front

total of 6 colors used

size: 5.52 x 8.69stitch count: 10608

Madeira Thread:1. 1120 Pink ears and nose

2. 1001 White part of eye

3. 1147 Red mouth4. 2083 Purple (Marathon Thread) apron

5. Yellow lacy part of apron

6. 1005 Black outline and eye7. 1001 White eye speck

I used the Snuggie Bunny Front Lacy as the example for below with white felt. The only

difference is that the Snuggie Bunny Front has one more color.

1. Hoop tear-a-way stabilizer with white felt. (I don't know why my scanner doesn't scan

the felt as white sorry.)

2. Embroidery design as colors shown from above for*Snuggie Bunny Front Lacy Apronor Snuggie Bunny Front.


4/11

3. Take the Snuggie Bunny Front Lacy Apron out of the hoop and cut just outside the

black line. You can see that in several places I cut along the black line by accident thiswon't hurt.

4. For a stiffer Snuggie Bunny DO NOTtear the stabilizer off the back of the bunny. Set

this piece a side.

OR


5/11

5. If you want a softer Snuggie Bunny tear and cut the stabilizer away. I did this by

pinching in the middle of the felt and separating the felt from the stabilizer. Next, I cut asmall snippet in the stabilizer, so I could get my scissors in the hole to cut around. Some

places I could tear the stabilizer very gently. See picture below. You can see that I left

the stabilizer on the face and paws. Then set this piece a side.


6/11

Part 2: Snuggie Bunny Back or Snuggie Bunny Back Lacy Apron

design file!

Snuggie Bunny Back Lacy Apron

total of 6 colors used

stitch count: 12353size: 5.52 x 8.69"

*1. 1120 Pink ears and nose and 1120 Pink embroidery thread in the bobbin.2. 1001 White part of the eye and regular embroidery thread in the bobbin since I

used White.

3. 1147 Red mouth and 1147 Red embroidery thread in the bobbin.4. 2083 Purple (Marathon Thread) lacy part of apron and ties and Purple embroidery

thread in the bobbin.

5. 1005 Black eye and outline and 1005 Black embroidery thread in the bobbin.6. 1001 White eye speck and regular embroidery thread in the bobbin since I used

White.7. 1001 White (Shown as Blue) outline and stuffing stop and regular embroidery

thread in the bobbin since I used White.

8. 1001 White (Shown as Pink) stitches the bunny closed and regular embroidery

thread in the bobbin since I used White.

OR

Snuggie Bunny Backtotal of 7 colors used

stitch count: 15315

size: 5.52 x 8.69"

1. 1120 Pink ears and noseand 1120 Pink embroidery thread in the bobbin.2. White part of the eyeand regular embroidery thread in the bobbin since I used

White.

3. 1147 Red mouth and 1147 Red embroidery thread in the bobbin.4. 2083 Purple (Marathon Thread) apronand Purple embroidery thread in the

bobbin.

5. Yellow lacy part of apron and Yellow embroidery thread in the bobbin.6. Black eye and outlineand Black embroidery thread in the bobbin.7. White eye speckand regular embroidery thread in the bobbin since I used

White.8. Black (Shown asBlue) outline and stuffing stopand Black embroidery thread in

the bobbin.

9. Black (Shown asPink) stitches the bunny closedand Black embroidery thread in

the bobbin.


7/11

1. This a very important step:Hoop the tear-a-way stabilizer on top of the white felt. If

your felt has a right and wrong side, place the wrong side facing up to you, then put thestabilizer on top of it. See picture below.

2. Embroider out all color stops 1 6 for Snuggie Bunny Back Lacy Apronand stop.

Remember to match the bobbin thread to the thread being used. DO NOTembroider outcolor stops 7 and 8. For Snuggie Bunny Back embroidery out all color stops 1 7 (DONOTembroidery out color stops 8 and 9). You will notice that color stop 6 for the Snuggie

Bunny Back Lacy Apron and color stop 7 for the Snuggie Bunny Back are an outlineplacement stop. See picture below.


8/11

3. Take your hoop off the machine and place the Snuggie Bunny Front Lacy Apron rightside upinside the blackout lines from Snuggie Bunny Back Lacy Apron. You will needto secure this down. I used tape.

4. Place hoop back on machine and sew color stop 7 only for Snuggie Bunny Back Lacy

Apron. If your using Snuggie Bunny Back, it would be color stop 8 only. I choose whiteembroidery and bobbin thread, since I used white felt match this color to your felt

color. And don't forget to match your bobbin thread to your embroidery thread.


9/11

5. Gently remove all the tape.

6. DO NOTremove your bunny yet, but take your hoop off the machine and gently fillthe bunny with polyester Fiberfil on both side openings. Use a pencil end to help push

filling in. Be careful not to stuff too full. Use about one open hand full of Fiberfil. After

your done stuffing, tape these closed.


10/11

7. Put hoop back on machine and do color # stop 8 for Snuggie Bunny Back Lacy Apron.

If your using Snuggie Bunny Back, it would be color stop 9. Use the same embroideryand bobbin thread from step #4 above.


11/11

Documents

Snuggie Bunny