ParchmentPatterns.com 2011
Snowflake Card Instructions
You will need:
1 Sheet of white A4 parchment paper
White ink (Tinta ink used) Mapping Pen
White pencil
Bold perforating tool (or bold two needle tool, if available)
Semi Square perforating tool
Micro, small and medium embossing tools
Adhesive gems in various sizes (optional)
Coloured card or white/coloured parchment (for liner)
Trace Secure the parchment to the pattern and trace the whole
design plus the chosen greeting using the white ink and the
mapping pen, except for the fold line which should be traced in
white pencil.
Emboss
Using the micro embossing tool, emboss the whole design
including the greeting.
Using the medium and small embossing tools, emboss the main body
of the snowflake see picture for guidance.
Perforate/Cut
Using the bold perforating tool or bold two needle tool, if
available, perforate around all of the sections marked P on the
pattern. Cut the perforations to remove the excess parchment.
Using the Semi Square perforating tool perforate around the
outside edge of the card. Cut the perforations as
follows:
Finishing
Fold the card along the fold line.
Fold the coloured card or white/coloured parchment in half and
insert in to the parchment card, glue in place and trim to size as
desired.
Stick adhesive gems (if using) on to the card as shown in the
picture or as desired.
