Upload
marais-groupe
View
217
Download
1
Tags:
Embed Size (px)
DESCRIPTION
SMC 202 r machine
Citation preview
Wheel Trencher for the mechanical laying of networks
Process Tangentially driven trenching wheel designed by Marais
Specific features The Marais SM 200 trenching wheel allows to cut at a 1.40 m depth
Constant and reduced width of the trench, Constant building cost per meter
Non-stop shielding of the cut trench : the laying unit Preservation of the geometric data of the cut trench Compliance with the bending radius of the cables and the ducts
Quality of the trench bottom : the shoe Smooth clean and compact trench bottom without any salient angle
Network laying qualityConstant depth Constant altimetry and planimetry of the laid network
Assets Cutting of different grounds
Frame slope correction making itpossible a vertical cutting on an inclined ground
Reduction in building costs
Output From 300 to 2,000 lm/day depending on the grounds, sections of trenches and nature of the network to be laid
Simultaneous performance of trenches and mechnicallaying for the deployment of networks (telecoms,eletricity, drainage, water, sanitation, gas, etc…) in ruralenvironments and rocky grounds
MARA I SGROU P E
SMC 202 R
Features of the trenching tool Type : Marais tangentially driven trenching wheel
Working widths : 280, 300, 350, 450 mm
Minimum depth : 0.50 m
Maximum depth : 1.40 m
Lateral offset of the tool outside the machine : 200 mm on the left and right side
Cutting tool mounted on pivot
Slope correction of the tool
Sizes and weight of the unit Length in working position : approx 16 m (with reel and laying unit)
Length in transport position : 11 m
Width : 2.50 m
Height : 3.20 m
Weight : 26 tons
Motor drive system 470 HP (345 kW) diesel thermal motor
510 HP (375 kW) diesel thermal motor
Technical diagram
Accessories Reel carrier in front of the machine(capacity : 5.2 tons)
Removable guardrails on the machine
Laying units : fiber optic, electricity, drainage, HDPE, root-proof screen, warning grid, cable tightener
Coating materials of networks : sand sprayer, concrete hopper with vibrating unit, excavated material screen, backfiller
Combs and guide rollersSM
C_2
02R
_EN
G _
03/1
2 -
Spec
ifica
tions
as
show
n ar
e no
t bin
ding
to th
e m
anuf
actu
rer
and
may
be
chan
ged
with
out p
rior
not
ice.
The
equ
ipm
ent o
ffer
ed in
this
leafl
et c
an in
clud
e op
tiona
l fitt
ings
and
dev
ices
.
www.samarais.com
MARA I SGROU P E ZA Les Portes de l’Anjou
1, rue Pierre et Marie CURIE BP 20 - 49430 DURTAL (France)
Tél. : 33 (0)2 41 96 16 90 / Fax : 33 (0)2 41 96 16 99e-mail : [email protected]