SmartVu Mini Dome Install and Config Manual

8/18/2019 SmartVu Mini Dome Install and Config Manual

1/39

SmartVu IP Camera

Mini Dome


2/39

Version 1.0

Table of Contents

Important Safeguards............................................................................................................................3

Installing the Unit ................................................................................................................................6

Mini Vandal Dome................................................................................................................................6

Connections..........................................................................................................................................6Configuring the Unit ............................................................................................................................7

Using the Unit with Secure Closed IPV ..................................................................................7

!ero"conf configuration .............................................................................................................#

$ccessing the Configuration Pages ............................................................................................#

S%stem Settings ....................................................................................................................................&

$ttri'utes ......................................................................................................................................()

Software ........................................................................................................................................(*

Status .............................................................................................................................................(3

Unit Status ................................................................................................................................(3

$'out ............................................................................................................................................(+

,eneral Information ......................................................................................................................(-SMP ,raphs ...............................................................................................................................(6

amed De/ices..............................................................................................................................(7

Memor% and CPU 0andwidth........................................................................................................(#

Camconfig Details ........................................................................................................................(&

Capa'ilities ...................................................................................................................................*)

UI Information ..............................................................................................................................*(

1anguage .......................................................................................................................................**

ime and Date ...............................................................................................................................*3

Maintain ........................................................................................................................................*-

User $ccounts ...............................................................................................................................*6

Camera Setup.................................................................................................................................*7$20 uning..................................................................................................................................*#

etwor Settings ...........................................................................................................................*&

etwor ........................................................................................................................................3)

1i/e rans .....................................................................................................................................3*

Mini Vandal Dome 4uic installation guide......................................................................................3+

Specification ......................................................................................................................................37

otes...................................................................................................................................................3#


3/39

Important Safeguards

Read Instructions

All the safety and operating instructions should be read before the unit is operated.

Power SourcesThis unit should be operated only from the type of power source indicated on the manufacturer’slabel.

ServicingDo not attempt to service this unit yourself as opening or removing covers may expose you todangerous voltage or other haards.

!efer all servicing to "ualified service personnel.

Ventilation#nsure unit is properly ventilated to protect from overheating. All the safety and operating instructions should be read before the unit is operated.

To prevent fire or shoc$ haard% do not expose this e"uipment to rain or moisture. The lightningflash with arrowhead symbol within an e"uilateral triangle is intended to alert the user of thise"uipment that there are dangerous voltages within the enclosure which may be of sufficientmagnitude to constitute a ris$ of electric shoc$.

This is a class A product. &n a domestic environment this product may cause radio interference inwhich case the user may be re"uired to ta$e ade"uate measures.

This section contains the regulatory declarations for the EU for the Camera.This product is mar$ed with the '# symbol and indicates compliance with all applicable Directives. A (Declaration of 'onformity) is held at Dedicated *icros +td% 1,00 Daresbury -ar$% Daresbury%'heshire A/ / http233www.dedicatedmicros.com


4/39

ereby% Dedicated *icros +TD% declares that this 4nit 'amera is in compliance with the essentialre"uirements and other relevant provisions of Directive 56363#'.*ar$ing by the symbol '# indicates compliance of this Dedicated *icros product to the#lectromagnetic 'ompatibility Directive 7538893##'% and the +ow Voltage Directive :83,83##' ofthe #uropean 4nion. uch mar$ing is indicative that this system meets the following technicalstandards; #< 9,000=8=8 +imitations of voltage changes% fluctuations and flic$er in public low=voltage supplysystems for e"uipment with rated current up to 19A.; #< 91000=8=, +imits for harmonic current emissions for e"uipment with rated current up to 19A.; #< 660,/2,010.>urther details about these applicable standards can be obtained from Dedicated *icros +td.% 1,00Daresbury -ar$% Daresbury% 'heshire A/ /1.0100,

RF Interference warningThis is a class A product. In a domestic environment this product may cause radio frequencyinterference, in which case the user may be required to tae adequate measures.1.01008

Regulatory otes and FCC and D!C Information?4A and 'anadian *odels @nly

arning2 This e"uipment has been tested and found to comply with the limits for a 'lass A digitaldevice% pursuant to part 16 of the >'' rules. These limits are designed to provide reasonable

protection against harmful interference when the e"uipment is operated in a commercialenvironment. This e"uipment generates% uses% and can radiate radio fre"uency energy and% if notinstalled and used in accordance with the instruction manual% may cause harmful interference toradio communications. @peration of this e"uipment in a residential area is li$ely to cause harmfulinterference in which case the user will be re"uired to correct the interference at their ownexpense.

&f necessary% the user should consult the dealer or an experienced radio3television technician for corrective action. The user may find the following boo$let prepared by the >ederal'ommunications 'ommission helpful2 (ow to &dentify and !esolve !adio=TV &nterference-roblems).

This boo$let is available from the 4 Bovernment -rinting @ffice% ashington% D',0/0,%toc$


5/39

C" Mar#&f this product is mar$ed with the '# symbol it indicates compliance with all applicabledirectives.%Directive 7538893##'.%A CDeclaration of 'onformity’ is held at Dedicated *icros+td.%1,00 Daresbury -ar$% Daresbury% 'heshire% A/ /% 4.


6/39

Installing t$e %nit

&efore you start

Chec the contents of the bo!

The dome camera can be mounted in two ways" ceiling mount for installation into a tile ceiling# surfacemount for installation directly to a hard surface or mounting structure.

Parts Supplied Mini Vandal Dome; 8 x 80 mm ?1.,) screws; 8 x 80 mm ?1.,) anchors

*ounting template Allen $ey!E/6 coupler F


7/39

Configuring t$e %nit

%sing t$e %nit wit$ Secure Closed IPTV

1 'onnect the camera to a 'losed &-


8/39

/ero0conf configuration

If a permanent I) address is not assigned to the unit, it will attempt to contact the &*C) server every time itstarts up, and periodically thereafter. The unit support +eroconfiguration networing -sometimes nown ason/our0, this enables automatic discovery of computers, devices, and services on I) networs. 1eroconfiguration uses industry standard I) protocols to allow devices to automatically discover each otherwithout the need to enter I) addresses or configure &'( servers. y loading a suitable free addon to yourweb browser such as on/our for 2indows for Internet E!plorer or on/our3o!y for 3ire3o! +eroconfiguration devices such as this unit can easily be discovered and accessed.

1ccessing t$e Configuration Pages

The unit is configured using the onboard configuration pages. To access these"1. +aunch a web browser% preferably on a -' on the same subnet as the unit.,. Type the &- address ?or D


9/39

System SettingsThe menus under the (ystem (ettings heading allow the unit%s core settings to be viewed, changed and thesystem software upgraded.The Attributes option displays details about the unit including the I) address, unit serial number, 4ACaddress and software version.The (tatus page displays information about the unit%s operating condition, shows how long the unit has beenoperating and the reason for the last reset. It also shows the camera status.The 5anguage page allows the system language to be set. The language can also be changed for thecurrent session only.The Time and &ate page allows the unit time and date settings to be ad/usted, including setting thetime+one.The 3eatures page allows control of the different features that are available within the software includingcontrol of the display resolution.The 4aintain page allows the current configuration to be saved, and for previously saved settings to beloaded.


10/39

AttributesThis menu shows the general information about the unit including the version of software installed, the unit%sserial number and the allocated &*C) I) address.

The system will display a warning if user accounts have not been set up. These can be eliminated by settingup accounts in 6&isplay7User Accounts%.

-roduct Descriptor2 Details the product model.erial


11/39

#arliest !ecording2 Displays the date3time of the earliest recording held on the unit.ystem


12/39

SoftwareThis page details the installed software and may be needed if calling Technical (upport.

ystem ?!ed +in$s bac$ to the ystem ettings pageDiagnostics ?Flue @pens the (tatus7&iagnostics page.!efresh ?-urple !efreshes the current page


13/39

Status

%nit Status

This menu details information regarding the status of the unit, including the total time the unit has beenoperating and the time since its last reset.

Time since last reset Details the time since the unit was last reset.Total running time Details the total time the unit has been operational.!eset code The last reset code used is displayed.!estart reason The reason for the last restart is displayed i.e. 'ontrolled 4ser !eset.!efresh ?-urple !efreshes the current page


14/39

About

This page provides quic lins to the pages required to fault find.

ystem &nformation @pens the (ystem (ettings7(ystem page.oftware !evisions @pens the (ystem (ettings7(oftware page.Beneral &nformation @pens the 8eneral Information page ?refer to 68eneral Information% .

*emory 3 '-4 Fandwidth @pens the *emory 3 '-4 Fandwidth &etails page ?refer to 6 *emory 3 '-4Fandwidth % .'amconfig Details @pens the Camconfig &etails page ?refer to 6Camconfig &etails% .'apabilities @pens the Capabilities &etails page ?refer to 6Capabilities &etails% .4& &nformation @pens the UI Information page ?refer to 6UI Information% .*D


15/39

General InformationThis page gives an overview of the units current settings including I) address, connections to the camera,the locations that data is being read from and written to, and which recording profile is active.

About ?Flue @pens the About page!efresh ?-urple !efreshes the current page


16/39


17/39

Named Devices

!efresh ?-urple !efreshes the current page


18/39

Memory and CPU Bandwidt

This page allow selection of the memory and '-4 graphs to see the current load on the system. This can beused to see how changing settings are loading the camera.



19/39

Camconfi! Details

This page displays the capabilities of the camera in terms of resolution and supported compression formats.This camera does not support audio, alarms, relay or lens dewarping so all these parameters return 9.



20/39

Ca"abilities

This information page shows the capability settings for the camera. These parameters determine how thecamera performs and what options are available on the configuration pages.

This page shows the capabilities that are enabled in this product



21/39

UI Information

The UI page shows the settings stored in the camera which configure the user interface.-rofile !ecord TablesThis page shows the different settings available in the record configurations. The current default settings areindicated by crosses.



22/39

#an!ua!eThis menu allows the system language to be set. Changing the (ystem 5anguage will effect all menu pages.If required, the language can also be changed for the current session only.

ystem +anguage elect to change the system language setting.Note: A server reboot will be required to implement system language changes. The unit can be rebooted via(ystem (ettings74aintain7$eset, or by pressing 6$ed% while on this page.ession +anguage elect to change the language settings for the current session only.'hoose elect to immediately activate session language changes.


23/39

!eset ?!ed !esets the unit!efresh ?-urple !efreshes the current page

$ime and Date

ystem Time The current system time and date is displayed.'urrent Time Lone Displays the currently selected time one settings.Time Lone elect the relevant timeone offset from the accompanying drop down menu.Date >ormat As default% the date is entered dd3mm3yy. &t can also be displayed as mm3dd3yy or yy3mm3dd.


24/39

!eset ?!ed !esets the unitTime >ormat As default% the time displayed is in 1, hour format. This can be changed to ,/ hour if re"uired.


25/39

*aintain

The page allows for the unit to be reset or changed bac$ to the default settings as supplied from the factory.


26/39

User Accounts

The unit can protect configuration procedures by limiting access via usernames and passwords. y default,no usernames and passwords are configured for any account type.


27/39

Camera Setu"

'amera Title This title can be edited to allocate a name to the unit. This is displayed when the unit isaccessed via or viewscontaining high speed images% the setting can be increased ?to a max of 13100M-A+N or 131,0M


28/39

A%B $unin!

AF Tuning can be used to adHust the colour of the image to suit re"uirements. The camera will

automatically balance the colour. &f #nable custom white balance is selected then a manual level for eachcan be created. 'urrent levels are shown on screen.


29/39

Networ& Settin!s

The 'etwor (ettings menus allow configuration of the unit%s networ functionality. :ey networ settings canbe established such as 6fi!ing% the unit%s I) address and ma!imum transmission rate. Email, remotereporting on alarm and 3T) download can also be configured, refer to the individual menus for furtherdetails.

The 'etwor page allows configuration of the unit%s networ connections such as the name assigned to theunit and its I) address.

The 5ive Trans-mission0 page enables ;)E8 and 4)E8 profiles to be created for transmitting images via a*igh, 4edium or 5ow quality networ connections to any viewing software or to another unit using this oneas an I) source.

The 4ulticast page allows recordings from the unit%s camera input to be forwarded to a port address#enabling multiple viewers to view live data using a suitable media player without the need to directly connectto the unit.

The Email page allows configuration of the Email feature. The unit can automatically transmit an email to an(4T) (erver following an event i.e. on receipt of an alarm or a camera failure notice.The $emote $eporting page allows a $emote


30/39

Networ&This menu allows networ settings to be configured if required. The unit is &'( compliant, and can bereferenced on the networ using the configured server name -or serial number0 if a &'( server is available

erver


31/39

&- Address An &- address can be manually allocated to the unit.

ub


32/39

#ive $ransThe unit transmits live images using ;)E8 or 4)E8 formats. The 'et


33/39

ieOrate >or E-#B% the figure entered will be the sie of the E-#B transmitted ?in bytes.

E-#B file sies can be configured in the range of 6=/6b.>or *-#B/ the figure will be the bit rate allocated. A higher rate will provide better "uality picture display.*-#B bit rates in the range of /6=8000bits3second.

-- This shows the number of pictures transmitted per second. >or E-#B% the actual images transmitted willdepend on the bandwidth of the lin$% increasing the pictures sent per millisecond may introduce time lag ifbandwidth is not sufficient i.e. this forces the same quality image through the available connection . @n*-#B transmission% increasing the pictures sent will also reduce the "uality of the images i.e. this forcesmore images but maintains the defined bit rate.

*-#B Type P Quality elect whether transmitted *-#B/ images are sent as !A data or in B@V ?Broupof Video format. !A mode transmits a single & frame and then a se"uence of - frames ?until a change intransmission is detected. B@V mode sends & and - frames in a standard format i.e. & to - frame ratio as set

by the record parameters.

'F! maintains a 'onstant Fit !ate% selectable from a range of , = 81. elect a suitable level of details fromthe drop down list. 'onstant Fit rate allows the storage re"uirements to be calculated with more accuracy.& >rame !atio elect the ration of & >rames recorded between each - >rame.

Note: An *-#B &=frame is considerably larger than a -=frame. Therefore the higher the &=- ratio% the higherthe dis$ space re"uired to store recorded images.!efresh ?-urple !efreshes the current page.


34/39

Mini Vandal Dome 2uic# installation guide


35/39


36/39

6

9


37/39

SpecificationThe following product specifications are produced with the best efforts for accuracy% for product improvements these can be subHect to changeIalways chec$ re"uirements with your sales manager before ordering.

345 Mini Dome Model 6575 Mini Dome Model

*odels all with &! illumination vandal domes

138R ensor Aptina '*@ 13,.7R ensor ony #xmor

+ens2 8.9 mm >ixed &! 'oated

*ax. !es 3 *ax frame rate 1,70S:,0 3 80fps 15,0S1070 3 80fps

>ield of view ? 3 V 3 D :: deg 3 6/ deg 3 100., deg

Aspect ratio 1925

+ight ensitivity 0.1 +ux >1., ? 'olour % ?0 lux with &! &! +#Ds

hutter Auto3user 136 U 1360%0000 I 60390 software selectable

Audio * Optional feature to be

added @ptional microphone 1 #thernet ?103100 Fase=T !E/6% Audio 1 x !'Ainput 3 1 x !'A output2 1V line level%

-ower 1,V D' 3 -o# 'lass 8 on #thernet


38/39

otes


39/39

For more information about Dedicated Micros8 products or

for details of your local Dedicated Micros office, please visit9

www+dedicatedmicros+com:contact

Documents

SmartVu Mini Dome Install and Config Manual