smartmarine3D_brochure

Embed Size (px)

Citation preview

  • 8/7/2019 smartmarine3D_brochure

    1/24

    Smartmarine

    enterpriSefor offShoreImproving the Complete OffshoreProject Life Cycle

    in

    d

    u

    s

    t

    r

    y

  • 8/7/2019 smartmarine3D_brochure

    2/24

  • 8/7/2019 smartmarine3D_brochure

    3/24

    the futuretoday:smartmarineenterpriseHistorically, companies around the world have had to make considerable

    initial and ongoing investments to develop applications and integrate

    them with commercial solutions. In recognition o this business problem,

    Intergraph has spent the last 25 years developing and bringing to market

    a set o integrated applications that deliver and dene the engineering,

    construction, and abrication enterprises. SmartMarine Enterprise oers

    oshore clients the largest set o market-leading applications, starting

    rom the schematic design o an asset through to physical modeling,

    materials management, construction management, abrication automation,

    and inormation management.

    Intergraphs SmartMarine Enterprise applications are delivered with

    out-o-the box (OOTB) integrated architectures that seamlessly integrate

    the fow o inormation between applications. Data and design parameters

    are entered only once into the authoring disciplines and reused in down-

    stream disciplines (or example, process data rom the P&ID is published

    into the 3D model). The OOTB integration is not a simple data exchange

    process. It is a change management environment that acilitates publishing,

    retrieving, reviewing, and comparing data and documents electronically

    between disciplines.

    1

  • 8/7/2019 smartmarine3D_brochure

    4/24

    All o Intergraphs enterprise applications deliver

    global worksharing capabilities, providing companies

    with the ability to electronically share work internally

    or externally around the world in real time. In addition

    to the schedule benet o leveraging other oces,

    Intergraph workshare capabilities improve quality by

    electronically enorcing all o the project or company

    standards across the global share and maintaining

    interace points within an application and between

    dierent discipline applications.

    SmartMarine Enterprise solutions include rule-driven

    design, relationally-linked data between design disci-plines, and complete visible management throughout

    the lie o your oshore and marine acilities.

    SmartmarineenterpriSe GiveS

    Your CompanYreturn oninveStmentWhen our clients ully implement SmartMarine design

    applications and adjust processes to maximize

    the system, they report improved delivery schedules

    achieved with increased detail design productivity

    o up to 30 percent. Adding the enterprise materials,

    abrication, and construction applications can reduce

    construction costs by 12 percent and total installed

    cost by as much as 3.5 percent.

    Coe daa Moel Ee a sol Foaoo Maagg Egeeg daaData created in projects is important to protability,

    because the value o data increases over time.

    SmartMarine Enterprises data model provides ull

    access to engineering data, capturing graphics

    and associated inormation, as well as behavior

    and design intent. It is the oundation or a shared

    repository o all platorm design, construction,

    and management inormation. With SmartMarine

    2

    smartmarineenterprise

    provides a single, ully

    integrated environment

    or design, abrication,

    assembly, and lie- cycle

    management.

    m, ,

    k

    , , -

    k

    .

  • 8/7/2019 smartmarine3D_brochure

    5/24

    Enterprise, lie-cycle inormation management and com-

    pany best practices can orm the basis or oshore

    engineering knowledge management which increases

    innovation and protects company intellectual property.

    Beah o iegae Applcao AeeEe Mae WokowSmartMarine Enterprises breadth o integrated appli-

    cations addresses all critical inormation lie-cycle

    requirements or oshore acilities including inormation

    management, global workshare, materials and procure-

    ment management, engineering project and cost control,

    hull and topside preliminary design, structure designmodeling, 3D plant/outtting, abrication and construction

    planning, 3D outtting design modeling, 3D model design

    reviews, and handover and commissioning.

    Flexble, no-Popeay Achece EalyAap o Moe Eepe reqemeMicrosots standard architecture protects legacy

    data and current sotware systems. Unlike legacy

    architectures that cannot support todays work

    process demands, SmartMarine Enterprises archi-

    tecture supports data reuse, worksharing, distributed

    engineering, conguration management, lie-cycle

    data management, cost optimization, business

    system integration, Web access to both graphical

    and tabular inormation, and other workfows. The

    highly fexible architecture enables customization,

    integration o suppliers and subcontractors, and auto-mation o abrication and associated work processes.

    3

    smartmarine enterprise

    engineering &

    schematics

    3d modeling &

    visualization

    procurement,

    abrication, &

    construction

    smartplant

    alliance & partners

    SmartPlant P&ID/Design Validation

    SmartPlant Instrumentation

    SmartPlant Electrical

    SmartPlant Process Saety

    SmartSketch

    SmartPlant Explorer

    SmartMarine 3D

    SmartPlant 3D

    PDS /FrameWorksPlus SupportModeler

    SmartPlant Review/Publisher

    SmartPlant Layout

    SmartPlant MarkupSmartPlant Isometrics

    SmartPlant Materials

    SmartPlant Reerence

    Data/Standard Database

    SmartPlant Spoolgen

    SmartPlant Construction

    PRISM Project Estimator/Project Manager

    Technology members

    Service members

    Content members

    Complementary solutions

    inteGration and information manaGement

    Sp f

    automation and implementation ServiCeS

  • 8/7/2019 smartmarine3D_brochure

    6/24

    Aomae Feae rece Pojec tme a CoSmartMarine Enterprise reduces labor hours by automating

    traditional manual CAD tasks. It automatically produces

    drawings and reports as a by-product o the engineering

    design. Design reuse wizards capture data and provide an

    integrated environment to repurpose the design as catalog

    items. Context-sensitive, change-managed inormation is

    available to all project team members. This minimizes the risk

    o missed deadlines, unnecessary material purchases, design

    and abrication rework, and delays in platorm deployment,

    installation, and operations.

    Aomae ieace Maageme rece Coa scheleSmartMarine Enterprises streamlined interace substantially

    reduces the user learning curve. Global interaces among engi-

    neering disciplines, companies, and major project phases are

    electronically managed. Global project execution rom a central

    shared database prevents multi-site execution issues and

    extends engineering into abrication and construction which

    eliminates issues with disparate systems or manual interaces.

    rle-dve deg impove Pocvy a QalySmartMarine Enterprises engineering rules ensure design

    accuracy and consistency, automate work processes, and

    allow designers to ocus on the task at hand, rather than on

    how to operate the technology. Built-in rules and data rela-

    tionships help identiy standard components and eliminate

    variances between similar design decisions. Rules engines

    increase productivity, quality, and reliability by enabling aster,

    more ecient creation, transer, and review o the design and

    abrication phases o the project.

    4

  • 8/7/2019 smartmarine3D_brochure

    7/245

    SmartMarine 3D improved ourproductivity by reducing theman-hours required to designprojects. Its user-riendlyinterace and excellent graph-ics are an added advantageor us.

    Aziz Merchant

    General Manager, Engineering

    Keppel O&M

    t w --

    w

    w sm 3d -

    .

    image coey o Keppel FELs Lme

    5

  • 8/7/2019 smartmarine3D_brochure

    8/246

    Build YouroffShore deSiGn

    and manaGement

    SolutionStep BY StepDo you need a 3D design solution or an engineer-

    ing database today? Intergraph makes it simple.

    Select the SmartMarine Enterprise components

    you need, and have the fexibility to add solutions

    that can easily share inormation in the uture. Com-

    ponents include applications rom the SmartPlant

    and SmartMarine amilies.

    smaPla FoaoSmartPlant Foundation is the inormation manage-

    ment solution that controls the availability, integrity,

    and accuracy o all oshore engineering inormation.

    It serves as a comprehensive electronic library or the

    entire lie cycle o an oshore structure. SmartPlant

    Foundation also accommodates change manage-

    ment, workfow management, and document

    management. It houses a acilitys design, modica-

    tions, and upgrades eectively managing the

    conguration rom ront-end engineering design to

    plant decommissioning.

    smaMae 3dSmartMarine 3D is a single product modeling

    system that supports and streamlines the design,

    detailing, and abrication or foating and xed o-

    shore acilities. Its proven design, production, and

    lie-cycle management capabilities are contained

    within one integrated environment.

    smaPla LayoSmartPlant Layout tools or preliminary 3D plant

    layout include proposal development, early design

    estimates, plant layout optimization, automatic

    pipe routing, layout case management, and cost

  • 8/7/2019 smartmarine3D_brochure

    9/247

    estimation. The sotware allows reuse o preliminary

    plant layout designs without additional remodeling.

    smaPla MakpSmartPlant Markup provides precision viewing and

    markup capabilities or more than 150 ormats o

    engineering and business documents without the

    authoring application allowing or cost-eective

    collaboration on design and construction projects.smaPla revewSmartPlant Review is the complete visualization

    environment or interactively reviewing and analyzinglarge, complex 3D models during engineering, con-

    struction, operations, and maintenance. SmartPlant

    Review allows views rom any design perspective,

    helping acilitate project approvals by creating clear

    presentations to technical and non-technical audi-

    ences. SmartPlant Review Publisher supports the

    conversion o common plant ormats or viewing

    in SmartPlant Review.

    smaPla P&idSmartPlant P&ID creates intelligent piping and

    instrumentation diagrams (P&IDs) the roadmap

    o the plant while building, managing, and storing

    a comprehensive data model or design, construc-

    tion, and maintenance. SmartPlant P&ID Design

    Validation provides an automated workfow or

    examining data attributes and topology between

    the schematic and 3D environments.

    smaPla EleccalSmartPlant Electrical addresses the electrical engi-

    neering and design needs or the entire plant lie

    cycle including startup, continuous operation,

    emergencies, and shutdowns. SmartPlant Electrical

    generates single-line diagrams and schematics

    automatically, creating graphical reports based on

    data provided by the engineers.

    smaPla imeaoSmartPlant Instrumentation is the worlds leading

    application or instrumentation and control systems

    engineering, design, and maintenance. It stores

    and manages historical instrumentation and control

    data in a single easily accessible plant database to

    ensure consistency across the instrument tasks and

    deliverables. SmartPlant Instrumentation minimizes

    unscheduled shutdowns because only up-to-date

    inormation is used or planning and maintenance.

    smaPla iomecSmartPlant Isometrics is a powerul Microsot

    Windows-based application that reduces rom

    hours to minutes the time spent creating isometric

    drawings compared to using paper and pencil or

    2D CAD systems.

    smaPla spoolge

    SmartPlant Spoolgen or abricators incorporates

    abrication and construction inormation to design

    isometrics (IDFs and PCFs) rom SmartMarine 3D

    and automatically generates drawings and reports

    without recreating material data.

    smaskechSmartSketch is a 2D drawing generation sotware

    application that provides business diagramming

    with high-end drawing technology. SmartSketch

    oers a cost-eective precision engineering and

    drating technology that gives EPC rms and acility

    owner operators a competitive edge.

  • 8/7/2019 smartmarine3D_brochure

    10/24

  • 8/7/2019 smartmarine3D_brochure

    11/249

    intergraphsmartmarine

    users reportimproveddeliveryschedules

    withincreaseddetail designproductivity

    of up to30 percent.

  • 8/7/2019 smartmarine3D_brochure

    12/24

    smaPla Poce saeySmartPlant Process Saety is a saety modeling

    application that captures company HAZOP

    knowledge and applies it in HAZOP studies to

    lower operational risk and shorten schedules

    without compromising quality. It enables earlier

    hazard identication/remediation beore change

    becomes costly.

    smaPla MaealSmartPlant Materials oers an integrated lie-cycle

    material and supply chain management solution

    that provides a common collaboration platormor all partners in a projects supply chain rom

    preliminary design, to detail engineering, through

    purchasing and construction. SmartPlant Materials

    allows sharing o data with dierent design sys-

    tems, clients, subcontractors, and suppliers, as

    well as data reuse in subsequent projects.

    smaPla reeece daaSmartPlant Reerence Data provides materials

    libraries and enables database standardization,

    change management, and global worksharing

    via the Web. It maintains catalog, pipe specica-

    tions, and interaces or all o the SmartPlant and

    SmartMarine core applications, and includes

    interaces to PDS, PDMS Interace, SAP R/3, and

    Open Ident. Standard Database or SmartPlant

    Reerence Data oers a pre-congured, best

    practice catalog o standard OOTB material parts.

    smaPla CocoSmartPlant Construction manages construction

    resources, materials, and schedules o construction

    companies, project management oces, abrica-

    tors, and owners. SmartPlant Construction helps

    companies realize signicant savings throughout

    the lie o a construction project by incorporating

    the dynamic inputs rom engineering, procurement,

    abrication, site materials management, and

    labor plans.

    PrisM Pojec Emao & Pojec MaagePRISM Project Estimator is a multi-project, multi-

    user, concurrent access database or developing

    and maintaining project cost estimates. PRISM

    Project Manager provides cost management,

    engineering management, contracts management,

    and risk management capabilities.

    Complemeay Applcao

    Intergraph oers a wide range o complementaryapplications rom strategic partners and other

    third-party application vendors. Using these with

    SmartMarine Enterprise urther increases your ability

    to make dramatic schedule reductions and increase

    the quality o design and project deliverables.

    ComponenthiGhliGhtSsmaMae 3d o Ohoe

    SmartMarine 3D is a single product modeling

    system that supports and streamlines all o the

    design, detailing, and abrication or foating and

    xed oshore acilities. SmartMarine 3D is

    a data-centric, multidiscipline environment

    that encompasses all o the 3D modeling and

    automatic drawing unctions necessary to per-

    orm modeling design tasks, such as structural,

    piping, equipment design, electrical, and HVAC,

    as well as architecture/living quarters. Additional

    SmartMarine 3D applications complement these

    major unctions to create the abrication details,

    assembly sequencing, and drawings. SmartMarine

    3Ds advanced scalability and modular design

    enables organizations o any size to congure the

    exact type o system that meets their workfow

    and workload requirements.

    10

  • 8/7/2019 smartmarine3D_brochure

    13/24

    sgle Applcao scope a daabaeSmartMarine 3D integrates seamlessly and shares

    inormation with other SmartMarine Enterprise

    applications, as well as integrated legacy systems.

    SmartMarine 3D is a single integrated environ-

    ment that provides all o the capabilities to design,

    abricate, and build a marine acility. Using one

    application or the whole process reduces IT

    costs or managing multiple systems and elimi-

    nates costs associated with integrating disparate

    databases. The single environment improves

    oshore design quality and productivity, while

    enabling you to rapidly adjust to your customerschange requests.

    no-Popeay daabae a ApplcaoSmartMarine 3D has no proprietary sotware

    languages or applications. It natively uses all

    Microsot technologies or every aspect o the

    application, including SQL Server database,

    Excel reporting, Visual Basic, and .NET con-

    guration tools. No CAD engine is required, and

    there is no dependency on CAD le structures.

    Global WokhaeSmartMarine 3D enables designers, yards, sub-

    contractors, suppliers, authorities, and others

    to easily and eectively manage and execute

    projects across company and country borders.

    Powerul Microsot SQL Server relational data-

    base replication tools allow disciplines to work

    concurrently across multiple locations users

    share all modications in near real-time, and built-

    in security eatures restrict access as needed.

    Changes transmit asynchronously between sites,

    drastically improving network perormance. I

    communications are lost, the local database

    continues to run with its current inormation, and

    changes are queued until communications

    are re-established.

    1

    intergraphs

    smartmarine3d reducesthe riskof humanerror andensures more

    reliable,consistentdesigns andend-buildswith fewerwork-arounds.

  • 8/7/2019 smartmarine3D_brochure

    14/2412

    We have been using SmartMarine 3D in production on numerous oshoreprojects, [which] is helping us achieve greater productivity and higherquality designs. The enhancements included in the newest version oSmartMarine 3D will assist us in gaining a urther competitive edge withinthe marine industry.

    Liang Guoming

    Deputy General Manager, Technical Center

    COSCO Shipyard Group

    Aomae a Maage dawg arepo delveable

    Automated drawings and reports reduce the cost o

    design and provide accurate, up-to-date documen-

    tation o the design at any time. SmartMarine 3D

    generates ully dimensioned, annotated, and time/

    date-stamped drawings and reports that are based

    on rules or view, scale, ont styles, drawing borders,

    background sheets, etc. Drawings correlate with

    the 3D model, so changes in the model will trigger

    an automatic notication that the drawing/report is

    out o date and needs to be updated. Reports are

    generated using Microsot Excel templates.

    Chage Maageme a rle Egeo spec-dve degSmartMarine 3Ds patented relationship management

    engine establishes and maintains relationships and

    changes between physical objects. The spec-driven

    environment enorces a projects engineering rules

    across all disciplines. For example, i a pipe supports

    position changes, then the relationship engine auto-

    matically updates its relationship to the pipeline

    and to the structure to which it is attached. Built-in

    correlations enable on-screen graphical checks.

    The relationship engine also distinguishes signicant

    changes rom insignicant ones.

    ieacve a Bach ieace MaagemeSmartMarine 3D provides two types o intererence

    detection. Database Intererence Detection is a

    continuous batch process that detects and stores

    hard and sot intererences between all objects in

    the database where they can be graphically dis-

    played and reported. Local Intererence Detection

    detects intererences between modied objects

    and other objects in the current workspace

    providing the routing user immediate eedback

    during model creation.

    Pla/Ofg deg Applcaoa scopeBacked by more than $100M in research and

    development, SmartMarine 3D represents the

    industrys most advanced engineering designsystem. The common modeling environment

    crosses all disciplines: structural, equipment,

    piping, hangers, electrical, HVAC, and buildings.

    SmartMarine 3D streamlines oshore processes

    while preserving the integrity o design data and

    making data more useable (and reusable) through-

    out the entire lie cycle o the structure.

    tak Wza

    SmartMarine 3D walks users through the se-

    quence o steps to execute a command. Rather

    than relying on dialog boxes and pulldowns or

    toolbars, SmartMarine 3Ds simplied user inter-

    ace reveals only input elds and options pertinent

    to the current operation. Design reuse wizards allow

    best-in-class design congurations to be saved

    providing quicker, more accurate responses to

    requests or proposals and ast-track projects.

  • 8/7/2019 smartmarine3D_brochure

    15/24

  • 8/7/2019 smartmarine3D_brochure

    16/24

  • 8/7/2019 smartmarine3D_brochure

    17/241

    competitivesystems, but ultimately choseSmartPlant Enterprise, particularlySmartPlant 3D, because no otherenterprise system provided us the

    productivity gains possible with theIntergraph system.

    competitivesystems, but ultimately choseSmartPlant Enterprise, particularlySmartPlant 3D, because no otherenterprise system provided us theproductivity gains possible with the

    Intergraph system.

    SmartMarine 3Ds fow-through datarom 2D to 3D design (and back) givesus a ail-sae way to ensure all changeshave been made to our drawings andour models weve almost eliminated

    last-minute workarounds due to amissed design component in one aspecto the process.

    SmartMarine 3D User

    The hole manager in SmartMarine3D is so intuitive when you movea pipe that goes through a hole in aplate the hole moves with the pipebased on your rules. It makes somuch sense why cant all design

    be this simple?

  • 8/7/2019 smartmarine3D_brochure

    18/24

    scal MoelgSome o the critical oshore structural modeling

    eatures o SmartMarine 3D include:

    Curved plates and proles

    Structure relationship rules engine

    Rule-based joints

    Built up members

    Advanced plate systems (APS) or rule-based

    design o complex plate structures such as

    nodal connections

    Automated detailing or modeling, detailing,

    and abrication

    Hole MaagemeWith SmartMarine 3D, outtters can request holes/

    penetrations in structural objects such as decks,

    walls, or proles. Structural engineers will be notied

    and requested to approve the physical hole to be

    made based on structural integrity verication.

    You can place single or multiple holes, and multiple

    objects can go through the same hole. The system

    can automatically determine hole size and geometry.

    For example, you can place sleeves automatically.

    Automatic relationships between outtting objects

    and the penetration ensure the penetration updates

    properly i the object changes.

    PlagSmartMarine 3Ds planning environment reduces

    the overall project schedule by allowing you to dene

    physical boundaries and construction packages

    or the dierent modules/blocks at early stages o

    your project. These dynamic, multi-discipline de-

    nitions dene the objects belonging to each block

    and the total volume, weight, and center o gravity or

    the module. The modules are urther divided into

    assemblies and sub-assemblies that contain detailed

    assembly orientations, installation sequences, and

    work center assignments. The denitions are made

    across a database, and are not constrained by les

    or the plant breakdown structure, which enables

    16

  • 8/7/2019 smartmarine3D_brochure

    19/24

    you to modiy them at any time to refect abrication/

    installation methodology changes. SmartMarine 3D

    provides even greater productivity benets when

    installed into Intergraphs SmartMarine Enterprise

    environment, which expands and integrates the

    modeling capabilities o Intergraphs schematic

    design and inormation management applications.

    top BenefitS ...direCtlY fromdeSiGnerSWhy do leading oshore companies choose

    SmartMarine 3D? Once designers have workedwith the product, they dont want to switch back!

    Heres why:

    SmartMarine 3D allows you to design once. The

    system remembers your rules and maintains your

    design, even through multiple changes.

    SmartMarine 3D minimizes rework and errors

    the clash system runs automatically in the back-

    ground to ensure you dont have to remember to

    run separate checks.

    The hole manager in SmartMarine 3D is so

    intuitive when you move a pipe that goes

    through a hole in a plate the hole moves with

    the pipe based on your rules. It makes so much

    sense why cant all design be this simple?

    SmartMarine 3Ds fow-through data rom 2D to

    3D design (and back) gives us a ail-sae way to

    ensure all changes have been made to our draw-

    ings and our models weve almost eliminated

    last-minute workarounds due to a missed design

    component in one aspect o the process.

    Drawings in SmartMarine 3D are considered an

    object just like a pipe or a piece o steel alive at all

    times, and linked you can pull up the drawing,

    click on a pipe, and its highlighted and selected

    in your model.

    Onshore or oshore, you need piping support.

    SmartMarine 3D automatically puts in any o the

    turns or fanges that are needed; you can change

    the options as you go since the system is rule-

    based, it wont let you add something that doesnt

    it with the specs. No more speciying each

    individual piece!

    SmartMarine Enterprise or Oshore oers

    connectivity and relationships between joining

    design members (columns, beams, pipes, etc.)

    Since the sotware is rule-based, when elements o

    a design are modied later, other elements change

    with it automatically.

    find out more aBouthow SmartmarineenterpriSe Canwork for You!

    Reduce engineering labor hours by automating

    traditional manual CAD tasks.

    SmartMarine Enterprise automatically produces

    drawings and reports as a by-product o the

    engineering design.

    Eliminate multi-site execution issues.

    SmartMarine Enterprise provides built-in

    support or global project execution rom a

    central shared database.

    Enhance capital perormance using sustain-

    able standardization o all design components.

    SmartMarine Enterprise uses rules and data

    relationships to identiy standard compo-

    nents, stopping variances between similar

    design decisions.

    Reduce construction costs up to 10 percent

    and inventory expenses up to 15 percent.

    Reduce total installed cost (TIC) by as much as

    3.5 percent.

    Reuse your technical inormation.

    Find out more about how SmartMarine Enterprise

    rom Intergraph can save you money and increase

    your project eciency. Visit www.intergraph.com/

    smartmarine3D or more inormation, or contact

    [email protected] to speak to a global

    specialist today.

    1

  • 8/7/2019 smartmarine3D_brochure

    20/2418

    intergraph:

    history ofexcellenceintergraph has provided innovative plant and marine

    inormation management and design solutions to the

    process industries since 1978:

    1969 b m&s c w wk a

    1978 o f

    1980 b i

    1984 l pds, w w

    1991 W u.s. n cad2

    1996 iai w u.s. n

    aw darpa compass

    grad

    1998 i sp , f

    f ; w 300

    1999 aq sp i, w n. 1

    , ,

    2001 aq sp m, w n. 1

    2003 l s 3d (sp 3d sm 3d); 35

    -- w 2008

    2004 s h i sm e-

    2009 nw sm 3d sm e

    2009 mk 40 , ,

  • 8/7/2019 smartmarine3D_brochure

    21/24

  • 8/7/2019 smartmarine3D_brochure

    22/24

  • 8/7/2019 smartmarine3D_brochure

    23/24

    aboutintergraphIntergraph is the leading global provider o engineering and geospatial

    sotware that enables customers to visualize complex data. Businesses

    and governments in more than 60 countries rely on Intergraphs industry-

    specic sotware to organize vast amounts o data into understandable

    visual representations and actionable intelligence. Intergraphs sotware

    and services empower customers to build and operate more ecient

    plants and ships, create intelligent maps, and protect critical inrastruc-

    ture and millions o people around the world.

    Intergraph operates through two divisions: Process, Power & Marine

    (PP&M) and Security, Government & Inrastructure (SG&I). Intergraph

    PP&M provides enterprise engineering sotware or the design, constru-

    ction, and operation o plants, ships, and oshore acilities. Intergraph

    SG&I provides geospatially powered solutions to the deense and

    intelligence, public saety and security, government, transportation,

    photogrammetry, utilities, and communications industries.

    For more inormation, visit www.intergraph.com.

    2

  • 8/7/2019 smartmarine3D_brochure

    24/24

    www. egaph.com

    iegaph, he iegaph logo, smaPla,

    smaskech, Pds, FameWok, a spoolge ae

    egee aemak o iegaph Copoao.

    Mcoo, Wow, sQL seve, Excel, a Val

    Bac ae egee aemak o Mcoo

    Copoao. Ohe ba a poc ame

    ae aemak o he epecve owe.