Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
2015-12-21 1
2015-12-21
SMARTLED 0603
Datasheet
Version 1.3 (Replacement in due course)
LW L283
Features: Besondere Merkmale:
• Package: SMT package 0603, colored diffused resin
• Gehäusetyp: SMT Gehäuse 0603, farbiger diffuser Verguss
• Technology: InGaN • Technologie: InGaN • Viewing angle at 50 % IV: 170° (horizontal); 130°
(vertical)• Abstrahlwinkel bei 50 % IV: 170° (horizontal);
130° (vertical)• Color: Cx = 0.32, Cy = 0.31 acc. to CIE 1931
(white); CTR = 6200 K• Farbe: Cx = 0.32, Cy = 0.31 nach CIE 1931 (weiß);
CTR = 6200 K• Optical efficiency (typ.): 14 lm/W (white) • Optischer Wirkungsgrad (typ.): 14 lm/W (weiß)
Applications Anwendungen
• LCD Backlighting • LCD Beleuchtung• Toys • Spielsachen• Signal and Symbol Luminary • Signal- und Symbolleuchten• Outdoor displays • Informationsanzeigen im Außenbereich
2015-12-21 2
Version 1.3 (Replacement in due course) LW L283
Ordering Information
Bestellinformation
Type: Luminous Intensity 1) page 22 Ordering Code
Typ: Lichtstärke 1) Seite 22 Bestellnummer
IF = 10 mA
IV [mcd]
LW L283-P2R1-3K8L-1 56 ... 140 Q65110A1550
LW L283-Q1R2-3K8L-1 71 ... 180 Q65110A1647
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will
be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LW L283-Q1R2-3K8L-1 means
that only one group Q1, Q2, R1, R2 will be shippable for any packing unit.
In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on
any one packing unit. LW L283-Q1R2-3K8L-1 means that the device will be shipped within the specified limits.
In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped
on any packing unit. E. g. LW L283-Q1R2-3K8L-1 means that only one forward voltage group 3B,4A,4B,5A,5B will be shippable.
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen
(siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LW L283-Q1R2-3K8L-1 bedeutet,
dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen Q1, Q2, R1, R2 enhalten ist.
Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine
Farbortgruppe geliefert. Z.B. LW L283-Q1R2-3K8L-1 bedeutet, dass in einer Verpackungseinheit nur eine der Farbortgruppen
enthalten ist. LW L283-Q1R2-3K8L-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird.
Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit
wird nur eine Durchlassspannungsgruppe geliefert. Z. B. LW L283-Q1R2-3K8L-1 bedeutet, dass nach Durchlassspannungsgruppen
gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen 3B,4A,4B,5A,5B enthalten (siehe Seite 5).
Version 1.3 (Replacement in due course) LW L283
2015-12-21 3
Maximum Ratings
Grenzwerte
Parameter Symbol Values Unit
Bezeichnung Symbol Werte Einheit
Operating temperature rangeBetriebstemperatur
Top -40 ... 100 °C
Storage temperature rangeLagertemperatur
Tstg -40 ... 100 °C
Junction temperatureSperrschichttemperatur
Tj 110 °C
Forward current
Durchlassstrom
(TA = 25 °C)
IF 20 mA
Surge currentStoßstrom(t ≤ 10 µs; D = 0.1; TA = 25 °C)
IFM 200 mA
Reverse voltage 2) page 22
Sperrspannung 2) Seite 22
(TA = 25 °C)
VR 5 V
ESD withstand voltageESD Festigkeit(acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class 2)
VESD 2 kV
2015-12-21 4
Version 1.3 (Replacement in due course) LW L283
Characteristics (TA = 25 °C; IF = 10 mA)Kennwerte
Parameter Symbol Values Unit
Bezeichnung Symbol Werte Einheit
Chromaticity coordinates acc. to CIE 1931 3) page 22
Farbkoordinaten nach CIE 1931 3) Seite 22 (typ.)(typ.)
CxCy
0.320.31
--
Viewing angle at 50 % IVAbstrahlwinkel bei 50 % IV
(typ.) 2ϕ 170 (horizontal)130 (vertical)
°
Forward voltage 4) page 22
Durchlassspannung 4) Seite 22 (min.)(typ.)(max.)
VFVFVF
2.753.103.50
VVV
Reverse current
Sperrstrom
(VR = 5 V)
(typ.)(max.)
IRIR
0.0110
µAµA
Temperature coefficient of VFTemperaturkoeffizient von VF
(typ.) TCV -4.5 mV/K
Temperature coefficient of xTemperaturkoeffizient von x
(typ.) TCx -0.1 10-3/K
Temperature coefficient of yTemperaturkoeffizient von y
(typ.) TCy -0.2 10-3/K
Real thermal resistance junction / ambient 5) page 22 ,
6) page 22
Realer Wärmewiderstand Sperrschicht / Umgebung 5) Seite 22 , 6) Seite 22
(max.) Rth JA real 450 K/W
Real thermal resistance junction / solder point 6) page 22
Realer Wärmewiderstand Sperrschicht / Lötpad 6) Seite 22
(max.) Rth JS real 260 K/W
Note: Individual forward voltage groups see next page
Anm.: Durchlassspannungsgruppen siehe nächste Seite
Version 1.3 (Replacement in due course) LW L283
2015-12-21 5
Brightness Groups
Helligkeitsgruppen
Forward Voltage Groups 4) page 22
Durchlassspannungsgruppen 4) Seite 22
Group Luminous Intensity 1) page 22 Luminous Intensity 1) page 22 Luminous Flux 7) page 22
Gruppe Lichtstärke 1) Seite 22 Lichtstärke 1) Seite 22 Lichtstrom 7) Seite 22
(min.) Iv [mcd] (max.) Iv [mcd] (typ.) ΦV [mlm]
P2 56 71 254
Q1 71 90 322
Q2 90 112 404
R1 112 140 504
R2 140 180 640
Group
Gruppe (min.) VF [V] (max.) VF [V]
3B 2.75 2.90
4A 2.90 3.05
4B 3.05 3.20
5A 3.20 3.35
5B 3.35 3.50
2015-12-21 6
Version 1.3 (Replacement in due course) LW L283
Color Chromaticity Groups 3) page 22
Farbortgruppen 3) Seite 22
Chromaticity Coordinate Groups 3) page 22
Farbortgruppen 3) Seite 22
Group
Gruppe
Cx Cy Group
Gruppe
Cx Cy Group
Gruppe
Cx Cy
3K 0.2660 0.2320 7K 0.3300 0.3100 5L 0.2850 0.2790
0.2730 0.2270 0.3300 0.3300 0.2910 0.2680
0.2800 0.2520 0.3380 0.3420 0.3070 0.3120
0.2860 0.2440 0.3520 0.3440 0.3100 0.2970
4K 0.2800 0.2520 8K 0.3380 0.3420 6L 0.3070 0.3120
0.2860 0.2440 0.3520 0.3440 0.3100 0.2970
0.2910 0.2680 0.3600 0.3570 0.3300 0.3300
0.2960 0.2590 0.3640 0.3800 0.3300 0.3470
5K 0.2910 0.2680 3L 0.2580 0.2390 7L 0.3300 0.3300
0.2960 0.2590 0.2660 0.2320 0.3300 0.3470
0.3100 0.2970 0.2730 0.2610 0.3450 0.3520
0.3130 0.2840 0.2800 0.2520 0.3470 0.3710
OHA08327
520530
540
550
560
570
580590
600610
620630
00
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
510
500
490
480470
450460
0.25
0.20
+
E
Cy
Cx
Cx
Cy
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.21
0.23
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.41
0.26
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
3K
4K
5K
6K
7K
8K
3L
4L
5L
6L
7L
8L
+
Version 1.3 (Replacement in due course) LW L283
2015-12-21 7
6K 0.3100 0.2970 4L 0.2730 0.2610 8L 0.3450 0.3520
0.3130 0.2840 0.2800 0.2520 0.3470 0.3710
0.3300 0.3100 0.2850 0.2790 0.3640 0.3800
0.3300 0.3300 0.2910 0.2680 0.3670 0.4010
Group
Gruppe
Cx Cy Group
Gruppe
Cx Cy Group
Gruppe
Cx Cy
2015-12-21 8
Version 1.3 (Replacement in due course) LW L283
Group Name on Label
Gruppenbezeichnung auf Etikett
Example: Q1-3K-3BBeispiel: Q1-3K-3B
Brightness
Helligkeit
Chromaticity Coordinate
Farbort
Forward Voltage
Durchlassspannung
Q1 3K 3B
Note: No packing unit / tape ever contains more than one group for each selection.
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
Version 1.3 (Replacement in due course) LW L283
2015-12-21 9
Relative Spectral Emission - V(λ) = Standard eye response curve 7) page 22
Relative spektrale Emission - V(λ) = spektrale Augenempfindlichkeit 7) Seite 22
Irel = f (λ); TA = 25 °C; IF = 10 mA
Radiation Characteristics 7) page 22
Abstrahlcharakteristik 7) Seite 22
Irel = f (ϕ); TA = 25 °C
40
0400
20
60
80relI
100%
nmλ
OHL00491
Vλ
450 500 550 600 650 700
OHL01463
0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚0.40.60.81.0100˚
90˚
80˚
70˚
60˚
50˚
0˚10˚20˚30˚40˚
0
0.2
0.4
0.6
0.8
1.0ϕ
verticalhorizontal
vertical
horizontal
2015-12-21 10
Version 1.3 (Replacement in due course) LW L283
Forward Current 7) page 22 , 8) page 22
Durchlassstrom 7) Seite 22 , 8) Seite 22
IF = f (VF); TA = 25 °C
Relative Luminous Intensity 7) page 22 , 8) page 22
Relative Lichtstärke 7) Seite 22 , 8) Seite 22
IV/IV(10 mA) = f(IF); TA = 25 °C
Chromaticity Coordinate Shift 7) page 22
Farbortverschiebung 7) Seite 22
Cx, Cy = f(IF); TA = 25 °C
Relative Luminous Intensity 7) page 22
Relative Lichtstärke 7) Seite 22
IV/IV(25)°C = f(Tj); IF = 10 mA
OHL01232
2.5
mA
100
2.7 2.9 3.1 3.3 3.5 3.7 3.9 V 4.3
101
210
IF
VF
10 -1
101
010 mA
FI
IV (10 mA)
IV
10 15 10 2
100
OHL11233
5
0.2900
Cy
Cx, Cy
Cx
IF
OHL00099
10 20 30 40 mA 60
0.295
0.300
0.305
0.310
0.315
0.320
0.325
0.330
0.335
0.340
0.345OHL01870
-600
T˚C
V (25 ˚C)IIV
-40 -20 0 20 40 60 100
0.2
0.4
0.6
0.8
1.0
1.2
1.4
j
Version 1.3 (Replacement in due course) LW L283
2015-12-21 11
Max. Permissible Forward Current
Max. zulässiger Durchlassstrom
IF = f (T)
Permissible Pulse Handling Capability
Zulässige Impulsbelastbarkeit IF = f(tp)
D: Duty cycle, TA = 25 °C
Permissible Pulse Handling Capability
Zulässige Impulsbelastbarkeit IF = f(tp)
D: Duty cycle, TA = 85 °C
temp. solder point
40200
T
0S
1008060 ˚C
T
IF
mA
OHL00186
5
10
15
20
25
temp. ambientTA
TA TS
OHL01989
10-5
pt
FI
10-4 10-3 10-2 10-1 100 1010
A
210s
DtP
T=T
PtIF
0.01
0.05
0.20.1
0.005
0.02
0.5
D =
1
0.05
0.10
0.15
0.25 OHL01990
10-5
pt
FI
10-4 10-3 10-2 10-1 100 1010
A
210s
DtP
T=T
PtIF
0.01
0.05
0.20.1
0.005
0.02
0.5
D =
1
0.05
0.10
0.15
0.25
2015-12-21 12
Version 1.3 (Replacement in due course) LW L283
Package Outline 9) page 22
Maßzeichnung 9) Seite 22
Approximate Weight: 1.6 mg
Gewicht: 1.6 mg
Mark: Cathode
Markierung: Kathode
GPLY7057
0.8 (0.031) ±0.1 (0.004)
Cathode
+0.05 (0.002)-0.03 (0.001)0.125 (0.005)
1.7
(0.0
67)±
0.1
(0.0
04)
7˚ m
ax
+0.02 (0.001)-0.05 (0.002)0.65 (0.026)
5˚
1.3
(0.0
51)±
0.1
(0.0
04)
marking markingCathode
±0.05 (0.002)0.7 (0.028)
A
C
Version 1.3 (Replacement in due course) LW L283
2015-12-21 13
Recommended Solder Pad 9) page 22 Reflow solderingEmpfohlenes Lötpaddesign 9) Seite 22 Reflow-Löten
Recommended Solder Pad 9) page 22 Reflow solderingEmpfohlenes Lötpaddesign 9) Seite 22 Reflow-Löten
0.8 (0.031)
0.7 (0.028)
OHAPY606
0.8
(0.0
31)
0.8 (0.031)
OHPY3832
0.8 (0.031)
0.7 (0.028)
0.8
(0.0
31)
0.05 (0.002)
0.6 (0.024)
Solder stencil aperture
0.05
(0.0
02)
0.7
(0.0
28)
Copper solder pad
2015-12-21 14
Version 1.3 (Replacement in due course) LW L283
Note: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning.
Anm.: Um eine verbesserte Lötstellenkontaktierung zu erreichen, empfehlen wir, unter Standard- Stickstoffatmosphäre zu löten. Das Gehäuse ist für Ultraschallreinigung nicht geeignet.
Version 1.3 (Replacement in due course) LW L283
2015-12-21 15
Reflow Soldering Profile
Reflow-Lötprofil
Product complies to MSL Level 2 acc. to JEDEC J-STD-020D.01
00
s
OHA04525
50
100
150
200
250
300
50 100 150 200 250 300
t
T
˚C
St
t
Pt
Tp240 ˚C
217 ˚C
245 ˚C
25 ˚C
L
OHA04612
Profile Feature
Profil-Charakteristik
Ramp-up rate to preheat*)
25 °C to 150 °C2 3 K/s
Time tS TSmin to TSmax
tS
tL
tP
TL
TP
100 12060
10 20 30
80 100
217
2 3
245 260
3 6
Time25 °C to TP
Time within 5 °C of the specified peaktemperature TP - 5 K
Ramp-down rate*TP to 100 °C
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
Ramp-up rate to peak*)
TSmax to TP
Liquidus temperature
Peak temperature
Time above liquidus temperature
Symbol
Symbol
Unit
Einheit
Pb-Free (SnAgCu) Assembly
Minimum MaximumRecommendation
K/s
K/s
s
s
s
s
°C
°C
480
2015-12-21 16
Version 1.3 (Replacement in due course) LW L283
Taping 9) page 22
Gurtung 9) Seite 22
OHAY1491
1.5 (0.059) 4 (0.157)
2 (0.079) 0.9 (0.035)3.
5 (0
.138
)
1.75
(0.0
69)
8 (0
.315
)
1.8
(0.0
71)
A
C
0.8 (0.031)
Version 1.3 (Replacement in due course) LW L283
2015-12-21 17
Tape dimensions [mm]
Gurtmaße [mm]Tape dimensions in mm
Reel dimensions [mm]
Rollenmaße [mm]Reel dimensions in mm
Tape and Reel
Gurtverpackung
8 mm tape with 5000 pcs. on ∅ 180 mm reel
W P0 P1 P2 D0 E F
8 + 0.3 / -0.1 4 ± 0.1 2 ± 0.05or4 ± 0.1
2 ± 0.05 1.5 ± 0.1 1.75 ± 0.1 3.5 ± 0.05
A W Nmin W1 W2max
180 8 60 8.4 + 2 14.4
D0
2P
P0
1P
WFE
Direction of unreeling
N
W1
2W
A
OHAY0324
Label
Leader:Trailer:
13.0
Direction of unreeling
±0.2
5
min. 160 mm *
min. 400 mm *
*) Dimensions acc. to IEC 60286-3; EIA 481-D
2015-12-21 18
Version 1.3 (Replacement in due course) LW L283
Barcode-Product-Label (BPL)
Barcode-Produkt-Etikett (BPL)
Dry Packing Process and Materials
Trockenverpackung und Materialien
Note:Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Anm.:Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte.Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
OHA04563
(G) GROUP:
1234567890(1T) LOT NO: (9D) D/C: 1234
(X) PROD NO: 123456789
(6P) BATCH NO: 1234567890
LX XXXX
RoHS Compliant
BIN1: XX-XX-X-XXX-X
MLX
Temp STXXX °C X
Pack: RXX
DEMY XXX
X_X123_1234.1234 X
9999(Q)QTY:
SemiconductorsOSRAM Opto
XX-XX-X-X
EXAMPLE
X_X123_1234.1234 XX_X123_1234.1234 X
EXAMPLE
EXAMPLE
EXAMPLE
XXXXXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-XXX-XX-X-X
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
XXXXXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-XXX-XX-X-X
EXAMPLE
Pack: RXX
XXX
X_X123_1234.1234 XX_X123_1234.1234 X
XX-XX-X-X
EXAMPLE
Pack: RXXPack: RXX
DEMY DEMY
EXAMPLE
1234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:(9D) D/C: 12341234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
12341234
EXAMPLE
Pack: RXXPack: RXX
DEMY
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:(9D) D/C:
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C: 1234
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(9D) D/C:
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
12345678901234567890EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(6P) BATCH NO:(6P) BATCH NO: 12345678901234567890
SemiconductorsSemiconductors
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
EXAMPLE
(6P) BATCH NO:(6P) BATCH NO: 12345678901234567890EXAMPLE
SemiconductorsSemiconductorsOSRAM OptoOSRAM Opto
EXAMPLE
EXAMPLE
1234567890
X_X123_1234.1234 X
Pack: RXX
DEMY
X_X123_1234.1234 X
(9D) D/C: 1234(9D) D/C:
1234567890(6P) BATCH NO: 1234567890
OSRAM Opto
XXX
X_X123_1234.1234 X
XX-XX-X-X
Pack: RXX
DEMY
Semiconductors
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately afterbag opening.
Discard if circles overrun.Avoid metal contact.
WET
Do not eat.
Comparatorcheck dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10%bake units
bake units
If wet,
change desiccant
If wet,
Humidity IndicatorMIL-I-8835
If wet,
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
Version 1.3 (Replacement in due course) LW L283
2015-12-21 19
Transportation Packing and Materials
Kartonverpackung und Materialien
Dimensions of transportation box in mm
Width Length Height
Breite Länge Höhe
200 ± 5 195 ± 5 30 ± 5
OHA02044
PACKVAR:
R077Additional TEXT
P-1+Q-1
Multi TOPLED
Muste
r
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
10
(9D) D/C:
11(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY: 2000
0144
(G) GROUP:
260 C RT240 C R
3
220 C R
MLBin3:Bin2: Q
-1-20
Bin1: P-1-20
LSY T6762
2a
Temp ST
R18DEMY
PACKVAR:
R077Additional TEXT
P-1+Q-1
Multi TOPLED
Muste
r
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
10
(9D) D/C:
11(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY: 2000
0144
(G) GROUP:
260 C RT240 C R
3
220 C R
MLBin3:Bin2: Q
-1-20
Bin1: P-1-20
LSY T6762
2a
Temp ST
R18DEMY
OSRAM
Packing
Sealing label
Barcode label
Mois
ture
Level 3
Flo
or tim
e 168 H
ours
Mois
ture
Level 6
Flo
or tim
e 6
Hours
a) H
umid
ity In
dicato
r C
ard is
> 1
0% w
hen read a
t 23 ˚
C ±
5 ˚C
, or
reflo
w, v
apor-phase r
eflow
, or equiv
alent p
rocessin
g (peak p
ackage
2. Afte
r th
is b
ag is o
pened, devic
es that w
ill b
e subje
cted to
infrare
d
1. Shelf
life in
seale
d bag: 2
4 month
s at <
40 ˚
C a
nd < 9
0% rela
tive h
umid
ity (R
H).
Mois
ture
Level 5
a
at facto
ry c
onditions o
f
(if b
lank, s
eal date
is id
entical w
ith d
ate c
ode).
a) M
ounted w
ithin
b) S
tore
d at
body tem
p.
3. Devic
es require
bakin
g, befo
re m
ounting, i
f:
Bag s
eal date
Mois
ture
Level 1
Mois
ture
Level 2
Mois
ture
Level 2
a4. If b
aking is
require
d,
b) 2a o
r 2b is
not m
et.
Date
and ti
me o
pened:
refe
rence IP
C/J
ED
EC
J-S
TD
-033 fo
r bake p
rocedure
.
Flo
or tim
e see b
elow
If bla
nk, see b
ar code la
bel
Flo
or tim
e > 1
Year
Flo
or tim
e 1
Year
Flo
or tim
e 4
Weeks10%
RH
.
_<
Mois
ture
Level 4
Mois
ture
Level 5
˚C).
OPTO
SEM
ICO
NDUCTORS
MO
ISTURE S
ENSITIV
E
This b
ag conta
ins
CAUTION
Flo
or tim
e 72 H
ours
Flo
or tim
e 48 H
ours
Flo
or tim
e 24 H
ours
30 ˚C
/60%
RH
.
_<
LE
VE
L
If bla
nk, see
bar code la
bel
Barcode label
2015-12-21 20
Version 1.3 (Replacement in due course) LW L283
Notes Hinweise
The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation.
Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Exempt group (Expositionsdauer 10000 s). Unter realen Umständen (für Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefährdung aus. Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporär eingeschränktes Sehvermögen oder auch Nachbilder zu Irritationen, Belästigungen, Beeinträchtigungen oder sogar Unfällen führen.
This LED contains metal materials. Corroded metal may lead to a worsening of the optical performance of the LED and can in the worst case lead to a failure of the LED. Do not expose this LED to aggressive atmospheres. Note, that corrosive gases may as well be emitted from materials close to the LED in the final product.
Diese LED enthält teilweise metallische Bestandteile. Korrodiertes Metall kann zu einer Verschlechterung der optischen Eigenschaften und im schlimmsten Fall zum Ausfall der LED führen. Diese LED darf aggressiven Bedingungen nicht ausgesetzt werden. Es ist zu beachten, dass korrosive Gase auch von Materialien emittiert werden können, die sich im Endprodukt in unmittelbarer Umgebung der LED befinden.
For further application related informations
please visit www.osram-os.com/appnotes
Für weitere applikationsspezifische
Informationen besuchen Sie bitte
www.osram-os.com/appnotes
Version 1.3 (Replacement in due course) LW L283
2015-12-21 21
Disclaimer Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language wordings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet.Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.Components used in life-support devices or
systems must be expressly authorized for such
purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.**) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.
Bei abweichenden Angaben im zweisprachigen Wortlaut haben die Angaben in englischer Sprache Vorrang.
Bitte beachten!
Lieferbedingungen und Änderungen im Design vorbehalten. Aufgrund technischer Anforderungen können die Bauteile Gefahrstoffe enthalten. Für weitere Informationen zu gewünschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet.Verpackung
Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nächstgelegene Vertriebsbüro. Wir nehmen das Verpackungsmaterial zurück, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Für Verpackungsmaterial, das unsortiert an uns zurückgeschickt wird oder das wir nicht annehmen müssen, stellen wir Ihnen die anfallenden Kosten in Rechnung.Bauteile, die in lebenserhaltenden Apparaten und
Systemen eingesetzt werden, müssen für diese
Zwecke ausdrücklich zugelassen sein!
Kritische Bauteile* dürfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverständnis von OSRAM OS vorliegt.
*) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder Effektivität dieses Apparates oder Systems beeinträchtigt.**) Lebenserhaltende Apparate oder Systeme sind für (a) die Implantierung in den menschlichen Körper oder (b) für die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist.
2015-12-21 22
Version 1.3 (Replacement in due course) LW L283
Glossary Glossar
1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (acc. to GUM with a coverage factor of k = 3).
1) Helligkeit: Helligkeitswerte werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 8 % und einer erweiterten Messunsicherheit von ± 11 % gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).
2) Reverse Voltage: Not designed for reverse operation. Continuous reverse voltage can cause migration and LED damage.
2) Sperrspannung: Die LED kann nicht in Sperrrichtung betrieben werden. Kontinuierlicher Rückwärtsbetrieb kann Migration und eine Beschädigung der LED zur Folge haben.
3) Chromaticity coordinate groups: Chromaticity coordinates are measured during a current pulse of typically 25 ms, with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (acc. to GUM with a coverage factor of k = 3).
3) Farbortgruppen: Farbkoordinaten werden während eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 0,005 und einer erweiterten Messunsicherheit von ± 0,01 gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).
4) Forward Voltage: The forward voltage is measured during a current pulse of typically 8 ms, with an internal reproducibility of ± 0.05 V and an expanded uncertainty of ± 0.1 V (acc. to GUM with a coverage factor of k = 3).
4) Durchlassspannung: Vorwärtsspannungen werden während eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von ± 0,05 V und einer erweiterten Messunsicherheit von ± 0,1 V gemessen (gemäß GUM mit Erweiterungsfaktor k = 3).
5) Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size >= 5mm² per pad)
5) Wärmewiderstand: RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgröße >= 5mm² je Pad)
6) Thermal Resistance: Rth max is based on statistic values (6σ).
6) Wärmewiderstand: Rth max basiert auf statistischen Werten (6σ).
7) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.
7) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden können. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert.
8) Characteristic curve: In the range where the line of the graph is broken, you must expect higher differences between single LEDs within one packing unit.
8) Kennlinien: Im gestrichelten Bereich der Kennlinien muss mit erhöhten Abweichungen zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden.
9) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and dimensions are specified in mm.
9) Maßtoleranz: Wenn in der Zeichnung nicht anders angegeben, gilt eine Toleranz von ±0,1. Maße werden in mm angegeben.
2015-12-21 23
Version 1.3 (Replacement in due course) LW L283
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.