Upload
borisgolodenko
View
235
Download
1
Embed Size (px)
Citation preview
8/10/2019 Smartfind S10 AIS Beacon Brochure
1/2
www.mcmurdomarine.com
Dealer:
Orolia Ltd. Silver Point, Airport Service Road, Portsmouth. PO3 5PB. United KingdomTel: +44 (0) 23 9262 3900 Fax: +44 (0) 23 9262 3998E-mail: [email protected] www.mcmurdomarine.com
SMARTFIND S10 AIS-BEACON SPECIFICATIONSSTANDARDS APPLIED IEC 61097-14, 60945 (environmental/EMC), 61108 parts
1, ITU-R M.1371
ENVIRONMENTAL buoyantExterior finish Hi impact ABS/PC Translucent opalSealing depth Immersion to 60m (196 ft)Operating temperature -20C to +55C (-4F to +131F)Storage temperature -30C to +70C (-22F to +158F)
BATTERYType 6V Lithium MetalReplacement By service centreUse Logged by microcontroller
OPERATIONActivation Manual two stageSelf test (short) Battery use indicationGPS Self test (long) TEST transmission with GPS position
TRANSPORTATIONAir cargo IATA UN 3091, not restrictedClassification PI970 Section II
ELECTRICALAIS TransmitterFrequency AIS channel 1- 161.975 MHz, AIS channel 2 - 162.025 MHzPower 2W nominalTransmit antenna Integrated PCB
AIS messages transmitted Message 1 (ID, GPS position, SOG,COG,UTC)Message 14 (MOB-ACTIVE or MOB TEST)
ID number Factory programmedGPS receiverGPS type 50 channel
Antenna type Ceramic patchGPS position update Every minute
PHYSICALLength 199mm (7.8)Diameter at widest point 51mm (2.0)
Weight 186g (6.5oz)DeploymentHands free Belt or arm pouch with head band strap includedHand held Wrist lanyard includedSecurity lanyard fixing point
FUNCTIONALFirst transmission After 15 seconds (no GPS)Range 4 nautical miles (typical)Secondary location device Flashing white LED
and status indicator
PART NUMBERSmartfind S10 AIS Beacon retail pack 98-051-001A
Issue 4, April 2012
Please note that all information given in this brochure is intended to be useful and informative and iscorrect to the best of our knowledge at time of print. No liability can be accepted for inaccuracies oromissions. The right is reserved to amend this information without prior notice.
Lifesaving for anyonewho works on or around water
n
Manually activated personal safetydevice to aid recovery of persons indifficulty
nTransmits GPS target trackinginformation over AIS
nUnique serialized ID
nSmall and light for unobtrusive carriage
nWaterproof, buoyant andfully submersible to 60 meters
nFlashing LED lightnMinimum 24 hour continuous operation
n5 year battery storage life
Smartfind S10AIS Beacon
NEW
Smartfind S10AIS Beacon
The Smartfind S10 AIS Beacon is an innovativemanually activated personal safety device whichincorporates both AIS (Automatic IdentificationSystem) and GPS technology. It is designedto aid the speedy recovery of personnel/crewmembers who find themselves in difficulty at sea.
8/10/2019 Smartfind S10 AIS Beacon Brochure
2/2
www.mcmurdomarine.com
nSmartfind S10 AIS Beacon is activated toattract attention.
nAlert is transmitted to all AIS enabledequipment within a 4 mile Radius (typical).
nAIS equipment* displays the alert icon(pictured below).
nPrecise target survivor information includingGPS position becomes viewable when the chartplotter/ECDIS* cursor is positioned over thealert icon.
nThis information provides exact location,distance and bearing to person(s) in need ofassistance.
How Smartfind S10 AIS Beacon works
*For use with AIS enabled chart plotters, contact your chart plotter manufacturer forfurther info.
As AIS SARTs are still very new, not all small-craft chart plotters with AIS show thecorrect SART icon as recommended by the IMO. At the very least, they will showthe same icon as used for other craft normally an arrow. In addition, user settingsgenerally allow you to configure the display to show the MMSI number, which in the S10always begins with 972. This way you can differentiate the S10 from other vessels. If indoubt, check with your plotter manufacturer how they display SARTs on screen.All new ECDIS plotters (on ships over 300 tonnes) will display the SART icon correctly.
What is Smartfind S10 AIS Beacon?
Smartfind S10 AIS Beacon is simple to operate, even ina gloved hand. When the person in trouble has beensuccessfully retrieved from the water, the beacon can beswitched off. A built in test facility indicates whether or notbattery replacement is advised.
Simple to activate
Smartfind S10 is waterproof, buoyant and compact,intended for carriage by divers, crew and anyone whoworks on or carries out activities on the water.
The Smartfind S10 transmits target survivor information,including structured alert messages, GPS positioninformation and a serialised identity number. An inbuilthigh precision GPS receiver provides accurate positioninformation which is frequently updated to assist in quickrecovery of persons in difficulty.
S10 AIS Beacon target information can be viewed usingstandard ships AIS equipment such as Class A and Class Btransponders and a wide selection of receive only AIS units.AIS equipped vessels and land based VTS stations within thelocal vicinity will also have visibility of the AIS-beacon signal.
Whether displayed on the AIS itself or on a companion plotteror ECDIS screen, the unique alert message will clearly indicatethe Smartfind S10s exact location, distance and bearing.
Smartfind S10 is buoyant, waterproof to 60 meters, willtransmit continuously for a minimum of 24 hours and hasa 5 year battery storage life. It also features a flashing
indicator light, giving a localised visual fix and assisting inattracting attention after nightfall.
The Smartfind S10 AIS Beacon is an innovativemanually activated personal safety device whichincorporates both AIS (Automatic IdentificationSystem) and GPS technology.It is designed to aid the speedyrecovery of personnel/crew
members who find themselvesin difficulty at sea.
WATERPROOFAND FULLYSUBMERSIBLETO 60 METERS
*Image shown is Euronav Software
ActivatedSmartfind S10AIS Beacon
AIS equipped vesselfollowing bearingand distance to
target