Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
1www.thermotechnik.hrSMART SOLUTIONS
version: v1.0
user manual - version: 1.0BASIC BASE
2 www.thermotechnik.hrSMART SOLUTIONS
version: v1.0
TABLE OF CONTENTS
GETTING STARTED - INSTALLATION 4
TTO BASIC BASE 5
6
SERVICE NOTES 7
INFO AND SAFETY 3
version: v1.0
WIRIN
3www.thermotechnik.hrSMART SOLUTIONS
version: v1.0
INFO AND SAFETY - BASIC BASE
• Notes on this Technical user manual _This technical information is valid for the Europe Union, 230VAC. User manual is related only to TTO BASIC devices. You will find detailed instructions for hardware and software installation of this package correspoding to page numbers according to table of contents.
• Up to date _In order to ensure correct use of the related product, please check whether an updated version of hardware, technical informations and user manual is avaliable to download from web page https://tto-tech.com
• Safety first _Use the following safety guidelines to help ensure your own personal safety and to Help protect your equipment and working environment from potential damage.
For your own safety and that of others, please read this User Manual, technical informations and the installation of operating operations carefully and completely before commencing installation.Keep the user manual for operating on a safe place and ensure that is always available for service purposes.
If your equipment does not operate normally in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center
• Overview _This User Manual Information presents an overview of the hardware and software features, the functions and the basic operations of the system. The TTO BASIC device must be installed and operated only as described in this User Manual.Any other use is inappropriate and is therefore impermissible.
Keep with standard safety international and national regulationsin this User Manual while installing electrical wirings and equipment.
Only authorised and trained technical persons are permitted configuration and installation of TTO BASIC devices. Working with electrical equipment and wiring may only be performed by authorised and qualified electricians.
To ensure maximum safety, keep your workplace dry and clean.Keep unauthorised persons, children, pets away from electrical wirings, tools and installation location.
• You should know _THIS PRODUCT ARRIVES WITH A LIMITED LICENSE AND IS AUTHORIZED TO BE USED ONLY IN CONNECTION WITH TTO BASIC DEVICE HARDWARE. THIS HARDWARE AND SOFTWARE CANT BE SOLD TO THIRD PARTY.
• Service - installation _Do not attempt to service the equipment yourself, except as explained in your TTO user manual documentation or in instructions otherwise provided to you by TTO. Always follow installation and service instructions closely.
• Which version - hardware and software _You are reading final version of USER MANUAL, using version v1.2 of hardware and software. If you experience any bugs of faulty workflow operations, please contact us to improve user experience and fix bugs.
TURN OFF 230V ELECTRIC POWER LINE BEFORE CONNECTING MAIN BOARD INPUT 230V AND 230V VALVES TO CONNECTORS. FOLLOW ALL SAFETY PROCEDURES AND WEAR PROPER PPE IN ACCORDANCE TO NFPA 70E. DO NOT TOUCH TTO BASIC BOARD OPEN CONNECTORS WHILE RUNNING. FAILURE TO COMPLY CAN RESULT IN SERIOUS INJURY OR DEATH.
• WARNING _Danger to life due to the electrical voltage at the base station!
• BASIC base conformity _TTO BASIC devices are labelled with CE Marking and thus is in the compliance with the engineering and production requirements. Incresed protection are provided for the overall installation with the compliance of which is the responsibility of the qualified installer.
• BASIC base overview _• TTO BASIC configuration is a room-by-room temperature control system with a 10 zones for heating and cooling systems • Maximum connection of 18 actuators and 10 room control units • Thermal valve actuators with the direction NC or NOdepending on the thermostat used • Connection to an external timer• Connection to an external system clock• Connection to pump and water heater, CO signal generator and temperature dew point limiter TB%H.• Standard connection board is 230V and 24V for thermostat and thermal valve actuators• Wiring up to 1.2 mm2
4 www.thermotechnik.hrSMART SOLUTIONS
version: v1.0
GETTING STARTEDWelcome to new TTO BASIC device! Let’s get started.
INSTALLATION IN HEATING CABINETFor hardware installation follow the illustrated steps below.
• Lightly press the clasps on the cover and detach it from housing. Turn base and place RAIL HOLDERS in a predetermined slot on the base housing for installation in cabinet
1 2
• Secure MAGNETIC HOLDERS with RAIL HOLDERS in predeterminated slot on base housing
ALTERNATIVE POSSIBLE INSTALLATION WITH MAGNETIC HOLDERS
5www.thermotechnik.hrSMART SOLUTIONS
version: v1.0
TTO BASIC BASE WARNING 230V AC POWER
CONNECTION: MODEL:B-S-T6/V15 B-S-T10/V18 B-R-T6/V15 B-R-T10/V18 B-PB-T6/V15 B-PB-T10/V18 230V 24V
MAIN INPUT
230V OUTPUT
GROUNDING - PE
PUMP 230V - 6A
WATER HEATER 230V - 6A
TB%H PROTECTION
ACTUATOR CONNECTION
THERMOSTAT CONNECTION
CO CONNECTION
TIMER CONNECTION
SYSTEM CLOCK CONNECTION
LED LIGHTS OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL OPTIONAL
BOARD view:
NUMBER:
1
2
3
4
5
6
7
8
9
10
11
12
PACKAGE PARTS:
1 x
PREINSTALLED FUSE - T4AH (230V) or T2A (24V)
RESERVED FUSE - T4AH (230V) or T2A (24V)
2 x RAIL HOLDERS
2 x MAGNETIC HOLDERS
12345 6 7
8
91011
12
POWER: 230V version 24V VersionMAX. NUMBER OF ACTUATORS 18 pcs. THERMOELECTRIC VALVE DRIVE 18 pcs. THERMOELECTRIC VALVE DRIVE
INPUT POWER max. 50VA max. 50VA
FUSES T4AH T2A
TOTAL POWERNOMINAL APPEARANCE FOR MAX. USAGE NOMINAL APPEARANCE FOR MAX. USAGE
18 valves: max 36W 230V 18 valves: 36W 24V
PUMP and BOILER RELAY 6A 200VA induction
LED SIGNALING
10 pcs. ROOM THERMOSTAT - YELLOW LED LIGHT
-
1 pcs. PUMP / BOILER - GREEN LED LIGHT
1 pcs. POWER INPUT - GREEN LED LIGHT
1 pcs. CO ( COOLING ) - BLUE LED LIGHT
NUMBER OF ZONES 10 10
PUMP / BOILER POWER ON DELAY TIME
2 min / MODELS: B-PB-T6/V15 and B-PB-T10/V18
PUMP / BOILER POWER OFF TIME
2 min/5-15min - DIP SWITCH / MODELS: B-PB-T6/V15 and B-PB-T10/V18
PUMP PROTECTION MODE Every 14 days per 1 minute / MODELS: B-PB-T6/V15 and B-PB-T10/V18
AMBIENT TEMPERATURE 0°C to +50°C
STORAGE TEMPERATURE -20°C to +70°C
ENVIROMENTAL HUMIDITY 80% without condensation
6 www.thermotechnik.hrSMART SOLUTIONS
version: v1.0
230V electric diagram WARNING 230V AC POWER
24V electric diagram
OEM TRANSFORMER
PUMP 230V6A 1100W
OUTSIDE RALEY CONTACT
WATER HEATER230V
230Vinput
PE
L
N
ADDITIONALRELAY
HEATERRELAY
PROCESSOR 24V
PUMPRELAY
24VTHERMOSTAT 1
24VTHERMOSTAT 8
24VOUT-1
24VOUT-8
The voltage supply of the 24V base version must come from the safety OEM TTO transformer230V input cable section for main voltage supply must be 1,5 mm2. 24V inpt cable section for main voltage must be from 1,2mm2 up to 1,5mm2. Follow schematic diagram for proper connection of pump and water heater.
PUMP 230V6A 1100W
OUTSIDE RALEY CONTACT
WATER HEATER230V
230Vinput
PE
L
N
ADDITIONALRELAY
HEATERRELAY
PROCESSOR 24V
PUMPRELAY
230VTHERMOSTAT 1
230VTHERMOSTAT 8
230VOUT-1
230VOUT-8
7www.thermotechnik.hrSMART SOLUTIONS
version: v1.0
SERVICE NOTES
8 www.thermotechnik.hrSMART SOLUTIONS
version: v1.0
SMART HEATING SOLUTIONS
TTO Thermotechnik d.o.o.Lukeži 17, 51218 Dražice, Croatiawww.thermotechnik.hr