LAMP

DIMMABLE

SUITABLE

WET

LOCATION

PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________

NOTES:______________________________________FIXTURE SCHEDULE:_________________________ Page: 1 of 2

PRODUCT DESCRIPTION:

FEATURES AND STANDARDS:

E2 Lighting International, Inc. | Phone: 213-270-1938 | Fax: 213-477-2257 | Web: www.e2lightingusa.com | E-mail: sales@e2lightingusa.com | 2020

Smart Lighting Control 0-10V

＠哱

This smart dimmer can work with all bluetooth devices. You can control lighting even if there is no web. And it can be also connected to your existing home Wi-Fi network easily to provide wireless control and voice commands of your lights with hub or bridge required. You can easily set the ambiance of any room and control your lights from anywhere with Smart Life APP. Whether you're unwinding on the couch, meeting in the boardroom, or vacationing in Hawaii, you'll be able to remotely control and dim your home lighting from anywhere.

• Accept 120‐277VAC, 50/60HZ input;• It outputs 0‐10V signal to loads;• Max loading upto 1000W@120V, 2000W@277V;• Working Temperature: -20 ~ 85 ℃;• App Supported: Smart Life APP;• System Required: iOS 8.0 or higher/Android 4.1 or higher;• When you want to enable timer or make voice commands, aworking gateway and Wifi are needed. Wi-Fi required: 2.4GHz8.0.2.11 b/g/n only, NOT SUPPORT 5G 8.0.2.11ac.

Voice Commands with Alexa and Google Assistant

Set a time schedule to wake up and welcome you back home

Page: 2 of 2

E2 Lighting International, Inc. | Phone: 213-270-1938 | Fax: 213-477-2257 | Web: www.e2lightingusa.com | E-mail: sales@e2lightingusa.com | 2020

Product Number Description

SK-BT1-DD 1000W 120-277V Dimmable 0-10V Smart Lighting Controler

Cert.

ETL, FCC

• NEUTRAL WIRE REQUIRED! As a smart home product, the installation and connection will be morecomplicated than a ordinary dimmer. So reading the following items carefully will be very necessarybefore you placing an order. You also can mail to us for a technical support, and we will respond yousoon.

• INSTALLATION AND WIFI CONNECTION CONDITIONS: Can be connected to 2.4G WiFi(802.11b/g/n)ONLY, NOT Support 5G WiFi(802.11ac). Designed based on the standard box size, fit with 1/2/3/4 gangbox. for use with up to 1000 Watt of DIMMABLE LED/CFL or 1000 Watt of Incandescent bulbs.

• VOICE COMMANDS AND REMOTE CONTROL: This smart dimmer kit paired with the Smart Life Appand works with Alexa or Google Home for a voice commands. You can easily set the ambiance of anyroom and control your lights from anywhere with Smart Life APP. You also can send voice commands tocontrol all the functions of the switch by your Alexa or Google home.

• AUTOMATIC SCHEDULES AND BRIGHTNESS MEMORY: This is also a timer dimmer, would let youeasily set automatic schedules for your lights. When you turn the led dimmer on, it will comes back on atthe same brightness it was when you turned it off. When you enable timer, add a gateway as mentionedabove.

STEP 1: Install the Smart Dimmer Kit

1>Attach the white wire(neutral wire)

from smart dimmer to the group of

white wires (neutral wire) in the

electric box.

2>Attach the black wire(live wire)

from dimmer to the hot wires in the

electric box.

3>Attach the red wire(live load) from

dimmer to the live line of the

lights.

4>Attach the red and white

wire(neutral load) from dimmer to the

neutral line of the lights.

5>Attach the purple wire to the

positive dimming line of the lights.

6>Attach the gray wire to the

negative dimming line of the lights.

STEP 2: Check Wiring and other items(IMPORTANT)

1> Check all wires are connected

rightly.

2> Enable cellphone bluetooth and

WiFi, and ensure router and your

phone are all on the 2.4Ghz channel.

3> Installed the correct App named

"Smart Life - Smart Living" or

"Tuya Smart".

STEP 3: Associate APP With Smart Dimmer and Gateway

1> Login the "Smart Life -Smart

Living" App with your account.

2> Click"+" in the top right

corner of app to add the smart

dimmer.

3> Click "Dimmer" in Electrical

Category.

4> Making dimmer entering

pairing mode by switch on/off

dimmer for 3 times till load

starts blinking.

5> Follow the app instructions

to complete the addition.

6> Connect Gateway to a

5V,500mA(or above) adaptor,

login App.

7> Power on units and wait for

20 seconds(initializing). Make

gateway going into pairing mode

by pressing and holding the

button for 5 seconds.

8> Follow the app instructions

to complete the addition.

STEP 4: Pair with Alexa/Google home

1>Pair with Alexa>click"Skills"> search"Smart Life" app >

click"enable" > Login with your

smart life account (the same

account that you pair with your dimmer) > click "Link now" >

finished.

2>Pair with Google home>"Home

Control" > Click "+" add a

device > search "Smart life" app

> Login with your smart life

account (the same account that

you pair with your dimmer) >

click "Link now" > finished.

How to Install and Connect the E2 Smart Dimmer Kit

Pairing--Associate App With Smart Dimmer (Bluetooth Version----Gateway)

Gateway Connect Gateway to a 5V,500mA(or above) adaptor, login App, enable cell phone bluetooth and Wi‐Fi,

and ensure router is well connected to internet. Power on units and wait for 20 seconds(initializing). Make gateway going into pairing mode by pressing and holding the button(see right pic) for 5 seconds. Red led on gateway starts blinking (being in pairing mode). Tap “+” in main page ‐‐‐> “Bluetooth” (see pic‐1) ‐‐‐>”gateway” (see pic‐1). Follow pic‐2 to pic‐6 to complete gateway pairing and loading

Pic‐1 Main Page Pic‐2 Buetooth devices list Pic‐3 adding devices Pic‐4 Connection in process

Pic‐5 Connection is done Pic‐6 Device is in the list