Small Engine Parts & Accessories UNIVERSAL … · Wheel Bearing Fits Snowblower model: 924. (old style). Carrier shaft bearing. ... and 24” snow attachments; 901011 20” rear tillers

Small Engine Parts & AccessoriesSNOWBLOWER PARTSSNOWBLOWER PARTS

S S

700-380

Pulp Measure / Measuring RodUsed as a snow plow marker. Colour - BRIGHT ORANGE. Measures: 25-1/2” Overall Length,Steel mounting plate has (1) 1/4” X 7/8” Mounting Slot + (1) 1/4” mounting hole. Originally designed for chain saw applications. Fixed under a chainsaw handle, it rapidly gives the length of wood or logs to cut.

430-002 GE# 4414GE# 4161

Headlight / Sealed Beam LampFits many Snowblower applications.12 Volt, 18 Watt. (GE# 4414).Replaces Sears / Craftsman STD374414, found onCraftsman model 768884900 and many other Manufacturers snowthrowers. Replaces older GE# 4161. Size: 4-1/4” OD.(NOTE: Two picture for reference only)

780-630 Universal

Skid Pad SetUniversal Deluxe Poly Skid Pad Set. Includes mounting hardware: (4) 5/16”-18 bolts & lock nuts, (4) 3/8”-16 bolts & lock nuts, (4) washers, (2) adjustable plastic inserts and (2) plastic skid plates. Skids measures: 10” Long X 3-1/2” High X 3/4” Thick.

780-635 Universal

Universal Skid PlateFits on many manufacturers snowblowers. Includes: bolts, nuts and spacers.

295-264 Universal Applications

Wire StopUsed to repair control cables.Size: 1” overall length.3/8” OD steps down to 1/4” OD. (2) wire locking screws.

5-3/4”

1-1/4”2-1/4”

4”


Wire Stop with 1/4” EyeletUsed to repair control cables.Size: 1” overall length. 1/4” ID eyelet.(1) wire locking screw.


Wire Stop with Z-BendUsed to repair control cables.Size: 15/16” overall length with1/8” diameter Z-bend. (1) wire locking screw.

ARIENS continued875-067 72074

07207400Traction Drive Belt Set For 6 Hp Sno-Tro models. Fits models: 922003, 922006,922007, 922007, 922008, 922008,922009, 922010, 922012, 922013, 922014,922015, 922016, 922017, 922018, 922019, 922020, 922021, 922022, 922023, 922024 and 922025.(Priced and Sold as a set of 2 belts). Size: 1/4” W X 27” L

875-069 72023 07202300

Traction Drive Belt SetFits models 1975 thru 1978 andSno-Tro model. Drive belt 4 and5 Hp, 1969 thru 1974 models:922018, 922019, 922021. Size: 1/4” W X 27-3/4” L

875-104 7206607206600

Auger Drive Belt. For 8 thru 12 Hp.Fits models: 924013, 924016, 924018, 924020, 924022, 924023, 924024, 924025, 924026, 924027, 924028, 924029, 924032, 924033, 924034, 924035, 924036, 924038, 924039, 924040, 924042, 924044, 924046, 924048, 924049, 924050, 924051, 924052, 924054, 924071, 924072, 924073, 924074, 924075, 924076, 924077, 924080, 924082, 924083, 924084, 924085, 924086, 924087, 924091, 924092, 924093, 924100, 924101, 924102, 924103, 924104, 924105, 924106, 924107, 924311, 924312, 924313, 924317, 924318, 924319, 924320, 924321, 924322, 924323, 924324, 924325, 924326. Size: 3/8” W X 33-7/8” L

875-098 7204707204700

Auger Drive BeltFor older models with single belt. Fits models: ST624, ST824; ALL 24” and 32”; ST524, ST724, ST732; ALL 29” and 32”. Size: 3/8” W X 35-1/2” L

(Priced and Sold as a set of 2 belts)

(Pkg in lots of 2 belts)(Priced and Sold as a set of 2 belts)

40-01

UNIVERSAL continuedUNIVERSAL


S S

875-080 7205607205600

Auger Drive Belt. Fits models: 922002, 922003, 922006, 922007, 922008, 922009, 922010, 922012, 922014, 922016, 922018, 922019, 922020, 922021, 922022, 922023, 922024 and 922999. Size: 1/2” W X 32” L

875-99036 72001110072001110

Belt, Traction Drive.Fits many Snowblower applications (2003 thru 2009). Ariens: 921001, 02, 03, 04, 05, 06, 07, 08, 09, 010, 300, 301, 302, 303. Raw Edge, Cogged belt. Size: 1/2” W X 34.4” L. (For use with our 877-020 belt set).

875-084 7211407211400

Auger Drive Belt (cogged belt)Fits snowblower models: 924092, 932001, 932004, 932006, 932007, 932016, 932023, 932025, 932030, 932102, 932103, 932310, 932400 and 932500; Size: 1/2” W X 34.9” L

875-907 7200007 07200007

Auger Drive Belt For 932 series. Fits models: 932105 and 932506. (Raw Edge Belt). Size: 1/2” X 34-7/8”

875-906 7200004 07200004

Auger Drive Belt For 924 series. Fits models: 924124, 924125, 924126, 924127, 924335, 924336, 924337 and 924518. (Raw Edge Belt). Size: 1/2” X 35.4”

875-096 7210807210800

Auger Drive Belt. Fits Snowblower models: 924024, 924026, 924028, 924029, 924032, 924036, 924038, 924039, 924042, 924044, 924046, 924048, 924052, 924054, 924081, 924083, 924084, 924086, 924161, 924312 and 924313; 910009, 910010, 910018, 910050, 910051, 910052, 910054, 910072, 910073, 910074, 910083, 910084 and 910086. Size: 1/2” W X 36-1/2” L

875-908 7200020 07200020

Auger Drive Belt For 926 series. Fits models: 926001, 926002, 926004, 926005, 926101, 926102, 926300, 926301, 926304, 926502 thru 926505. (Raw Edge Belt). Size: 1/2” X 37.1”

875-983 7236200 07236200

Auger Drive Belt For 1132 series. Fits models: 924500, 924503 and 924506. (Raw Edge Belt). Size: 1/2” X 37.5”

875-909 7200021Auger Drive Belt For 926 series. Fits models: 926003, 926006, 926103, 926302, 926303, 926500, 926501. (Raw Edge Belt) Size: 1/2” X 38.1”

875-15336 07200514

Drive Belt Set of 2.Fits Ariens snowthrowers.Found on many Deluxe 24,27 and 30 series blowers.Size: 1/2” W X 38-3/4” L (Type 2) Raw Edge belts.

877-020 720043107200431

Blower Belt Set of 2.Fits models: 921001, 921002, 921003, 921004, 921005, 921006, 921007, 921008, 921009, 921010, 921300, 921301, 921302, 921303. Size: 1/2” W X 39-1/2” L. (For use with our 875-99036 traction belt).

875-117 7208607208600

Auger Drive Belt. Fits models: 924027, 924040, 924050, 924051, 924071, 924072, 924073, 924074, 924075, 924076, 924077, 924079, 924080, 924082, 924085, 924087, 924091, 924092, 924093, 924100, 924101, 924102, 924103, 924104, 924105, 924317, 924318, 924319, 924320, 924321, 924322, 924323, 924324, 924325, 924326, 924327, 924328, 924329, 924330, 924500.Size: 1/2” W X 39-1/2” L

875-15335 0720051307200725

Auger Drive Belt.Fits models: Sno-Tekand Ariens Compact self-propelled snow blowers.Size: 1/2” W X 40.69” L. (Type 2- Raw Edge).

More Ariens belts - see “BELTS - OEM EXACT REPLACEMENT” section, PG 05-01

230-038 54136 / 0541360054177 / 05417700

BearingFits model 924 - (New) , (Bearing# 8276-1) Size: 1-1/8” ID X 2-3/16” OD X 5/8” HT

215-214 54093 / 05409300

Wheel BearingFits Snowblower model: 924. (old style). Carrier shaft bearing. (Ariens & John Deere). (Bearing# 8186)Size: 7/8” ID X 1-3/4” OD X 1/2” HT.


(Pkg in lots of 2 belts)

40-02

ARIENS continuedARIENS continued


S S

230-300 54063 / 05406300

Bearing Snowblower input shaft support bearing.Fits snowblower models: ST424, ST524, ST624, ST724, ST732, ST824, ST832, 824, 932 and 1032. Model numbers: 924022, 024, 026, 028, 029, 032, 046, 048, 050, 072, 074, 075 and 079. (Bearing# 1635-2RS and SCO493LU). Size: 3/4” ID X 1-3/4” OD X 1/2” HT

230-003 54039 / 0540390054351 / 05435100

BearingFor 24” and 32” snowblowers. Size: 5/8” ID X 1-3/8” OD X 7/16” HT(Bearing# 99502H).

230-060 54188 / 05418800

BearingFits 93700 series. Size: .669” ID X 1.575” OD X .471” HT(Bearing# 6203-2RS-LG)

230-040 05435200

Bearing - SnowblowerFits snow thrower friction drive. This bearing fits inside housing# 00383000. Fits many Compact Snowblower models. Size: .437” (7/16”) ID X 1.375” OD X .437” HT.(Bearing# 1620-2RS)

230-276 54080 / 05408000BearingDrive support. Fits model: 824. Size: 1/2” ID X 1-3/8” OD X 7/16” HT(Bearing# 1621-2RS)

230-032 54052 / 0540520054160 / 05416000

Bearing Fan bearing.Size: 1” ID X 2” OD X 9/16” HT(Bearing# 1641-2RS)

230-036 54182 / 05418200

BearingFan bearing Dome style bearing.Fits models: 924084, 924085, 924086, 924087, 924091, 924092, 924313, 924314, 924315, 924316. Size: 1” ID X 2” OD X .560” HT(Bearing# 8446RS).

225-334 55110 / 05511000

Bronze Flange BushingFor Sno Thro 932 series blowersSize: 1/2” ID X 3/4” OD X 5/8” HT, Flange OD: 1”

225-839 55035 / 05503500

Bronze BushingAuger shaft. Fits models: 824, 910, 922 and 924. Size: 1” ID X 1-1/8” OD X 5/8” HT, Flange OD: 1-1/2” X 1/8”

225-862 55030 / 05503000

Bronze Bushing Snowblower axles / non-differential, models: 824, 24” & 32” snowblower attachment drive train, 910 and 924 non-differential.Size: 7/8” ID X 1” OD X 5/8” HT, Flange OD: 1-1/4” X 1/8”

225-850 55022 / 05502200

Bronze BushingFits model: 924.Size: 7/8” ID X 1-1/8” OD X 5/8” HTFlange OD: 1-1/2” X 1/8”

225-822 55011 / 0550011155026 / 00550260

Graphite Impregnated BushingTraction / Friction Drive Bushing Fits model: 924.Size: 5/8” ID X 3/4” OD X 1/2” HT, Flange OD: 7/8” X 1/8”

225-826 55122 / 00551220Bronze Bushing Fits on each side of the worm shaft.Size: 1” ID X 1-1/8” OD X 5/8” HTFlange OD: 1-1/2” X 1/8”

225-854 55039 / 05503900

Bronze Flange Bushing. Fits on 6 and 7 Hp Snowblower auger shafts, Fits models: 832 and1032, 20”, 24” and 32” snowblowers.Fits 923001, 923004, 923006, 923014,923017, 923018, 923019, 923020, 923022 and 923023.Size: 3/4” ID X 1” OD X 5/8” HT, Flange OD: 1-1/4”.Note: Can use part# 225-167 > Part# 225-854 is bronze and has a Flange OD: 1-1/4”, part# 225-167 is graphite impregnated and has a 1-1/2” Flange OD

225-847 55036 / 05503600

Plastic BushingNylon flange bushing. Size: 3/8” ID X 1/2” OD X 3/8” HT, Flange OD: 5/8”

225-823 55111 / 05511100

Bronze Flange Bushing. Front worm shaft bushing on Snowblowers. Size: 1/2” ID X 3/4” OD X 3/4” HT, Flange OD: 1” X 1/8”

40-03



S S

225-828 55037 / 05503700

Bronze BushingClutch level bushing.Size: 1/2” ID X 5/8” OD X 5/8” HT, Flange OD: 3/4”

225-851 55150 / 0551500055216 / 05521600

Graphite Impregnated Hexagon Bushing Fits newer Snowblower models: 932026, 932027, 932029, 932302 and 932303. Model ST-524 and ST-724.Size: 3/4” ID X 7/8” OD (Hexagon) X 21/32” HT; Flange: 1-3/16” X 1/8”; 7/8” across the flats.

225-825 55112 / 05511200

Bronze Flange Bushing. Rear worm shaft bushing on Ariens & John Deere Snowblowers. Fits models: 924036, 38, 39, 40, 46, 48, 50, 71, 72 and 924073, also models 832003, 20” and 24” snow attachments; 901011 20” rear tillers. Size: 3/4” ID X 1” OD X 3/4” HT, Flange: 1-1/4”

For more Ariens Bearings / Bushings - see our “BEARING and BUSHINGS”, section 03

240-910 22013 / 02201300

Drive DiscFits Ariens 911000 series.Size: 2-1/4” ID X 4-3/8” OD. (3) mounting holes.

240-900 3003 / 0300300Bolens# 1720859Case# 2289Case# C2289Gilson# 32222Gilson# 18915

Drive DiscFound on many 2 Stage unitsSize: 5-3/8” ID X 6” OD.(Use our 240-325 brake lining if required).

240-100 524002 / 52400200

Pinoin & Sprocket AssemblyFor ARIENS snowblower applications.Bronze Bushings included. Found on924000 series, 910000 SNO THROseries etc. Found on ST424, ST524,ST624, ST724, ST832 etc.Size: 5/8” ID 1-7/16” Pinion OD X9 Tooth Gear ; Sprocket OD: 4-1/2” X 26 Tooth..

780-701 524026 / A

Brass / Bronze worm gear ONLY -shaft not included or offered.Found on many of the following models:924027, 924036, 924038, 924039,924040, 924046, 924048, 924050, 924054,924072, 924080, 924081, 924082, 924093, 924100, 924102, 924104, 924105, 924106, 924107, 924107, 924108, 924109, 924110, 924116, 924118, 924119, 924121, 924311, 924312, 924318, 924319, 924323, 924324, 924325, 924326, 924328, 924550, 924551.Size: 1.88” OD X (Step down collar OD: 1.49”) X1.00” ID X 1.07” overall width.Roll Pin Hole Diameter: 5/16”, 20 Tooth Gear.

280-594 12132 / 01213200

Flat IdlerHeavy duty idler with flange. Fits models: 932000, 924028,924029 and 922003 series; also fitsmodels 924028, 924029, 922003for 20”, 24” and 32” snowblower attachments.Size: 1/2” ID X 2-1/2” OD X 3/4” W.

430-492 07532000

Igntion KeyFits models: ST524, ST724, ST824, ST1024, ST1028, ST1128, ST1332 and ST1336.

780-380 12023 / 01202300Wheel Support RetainerNylon Wheel Retainer. Fits on 20”, 24” and 32” Snowblowers. (For use with our 225-854 and225-862 bushings) Size: 1” ID X 3” L X 2-1/2” W X 31/64” HT. Three 17/64” mounting holes, triangle shape.

780-038 32038

Gear Box GasketFor Ariens Snowblowers.(Made by O.E.M. supplier)

495-061 56061Oil SealFor Ariens Snowblowers.Size: 15/16” ID X 1-9/32” OD X 1/8” HT(Made by O.E.M. supplier)

495-062 56062Oil SealFor Ariens Snowblowers.Size: 3/4” ID X 1-1/2” OD.(Made by O.E.M. supplier)

40-04



S S

780-004 83004Idler SpringFor Ariens Snowblowers.Size: 4-7/8” overall length X 4-1/4” coil length.

780-056 532018

Paddle SetFits 2 + 2 models (8 piece set) Size: 9-5/8” LongX 2-1/2” Wide

(Use with our 780-510 scraper bar).

780-055 53802900

PaddleFits ARIENS models:SS21, SS21E, SS21EC21” snowblowers. Used on ARIENS models: 938030, 938031, 938032, 938033, 938034, 938310, 938313. Fits Path Pro Series. Ariens: SS21, SS21E, SS21EC 21”.Size: 21-3/4” L X 7-3/4 Overall width,(6) mounting holes. (Requires 2 per machine)

780-510 32159 / 3215900 / 037805800

Scraper BarFits 2 + 2 modelSize: 20” L X 2-5/8” W, Mounting holes: 7/8”

780-566 10164 / 01016400 / 01016459

Scraper BarFits 924082,For 24” models. Size: 23-3/4” L X 2” W X 1/4” Thick. (5) Mounting hole: 5/16” square

780-570 03809400

Scraper Bar Fits models: SS522, SS722E and S322.

780-567 22107 / 02210700

Scraper Bar Fits all 20” augers. Size: 19-1/4” L X 1-5/8” W; Mounting hole: 1/4”.

780-136 00396651

Scraper BarFits models: Sno-Tek 20”snowblowers.

Size: 19-3/4” L X 1-3/4” W X .140” Thick.

780-148 00396659

Scraper BarFits models: ST520E, ST624E,ST724E, ST520, ST724, ST5520E,ST7524E and Compact 20” snowblowers.Size: 19-3/4” L X 1-3/4” W X .160” Thick.

780-143 03884351

Scraper BarFits models: Sno-Tek 22” snowblowers.Size: 21-3/4” L X 1-3/4” W X .140” Thick.

780-139 03884459

Scraper BarFits 22” snowblowers.Size: 22-3/4” L X 2” W X .150” Thick.

780-150 0320810003208159

Scraper BarFits 24” models: ST520, ST524,ST624, ST724, ST624E, ST724Eand ST5520E snowblowers.Fits 24” ARIENS ST724 snow blowermodels ending in (037, 039, 505, 508).Size: 23-3/4” L X 1-3/8” W X .140” Thick.

780-146 00271459

Scraper BarFits models: ST520E, ST624E,ST724E, ST5520E, ST7524E,ST8524E, ST5524E, ST724, ST5520,ST7524 and Compact 24” snowblowers. Found on ARIENS models: 920001, 920007, 920010, 920300, 920301, 920302, 932044, 932040, 932041, 932042, 932043, 932311, 932311, 932312, 932509, 932510, 932045, 932046, 932047, 932048, 932140, 932141 Snow Blower.Size: 23-3/4” L X 2” W X .150” Thick.

780-138 00658559

Scraper BarFits models: ST824E, ST1027LE,ST927LE, ST924DLE, ST1130DLE,ST924LET, ST927LET, ST1130LET, Deluxe 24, Deluxe Track 24” and Deluxe Platinum 24” snowblowers.Size: 24” L X 2” W X .150” Thick.

780-145 0026865904182259

Scraper BarFits models: Pro 26” snowblowers.Size: 26” L X 2” W X .150” Thick.


40-05


S S

780-140 00660659

Scraper BarFits models: ST27E, ST824E,ST927LE, ST1027LE, ST924DLE,ST1130DLE, ST924LET, ST824LETST927LET, ST1130LET, Deluxe 27” and Deluxe Track 27”.Size: 27” L X 2” W X .150” Thick.

780-131 04145959

Scraper BarFits models: Deluxe Track 28”snowblowers.Size: 27-1/2” L X 2” W X .160” Thick.

780-144 04145451

Scraper BarFits 28” models:Sno-Tek 28” snowblowers.Size: 27-3/4” L X 1-3/4” W X .140” Thick.

780-134 0247910002479159

Scraper BarFits models: ST1024, ST1028,ST1332, ST1336, ST1128LE,ST1124DLE, ST1128DLE,ST1332DLE, ST1336DLE and ST8524DLE snowblowers.Size: 27-3/4” L X 2” W X .160” Thick.

780-130 04182159

Scraper BarFits models:Pro 28” snowblowers, Pro 28 Track snowblowers, Hydro Pro 28 DLE and Hydro Pro 28 DLE Track snowblowers.Size: 28” L X 2” W X .150” Thick.

780-133 00620159

Scraper BarFits models:ST824SLE, ST1028SLE, ST824DLE, ST928LE, ST1132LE, ST1028, ST1024, ST8524DLE, ST1128LE, ST1124DLE, ST1336LE, ST1332 & ST1336 snowblowers.Size: 28” L X 2” W X .150” Thick.

780-141 00661159

Scraper BarFits 30” models:ST824E, ST1027LE, ST1130DLE, ST924DLE, ST927LE, ST924LET, ST927LET, ST1130LET snowblowers, Deluxe 30” snowblowers, Deluxe Track 30” snowblowers and Deluxe Platinum 30” snowblowers.Size: 30” L X 2” W X .150” Thick

780-151 04182059

Scraper BarFits models:Pro 32” snowblowers, Pro 32 Tracksnowblowers and Hydro Pro 32 DLE snowblowers.Size: 32” L X 2” W X .150” Thick.

780-132 00620859

Scraper BarFits 32” models:ST824SLE, ST1028SLE, ST824DLE, ST928LE, ST1132LE, ST1028, ST1024, ST1128LE, ST1124DLE, ST1332, ST1336 snowblower and SB936 snow brush. Size: 32” L X 2” W X .160” Thick.

780-142 02437300

Scraper BarFits 32” models:ST524, ST724, ST824, ST824S, ST828,ST832, ST1032, ST1136, ST1236 and TT8 snowblowers. Size: 32-1/2” L X 2-1/4” W X .160” Thick.

780-147 0351920003519259

Scraper BarFits models:ST824SLE, ST1028SLE,ST824DLE, ST928LE, ST1132LE, ST1028, ST1024, ST8524DLE, ST1128LE, ST1124DLE, ST1336LE snowblowers and SB936 snow brush. Fits 36” Ariens Snowblowers 924333, 924334, 924502, 924503, 924505, 924506, 924508, Ariens Electric Snowblowers 924500, 924505, 924506, 924508, 924551 and many more.Size: 36” L X 2” W X .150” Thick.

780-149 04181659

Scraper BarFits models:Pro 36” snowblowersand Hydro Pro 36 DLE snowblowers.Fits ARIENS 926 Series Pro 36, Pro 36 Ce, Hydro Pro 36DLE and Hydro Pro 36DLE CE Snow Throwers.Size: 36” L X 2” W X .160” Thick.

780-221 532005053200500

Shear Bolts Fits models: ST524, ST624, ST724, ST824 and ST520Size: 1-7/16” L X 1/4”-20 threads.

780-213 510016051001600342449

Shear Bolts Size: 1-5/8” L X 1/4”-20 threads

(Priced individually)(Sold in multiples of 10)


ARIENS continued ARIENS continued

40-06


S S

780-205 510015051001500

Shear BoltsFits models: ST420, ST520,ST524, ST624, ST824, ST832 & ST924; Size: 2” L X 5/16”-18 threads. The two shear bolt grooves Center to center: 15/16”.

780-200 52001052100100

Shear Bolt For snowblowers. Fits new 2007 model series 921001, 921002 and 921003 that take the NEW black shear bolt. The two shear bolt grooves Center to center: 1”. The groove closer to the bolt head is 1/8” CC from the underside of bolt head; 1/2” wrench size. Size: 2” L X 5/16”-18 threads.

780-270 1016501016500

Skid Plate Fits Ariens Snowblowers. Size: 5-1/4” L X 3-1/4” W X 7/8” HT, (2) 7/16” X 2” mounting slots on 3” Centres.

780-290 2459902459900

Skid PlateFits Ariens Snowblowers. Fits models: 924080 and 924082 with 24” auger. 1960 to present Size: 5-3/4” L X 3” W X 15/16” HT, (2) 7/16” X 2” mounting slots, 3” Centres.

780-300 0248385102483859

Skid PlateDouble sided, reversible runner. Fits Ariens Snowblowers from 60’s to present. Fits models924080 and 924082 with 24” auger, (Orange in colour) Size: 5-3/4” L X 3-5/8” W X 1-1/16” HT, (2) 7/16” X 1-3/4” mounting slots, 3” Centres

780-292 04431751

Skid PlateFits models: Sno-Tek 20”,22”, 24” and 28” snowblowers.Found on models: 920313, 920314,920315, 920402 and 920403 Sno-Tek.Size: 9-1/4” L X 3-5/8” W X .180” Thick.Slot size 7/16” x 2-3/8”


(Sold in multiples of 5)

780-294 0244940003075559

Skid PlateFits models: SB936LE, ST824,ST924, ST924E, ST928, ST936LE,ST1024, ST1028, ST1032, ST1128LE,ST1132LE, ST1228, ST1228E,ST1232, ST1232E, ST1236, ST1236E,ST1336LE and ST1336LE snowblowers and others.Size: 5-1/2” L X 4-3/4” W X .180” Thick.

290-328 69032

Throttle ControlFits Snowblower models: 10954, 10962, 10965,10969 and 10970.Negative action “F” to “S”,bracket for side mounting. Conduit Length: 27-1/8”,Inner wire length: 29”, Wire travel: 1-3/4”

290-112 69080 / 06908000

Throttle ControlFound on Ariens,Murray / Noma snowblowers. Conduit length: 30-1/4”, Inner wire length: 33”, Conduit size: 3/16”, Inner wire size: .055”, Wire travel: 1-3/4”.

285-486 06900019

Chute blower control cable For Ariens snowblowers. Fits models: 921002 / 003 / 004 / 301, 926001 / 002 / 003 / 004 / 005 / 006 / 007 / 008 / 009 / 010 / 011 / 012 / 013 / 014 / 015 / 016 / 017 / 021 / 022 / 023 / 101/ 102 / 103 / 300 / 301 / 302 / 303 / 304 / 305 etc. Measures: 54” Overall Length, Wire Travel: 2”, Both Ball Ends: 1/4” diameter.

285-484 06900012

Clutch blower control cable For Ariens snowblowers. Fits models: 926001 / 002 / 003 / 004 / 005 / 006 / 007 /008 / 009 / 010 / 011 / 012 / 013 / 014 / 015 / 016 / 017 / 021 / 022 / 023 / 024 / 025 / 026 / 027 / 101 / 102 / 103 / 300 / 301 / 302 / 303 / 304 / 305 / 306 / 307 / 308 / 310 / 311 / 312 / 313 / 314 / 315 / 316 / 500 / 501 / 502 / 504. Overall Adjustable Length: 25-1/4 to 26”, Coil Length: 4-1/4”, Eyelet hole ID: 1/4”.

40-07

ARIENS continued ARIENS continued


S S

285-485 06900018

Chute control cable For Ariens snowblowers. Fits models: 921001 / 002 / 003 / 004, 921300 and 921301, 926016 / 017 / 021 / 022 / 023 / 302 / 310 / 311 / 312 / 313 / 314 / 315 / 316 / 500 / 501 etc. Measures: 61-3/8” Overall Length, Wire Travel: 5-3/8”, Eyelet hole ID: 1/4”.

285-483 06900011

Traction control cable For Ariens snowblowers. Fits models: 926001 / 002 / 003 / 004 / 005 / 006 / 007 / 008 / 009 / 010 / 011 / 012 / 013 / 014 / 015 / 016 / 017 / 021 / 022 / 023 / 024 / 025 / 026 / 027 / 101 / 102 / 103 / 300 / 301 / 302 / 303 / 304 / 305 / 306 / 307 / 308 / 310 / 311 / 312 / 313 / 314 / 315 / 316 / 500 / 501 / 502 / 504. Overall Adjustable Length: 38-1/2” to 39-1/4”, Coil Length: 4-1/4” (Adjustable end), Coil Length: 4-5/8” (fi xed end).

AYP / HUSQVARNA225-003 174686

407758532-174686

Bronze Hexagon bushing.Found on AYP / HUSQVARNAsnowblowers. Found on models:P10530ESA (2002), P524ESA (2002),P8527ESA (2002), PO10527ESA (2004),PO8527ESA (2004), PP10527ESA (2003),PP1130ESA (2002), PP1130ESB (2003), PP1130ESC (2004), PP524A (2003), PP524B (2004), PP5524ESA (2002), PP5524ESB (2003), PP5524ESC (2004), PP8527ESA (2003), PP8527ESB (2003), PP927ESA (2002), PP927ESB (2003), PP927ESC (2004), PR10527ESA (2004), PR524ESA (2004), PR8527ESA (2003), PR8527ESB (2004).

Size: 5/8” ID X .942” OD (Hexagon) X 3/4” HTwith fl ange; Flange OD: 1-1/8”; 7/8” across the fl ats.(For 3/4” ID bushing - See our 225-002)

225-002 174700407769532-407769

Bronze Hexagon bushing.Found on AYP / HUSQVARNAsnowblowers. Found on models:P10530ESA (2002), P524ESA (2002),P8527ESA (2002), PO10527ESA (2004),PO8527ESA (2004), PP10527ESA (2003),PP1130ESA (2002), PP1130ESB (2003),PP1130ESC (2004), PP524A (2003), PP524B (2004), PP5524ESA (2002), PP5524ESB (2003), PP5524ESC (2004), PP8527ESA (2003), PP8527ESB (2003), PP927ESA (2002), PP927ESB (2003), PP927ESC (2004), PR10527ESA (2004), PR524ESA (2004), PR8527ESA (2003), PR8527ESB (2004).Size: 3/4” ID X .942” OD (Hexagon) X 3/4” HTwith fl ange; Flange OD: 1-1/8”; 7/8” across the fl ats.(For 5/8” ID bushing - See our 225-003)

225-001 174701532-174701

Bronze Hexagon bushing.Found on AYP / HUSQVARNAsnowblowers. Found on models:P10530ESA (2002),P524ESA (2002), P8527ESA (2002),PO10527ESA (2004), PO8527ESA (2004),PP10527ESA (2003), PP1130ESA (2002), PP1130ESB (2003), PP1130ESC (2004), PP524A (2003), PP524B (2004), PP5524ESA (2002), PP5524ESB (2003), PP5524ESC (2004), PP8527ESA (2003), PP8527ESB (2003), PP927ESA (2002), PP927ESB (2003), PP927ESC (2004), PR10527ESA (2004), PR524ESA (2004), PR8527ESA (2003), PR8527ESB (2004).Size: 1” ID X 1.33” OD (Hexagon) X 13/16” HT with fl ange; Flange OD: 2”; 1-1/4” across the fl ats.NOTE: These bushing fi t into the AYP / Husqvarna#’s (427302 / 532-427302 LEFT) and (427317 / 532-427317 RIGHT) aluminum covers.

780-400 179830532 17 98-30

Axle Bearing SupportFor AYP / Husqvarna / Poulan,Sears / Craftsman and severalother manufacturers snowblowers.Size: 3-11/16” overall length X 1-9/16” Wide. (2) .336” OD holes on 3” centers. ID: 1” X 13/16” overall height.

230-051 180017532 18 00-17

Bearing with Cage AssemblyFor AYP / Husqvarna / Poulan,Sears / Craftsman and severalother manufacturers snowblowers.Size: 3-11/16” Overall Length X 1-11/16” Wide.(2) 5/16” ID holes on 3” Centers.Bearing ID: 12mm ID (0.472”), (Bearing# 6201RS).Uses our 230-621 replacement bearing..

40-08

ARIENS continued AYP / HUSQVARNA cont.


S S

230-054 175323 532 17 53-23

Bearing with cage assembly For Snowblowers. Fits many manufacturers snowblowers> AYP, Craftsman, Husqvarna and Poulan etc.Bearing ID: .669” ID. Cage measures: 3-5/8” L X 2-5/8” W; Bolt holes are on 2-7/8” centres. (Uses our 230-060 replacement bearing)

780-402 175344532 17 53-44

Trunion Bearing Support Found on AYP / Poulan /Husqvarna, Sears / Craftsmanand other manufactures snowblowers.Size: 4” overall length X 2-7/8” Wide X 1.378” ID.(Bearing# 6007-2 RS).

230-053 187925 / 532 18 79-25

Auger shaft bearing with cage assembly For Snowblowers.Fits many manufacturers snowblowersAYP, Craftsman, Husqvarna and Poulan etc. Bearing center ID: .750” with a 1/4” roll pin inserted. Cage measures: 3-5/8” L X 2” W X 1-5/8” overall height; (2) 5/16” diameter mounting bolt holes on 2-7/8” centres.

230-500 427762 / 532 42 77-62430691 / 532 43 06-91

Auger Flange Bearing Shaft Auger Flange Bearing Shaft.Found on AYP, Craftsman, Husqvarna,Poulan, Roper, Sears and severalother manufacturers snowblowers.Size: 3-1/8” overall length.1” OD shaft (squared on one side)with a 3/8” ID hole. Shaft length: 2-1/2”.Mounting holes are on 2-3/4” centers.

417-238 174699 / 407768

O-RingFits AYP / Husqvarna / Poulan, Sears / Craftsmanand several other manufacturers snowblowers.Size: 3/4” ID X 1” OD X .139” Thick

780-710 155574 / 174659407763 / 532 40 77-63

Auger Worm Gear “ONLY” -Made of Brass / Bronze material.

NOTE: The OEM sources are no longerselling this worm gear separately, theyoffer a Gearbox Assembly (AYP# 427148 / 532427148). In most cases the gear is the part that fails. Fits on many AYP / Husqvarna / Poulan, Sears / Craftsman snowblowers.

Size: 3-1/8” OD X 1” ID X 7/8” overall width. Gear Width: 3/4”. Woodruff Key: 1/4”, 41 Tooth Gear.

875-14513 428454 / 532 42 84-54

Traction Drive belt. Fits models: 1827 EXLT, 1830 EXLT 96193007800 (2007 thru 2011) and others. Size: 1/2” Wide X 29.4” Long. (Covered - Type 1).

875-99036 179092 / 532 17 90-90416954 / 532 41 69-54

Traction Drive belt.Fits many Snowblowerapplications (2003 thru 2009). AYP, Husqvarna and Sears. Found on the following AYP / Husqvarna snowblower models: 1027, 10527, 10530, 1130, 5224, 524, 5524, 8024, 8524, 8527, 9027, 924, 927, 9527 etc. Fits Sears model DR524 etc. Raw Edge, Cogged belt. Size: 1/2” W X 34.3” L

875-99031 40790883691532 40 79-08583 30 51-01

Traction Drive belt.Found on Craftsman snowblower models: 917881052, 917881053, 917881051, 917881152, 917881050.Size: 1/2” W X 34-1/4” L. (Raw Edge, Cogged belt).

875-0598 532 41 35-92

Auger Drive belt.Fits AYP / Craftsman / Husqvarna. Fits HUSQVARNA models: ST327P and ST330P snowblowers .Size: 1/2” W X 35-3/4” L. (Covered - Type 1).

875-0594 585 82 99-01585 82 99-02

Impeller Drive belt.Fits AYP / Craftsman / Husqvarna. Fits HUSQVARNA models: ST230P snowblowers, (2004 thru 2016).Size: 1/2” W X 41” L. (Raw Edge - Type 2).

875-14117 183533 / 532 18 35-33408010 / 532 40 80-10

Belt, Impeller Drive / Auger Drive For AYP / Husqvarnaand Sears snowblowers.Found on the followingAYP / Husqvarna snowblowermodels: 1027 STE (2003 - 07),10527 SB, 10527 SBE and STE (2003 - 07), 10530 STE / SBE & SBEB (2005 -06), 1130 SBE / STE (2002 -09), 524 S (2006), 524 STE(2004 -08), 5524 STE / SE / SEB (2005 on), 8024 ST (2002 -09), 8024 STE (2004 -08), 924 STE, 924 SBE (2006 -08), 924 SB, 924 SBE, 927 SB, 9027 STE XP (2004 -07) and HL 1027 (2004 -09). Raw Edge Belt.Size: 5/8” Wide X 37-1/2” Long .(Replaces our old# 875-99090).

40-09

AYP / HUSQVARNA cont. AYP / HUSQVARNA cont.


S S

875-14512 408019 / 532 40 80-19

Belt for - IMPELLER. Fits models: 1130 SBE OV,11524E 6193007400, 14527E,145270 (2006 thru 2011) and others. Raw Edge Belt. Size: 5/8” Wide X 38.8” Long X 5/16” Depth. (Commonly used with our 875-99036 Traction Drive belt).

285-560 428311 / 532 42 83-11

Chute Control Cable For AYP / Craftsman / Husqvarna / Sears snowblowers. Models 2009 on. Measures: 45-3/4” Overall Length, Conduit Length: 31-3/4”, Wire Travel: 11-3/4”. (Includes a heat resistant conduit cover = 14” long approximately)

285-562 428274 / 532 42 82-74

Chute Control Cable For AYP / Craftsman / Husqvarna / Sears snowblowers. Models 2009 on. Measures: 46-1/2” Overall Length, Conduit Length: 32-7/8”, Wire Travel Adjustable: 11” thru 11-3/4”.

285-564 178674 / 532 17 86-74198475 / 421164

Chute Control Cable For AYP / Craftsman / Husqvarna / Sears snowblowers. Cable only. Measures: 59-1/4” Overall Length, Conduit Length: 50-3/4”, Inner Wire Length: 57-1/2”, Wire Travel: 3”, Eyelet hole ID: 5/16” with a Cast Z-Bend on the other.

240-950 179831 / 532 17 98-31440620 / 532 44 06-20

Drive RingFits many AYP / Husqvarna snowblowers built from 2002 on.

Measures: 4-1/2” OD X 3-5/8” ID X 1/2” Width.

780-088 53688547

Scraper Bar Fits John Deere model: TRS21;also found on AYP / Husqvarna, Noma & Sears equipment.Size: 20-15/16” longwith (4) 5/16” ID mounting holes on 6-3/4” centres.(Use with 780-118 paddle set)

780-090 532 40 49-31 / 532 41 62-15 /404931X479

Scraper BarFits models: 924HV, 924SB,11524E and ST261E snowblowers.Size: 23-9/16” long X 1-3/4” Wide with (5) mounting holes on 5-5/16” centres. Thickness: .130”

780-091 532 40 49-32 / 532 40 77-27

Scraper BarFits models: 927SBE and 8527SBEB snowblowers.Size: 26-1/2” long X 1-3/4” Wide with (5) mounting holes on 6” centres. Thickness: .135”

780-241 714001506 71 40-01531 00 25-13

Shear BoltsFits 2004 models:PO10527SA, PO8527ESA, PP1130ESC, PP524B, PP5524ESC,PP997ESC, PR10527ESA, PR524ESA and PR8527ESB. Size: 1-15/16” (49mm) L X 6 mm thread, 12mm shoulder. (Also see Noma shear bolts)

780-320 174762

Skid Plate / Skid Pad For AYP / Husqvarna / Poulan built snowblowers. (LEFT side). Size: 4-1/4” Long X 3” HighX 7/8” Bottom Plate Width. (2) 5/16” X 2-3/8” mounting slots on 3/4” centers.

780-322 178777

Skid Plate / Skid Pad For AYP / Husqvarna / Poulan built snowblowers. (RIGHT side). Size: 4-1/4” Long X 3” HighX 7/8” Bottom Plate Width. (2) 5/16” X 2-3/8” mounting slots on 3/4” centers.

40-10

AYP / HUSQVARNA cont. AYP / HUSQVARNA cont.


S S

780-234 532 40 78-34532 43 57-85

Skid PlateFor snowblower models: 924,1130, 1330SB, 1650EXL, 1827,1830, 1830SB, 10527SB, 11524E,12530HV, 14527E, 15530, 16530, 1830SB,ST2109E, ST261E and ST268EP snow throwers.Size: 5-3/4” L X 4-3/8” W X 15/16” HT;(2) 5/16” W X 2” L mounting slot on 2-1/2” centres.

790-100 197764 / 532 19 77-64

Hex ShaftFor AYP / Husqvarna/ Poulan, Sears / Craftsman etc.Found on Husqvarna models:10527, 10530, 1130, 11524, 12524, 1330SB, 14527, 15530, 1827, 1830,5224, 8527, 924, ST261, ST276 etc.Size: 3-1/4” overall Length. Across the fl ats: 3/4”.Large OD: .675” X 1.00”, Smaller OD: .630” X 1.00”. Woodruff Key slot: 3/16” X 1.00”.

780-520 427147 / 532 42 71-47

Impeller Shaft / Impeller Worm Shaft Found on AYP / Husqvarna / Poulan, Sears / Craftman, Troy Bilt and others snowblowers. Found on many of the following Husqvarna models: 1827EXLT, 1830EXL, 11525E, 12527HV, 14527E, 145270, 924H, 1650EXL, 1830EXLT, 17830HV, 5524ST, 11524E, 12530HV, 16527EXLT, ST268EP, ST276EP, ST230E, 15530SB, 1830SB, PSB240, PSB270, ST2106 etc.Measures: 16” Overall Length X 3/4” diameter.

BRIGGS & STRATTON285-589 1502113MA

Drive Control Cable For Murray / Briggs and Stratton snowblowers. FR-DR P7 5-13B. Measures: 31-1/4” Overall Length, Cast Z-Bends on both ends.

287-001 761131 / 761131MA

Chute control cable For Murray / Briggs and Stratton snowblowers. Measures: 69-1/2” Overall Length, Conduit Length: 62”, Wire Travel: 5-1/4”, Eyelet hole ID: 5/16”.

287-002 761775 / 761775MA

Chute control cable For Murray / Briggs and Stratton snowblowers. Measures: 63-3/4” Overall Length, Conduit Length: 57-1/2”, Wire Travel: 3-1/4”, Eyelet hole ID: 5/16” with a Cast Z-Bend on the other.

120-213 494769 / 697944 / 698181

In Line Fuel Shut-off Fits 3-1/2 and 5 Hp, Industrial Plus models. Used on many snowblower applications. Fits 1/4” ID fuel line, 90 degree valve. (Composite material)

120-212 493960 / 494768 / 698183

In Line Fuel Shut-off Fits 1/4” ID fuel line. Red knob opens and closes easily with a quarter turn. (Composite material)

140-103 398101 / 695740 699334 John Deere# PT10615 Noma# 315542

Starter Handle “D” style mitten grip handle. Used on many snowblowers with pull starters.

780-264 703063Murray# 703063

Shear Pins.Fits MURRAY / SIMPLICITY: 42” and 46” single-stage snowblowers; and 26”, 28” and 30” dual stage snowblowers. Fits SNAPPER: 42” and 46” snowblowers. Size: 1-7/8” L X 1/4” diameter. Zinc Plated Steel.

CUB CADET - see MTDHONDA230-274 96150-62030-10Bearing with RetainerTransmission input shaft bearing withretainer ring. Snowblower fan bearing formodels: HS624 & HS828. (Bearing# 6203-2RS / 6203-2Z)Size: 17mm ID X 40mm OD X 12mm HT or .669” ID X 1.574” OD X .471” HT.

230-060 96150-62030-10Bearing Transmission input shaft bearing For models: HS624 and HS828. (Bearing# 6203-2RS / 6203-2Z)Size: 17mm ID X 40mm OD X12mm HT or .669” ID X 1.574” OD X .471” HT.


40-11

AYP / HUSQVARNA cont. BRIGGS & STRATTON


S S

230-134 0876904 96140-60020-10 96150-60020-10

Bearing Snowblower friction disc plate bearing. Fits Honda models: HS50, HS70 and HS80. Wheel bearing on most commercial mowers. (Bearing# 6002-2RS)Size: 15 mm ID X 32mm OD X 9mm HT

230-140 96150-60040-10BearingAuger / Crawler and Transmission. Fits models: HS50, HS55, HS70, HS80, HS624 and HS828. (Bearing# 6004-2RS)Size: 20 mm ID X 42 mm OD X 12 mm HT

780-031 72521-730-003 / 72552-730-0031003375 (4 ea.) / 1003391 (4 ea.)

Paddle SetHonda Snowblower (8 piece set). Fits model:HS35. Rectanglemeasurement: 4-3/4” X1-7/8” X Crescent measurements: 9-5/8” X 2-3/16”

780-048 06720-V10-030Code# 6672448Code# 6813166

Paddle SetFits model: HS520 Snowblower. (6) piece set

780-032 72521-747-000 72522-747-000 / 72523-747-000

Paddle SetHonda Snowblower(6 piece set). Fits models:521 and 621.

Replaces Honda 72523-747-000 (1) pcs. &72522-747-000 (2) pcs. & 72521-747-000 (3) pcs.

780-180 76322-747-A10Code# 3526985

Scraper Bar Fits models: HS521 and HS621 Snowblower. Size: 19-5/8” L X 2-7/8” W Mounting holes: 1-3/16”

780-049 76322-V10-010Code# 6672448

Scraper BarFits model: HS520 Snowblower. Size: 19-3/8” L X 2-1/2” W; Mounting holes: 5/16”

780-311 76153-743-610 76153 743-611

Skid PlateFits snowblower models: HS522,HS622, HS828,HS1132 and HS624.Size: 3-1/8” Overall length X5” Overall Height,(1) 8mm slot X 90mm Long Centered.

780-310 187862876153-736-00076153-736-010

Skid PlateFits snowblower models:HS50, HS55, HS55K1, HS55K2, HS70, HS80, HS80K1 and 724. Size: 135mm / 5-3/8” OL X 68mm / 2-3/4” HT, (2) 9mm slots X 52mm L on 60mm / 2-3/8” centers.

780-257 90102-732-010 (bolt)90114-SA0-00 (nut)Code# 1410182 / 1533355

Shear BoltsHonda# 90102-732-010 (bolt), 90114-SA0-000 (nut). Also fits Yamaha SnowblowersSize: 1-15/16” (49mm) L X 6 mm thread, 10mm shoulder.

HUSQVARNA - see AYPJACOBSEN240-900 158458

990152Drive Disc Our most popular selling drive disc. Found on many different manufacturers equipment. Size: 5-3/8” ID X 6” OD.(Use our 240-325 brake lining if required).

240-910Drive DiscFound on snowblowers. Size: 2-1/4” ID X 4-3/8” OD;(3) mounting holes.

JOHN DEERE230-276 AM122108

BearingFits models: 524D, 724D, 826D, 828D and 1032D.Size: 1/2” ID X 1-3/8” OD X 7/16” HT (Bearing# 1621-2RS)

40-12

HONDA continued HONDA continued


S S

230-038 AM122105

Axle bearing Fits Snowblower model: 924. (new style) (Bearing# 8276-1)Size: 1-1/8” ID X 2-3/16” OD X 5/8” HT.

230-300 AM122158

Input Shaft Bearing. Fits models: 524D, 724D, 826D and 1032 walk behinds and snowblowers.(Bearing# 1635-2RS and SCO493LU)Size: 3/4” ID X 1-3/4” OD X 1/2” HT

225-334 M127164

Bronze Flange BushingUsed on many impeller shafts found on Snowblowers. Size: 1/2” ID X 3/4” OD X 5/8” HT, Flange OD: 1”.

225-839 M124417

Bronze BushingFits models: 828D, 924DE, 1032D, 1128DE and 1332DE. walk behind snowblowers.Size: 1” ID X 1-1/8” OD X 5/8” HT

225-854 M127082

Bronze BushingFits models: 524D, 724D (PC2569)and 826D (PC2570). (Bushing# 8276-1)Size: 3/4” ID X 1” OD X 5/8” HT

225-825 M127538

Bronze BushingRear worm shaft bushing. Fits models: 924036, 924038, 924039, 924040,924046, 924048, 924050, 924071, 924072 and 924073. Size: 3/4” ID X 1” OD X 3/4” HT

780-580 AM119482Murray# 579726 Murray# 579726MANoma# 579726Noma# 579726MA

Impeller Bearing Housing only For John Deere, Murray / Noma snowblowers. Found on John Deere snowblower model 826 etc. (Made of Aluminum). Size: 1-1/4” ID X 7/8” Overall Height. (3) 5/16” Mounting holes on2.35” centers. Two pictures for reference(Uses our 225-677 Bronze Bushing in many applications).

240-925 AM38356M114485

Drive DiscFor older Snowblowers.Size: 7/16” ID X 6” OD

240-910 AM123355

Drive Disc For John Deere manufactured Snowblowers.

Size: 2-1/4” ID X 4-3/8” OD, (3) bolt holes.

240-900 AM122115 AM123355 Bolens# 1720859Case# 2289 Case# C2289Gilson# 32222Gilson# 18915

Drive DiscFound on many newer snowblowersUse with our 240-325 brake liner. See our “DRIVE, RIDER and PUSH MOWER PARTS” section. Size: 5-3/8” ID X 6” OD.

120-430 AM116304 GY20709

Universal In-Line Fuel Filter - 80 micron. Dual hose barbs that fit both 1/4” and 5/16” ID hose. Features a new high impact polymer-copolymer blendthat will stand up to all standard andbio-based fuels including E85. Size: 3-5/8” overall length.

120-212 AM107340 AM107922

In Line Fuel Shut-off Fits 1/4” ID fuel line. Red knob opens and loses easily with a quarter turn. (Composite material)

120-214 AM36141

In Line Fuel Shut-off Fits 1/4” ID fuel line(Metal)

40-13

JOHN DEERE continued JOHN DEERE continued


S S

780-118 M94576 (4 pcs.) / M94574 (2 pcs.)Noma# 302565 (4 pcs.) / 57121 (2 pcs.)

Paddle Set For model: TRS21 (6 piece set) Rectangle measurements: 1-3/4” X 3-3/4” (3) mounting holes on 2-3/4” centres. Crescent measurements: 11” X 2-5/16”(Use with our 780-088 scraper bar)

780-088 M94511

Scraper Bar Fits model: TRS21. Size: 20-15/16” long with (4) 5/16” ID mounting holes on 6-3/4” centres. (Use with 780-118 paddle set)

780-221 AM123342

Shear BoltsFits models: 524D, 724D, 826D and 1332DDE. Size: 1-7/16” L X 1/4”-20 threads.

780-205 AM122156AM136890

Shear Bolts Fits models: 828D, 924D, 1032D, 1128DDE, 1128DE and 1332DDE. Size: 2” L X 5/16”-18 threads. The two shear bolt grooves Center to center: 15/16”

780-290 M124413M144012

Skid PadFits models: 524D, 724D, 826D, 828D, 924D, 1032D, 1128DDE and 1332DDE. Size: 7/16” X 2” slots, 3” center to center. Size: 5-3/4” L X 3” W X 15/16” HT. (For double sided skid plate see our 780-300)

780-300 M124413M144012

Skid Pad Double sided, reversible runner Size: 5-3/4” L X 3-5/8” W X 1-1/16” HT,(2) 7/16” X 1-3/4” mounting slots on 3” Centres.

LAWN BOY240-900 741316

Drive DiscFound on many Ariens 2 Stage unitsSize: 5-3/8” ID X 6” OD.(Use our 240-325 brake lining if required).



780-064 610206 / 700371 / 700504Gilson# 207527 / 207141

Paddle Set Snowblower (6 piece set) Fits models: 55190, 55185,55131, 55203 and 55312. Rectangle

Size: 1-1/2” X 7-1/2” (3) mounting holes on 2-7/8” centres. Crescent measurements” 2” X 9.308” (Use with our 780-179 scaper bar)

780-179 700321 / 610191Gilson# 201879

Scraper BarFits Snow Cannon model. Measures: 20” long with (3) mounting holes on 9-11/16” centres. Mounting holes are slotted .220” X .365” (Use with our 780-064 paddle set)

MTD - CUB CADET / TROY BILT

875-99010 754-04088

Drive BeltFits many 2 stage MTD snowblower snow thrower applications. (2006 and newer). (2L 330). Size: 1/4” W X 33” L (Raw Edge Belt)

875-3809 754-04013954-04013

Traction Drive belt.Fits MTD 300 series compact frame snowblowers, (5 Hp - 22”; 2002 >). Size: 3/8” W X 21.2” L. (Raw Edge Belt)

875-3810 954-04014754-04014

Auger Drive Belt Fits 300 series compact frame snowblowers, (5 Hp - 22”; 2002 >). Size: 3/8” W X 26-1/2” L. (Cogged Type Belt).

875-15340 754-05110954-05110

Auger Drive Belt.For MTD 300 series, two stage snowblowers.Size: 3/8” (Skinny) W X 26-3/4” L. (Type 2) Raw Edge.

875-3811 954-0456754-0456

Drive BeltFits MTD two stage snowblowers, 2005 and newer. Size: 3/8” W X 28-3/4” L.

40-14

JOHN DEERE continued LAWN BOY continued


S S

875-091 954-0346754-0346

Wheel Drive Belt For 600, 700 series Snowblowers,8 Hp or greater, model 400, self propelled with gearbox rear drive, rear discharge mowers - 462R and 479R series. (1986-98) Size: 3/8” W X 30” L

875-99000 754-0133954-0205

Auger / Traction DriveFor 20” and 21” single stage snowthower applications. (Replaces belt# 3VX315) Size: 3/8” W X 31.5” L (Raw Edge, Cogged belt)

875-157 954-0367754-0367

Auger Drive BeltFor MTD single stage units (1990 thru 1996). Fits models: 310-180, 310-181, 310-183, 311-180, 311-181, 311-183, 311-184, 312-180, 312-181, 313-180, 313-181, 314-180, 314-181, 315-140, 315E-140, 316-140, 316E-140, 317-140, 317E-140, 31AS231, 31AE5KL, 31A-140, 31A-150, 31A-240, 31A-242, 31A-250, 31A-260, 31AE-150, 31AE-162, 31A-62EW, 31AH62E, 31AH6ZF, 31AH6ZL, 31AH9J6, 31AM62E, 31AM62K, 31AM63E, 31AM63F, 31AM63L, 31AS230, 31AS231, 31AS250, 31AS6DE, 31AS6WS, 31B-140, 31BE150, 31B-140, 31C-140, 31D-140; Wheel Drive Belt for models: 31AE5HT, 31AE6FF, 31AH5WT, 31AM62E, 31AM63T, 31AS6BC, 31AS6BE, 31AS6FE, 31AS6DT, 31AS6HE and 31AS6WE. Size: 3/8” W X 34-1/2” L

875-158 954-0430754-0430

Auger Drive Belt Set(cogged belt). For 5 Hp dual stagesnowblowers (1992 thru 1997). Fits models: 312-640, 312-660, 312-642, 313-640, 313-642, 313-660, 314-640, 314-642, 314-616, 314-660, 314-666, 31A-611, 31A614, 31A-615, 315-611, 315-613, 315-641, 315-718, 315E610, 315E640, 315E641, 315E643, 315E663, 315E740, 315E748, 315E753, 316-611, 316-613, 316-641, 316E610, 316E611, 316E613, 316E633, 316E640, 316E641, 316E643, 316E660, 316E661, 316E663, 316E733, 316E740, 316E753, 316E760, 317-611, 317E610, 317E611, 317E613, 317E733, 317E738, 317E740, 317E742, 317E753, 317E760, 317E762, 31AE600, 31AE610, 31AE611, 31AE613, 31AE614, 31AE633, 31AE640, 31AE644, 31AE645, 31AE653, 31AE660, 31AE662, 31AE663, 31AE664, 31AE665, 31AE740, 31AE753, 31AE765, 31AE6C0, 31AE740, 31AE6A4 & 31BE640. Size: 3/8” W X 35-1/8” L (cogged belt)

875-365 754-0131 954-0131

Traction Drive BeltFor models: 310-840, 310-850, 310-965, 311-840, 311-850, 311-965, 312-980, 313-980, 314-980, 315-800, 315-860, 315-960, 315-980, 316-800, 317-841, 317-850, 317-960, 318-840, 318-850, 319-840, 319-850, 319-960, 840-027, 840-031, 840-050, 840-095, 840-105, 840-205, 840-206, 840-327, 850-031, 850-054, 850-105, 850-205, 850-327, 960-206, 960-327, 31AE880, 31AE983, 31AE993, 31AE993J401 (2002), 31AE9P3, 31AE906, 31AE9P6, also rider model 50748. Size: 3/8” W X 35-1/2” L (cogged belt).


875-99001 754-0132

V-Belt.Fits many MTD snowblower applications.Size: 3/8” W X 37.3” L (Raw Edge, Cogged belt)

875-092 954-0935754-0935

Traction Drive BeltFits models: 640, 642, 646, 660 and 666. Size: 1/2” W X 30-7/8” L

875-99036 Sears modelsTraction Drive BeltFits many Snowblower applications (2003 thru 2009). Size: 1/2” W X 34.4” L (Raw Edge, Cogged belt)(Sometimes used with our 877-020 belt set or our 875-14511 Impeller drive belt).

875-99037 754-04050954-04050

Belt, Auger Drive.Fits 2 Stage snowthowers; 2005 on. For 500 and 600 series. Size: 1/2” W X 34.9” L ( Raw Edge, Cogged belt)

875-148 754-0101A954-0101A

Auger Drive BeltFits 2 thru 5 Hp - 20” single stage snowblowers. (1987 and newer). Size: 1/2” W X 35” L (covered belt)

875-15341 954-04194954-04194A

Auger Drive Belt.For MTD snowblowers.Size: 1/2” W X 44.6” L. (Type 2) Raw Edge.

875-090 954-0194754-0194

Auger Drive Belt / Fan Drive Belt. For 8 thru 10 Hp large frame snowblowers. Fits models: 310-840, 310-850, 310-965, 311-840, 311-850, 311-965, 312-980, 313-980, 314-980, 315-800, 315-860, 315-960, 315-980, 316-800, 317-841, 317-850, 317-960, 318-840, 318-850, 319-840, 319-850, 319-960, 840-027, 840-031, 840-050, 840-095, 840-105, 840-205, 840-206, 840-327, 820-031, 850-054, 850-105, 850-205, 850-327, 960-206, 960-327, 31AE880, 31AE983, 31AE993, 31AE9P3, 31AE906 and 31AE9P6. Size: 1/2” W X 45-1/4” L

875-15489 754-0125 / A954-0125 / A

Drive belt.Fits MTD / TROY BILT and YARDMAN 42”2-Stage snowblowers 500 Series (2003 thru 2008).Size: 1/2” W X 105.15” L. (Type 1 - Covered).

40-15

MTD - CUB CADET / TROY BILT MTD - CUB CADET / TROY BILT


S S

For more MTD belts - see our “BELTS - OEM EXACT

REPLACEMENT” section 03285-388 914-0143

714-0143Lynch PinFits models two-stage snowblowers. Size: Pin dia: 1/4”, Pin length: 1-3/4” under head.

230-002 741-0309941-0309

Snowblower Axle Bearing / Fan Bearing For snowblowers - self aligning. Fits 22” thru 40” blowers. Snowblower axle bearing. Fits MTD 20” thru 24” and 36 thru 40” Snowblowers. Size: 3/4” ID X 1-7/8” OD X 1.22” overall height.NOTE: Will also replace MTD# 741-0310 and 941-0310 if old collar is re-used. (Bearing# SA204-12)

230-250 741-0185 / 941-0185941-04024

Snowblower Axle Bearing Found on MTD and Toro snowblowers. For 800 and 900 series on 28” and 33” MTD snowblowers. Fits Toro models 310-230 thru 310-960 snowblowers. (Bearing# SB205-14)Size: 7/8” ID X 2-1/32” OD X 1-1/16” HT w/collar.

230-029 741-0919 / 941-0919

Bearing For MTD Snowblowers. Fits models: 491, 831, 832 and 930 series. (Bearing# 6204-2RS)Size: .787” ID X 1.851” OD X .551” HT

230-274 741-0361741-0563 / 941-0563

Snowblower Auger Bearing with Retainer Ring.Fits models 400 thru 700 series. (Bearing# 6203-2RS / 6203-2Z)Size: 17mm ID X 40mm OD X 12mm HT or .669” ID X 1.574” OD X .471” HT.

230-003 741-0155 / 941-0155Bolens# 1185169Bunton# PL4969

BearingFits models: 020, 030, 406, 430, 700, 719, 730, 740, 756, 766 series. (Bearing# 99502H)Size: 5/8” ID X 1-3/8” OD X 7/16” HT.

230-060 741-0124741-0563 / 741-0600

BearingFor 2 stage snowblowers and auger shaft bearing on single stage 400 thru 700 series. Fits Sears model: 917.270722. Mtd models: 074, 084, 114 & 314 series. (Bearing# 6203-2RS)Size: .669” ID X 1.578” OD X .475” HT.

230-276 741-0133

BearingFor Snowblowers model: 824, 840, 850 and 960 series. Size: 1/2” ID X 1-3/8” OD X 7/16” HT (Bearing# 1621-2RS)

230-270 741-04076

Bearing with Retainer ring For MTD built equipment. Found on MTD snowblower models: 31AH5ZLH704 (2008), 31AE5KLF795 (2006 -07), 31AE5KLF304 (2006), 31AE5KLF372 (2006), 31AE5KLF401 (2006), 31AE5KLF720 (2006), 31AE5MLH795 (2007) and 31AE5MLG729 (9 Hp MTD / Troy Bilt blowers) Size: 9/16” ID X 1-3/3” OD X 7/16” HT.(Bearing# 1622-2RS)

225-334 748-0108741-0248

Bronze Flange BushingFits impeller shafts. For models: 610, 612, 640, 642 and 660. Size: 1/2” ID X 3/4” OD X 13/16” HT

225-110 748-0184

Bronze Flange BushingFits models: 440, 450, 550, 552, 586, 588, 840, 841 and 850. Size: 5/8” ID X 3/4” OD X 3/4” HTFlange OD: 1-1/8”

225-045 748-0110948-0110

Bronze Flange BushingFits models: 31245S, 31250S (1985) and 225 (1988-89) series snowblowers. Size: 5/8” ID X 7/8” OD X 5/8” HT

225-128 748-0227748-0229 / 948-0227A

Bronze Flange BushingHex Nut Flange BushingSize: 5/8” ID X 1” OD X 5/8” HT

225-170 741-0339 / 941-0339 Cub Cadet# 7410339 Cub Cadet# 9410339 Troy Bilt# 7410339 Troy Bilt# 9410339

Bronze flange bushing For MTD. Found in MTD 400, 500 and 600 series. 600 series (1992 thru 1993) and 400, 500 and 600 series (1994 thru 2004). Size: 3/4” ID X 1” OD X 1” HT including flange, Flange OD: 1-1/8”.

40-16



S S

225-534 741-0245

Wheel Shaft BushingPlastic hexagon bushing, found on MTD built equipment. Size: 3/4” ID X 1-1/16” OD (Hexagon) X 3/4” HT with flange; Flange OD: 1-1/4”; 1” across the flats.

225-538 741-0598 941-0598Cub Cadet# 7410598Troy Bilt# 9410598

Flange BushingBronze hexagon bushing, found on MTD built equipment. Size: 3/4” ID X 1-1/4” OD (Hexagon) X 3/4” HT with flange; Flange OD: 1-3/8”; 1-1/8” across the flats.

225-167 741-0662741-0376

Graphite Impregnated Flange BushingSnowblower BushingSize: 3/4” ID X 1” OD X 5/8” HT, Flange OD: 1-1/2” NOTE: Banta Saw part# 225-854 is brass flange bushing with the same measurements but with a Flange OD: 1-1/4”

225-144 741-0293 / 941-0293748-0143 / 741-0339

Plastic Flange Bushing For Augers on models: 450, 550, 552, 586, 588 (1987-88) series snowblowers.Size: 3/4” ID X 1” OD X 3/4” HTFlange OD: 1-1/4”.

225-235 941-0490 / 741-0490741-0199 / 748-0151

Plastic Flange Bushing / Axle bushingFits models: 311-100A, 311-430A, 311-600A, 450, 550 and 580 snowblowers Size: 3/4” ID X 1-1/4” OD X 3/4” HT, Flange OD: 1-3/8”, measures: 15/16” (.940”) across the flats

225-314 741-0300941-0300

Plastic flange bushingFits many MTD Snowblowers. Size: 3/4″ ID X 1-1/2″ OD X 3/4″ HT Flange OD: 1-3/4″, Measures: 1-1/4″ across the flats

225-536 741-0493A

Plastic Auger Bushing. Found on MTD built equipment / blowers. Size: 13/16” ID X 7/8” OD X 5/8” HT. Flange OD: 1-1/16”.

225-673 741-0401

Plastic wheel bushing For MTD. Used to reduce wheelsfrom 7/8” to 3/4” inside diameter. Size: 3/4” ID X 7/8” OD X 1” HT

225-160 741-0661 / A

Graphite ImpregnatedFlange bushing.Auger shaft bushing found in MTD snowblower gearbox.Fits models: 400, 500 and 600 series. (2004, 2005). Size: .754” ID X 1” OD X 1” HT (Including Flange), Flange OD: 1-1/4”

225-674 741-0217

Bronze BushingFan bushing (front / rear) found insnowblowers made by MTD.Fits models: 600 thru 900 series.Size: 7/8” ID X 1-1/8” OD X 1” HT

FOR COMPLETE CARBURETORSand REPAIR KITS

FOR MTD BUILT SNOWBLOWERSSEE OUR SECTION 10 and 12

285-705 731-1313 / C Cub Cadet# 731-1313 / C

Chute Tilt Guide For MTD builtsnowblowers equippedwith remote chute tilt.Requires 2 per unit,on most applications.

Size: 3-1/16” HT X 3-1/16” W.(Two images shown for reference)

780-830 731-06451

Chute TiltCable Guide.Fits MTD built31A model seriessnowblower’s.(2008 thru 2014).

780-828 731-04913

Steering Control TriggerFits MTD built 31A model seriessnowblower’s. (2005 thru 2014).Mount on the underside of your snowblower’s hand grips.

40-17



S S

780-829 731-04896 / A / B

Clutch Lock CamFits MTD built 31A model seriessnowblower’s. (2005 thru 2014).Clutch lock cam attaches to the pivot rodbetween the left and right drive engagement handles.

780-831 731-04894 / A / B731-04894 / C / D

Auger Lock PlateFits MTD built 31A model seriessnowblower’s. (2005 thru 2014).Auger lock plate locks the augerhandle in position when adjusting the chute.

780-832 731-0851731-0851A

Chute Flange KeeperFits MTD built 31A model seriessnowblower’s. (1987 thru 2014).

780-833 731-04869731-04869A

Chute FlangeFits MTD built 31A model seriessnowblower’s. (2005 thru 2014).Chute flange attaches the chute to the chute adapter on the auger housing and allows the chute to pivot to change the discharge direction.

240-945 735-0243 / 935-0243Drive Disc RingFor MTD Snowblowers. Made of quality rubber.Size : 4-7/8” OD X 3-7/8” ID

240-944 735-04054

Drive Disc RingFits on MTD Snowblowers. Measures: 5-1/2” OD X 4-1/2” ID. Made of rubber.

240-915 05080 / 05080A

Drive DiscFor Snowblowers & Riders. Fits models: 500, 510, 520 and 600. Also found on John-Deere Snowblowers made by MTD.Size: 6” OD X 1-1/8” ID, (3) bolt hole pattern.

240-918 718-0494

Drive Disc / Friction Wheel Assy.Fits MTD, Cub Cadet, Troy Bilt, White, Bolens, Garden Way, Yardman and Yard Machine application. For 800 & 900 serieslarge frame snowblowers with 6 bolt mounting.(1998 thru 2002). Size: 6” OD X 2” ID (6) bolt hole pattern.

240-922 618-07239

Drive Disc / Friction Wheel Assy.

Fits 2005 and newer snowthrowersthat were equipped with a 3/4” diameter Hex drive shaft. Replacement friction disc set to replace our now discontinued drive disc 240-919 (MTD# 718-04034). Fits many MTD built snowblowers, under the the brand names Cub Cadet / MTD, TROY BILT, YARDMAN etc.

240-924 618-0296 618-0296B

Drive Disc / Friction Wheel Assy.

Fits 1998 thru 2004 snowthrowersthat were equipped with a 7/8” diameter Hex drive shaft. Replacement friction disc set to replace our now discontinued drive disc 240-919 (MTD# 718-04034). Fits many MTD built snowblowers, under the the brand names Cub Cadet / MTD, TROY BILT, YARDMAN etc.

240-194 713-0194913-0194713-0194-1

Drive Sprocket & Hub Assembly

Used on large frameSnowblowers 1975 thru 1997. Large Gear: 5-1/2” OD with 32 teeth, Small gear: 1-3/4” OD with 9 teeth, Bore; 5/8”, Includes: (2) 225-110 brass bushings. (MTD# 748-0184)

780-717 717-1425917-1425717-0300917-0300

Worm Gear Left hand double thread. For models: 800 and 900, 28” and 33” width Size: 2.875” OD X 1.5” ID X .875” HT, 20 tooth gear, 1/4” keyway. (Made of brass/bronze material)Two images shown for reference

780-733 717-0528 / 917-0528

Worm GearFits on many MTD 2-stage Snowblowers. Fits models since 1992. Size: 1.90” OD X .750” ID X .650 hub width, 20 tooth gear, 3/16” keyway. Brass / Bronze material(For use with our 780-530 Impeller Shaft).

40-18



S S

780-720 717-0299 / 917-0299 Cub Cadet# / Troy Bilt#7170299 / 9170299

Double Threaded Worm Gear (Left Hand) Fits MTD Snow Pro models: 4051 / 850-0795;317-851-101. Found on 45” snowblowers (1987 & newer) plus many other models - see dimensions. Size: 7/8” ID X 1-3/4” OD X 1-3/4” HT. Keyway: 3/16”.(Install with our 780-717 Brass Worm Gear).

780-724 748-0224/ 948-0224

Spur GearFor MTD built snowblower.(1986 thru 1993).Size: 3/4” ID (10 tooth spline) X 2” ODX 20 Tooth Gear. Gear Width: 1/4” X 1/2” Overall HT.

495-145 721-0145

Oil SealFits on MTD Snowblowers.Size: .875” ID X 1-1/4” OD . (Garlock# 76 X 6)

495-146 721-0146

Oil SealFits on MTD Snowblowers.Size: 1-1/2” ID X 1-7/8” OD. (Garlock# 76 X 62)

495-147 721-0179 / 921-0179 Troy Bilt# 7210179 / 9210179

Oil SealFits MTD Snowblower 600 series (1992 thru1993) and 400, 500 and 600 series (1994 thru 2004). Size: 3/4” ID X 1-1/8” OD X 1/8” HT.

780-050 684-04025 / A / 984-04025 684-04027 / A / 984-04027 / A 784-5485 / 984-5485706-15686-00-11

Complete Auger Assembly For MTD built 21” single stage snow blowers. Models: 31**1** and 31**2** built between 1990 thru 2005. Shaft length overall: 20-5/8”, Diameter with rubber paddles: 9”. Comes complete with our 780-120 paddle Set installed.

780-798 618-0123 / 918-0123A618-0124 / 918-0124A

Snowblower Gear Box Cover AssemblyFor MTD built snowblowers. (2 pcs both LH + RH sides). Fits RYOBI 31AE Snowblower; MTD 31AE 31AH 31AM 316 317 Snowblowers; YARD MACHINES 31AE 316 317 Snowblower; BOLENS 31AS Snowblower; YARDMAN 31AE 31AH 31BH 316 317 Snowblower. Also on several other MTD built snowblowers; 300, 400, 500 & 600 series. (1995 on). Found on Cub Cadet, Sears / Craftsman, MTD, TROY BILT blowers etc. Includes: (1) Left Hand Housing (618-0124) + (1) Right Hand Housing (618-0123). Housing Size: 5” W X 4-3/4” with 3/4” Shaft ID. Zerk fitting on LH Housing only.

780-800 618-0246 / 618-0247 / 710-0260A 717-0297 / 717-0298 / 753-0889

Snowblower Gear Box Cover AssemblyFor MTD built snowblowers. * ORIGINAL OEM PART *Fits Large Frame MTD snowblowers; 800 & 900 series. Replaces old#’s 717-0297 & 717-0298.Fits Sears / Craftsman snowblower model# 317E-262-000 etc.Includes: (1) Left Hand Housing (618-0247) + (1) Right Hand Housing (618-0246) + (7) Screws (710-0260A).

780-016 731-0782 (Bar) 731-0781 (LT curve)731-0780 (RT curve)721-0287 753-0613 931-0780A 931-0782A

Paddle SetMTD Snowblower (6 piece set) Fits model 21” Snow Wolf. Rectangle measurement: 1-1/2” X 3-3/8”, (2) mounting holes on 2” centres. Crescent measurement: 1-1/2” X 11-1/4”(Use with our 780-017 scaper bar)

40-19



S S

780-120 735-04032 / 735-04033 / 753-04472

Paddle SetMTD Snowblower(6 piece set).Fits newer 21”single stagesnowblowers;2004 and newer.

Includes: (4) 735-04032 spirals and (2) 735-04033 paddles. Rectangle paddles have two mounting hole and measure: 1 7/8” W x 4” L x 1/4” HT; Half round paddles have four mounting holes & measure: 1 7/8” W x 11 1/4” L x 1/4” HT.(Replacement paddle set for our 780-050 Auger Assembly).

780-017 731-1033 / 731-0778 / 731-0812

Scraper Bar Fits models: 191, 174, 180, 181, 196 Snow Wolf Snowblowers made since 1988. Size: 19-7/8” long with (4) 1/4” X 1” mounting holes on 6” centres. (Use with our 780-016 paddle set)

780-122 753-06469

PaddleFound on Cub Cadet /Columbia / MTD / Troy BiltSnowblower.Fits MTD built 100 and 200 series single stage units. Requires (2) paddles per unit, this is a single paddle, OEM is a set of 2. Found on Yard Machines 21” Snowblowers, 10010SSPA2; 21” SS for Snow Claw Auger. Found on COLUMBIA: 21” 2011 snowblowers; CUB CADET models: 221HP, 221LHP and 1X221LHP; MTD models: 31A-2M1E, 247.116830, 247.887821, 31AS2S1E700 and 31AS2T5E704; TROY BILT models: Squall 21” snowblowers, 210, 210E and 2100.Size: 20” Long X 9-1/4” Wide, (6) mounting holes

780-019 731-07667 / 931-07667

Scraper BarFits CUB CADET:221 HP and 221 LHP snowblowers;208cc OHV engine with 21 in. clearing width.Also found on MTD model: 31AS2S5D799 (2010).Size: 19-13/16” long with (3) mounting holeson 8-3/4” centres X 2-3/4” Wide X 1/8” Thick.

790-022 784-5576 / 784-5576-0637 790-00117-0637

Scraper Bar / Shave PlateFits MTD built 22” two-stage snowblower models.1995 and newer.Size: .474” ID X 2-1/4” W X 22” L;4 mounting holes. Thickness: .105”.

790-024 784-5581 / A / 784-5581A-0637 784-5581A-0662 / 784-5581A-0687 790-00120-0637

Scraper Bar / Shave PlateFits MTD built 24” two-stage snowblower models.1992 and newer.

Size: .490” ID X 2-1/4” W X 24” L;4 mounting holes. Thickness: .107”.

790-026 753-0626 / 753C0628784-5579 / 784-5579A784-5579-0638 / 784-5579-0692 784-5579A-0629 / 784-5579A-0667 784-5579A-0691 / 790-00121-0637

Scraper Bar / Shave PlateFits MTD built 26” two-stagesnowblower models.1992 and newer.


790-028 753-0629 / 753C0629 784-5582 / A / 784-5582A-0637 790-00118-0637

Scraper Bar / Shave PlateFits MTD built 28” two-stagesnowblower models. 1992 and newer.

Size: .473” ID X 2-1/4” W X 28” L; 4 mounting holes. Thickness: .109”.

790-030 790-00119-0637

Scraper Bar / Shave PlateFits MTD built 30” two-stage snowblower models.


150-695 751-11196 / 951-11196

Electric Starter Motor 120 voltFits MTD built snow blowers using 478-SU, 483-SU and 490-SU engines built 2009 thru 2010. > 14 tooth gear.

INCLUDES: Starter with 110V starter button attached.Measures: 7-1/2” overall length, Starter Body OD: 3-1/8”,(2) .350” ID mounting holes on 3.15” centers.Note: Starter cord NOT included.

40-20



S S

150-696 684-04025 / 684-04025A 684-04027 / 684-04027A 784-5485 / 984-5485984-04027 / 984-04027A

Electric Starter Motor 120 volt. Fits MTD built snow blowersusing 265-JU, 270-JU, 165-SU,370-SU, 365-SUA, 365-SUB,370-SUA, 370-SUB, 270-Vengines built 2007 thru 2010.> 17 tooth gear.

INCLUDES: Starter with 110V starter button attached. Measures: 7-1/4” overall length, Starter Body OD: 2-5/16”, (2) .256” ID mounting holes on 2.96” centers. Note: Starter cord NOT included.

285-704 756-0625

Cable Roller Guide For MTD built snowblowers. (Made of plastic). Size: 1-1/8” OD X 3/8” ID X 5/16” overall HT.

417-691 715-0143

Roll PinFits on MTD Snowblowers.Size: 1/4” diameter X 1-1/4” long

780-254 710-0890 (bolt)712-0158 (nut)

Shear BoltsFor two-stage models, Size: 1-1/2” L X 5/16”-18 threads

780-256 710-0891 (bolt)712-0158 (nut)

Shear BoltsFits models with auger drive.Size: 1-3/4” L X 5/16”-18 threads

780-249 738-04124738-04124A

Shear PinFits newer style MTD snowblowers. Shear pin hair pin type,non threaded. Fits models: 31A-3BAD700 thru 31A-S6LEG752 series; 2005 and newer snowthrowers. Size: 1-1/2” long X 1/4” diameter, Overall length: 1-5/8”. (Hair pin / Bow Tie pin included)

780-248 738-04155Shear Pin Fits newer style MTD snowblowers. Shear pin hair pin type, non threaded.Fits all late model 2 stageMTD Snowthrowers with 1” auger shaft and stamped steel augers. Size: 1-3/4” long X 1/4” diameter, Overall length: 1-7/8”. (Hair pin / Bow Tie pin included)






780-251 714-04040Hair PinFits newer style MTD Snowblowers.(Use with our 780-248 and 780-249 shear pin)

285-388 714-0143 / 914-0143Linch Pin Fits all two-stageMTD snowblowers models. Size: Pin dia. 1/4”, Pin length: 1-3/4” under pin head.

430-492 725-1660TC-35062

Starter Key Found MTD models:314-180-000, 314-180-088,TMO-3525203, 314-180-131 and 314-181-000.Fits snowblower models: ST524, ST724, ST824, ST1024, ST1028, ST1128, ST1332 and ST1336. Push / Pull key (Red Plastic)

430-386 951-10630Ignition Key Fit snowblowers with Zongshen engines. Used on Craftsman and Huskee snowblowers. Fits our 430-390 ignition switch, replacement key for MTD# 951-10637

430-390 951-10637

Ignition KeyFit snowblowers with Zongshen engines. Used on Craftsman andHusqvarna snowblowers. (2) positions, (2) terminal (Ignition key 430-386 included)

285-062 732-0303

Clutch SpringFor MTD Snowblowers Size: 3-1/4” overall length. Thickness: .052”Coil length: 2-3/8” X Coil diameter: 3/8”.

285-059 732-0264

Traction Spring For MTD snowblowers. Found on 8 and 10 Hp models. Measures: 2-5/8” overall length, Coil Length: 1-1/2”, Coil diameter: 3/8”. Thickness: .055”

285-061 732-0710

Traction Spring For MTD snowblowers. Found on 8 and 10 Hp models. Measures: 2-3/4” overall length, Coil Length: 1-1/2”, Coil diameter: 3/8”. Thickness: .050”

285-063 732-0611Auger Spring For MTD built snowblowers. Found on 8 and 10 Hp models. Measures: 3-11/16” overall length X 2-7/16” coil length X coil diameter: 3/8”. Thickness: .050”

40-21



S S

780-270 5002 / 05002

Skid Plate For 1988 - 1989,20” & 26” Snowblowers.Fits models: 225 and 590. Size: 5-1/4” L X 3-1/4” W X 7/8” HT;(2) 7/16” X 2” mounting slots on 3” centres.

780-280 784-5038A / B / 984-5038A / B

Skid PlateFor most 2-stage Snowblowers. Fits models: 449, 450,550, 552, 586 and 588. Size: 10-1/4” L X 3-1/2” W, (5) 7/16” X 2-1/2” mounting slots on 1-1/2” centres.

780-285 784-5580 / 784-5580-0637

Skid PlateFor MTD 2-stage Snowblowers. Found on models:312-610E000 (1992), 313-610E000 (1993),314-612E000 (1994), 315E610E000 (1995) and316-E610E000 (1996). Size: 4-7/8” L X 3” W X 3/4” HT; (2) 3/8” X 2-1/8” mounting slots on 2-3/4” centers.

780-290 05002 / 050020637

Skid PlateFits John Deere and MTDSnowblower models: 524D, 724D, 826D, 828D,924D, 1032D, 1128DDE and1332DDE.

Measures: 7/16” X 2” slots, 3” center to center. Size: 5-3/4” L X 3” W X 15/16” HT. (For double sided skid plate see our 780-300)

780-300 05002 / 05002-0637

Skid PlateDouble sided, reversible runner. Fits models: 190-486-000, 19486C, 196-486-000,310345, 311345, 31340-7, 8, C,31345-9 and 31350C.

Size: 5-3/4” L X 3-5/8” W X 1-1/16” HT; (2) 7/16” X 1-3/4” mounting slots on 3” centers.

780-276 1728567001

Skid PlateFits TROY-BILT models:42000, Serial No.420000100101-420001199999,21” self-propelled; 42012, 26” self propelled snowblowers Size: 8-1/4” Long X 2-5/8” Wide with(2) 7/16” X 1-1/2” slots on 3” center to center.

780-628 731-06931

Skid PlateFor Cub Cadet andMTD Snowblowers.Fits Cub Cadet models:524, 526, 528, 530, 728 and 729.Size: 10” L X 3-1/2” W X 1/2” HT;(2 sets) 3/8” X 1-7/8” mounting slots on 1-3/16” centers.

780-630 731-06472

Skid Pad SetUniversal Deluxe Poly Skid Pad Set. Includes mounting hardware: (4) 5/16”-18 bolts & lock nuts, (4) 3/8”-16 bolts & lock nuts, (4) washers, (2) adjustable plastic inserts and (2) plastic skid plates. Skids measures: 10” Long X 3-1/2” High X 3/4” Thick.

285-608 746-0694Lock-out CableFits models: 800 to 996 series. 1989 & later. Overall Length: 28-3/4”, Cable Length: 23-3/4”

285-609 746-0367Blower CableFits older models:Before 1992Overall Length: 31-1/2”, Cable Length: 26-1/4”

285-610 746-0435Traction CableFits older models Before 1992. Overall Length: 37-1/2”, Thread Length: 4”.

285-002 746-0506 / 746-0573

Auger Drive CableFits on MTD Snowblowers. For 21” snowblowers. Conduit Length: 33-1/4”, Overall Length: 42-1/2”

5-3/4”

1-1/4”2-1/4”

4”

40-22



S S

285-600 746-0898 / A / 946-0898

Clutch Drive CableFits 600 model series MTD snow blowers built 1995 thru 2002 & 700 series built in 2003.

Models 312-610E000 (1992), 313-610E120 (1993) and 314-616E131 (1994) snowblowers. Auger Clutch Cable - Fits 400 thru 600 series MTD snow blowers built 1992 thru 2004. Conduit Length: 38-1/4”, Overall Length with spring: 39-3/4”. Threaded Rod: 4-3/8” overall length. Note: Our 285-600 includes: Conduit, spring & threaded rod. (Threaded rod is also sold separately, see part# 285-590).

285-599 746-0897 / 946-0897746-0778 / 946-0778746-0897A / 946-0897A

Auger Clutch CableFits 400 thru 600 series. Fits many2 stage snow blowers (1995 thru 2012).Overall Length with spring: 44-3/4”. (NOTE: Threaded rod NOT included, sold separately - see our part# 285-590).

285-590 746-0778

Threaded Control Cable End.Used on many MTD, Murray and Noma / Canadiana snowblowers. Size: 4-3/8” Overall Length. (Used on our 285-600 and 285-599 control cables).

285-598 746-0896 946-0896

Chute Control CableFor MTD Snowblowers. Fits newer models built since 1993. Conduit Length: 47”, Overall Length: 54-1/4”;Wire Travel: 6-3/4”

287-133 746-0901 / 946-0901

Chute Defl ector control cableFits many MTD built /Cub Cadet31A series snow blowers,31A series snow blowers,WITH fl oating cable clip.(1998 thru 2005).Conduit Length Includingthreaded end): 46-5/8”,Overall Length: 54-3/8”;Wire Travel: 7”.

287-138 746-04477946-04477

Chute 4-way Control Cable Fits some MTD built 2 stage snow blowers with joystick chute control (2009 thru 2012). Conduit Length: 54”, Overall Length: 61-5/8”; Wire Travel: 6-5/8”. Barrel on both ends. Includes plastic conduit clip as shown.

287-139 746-04528A / B946-04528A / B

Chute 4-way Control Cable Fits some MTD built 2 stage snow blowers with joystick chute control (2009 thru 2012). Conduit Length: 55”, Overall Length: 62-1/4”; Wire Travel: 5-3/4”. Barrel on both ends.

287-146 746-0902946-0902

Chute Control Cable Fits some MTD built 2 stage snow blowers(1997 thru 2011). Conduit Length: 66”, Overall Length: 73”; Wire Travel: 6-5/8”. Threaded adjustment on one end with barrels on both ends.

287-147 746-0903946-0903

Chute Control Cable Fits some MTD built 2 stage snow blowers (1997 thru 2012). Conduit Length: 67”, Overall Length: 74”; Wire Travel: 6-3/8”. Threaded adjustment on one end with barrels on both ends.

287-135 746-04237946-04237

Clutch Control Cable Fits many MTD built single stage snow blowers (2005 thru 2010). Conduit Length: 26”, Overall Length with Spring: 41-3/4”; Wire Travel: 13-3/4”.Z-Bend on on end with spring on the other.

40-23



S S

287-145 746-04619A946-04619A946-04619B

Chute control cable.Fits MTD built snow blowers. Fits Craftsman: 2013 snowblowers; Fits CUB CADET: 2X and 3X snowblowers; Fits MTD Gold: 2010-2013 snowblowers; Fits YARDMAN: 2010-2013 snowblowers. Conduit Length: 45-3/4”, Overall Length: 48”; Wire Travel: _____”. Barrel on one end, ball on other.

285-405 746-0910A

Auger Drive & Traction Cable For many MTD snowblowers since 1995. Fits 180 series single stage snowblowers. Conduit Length: 35-3/8”, Total Length: 41-1/2”

285-586 746-0951946-0951

Auger Idler Control Cable For MTD snowblowers. Found on 800 & 900 series (large frame) snowblowers; 1998 & newer. Measures: 16-1/4” Overall Length, Cast Z-Bends on both ends.

287-142 746-04640946-04640

Auger Cable For some MTD built 2 stage snowblowers. Fits models: 31A-32AD706 (2010), 31A-32AD706 (2011) Two-Stage Compact Snowblowers. Fits Yardman models: 31A-32AD700 (2010), 31A-32AD700 (2011), 31A-32AD752 (2010), 31A-32AD752 (2011) Walk Behind Snowblowers. Conduit Length: 23”,Overall Length with Spring: 47-1/2”; Wire Travel: 21”. Z-Bend on one end with spring on the other.

287-140 746-04007946-04007

Auger Clutch Cable.Fits many MTD built /Cub Cadet 31A series snowblowers (2004 thru 2010).Conduit Length (Includingthreaded end): 33-1/2”,Overall Length with Spring:50-1/4”; Wire Travel: 13”.Z-Bend on one end with spring on the other.

287-134 746-04236946-04236

Auger Clutch Cable Fits many MTD built2 stage snow blowers(2005 thru 2012).

Conduit Length: 22-1/2”, Overall Length with Spring: 47-1/2”; Wire Travel: 21-3/8”. Z-Bend on on end with spring on the other.

285-570 746-05067 / 946-05067

Wheel Drive / Drive Clutch CableFor MTD / TROY BILT built snowblowers (2013 thru 2016). Fits MTD models: 12ABD29V897 (2015), 12ACD29W897 SP21SE (2016), SP21S (12ABD29V897) (2016). Overall Length including spring: 45-1/4”, Overall Spring Length: 3-1/4”.

285-594 746-04229 / B946-04229 / B

Wheel Drive / Clutch Cable For MTD built snowblowers. Overall Length including spring: 45-3/8”, Overall Spring Length: 2-1/8”.

285-596 746-04230 / A / 946-04230 / A

Wheel Drive / Auger Clutch Cable For MTD snowblower models:31AH5ZLH704, 31AM63LF704,31AH6ZLG704 (2008), 31AE5KLF795,31AE6GFF795, 31AE5MLH795 (2007),31AE5KLF796 (2006), 31AE6BHE718 (2005 on). Overall Length including spring: 48”, Overall Spring Length: 2-1/8”.

285-587 746-04227A

Speed Selector Control Cable For MTD snowblowers. Found on MTD Pro series model31AE6BHE718 (2005 and newer).Measures: 22-1/8” Overall Length, Cast Z-Bends on one end and a cast barrel end on the other.

285-584 746-04396 / A946-04396 / A

Speed Selector Control Cable For MTD snowblowers.Measures: 22-1/8” Overall Length,Cast Z-Bend on one end and acast hammer head end on the other.

40-24



S S

285-588 746-04228A

Speed Selector Control Cable For MTD snowblowers. Found on MTD / White models:31AE6BHE718, 31AE6GLF00,09, 19, 26, 31AE6GLF795, 31AE6L04766, 31AH6BHE790, 31AS6BEE700, 31AS6BEE731, 31AS6FEF700. Measures: 24-1/8” Overall Length, Cast Z-Bend on one end and a cast barrel end on the other.

287-148 746-0949 / A946-0949 / A

Steering Cable Fits some MTD built 2 stage snow blowers(1998 thru 2012).Conduit Length: 32-3/8”, Overall Length: 34-3/8”;Wire Travel: 1-3/16”.Z-Bend on one end with a barrel on the other.

287-149 746-0956B / C / 946-0956B / C

Steering Cable Fits some MTD built 2 stagesnow blowers (1998 thru 2012).Conduit Length: 36-1/2”, Overall Length: 39”;Wire Travel: 1-3/8”. Z-Bend on one end with a barrel on the other.

285-591 746-0716 / 946-0716Lock-out Cable / Auger Clutch Cable For MTD built snowblowers. Overall Length: 23-1/4”.Cast Z-Bend on one end with a 1/4” diameter threaded end on the other.

285-592 746-0952 / 946-0952

Lock-out Cable / Auger Clutch Cable For MTD built snowblowers.Fits MTD 800 and 900 series,large frame snowblower. (1998 and newer). Overall Length: 26-1/2”. Cast Z-Bend on one end with a 1/4” diameter threaded end on the other.

285-593 746-04086 / 946-04086Lock-out Cable/ Auger Clutch Cable For MTD built snowblowers.Fits MTD 500 and 600 series.Overall Length: 42-3/4”, Coil Spring Length: 2-1/2”.

287-143 746-04642 / A946-04642 / A

Traction Drive Clutch Control Cable Fits some MTD built 2 stage snow blowers (2009 thru 2012). Conduit Length: 35-1/2”, Overall Length with Spring: 51-1/4”; Wire Travel: 13”. Z-Bend on on end with spring on the other.

287-141 746-04008946-04008

Traction Drive Cable.Fits many MTD built /Cub Cadet 31A series snowblowers (2004 thru 2010).Conduit Length: 34-3/4”,Overall Length with Spring: 51-1/4”;Wire Travel:14”.Z-Bend on one end with spring on the other.

287-136 746-04256946-04256

Traction Drive Cable Fits many MTD built 2 stage snow blowers (2005 thru 2008). Conduit Length: 34-3/4”, Overall Lengthwith Spring: 52”; Wire Travel: 13-3/4”.Z-Bend on one end with spring on the other.

285-554 746-04238 / 942-04238

Drive Control Cable Fits MTD / Yardman. Fits Yardman models: 31AE5KLG801 (2007) Snowblower.Conduit Length: 50-1/4”, Total Length: 51-3/4”.

290-025 746-0390 / 746-0390A / 746-547

Throttle control For MTD built snowblowers.Found on MTD, Yardman,Columbia models 250, 280,281, 450, 510, 511, 520, 580,761, 766, 821, 840, 961.Inner Wire Length: 32-1/2”,Conduit Length: 30”, Wire Travel: 1-1/2”.

418-987 714-0161 / 914-0161

Woodruff Key - High ProfileUsed on many snowblower applications.Found on Auger shafts etc.Size: 3/16” X 5/8”.

40-25



S S

780-546 738-0276

Snowblower AxleFits MTD two stage 28” and 33”, (1996 & older) models: 800 and 900.Measures: 19-1/8” Overall length X 7/8” OD, (2) 5/16” holes on 1-1/8” centers, (2) 3/16 keyways

780-532 711-0910 711-0910A

Auger Axle For MTD built snowblowers. Found on Cub Cadet, Troy Bilt and MTD branded snowblowers. 28” Blowers. Models: 400 thru 600 series. Measures: 27-1/2” Long X 3/4” Shaft OD. Two 5/16” ID holes centered @ 6-11/16” from both ends. One 3/16” X 9/16” half moon keyway centered @ 13-3/4”.

780-545 738-0284

Differential Connecting ShaftFits MTD snowblowers. Measures: 11-7/8” Overall length X 5/8” OD, (2) 1/4” holes on 5/8” centers, (2) 3/16” holes on 1-1/8” centers.

780-530 717-0526

Impeller / Fan ShaftFits MTD built snowblowers. Models: 400 thru 600 series. (1992 thru 1993). Measures: 13-1/2” Overall Length X 3/4” diameter. Shaft has a spline on one end and 1/2” OD X 5/8” Long end on the other. (For use with our 780-733 worm gear).

780-534 717 04126 / 917-04126

Impeller Shaft / Impeller Worm Shaft *** ORIGINAL OEM PART ***Found on MTD, Yard Machine and Yard Man snowblowers. Fits MTD series 31AEXXXXX (2005 and newer); Yard Machine series 31AE6 (2005) and Yard Man series 31AEXXXXX (2005 thru 2007). Measures: 13-1/2” Overall Length X 3/4” diameter. Shaft is squared at one end (3/4” OD X 9/16” across the flats X 2-3/8 flat length) and 1/2” OD X 9/16” Long on the other end.(For use with our 780-733 worm gear).

MURRAY / NOMA805-014 579932 / 173334

579932MA / 302507Traction Drive Belt For Murray built snowblowers, built between 2000 thru 2008. For models: 622505, 622515, 622518, 624504, 624505, 624604, 624650, 629117, 62451, 6271200, 6271201, 6271500, 624808, 624858, 626750, 626752, 627107, 627108, 627109, 627117, 627118, 627804, 627808, 627809, 627815, 627850, 627858, 627904, 627954, 628102, 628104, 629105, 629106, 629108, 629109, 629110, 629111, 629118, 629119, 629159, 629924, 631108, 6240810, 6271100, 6240900, 6271200, 6271201, 6271270, 6271271. Found on Sno Super, Sno Blizzard, Alpina, Sno Unlimited. Fits 22” thru 24” and 26” thru 33” models built after 1995 - except 12 Hp. Found on Sno Super, Sno Blizzard, Alpina, Sno Unlimited.Size: 3/8” W X 33-1/4” L

875-192 37X132 / 760928 760928MA / MT760928MA

Auger Drive BeltFits Murray / NomaAMF / Canadiana snowblowers. Single stage, sub compact frame with 2 cycle engine. (20” - 21”). Kevlar belt, Raw Edge. Size: 3/8” W X 34.7” L

875-99029 35263526MA

Auger Drive BeltBelt for AMF / Noma snowblowers.Size: 1/2” W X 30-1/8” L. (Kevlar, Raw Edge belt)

875-99030 38873887MA

Drive BeltFor Murray / Noma snowblower. For Snowblowers - 8 Hp. Size: 1/2” W X 30-7/8” L (Kevlar belt, Raw Edge)

40-26



S S

875-8760 585416 / C585416MA

Auger Drive Belt Fits many 8 and 10 HP models with 16-inch diameter wheels and a 12-inch diameter auger (Dealers have stated to us that this belt will replace Noma / Murray# 585416C. NOTE: The Original (OEM) belt measures: 17/32” W X 37.6” L ).Size: 1/2” W X 37.8” L (Cogged belt)

875-10039V Belt For snowblowers. Size: 1/2” W X 38.5” L

875-99038 585416 / 585416MA742550 / 742550MA

Auger Drive BeltFor 2 Stage snowthowers, Mid frame wheel drive, (1997 thru 2000). Size: 1/2” W X 38.3” L (Kevlar belt, Raw Edge)

875-99039 585436585436MA

Auger DriveBelt For 2 Stage snowthowers, Large frame track drive on 31” and 33” blowers. Size: 1/2” W X 37.8” L (Kevlar belt, Raw Edge)

875-251 584802584802MA

Belt For Murray / Noma & Sears snowblowers.Auger Drive Belt, 12 Hp (1993).Size: 1/2” W X 34-1/2” L. (Raw Edge - Type 2).

875-250 51224 / 51224MA 313847

Auger Drive Belt.For Murray / Noma snowblower. Size: 17/32” W X 40.5” L. (Raw Edge - Type 2).

230-265 9648 / 780048 / 761507

Bearing with cage assembly Fits many manufacturerssnowblowers - Amf, Canadian, Noma, Murray etc. Bearing ID: 7/8” ID with .200” keyway (included). Cage measures: 3-3/4” L X 2-3/4” W; Bolt holes are on 3” centres. (Uses our 230-267 replacement bearing)

230-267 9648 / 780048761507

Bearing onlyFor Noma Snowblowers.Size: 7/8” ID X 2” OD X 9/16” HTKeyway: .200”

230-006 579863BearingFits models: N1030DEL &N1232DEL. (Bearing# 6001-2RS)Size: .472” ID X 1.102” OD X .315” HT

230-276 423756Bearing Found Murray / Noma snowblowers. (Bearing# 1621-2RS)Size: 1/2” ID X 1-3/8” OD X 7/16” HT

230-003 580781MJ49562

BearingFits models 1994 and newer.(Bearing# 99502H / 1623-2RS)Size: 5/8” ID X 1-3/8” OD X 7/16” HT

230-060 12325MA / 1255MA 1501389MA / 49562MA 782973MA / 49562

Bearing Found Murray / Noma snowbloers (Bearing# 6203-2RS) Size: .669” ID X 1.578” OD X .475” HT Bearing with retainer ring use our Part# 230-274.

230-034 85087761508MJ761508

BearingFor Noma & Murray Snowblowers. (Bearing# 1640-2RS)Size: 7/8” ID X 2” OD X 9/16” HT

230-032 85086579863MJ579863

BearingFor Noma Snowblowers. (Bearing# 1641-2RS)Size: 1” ID X 2” OD X 9/16” HT

225-470 MJ78007350673

Needle bearingFor Murray / Noma snowblowers. Foundf on models: 826, 1026 and 1032. Size: 3/4” (.750”) ID X 1” OD X 3/4” (.750”) HT. (Taller version of our 225-466).

225-334 MJ8550453829

Bronze Flange BushingNoma and Murray snowblowersSize: 1/2” ID X 3/4” OD X 5/8” HT

40-27

MURRAY / NOMA cont. MURRAY / NOMA cont.


S S

225-150 53731 / 53731MA Swisher# 53731 / 53731MA

Bronze Bushing / Bearing Sleeve For Murray / Noma / Canadiana.Impeller shaft bushing / bearing sleeve.Found on many Sears / CraftsmanDual Stage snowblowers. Models 536-888110 etc. Size: 3/4” ID X 7/8” OD X 3/4” HT.

225-673 Murray# 585581 Noma# 578572

Plastic wheel bushing For MTD. Used to reduce wheels from 7/8” to 3/4” inside diameter. Size: 3/4” ID X 7/8” OD X 1” HT

225-851 53836MJ313887

Graphite ImpregnatedHex Flange BushingSize: 3/4” ID X 7/8” OD X 21/32” HT. Measures 7/8” across the flats.

225-852 581730

Bronze Flange BushingAxle bushing.Size: 3/4” ID X 1-1/8” OD X 3/4” HT

225-850 85084MJ780037

Bronze Flange BushingNoma and Murray snowblowersModel: 924Size: 7/8” ID X 1-1/8” OD X 5/8” HT

230-025 54837577023

Auger Bushing Plastic - Noma Snowblowers.Size: 43/64” ID X 1-7/8” WX 3-3/4” LBolt holes: 1/4” on 2.932” centres. HT: .925”

230-268 780013 / 780013MA85504 / 85504MA

Bushing with cage assembly For Murray / Noma / Canadiana Snowblowers. Bushing ID: 1/2” ID X 3/4” OD. Cage measures: 2-1/2” X 2” W. (Uses our 225-334 bushing - included).

230-262 334163 / 1413 Swisher# 334163

Bearing with cage assembly For Snowblowers. Fits many manufacturers snowblowers - Murray / Noma / Canadiana, Sears / Craftsman, Swisher etc. Self-Aligning Bronze Bushing ID: .500” X .500” HT. (2) 5/16-18” threaded mounting holes on 1-3/4” centers.

780-580 579726 / 579726MAJohn Deere# AM119482

Impeller Bearing Housing only For John Deere, Murray / Noma snowblowers. Found on John Deere snowblower model 826 etc. (Made of Aluminum). Size: 1-1/4” ID X 7/8” Overall Height. (3) 5/16” Mounting holes on 2.35” centers. (Uses our 225-677 Bronze Bushing in many applications).(Two Images shown for reference)

780-590 53757MA313873MA

Auger Shaft / Drive Shaft Bearing.***** ORIGINAL OEM PART ****.Found on BRIGGS & STRATTON,Murray, Noma, Sears / Craftsman andseveral other manufacturers snowblowers.Size: 1” ID X 2-7/8” Overall Length.(2) 1/4” ID holes on 2-1/4” centers. Height at mounting holes: 15/16” and steps down to 5/8”.

240-910 53830 / 3138839005383MJ31388315014351501435MA

Drive DiscNoma 23”, 25” & 30” Snowblowers. Also found on 21” self propelled mowers, 1983 to presentSize: 4-3/8” OD X 2-1/4” ID, (3) bolt holes

240-900 35550 / 5550MJ7800866779

Drive Disc Our most popularselling drive disc. Found on many differentmanufacturers equipment. Size: 5-3/8” ID X 6” OD. (Use our 240-325 brake lining if required).

40-28



S S

240-955 780086780086MA

Drive Disk / Friction DiscConversion Kit For Murray / Noma snowblowers etc. Comes complete as shown mounted to our 240-900 drive disc.Found on several models includingNOMA model# CN825ET etc. (Fits our 240-035 and 240-041 - shaft & gear assemblies)

275-782 313858 / 53715MA MJ313858 / 53715

Engine PulleyFor Sears / Craftsman,Murray / Noma / Canadianasnowblowers.Found on Sears / Craftsman 5 Hp model,24” Dual Stage (Model: 536-885471 etc). Measures: 3/4” ID X 3” ODwith a 3/16” built-in keyway. For 1/2” belts.(Two Images shown for reference)

275-090 53759 / 53759MA

Steel PulleyUsed on Murray / Noma built snowblowers. Measures: 7/8” ID X 6-1/2” OD X 1-1/4” Hub Length. Keyway: 3/16”. Complete with (2) set screws.(For 1/2” V-belts).

275-094 50796 / 50796MA

Steel PulleyUsed on Murray / Noma built snowblowers.Measures: 7/8” ID X 8-1/2” OD X 1-3/8” Hub Length. Keyway: 3/16”. Complete with (2) set screws.(For 1/2” V-belts).

780-735 51405 / 51405MA

Worm Gear Fits small frame snowblowers. Size: 2” OD X 3/4” ID. Hub Width: .645” Gear Width: .495”, Keyway: 3/16”, Teeth: 22

780-737 53730 / 53730MA

Worm GearFits large frame snowblowers. Fits model: 627808X61E and others.Size: 3-1/8” OD X 1” ID X 7/8” Thick, Keyway: 1/4”,Teeth: 22.(Made of Brass / Bronze material).

780-262 7030631668344SM1686806YP

Shear BoltsFor dual stage snowblowers / snowthrowers.Size: 1-5/8” L X 1/4”-20 threads.

780-264 7030631668344SM1686806YPBriggs# 703063


780-260 1501216 / 1501216MA / 301172 3943 / 3943MA / 500026MA580239MA / 73826MA / 9524MAMT1501216MA301172 / 7097173754

Shear BoltsFits 22”, 23”, 24”, 25”, 27” blowerswith 12” augers. Includes: bolt, spacer washer and nut. Size: 1-3/4” L X 1/4”-20 thread.

780-259 235 (bolt) / 944 (spacer)/ 00235 (nut)301171MA / MJ235 / MJ70971

Shear BoltsFound on many older snowblowers. Size: 2” L X 5/16”-18 thread. Includes: bolt, spacer washer and nut

240-035 6549 / 6549MA

Drive Shaft & Gear Sprocket uses #35 roller chainand has 8 teeth. Overall length: 5-1/8”. (#35 roller chain X 8 Tooth). The outside diameter of the 8 tooth drive gear teeth = 1-1/8” OD approximately. Shaft diameters: .625” (5/8”) OD X .500” (1/2”) keyed OD X .375” (3/8”) OD threaded end. All measurements are approximate. Keyway: .125” (1/8”). Used in conjunction with our 240-955 Friction Disk Conversion Kit.

240-041 6550 / 6550MA

Drive Shaft & Gear Sprocket uses #41 roller chainand has 8 teeth. Overall length: 5-1/8”. (#41 roller chain X 8 Tooth). The outside diameter of the8 tooth drive gear teeth = 1-7/16” OD approximately. Shaft diameters: .625” (5/8”) OD X .500” (1/2”) keyed OD X .375” (3/8”) OD threaded end. All measurements are approximate. Keyway: .125” (1/8”). Used in conjunction with our 240-955 Friction Disk Conversion Kit.





40-29



S S

495-160 530552 / 780151 / 780151MA 530552 / 53744 / 53744MA / 780151 Swisher# 53744 / 53744MA / 780151MA

Oil SealGear box housing seal for both left and right hand sides. Found on Murray / Noma built snowblowers. Size: 1” ID X 1-1/4” OD.

240-043 4062 / 4062MA

Friction Axle Shaft & Gear For Murray /Noma snowblowers. Sprocket uses our 250-027 (#41) roller chain and has 8 teeth. Overall length: 11”. The outside diameter of the 8 tooth drive gear teeth = 1-1/2” OD approximately. Shaft diameters: .750” (3/4”) OD X 9” Long; Shaft ends (both) .500” (1/2”) OD X 11/16” Long.

780-540 Noma# 6177

Wheel Shaft with Gear For older Noma / Canadian / AMF snowblowers. Found on Canadian Small Frame blowers. Complete Shaft Measures: 24-3/4” Overall Length. 42 Tooth Gear measures: 7” OD and uses #41 roller chain. Shaft OD: 3/4”.

240-600 761789 583010 761789MA

Sprocket Hub / Jackshaft Assembly Used on many 2 stage Sears Craftsman / Murray & Noma snowblowers. (2000 thru 2001). Measures: 6” OD (large gear)X 1-3/8” OD (small gear),36 tooth (large), 7 tooth (small),Shaft: 1/2” OD X 9/16” Long (both sides),Overall Shaft Length: 2-7/16”. Uses our 250-027 (#41) or 250-019 (#40) roller chain.

1/2”dia.

1/2”dia.

9/16”9/16”

240-601 583016761804761804MA

Sprocket Hub / Jackshaft Assembly Used on many 2 stage Sears Craftsman / Murray & Noma snowblowers. Measures: 6” OD (large gear)X 1-3/8” OD (small gear),36 tooth (large), 7 tooth (small),Shaft: 1/2” OD X 3/8” Long then it steps up to .466” OD X 3/16” (both sides), Overall Shaft Length: 2-7/16”. Uses our 250-027 (#41) or 250-019 (#40) roller chain.

780-118 302565 (4) pcs. / 57121 (2) pcs.

Paddle SetFits 20” snowblower. For model: C2030-010 and Craftsman 20” snowblower C950-52103 models. Square paddles are1-3/4” W X 3-3/4” LX 1/4” Thick. Half round paddles are 11-1/8” OD X 1/4” thick. Half round paddles have (6) mount holes. (Use with our 780-088 scraper bar)

780-088 302418 / M94511 / 53688547

Scraper BarFits Noma, Sears and John Deere 5 Hp models. Size: 20-15/16” L with (4) 5/16” ID mounting holes on 6-3/4” centers. (Use with our 780-118 paddle set)

780-287 85105

Skid PlateFor snowblowers. Size: 5-7/8” Overall length X3” HT, (2) 3/8” X 2-3/16” long;mounting slots on 2-1/2” centers. Center hole: 5/8” OD.

780-288 780061760061MA301380E7011740718HMA301380E717MA

Skid PlateFits models: 1695557 - C950-52846-0, 1695558 - C950-52847-0. Size: 80mm / 3-3/16” Overall length X 76mm / 3-1/16” HT, (2) 9mm slots X 40mm L on 50mm / 2” centers.

3/16” 3/16”

.466” dia.466” dia

1/2”dia.

1/2”dia.

3/8”3/8”

40-30



S S

780-284 70379827037982YP

Skid PlateFor Murray and Snapperbrand snow throwers.Size: 5” L X 2-1/2” W X 1-1/4” HT;(2) mounting slot on 3” centres. (Painted RED)

285-043 51477

Traction Spring For Noma / Canadiana. Found on older snowblowers. Measures: 5-1/16” overall length, Coil Length: 3-1/4”, Coil diameter: 1/2”

285-044 318468 318468MA 7030 Simplicity# 723379

Tension Spring For chute. Found on many Murray / Noma / Canadian and Simplicity snowblowers. Also found on Craftsman Dual Stage model C950-52313-3 (2005) etc. Measures: 3-3/4” overall length, Coil Length: 2-3/8”, Coil diameter: 1/2”.

285-045 313855 / 313855MA 53710 / 53710MA

Clutch Return SpringFound on manyMurray / Noma / Canadian snowblowers. Models: 826, 1026 and 1032. Measures: 2-3/4” overall length, Coil Length: 1-5/8”, Coil diameter: 1/2”.

285-046 1673 / 1673MA 585884 / 585884MA

Auger Clutch SpringFound on manyMurray / Noma snowblowers. Measures: 5-1/2” overall length, Coil Length: 3-1/2”, Coil diameter: 3/4”.

780-544 1401 / MJ1401

Fan Shaft / GearboxInput Shaft, Fits Noma and Murray snowblowers. Size: 19-3/16” L X 7/8” OD (large end) X 3/4” OD (small end), (2) 1/4” holes on 3/4” centers, (1) 3/16” keyway for woodruff key and (1) 3/16” keyway - 2-5/16” long

780-543 50660 / 577412 / MJ577412

Impeller / Fan ShaftFits Noma and Murray snowblowers.Size: 19-1/4” Overall Length (7/8” OD X 15” long, 3/4” OD X 4-1/4” long) Large diameter end (7/8” OD) has a 3/16” keyway - 2-1/4” long, and (2) 1/4” holes measuring 3/4” centre to centre. Small diameter end (3/4” OD) has (1) 3/16” hole

290-000 Tecumseh# 35438

Choke Knob - Snowblower Found on various CRAFTSMAN,CUB CADET, LAWN BOY, MTD, MURRAY,NOMA / CANADIANA and TORO Snowblowersequipped with TECUMSEH engines.Size: 1-1/4” OD X 1-1/4” HT. (Red Plastic).

290-112 780232 / 780232MA 50877 / 51223 / 53943

Throttle ControlFound on Ariens, Murray / Noma snowblowers. Conduit length: 30-1/4”, Inner wire length: 33”, Conduit size: 3/16”, Inner wire size: .055”, Wire travel: 1-3/4”.

285-708 1501122 / MA Control CableLower Drive Cable. Found on Murray / Noma snowblowers. Overall Length: 12-3/4”, Cast Z-Bends on both ends.

285-709 1501123 / MA Clutch CableFound on Murray / Noma snowblowers. Overall Length: 30-1/2”, Cast Z-Bends on both ends.

285-589 1502113 / MADrive Control Cable For Murray / Briggs and Stratton snowblowers. FR-DR P7 5-13B. Overall Length: 31-1/4”, Cast Z-Bends on both ends.

40-31



S S

285-710 1501124 1501124MA 762259MA 1501124MA 762259MA

Auger Clutch CableFound on Murray / Noma snowblowers. Overall Length: 32-3/4”, Cable Length: 31”.

285-711 1501452 1501452MA501452MA

Drive CableFound on Murray / Nomasnowblowers. Overall Length: 35-3/4”, Cable Length: 34”.

285-595 1580 / 1580MA

Clutch Drive Cable For Murray / Noma snowblower. Fits Small Frame snowblower models:523, 825 etc. Overall Length: 32-5/8, Cable Length: 27-5/8.

285-608 1579 / 1579MA

Clutch CableFits small frame Noma snowblowers. Models: 523, 825. Overall Length: 28-1/4”, Cable Length: 23-3/4”

285-712 339496 / 339496MA

Chute Control Cable For Murray / Noma snowblowers. Measures: 50” Overall Length, Conduit Length: 43”, Wire Travel: 6”

285-597 4052 / 4052MA / MJ4052780059 / 780059MA / MJ780059

Chute Control Cable For Murray / Noma snowblowers. Size: 59-3/8” Overall Length, Conduit Length with boththreaded end: 52”,Wire Travel: 5-1/2”

287-002 761775 / 761775MA

Chute control cable For Murray / Briggs and Stratton snowblowers. Measures: 63-3/4” Overall Length, Conduit Length: 57-1/2”, Wire Travel: 3-1/4”, Eyelet hole ID: 5/16” with a Cast Z-Bend on the other.

287-001 761131 / 761131MA

Chute control cable For Murray / Briggs and Stratton snowblowers. Measures: 69-1/2” Overall Length, Conduit Length: 62”, Wire Travel: 5-1/4”, Eyelet hole ID: 5/16”.

285-707 579856MA MC579856 579856

Traction CableFound on Murray / Noma snowblowers. Overall Length: 6-5/8”, Cable Length: 5-1/8”.


Wire StopUsed to repair control cables.Size: 1” overall length.3/8” OD steps down to 1/4” OD. (2) wire locking screws.


Wire Stop with 1/4” EyeletUsed to repair control cables.Size: 1” overall length. 1/4” ID eyelet.(1) wire locking screw.


Wire Stop with Z-BendUsed to repair control cables.Size: 15/16” overall length with1/8” diameter Z-bend. (1) wire locking screw.

SIMPLICITY875-066 1663885Snowblower belt (6 rib style)Fits Simplicity single stage. Model: Snow-Whiz 220 (1979 thru 1984), Snow Buster 220 (1979 thru1984). Belt type: 6 rib X 34” (also known as multi rib). Size: 6 RIB (9/16”) W X 34” L


40-32


S S

285-044 723379Tension Spring For chute. Found on many Murray / Noma / Canadian and Simplicity snowblowers. Also found on Craftsman Dual Stage model C950-52313-3 (2005) etc. Size: 3-3/4″ overall length,Coil Length: 2-3/8″, Coil diameter: 1/2″.

SNAPPER875-727 2-9604

7029604Blower beltFits models: 3200 series snowblowers; 3201-3203 and C3203 single stage series 3. Size: 3/8” W X 33” L

240-900 1-0765 / 7010765 / 7018782Case# 2289 Case# C22891Gilson# 32222Gilson# 18915

Drive DiscFits Snapper Snowblowers andalso found on Lawn & Garden equipment.Size: 6” OD X 5-3/8” ID. (Use with our 240-325 brake lining)

240-325 5-31035-7423

Brake LiningMade of non asbestos material. For use with our 240-900 drive disc. Can be use with other 6” OD Drive Discs.

240-930 1-72267017226

Drive DiscFor 4, 5 and 8 Hpsnowblower models: 4222,5222, 5242, 7222, 7242 and 8264; also found on somesmaller Toro snowblowers. Size: 4-1/2” OD X 1” ID with (4) 1/4” bolt holes

240-275 1-0927 / 2-3364 7023364

Drive RingFor Snapper self propelled mowersalso fits 22” and 24” 2-stage snowblower models. Measures: 4” OD X 3” ID X 1/2” HT - Made of rubber

780-205 1-38659-1550

Shear BoltsFor many snowblower models.Size: 2” L X 5/16”-18 threads.


780-262 1-5257 / 703063Simplicity#’s1668344SM1686806YP7015257YP

Shear BoltsFor dual stage snowblowers / snowthrowers.Size: 1-5/8” L X 1/4”-20 threads.

780-264 1-5257 / 7030631668344SM1686806YP7015257YPSimplicity# 1668344SMSimplicity# 1686806YP


120-212 16325 / 24507 / 7034212

In Line Fuel Shut-off Fits 1/4” ID fuel line. Red knob opens and closes easily with a quarter turn. (Composite material)

780-044 2-4619 / 2-8425 / 7035947 / YP

Scrapper Bar

Fits Snapper models: LE-17 and LE317 snowblowers. Size: 16-11/16” L X 2-1/16” W X;Mounting holes: 1/4 X 3/8” Oblong.

780-043 6-1215 706121570761215

Paddle SetFits 17” for model: LE-17 snowblower.

780-045 6-0631 / 7060631 / 7060631YP

Paddle SetFits Snapper models:3200 and 3201.

Rectangles measure: 3-1/2” X 1-9/16”; Crescents measure: 11-1/2” X 1-9/16” with 6 mounting holes on 2-1/2” centres. (Use with our 780-040 scraper bar).

780-040 1-8637 / 1-8764 / 2-84277018764 / 7028427 / 7028427YP

Scraper BarFits Snapper models: 3200 and 3201 snowblowers.Size: 19-3/8” L X 2-1/16” W X; Mounting holes: 1/4”



SIMPLICITY continued SNAPPER continued

40-33


S S

780-284 3-798270379827037982YP

Skid PlateFor Murray and Snapperbrand snow throwers.Size: 5” L X 2-1/2” W X 1-1/4” HT;(2) mounting slot on 3” centres. (Painted RED)

TECUMSEH120-213 35857

Fuel Shut OffUsed on many snowblowers. Fits 1/4” fule line - 90 degree style Red knob opens & closes easily with a quarter turn.

105-205 32401

Muffler For 4 thru 7 Hp horizontal engines. Found on Snowblowers with horizontal engines. Fits models: H40 thru H70, V50, V60, V70and TVM140.Bolt on style. Size: 2-13/16” W X 5-5/8” L X 1-5/8” HT. (Uses our 485-904 mount gasket)

105-213 32648A 33697A 35771

Muffler For 4 thru 7 Hp horizontal engines. Fits models: HS40, HS50, LAV40, LAV50, H60,H70, TVS75 thru TVS120 and TVXL105. Bolt on style.(Uses our 485-714 mount gasket)

105-114 33280 / A / B

MufflerFor 7 thru 10 Hp engines. Fits models VM100,TVM170 thru TVM220 and HM70 thru HM100 & VM100. Size: 3-3/4” W X 5-1/2” L X 2-3/8” HT. (Use with our 485-924 exhaust gasket). Note: requires (2) 5/16”-18 X 3” long bolts - NOT included)

105-365 3505694058

Muffler For 8 thru 10 Hp engines. Found on newer style Snowblowers, Snow King etc. Heavy gauge steel construction with bracket welded in place. (Use with our 485-924 exhaust gasket). Note: requires (2) 5/16”-18 X 4” long bolts - NOT included)

485-924Exhaust GasketFits models: 130200, 133700, 193700, 196400 and 197400 series. (Fits our 105-114 & 105-365 mufflers for Tecumseh)

110-003 650729

Muffler / Exhaust BoltSize: 5/16-18 X 3” Long. (Use with our 105-114 muffler).

110-004 792093

Muffler / Exhaust BoltSize: 5/16-18 X 4” Long. (Use with our 105-365 muffler).

290-000 Tecumseh# 35438

Choke Knob - Snowblower Found on various CRAFTSMAN,CUB CADET, LAWN BOY, MTD, TOROSnowblowers equipped with TECUMSEH engines.Size: 1-1/4” OD X 1-1/4” HT. (Red Plastic).

619-640 632107 / 632107A 640084 / 640084B

Carburetor Fits models: HSSK50-67388S, HSSK50-67368R, HSSK50-67317N, HSSK50-67376P, HSSK50-67334P, HSSK50-67334L, HS50-67225E, HS50-67183, HS50-67267J,HS50-67225F, HS50-67074C, HS50-67008C,HSSK50-67377S, HSSK50-67272P, HSSK50 67366M, HS50-67259H, HSSK50-67272P, HSSK50-67364R, HS50-67248F, HS50-67175C, HS50-67074C, HSSK50-67364S, HSSK50-67360N, HSK40 & LH195SP. (This is an aftermarket carburetor)

619-655 640152 / 640152A

Carburetor Fits models:HM80, HM100-159402P, HM100-159409P, HM100-159409P.

(This is an aftermarket carburetor)

619-642 632334A

Carburetor Fits models: HM80-155448P,HMSK80-155418S, HM80-155418P, HM80-155310N, HMSK80-155545T, HMSK80-155556T, HM80-155355P, HM-155445, HMSK80-155480S, HMSK80-155497S, HM80-155390P, HM80-155209J, HM80-155132H, HM80-155128F, HM80-155245J, HM70 & HM80. (This is an aftermarket carburetor)

SNAPPER continued TECUMSEH continued

40-34


S S

619-656 640260A / 640260B

Carburetor Used on models: 143.001001, 143.008001, 143.008501, 143.009005, 143.009007, 143.009009. Fits engine models:HM80-155236 / 375, 406, 477,481, 482, 483, 521, 564, 571, 578,603, 622, 623, 624, 625, 628, 630, 638, 651, 688T. HM90, HM100-159090, 287, 291, 317, 351, 358, 375, 376, 377, 379, 380, 383, 386, 400, 402 thru 405, 409, 411, 413, 416, 421, 423, 424, 425, 430, 435, 436, 446, 449, 450, 452, 454, 461 thru 465, 467, 469, 475, 481, 483, 484, 486, 487, 491, 493, 528, 537 thru 540. LH318XA and LH358EA. (This is an aftermarket carburetor)

619-659 640052 / 640054 640349

Carburetor Fits models: HMSK80, HMSK85, HMSK90, HMSK100, HMSK105, LH318SA, LH358SA. Replaces Mfg. # 5313, 5002 and 5036. (This is an aftermarket carburetor)

For more aftermarket carburetors to fi t TECUMSEH - see our main

catalogue “SECTION 10”

520-320 631978

Carb Repair kitFits Tecumseh builtcarburetors. Fits models: ECH90, ECV100 thru ECV120, H22 thru 80, HH40 thru 70,HM80, HS40, HS50, LAV25 thru 50, TVS70 thru 120,TVXL105, 380, 660, 670, V, VH40 thru 70.

520-114 631029 631240

Carb Repair kitFits Tecumseh built carburetors.Fits models: H25 thru 50, LAV25thru 35, HS, HM40 thru 70, Vand VH50 thru 70.

520-338 31840 / 631840

Carb Repair kitFits Tecumseh built carburetors. Fits models: H25 thru 70, LAV25, LAV30, HS, HM40 thru 70, V, VH40 thru 70, TVS105 and HH60.

520-247 631584 631839

Carb Repair kitFor models: H25 thru H70, LAV25 thru 35, HS,HM40 thru 70V, VH50 thru 70.For 2 thru 7 Hp engines.

520-239 631782

Carb Repair kitFits models: H25 thru H70, LAV25 thru 35, HS, HM40 thru 70, V, VH50 thru 70, VM80, H80, HM80 and TVM140.

520-336 632347

Carb Repair kitFits models: HH100, HHM80, HMSKSK, HM70, HM80, HM90, HM100, OHM120, OHSK120, OHV125, OVM120, OXVL120,TVM170, TVM195, TVM220, TVXL195, TVXL220, VH100.

For more Carburetor Kits see main catalogue “SECTION 10”525-591 631700Carburetor Bowl For float style carburetors without bowl drain. (aluminum material) Size: 13/32” ID X 2.193” OD X 1.155” HT

525-526 631867

Carburetor BowlFor float style carburetors without bowl drain. (aluminum material) For use with our 525-240 float Size: 11/32” ID X 2.193” OD X 1.155” HT

485-862 631028Carburetor Bowl Gasket Fits all Tecumseh made carburetors. (Large bowl) Fits float bowls: (Banta# 525-526) and (Banta# 525-591)Size: 2-1/16” diameter

485-870 27109

Carburetor Bowl GasketFits Walbro & Carter made carburetors. (Large bowl) Size: 2-3/8” diameter



TECUMSEH continued TECUMSEH continued

40-35


S S

485-888 30356

Carburetor Bowl Gasket Fits Walbro & Carter madecarburetors (small bowl). Size: 1-15/16” diameter

485-755 33263 33861

Carburetor Mount GasketFits Tecumseh models: VM70 thru VM100, V80and HM70 thru HM100.

525-240 632019

Carburetor FloatFits most float carburetors. Use with our 525-526 and 525-591 carburetor bowls and our 525-220 bowl drain assembly. Size: 1-3/4” OD X 1” ID X 7/16” HT

525-212 631021 / 631021A

Needle & Seat Kit. Fits Tecumseh models: LAV, V, VH, VM, TNT, TVS, H22 thru H80, HH40 thru HH70, HM80 thru HM100, HS, 638, 650 & 670. (Float type carburetors)

525-213 631021B

Needle & Seat KitFits Tecumseh carburetor.

(Same as our 525-212 but includes float bowl gasket and washer)

120-210 632047 632047A

Primer Bulb FFits Tecumseh models:LAV, V, VH, H22 thru H35,HS40, 638, 650 and 670,also TNT100, TNT120,ECV100, ECV105, ECV110,ECV120; CA-631849A thru CA-632795 carburetors;TEC-632804, TEC-640173 & TEC-640196.Size: 1-1/16” OD X 3/4” HT.

120-807 632694A

Primer Bulb For VLV and ELV engines. (with vented hole)Fits carburetor models: 632646, 632669, 632670, 632681 and 632756.



120-289 36045 36045A0036045A

Primer Bulb For Vector carburetors.Includes lock washer. Fits Vector carburetor models VLV-50, VLV-60,VLV-65, VLV-66, VLV-126 and TVS90.

120-290 23120003 / 321802A32184 / 570442A570629A / 570629B

Primer Bulb Assembly Found on many snowblowers.(Non Original Tecumseh Part)

120-298 Tecumseh# 570682A

Primer Bulb Assembly With 2 tabs on back for mounting. Found on manySnowking snowblowerapplications, as well as many China engine applications. Fits models: AV520, HMSK100, HMSK105 and HMSK110. NOTE: Two images shown for reference

125-049 35355John Deere# M79340

Gas CapFits Premier series engines. Red plastic gas cap Size: 1-15/16” diameter.

125-050 36246 / 3784437845 / 740041B

Fuel cap For Tecumseh. Size: 1-3/4” diameter (Red)

125-336 33679

Rubber fuel tank bushingFor use on many applications. Fits 33/64” diameter fuel tank holes.Size: .356” ID X .615” OD

120-003 34279 / 34279A 34272B / 740003B

Fuel Filter Fits 1/4” ID fuel lines (80 micron). Clear plastic with polymer treated paper screen. Fits Tecumseh models: HM80, HM90, HM100, OHV125, OVM120, OVXL120, TVM195, TVM220 and TVXL220.

120-117 26460

ClampFits 7/16” OD fuel line. (green)


40-36


S S

150-736 33290C / 33290D / 33290E /33517B / 34601C / 35251 / 35601A

Starter Motor - 120 V (Standard Duty)This 120 volt electric starter motor kit fit the following Tecumseh engine models: HSSK40 thru 55, H30 thru 35, HS40 thru 50, HSK35, HSK40, LH195, OH195, OHSK50 thru 70. > 9 tooth gear. KIT INCLUDES: Starter, starter button, hardware and extension cord. (For the HEAVY DUTY version see our 150-742)

150-742 33290C / 33290D / 33290E33517B / 34601B / 35251 / 35601A

Starter Motor (Heavy Duty)This 120 volt electric starter motor kit, fits the following engine models: HSSK40 thru 55, H30 thru 35, HS40 thru 50, HSK35, HSK40, LH195, OH195, OHSK50 thru 70. > 9 tooth gear. KIT INCLUDES: Starter, starter button, hardware and extension cord. (For the Standard Duty version see our 150-736)

150-737 33228D33328D33328E

Starter Motor 120 V (Standard Duty)This 120 volt electric starter motor kit, fits thefollowing engine models: H50 thru 70, TVM125 thru 140, HSK50 thru 70, HH60 and HMSK105. For 7 Hp Snow King engines. > 16 tooth gear.KIT INCLUDES:Starter, starter button, hardware and extension cord.

150-740 33329C / 33329D / 33329E33519A / 33542A / 35096 37000 / 88921 / 88922 88923 88924 / 88925

Starter Motor 120 V (Heavy Duty)This 120 volt electric starter motor kit, fits the following engine models: HMSK70 thru 100, HMSK105, HMSK110, HM70 thru 100, OMH110, LH-318SA, OH-318SA, OHSK-80, OHSK-90, OHSK-100, OHSK-110, OHSK-120, OHSK-125 and OHSK-130. For 8, 10, 11 and 12 Hp Snow King engines.> 16 tooth gear.KIT INCLUDES:Starter, starter button, hardware and extension cord.Note: Also Popular on Honda GXV340 & GXV390 Propane Floor Care / Buffer Equipment.

150-047 3343237050 / 37052A

Starter Drive GearReplacement starter gear for our150-712 (12 Volt) , 150-737 and150-740 (120 Volt) starter motors. > Number of Teeth: 16

150-065 37050 / 37052A

Starter Drive KitReplacement starter drive kit for our150-712 (12 Volt) and 150-737 and150-740 (120 Volt) starter motors. > Number of Teeth: 16.Includes: (1) Gear (Will replace Tecumseh# 33432), (1) Drive Nut (Will replace Tecumseh# 33433A) and (1) Retainer Snap Ring (Will replace Tecumseh# 33842). For Gear only see our 150-047.

150-741Hardware Kit For our 150-738 and 150-740.Used to mount 120 V electric startermotors found on Tecumseh engines.

150-743Hardware Kit For our 150-737. Used to mount 120 Volt electric startermotors found on Tecumseh engines

150-744Hardware Kit For our 150-736 and 150-742. Usedto mount 120 Volt electric starter motors found on Tecumseh engines.


40-37


S S

150-003 590420A590706

Starter Rewind Assembly

Fits models: LAV, TVS, H,HS25 thru HS40, AH600, AV520, ECV, HH, TVXL105, HXL35 and OVRM40 (small and medium frame engines), TVM125 & TVM140. > (4) bolt mounting pattern. Fits most engines built before 1990. Fits most Snow King applications.

150-004 590646 / 590648 / 590742 / 590787


Fits models: HSSK50 and HSK70,also some AV, H35, HSK, HSSK, LH and TV085 models. Comes complete with (2) steel starter dogs installed, starter pulley, starter rope and housing. Size: 5-7/8” OD (Base). (4) 1/4” diameter holesand (4) 3/16” diameter holes around the outside.Note: The main difference between our 150-004 and 150-005 is the starter pulley.

150-005 590739


Fits models: LEV80, LEV100, LEV105, LEV115, LEV120, LV148, LV195, OV195, OVRM60, OVRM65, OVRM105, OVRM120, TVS90, TVS100, TVS115, TVS120, TVS600VLV55, VLV60, VLV65, VLV66, VLV126.For 3-1/2 to 4 Hp engines.Size: 5-7/8” OD (Base). (4) 1/4” diameter and (4) 3/16” diameter holes around the outside. Comes complete with (2) steel starter dogs. (None Winter pulley)Note: The main difference between our 150-005 and 150-004 is the starter pulley.

150-006 590732A / 590737 / 590785 / 590086 / 590621 / 590686590694

Starter Rewind Assembly Fits small and medium frame E-Z pull starts.

Used on models: AV520, H30, H35, H40, H50, H60, HS40, HS50, HXL840, LEV90, LEV100, LEV115, LEV120, LV148,LV156, LV195, OH195, OHH60, OVRM50, OVRM55, OVRM60, OVRM65, OVRM120, TVM125, TVM140, TVS90, TVS100, TVS105, TVS115, TVS120, TVS600, TVS840, TVXL840, VLV50, VLV55, VLV60, VLV126, OVRM105, OVRM120, ECV series (Sears), TVS series 90 thru 120 - 1990 production and up.

150-007 590749 / A590789


Fits models:HMSK80,HMSK100 snow engines and HMSK105. For small and medium frame engines. (Snow King applications only). Size: 7” OD; (8) 3/8” OD mounting holes; 2 Steel Cogs. Note: The main difference between our 150-007 and 150-008 is that the 150-007 starter pulley has a raised lip around the starter dogs. It measures 3-1/4” OD X 5/8” HT approximately. Also it has a receiving cup built in for the starter handle.

150-008 590746 / 590788590748 / A


For small and mediumframe engines.Bolt on rewind assembly.(For Non Snow King engines). Fits models: HM80, HM90, HM100, LH318XA, LH358EA, OH195, OH318, TVM220, OHH50, OHH55, OHH60 and OHH65. Size: 7” OD; (8) mounting holes; 2 Steel Cogs

150-169 590478590413A

Starter Pulley Fits our 150-003. (3) dog style pulley,will also replace (1) dog style. Fits models: TVS & ECV series,H30 thru H70, LAV30 thru LAV50,V50 thru V70, TVM125 and TVM140. Size: 4-3/8”diameter.

150-616 590616590618590618A

Starter Pulley & SpringFits our 150-006. Includes all hardware as shown & starter spring. Size: 5-1/2” OD.

150-618 Fits 150-006Pulley onlySame as our 150-616 but without the starter spring or hardware.Fits our 150-006 rewind assembly. Uses our 155-1038 starter spring. Size: 5-1/2” OD

430-492 35062Starter KeyFits snowblower models: ST524, ST724, ST824, ST1024, ST1028, ST1128, ST1332 and ST1336.Push / Pull key (Red Plastic)


40-38


S S

140-103 590574

Starter Handle“D” style mitten grip handle.Used on many snowblowers with pull starters.

For more TECUMSEH “ Starter Rewind Assemblies”

see our STARTER PARTSSECTION 42

TORO / WHEEL HORSE780-582 201-730

Axle Bearing / Wheel Mount Support for Toro snowblowers. Found on many 524, 624, 724 and 824 models. Bronze Bushing measures: 7/8” ID X 1-1/8” OD X 3/4” HT. Aluminum Plate measures: 3-1/4” L X 1-3/4” W X 1/4” Thick. (2) 3/8” ID mounting holes on 2-5/16” centers.

230-250 251-224

BearingFits Axles on Snowblowers. Fits models 310-230 thru 310-960. (Bearing# SB205-14)Size: 7/8” ID X 2-1/32” OD X 1-1/16” HT

230-060 112-0423 / 38-7820100-1048 / 109966

BearingFits Toro Snowblowers. Fits models S-200, S-620, CCR2000 and CR20. (Bearing# 6203-2DRS-LG)Size: .669” ID X 1.575” OD X .471” HT.

230-300 251-207Input Shaft Support BearingFits models: 824 and 932. (Bearing# 1635-2RS and SCO493LU)Size: 3/4” ID X 1-3/4” OD X 1/2” HT

225-896 12-8789 / 26-6100 / 63-3450Spherical Bushing For Impeller shafts on Snowblowers. Fits models 521 thru 824. Size: 7/8” ID X 1-45/64” OD X 1-1/4” HT

875-225 3817575-9010

Auger Drive Belt Fits snowblower model: Powerlite, 38170, 38171, 38175 and 38176. Size: 3/8” W X 29-1/4” L

875-980 37-9080

Drive BeltFits models: 3521,421, 521 and 522.. Size: 3/8” W X 29-7/8” L

875-0780 120-3893

Wheel Drive Belt.Fits TORO snowblower models:724OE, 726OE and 826OEPower Max snowblowers.Size: 3/8” X 31-5/8” L. (Type 3).

875-192 71-538071-5381

Drive Belt Fits snowblowers. Fits model: CCR1000 Snowblower.Size: 3/8” W X 34.7” L

875-10210 26-9672

Drive Belt Snowblower auger drive belt.Fits Toro models: 622, 622E, 622R, 722 and 724; built 1993 to present. Found on many 2 stage snowblowers..Size: 1/2” W X 29-5/8” L

875-064 63-2951

Traction belt For Toro snowblowers. Size: 1/2” W X 32-1/2” L.

875-0180 106-4498

Drive Belt Fits Toro Power Max snowblowers.Size: 1/2” W X 42-5/8” L. (Type 2) Raw Edge.

875-0888 108-4921

Drive Belt.Fits TORO snowblower models:Power Clear 621 and Quick Clear6053. Found on TORO models:38578, 38581 and 38588 Snowthrowers.Size: Multi Ribbed (3/8”) W X 34-7/8” L. (Type 6).

875-0758 117-7733

Auger Drive Belt.Fits TORO snowblower models:Power Clear 180, 418 ZR, 518 ZRand 518 ZE. Found on TOROmodels: 38272, 38282, 38472, 38473 Snowthrowers.Size: Multi Ribbed (7/16”) X 32” L. (Type 6).

TECUMSEH continued TORO / WHEEL HORSE

40-39


S S

875-939 95-6151

Auger Drive Belt.Fits models: CCR2400, CCR2450, CCR2500, CCR3000, CCR3600 and CCR3650. Size: 5 RIB (1/2” W) X 33-7/8” L

875-060 25-6430

Drive Belt (multi-rib)Fits models: S200, E200, 200E, 620, 620E, S620 and CR20. Size: 6 RIB (9/16”) W X 33” L

875-066 55-9300

Drive Belt (multi-rib)Snowblower Auger Drive Belt Fits snowblower model: CCR2000.Size: 6 rib style (9/16”W) X 34” L

875-0023 121-6622

Drive Belt (multi-rib).Fits TORO snowblower model:Power Clear 721 snowblowers.Found on TORO models: 38741,38742, 38743, 38744 Snowthrowers.Size: Multi Ribbed (9/16”) W X 35-1/2” L. (Type 6).

For more V-Belts - see our“BELTS - O.E.M. Replacement” section 05

240-930 37-65701-7226

Drive DiscFits on smaller Toro units. Size: 4-1/2” OD X 1” ID, (4) 1/4” mounting bolt holes.

240-920 40-8170

Drive Disc Fits on larger Toro units.Size: 6” OD X 1-3/4” ID, (4) mounting bolt holes.

280-980 93-1614Aetna# AG2318-A

Sprocket IdlerFound on Toro / Wheel Horse single stage snowblowerattachments. These snowblower attachments have been around for years. Mainly in the 37” wide variety. This sprocket idler acts as a tensioner for the main auger drive chain.Size: 3” OD X .516” ID (13mm ID) X 18 Tooth gear (Two pictures shown for reference)

120-436 9802171-5960

In-Line Fuel Filter 23 micron. Our most popular in-line fuel filter. Used on small mowers and tractors. Fits both 1/4″ and 5/16″ ID hose. Not for use with LPG, LNG or gasohol blends of more than 30% methanol. Size: 4-1/4″ overall length.

430-523 29-556040-5940

Stop Switch For models: S200, S620, 38120 & 38130 snowblowers. Also fits 32”, 36”, 37”, 44”and 52” mid sized commercialmowers with pull start. (2) position, (2) terminal,5/8” mounting stem.

150-023 28-9110

Starter gear pinion For Toro 2 - cycle snowblower models: S200 and S620. 16 Tooth gear

125-680 42-0680

Gas CapFits S200 & S620 Snowblowers.Size: 1-1/2” diameter, vented gas cap.

780-007 23-3730

PaddleFits models S200 and S620. Size: 17-5/8” long X 2-5/8” wide (7) 1/4” mounting holes on 2-7/8” centers. (Use with our 780-016 scraper bar)

780-106 23-3170

Scraper BarFits Toro models:CR-20, CR20R, S-200 and S-620. Size: 19-5/8” L X 1-3/4” W (Use with our 780-007 paddles)

780-034 80-066084-1980

PaddleFits model 16” Powerlitesnowblower. Size: 16-15/16” Long, (7) mounting holes(Use with our 780-027 scraper bar)

TORO / WHEEL HORSE TORO / WHEEL HORSE

40-40


S S

780-081 84-1980

Snowblower paddle. Made of TICOR material from recycled tires. Resist aging and abrasion,long lasting. Can withstand extreme temperatures. Environmentally friendly construction. USA Made. Similar to our 780-034. Fits Toro model: 16” Powerlite snowblower. (7) mounting holes,Size: 16-15/16” L.

(Use with our 780-027 scraper bar)

780-027 75-8780

Scrapper BarFits model:Powerlite snowblower. Size: 15-1/2” L X 2-1/4” W

(Use with our 780-034 & 780-081 paddles).

780-084 54-9921104-2753

PaddleFits model:CR1000 Snowblower.Size: 21-1/2” L X 2-3/4” W (8) 7/16” ID mounting holes on 3-1/16” centers.


780-114 71-5390

Scraper BarFits model: CCR1000 Blowers. Size: 19-1/2” L X 2” W, (3) 1/4” X 3/8” ID mounting holes, 8-1/8” centers.

(Use with our 780-084 paddles)

780-080 55-925199-9313

PaddleFits model: CCR2000 Snowblower. Size: 22” L X 3” W (8) mounting holes on 3-1/8” centers.


780-110 55-8760

Scraper Bar Fits models: CCR2000, CCR2400, CCR2450, CCR2500, CCR3000, CCR3600 and CCR3650 snowblowers. Size: 19-1/16” L X 2” W (3) mounting holes on 8-1/2” centers.

(Use with our 780-046 and 780-080 paddles)

780-046 55-925099-931388-0771

PaddleFits models: CCR3650, CCR3000 & 2450 Snowblowers. Size: 22” L X 3” W (8) mounting holes on 3-1/8” centers.(Use with our 780-110 scraper bar)NOTE: Part# 780-080 and 780-046 are exactly the same except for the cut outs on the 780-046.

780-082 99-9313

Snowblower paddle. Made of TICOR material from recycled tires. Resist aging and abrasion, long lasting. Can withstand extreme temperatures. Environmentally friendly construction. USA Made. Similar to our 780-046. Fits Toro models: CCR3650, CCR3000 and 2450 Snowblowers. Measures: 22” L X 3” W, (8) mounting holes on 3-1/8” centers. (Use with our 780-047 scraper bar). NOTE: Part# 780-080 and 780-046 are exactlythe same except for the cut outs on the 780-046.

780-042 108-4884

Scraper BarFits snowblowers (2008-10),Power Clear 621R, 621E, 621ZR, 621ZE, 621QZR and 621QZE (2012-2014), Power Clear 721 R-C (2014), Quick Clear CCR 6053 (2008-2010), Quick Clear 6053R (2011-2014) and Quick Clear 6053ES (2013-2014).Measures: 19-5/8” L X 2-11/16” W; (2) 9/16” ID holes. (Use with our 780-046 and 780-082 paddles).

780-109 117-7700

Paddle - SnowblowerFits models: Power Clear 180 and 418 Snowblowers. Measures: 18-1/2” L X (2-3/8 to 2-1/2”) W, (6) 5/16” mounting holes; Thickness: .290”, does not include wear hole. (Use with our 780-079 scraper bar).

780-079 117-7717

Scraper BarFits models: Power Clear 180, Power Clear 418 and 518. Measures: 17-1/8” L X 2-3/16” W, (3) mounting holes. (Use with our 780-109 paddle).

780-111 119-7601-01

Scraper BarFits models: Power Max 724OE snowblowers.Measures: 23-1/4” L X 2-1/8” W, (2) outside mounting holes on 5-7/8” centres with the three inner mounting holes on 4-7/8” centres.


40-41


S S

780-112 105-9976-01

Scraper BarFits models: Power Max 726TE, 726OE, 826, 826LE, 826OE, 826OXE, 926OXE and 6000 snowblowers. Measures: 25-3/16” L X 2-3/4” W,(5) mounting holes on 5-7/8” centers.

780-113 120-3872-01

Scraper BarFits models: Power Max 726OE, 826OE and 826OTE snowblowers.Measures: 25-1/4” L X 2-1/8” W,(2) outside mounting holes on 5-7/8” centres with the three inner mounting holes on 4-7/8” centres.

780-008 100-9872

PaddleFits models: 38600,38601, 38602Snowthrowers,24” Snow Commandersnowblower, 7 Hp, R-Tek, 2 cycle.Measures: 22-5/16” long X 11” wide;(6) .415” mounting holes.(Note: Requires 3 per machine).

780-238 40-816040-8160-01

Skid Pad / Plate

Fits Snowblowers. Size: 5” L X 2-3/4” W, (2) 5/16” X 1-5/8” long mounting slots on 2” centers.

780-287 74-1440

Skid Pad / Plate

Fits snowblowers. Size: 5-7/8” Overall length X 3” HT,(2) 3/8” X 2-3/16” long mounting slots on 2-1/2” centers. Center hole: 5/8” OD.

780-236 20-2840

Skid Pad / Plate

Fits Toro Snowblowers. (Made on Plastic). Found on 524, 624, 724, 826, 832, 1032 and 1132 models. Measures: 5-7/8” L X 3-3/4” HT, (2) 7/16” X 2” long mounting slots on 3” centers.

780-026 52-706039-1540

Air VaneFits Toro Snowblowers. Fits models: S200and S620. Made of black plastic

YAMAHA230-060 9330620331

BearingFound on Yamaha snowblowers. (Bearing# 6203-2RS) Size: .669” ID X 1.578” OD X .475” HTBearing with retainer ring use our Part# 230-274.

780-257 7Y65164701 7Y65164702 901850612200

Shear Bolt Fits Yamaha Snowblowers. Size: 1-15/16” (49mm) L X 6 mm thread, 10mm shoulder

NOTES:


40-42

Documents

Small Engine Parts & Accessories UNIVERSAL … · Wheel Bearing Fits Snowblower model: 924. (old style). Carrier shaft bearing. ... and 24” snow attachments; 901011 20” rear tillers