L A N D I A A G R O

Engineered to last www.LandiaWorld.com

• Pumping• Mixing • Automatic Control

Slurry Solutions- For Mink Farming...

Solution with Reception Tank

Solution with Dry Pit

Solution with Reception TankThe slurry flows from the stables into the in-ground Reception Tank. The submersible pump can be used for two purposes:· Pumping to the Storage Tank· Back flushing of slurry pipe system

Before pumping to storage tank the submersi-ble mixer ensures a homogenous condition of the slurry. Pump- and mixer either manually or automatically operated.

Solution with Dry PitCompared to a large reception tank several advantages can be achieved by applying a dry installed Landia MPTK Slurry Pump in a Dry Pit, i.e the displayed PE-Pit.

Advantages: · No slurry reception tank and hence reduced odour impact. · Less space requirement = smaller footprint.· One single pump can serve several slurry pipes and channels.· The Landia PE-Pit is water tight and comes as a complete package, ready for installation. · The MPTK-Pump can also be installed in a traditional Concrete Pit.

Sign.:

Dwg.no.:

Scale: Date:KNHL

Mixer and submersible pump

From mink cages

Mixing of Storage TankBefore starting to empty the Storage Tank it is important that the slurry is well mixed – in a homogenous condition.

A submersible mixer installed inside the tank is the ideal solution ensuring sufficient mixing capacity whenever needed.The mixer is either manually or automatically operated and can be installed in both open- and covered tanks.

Of course Landia also has suitable pumps for emptying of the Storage Tank.

Efficient Slurry Solutions for Modern Mink FarmsBack Flushing

System

Back Flushing SystemBoth solutions described on page 2 can be extended with ’’Back Flushing System’’.A thin fraction of slurry (after settling) is pumped either from the Storage Tank or the Reception Tank to the beginning of the slurry pipe system hence cleaning this by flushing.

In both cases the pump is lifted into the most waterish part of the slurry for increased flow and flushing.

Mixing ofStorage Tank

Submersible mixer in covered tank

Storage Tank

Back Flushing

Mink Sheds

Ø250 mm or 350 mm

Vent

Valve

Dry Installed Pump

Valve

Transfer Pipe

Pump for Back Flushing

Submersible Chopper Pump Type: DG

The pump is submerged into the slurry and is used for pumping to storage tanks, back flushing and optionally also mixing.All Landia DG pumps are equipped with the unique “knife system” for cutting solids (i.e. fishbones) and hence preventing clogging of pump and pipe system.A wide range of standard and customized installation equipment, pipe systems, hose connections and lifting devices are available.

Slurry Pump for dry installationType: MPTK

The MPTK pump is for in-line installation outdoor or in a dry pit and can handle slurry with a high concentration of solids.The MPTK pump can be equipped with the unique “knife system” for cutting solids (i.e. fishbones) and hence preventing clogging of pump and pipe system.We offer individual pump solutions with a choice of different flanges and connections for steel as well as PVC pipes.

Long ShaftedSlurry PumpType: MPG or TPG

The MPG & TPG pump can pump slurry with a high concentra-tion of solids – significantly more than the “average” slurry pump. The pump design is unique with pump suction from the top and the special auger.All Landia MPG & TPG pumps are equipped with the unique “knife system” for cutting solids (i.e. fishbones) and hence preventing clogging of pump and pipe system.We offer individual pump solutions with a choice of different options such as fixed- or adjustable mixing nozzles, two-way valves, transfer pipe and pump length up to 5.4 m.

Chopper Pumps- since 1950Extremely versatile Chopper Pumps with motors ranging from 0.55 kW to 30.0 kW.The unique pump design with integrated knives prevent the pump from clogging - even in thick slurry with high dry matter content.To read more go to:www.landia.co.uk/pumps

Submersible Propeller Mixer Type: POP

The POP mixer is suitable for various mixing applications in all types of slurry and most types of tanks.The unique 3-blade propeller design offers outstanding mixing performance - even in thick slurry.An extensive range of installation equipment is available both in hot dip galvanized steel as well as stainless steel.

Propeller Mixer- since 1970Extremely versatile mixers with motors ranging from 3.0 kW to 30.0 kW. The unique 3-blade pro-peller design offers out-standing mixing performan-ce - even in thick slurry with high dry matter content.To read more go to:www.landia.co.uk/mixers

Our products are often used in aggressive environments under demanding operational conditions and with long operating times.Therefore, all Landia products are designed under the following principles:

• All components are designed so that they cannot be overloaded

• Spare parts (knives, bearings and sealing systems) are easy to replace

The need for service and maintenance is minimal. When the unit needs to be serviced, the work can usually be conducted directly on site without transport to and from a repair shop.

Serviceand Maintenance

Crane arm

Scale: Sign.: Date:

Dwg.no.:HL 14-03-2013

7212036-brochure

Branch Pipe Hose and stop tap

400L Løftekrog 400G40 400R40 400HR40 Faldlem med skydeplade Faldlem med hængsler Rustfri Rustfri – Galv. Udv. mål (bxl) Indv. mål (bxl) Udv. mål Indv. mål 60 x 49 cm 40 x 40 cm 48 x 47 cm 40 x 40 cm 402L Løftekrog 400PR40 402CG Faldlem for påboltning Nedkastningslem med vandlås Rustfri til grebning eller rensegang Udv. mål Galv. 41,5 x 41,5 cm Udv. mål Indv. mål 65 x 65 cm 58 x 58 cm 168G1 168G2 Topstang 7614000 406R110 406FR110 7614001 406R160 406FR160 7614004 Stophane for PVC-bagskyllerør Stophane for PVC-bagskyllerør Skydeventil for PVC-rør til faststøbning i kanalenderne til påboltning i kanalenderne til faststøbning Rustfri Rustfri Rustfri 7603135 Mål Mål Mål 7603146 for 110 mm PVC for 110 mm PVC for 110 mm PVC 7603157 for 160 mm PVC for 160 mm PVC for 160 mm PVC Tovejshane til PVC for 200 mm PVC Ret til ændringer af tekniske specifikationer forbeholdes. Den anførte tekst og tekniske data må ikke helt eller delvist gengives uden tílladelse fra Landia A/S. 201073DK-01-07-13

Kontakt venligst: Landia A/S Industrivej 2 DK-6940 Lem St. Tel.: 97 34 12 44 Fax: 97 34 16 98 e-mail: info@landia.dk www.landia.dk

Kontakt venligst: Landia A/SIndustrivej 2DK-6940 Lem St.Tel.: +45 97 34 12 44Fax: +45 97 34 16 98e-mail: info@landia.dkwww.landia.dk

Lan

gak

slet

gyl

lep

um

pe

Lan

dia

gyl

lep

um

pe

typ

e TP

G f

or

trak

tor

og

typ

e M

PG f

or

eld

rift

.

En d

rift

ssik

ker,

ro

bu

st p

um

pe

med

hø

j kap

acit

et t

il p

um

pn

ing

af

gyl

le o

g a

nd

re v

ansk

elig

t

pu

mp

bar

e m

edie

r.

Lan

dia

tilb

yder

ind

ivid

uel

le p

um

pel

øsn

ing

er.

•M

oto

rstø

rrel

ser

5,5

– 30

,0 k

W

•4”

, 5”

elle

r 6”

pu

mp

erø

r

•Le

vere

s ti

l fo

r- o

g la

ger

tan

ke in

dti

l 6 m

tan

kdyb

de

•V

arm

forz

inke

de

rør

og

bes

lag

•K

apac

itet

op

til

ca. 4

50 m

3/t

Spec

ial f

eatu

res:

•

Meg

et s

ervi

ceve

nlig

ko

nst

rukt

ion

•St

øb

t p

um

peh

us

og

pu

mp

ehju

l med

mak

sim

al

virk

nin

gsg

rad

•Tr

akto

rdri

ft m

ed v

inke

lgea

r.

Kan

leve

res

med

just

erb

ar

Kn

ivsy

stem

i h

ærd

et

Trak

tord

rift

med

vin

kelg

ear.

bu

nd

bla

nd

er.

stål

til

fin

del

ing

af

O

pti

mal

yd

else

:

Ekst

rau

dst

yr k

an le

vere

s fo

r h

alm

en o

g s

neg

l fo

r 54

0 rp

m. v

ed 4

”/5”

pu

mp

er

mo

nte

rin

g i

lag

erta

nk.

en

sart

et f

ød

nin

g a

f o

g 1

000

rpm

. ved

6”

pu

mp

er.

pu

mp

e si

krer

tils

top

-

nin

gsf

ri p

um

pn

ing

.

En

gin

eer

ed

to

last

Tilb

ehø

rsd

ele

til

pu

mp

esys

tem

er

En

gin

eer

ed

to

last

7712

0 ..

416-

./.

7603

1..

7212

012

7502

053/

7502

062

isole

ret

med

var

mek

abel

9340

078/

9340

079/

9340

080

163A

/B/C

174A

./.17

3A./.

174B

./.17

3B./.

167-

./.

9340

0..

174C

./.17

3C./.

164A

/B/C

2 way tap, Branch Socket and Clutch

Langakslet gyllepumpe

Landia gyllepumpe type TPG for traktor og type MPG for eldrift. En driftssikker, robust pumpe med høj kapacitet til pumpning af gylle og andre vanskeligt pumpbare medier. Landia tilbyder individuelle pumpeløsninger.

• Motorstørrelser 5,5 – 30,0 kW • 4”, 5” eller 6” pumperør • Leveres til for- og lagertanke indtil 6 m tankdybde • Varmforzinkede rør og beslag • Kapacitet op til ca. 450 m3/t

Special features:

• Meget servicevenlig konstruktion • Støbt pumpehus og pumpehjul med maksimal

virkningsgrad • Traktordrift med vinkelgear.

Kan leveres med justerbar Knivsystem i hærdet Traktordrift med vinkelgear. bundblander. stål til findeling af Optimal ydelse

Engineered to last

AccessoriesA wide range of standard and customized installation equipment, pipe systems, hose connections, control systems and lifting devices are available.

See the entire product range on: www.landia.co.uk/accessories

Automatic Control of the Slurry SystemWe offer several different control systems from the simple, manual start/stop switch to advanced programmable PLC controllers with temperature sensor, pressure sensor, frequency converter, log and remote monitoring.

The choice of control system is based on a thorough clarification of the customer’s current needs and long-termed level of ambition.

Stainless Steel Sluice Valve

Scale: Sign.: Date:

Dwg.no.:HL 14-03-2013

7614001-brochure

Transfer Pipe for Open Storage TankLevel Sensor

Transfer Pipe for Covered Storage Tank

Insulated and Heated Transfer Pipe

Scale:Sign.:Date:

Dwg.no.:HLKSK19-10-2012

3740895Overpumpningsrør 6"med varmekabel og isoleringPrinciptegning

1:25

Styret dokument

230V

Rev. date: 28-05-2013

Founded in 1933, Landia is today a modern, successful and firmly based manufacturer of a comprehensive programme of chopper pumps, propeller mixers and aerators, offering customised solutions and systems for difficult to handle liquids with high dry matter content, biomass and other organic waste. Our customers are involved in the conception and construction of biogas plants, municipal and industrial waste water treatment, processing of by-products and waste from the food industry, agricultural slurry handling and much more.

We support our customers through our subsidiaries and offices in the UK, the US, Germany and China and a worldwide net of professional distributors.

Distributor:

Landia A/SIndustrivej 2DK-6940 Lem St.Tel.: +45 97 34 12 44Fax: +45 97 34 16 98e-mail: info@landia.dkwww.LandiaWorld.com

BK03A.C15 21.03.2014