Slimline - DETA Electrical...dimmable LED lamps (requiring leading or trailing edge control), incandescent lamps or low voltage lamps • Suitable for loads up to 100W LED, 250W incandescent

Slimline2019 / 2020

Slimline

Slimline has established itself as the white moulded wiring accessory range of choice by professional installers across the country, and has received the highest accolade being specified by many of the major UK new build housing developers.

Slimline offers a comprehensive range of accessories including sockets with outboard rocker switches, wide rocker switches, universal dimmers, USB charging sockets and data modules to meet the demands of all modern day domestic and commercial applications.

Products in the Slimline range are guaranteed for 25 years (2 years for electronic products).

t: 01582 544 544 | e: [email protected] | w: detaelectrical.co.uk1

Contents

Product Features

Socket Outlets 3

USB Charging Socket Outlets 4

Essential Supply Socket Outlets 4

Round Pin Socket Outlets 5

Accessories 5

Plate Switches 6

Wide Rocker Plate Switches 7

Architrave Switches 7

Dimmer Switches 8

Door Bell and Bell Pushes 8

Connection Units 9

20A Double Pole Switches 10

50A Double Pole Switches 11

Cooker Control Units 12

Shaver Socket 12

Telephone Outlets 13

TV Outlets 13

Blank Plates 14

Flex Connection Plates 14

Media Plate 15

Data Plates 15

Modules 16

Slimline offers a wealth of features to ensure that installation is fast and effortless.

Terminals are angled on many products and with white terminal markings and colour coded terminal entries make wiring simpler, especially in poor lighting. Captive, backed-out terminal screws reduce installation time to a minimum.

All Slimline products are manufactured from a resilient high grade urea with anti-microbial properties and are packaged in individual polybags to ensure that products remain clean and undamaged right up until the point of installation.

Curved rockers

All products are only 7mm thick with curved edges top and bottom

Earth pin operated shutters

High quality heat resistant frontplates

Fixing screw caps supplied with every product

Clear terminal markings

Captive, backed out terminal screws

Recessed earth bar

Funnel entry, colour coded terminals

Top access terminals

Angled terminals

High grade urea frontplate with anti-microbial properties

t: 01582 544 544 | e: [email protected] | w: detaelectrical.co.uk 2

Slimline

• Top facing terminal screws

• Clear terminal markings

• Colour coded terminals

• Recessed earth bar

• Captive and backed out terminals

• Single and double pole switched versions

• 2 earth terminals on 2 gang sockets

• Only one size 4mm screwdriver needed

• Terminals have large lead-ins

• In compliance with BS 1363: Part 2

• 25-year guarantee

Socket Outlets

Unswitched - 13 AmpS1206 1 gang unswitchedS1208 2 gang unswitched

Single Pole - 13 AmpS1207R* 1 gang switched - recessedS1207S 1 gang switched - standardS1209R* 2 gang switched - recessed S1209S 2 gang switched - standard

Double Pole - 13 AmpS1207SDP 1 gang switchedS1207DPP 1 gang switched with neonS1209SDP 2 gang switchedS1209DPP 2 gang switched with neonsS1293 2 gang outboard switched S1296 2 gang outboard switches clean earth

S1208

S1209S

S1209SDP

S1209R

S1209DPP

S1296S1293

S1206

S1207DPP

S1207R

S1207S

S1207SDP

flush 25mm

dry lining 35mm

surface 25mm

1g DB162 DB2540 V1221

2g DB163 DB2541 V1223

Back Boxesminimum recommended depth

Slimline


flush 25mm

dry lining 35mm

surface 25mm

2g DB163 DB2541 V1223


• S1299 USB ports deliver up to 4.0A (3.0A + 1A) simultaneous charging current across 3 ports

• S1299 uses auto IC technology to detect connected devices and provide optimised high-speed charging

• S1299 fits Deta 25mm flush metal and 35mm dry lining boxes

• S1298 USB ports deliver up to 3.4A (2.4A + 1A) simultaneous charging current across 2 ports

• S1298 fits Deta 35mm flush metal and dry lining boxes

• S1298 supplied with optional 10mm spacer to fit 25mm boxes

• In compliance with BS 1363:Part 2• 2-year guarantee

USB Charging SocketOutlets

S1298

S1299






• Double pole switched sockets

• 2 earth terminals on 2 gang sockets



• In compliance with BS 1363: Part 2

• 35mm deep back box required


EssentialSupplySocket Outlets

Double Pole - 13 AmpS1291 2 gang switched with red rockersS1292 2 gang switched with red faceplate and rockersS1294 2 gang outboard with red rockersS1295 2 gang outboard with red faceplate and rockers

S1291 S1292

S1295S1294

Essential Supply Sockets

A range of switched sockets with highly visible red rockers and/or faceplate for use in areas where it is necessary to permanently highlight essential supply circuits for example in hospitals, laboratories and computer installations.

Slimline


Single Pole - 13 Amp + 4.0A USBS1299 2 gang switched and 3 USB charging ports

Double Pole - 13 Amp + 3.4A USBS1298 2 gang switched and 2 USB charging ports

*Special order product, minimum order quantity and lead time applies

flush dry lining surface

S129835mm DB165

35mm DB2541

33mm V1224

S129925mm DB163

35mm DB2541

33mm V1224





• Earth pin operated safety shutters



• In compliance with BS 546


Round Pin SocketOutlets

Accessories

UnswitchedS1330* 1 gang 2A unswitchedS1331 1 gang 5A unswitchedS1332* 1 gang 15A unswitched

SwitchedS1333* 1 gang 5A switchedS1334* 1 gang 15A switched

SparesS1419WH Fixing screw caps (Pack of 100)SP0004WH Dimmer knobs (Pack of 10) - white

Longer Length Fixing Screws SP0001CH 50mm length (Pack of 10) - chromeSP0003CH 75mm length (Pack of 10) - chrome

S1330 S1331

S1333

S1332

S1334flush 25mm

dry lining 35mm

surface 25mm

1g DB162 DB2540 V1221


S1419WH

SP0001CH


Slimline

• All plate switches are X-rated and can be used for switching inductive or fluorescent loads without de-rating


• Grey font marking

• Captive and backed out terminals (except S1246 and S1247)



• Locator plate fits 1g, 2g and 3g Slimline plate switches, compatibility depends on load

• In compliance with BS EN 60669-1


Plate Switches

10 AmpS1202 1 gang 1-wayS1203 1 gang 2-wayS1204 2 gang 2-wayS1205 3 gang 2-wayS1244 4 gang 2-wayS1245 6 gang 2-wayS1246 IntermediateS1325 2 gang 2-way + intermediate

10 Amp Press S1249 1 gang 2-way press switchS1249B 1 gang 1-way press switch bell symbol

10 Amp 3 Pole Fan Isolator S1247 3 pole fan isolator

AccessoriesS1417WH Neon locator plate - white neon

Door Card SwitchS1248 Energy saving

S1203S1202

S1246

S1249S1325 S1249B

S1247

S1204

S1205

S1248S1417WH

S1244

S1245



Slimline

flush dry lining surface

1-3g16mm DB152

35mm DB2540

16mm V1220E

4-6g25mm DB163

35mm DB2541

25mm V1223

Back BoxesMinimum recommended depth

• All plate switches are X-rated and can be used for switching inductive or fluorescent loads without de-rating






Wide Rocker Plate Switches

10 Amp S1345 1 gang 2-way S1346 2 gang 2-wayS1347 3 gang 2-way S1348 Intermediate

S1345

S1348

S1346 S1347


• Grey font engraving




• In compliance with EN 60669-1


Architrave Switches

10 AmpS1321 1 gang 2-wayS1322* 2 gang 2-wayS1323 1 gang 2-way ‘PRESS’ switch

S1321 S1323

flush 27mm

surface 16mm

1g DB169 V1324

2g n/a V1325


S1322

flush 16mm

dry lining 35mm

surface 16mm

1-3g DB152 DB2540 V1220/E



Slimline

flush 25mm

dry lining 35mm

surface 25mm

1g DB162 DB2540 V1221

2g DB163 DB2541 V1223


S1261

S1263

S1262

S1269

• Universal dimmers suitable for use with dimmable LED lamps (requiring leading or trailing edge control), incandescent lamps or low voltage lamps

• Suitable for loads up to 100W LED, 250W incandescent


• Push on / push off dimmers are suitable for 2-way circuits

• Spare dimmer knobs available

• In compliance with BS EN 60669-2-1, BS55014-1, BS 55014-2


Dimmer Switches

Universal DimmersS1261 1 gang 2-way S1262 2 gang 2-wayS1263 3 gang 2-way S1269 4 gang 2-way

• Door bell and bell push

• 240V mains voltage

• Needs wire between door bell and bell push

• 2 tone

• Supplied with additional black cover for bell push


Door Belland Bell Pushes

Door Bell KitC3504 Door chime and bell push with white and black covers

Bell PushesC3506CH Chrome bell pushC3507 Bell push with white and black covers

C3504

C3507

C3506CH



Slimline

• Lockable fuse carrier for safety isolation



• Neon versions available

• Neon leads enclosed

• Captive fuse carrier

• Front or bottom flex outlet versions available

• 2 earth terminals



• In compliance with BS 1363: Part 4 as applicable


Connection Units

13 Amp UnswitchedS1360 Unswitched spurS1361 Unswitched spur with neonS1362 Unswitched spur with front flex outletS1363 Unswitched spur with neon and front flex outletS1364 Unswitched spur with bottom flex outlet

13 Amp SwitchedS1370 Switched spurS1371 Switched spur with neonS1372 Switched spur with flex outletS1373 Switched spur with neon and flex outletS1374 Switched spur with bottom flex outlet

3 Amp UnswitchedS1380* Unswitched spur - 3A fuseS1381* Unswitched spur with neon - 3A fuse

3 Amp SwitchedS1386 Switched spur - 3A fuse

S1371

S1360

S1380

S1363

S1361

S1381

S1364

S1362

S1370

S1386

S1373

S1372

S1374

flush 25mm

dry lining 35mm

surface 25mm

1g DB162 DB2540 V1221



Slimline


flush 25mm

dry lining 35mm

surface 25mm

1g DB162 DB2540 V1221








• Flex outlet option available





20A Double Pole Switches

20 AmpS1390 SwitchS1390WH Switch ‘WATER HEATER’S1391 Switch with neonS1391WH Switch with neon ‘WATER HEATER’S1392 Switch with flex outletS1393 Switch with neon and flex outletS1393WH Switch with neon and flex outlet ‘WATER HEATER’ S1218P Dual switch with neon

S1390WH

S1392

S1218P

S1391

S1393

S1390

S1391WH

S1393WH


Slimline










50A Double Pole Switches

50 AmpS1300 Switch with red rockerS1300P Switch with neon and red rockerS1310 Switch with white rockerS1310P Switch with neon and white rocker

50 Amp TallS1301 Tall switch with red rocker S1301P Tall switch with neon and red rockerS1311 Tall switch with white rockerS1311P Tall switch with neon and white rocker

S1300PS1300

S1301PS1301

S1311 S1311P

flush 47mm

dry lining 46mm

surface 46mm

1g DB167 DB2542 V1228

2g DB168 DB2543 V1229


S1310PS1310


Slimline

• Red or white rockers available









• In compliance with BS 4177 as applicable


Cooker Control Units

45 Amp Cooker Control UnitsS1302 45A switch with red rocker + 13A switched socketS1312 45A switch with white rocker + 13A switched socketS1302P 45A switch with red rocker and neon + 13A switched socket and neonS1312P 45A switch with white rocker and neon + 13A switched socket and neon

45 Amp Cooker Cable OutletS1217 45A Cooker cable outlet

S1302

S1312

S1302P

S1312P

S1217

flush 47mm

dry lining 46mm

surface 46mm

1g DB167 DB2542 V1228

2g DB168 DB2543 V1229

Back Boxes minimum recommended depth



• Dual voltage outlet 240V/115V

• Neon indicator




• In compliance with BS 4573, BS 60742


Shaver Socket

Shaver SocketS1305 Dual voltage with neon

S1305

flush 47mm

dry lining 46mm

2g DB168 DB2543



Slimline


• IDC terminals on UK version

• Screw terminals on RJ11

• Fixing screw attached to rear of plate

• Oftel approved to NS/G/23/L/100005


Telephone Outlets

Telephone OutletsS1352 Single master S1353 Single secondary S1354 RJ11

S1352 S1353 S1354

flush 16mm

dry lining 35mm

surface 16mm

1g DB152 DB2540 V1221


• Fixing screw attached to rear of plate

• Suitable for standard co-axial BS 3041 plugs


TV Outlets

TV OutletsS1264 Single co-axial isolated S1265 TV/FM (DAB) diplexerS1266 TV/F typeS1268 Single co-axial non-isolated S1340 TV/FM (DAB)/satellite triplexerS1342 TV/FM (DAB)/satellite quadplexer

and 2 data modules spaces S1264 S1265

S1266 S1268

S1340 S1342flush 25mm

dry lining 35mm

surface 25mm

1g DB162 DB2540 V1221

2g DB163 DB2541 V1223



Slimline

flush 25mm

dry lining 35mm

surface 25mm

1g DB162 DB2540 V1221

2g DB163 DB2541 V1223





• Dual terminals of live, neutral and earth on 25A flex plates



Blank Plates

Flex Connection Plates

Blank PlatesS1200 1 gangS1201 2 gang

Flex Connection PlatesS1215 25A flex outlet plateS1216 25A flex connection plate (no flex outlet)S1217 45A cooker cable outlet

S1200 S1201

S1216S1215

S1217

flush 47mm

dry lining 46mm

surface 46mm

S1217 DB167 DB2542 V1228

Back Boxes - S1217minimum recommended depth


Slimline

Data Plates

S1422 S1424

• Accepts standard 50x25mm modules

• Full range of power, TV and data modules available, see page 53


flush 25mm

dry lining 35mm

surface 25mm

1g DB162 DB2540 V1221

2g DB163 DB2541 V1223

Back Boxes depends on modules being used minimum recommended depth

Data PlatesS1422 Two module S1424 Four module

Media Plate

Media Plate

Where multiple power, telecom, TV and AV outlets are required in one place, Deta’s Media Plate provides the perfect solution.

Deta Media Plates provide the flexibility to configure the installation to meet your individual requirements.

To make the installation even easier, the flush mounting box has a divider between the mains voltage sockets and the extra low voltage modules (refer to BS7671 IEE Wiring Regulations).

Also available in Slimline Décor and Ultra Flatplate ranges.






• Up to eight single data modules can be installed in a Media Plate

• Flush back box - 40mm deep (DB184) has segregation between LV and ELV sections

• Made from urea

• Full range of TV and data modules available, see page 53


width height depth

DB184 250mm 192mm 40mm

Back Box

Media PlateS1985 4 gang 13A socket and 8 data module spaces

S1987 4 gang 13A socket with TV/FM/DAB quadplexer Co-Axial female, BT secondary and 4 data module spaces, fitted with blanks

S1988 4 gang 13A socket with Co-Axial male, BT secondary and 6 data module spaces, fitted with blanks

S1985

S1987


Slimline

Modules • 25-year guarantee for power modules

• 2-year guarantee for USB charging, data and TV modules


Slimline

USB Charging ModuleS1445 USB charging outlet - 2 x 1A - white

Back box must be 35mm deep

Power ModulesS1446* 13A socket - whiteS1447* 16A 250V German socket - whiteS1448* 15A 125V American socket - whiteS1449* 16A 250V French socket - white

Back box must be 35mm deep

Blanks/Brush ModulesS1425 Brush cable outlet - 2 module - whiteS1428 Blank - 1/2 module - whiteS1429 Blank - 1 module - white

Telephone ModulesS1430 Single master - whiteS1431 Single secondary - whiteS1432 RJ11 - white

Data ModulesS1433 RJ45 - whiteS1434 Cat 6 - white

TV ModulesS1435 Co-axial male - whiteS1436 Co-axial female "return" - whiteS1442 Co-axial female "TV" - whiteS1437 F Type - whiteS1438 TV/FM (DAB) diplexer - whiteS1439 TV/FM (DAB)/satellite triplexer - whiteS1440 TV/FM (DAB)/satellite quadplexer - whiteS1441 HDMI - white

S1432WHS1430WH S1431WH S1433WH S1434WH

S1446 S1448 S1449S1445

S1425 S1428WH S1429WH

S1438WH S1439WH S1440WH S1441WH

S1435WH S1436WH S1437WHS1442WH


Power Modules need to be installed in accordance with the current edition of the wiring regulations (BS7671 IET Wiring Regulations).

ELV Modules and Power Modules must not be mixed in the same compartment.

Deta Electrical company LimitedKingsway House Laporte Way

Luton Bedfordshire LU4 8RJ UK

t: +44 (0) 1582 544 544f: +44 (0) 1582 544 501

e: [email protected]: detaelectrical.co.uk

Documents

Slimline - DETA Electrical...dimmable LED lamps (requiring leading or trailing edge control), incandescent lamps or low voltage lamps • Suitable for loads up to 100W LED, 250W incandescent