Sliding Door Track Systems 303-340 · SLIDING DOOR TRACK SYSTEMS Sliding Door Track Systems ..... 303-340 Soft-Close Track Systems ..... 305-306, 337 ... • 1 set/box

TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 303

To Order – Call 509.535.1663 or 800.888.1663Soft-Close Track System

s for Wood D

oorsSLIDING DOOR TRACK SYSTEMS

Sliding Door Track Systems .....303-340

Soft-Close Track Systems .............. 305-306, 337

Single & Bi-Parting Door Track .............. 306-314

Wall Mount / Barn Door Track ...... 306, 315-321

Bypass Door Track Hardware ................ 322-328

Multi-Folding and Bi-Fold Track ........... 329-334

Pocket Door Hardware ........................... 335-338

Sliding Wood Door Track ........................ 338-339

Cabinet Door Track .................................. 338-339

Sliding Glass Door Track ................................. 340

Wall mount, Barn Door, Pocket, Bypass, Bi-fold.....whatever your application, we’ve gone to great lengths to get track and components to fit your opening.

304 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com

Builders Hardware Specialists Since 1945

SLIDING DOOR TRACK SYSTEMSSoft-Close Track System

s for Wood D

oors

YOUR SHS ACCOUNT# ______________________YOUR SHS CONTACT: _______________________

PRODUCT# QTY. DESCRIPTION PAGE#

FREQUENTLY ORDERED PRODUCTS


To Order – Call 509.535.1663 or 800.888.1663Soft-Close Track System

s for Wood D

oorsSLIDING DOOR TRACK SYSTEMS

Soft-Close Track Systems for Wood Doors

Slido Classic 80-P Complete Track Set - 176lb.Version B - (with Soft-Close on One Side)

• Hafele Slido Classic 80-P Complete Sliding Door Hanger & Track Set for single door applications.

• Set includes: (1ea.) 78-3/4” single aluminum track, (1pr.) four-wheel door hangers with suspension screw, nut & door support flanges, soft and self-closing mechanism on one side; (2ea.) track stoppers with retaining spring, rubber bumper and release device; (1ea). floor guide.

Specifications:• Version B - (23-5/16” Min. Door Width, with Soft-Close on One Side).• Max. Door Weight: 176lbs.(80kg).• Min. Door Thickness: 1-3/16” (30mm).• Door Height adjustable +/- 3/16” (5mm).• Suspension with screw-mounted support flange.• Screw-mounted door connection.• For 2 bi-parting sliding doors, please order 2 sets.• Note: Pictured with clip-on fascia panel #HAF-940-43-120 (sold sepa-

rately).• 1 set/box. Sold per set.

Product # Length Door Width Finish

499-72-035 78-3/4” (2m) 23-5/16” Minimum Aluminum

Slido Classic 80-P Door Hanger Sets - 176lb.

SPECIAL ORDER• Sliding Door Hanger sets for single door. Track sold separately.• Set includes: Door hangers with suspension screw & nut, door support

flanges, soft and self-closing mechanisms w/track stopper (depending on version), and floor guide.

Specifications:• Version A - without Soft-Close.• Version B - with Soft-Close on One Side.• Version C - with Soft-Close on Both Sides (twin mechanism).• Version D - with Soft-Close on Both Sides (double mechanism).• Version E - with two Soft Close for both sides.• Max. Door Weight: 176lbs.(80kg).• Minimum Door Width: 1-3/16” (30mm).• Door Height adjustable +/- 3/16” (5mm).• Suspension with screw-mounted support flange.• Screw-mounted door connection.• For 2 bi-parting sliding doors, please order 2 sets.• Note: Pictured with track & fascia panel, sold separately.• 1 set/box. Sold per set.

Product # Description Door Width

940-82-100 Version A -

940-82-102 Version B 23-5/16” Minimum

940-82-115 Version C 28-5/8” to 33-5/16”

940-82-103 Version D 33-3/8” to 38”

940-82-112 Version E 36” Minimum

https://www.thehardwarehut.com/catalog-product.php?p_ref=294506








SLIDING DOOR TRACK SYSTEMSSoft-Close Track System

s for Wood D

oors

Single Upper Trackfor Slido Track Systems

SPECIAL ORDER• Hafele Aluminum Single Rail for use with the Hafele Slido Track System

components.• Single track only, Hafele Slido door hanger sets and all other acces-

sories sold separately.

Specifications:• For door weight: 88-220lbs.(40-100kg).• Overall Size: 1-1/4”W x 1-5/16”H.• Pre-drilled with holes every 15-3/4” (400mm).• 1/box. Sold individually.

Product # Length Finish

940-43-921 78-3/4” (2m) Aluminum

940-43-926 98-7/16” (3m) Aluminum

Wall Mounting Bracketfor Slido Track Systems

• Wall Mounting Bracket for Hafele Slido Track, includes screw and nut.• Install every 15-3/4” (400mm).• 1/box. Sold individually.

Product # Finish

940-42-061 Galvanized

Rattle-Free Concealed Floor Door Guide

• This floor-mounted, concealed door guide is designed for rattle-free movement of sliding doors.

• Groove Size in bottom of door: 3/8”(10mm)W x 25/32”(20mm)H.• Overall Size: 2-3/8”L x 1-5/16”W x 13/16”H.• Screws not included.• 1/box. Sold individually.

Product # Finish

940-40-031 Black

Floor Mounted Door Guide

• This floor-mounted door guide is designed for smooth movement of sliding doors.

• Groove Size (required in bottom of door): 1/4”(6mm) W x 7/8”(22mm) H.• Overall Size: 2-1/4”L x 1-5/16”W x 1”H.• Screws not included.• 1/box. Sold individually.

Product # Finish

407-01-997 Gray

Single & Bi-Parting Door Track Hardware

Slido Classic Complete Track Sets - 132lb./176lb.Version A - (without Soft-Close)

• Hafele Slido Classic 60-P & 80-P Complete Sliding Door Hanger & Track Sets for single door applications.

• Set includes: 78-3/4” single aluminum track, (1pr.) four-wheel door hangers with suspension screw, nut & door support flanges, (1ea.) track stopper with retaining spring and rubber bumper, (1ea). floor guide.

Specifications:• 60-P Max. Door Weight: 132lbs. (60kg).• 80-P Max. Door Weight: 176lbs. (80kg).• Min. Door Thickness: 1-3/16” (30mm).• Door Height adjustable +/- 3/16” (5mm).• Suspension with screw-mounted support flange.• Screw-mounted door connection.• For 2 bi-parting sliding doors, please order 2 sets.• Note: Pictured with clip-on fascia panel #HAF-940-43-120 (sold sepa-


Product # Description Length Finish

499-72-034 80-P Series - 176 lbs. 78-3/4” (2m) Aluminum

499-72-033 60-P Series - 132 lbs. 78-3/4” (2m) Aluminum









To Order – Call 509.535.1663 or 800.888.1663Single &

Bi-Parting Door Track H

ardware

SLIDING DOOR TRACK SYSTEMS

Single Aluminum Sliding TrackStanley BP150/BP250 Series

• Stanley durable v-groove aluminum track for use with Stanley BP150 / BP250 / BF125 Series hangers.

• Single track only, Stanley door hanger sets sold separately.• For single door, pocket, bypass and bi-fold applications.• NOTE: You must order 2 pieces per opening for bypass applications.

Specifications:• Overall Size: 1-13/16”W x 1-3/16”H.• 10/box. Sold individually.


BP250-01-72 72” Aluminum


BP250-01-120 120” Aluminum

Center Stop for BP250 TrackStanley BP150/BP250 Series

• Center Stop attaches to track to limit panel travel.• For use with Stanley BP250 track (sold separately).• Overall Size: 1-5/8”L x 1-3/16”W• 1/box. Sold individually.

Product # Finish

BP250-77 Zinc

Ball-Bearing Door Hangers, Pair - 250lb.Stanley BP250 Series

• Set Includes: (1pr) hanger plates; (1pr) four-wheel ball-bearing hangers; (1ea) wrench; and screws.

• For installation of a single door, one bypassing, or a pocket door weigh-ing up to 250lbs.

• Large 1” wheels provide smooth action.• Easy to install snap-in feature makes hangers a “snap” to install. Vertical

adjustments can be made after installation.• For use with Stanley BP250 track (sold separately).

Specifications:• Four Wheel Hanger: 1-1/2” W x 2-1/8” L.• 5 pr/box. Sold per pair.

Product #

BP250N-41

Door Hangers, Pair - 150lb.Stanley BP150 Series

• Set Includes: (1pr) hanger plates; (1pr) four-wheel hangers; (1ea) wrench; and screws.

• For installation of a single door, one bypassing, or a pocket door weigh-ing up to 150lbs.



Specifications:• Four Wheel Hanger: 1-1/2” W x 2-1/8” L.• 5 pr/box. Sold per pair.

Product #

BP150N-41









SLIDING DOOR TRACK SYSTEMSSingle &


ardware


50E Single Aluminum Sliding TrackGrant 75E Series

The Grant 75E Series is a medium duty commercial and residential grade sliding door hardware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• For use with Grant 75E Series Single, Bi-Parting, By-Pass and Bi-Fold 50 Series Components.

• Pre-drilled aluminum box track.• Overall Size: 1-13/32”W x 13/16”H.• Screws not included (#10 flat head recommended).• NOTE: Single track only, 2 required for bi-parting or by-pass applications.• 1/box. Sold individually.


113-440-1 72” Aluminum

113-440-2 96” Aluminum

113-440-3 120” Aluminum

75E Ball-Bearing Door Carrier Set - 75lb.Grant 75E Series

• Set Includes: (2ea) 50E four-wheel ball-bearing carriers, (2ea) quick release top plate, 110 floor guide, screws and installation instructions.

• Grant 75E Series Medium-Duty Hardware - Ideal for Single, Bi-Parting, By-Pass Door installations.

• For door thickness 3/4” minimum, top mount.• For doors up to 75 lbs.• Precision ball-bearing wheels.• Spring loaded, quick release mechanism for easy door installation and

adjustment.• 7/16” vertical adjustment.• Headroom: 1-25/32” min. to 2-7/32” max.• For use with Grant 50E Track (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-533-3 Gray

50E Ball-Bearing Carrier - 75lb.Grant 75E Series

• Set Includes: (1ea) 50E four-wheel ball-bearing carrier, (1ea) quick release top plate and screws.


• For door thickness 3/4” minimum, top mount.• For doors up to 75 lbs.• Precision ball-bearing wheels.• Quick release mechanism for easy door installation and adjustment.• 7/16” vertical adjustment.• Headroom: 1-25/32” min. to 2-7/32” max.• For use with Grant 50E Track (sold separately).• 1/box. Sold individually.

Product # Finish

113-432-2 Gray

Floor Mount Door Guide

• Grant Floor Guide 110 for Single Door Installations.• Overall Size: 1-3/4”L x 3/4”H.• Screws included.• 1 pr/box. Sold per pair.

Product # Finish

050-101 Beige










ardware







113-443-3 72” Aluminum

113-443-4 96” Aluminum

113-443-5 120” Aluminum

150E Ball-Bearing Carrier Set - 150lb.Grant 150E Series

• Set Includes: (2ea) 150E four-wheel ball-bearing carriers, (2ea) spring-loaded quick release top plate, 7015 floor guide, screws and installation instructions.


• For door thickness 1” minimum, top mount.• For doors up to 150 lbs.• Precision ball-bearing wheels.• Spring loaded, quick release mechanism for easy door installation and


Product # Finish

113-533-4 Gray


• Set Includes: (1ea) four-wheel ball-bearing carrier, (1ea) spring-loaded quick release top plate, and screws.



adjustment.• 1/2” vertical adjustment.• Headroom: 2-1/16” min. to 2-9/16” max.• For use with Grant 150E Track (sold separately).• 1/box. Sold individually.

Product # Finish

113-516-3 Gray










ardware

Single & Bi-Parting Door Track HardwareSD Aluminum Single Box TrackTop Line Grant SD Series - 150 lb.

Top Line Grant SD Series - A Medium duty commercial and residential grade sliding door hardware series ideal for single and bi-parting installa-tions. Applications include doors between rooms, closet doors, cabinets, and storage walls.

• For use with Top Line Grant SD Series Single, Bi-Parting, By-Pass Series Components.

• Pre-drilled, mill finish aluminum box track.• Screws not included (#10 x 1-1/4” pan head recommended).• NOTE: Single track only. For by-passing doors, mount parallel tracks.• 1/box. Sold individually.


919-973-8 72” Aluminum

919-983-0 96” Aluminum

919-983-1 120” Aluminum

SD Ball-Bearing Carrier Set - 150lb.Top Line Grant SD Series

• Set Includes: (2ea) four-wheel ball-bearing carriers, (2ea) aluminum top plates, (2ea) endstop catch, (1ea) 7015 floor guide, screws and installa-tion instructions.

• Top Line Grant SD Series Medium-Duty Hardware - Ideal for Single and Bi-Parting installations.

• For door thickness 1” minimum, top mount, adjustable.• For doors up to 150 lbs.• Aluminum carrier with precision ball-bearing wheels, self-leveling.• Self-leveling design allows for even distribution of load for maximum

performance and durability.• Endstop catch, hold door in place.• 1/2” vertical adjustment.• Headroom: 2-13/16” min. to 3-5/16” max.• For use with Grant SD Track (sold separately).• For by-pass and bi-parting applications, order 2 sets of hardware.• 1 set/box. Sold per set.

Product # Finish

919-112-4 Aluminum

Wall Mount BracketTop Line Grant SD/HD Series

• The Top Line Grant SD/HD Continuous Wall mount bracket is ideal for medium and heavy duty single and bi-parting applications where traditional header mounted pocket and sliding doors are not desired or cannot be structurally installed.

• For use with Grant SD and HD Series Aluminum Box track.• Suitable for 1” (25.4 mm) through 1-3/4” (44.5 mm) thick doors.• Track mounts to wall mount bracket using #10-24 screws/nuts (in-

cluded), 8” (203.2 mm) spacing recommended, 16” (406.4mm) max.• 1/box. Sold individually.


920-289-8 72” Aluminum

920-289-9 96” Aluminum

NOTE: Detailed specifications and installation instructions for our sliding

door track systems can be found online.

Visit us at www.thehardwarehut.com for more information.










ardware


Heavy-Duty Aluminum Single Box TrackTop Line Grant HD Series - 325 lb.

Top Line Grant HD Series - A Heavy-duty commercial and residential grade sliding door hardware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, and storage walls.

• For use with Top Line Grant HD Series Single, Bi-Parting, By-Pass Series Components.

• Pre-drilled, mill finish aluminum box track.• Screws not included (#10 x 1-1/4” pan head recommended).• NOTE: Single track only. For by-passing doors, mount parallel tracks.• 1/box. Sold individually.


920-141-8 72” Aluminum

920-144-0 96” Aluminum

920-144-1 120” Aluminum

920-144-2 144” Aluminum

Ball-Bearing Carrier Set - 325lb.Top Line Grant HD Series

• Set Includes: (2ea) four-wheel ball-bearing carriers, (2ea) aluminum top plates, (2ea) endstop catch, (1ea) 7015 floor guide, screws and installa-tion instructions.

• Top Line Grant HD Series Heavy-Duty Hardware - Ideal for Single and Bi-Parting installations.

• For door thickness 1” minimum, top mount, adjustable.• For doors up to 325 lbs.• Aluminum carriers, precision ball-bearing wheels, self-leveling.• Self-leveling design allows for even distribution of load for maximum

performance and durability.• Easy-install, endstop catch.• 1/2” vertical adjustment.• Headroom: 2-13/16” min. to 3-5/16” max.• For use with Grant HD Track (sold separately).• For by-pass and bi-parting applications, order 2 sets of hardware.• 1 set/box. Sold per set.

Product # Finish

919-112-5 Aluminum

Wall Mount BracketTop Line Grant SD/HD Series

• The Top Line Grant SD/HD Continuous Wall mount bracket is ideal for medium and heavy duty single and bi-parting applications where traditional header mounted pocket and sliding doors are not desired or cannot be structurally installed.

• For use with Grant SD and HD Series Aluminum Box track.• Suitable for 1” (25.4 mm) through 1-3/4” (44.5 mm) thick doors.• Track mounts to wall mount bracket using #10-24 screws/nuts (in-

cluded), 8” (203.2 mm) spacing recommended, 16” (406.4mm) max.• 1/box. Sold individually.


920-289-8 72” Aluminum

920-289-9 96” Aluminum












ardware

Single & Bi-Parting Door Track Hardware1201 Heavy-Duty Aluminum I-Beam Single TrackTop Line Grant 1210/1230 Series

Top Line Grant 1210/1230 Series - A Heavy duty commercial and residen-tial grade sliding door hardware series ideal for design applications which require the movement of heavy panels, space dividers or large doors.

• For use with Top Line Grant 1210 and 1230 Series Single, Bi-Parting and By-Pass Components.

• Pre-drilled extruded aluminum I-Beam track; jump proof design.• Overall Size: 1-7/8”W x 1-19/64”H; .0125” thick aluminum.• Screws not included (#12 pan head recommended).• NOTE: Single track only. For by-passing doors, mount parallel tracks.• 1/box. Sold individually.


050-123 72” Aluminum


050-125 120” Aluminum

050-126 144” Aluminum

1210 Ball-Bearing Carrier Set - 225lb.Top Line Grant 1210 Series

• Set Includes: (2ea) 1202 two-wheel ball-bearing carriers with pendant and top plates, (1ea) 7015 floor guide, screws and installation instruc-tions.

• Grant 1210 Series Heavy-Duty Hardware - For Single, Bi-Parting, By-Passing and Pocket Door installations.

• For door thickness 1” minimum, top mount, adjustable.• For doors up to 225 lbs.• Steel, precision ball-bearing wheels.• Two wheel carrier, center hung for efficient operation.• 1/2” vertical adjustment.• Headroom: 3-1/4” min. to 3-3/4” max.• For use with Grant 1201 Track (sold separately).• For by-pass and bi-parting applications, order 2 sets of hardware.• 1 set/box. Sold per set.

Product # Finish

113-327-2 Zinc

Track Mounted Bumper StopTop Line Grant 1210 Series

• Grant 1212 Track Mounted Bumper Stop with Rubber Bumper.• For use with Grant 1201 Aluminum I-Beam track and 1210 Series Com-

ponents.• 2 required per track.• 1/box. Sold individually.

Product # Finish

050-139 Aluminum

1230 Ball-Bearing Carrier Set - 325lb.Top Line Grant 1230 Series

• Set Includes: (2ea) 1205 four-wheel ball-bearing carriers with pendant and top plates, (1ea) 7015 floor guide, screws and installation instruc-tions.

• Grant 1230 Series Heavy-Duty Hardware - For Single, Bi-Parting, By-Passing and Pocket Door installations.

• For door thickness 1” minimum, top mount, adjustable.• For doors up to 325 lbs.• Steel, precision ball-bearing wheels.• Four wheel carrier, center hung for efficient operation.• 1/2” vertical adjustment.• Headroom: 3-1/4” min. to 3-3/4” max.• For use with Grant 1201 Track (sold separately).• For by-pass and bi-parting applications, order 2 sets of hardware.• 1 set/box. Sold per set.

Product # Finish

113-327-8 Zinc


• Grant 1213 Track Mounted Bumper Stop with Rubber Bumper.• For use with Grant 1201 Aluminum I-Beam track and 1230 Series Com-

ponents.• 2 required per track.• 1/box. Sold individually.

Product # Finish

050-140 Aluminum












ardware


7001 Aluminum Single I-Beam TrackTop Line Grant 7000 Series

Top Line Grant 7000 Series - A medium duty commercial and residential grade sliding door hardware series ideal for single and bi-parting installa-tions. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• For use with Top Line Grant 7000 Series Single and Bi-Parting Door Series Components.

• Pre-drilled extruded aluminum I-Beam track; jump proof design.• Mounting holes approx. every 11” on center.• Screws not included (#8 pan head recommended).• NOTE: Single track only, 2 required for bi-parting applications.• Tracks under 8’ notched at one end for easy access.• 1/box. Sold individually.




050-523 120” Aluminum

Ball-Bearing Carrier Set - 150lb. (Top Mount)Top Line Grant 7000 Series

• Set Includes: (2ea) 7000 four-wheel ball-bearing carriers, (2ea) 7222 adjustable top-plates, (1ea) 110 floor guide, wrench, screws and installa-tion instructions.

• Grant 71-222 Medium-Duty Carrier - For Single and Bi-Parting Door installations.

• For door thickness 3/4” minimum, top mount, adjustable.• For doors up to 150 lbs.• Steel, precision ball-bearing wheels.• Pivoting rocker arms ensure track-carrier contact.• Ball and socket suspension compensates for minor header misalignment.• Lock nut ensures permanent positioning.• 3/4” vertical adjustment.• Headroom: 2-1/8” min. to 2-7/8” max.• For use with Grant 7001 Track (sold separately).• 1 set/box. Sold per set.

Product # Finish113-334-5 Zinc

Ball-Bearing Carrier Set - 150lb. (Side Mount)Top Line Grant 7000 Series

• Set Includes: (2ea) 7000 four-wheel ball-bearing carriers, (2ea) 7034 door aprons, (1ea) 110 floor guide, wrench, screws and installation instructions.

• Grant 71-034 Medium-Duty Carrier Set - For Single and Bi-Parting Door installations.

• For door thickness 3/4” minimum, side mount, adjustable.• For doors up to 150 lbs.• Precision ball-bearing wheels.• Pivoting rocker arms ensure track-carrier contact.• Ball and socket suspension compensates for minor header misalignment.• Lock nut ensures permanent positioning.• 1/4” vertical adjustment.• Headroom: 1-7/8” min. to 2-1/8” max.• For use with Grant 7001 Track (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-334-0 Zinc


• Grant 7014 Track Mounted Bumper Stop with Rubber Bumper.• For use with Grant 7001, 7003 & 7005 Aluminum I-Beam track.• 2 required per track.• 1/box. Sold individually.

Product # Finish

050-561 Zinc











ardware


7000 Ball-Bearing Carrier - 150lb.Top Line Grant 7000 Series

• Grant 7000 Carrier: (1ea) 7000 four-wheel ball-bearing carrier ONLY, top plates for door attachment must be purchased separately.

• Grant 7000 Medium-Duty Carrier - For Single, Bi-Parting and By-Pass Door installations.

• For door thickness 3/4” minimum.• For doors up to 150 lbs.• Steel, Precision ball-bearing wheels.• For use with Grant 7000 Series Single and Double I-Beam Tracks (sold

separately).• 1/box. Sold individually.

Product # Finish

113-333-9 Zinc

7111 Top Plate for Ball-Bearing Carrier - 150lb.Top Line Grant 7000 Series

• Grant 7111 Top Plate ONLY. Steel, with pendant bolt. Screws included.• For use with 7000 ball-bearing carrier (must be purchased sepa-

rately).

• Grant 71-111 Medium-Duty Set - For Single and Bi-Parting Door installa-tions.

• For door thickness 3/4” minimum, top mount, non-adjustable.• For doors up to 150 lbs.• Pivoting rocker arms ensure track-carrier contact.• Ball and socket suspension compensates for minor header misalignment.• Lock nut ensures permanent positioning.• Non-adjustable.• Headroom: 1-15/16”.• For use with Grant 7001 Track (sold separately).• 1/box. Sold individually.

Product # Finish

050-564 Zinc

7222 Top Plate for Ball-Bearing Carrier - 150lb.Top Line Grant 7000 Series

• Grant 7222 Top Plate ONLY. Steel, with pendant bolt. Screws included.• For use with 7000 ball-bearing carrier (must be purchased sepa-

rately).

• Grant 71-222 Medium-Duty Set - For Single, Bi-Parting and By-Pass Door (3/4” or 1-3/8” thick) installations

• For door thickness 3/4” minimum, top mount, adjustable.• For doors up to 150 lbs.• Pivoting rocker arms ensure track-carrier contact.• Ball and socket suspension compensates for minor header misalignment.• Lock nut ensures permanent positioning.• 3/4” vertical adjustment.• Headroom: 2-1/8” to 2-7/8”.• For use with Grant 7001 and 7003 Track (sold separately).• 1/box. Sold individually.

Product # Finish

050-566 Zinc

Floor Mount Door GuideTop Line Grant 7000 Series

• Grant Floor Guide 7015 for Single Door Installations.• Overall Size: 3”L x 7/8”W x 3/4”H.• Screws included.• 1/box. Sold individually.

Product # Finish

050-562 Zinc






To Order – Call 509.535.1663 or 800.888.1663W

all Mount and Barn D

oor Track Systems


Wall Mount and Barn Door Track Systems

Wall-Mount Track Set - 250lb.Knape & Vogt Metro Series

Architecturally Designed Wall-mount Sliding Door Hardware for Residen-tial and Commercial Spaces, METRO is designed to blend seamlessly with any interior décor - from a cosmopolitan postmodern loft, to a space-saving traditional environment - METRO’s architecturally focused design delivers a clean, finished look to any interior doorway or room divider.• Set Includes: aluminum wall mount track; wall-mount fascia with end

caps, four-wheel ball-bearing hangers; quick-release top-mount hanger plates; concealed floor guide; door stops; wrench, screws and instruc-tions. (Fasteners to hang track not included).

Specifications:• For installation of single and bi-parting doors (as noted in configuration

of set).• For 1” to 1-3/4” thick doors.• Track supports up to 250lbs. total.• Quiet 4-wheel ball-bearing carriers.• Architecturally designed, low profile fascia snaps easily on aluminum

wall-mounted track.• End caps conceal track & provide a finished look.• 1 set/box. Sold per set.

Product # Length Door Configuration Finish

WM-M250A-A-6 72” 1 x 36” Door Aluminum



WM-M250A-B-6 72” 1 x 36” Door Dark Bronze



KV Metro Hardware Pack

• Knape & Vogt Metro Hardware Pack Includes Hardware for One Door: (1pr) four-wheel ball-bearing hangers; (1pr) quick-release top mount hanger plates; (4ea) door stops, (1ea) floor guide, (1ea) wrench and screws.

• For installation of 1ea. single door weighing up to 250lbs. total; 1” to 1-3/4” thick.

• Quiet 4-wheel ball-bearing carriers.• Replacement hangers, For use with KV Metro Track Systems.• 10 set/box. Sold per set.

Product # Finish

PB-WM-250 Aluminum

KV Metro End Caps

• KV Metro End caps made of anodized etched aluminum.• Replacements, For use with KV Metro Track Systems.• 1 pr/box. Sold per pair.

Product # Finish

WMEC-MPR-A Aluminum

WMEC-MPR-B Dark Bronze












SLIDING DOOR TRACK SYSTEMSW


oor Track Systems


Wall-Mount I-Beam Track Set - 400lb.Johnson 200WM Series

The 200WM is a commercial grade wall mounted “barn door type” sliding door hardware system designed to carry heavy doors. The 200WM Hard-ware Set features heavy-duty extruded aluminum I-beam track, heavy-duty track mounting brackets and strong four wheel adjustable hangers with machine turned ball bearing wheels. 11-13 gauge zinc trivalent plated steel parts. • Set Includes: (1ea) aluminum I-Beam track; heavy duty track brackets,

(1pr) four-wheel ball-bearing hangers; 3 different floor guides options; door stops; wrench & instructions.

Specifications:• For installation of one door up to 400lbs.• For door thickness 1-1/8” minimum, top mount hardware.• Adjustable and detachable, 4-wheel ball-bearing carriers.• NOTE: For bi-parting/converging sliding doors, order 2 sets.• 1 set/box. Sold per set.


200WM481 48” 1 x 24” Door Aluminum




Heavy-Duty Single I-Beam Track OnlyJohnson 200WM Series

• Johnson 200WM Single, Precision Extruded Aluminum I-Beam track - for single, bi-parting and bi-fold door applications.

• Track only. Door hangers, all other components sold separately.• NOTE: For bi-parting/converging sliding doors, order 2.



200-0048 48” Aluminum

200-0060 60” Aluminum

200-0072 72” Aluminum

200-0096 96” Aluminum

200-00120 120” Aluminum

200-00144 144” Aluminum

Single Ball-Bearing Door Hanger - 400lb.Johnson 200 Series

Johnson 2020 Single Door Hanger Includes: (1ea) 2002 hanger plate; (1ea) four-wheel hanger; screws.

• For installation of single, bypassing, folding or pocket doors up to 400lbs. per door.

• Large, 1” diameter nylon wheels with ball-bearing design for smooth rolling and long-life.

• “Flip-of-a-clip” separates wheels from hanger plate for easy door installa-tion/removal.

• For use with Johnson 200 Series I-Beam track (sold separately).• 1/box. Sold individually.

Product #

2020

Track StopJohnson 200 Series

• Johnson 2005 track stop for use with Johnson 200 Series I-Beam track.• 2 required per track.• 1/box. Sold individually.

Product # Finish

2055 Zinc

Wall Mount Track BracketJohnson 200 Series

• Johnson 2006 wall mount bracket for use with Johnson 200 Series I-Beam track.

• 16” (406.4mm) spacing recommended.• Mounting Screws included.• 1/box. Sold individually.

Product # Finish

2006PLBG Aluminum















To Order – Call 509.535.1663 or 800.888.1663W


oor Track Systems


Wall-Mount Track Set w/Fascia - 125lb.Johnson 2610F Series

Commercial grade, wall mounted sliding door hardware set designed for fast installation. Precision extruded aluminum box track features a built in fascia that hides the sliding hardware from view. Jump-proof, strong 3-wheel hangers are completely adjustable. The 2610F is for interior use only and not suited for external applications.• Set Includes: (1ea) aluminum box track with built-in fascia, (1pr) tricycle

ball-bearing hangers; (1ea) adjustable floor guide; (1pr) track end caps, (2ea) track stops; wrench & instructions.

Specifications:• For installation of one door up to 125lb.• For door thickness of 1” to 1-3/4”, top mount hardware.• Adjustable and detachable, tricycle ball-bearing carriers.• NOTE: For bi-parting/converging sliding doors, order 2 sets.• 1125 Optional ball-bearing wheels are available for doors weighing up

to 200lbs.• NEW! Optional 1060 Soft-Close Mechanism, see pg 337.• 1 set/box. Sold per set.


2610F481 48” 1 x 24” Door Aluminum




2610F48B 48” 1 x 24” Door Dark Bronze




Wall-Mount Track Only w/FasciaJohnson 2610F Series

• Precision extruded aluminum box track features a built in fascia that hides the sliding hardware from view.

• Track only, door hangers, end caps and screws not included.• NOTE: For bi-parting/converging sliding doors, order 2.• 10/box. Sold individually.

Product # Finish Length

2610-ALUM-72 Aluminum 72”



2610-BRNZ-72 Dark Bronze 72”



Track End CapsJohnson 2610F

• Johnson 2610F Aluminum End Caps.• 2-3/8”H.• For use with Johnson 2610F track with fascia.• 1 pr/box. Sold per pair.

Product # Finish

2680PLBG Aluminum

2682PLBG Dark Bronze

Track StopJohnson 2610 Series

• Johnson 1155 track stop for use with Johnson 2610 Series box track.• 2 required per track.• 1/box. Sold individually.

Product # Finish

1155J Zinc

Adjustable Wall Mount Door Guide

• Molded nylon guide provides a sure smooth glide.• Adjustable for 1-3/8” to 1-3/4” thick doors.• #6 pan head screws included.

• 1/box. Sold individually.

Product # Finish

12J White























oor Track Systems


920 Flat Rail Sliding Door Track Set

New Item! • Flat Steel Bar Track Set For 3ft Opening, Single Door Application.• Track Set Includes: (1ea.) 72” flat steel bar track, (2ea.) Hangers with

fasteners for 1-3/8” or 1-3/4” doors; (4ea.) Spacers to fasten track to the wall; (2ea.) Adjustable end stops; (2ea.) Anti-jump discs; (1ea.) concealed floor guide; (1pr.) exposed floor guides.

Specifications:• Accommodates openings of up to 36” wide; for openings wider than 36”

use multiple kits with optional splice.• For doors 1-3/8” to 1-3/4” thick weighing up to 200 lbs.• Construction: Wheels, 2-1/4” tread diameter. 2-3/4” overall diameter.• Door Hanger Apron: 1/4” thick x 1-9/16”W x 11” H.• 1/box. Sold individually.

Product # Description Finish

N186-960 72” Track Set Oil Rubbed Bronze

N187-001 Track Splice Oil Rubbed Bronze

922 Stainless Steel Sliding Door Track Set

New Item! Stainless Steel Track Set For 3ft. Opening, Single Door Application.• Track Set Includes: (1ea.) 72” stainless steel track, (2ea.) Hangers with

fasteners for 1-3/8” or 1-3/4” doors; (4ea.) track brackets with spacers; (2ea.) Door stops; (1ea.) concealed floor guide; (1pr.) exposed floor guides.

Specifications:• Accommodates openings of up to 36” wide; for openings wider than 36”

use multiple kits with optional splice.• For doors 1-3/8” to 1-3/4” thick weighing up to 200 lbs.• Use track splice# N187-002 to connect multiple pieces of track.• Construction: Wheels, 2-5/32” overall diameter.• 1/box. Sold individually.


N186-962 72” Track Set Satin Stainless Steel

N187-002 Track Splice Satin Stainless Steel






To Order – Call 509.535.1663 or 800.888.1663W


oor Track Systems


Flat Track Set w/Arrowhead Hangers105 Series

• RW 105 Series Flat Steel Bar Track Sets For Single Door Application.• Track Set Includes: (1ea.) Flat steel bar track with mounting holes, (1pr.)

Arrowhead Flat Track Rollers with fasteners; (4/5ea.) Flat Track Wall Spac-ers/Track Brackets; (1pr.) Anti-Jump Blocks; (2ea.) end stops. Track mount-ing hardware not included, may vary depending on application.

Specifications:• For door up to 1-3/4” thick weighing up to 400lbs.• Head Clearance: 5-3/4” From top of door to top of hanger assembly.• Construction: Wheels, 2-1/8” tread diameter, sealed bearings. 2-3/4”

overall diameter.• Door Hanger Apron: 3/16” thick x 2” W x 11-3/8” H.• 1 set/box. Sold per set.

Product # Length Opening Finish

105-SET-6-ARROW 72” 36” Black

105-SET-8-ARROW 96” 48” Black

Flat Track Set w/Standard Hangers105 Series

• RW 105 Series Flat Steel Bar Track Sets For Single Door Application.• Track Set Includes: (1ea.) Flat steel bar track with mounting holes, (1pr.)

Arrowhead Flat Track Rollers with fasteners; (4/5ea.) Flat Track Wall Spac-ers/Track Brackets; (1pr.) Anti-Jump Blocks; (2ea.) end stops. Track mount-ing hardware not included, may vary depending on application.

Specifications:• For door up to 1-3/4” thick weighing up to 400lbs.• Head Clearance: 5-3/4” From top of door to top of hanger assembly.• Construction: Wheels, 2-1/8” tread diameter, sealed bearings. 2-3/4”

overall diameter.• Door Hanger Apron: 3/16” thick x 2” W x 11-3/8” H.• 1 set/box. Sold per set.

Product # Length Opening Finish

105-SET-6-STD 72” 36’’ Black

105-SET-8-STD 96” 48” Black

Flat Steel Bar Track105 Series

• Steel bar track for doors up to 400lbs.• 2”H x 1/4” thick.• Track only, hangers and other track components sold separately.• 1/box. Sold individually.

Product # Length # of Mounting Holes Finish

0105-00111-072SC 72” 4 Black

0105-00111-096SC 96” 5 Black

0105-00111-120SC 120” 6 Black












oor Track Systems


Standard Flat Track Door Hangers105 Series

• Door hangers/rollers only, flat track and other track components sold separately.

Specifications:• For doors up to 1-3/4” thick weighing up to 400lbs.• Head Clearance: 5-3/4” From top of door to top of hanger assembly.• Construction: Wheels, 2-1/8” tread diameter, sealed bearings. 2-3/4”

overall diameter.• Apron: 3/16” thick x 2” W x 11-1/2” H.• 3/8” lag bolts included.• 1 pr/box. Sold per pair.

Product # Finish

0105-00201SC Black

Arrowhead Flat Track Door Hangers105 Series

• Door hangers/rollers only, flat track and other track components sold separately.

Specifications:• For doors up to 1-3/4” thick weighing up to 400lbs.• Head Clearance: 5-3/4” From top of door to top of hanger assembly.• Construction: Wheels, 2-1/8” tread diameter, sealed bearings. 2-3/4”

overall diameter.• Apron: 3/16” thick x 2” W x 11-1/2” H.• 3/8” lag bolts included.• 1 pr/box. Sold per pair.

Product # Finish

0105-01201SC Black

Flat Track Wall Spacers/Track Brackets105 Series

• Wall Spacers/Track Brackets - space the flat track off the wall 1-3/8”.Specifications:• Overall Size: 1-5/8” diameter x 1-3/8” projection.• One spacer required per hole in track, see track specifications.• Fasteners not included, may vary depending on application.• 1/box. Sold individually.

Product # Finish

0105-00118SC Black

Flat Track End Stops105 Series

• 105 Series Flat Track end stops.• Fasteners not included, may vary depending on application.• Overall size: 2”H x 1-1/2”D.• 1/box. Sold individually.

Product # Finish

0105-00110SC Black

Flat Track Anti-Jump Block105 Series

• 105 Series Flat Track Anti-Jump Block used to provide extra safety to prevent doors from coming off track especially in high traffic usage.

• Design allows block to pivot out of the way so door can be hung on track. Once the door is hung, pivot the blocks back to prevent the door from coming off the track.

• 1-1/4” diameter x 3/8”H.• 1 pair per door recommended.• 1 pr/box. Sold per pair.

Product # Finish

0105-00126 Black

Heavy-Duty Guide Roller - Floor Mount

• Heavy-duty guide roller for large sliding doors.• Features large 2-1/2” diameter, high impact nylon roller, covered with a

steel frame.• Frame: 6”L x 2”W x 2-3/4”H.• Fasteners not included.• 1/box. Sold individually.

Product # Finish

0054-00003SC Black








To Order – Call 509.535.1663 or 800.888.1663W


oor Track Systems


Adjustable Heavy-Duty Guide Roller - Wall Mount

• Heavy-duty guide roller for large sliding doors 1-1/2” to 2-3/4” thick.• Adjustable and reversible.• Features 2-1/2” diameter, high impact nylon roller and steel frame.• Frame: 4-1/2”L x 1-1/4”W x 2-1/2”H.• Fasteners not included.• 1/box. Sold individually.

Product # Finish

0058-00002SC Black

Rattle-Free Concealed Floor Door Guide

• This floor-mounted, concealed door guide is designed for rattle-free movement of sliding doors.

• Groove Size in bottom of door: 3/8”(10mm)W x 25/32”(20mm)H.• Overall Size: 2-3/8”L x 1-5/16”W x 13/16”H.• Screws not included.• 1/box. Sold individually.

Product # Finish

940-40-031 Black

Floor Mounted Door Guide

• This floor-mounted door guide is designed for smooth movement of sliding doors.

• Groove Size (required in bottom of door): 1/4”(6mm) W x 7/8”(22mm) H.• Overall Size: 2-1/4”L x 1-5/16”W x 1”H.• Screws not included.• 1/box. Sold individually.

Product # Finish

407-01-997 Gray

Bow Door Pulls

• Perfect for barn door style applications.• Constructed of malleable iron.• Fasteners included.• Handle & base width: 1”.• 1/box. Sold individually.

Product # Length Projection Finish

0081-00001SC 6-3/8” 1-1/2” Black

0081-00002SC 8-1/8” 2-1/16” Black

Flush Door Pull

• Large scale design, perfect for barn door style applications.• Requires 7/8” deep mortise, for minimum door thickness of 1-3/4”.• Overall size: 4”W x 6”H.• Cutout size: 2”W x 3-5/8”H.• Fasteners Included.• 1/box. Sold individually.

Product # Finish

0070-00005SC Black

Flush Door Pull

• Perfect for barn door style applications.• Requires 7/8” deep mortise, for minimum door thickness of 1-3/8”.• Overall size: 3-3/8”W x 5-1/4”H.• Cutout size: 2-13/16”W x 3-13/16”H.• Fasteners included.• 1/box. Sold individually.

Product # Finish

0535-00489SC Black










SLIDING DOOR TRACK SYSTEMSBypass D

oor Track Hardw

are

Bypass Door Track Hardware

ByPass Door Track Set - 150lb.Stanley BP150 Series

Set Includes: (2ea) 72” aluminum track; (2pr) four-wheel hangers; (2pr) hanger plates; (1ea) adjustable floor guide; (2ea) track spacers; wrench, screws and instructions.• For installation of 2 by-passing doors weighing up to 150lbs. each; 1-3/8”

to 1-3/4” thick.• Large 1” wheels provide smooth action.• Easy to install snap-in feature makes hangers a “snap” to install. Vertical

adjustments can be made after installation.• Durable V-groove aluminum track (included), provides smooth, quiet

operation.• Track spacer allows for easy installation of 1-3/4” bypass doors.

Specifications:• Four Wheel Hanger: 1-1/2” W x 2-1/8” L.• Track: 1-13/16”W x 1-1/8”H. each• 1 set/box. Sold per set.


BPC150N-00-72 72” Aluminum

BPC150N-00-96 96” Aluminum

Single Aluminum Sliding TrackStanley BP150/BP250 Series







BP250-01-120 120” Aluminum

Bypass Ball-Bearing Door Hanger Set - 250lb.Stanley BP250 Series

• Set Includes: (2pr.) hanger plates; (2pr.) four-wheel, ball-bearing hangers; (1ea.) wrench; and (1ea.) adjustable floor guide for 1-3/8” to 1-3/4” thick bypassing doors.

• For installation of 2 bypassing doors weighing up to 250lbs. each.• Large 1” wheels provide smooth action.• Easy to install snap-in feature makes hangers a “snap” to install. Vertical


Specifications:• Four Wheel Hanger: 1-1/2” W x 2-1/8” L.• 1 set/box. Sold per set.

Product #

BP250N-HDW

Bypass Door Hanger Set - 150lb.Stanley BP150 Series

• Set Includes: (2pr.) hanger plates; (2pr.) four-wheel hangers; (1ea.) wrench; and (1ea.) adjustable floor guide for 1-3/8” to 1-3/4” thick bypass-ing doors.

• For installation of 2 bypassing doors weighing up to 150lbs. each.• Large 1” wheels provide smooth action.• Easy to install snap-in feature makes hangers a “snap” to install. Vertical


Specifications:• Four Wheel Hanger: 1-1/2” W x 2-1/8” L.• 1 set/box. Sold per set.

Product #

BP150N-HDW









To Order – Call 509.535.1663 or 800.888.1663Bypass D

oor Track Hardw

areSLIDING DOOR TRACK SYSTEMS

Spacer for BP250N Track

• For installing BP250N Stanley Track in by-passing door applications for 1-3/4” doors (spacer not needed for 1-3/8” door applications)

• To use, clip track units together using spacers - one at each end and one in the middle for track 72” and over. Secure all screw in track & remove plastic track spacer.

• Overall Size: 3-1/8”L x 3/4”W x 1-5/8”H.• 1 pr/box. Sold per pair.

Product #

BP250-00

Center Stop for BP250 TrackBP150/BP250 Series

• Center Stop attaches to track to limit panel travel.• For use with Stanley BP250 track (sold separately).• Overall Size: 1-5/8”L x 1-3/16”W• 1/box. Sold individually.

Product # Finish

BP250-77 Zinc

ByPass Door Track Set - 60lb.Stanley BP60 Series

Set Includes: (1ea) galvanized steel track; (4ea) adjustable hangers; (2ea) brass plated finger pulls; (1ea) adjustable floor guide; screws and instruc-tions.• For installation of 2 by-passing doors weighing up to 60lbs. each; 3/4” to

1-3/8” thick• Slotted hangers make it easy to adjust and remove panels.• 7/8” diameter, self-aligning wheel system.• 1 set/box. Sold per set.

Product # Opening Finish

S403-040 48” Galvanized




Offset Bypass Hangers - 60lb.Stanley BP60 Series

• Single-Wheel Offset Hangers for use on Stanley BP60 light duty track systems.

• Slotted hangers make it easy to adjust and remove panels.• 7/8” diameter, self-aligning wheel system.• Permanently lubricated thermoplastic wheels.• Screws included.• 50 pr/box. Sold per pair.

Product # Offset Finish

BP60-44 1/4” Zinc

BP60-46 1/2” Zinc

Adjustable Floor Guide

• For use on bypassing doors 3/4” to 1-3/8” thick.• Includes screws.• 50/box. Sold individually.

Product # Finish

BP150-71 Zinc

Adjustable Floor Guide

• For use on bypassing doors 1-3/8” to 1-3/4” thick.• Includes screws.• 50/box. Sold individually.

Product # Finish

BP250-71 Zinc

Adjustable Floor Guide & Carpet Riser

• For use on bypassing doors 3/4” or 1-3/8” thick.• Includes screws.• 10/box. Sold individually.


2135PPK1 Floor Guide Brown

2136PPK1 Carpet Riser Zinc
















oor Track Hardw

are


6004 Double Aluminum Bypass TrackGrant 6034/6064 Series

Top Line Grant 6034 is medium duty sliding door hardware for by-passing installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• For use with 6034/6064 Series By-Pass Door Track Components.• Dust free track design.• Pre-drilled extruded aluminum track.• Mounting holes approx. 2” from each end and on approx. 13” centers.• Screws not included (#8 flat head recommended).• 1/box. Sold individually.




050-470 120” Aluminum

ByPass Door Ball-Bearing Carrier Set - 50lb.Grant 6034 Series

• Set Includes: (2ea) 6320 single-wheel 3/16” offset ball-bearing carriers, (2ea) 6330 single-wheel 1/2” offset ball-bearing carriers, (1ea) 114 adjust-able floor guide, screws and installation instructions.

• Grant 6034 Series Medium-Duty Carrier Set - For ByPass Door installa-tions.

• For door thickness 3/4” or 1-3/8”, side mount, adjustable.• For doors up to 50 lbs. each.• Ball-bearing wheels.• Dual set of mounting holes; ideal for hollow core doors.• Easy-turn cam for 1/4” vertical adjustment.• Quick door hanging by tilting pre-mounted hardware onto track profile• Headroom: 1-1/8” min. to 1-3/8” max.• For use with Grant 6004 Track (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-331-7 Zinc

ByPass Door Ball-Bearing Carriers - 50lb.Grant 6034 Series

• Carrier 6320: Single-wheel, 3/16” offset ball-bearing carrier and screws.• Carrier 6330: Single-wheel, 1/2” offset ball-bearing carrier and screws.

• Grant 6034 Series Medium-Duty Carriers - For ByPass Door installations.• For door thickness 3/4” or 1-3/8”, side mount, adjustable.• For doors up to 50 lbs. each.• Ball-bearing wheels.• Dual set of mounting holes; ideal for hollow core doors.• Easy-turn cam for 1/4” vertical adjustment.• Quick door hanging by tilting pre-mounted hardware onto track profile• Headroom: 1-1/8” min. to 1-3/8” max.• For use with Grant 6004 Track (sold separately).• 1/box. Sold individually.


113-333-3 Carrier 6320 - 3/16” Offset Zinc

113-333-4 Carrier 6330 - 1/2” Offset Zinc

ByPass Door Ball-Bearing Carrier Set - 75lb.Grant 6064 Series

• Set Includes: (2ea) 6350 dual-wheel 3/16” offset ball-bearing carriers, (2ea) 6360 dual-wheel 1/2” offset ball-bearing carriers, (1ea) 114 adjust-able floor guide, screws and installation instructions.

• Grant 6064 Series Medium-Duty Carrier Set - For ByPass Door installa-tions.

• For door thickness 3/4” or 1-3/8”, side mount, adjustable.• For doors up to 75 lbs. each.• Ball-bearing wheels.• Dual set of mounting holes; ideal for hollow core doors.• Easy-turn cam for 1/4” vertical adjustment.• Quick door hanging by tilting pre-mounted hardware onto track profile• Headroom: 1-1/8” min. to 1-3/8” max.• For use with Grant 6004 Track (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-332-5 Zinc










oor Track Hardw







113-440-1 72” Aluminum

113-440-2 96” Aluminum

113-440-3 120” Aluminum

75E Ball-Bearing Door Carrier Set - 75lb.Grant 75E Series

• Set Includes: (2ea) 50E four-wheel ball-bearing carriers, (2ea) quick release top plate, 110 floor guide, screws and installation instructions.


• For door thickness 3/4” minimum, top mount.• For doors up to 75 lbs.• Precision ball-bearing wheels.• Spring loaded, quick release mechanism for easy door installation and


Product # Finish

113-533-3 Gray






113-443-3 72” Aluminum

113-443-4 96” Aluminum

113-443-5 120” Aluminum

ByPass Ball-Bearing Carrier Set - 150lb.Grant 150E Series

• Set Includes: (4ea) 150E four-wheel ball-bearing carriers, (4ea) spring-loaded quick release top plate, (1ea) 114 adjustable floor guide, screws and installation instructions.

• Grant 150E Series Medium-Duty Carrier Set - For ByPass Door installa-tions.

• For door thickness 1-3/8” and 1-3/4”, top mount, adjustable.• For doors up to 150 lbs.• Precision ball-bearing wheels.• Spring loaded, quick release mechanism for easy door installation and


Product # Finish

113-533-6 Gray












oor Track Hardw

are

Bypass Door Track Hardware7003 Aluminum Double I-Beam By-Pass TrackTop Line Grant 7000 Series

Top Line Grant 7000 Series - A medium duty commercial and residential grade sliding door hardware series ideal for by-passing installations. Ap-plications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• For use with Top Line Grant 7000 Series Bypass Door Components.• Pre-drilled extruded aluminum I-Beam track; jump proof design.• Overall Size: 1-23/32”W x 15/16”H; .085 thick aluminum.• Mounting holes approx. every 11” on center.• Screws not included (#8 pan head recommended).• Tracks under 8’ notched at one end for easy access.• 1/box. Sold individually.




050-537 120” Aluminum

72-138 By-Pass Ball-Bearing Carrier Set - 150lb.Grant 7000 Series - (for 1-3/8” Doors)


• Grant 72-138 Medium-Duty Carrier Set - For ByPass Door installations.• For door thickness 1-3/8”, side mount, adjustable.• For doors up to 150 lbs.• Steel, precision ball-bearing wheels.• Pivoting rocker arms ensure track-carrier contact.• Ball and socket suspension compensates for minor header misalignment.• Lock nut ensures permanent positioning.• 1/4” vertical adjustment.• Headroom: 1-7/8” min. to 2-1/8” max.• For use with Grant 7003 and 7005 Tracks (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-336-3 Zinc


• Set Includes: (4ea) 7000 four-wheel ball-bearing carriers, (2ea) 7034 front door aprons, (2ea) 7138 rear door aprons, (1ea) 118 floor guide, wrench, screws and installation instructions.

• Grant 72-134 Medium-Duty Carrier Set - For ByPass Door installations.• For door thickness 1-3/4”, side mount, adjustable.• For doors up to 150 lbs.• Steel, precision ball-bearing wheels.• Pivoting rocker arms ensure track-carrier contact.• Ball and socket suspension compensates for minor header misalignment.• Lock nut ensures permanent positioning.• 1/4” vertical adjustment.• Headroom: 1-7/8” min. to 2-1/8” max.• For use with Grant 7003 and 7007 Track (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-335-8 Zinc


• Grant 7014 Track Mounted Bumper Stop with Rubber Bumper.• For use with Grant 7001, 7003 & 7005 Aluminum I-Beam track.• 2 required per track.• 1/box. Sold individually.

Product # Finish

050-561 Zinc









oor Track Hardw


7005 Double I-Beam Track w/FasciaTop Line Grant 7000 Series - (for 1-3/8” Doors)


• For use with Top Line Grant 7000 Series Bypass Door Components.• For 1-3/8” thick by-passing doors.• Pre-drilled extruded aluminum I-Beam track; jump proof design.• Track Size: 2-7/16”W x 15/16”H; .085” thick aluminum.• Includes 2-3/8”H fascia in a decorative anodized aluminum finish.• Mounting holes approx. every 11” on center.• Screws not included (#8 pan head recommended).• Tracks under 8’ notched at one end for easy access.• 1/box. Sold individually.




050-551 120” Aluminum



• Grant 72-138 Medium-Duty Carrier Set - For ByPass Door installations.• For door thickness 1-3/8”, side mount, adjustable.• For doors up to 150 lbs.• Steel, precision ball-bearing wheels.• Pivoting rocker arms ensure track-carrier contact.• Ball and socket suspension compensates for minor header misalignment.• Lock nut ensures permanent positioning.• 1/4” vertical adjustment.• Headroom: 1-7/8” min. to 2-1/8” max.• For use with Grant 7003 and 7005 Tracks (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-336-3 Zinc

7007 Double I-Beam Track w/FasciaTop Line Grant 7000 Series - (for 1-3/4” Doors)


• For use with Top Line Grant 7000 Series Bypass Door Components.• For 1-3/4” thick by-passing doors.• Pre-drilled extruded aluminum I-Beam track; jump proof design.• Track Size: 3-11/32”W x 15/16”H; .085” thick aluminum.• Includes 2-3/8”H fascia in a decorative anodized aluminum finish.• Mounting holes approx. every 11” on center.• Screws not included (#8 pan head recommended).• Tracks under 8’ notched at one end for easy access.• 1/box. Sold individually.




050-558 120” Aluminum


• Set Includes: (4ea) 7000 four-wheel ball-bearing carriers, (2ea) 7034 front door aprons, (2ea) 7138 rear door aprons, (1ea) 118 floor guide, wrench, screws and installation instructions.

• Grant 72-134 Medium-Duty Carrier Set - For ByPass Door installations.• For door thickness 1-3/4”, side mount, adjustable.• For doors up to 150 lbs.• Steel, precision ball-bearing wheels.• Pivoting rocker arms ensure track-carrier contact.• Ball and socket suspension compensates for minor header misalignment.• Lock nut ensures permanent positioning.• 1/4” vertical adjustment.• Headroom: 1-7/8” min. to 2-1/8” max.• For use with Grant 7003 and 7007 Track (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-335-8 Zinc












oor Track Hardw

are


By-Pass Track Set w/Fascia - 125lb.Johnson 138F Series - (for 1-3/8” Doors)

Commercial/residential grade sliding bypass hardware system with aluminum fascia track that hides hangers from view. Patented “tricycle” hangers with 1” dia. wheels ride smoothly and quietly on convex shaped rails with single point contact. Hangers feature a quick disconnect clip system facilitating easy mounting or dismounting of door panels. Hangers are adjustable for height in case of settling.• Set Includes: (1ea) by-pass track with fascia; (2 or 4pr) tricycle hangers;

floor guide(s); door stop(s); wrench, screws & instructions.

Specifications:• For installation of by-passing doors, 1-3/8” thick up to 125lbs. each.• Adjustable and detachable tricycle hangers allow for easy door installa-

tion and removal; top mounted to door.• 1125 Optional ball-bearing wheels are available for doors weighing up



138F482D 48” - 2 Door Aluminum




138F482BRZN 48” - 2 Door Dark Bronze




ByPass/Pocket Door Ball-Bearing Hanger - 200lb.

• Replacement ByPass/Pocket Door hanger for use with Johnson 100, 138F, 134F and 2610 Series Track and 1500 Series pocket door kits.

• Includes: (1ea) hanger plate; (1ea) three-wheel, ball-bearing hanger; screws.

• For doors weighing up to 200 lbs.• Unique, three wheel design ensures all wheels carry door weight equally.• Smooth rolling 1” diam. balanced wheels.• “Flip-of-a-clip” separates wheels from hanger plate for easy door installa-tion/removal.


Product #

1125

By-Pass Track Set w/Fascia - 125lb.Johnson 134F Series - (for 1-3/4” Doors)

Commercial/residential grade sliding bypass hardware system with aluminum fascia track that hides hangers from view. Patented “tricycle” hangers with 1” dia. wheels ride smoothly and quietly on convex shaped rails with single point contact. Hangers feature a quick disconnect clip system facilitating easy mounting or dismounting of door panels. Hangers are adjustable for height in case of settling.• Set Includes: (1ea) by-pass track with fascia; (2 or 4pr) tricycle hangers;

floor guide(s); door stop(s); wrench, screws & instructions.

Specifications• For installation of by-passing doors, 1-3/4” thick up to 125lbs. each.• Adjustable and detachable tricycle hangers allow for easy door installa-

tion and removal; top mounted to door.• 1125 Optional ball-bearing wheels are available for doors weighing up







ByPass/Pocket Door Hanger - 125lb.

• Replacement ByPass/Pocket Door hanger for use with Johnson 100, 138F, 134F and 2610 Series Track and 1500 Series pocket door kits.

• Includes: (1ea) hanger plate; (1ea) three-wheel hanger; screws.

• For doors weighing up to 125 lbs.• Unique, three wheel design ensures all wheels carry door weight equally.• Smooth rolling 1” diam. balanced wheels.• “Flip-of-a-clip” separates wheels from hanger plate for easy door installa-tion/removal.


Product #

1120
















To Order – Call 509.535.1663 or 800.888.1663M

ulti-Folding and Bi-Fold Door H

ardware


Multi-Folding and Bi-Fold Door Hardware

Single Aluminum Sliding TrackStanley BF125 Series


• Single track only, Stanley door hanger sets sold separately.• For single door, pocket, bypass and bi-fold applications.





BP250-01-120 120” Aluminum

Bi-Fold Ball-Bearing Door Hanger - 125lb.Stanley BF125 Series

• Set Includes: (1ea) hanger plates; (1ea) four-wheel ball-bearing hangers; (1ea) wrench; and screws.

• For installation of a single door weighing up to 125lbs. or multi-panels up to 75lbs. each; 1-1/8” to 1-3/4” thick.


adjustments can be made after installation.• For use with Stanley BP250 track and BF125N-31 pivot set (sold sepa-

rately).

Specifications:• Four Wheel Hanger: 1-1/2” W x 2-1/8” L.• 1/box. Sold individually.

Product # Finish

BF125N-41 Zinc

Bi-Fold Top/Bottom Pivot SetStanley BF125 Series

• Set Includes: (1ea) top pivot assembly; (1ea) bottom pivot assembly; (1ea) door snugger spring; and screws.

• Heavy-duty pivot set designed for durability and aesthetics.• Fits into 1-3/4” deep, 3/8” diam. hole in door.• For use with Stanley BP250 track and BF125N door hangers, (sold sepa-


Product # Finish

BF125N-31 Zinc

Bi-Fold Door Track Set - 30lb.Stanley BF30 Series

• Set Includes: (1ea) pre-finished white steel track; (1ea) door snugger; (1ea) top pivot, bottom pivot and roller guide; (3ea) brass tone zinc non-mortise hinges; (1ea) knob; (1ea) jamb bracket; (1pr) door aligners; screws and instructions.

• For installation of 2 doors weighing up to 30lbs. each; 1” to 1-3/8” thick.• Spring loaded top pivot and roller guide for easy installation.• Permanently lubricated roller guide.• Durable pre-painted white track.• 1 set/box. Sold per set.

Product # Opening Door Configuration

S402-032 36” 2 x 17-3/4”W

S402-044 48” 4 x 11-3/4”W

S402-054 60” 4 x 14-3/4”W

S402-064 72” 4 x 17-3/4”W












SLIDING DOOR TRACK SYSTEMSM


ardware


Bi-Fold Top/Bottom Pivot SetStanley BF50 Series

• Set Includes: (1ea) pivot bracket, (1ea) jamb bracket, (1ea) top pivot; (1ea) bottom pivot; (1ea) door snugger spring, wrench and screws.

• Replacement part for use with Stanley BF50 Bi-Fold Track Sets.• For installation of 2 doors weighing up to 50lbs. each or multi-panels

weighing up to 30lbs. each; 1” to 1-3/4” thick.• 10 set/box. Sold per set.

Product #

BF50-HDW

Universal Bi-Fold Top Pivot/Guide Set

• Universal Bi-Fold Top Pivot/Guide Replacement Set.• Can be used with Johnson Hardware, Acme, Alliance, Cox, National,

Sterling, and E-Z Roll brand door track.• Includes 3/8”and 7/16” diameter pivot posts for multiple application

options.• 10 set/box. Sold per set.

Product #

1832PPK3


The Grant 75E Series is a medium duty commercial and residential grade sliding door hardware series.




113-440-1 72” Aluminum

113-440-2 96” Aluminum

113-440-3 120” Aluminum

Two-Door Hardware Set - 30-50lb.Grant Bi-Fold 50 Series

Grant Bi-Fold 50 - Light-Duty Top-Hung Hardware Set For Two-Door Installation, One-Way.• Set Includes: (1ea) 50E four-wheel ball-bearing carrier with quick release

top plate, (1ea) pivot plate assembly, (1ea) plunger spring assembly, (1ea) floor cam assembly, (3ea) bi-fold hinges, screws and installation instruc-tions.

• For door thickness 3/4” to 1-3/4”, top mount, adjustable.• For bi-fold doors up to 50 lbs./panel and multi-fold doors up to 30 lbs.

per panel.• Doors fold flat for better access, stay-open stay-close design keeps

door in place.• Precision ball-bearing wheels with quick release mechanism.• 5/16” vertical adjustment.• Headroom: 1-27/32” min. to 2-5/32” max.• For use with Grant 50E Track (sold separately).• 1 set/box. Sold per set.

Product # Finish

113-434-7 Gray








To Order – Call 509.535.1663 or 800.888.1663M


ardware


Four-Door Hardware Set - 30-50lb.Grant Bi-Fold 50 Series

• Grant Bi-Fold 50 - Light-Duty Top-Hung Hardware Set For Four-Door Installation, Two Doors Each Way.

• Set Includes: (2ea) 50E four-wheel ball-bearing carriers with quick release top plates, (2ea) pivot plate assembly, (2ea) plunger spring assem-bly, (2ea) floor cam assembly, (6ea) bi-fold hinges, screws and installation instructions.

• For door thickness 3/4” to 1-3/4”, top mount, adjustable.• For bi-fold doors up to 50 lbs./panel and multi-fold doors up to 30 lbs.



Product # Finish

113-524-3 Gray


• Set Includes: (1ea) 50E four-wheel ball-bearing carrier, (1ea) quick release top plate and screws.


• For door thickness 3/4” minimum, top mount.• For doors up to 75 lbs.• Precision ball-bearing wheels.• Quick release mechanism for easy door installation and adjustment.• 7/16” vertical adjustment.• Headroom: 1-25/32” min. to 2-7/32” max.• For use with Grant 50E Track (sold separately).• 1/box. Sold individually.

Product # Finish

113-432-2 Gray

Bi-Fold Hinge SetGrant BF50 Series

• Bi-Fold Hinge Set Includes: (3ea) hinges and #6 x 3/4” screws.• Steel, Zinc plated.• 2-1/2”H x 1-5/8”W; Mortised style.• 1 set/box. Sold per set.

Product # Finish

113-440-7 Zinc

Grant Bi-Fold 50 Multi-Fold Doors:• Up to 6 panels one way• Bi-fold applications up to 50 lbs/panel• Multi-fold applications up to 30lbs/panel.• For each additional set of panels over two add one(1) - Grant carrier 50E

with top plate and two (2) - bi-fold hinge set.








ardware

Multi-Folding and Bi-Fold Door Hardware150E Single Aluminum Sliding TrackGrant 150E Series

The Grant 150E Series is a medium duty commercial and residential grade sliding door hardware series.• For use with Grant 150E Series Single, Bi-Parting, By-Pass and Bi-Fold 150

Series Components.• Pre-drilled aluminum box track.• Overall Size: 1-5/8”W x 15/16”H.• Screws not included (#10 flat head recommended).• NOTE: Single track only, 2 required for bi-parting or by-pass applications.• 1/box. Sold individually.


113-443-3 72” Aluminum

113-443-4 96” Aluminum

113-443-5 120” Aluminum

Two-Door Hardware Set - 75-150lb.Grant Bi-Fold 150 Series

• Grant Bi-Fold 150 - Medium-Duty Top-Hung Hardware Set For Two-Door Installation, One-Way.

• Set Includes: (1ea) 150E four-wheel ball-bearing carrier with quick re-lease top plate, (1ea) pivot plate assembly, (1ea) plunger spring assembly, (1ea) floor cam assembly, screws and installation instructions. Hinges not included.

• For door thickness 1” to 1-3/4”, top mount, adjustable.• For bi-fold doors up to 150 lbs./panel and multi-fold doors up to 75 lbs.



Product # Finish

113-516-7 Gray


• Set Includes: (1ea) four-wheel ball-bearing carrier, (1ea) spring-loaded quick release top plate, and screws.



adjustment.• 1/2” vertical adjustment.• Headroom: 2-1/16” min. to 2-9/16” max.• For use with Grant 150E Track (sold separately).• 1/box. Sold individually.

Product # Finish

113-516-3 Gray

Grant Bi-Fold 150 Multi-Fold Doors:• Up to 6 panels one way• Bi-fold applications up to 150 lbs/panel• Multi-fold applications up to 75lbs/panel.• For each additional set of panels over two add one(1) - Grant carrier 150E

with top plate and two (2) - bi-fold hinge set.







To Order – Call 509.535.1663 or 800.888.1663M


ardware



Heavy-Duty Single I-Beam TrackJohnson 200WM Series

• Johnson 200WM Single, Precision Extruded Aluminum I-Beam track - for single, bi-parting and folding door applications.

• Track only. Door hangers, all other components sold separately.• NOTE: For bi-parting/converging sliding doors, order 2.



200-0048 48” Aluminum

200-0060 60” Aluminum

200-0072 72” Aluminum

200-0096 96” Aluminum

200-00120 120” Aluminum

200-00144 144” Aluminum

Multi-Fold Two-Door Base Hardware Set “A” - 75lb.Johnson 200RD Series

• Base Hardware Set “A” contains all the pivots, brackets, hangers and mounting screws to hang the 1st pair of panels from a single jamb. Order base hardware set “A” (2015BS-A) for the first pair of panels off jamb as indicated.

• Order 1 set when all panels operate from a single direction. when all panels operate from a single direction. Order 2 sets when panels will operate from two directions, converging panels that meet in the middle of the opening. Order one add-on hardware set “B” (JOH-2002PLBG) for every pair of panels after Base Set “A” as indicated.

• Set Includes: (1ea) 2002 four-wheel ball-bearing carrier, (2ea) 2001 top pivot plates, (1ea) 2010 top pivot lock, (1ea) 2007 bottom pivot assembly, (1ea) 2011 pivot bracket, adjustment wrench, door aligner, knob, and mounting screws. Hinges not included.

Specifications:• For door thickness 1-1/8” to 1-3/4”.• For bi-fold doors up to 75 lbs./panel.• Hardware for panels 12” to 36”W x 108”H max.• Installs on heavy-duty I-Beam track (sold separately) with positive pivot-

lock, top hung four-wheel ball-bearing hangers, heavy-duty bottom pivot, floor bracket with screw adjusting bottom pivot socket.

• 1 set/box. Sold per set.

Product # Finish

2015BS-A Zinc

Multi-Fold Add-on Hardware Set “B” - 75lb.Johnson 200RD Series

• Order one add-on hardware set “B” for every pair of panels after Base Set “A” as indicated.

• Set Includes: (1ea) 2002 four-wheel ball-bearing carrier, (1ea) 2001 top pivot plate, and mounting screws. Hinges not included.

Specifications:• For door thickness 1-1/8” to 1-3/4”.• For bi-fold doors up to 75 lbs./panel.• Hardware for panels 12” to 36”W x 108”H max.• Installs on heavy-duty I-Beam track (sold separately).• 1/box. Sold individually.

Product # Finish

2002PLBG Zinc













ardware


Bi-Fold, Ball-Bearing Mortise HingesJohnson 200RD Series

• 3-1/2”H x 3-1/2”W• Ball-Bearing hinges with #6 x 3/4” screws.• Mortised style, for folding door applications.

• 1 pr/box. Sold per pair.

Product # Finish

2003-SN Satin Nickel

Double Locking Bi-Fold Door Hinge

• Dark brown powder coated finish on metal die-casting with nylon and brass plated steel spring mechanism.

• Now with 4 positive stops: Locks at 0º, stops at 90º and 135º and locks again at 180º.

• Minimum stile width of 1-1/8”.• Overall Size: 2-1/2”W x 2-9/16”H.• Requires (8) - #5x5/8” flat head mounting screws (sold separately).• 10/box. Sold individually.

Product # Finish

HS8303L Brown

Non-Mortise Bi-Fold Door Hinge

• Overall Height: 3-1/2” (89mm).• Pin Diameter: 1/4” (6mm).• Leaf Width: 1” (25mm).• #6 x 5/8” wood screws included.• 1/box. Sold individually.

Product # Finish

H03-03970-144 Zinc

Non-Mortise Bifold Door Hinge

• For use on 1” or thicker wood doors.• Height: 3”; Pin diameter: 1/4”; Leaf width: 7/8” & 5/8”.• Wrought steel construction, includes screws.• 10 pr/box. Sold per pair.

Product # Finish

S402-134 Satin Brass

Non-Mortise Bi-Fold Hinge

• 3”H x 1-5/16”W overall.• No Mortising, leaves only a 1/16” gap.• Includes screws.• 50/box. Sold individually.

Product # Finish

HS2663L Bronze

HS2663N Nickel

HS2663P Polished Brass

Non Mortise Bi-Fold Hinge

• 3”H x 1-5/16”W overall.• No Mortising, leaves only a 1/16” gap.• Uses #5 wood screws, sold separately.• 50/box. Sold individually.

Product # Finish

HSFHX2663D Antique Brass

HSFHX2663L Bronze

HSFHX2663P Polished Brass

Folding Closet Door Lock - (Keyed Different)

• For any two or four-door bi-fold installation.• Includes strike, finishing ring and two keys.• For 3/4” to 1-3/8” thick doors,• 5/box. Sold individually.

Product # Finish

PB1064-US26D Brushed Chrome

PB1064-US3 Polished Brass














To Order – Call 509.535.1663 or 800.888.1663Pocket D

oor Hardw


Pocket Door Hardware

Single Aluminum Sliding TrackStanley PD150 Series

• Stanley durable v-groove aluminum track for use with Stanley BP150 / BP250 / PD150 / BF125 Series hangers.






BP250-01-120 120” Aluminum

Pocket Door Hanger Set - 150lb.Stanley PD150 Series

Set Includes: (2ea) hanger plates; (2ea) four-wheel hangers; (1ea) door guide; (1ea) wrench; (1ea) bumper stop; nails, screws & instructions.• For installation of pocket or bi-parting doors, 1” to 1-3/4” thick, weighing

up to 150lbs. each.• Large 1” wheels provide smooth action.• Easy to install snap-in feature makes hangers a “snap” to install. Vertical


Specifications:• Four Wheel Hanger: 1-1/2” W x 2-1/8” L.• Wheel Diameter: 1”.• 1 set/box. Sold per set.

Product #

PD150N-HDW

Pocket Door Track Set - 75lb.Stanley PD75 Series

• Set Includes: (1ea) galvanized steel track; (2ea) adjustable hangers; adjustable door guide (for pocket installations); adjustable door guide (for along-the-wall installations); door stop (for along-the-wall installa-tions; bumper stop (for pocket installations); adjusting wrench, screws and instructions.

• For installation of one sliding pocket or along-the-wall door weighing up to 75lbs.; 3/4” to 1-3/4” thick.

• Pre-finished v-shaped track is jump-proof.• Twin-wheel hangers provide smooth and quiet operation.• Adjust-n-lock, permanently lubricated, 2-wheel hangers provide up to

5/8” vertical adjustment and locks in one easy motion.• Self-aligning wheel system.• 1 set/box. Sold per set.










SLIDING DOOR TRACK SYSTEMSPocket D

oor Hardw

are

Universal Pocket Door Frame Kit - 125lb.to 200lb.Johnson 1500 Series

• Set Includes: (1ea) frame header with preinstalled heavy-duty aluminum track; (2ea) steel wrapped upright pairs; (2ea) self-adjusting floor anchors; (2ea) 3-wheel door hangers, (1ea) door guide; (1ea) door stop; wrench, screws and instructions.

• Easily assembled and structurally strong pocket door frame.• Designed for fast installation in standard 2 x 4 timber or steel frame walls

typically sheeted with drywall.• Versatile frames can be used in block walls and adapted for use in thicker

walls or cut down to accept any smaller size door.• Frames can be cut down to fit any smaller size door.• NEW! Optional 1060 Soft-Close Mechanism, see pg 337.• 1 set/box. Sold per set.

Product # Max. Door Width

Max. Door Height

Max. Door Thickness

Max. Door Weight

153068PF 36” (3’-0) 80” (6’-8”) 1-3/8” 125lb.

153070PF 36” (3’-0) 84” (7-’0”) 1-3/4” 200lb.

154068PF 48” (4’-0) 80” (6’-8”) 1-3/4” 200lb.

Pocket Door Hanger Set - 125lb.Johnson 100/1500 Series

Set Includes: (2ea) hanger plates; (2ea) three-wheel hangers; (2ea) door guides; (1ea) wrench; (1ea) bumper stop; screws & instructions.

• For installation of one bypassing or pocket door weighing up to 125 lbs.• Unique, three wheel design ensures all wheels carry door weight equally.• Smooth rolling 1” diam. balanced wheels.• For use with Johnson 100 Series Aluminum track also featured in the

1500 Series Pocket Door Kits (not included).• 1 set/box. Sold per set.

Product #

10311502

ByPass/Pocket Door Hanger - 125lb.Johnson 100/1500 Series

• Replacement ByPass/Pocket Door hanger for use with Johnson 100 Series Track and 1500 Series pocket door kits.

• Includes: (1ea) hanger plate; (1ea) three-wheel hanger; screws.

• For installation of one bypassing or pocket door weighing up to 125 lbs.• Unique, three wheel design ensures all wheels carry door weight equally.• Smooth rolling 1” diam. balanced wheels.• “Flip-of-a-clip” separates wheels from hanger plate for easy door installa-tion/removal.


Product #

1120

ByPass/Pocket Door Ball-Bearing Hanger - 200lb.Johnson 100/1500 Series

• Replacement ByPass/Pocket Door hanger for use with Johnson 100 Series Track and 1500 Series pocket door kits.

• Includes: (1ea) hanger plate; (1ea) three-wheel, ball-bearing hanger; screws.

• For installation of one bypassing or pocket door weighing up to 200 lbs.• Unique, three wheel design ensures all wheels carry door weight equally.• Smooth rolling 1” diam. balanced wheels.• “Flip-of-a-clip” separates wheels from hanger plate for easy door installa-tion/removal.


Product #

1125








To Order – Call 509.535.1663 or 800.888.1663Pocket D

oor Hardw


Soft-Close Hanger SetJohnson 100/1500 Series

New Item!Johnson Soft-Close Hanger Set - making your sliding doors soft close quietly and securely!

• For doors up to 200lbs.• Use with new or existing Johnson 100/1500 Series (including 134F, 138F

and 2610F by-pass track sets).• 1060 is used with 1125 Hanger (sold separately), or when door is to be

both, “soft-close” and “soft-open”.• To equip door for both “soft-open” and “soft-close”, order 2 sets.• Pocket Door: Min. 28” width for soft-open and soft-close.• Bypass and Wall Mount Door: Min. 24” Width for both soft-open and

soft-close.• 1 set/box. Sold per set.

Product #

1060

Adapter Kit For 1-3/4” Thick DoorJohnson 1500 Series

• Adapter kit for use when installing 1-3/4” thick doors on Johnson 1500 Series Pocket Door Frames.


Product # Finish

1575PPK3 Zinc

Converging Door Kit For Joining 2 Pocket FramesJohnson 1500 Series

• Converging Door Kit for joining two Johnson 1500, 1560, 2511, 2710 or 2711 Series Pocket Door Frames.


Product # Finish

1555PPK3 Zinc

Pocket Door Floor Guide

• Adjusts to center door in pocket.• For use with 1-3/8” thick doors.• 50/box. Sold individually.

Product # Finish

PD250-74 Zinc

Pocket Door Guides

• Johnson Pocket Door Guide.• Screws included.• 100 pr/box. Sold per pair.

Product # Finish

1550 White

Door Bumper For Pocket Door Application

• Made of durable rubber, screw included.• 100/box. Sold individually.

Product # Finish

1513 Beige









SLIDING DOOR TRACK SYSTEMSPocket D

oor Hardw

are

Pocket Door Hardware

Pocket Door EZ Closer

• Allows you to quickly release the pocket door from its cavity with one push and also prevents the pocket door from slamming into the pocket frame when the door is being opened.

• Spring loaded action works as a shock absorber, which helps prevent damage to the pocket door hardware.

• Easy to install; fits most door styles.• Glass filled nylon body, durability tested & requires no maintenance.• WATCH DEMO VIDEO ONLINE at www.thehardwarehut.com

Specifications: • Face plate: 2-3/8”H x 1-1/8”W.• Plunger projection: 1-1/8”.• Overall Length (including plunger): 5”.• Body Size: 3-3/4”L x 11/16” diameter.• 1/box. Sold individually.

Product # Finish

EZ-CLOSER-PK Gray

Johnson Multi-Door Catch

New Item!• Used in multi-slide, door applications where one door is used to pull the

entire series of doors.• Works with three or more passing doors or two or more pocket door.• 1 set/box. Sold per set.

Product #

2054PLBG

Sliding Wood Door Track

Plastic Track Set for Sliding Wood Doors

• Set Includes: (1ea) upper guide; (1ea) lower guide.• Typically used for installation of 2 by-passing sliding doors.• Can be easily cut to length.• Installs quickly and easily with nails or glue.• 10 set/box. Sold per set.

Product # Door Thickness Length Finish

P2413TAN48 1/8” 48” Tan

P2413TAN72 1/8” 72” Tan

P2417TAN48 1/4” 48” Tan

P2417TAN60 1/4” 60” Tan

P2417TAN72 1/4” 72” Tan

P2417WAL48 1/4” 48” Brown

P2417WAL72 1/4” 72” Brown

P2421TAN48 1/2” 48” Tan

P2421TAN60 1/2” 60” Tan

P2419TAN48 3/4” 48” Tan

P2419TAN72 3/4” 72” Tan

Fiber Track & Nylon Guide

• Fiber Track for 1/4” to 3/4” thick sliding doors.• Track Size: 1/8”W x 1/2”H.• Use with nylon guides 1-3/8”L x 3/8”W (sold separately).• 1/box. Sold individually.


2401FIBRE72 72” Track Black

2407 Nylon Guide White

















To Order – Call 509.535.1663 or 800.888.1663Sliding W

ood Door Track


Plastic Guide Track

• Features flanged edges and barbed shoulders.• For single or by-pass sliding doors, use on top and bottom of cabinet.• Use with upper and lower press-fit guides (sold separately).• Maximum Door Weight: 26lbs. (12kg).• 1/box. Sold individually.


404-14-111 98-7/16” (2.5m) Brown

35mm Press-Fit Upper Guide

• Press-fit upper glide/guide for use with Hafele plastic guide track.• Concealed profile & smooth operation.• Features adjustable guide, lockable at 5mm & 8mm depths.• Requires 35mm diameter holes in door.• 1/box. Sold individually.

Product # Finish

404-19-118 Brown

35mm Press-Fit Bottom Guide

• Press-fit lower guide for Hafele plastic guide track.• Glides friction free in the track recess.• Features vertically adjustable steel spindle, nylon roller & guide.• Requires 35mm diameter hole in door.• 1/box. Sold individually.

Product # Finish

404-20-139 Brown

Metal Track for Single Sliding Wood Doors

• 21/32”W x 5/16”H single door track for sliding wood doors.• Use with 402STL or 594NYLON door sheaves (sold separately.)• Ideal for larger wood door installations, can be easily cut to fit any opening.• Can be surface or recess mounted.• 1/box. Sold individually.


455STL144 144” Steel

Metal Track for Double Sliding Wood Doors

• 1”W x 1/4”H double door track for sliding wood doors.• Use with Knape and Vogt 402STL or 594NYLON door sheaves (sold

separately.)• Ideal for larger wood door installations, can be easily cut to fit any opening.• Can be surface or recess mounted.• 1/box. Sold individually.


469ZC144 144” Steel

Ball Bearing Door Sheave

• Case Size: 1-1/4” x 5/16”.• Flange Size: 2-1/4” x 5/16”.• For use with 455STL144 and 469ZC144 door tracks.• 100/box. Sold individually.

Product # Finish

402STL Steel

Nylon Round Groove Wheel

• For doors up to 1-1/8” thick.• Frame Size: 2-15/16”x 1/2”; Wheel Size: 1-3/16” diameter.• For use with 455STL144 and 469ZC144 door tracks.• 100/box. Sold individually.

Product # Finish

594NYLON Steel










SLIDING DOOR TRACK SYSTEMSSliding G

lass Door Track

Sliding Glass Door Track

Roll-Ezy Ball-Bearing Track SetFor 1/4” Thick, Large Glass Sliding Doors

• Application: Provides smooth, ball bearing track system for sliding 1/4” glass doors to move back and forth with ease. Ideal for larger glass door installations used in retail display cases, trophy cases, locking visible stor-age units, and more.

• Options: Sold in complete packaged sets or individual components that can easily cut to fit any opening up to 12 feet.

• Complete Sets Include: (1ea) 993 upper double channel; (2ea) 995 shoe; (2ea) 997 ball-bearing carrier; (1ea) 999 lower double track.

Specifications:• For installation of 2 by-passing 1/4” thick sliding glass doors.• Ideal for larger door installations.• Ball-bearing carrier features free-rolling balls on 3” centers.• A wide divider on upper channel maintains door position.• Zinc coated upper and lower channels.• KV recommends that the height to width ratio for glass doors should not

exceed 2:1. Glass to be cut 1-1/4” shorter than height of opening.

Product # Description Finish Qty/Box

Packaged Sets

P992ZC48 48” Complete Set Zinc1 set/box. Sold per set.P992ZC60 60” Complete Set Zinc

P992ZC72 72” Complete Set Zinc

Individual Components

993ZC144 144” Upper Channel Zinc

1/box. Sold individually.

995ZC144 144” Glass Door Shoe Zinc

997ZC144 144” Ball Bearing Carrrier Zinc

999ZC144 144” Lower Track Zinc

Roll-Ezy Aluminum Track SetFor 1/4” Thick, Small to Med. Glass Sliding Doors

• Application: Provides smooth track system for lightweight, sliding glass doors to move back and forth with ease. Ideal for small to medium glass door installations, such as reception windows and small retail display cases.

• Options: Sold in complete packaged sets or individual components that can easily cut to fit any opening up to 12 feet.

• Set Includes: (1ea) 1093 double channel upper track; (4ea) 1097 nylon roller press; (4ea) vinyl guide; (2ea) 1095 door shoe; 1099 double lower track.

Specifications:• For installation of 2 by-passing 1/4” thick, small to medium sliding glass

doors.• Load rating: 20lbs. per door.• Recessed or surface mounted; installs easily with with nails or glue.• A wide divider on upper channel maintains door position.• Components can be easily cut for custom opening sizes.• Corrosion free, anodized aluminum finish.• KV recommends that the height to width ratio for glass doors should not

exceed 2:1. Glass is cut 1-1/4in. shorter than height of opening.

Product # Description Finish Qty/Box

Packaged Sets

P1092ANOD48 48” Complete Set Aluminum1 set/box. Sold per set.P1092ANOD60 60” Complete Set Aluminum

P1092ANOD72 72” Complete Set Aluminum

Individual Components

1085VINYL Vinyl Guide Gray

1/box. Sold individually.

1087RUB Rubber Bumper Black

1093-144 144” Double Channel Aluminum

1095-144 144” Door Shoe Aluminum

1097NYLON Roller Press Zinc

1099-144 144” Double Track Aluminum

















Documents

Sliding Door Track Systems 303-340 · SLIDING DOOR TRACK SYSTEMS Sliding Door Track Systems ..... 303-340 Soft-Close Track Systems ..... 305-306, 337 ... • 1 set/box